path: root/chip/mchp/registers-mec172x.h

/* Copyright 2021 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 *
 * Register map for Microchip MEC172x family controllers
 */

#ifndef __CROS_EC_REGISTERS_H
#error "This header file should not be included directly."
#endif

/*
 * IRQ Numbers
 * NOTE: GIRQ22 aggregated output and its sources are not connected to
 * the NVIC.
 */
#define MCHP_IRQ_GIRQ8 0
#define MCHP_IRQ_GIRQ9 1
#define MCHP_IRQ_GIRQ10 2
#define MCHP_IRQ_GIRQ11 3
#define MCHP_IRQ_GIRQ12 4
#define MCHP_IRQ_GIRQ13 5
#define MCHP_IRQ_GIRQ14 6
#define MCHP_IRQ_GIRQ15 7
#define MCHP_IRQ_GIRQ16 8
#define MCHP_IRQ_GIRQ17 9
#define MCHP_IRQ_GIRQ18 10
#define MCHP_IRQ_GIRQ19 11
#define MCHP_IRQ_GIRQ20 12
#define MCHP_IRQ_GIRQ21 13
#define MCHP_IRQ_GIRQ23 14
#define MCHP_IRQ_GIRQ24 15
#define MCHP_IRQ_GIRQ25 16
#define MCHP_IRQ_GIRQ26 17
/* GIRQ13 direct sources */
#define MCHP_IRQ_I2C_0 20
#define MCHP_IRQ_I2C_1 21
#define MCHP_IRQ_I2C_2 22
#define MCHP_IRQ_I2C_3 23
#define MCHP_IRQ_I2C_4 158
/* GIRQ14 direct sources */
#define MCHP_IRQ_DMA_0 24
#define MCHP_IRQ_DMA_1 25
#define MCHP_IRQ_DMA_2 26
#define MCHP_IRQ_DMA_3 27
#define MCHP_IRQ_DMA_4 28
#define MCHP_IRQ_DMA_5 29
#define MCHP_IRQ_DMA_6 30
#define MCHP_IRQ_DMA_7 31
#define MCHP_IRQ_DMA_8 32
#define MCHP_IRQ_DMA_9 33
#define MCHP_IRQ_DMA_10 34
#define MCHP_IRQ_DMA_11 35
#define MCHP_IRQ_DMA_12 36
#define MCHP_IRQ_DMA_13 37
#define MCHP_IRQ_DMA_14 38
#define MCHP_IRQ_DMA_15 39
/* GIRQ15 direct sources */
#define MCHP_IRQ_UART0 40
#define MCHP_IRQ_UART1 41
#define MCHP_IRQ_EMI0 42
#define MCHP_IRQ_EMI1 43
#define MCHP_IRQ_EMI2 44
#define MCHP_IRQ_ACPIEC0_IBF 45
#define MCHP_IRQ_ACPIEC0_OBE 46
#define MCHP_IRQ_ACPIEC1_IBF 47
#define MCHP_IRQ_ACPIEC1_OBE 48
#define MCHP_IRQ_ACPIEC2_IBF 49
#define MCHP_IRQ_ACPIEC2_OBE 50
#define MCHP_IRQ_ACPIEC3_IBF 51
#define MCHP_IRQ_ACPIEC3_OBE 52
#define MCHP_IRQ_ACPIEC4_IBF 53
#define MCHP_IRQ_ACPIEC4_OBE 54
#define MCHP_IRQ_ACPIPM1_CTL 55
#define MCHP_IRQ_ACPIPM1_EN 56
#define MCHP_IRQ_ACPIPM1_STS 57
#define MCHP_IRQ_8042EM_OBE 58
#define MCHP_IRQ_8042EM_IBF 59
#define MCHP_IRQ_MAILBOX_DATA 60
#define MCHP_IRQ_BDP0 62
/* GIRQ16 direct sources */
#define MCHP_IRQ_PKE 65
#define MCHP_IRQ_NDRNG 67
#define MCHP_IRQ_AESH 68
/* GIRQ17 direct sources */
#define MCHP_IRQ_PECI_HOST 70
#define MCHP_IRQ_TACH_0 71
#define MCHP_IRQ_TACH_1 72
#define MCHP_IRQ_TACH_2 73
#define MCHP_IRQ_TACH_3 159
#define MCHP_IRQ_FAN0_FAIL 74
#define MCHP_IRQ_FAN0_STALL 75
#define MCHP_IRQ_FAN1_FAIL 76
#define MCHP_IRQ_FAN1_STALL 77
#define MCHP_IRQ_ADC_SNGL 78
#define MCHP_IRQ_ADC_RPT 79
#define MCHP_IRQ_RCID0 80
#define MCHP_IRQ_RCID1 81
#define MCHP_IRQ_RCID2 82
#define MCHP_IRQ_LED0_WDT 83
#define MCHP_IRQ_LED1_WDT 84
#define MCHP_IRQ_LED2_WDT 85
#define MCHP_IRQ_LED3_WDT 86
#define MCHP_IRQ_PHOT 87
/* GIRQ18 direct sources */
#define MCHP_IRQ_SLAVE_SPI 90
#define MCHP_IRQ_QMSPI0 91
#define MCHP_IRQ_SPI0_TX 92
#define MCHP_IRQ_SPI0_RX 93
#define MCHP_IRQ_SPI1_TX 94
#define MCHP_IRQ_SPI1_RX 95
#define MCHP_IRQ_BCM0_ERR 96
#define MCHP_IRQ_BCM0_BUSY 97
#define MCHP_IRQ_PS2_0 100
#define MCHP_IRQ_EEPROM 155
#define MCHP_IRQ_CCT_TMR 146
#define MCHP_IRQ_CCT_CAP0 147
#define MCHP_IRQ_CCT_CAP1 148
#define MCHP_IRQ_CCT_CAP2 149
#define MCHP_IRQ_CCT_CAP3 150
#define MCHP_IRQ_CCT_CAP4 151
#define MCHP_IRQ_CCT_CAP5 152
#define MCHP_IRQ_CCT_CMP0 153
#define MCHP_IRQ_CCT_CMP1 154
/* GIRQ19 direct sources */
#define MCHP_IRQ_ESPI_PC 103
#define MCHP_IRQ_ESPI_BM1 104
#define MCHP_IRQ_ESPI_BM2 105
#define MCHP_IRQ_ESPI_LTR 106
#define MCHP_IRQ_ESPI_OOB_UP 107
#define MCHP_IRQ_ESPI_OOB_DN 108
#define MCHP_IRQ_ESPI_FC 109
#define MCHP_IRQ_ESPI_RESET 110
#define MCHP_IRQ_ESPI_VW_EN 156
#define MCHP_IRQ_ESPI_SAF_DONE 166
#define MCHP_IRQ_ESPI_SAF_ERR 166
#define MCHP_IRQ_ESPI_SAF_CACHE 169
/* GIRQ20 direct sources */
#define MCHP_IRQ_OTP 173
#define MCHP_IRQ_CLK32K_MON 174
/* GIRQ21 direct sources */
#define MCHP_IRQ_WDG 171
#define MCHP_IRQ_WEEK_ALARM 114
#define MCHP_IRQ_SUBWEEK 115
#define MCHP_IRQ_WEEK_SEC 116
#define MCHP_IRQ_WEEK_SUBSEC 117
#define MCHP_IRQ_WEEK_SYSPWR 118
#define MCHP_IRQ_RTC 119
#define MCHP_IRQ_RTC_ALARM 120
#define MCHP_IRQ_VCI_OVRD_IN 121
#define MCHP_IRQ_VCI_IN0 122
#define MCHP_IRQ_VCI_IN1 123
#define MCHP_IRQ_VCI_IN2 124
#define MCHP_IRQ_VCI_IN3 125
#define MCHP_IRQ_VCI_IN4 126
#define MCHP_IRQ_PS20A_WAKE 129
#define MCHP_IRQ_PS20B_WAKE 130
#define MCHP_IRQ_KSC_INT 135
#define MCHP_IRQ_GLUE 172
/* GIRQ23 direct sources */
#define MCHP_IRQ_TIMER16_0 136
#define MCHP_IRQ_TIMER16_1 137
#define MCHP_IRQ_TIMER16_2 138
#define MCHP_IRQ_TIMER16_3 139
#define MCHP_IRQ_TIMER32_0 140
#define MCHP_IRQ_TIMER32_1 141
#define MCHP_IRQ_CNTR_TM0 142
#define MCHP_IRQ_CNTR_TM1 143
#define MCHP_IRQ_CNTR_TM2 144
#define MCHP_IRQ_CNTR_TM3 145
#define MCHP_IRQ_RTOS_TIMER 111
#define MCHP_IRQ_HTIMER0 112
#define MCHP_IRQ_HTIMER1 113
/* Must match CONFIG_IRQ_COUNT in config_chip.h */
#define MCHP_IRQ_MAX 180

/* Block base addresses */
#define MCHP_WDG_BASE 0x40000400
#define MCHP_TMR16_0_BASE 0x40000c00
#define MCHP_TMR32_0_BASE 0x40000c80
#define MCHP_CNT16_0_BASE 0x40000d00
#define MCHP_DMA_BASE 0x40002400
#define MCHP_PROCHOT_BASE 0x40003400
#define MCHP_I2C0_BASE 0x40004000
#define MCHP_I2C1_BASE 0x40004400
#define MCHP_I2C2_BASE 0x40004800
#define MCHP_I2C3_BASE 0x40004C00
#define MCHP_I2C4_BASE 0x40005000
#define MCHP_CACHE_CTRL_BASE 0x40005400
#define MCHP_PWM_0_BASE 0x40005800
#define MCHP_TACH_0_BASE 0x40006000
#define MCHP_PECI_BASE 0x40006400
#define MCHP_SPIEP_BASE 0x40007000
#define MCHP_RTMR_BASE 0x40007400
#define MCHP_ADC_BASE 0x40007c00
#define MCHP_ESPI_SAF_BASE 0x40008000
#define MCHP_TFDP_BASE 0x40008c00
#define MCHP_GPSPI0_BASE 0x40009400
#define MCHP_GPSPI1_BASE 0x40009480
#define MCHP_HTIMER_BASE 0x40009800
#define MCHP_KEYSCAN_BASE 0x40009c00
#define MCHP_RPM2PWM0_BASE 0x4000a000
#define MCHP_RPM2PWM1_BASE 0x4000a080
#define MCHP_VBAT_BASE 0x4000a400
#define MCHP_VBAT_RAM_BASE 0x4000a800
#define MCHP_WKTIMER_BASE 0x4000ac80
#define MCHP_VCI_BASE 0x4000ae00
#define MCHP_BBLED_0_BASE 0x4000B800
#define MCHP_BCL_0_BASE 0x4000cd00
#define MCHP_INT_BASE 0x4000e000
#define MCHP_EC_BASE 0x4000fc00

#define MCHP_QMSPI0_BASE 0x40070000
#define MCHP_ESPI_SAF_COMM_BASE 0x40071000

#define MCHP_PCR_BASE 0x40080100
#define MCHP_GPIO_BASE 0x40081000
#define MCHP_OTP_BASE 0x40082000

#define MCHP_MBOX_BASE 0x400f0000
#define MCHP_8042_BASE 0x400f0400
#define MCHP_ACPI_EC_0_BASE 0x400f0800
#define MCHP_ACPI_PM1_BASE 0x400f1c00
#define MCHP_PORT92_BASE 0x400f2000
#define MCHP_UART0_BASE 0x400f2400
#define MCHP_UART1_BASE 0x400f2800
#define MCHP_LPC_BASE 0x400f3000
#define MCHP_ESPI_IO_BASE 0x400f3400
#define MCHP_ESPI_MEM_BASE 0x400f3800
#define MCHP_GLUE_BASE 0x400f3c00
#define MCHP_EMI_0_BASE 0x400f4000
#define MCHP_EMI_1_BASE 0x400f4400
#define MCHP_EMI_2_BASE 0x400f4800
#define MCHP_RTC_BASE 0x400f5000
#define MCHP_BDP0_BASE 0x400f8000
#define MCHP_ESPI_VW_BASE 0x400f9c00
#define MCHP_CHIP_BASE 0x400fff00

#ifndef __ASSEMBLER__

/*
 * Helper function for RAM address aliasing
 * NOTE: MEC17xx and MEC15xx AHB controllers do NOT require aliasing.
 * Cortex-M4 bit-banding does require aliasing of the
 * DATA SRAM region.
 */
#define MCHP_RAM_ALIAS(x) ((x) >= 0x118000 ? (x)-0x118000 + 0x20000000 : (x))

/* EC Chip Configuration */
/* 16-bit Device ID */
#define MCHP_CHIP_DEV_ID REG16(MCHP_CHIP_BASE + 0x1E)
/* 8-bit Device Sub ID */
#define MCHP_CHIP_DEV_SUB_ID REG8(MCHP_CHIP_BASE + 0x1D)
/* 8-bit Device Revision */
#define MCHP_CHIP_DEV_REV REG8(MCHP_CHIP_BASE + 0x1C)
/* All in one */
#define MCHP_CHIP_DEVRID32 REG32(MCHP_CHIP_BASE + 0x1C)
#define MCHP_CHIP_DEVID_POS 16
#define MCHP_CHIP_DEVID_MASK (0xfffful << MCHP_CHIP_DEVID_POS)
#define MCHP_CHIP_SUBID_POS 8
#define MCHP_CHIP_SUBID_MASK (0xfful << MCHP_CHIP_SUBID_POS)
#define MCHP_CHIP_REV_POS 0
#define MCHP_CHIP_REV_MASK (0xfful << MCHP_CHIP_REV_POS)
#define MCHP_CHIP_EXTRACT_DEVID(d) \
	(((uint32_t)(d)&MCHP_CHIP_DEVID_MASK) >> MCHP_CHIP_DEVID_POS)
#define MCHP_CHIP_EXTRACT_SUBID(d) \
	(((uint32_t)(d)&MCHP_CHIP_SUBID_MASK) >> MCHP_CHIP_SUBID_POS)
#define MCHP_CHIP_EXTRACT_REV(d) \
	(((uint32_t)(d)&MCHP_CHIP_REV_MASK) >> MCHP_CHIP_REV_POS)

/* PCR clock control dividers */
#define MCHP_PCR_CLK_CTL_FASTEST 1U
#define MCHP_PCR_CLK_CTL_96MHZ 1U
#define MCHP_PCR_CLK_CTL_48MHZ 2U
#define MCHP_PCR_CLK_CTL_24MHZ 4U
#define MCHP_PCR_CLK_CTL_12MHZ 8U

/* Number of PCR Sleep Enable, Clock Required, and Reset registers */
#define MCHP_PCR_SLP_RST_REG_MAX 5

/* Sleep 0: Sleep Enable, Clock Required, and Reset bits */
#define MCHP_PCR_JTAG BIT(0) /* CLKREQ only */
#define MCHP_PCR_OTP BIT(1)
#define MCHP_PCR_ISPI BIT(2)

/* Command all blocks to sleep */
#define MCHP_PCR_SLP_EN0_JTAG BIT(0)
#define MCHP_PCR_SLP_EN0_OTP BIT(1)
#define MCHP_PCR_SLP_EN0_ISPI BIT(2)
#define MCHP_PCR_SLP_EN0_SLEEP 0xffffffff

/*
 * Encode register number and bit position
 * b[4:0] = bit number
 * b[10:8] = zero based register number
 */
#define MCHP_PCR_ERB(rnum, bnum) ((((rnum)&0x0f) << 8) | ((bnum)&0x1f))

/* PCR Sleep 1: Sleep Enable, Clock Required, and Reset bits */
#define MCHP_PCR_BTMR16_1 MCHP_PCR_ERB(1, 31)
#define MCHP_PCR_BTMR16_0 MCHP_PCR_ERB(1, 30)
#define MCHP_PCR_ECS MCHP_PCR_ERB(1, 29)
#define MCHP_PCR_PWM8 MCHP_PCR_ERB(1, 27)
#define MCHP_PCR_PWM7 MCHP_PCR_ERB(1, 26)
#define MCHP_PCR_PWM6 MCHP_PCR_ERB(1, 25)
#define MCHP_PCR_PWM5 MCHP_PCR_ERB(1, 24)
#define MCHP_PCR_PWM4 MCHP_PCR_ERB(1, 23)
#define MCHP_PCR_PWM3 MCHP_PCR_ERB(1, 22)
#define MCHP_PCR_PWM2 MCHP_PCR_ERB(1, 21)
#define MCHP_PCR_PWM1 MCHP_PCR_ERB(1, 20)
#define MCHP_PCR_TACH3 MCHP_PCR_ERB(1, 13)
#define MCHP_PCR_TACH2 MCHP_PCR_ERB(1, 12)
#define MCHP_PCR_TACH1 MCHP_PCR_ERB(1, 11)
#define MCHP_PCR_I2C0 MCHP_PCR_ERB(1, 10)
#define MCHP_PCR_WDT MCHP_PCR_ERB(1, 9)
#define MCHP_PCR_CPU MCHP_PCR_ERB(1, 8)
#define MCHP_PCR_TFDP MCHP_PCR_ERB(1, 7)
#define MCHP_PCR_DMA MCHP_PCR_ERB(1, 6)
#define MCHP_PCR_PMC MCHP_PCR_ERB(1, 5)
#define MCHP_PCR_PWM0 MCHP_PCR_ERB(1, 4)
#define MCHP_PCR_TACH0 MCHP_PCR_ERB(1, 2)
#define MCHP_PCR_PECI MCHP_PCR_ERB(1, 1)
#define MCHP_PCR_ECIA MCHP_PCR_ERB(1, 0)

/* Command all blocks to sleep */
#define MCHP_PCR_SLP_EN1_BTMR16_1 BIT(31)
#define MCHP_PCR_SLP_EN1_BTMR16_0 BIT(30)
#define MCHP_PCR_SLP_EN1_ECS BIT(29)
#define MCHP_PCR_SLP_EN1_PWM_ALL                                              \
	(BIT(4) | BIT(20) | BIT(21) | BIT(22) | BIT(23) | BIT(24) | BIT(25) | \
	 BIT(26) | BIT(27))
#define MCHP_PCR_SLP_EN1_PWM8 BIT(27)
#define MCHP_PCR_SLP_EN1_PWM7 BIT(26)
#define MCHP_PCR_SLP_EN1_PWM6 BIT(25)
#define MCHP_PCR_SLP_EN1_PWM5 BIT(24)
#define MCHP_PCR_SLP_EN1_PWM4 BIT(23)
#define MCHP_PCR_SLP_EN1_PWM3 BIT(22)
#define MCHP_PCR_SLP_EN1_PWM2 BIT(21)
#define MCHP_PCR_SLP_EN1_PWM1 BIT(20)
#define MCHP_PCR_SLP_EN1_TACH3 BIT(13)
#define MCHP_PCR_SLP_EN1_TACH2 BIT(12)
#define MCHP_PCR_SLP_EN1_TACH1 BIT(11)
#define MCHP_PCR_SLP_EN1_I2C0 BIT(10)
#define MCHP_PCR_SLP_EN1_WDT BIT(9)
#define MCHP_PCR_SLP_EN1_CPU BIT(8)
#define MCHP_PCR_SLP_EN1_TFDP BIT(7)
#define MCHP_PCR_SLP_EN1_DMA BIT(6)
#define MCHP_PCR_SLP_EN1_PMC BIT(5)
#define MCHP_PCR_SLP_EN1_PWM0 BIT(4)
#define MCHP_PCR_SLP_EN1_TACH0 BIT(2)
#define MCHP_PCR_SLP_EN1_PECI BIT(1)
#define MCHP_PCR_SLP_EN1_ECIA BIT(0)
/* all sleep enable 1 bits */
#define MCHP_PCR_SLP_EN1_SLEEP 0xffffffff
/*
 * block not used by default
 * Do not sleep ECIA, PMC, CPU and ECS
 */
#define MCHP_PCR_SLP_EN1_UNUSED_BLOCKS 0xdffffede

/* PCR Sleep 2: Sleep Enable, Clock Required 2, Reset bits */
#define MCHP_PCR_GLUE MCHP_PCR_ERB(2, 29)
#define MCHP_PCR_SAF MCHP_PCR_ERB(2, 27)
#define MCHP_PCR_BDP0 MCHP_PCR_ERB(2, 25)
#define MCHP_PCR_ACPI_EC4 MCHP_PCR_ERB(2, 23)
#define MCHP_PCR_ACPI_EC3 MCHP_PCR_ERB(2, 22)
#define MCHP_PCR_ACPI_EC2 MCHP_PCR_ERB(2, 21)
#define MCHP_PCR_ESPI_SCR MCHP_PCR_ERB(2, 20)
#define MCHP_PCR_ESPI MCHP_PCR_ERB(2, 19)
#define MCHP_PCR_RTC MCHP_PCR_ERB(2, 18)
#define MCHP_PCR_MBOX MCHP_PCR_ERB(2, 17)
#define MCHP_PCR_8042 MCHP_PCR_ERB(2, 16)
#define MCHP_PCR_ACPI_PM1 MCHP_PCR_ERB(2, 15)
#define MCHP_PCR_ACPI_EC1 MCHP_PCR_ERB(2, 14)
#define MCHP_PCR_ACPI_EC0 MCHP_PCR_ERB(2, 13)
#define MCHP_PCR_GCFG MCHP_PCR_ERB(2, 12)
#define MCHP_PCR_UART1 MCHP_PCR_ERB(2, 2)
#define MCHP_PCR_UART0 MCHP_PCR_ERB(2, 1)
#define MCHP_PCR_EMI0 MCHP_PCR_ERB(2, 0)

/* Command all blocks to sleep */
#define MCHP_PCR_SLP_EN2_GLUE BIT(29)
#define MCHP_PCR_SLP_EN2_SAF BIT(27)
#define MCHP_PCR_SLP_EN2_BDP0 BIT(25)
#define MCHP_PCR_SLP_EN2_ACPI_EC4 BIT(23)
#define MCHP_PCR_SLP_EN2_ACPI_EC3 BIT(22)
#define MCHP_PCR_SLP_EN2_ACPI_EC2 BIT(21)
#define MCHP_PCR_SLP_EN2_ESPI_SCR BIT(20)
#define MCHP_PCR_SLP_EN2_ESPI BIT(19)
#define MCHP_PCR_SLP_EN2_RTC BIT(18)
#define MCHP_PCR_SLP_EN2_MAILBOX BIT(17)
#define MCHP_PCR_SLP_EN2_MIF8042 BIT(16)
#define MCHP_PCR_SLP_EN2_ACPI_PM1 BIT(15)
#define MCHP_PCR_SLP_EN2_ACPI_EC1 BIT(14)
#define MCHP_PCR_SLP_EN2_ACPI_EC0 BIT(13)
#define MCHP_PCR_SLP_EN2_GCFG BIT(12)
#define MCHP_PCR_SLP_EN2_UART1 BIT(2)
#define MCHP_PCR_SLP_EN2_UART0 BIT(1)
#define MCHP_PCR_SLP_EN2_EMI0 BIT(0)
/* all sleep enable 2 bits */
#define MCHP_PCR_SLP_EN2_SLEEP 0xffffffff

/* PCR Sleep 3: Sleep Enable, Clock Required, and Reset */
#define MCHP_PCR_PWM9 MCHP_PCR_ERB(3, 31)
#define MCHP_PCR_CCT0 MCHP_PCR_ERB(3, 30)
#define MCHP_PCR_HTMR1 MCHP_PCR_ERB(3, 29)
#define MCHP_PCR_CRYPTO MCHP_PCR_ERB(3, 26)
#define MCHP_PCR_LED3 MCHP_PCR_ERB(3, 25)
#define MCHP_PCR_BTMR32_1 MCHP_PCR_ERB(3, 24)
#define MCHP_PCR_BTMR32_0 MCHP_PCR_ERB(3, 23)
#define MCHP_PCR_BTMR16_3 MCHP_PCR_ERB(3, 22)
#define MCHP_PCR_BTMR16_2 MCHP_PCR_ERB(3, 21)
#define MCHP_PCR_I2C4 MCHP_PCR_ERB(3, 20)
#define MCHP_PCR_BCM0 MCHP_PCR_ERB(3, 19)
#define MCHP_PCR_LED2 MCHP_PCR_ERB(3, 18)
#define MCHP_PCR_LED1 MCHP_PCR_ERB(3, 17)
#define MCHP_PCR_LED0 MCHP_PCR_ERB(3, 16)
#define MCHP_PCR_I2C3 MCHP_PCR_ERB(3, 15)
#define MCHP_PCR_I2C2 MCHP_PCR_ERB(3, 14)
#define MCHP_PCR_I2C1 MCHP_PCR_ERB(3, 13)
#define MCHP_PCR_RPMPWM0 MCHP_PCR_ERB(3, 12)
#define MCHP_PCR_KEYSCAN MCHP_PCR_ERB(3, 11)
#define MCHP_PCR_HTMR0 MCHP_PCR_ERB(3, 10)
#define MCHP_PCR_GPSPI0 MCHP_PCR_ERB(3, 9)
#define MCHP_PCR_PS2_0 MCHP_PCR_ERB(3, 5)
#define MCHP_PCR_ADC MCHP_PCR_ERB(3, 3)

/* Command blocks to sleep */
#define MCHP_PCR_SLP_EN3_PWM9 BIT(31)
#define MCHP_PCR_SLP_EN3_CCT0 BIT(30)
#define MCHP_PCR_SLP_EN3_HTMR1 BIT(29)
#define MCHP_PCR_SLP_EN3_CRYPTO BIT(26)
#define MCHP_PCR_SLP_EN3_LED3 BIT(25)
#define MCHP_PCR_SLP_EN3_BTMR32_1 BIT(24)
#define MCHP_PCR_SLP_EN3_BTMR32_0 BIT(23)
#define MCHP_PCR_SLP_EN3_BTMR16_3 BIT(22)
#define MCHP_PCR_SLP_EN3_BTMR16_2 BIT(21)
#define MCHP_PCR_SLP_EN3_I2C4 BIT(20)
#define MCHP_PCR_SLP_EN3_BCM0 BIT(19)
#define MCHP_PCR_SLP_EN3_LED2 BIT(18)
#define MCHP_PCR_SLP_EN3_LED1 BIT(17)
#define MCHP_PCR_SLP_EN3_LED0 BIT(16)
#define MCHP_PCR_SLP_EN3_I2C3 BIT(15)
#define MCHP_PCR_SLP_EN3_I2C2 BIT(14)
#define MCHP_PCR_SLP_EN3_I2C1 BIT(13)
#define MCHP_PCR_SLP_EN3_RPM2PWM0 BIT(12)
#define MCHP_PCR_SLP_EN3_KEYSCAN BIT(11)
#define MCHP_PCR_SLP_EN3_HTMR0 BIT(10)
#define MCHP_PCR_SLP_EN3_GPSPI0 BIT(9)
#define MCHP_PCR_SLP_EN3_PS2_0 BIT(5)
#define MCHP_PCR_SLP_EN3_ADC BIT(3)
#define MCHP_PCR_SLP_EN3_ALL_CRYPTO BIT(26)
/* all sleep enable 3 bits */
#define MCHP_PCR_SLP_EN3_SLEEP 0xffffffff
#define MCHP_PCR_SLP_EN3_PWM_ALL (MCHP_PCR_SLP_EN3_PWM9)

/* PCR Sleep 4: Sleep Enable, Clock Required, Reset */
#define MCHP_PCR_GPSPI1 MCHP_PCR_ERB(4, 22)
#define MCHP_PCR_PSPI MCHP_PCR_ERB(4, 14)
#define MCHP_PCR_PROCHOT MCHP_PCR_ERB(4, 13)
#define MCHP_PCR_RCID2 MCHP_PCR_ERB(4, 12)
#define MCHP_PCR_RCID1 MCHP_PCR_ERB(4, 11)
#define MCHP_PCR_RCID0 MCHP_PCR_ERB(4, 10)
#define MCHP_PCR_QMSPI MCHP_PCR_ERB(4, 8)
#define MCHP_PCR_RPMPWM1 MCHP_PCR_ERB(4, 7)
#define MCHP_PCR_RTMR MCHP_PCR_ERB(4, 6)
#define MCHP_PCR_CNT16_3 MCHP_PCR_ERB(4, 5)
#define MCHP_PCR_CNT16_2 MCHP_PCR_ERB(4, 4)
#define MCHP_PCR_CNT16_1 MCHP_PCR_ERB(4, 3)
#define MCHP_PCR_CNT16_0 MCHP_PCR_ERB(4, 2)
#define MCHP_PCR_PWM11 MCHP_PCR_ERB(4, 1)
#define MCHP_PCR_PWM10 MCHP_PCR_ERB(4, 0)

/* Command blocks to sleep */
#define MCHP_PCR_SLP_EN4_GPSPI1 BIT(22)
#define MCHP_PCR_SLP_EN4_PSPI BIT(14)
#define MCHP_PCR_SLP_EN4_PROCHOT BIT(13)
#define MCHP_PCR_SLP_EN4_RCID2 BIT(12)
#define MCHP_PCR_SLP_EN4_RCID1 BIT(11)
#define MCHP_PCR_SLP_EN4_RCID0 BIT(10)
#define MCHP_PCR_SLP_EN4_QMSPI BIT(8)
#define MCHP_PCR_SLP_EN4_RPMPWM1 BIT(7)
#define MCHP_PCR_SLP_EN4_RTMR BIT(6)
#define MCHP_PCR_SLP_EN4_CNT16_3 BIT(5)
#define MCHP_PCR_SLP_EN4_CNT16_2 BIT(4)
#define MCHP_PCR_SLP_EN4_CNT16_1 BIT(3)
#define MCHP_PCR_SLP_EN4_CNT16_0 BIT(2)
#define MCHP_PCR_SLP_EN4_PWM11 BIT(1)
#define MCHP_PCR_SLP_EN4_PWM10 BIT(0)

/* all sleep enable 4 bits */
#define MCHP_PCR_SLP_EN4_SLEEP 0xffffffff
#define MCHP_PCR_SLP_EN4_PWM_ALL \
	(MCHP_PCR_SLP_EN4_PWM10 | MCHP_PCR_SLP_EN4_PWM11)

/* Allow all blocks to request clocks */
#define MCHP_PCR_SLP_EN0_WAKE (~(MCHP_PCR_SLP_EN0_SLEEP))
#define MCHP_PCR_SLP_EN1_WAKE (~(MCHP_PCR_SLP_EN1_SLEEP))
#define MCHP_PCR_SLP_EN2_WAKE (~(MCHP_PCR_SLP_EN2_SLEEP))
#define MCHP_PCR_SLP_EN3_WAKE (~(MCHP_PCR_SLP_EN3_SLEEP))
#define MCHP_PCR_SLP_EN4_WAKE (~(MCHP_PCR_SLP_EN4_SLEEP))

/* Bit defines for MCHP_PCR_PWR_RST_STS */
#define MCHP_PWR_RST_STS_MASK_RO 0xc8c
#define MCHP_PWR_RST_STS_MASK_RWC 0x170
#define MCHP_PWR_RST_STS_MASK \
	((MCHP_PWR_RST_STS_MASK_RO) | (MCHP_PWR_RST_STS_MASK_RWC))

#define MCHP_PWR_RST_STS_ESPI_CLK_ACT BIT(11) /* RO */
#define MCHP_PWR_RST_STS_32K_ACT BIT(10) /* RO */
#define MCHP_PWR_RST_STS_WDT BIT(8) /* R/WC */
#define MCHP_PWR_RST_STS_JTAG_RSTN BIT(7) /* RO */
#define MCHP_PWR_RST_STS_SYS BIT(6) /* R/WC */
#define MCHP_PWR_RST_STS_VBAT BIT(5) /* R/WC */
#define MCHP_PWR_RST_STS_VTR BIT(4) /* R/WC */
#define MCHP_PWR_RST_STS_HOST BIT(3) /* RO */
#define MCHP_PWR_RST_STS_VCC_PWRGD BIT(2) /* RO */

/* Bit defines for MCHP_PCR_PWR_RST_CTL */
#define MCHP_PCR_PWR_HOST_RST_SEL_BITPOS 8
#define MCHP_PCR_PWR_HOST_RST_PCI_RESET BIT(8)
#define MCHP_PCR_PWR_HOST_RST_ESPI_PLTRST 0
#define MCHP_PCR_PWR_OK_INV_BITPOS 0

/* Bit defines for MCHP_PCR_SYS_RST */
#define MCHP_PCR_SYS_SOFT_RESET BIT(8)

/*
 * PCR Peripheral Reset Lock register
 * MEC152x PCR Peripheral reset registers do not reset on
 * peripheral sleep. The peripheral is reset immediately.
 * Firmware must write an unlock value to this new lock
 * register, write to PCR reset enable register(s), and
 * write a lock value.
 */
#define MCHP_PCR_RST_LOCK REG32(MCHP_PCR_BASE + 0x84)
#define MCHP_PCR_RST_LOCK_VAL 0xa6382d4d
#define MCHP_PCR_RST_UNLOCK_VAL 0xa6382d4c

/* PCR VBAT soft reset. Trigger a VBAT reset */
#define MCHP_PCR_VBAT_SRST REG32(MCHP_PCR_BASE + 0x88)
#define MCHP_PCR_VBAT_SRST_EN BIT(0)

/* PCR 32KHz clock source select */
#define MCHP_PCR_CK32_SS REG32(MCHP_PCR_BASE + 0x8c)
#define MCHP_PCR_CK32_SEL_MASK GENMASK(1, 0)
#define MCHP_PCR_CK32_SEL_SIL 0
#define MCHP_PCR_CK32_SEL_XTAL 1
#define MCHP_PCR_CK32_SEL_PIN 2
#define MCHP_PCR_CK32_SEL_OFF 3

/* PCR 32KHz period count (RO) */
#define MCHP_PCR_CK32_PER_CNT REG32(MCHP_PCR_BASE + 0xc0)
#define MCHP_PCR_CD32_PER_CNT_MSK GENMASK(15, 0)

/* PCR 32KHz high pulse count (RO) */
#define MCHP_PCR_CK32_HP_CNT REG32(MCHP_PCR_BASE + 0xc4)
#define MCHP_PCR_CK32_HP_CNT_MSK GENMASK(15, 0)

/* PCR 32KHz minimum acceptable period count */
#define MCHP_PCR_CK32_MIN_PER_CNT REG32(MCHP_PCR_BASE + 0xc8)
#define MCHP_PCR_CK32_MIN_PER_CNT_MSK GENMASK(15, 0)

/* PCR 32KHz maximum acceptable period count */
#define MCHP_PCR_CK32_MAX_PER_CNT REG32(MCHP_PCR_BASE + 0xcc)
#define MCHP_PCR_CK32_MAX_PER_CNT_MSK GENMASK(15, 0)

/* PCR 32KHz duty cycle variation count (RO) */
#define MCHP_PCR_CK32_DC_VAR_CNT REG32(MCHP_PCR_BASE + 0xd0)
#define MCHP_PCR_CK32_DC_VAR_CNT_MSK GENMASK(15, 0)

/* PCR 32KHz duty cycle variation acceptable maximum */
#define MCHP_PCR_CK32_DC_VAR_MAX REG32(MCHP_PCR_BASE + 0xd4)
#define MCHP_PCR_CK32_DC_VAR_MAX_MSK GENMASK(15, 0)

/* PCR 32KHz valid count */
#define MCHP_PCR_CK32_VAL_CNT REG32(MCHP_PCR_BASE + 0xd8)
#define MCHP_PCR_CK32_VAL_CNT_MSK GENMASK(7, 0)

/* PCR 32KHz valid count minimum */
#define MCHP_PCR_CK32_MIN_VAL_CNT REG32(MCHP_PCR_BASE + 0xdc)
#define MCHP_PCR_CK32_MIN_VAL_CNT_MSK GENMASK(7, 0)

/* PCR 32KHz control */
#define MCHP_PCR_CK32_CTRL REG32(MCHP_PCR_BASE + 0xe0)
#define MCHP_PCR_CK32_CTRL_MSK (GENMASK(2, 0) | BIT(4) | BIT(24))
#define MCHP_PCR_CK32_CTRL_PER_EN BIT(0)
#define MCHP_PCR_CK32_CTRL_DC_EN BIT(1)
#define MCHP_PCR_CK32_CTRL_VAL_EN BIT(2)
#define MCHP_PCR_CK32_CTRL_SRC_SIL BIT(3)
#define MCHP_PCR_CK32_CTRL_CLR_CNT BIT(24)

/* PCR 32KHz interrupt status */
#define MCHP_PCR_CK32_INTR_STS REG8(MCHP_PCR_BASE + 0xe4)
/* PCR 32KHz interrupt enable */
#define MCHP_PCR_CK32_INTR_EN REG8(MCHP_PCR_BASE + 0xe8)
#define MCHP_PCR_CK32_INTR_PULSE_RDY BIT(0)
#define MCHP_PCR_CK32_INTR_PASS_PER BIT(1)
#define MCHP_PCR_CK32_INTR_PASS_DUTY BIT(2)
#define MCHP_PCR_CK32_INTR_FAIL BIT(3)
#define MCHP_PCR_CK32_INTR_STALL BIT(4)
#define MCHP_PCR_CK32_INTR_VALID BIT(5)
#define MCHP_PCR_CK32_INTR_UNWELL BIT(6)

/* EC Subsystem */
#define MCHP_EC_AHB_ERR REG32(MCHP_EC_BASE + 0x04)
#define MCHP_EC_ID_RO REG32(MCHP_EC_BASE + 0x10)
#define MCHP_EC_AHB_ERR_EN REG32(MCHP_EC_BASE + 0x14)
#define MCHP_EC_INT_CTRL REG32(MCHP_EC_BASE + 0x18)
#define MCHP_EC_TRACE_EN REG32(MCHP_EC_BASE + 0x1c)
#define MCHP_EC_JTAG_EN REG32(MCHP_EC_BASE + 0x20)
#define MCHP_EC_WDT_CNT REG32(MCHP_EC_BASE + 0x28)
#define MCHP_EC_PECI_DISABLE REG8(MCHP_EC_BASE + 0x40)
#define MCHP_EC_VCI_FW_OVRD REG32(MCHP_EC_BASE + 0x50)
#define MCHP_EC_BROM_STS REG32(MCHP_EC_BASE + 0x54)
#define MCHP_EC_VW_SRC_CFG REG32(MCHP_EC_BASE + 0x90)
#define MCHP_EC_CMP_CTRL REG32(MCHP_EC_BASE + 0x94)
#define MCHP_EC_CMP_SLP_CTRL REG32(MCHP_EC_BASE + 0x98)

/* AHB ERR Disable bit[0]=0(enable), 1(disable) */
#define MCHP_EC_AHB_ERROR_ENABLE 0
#define MCHP_EC_AHB_ERROR_DISABLE 1

/* MCHP_EC_JTAG_EN bit definitions */
#define MCHP_JTAG_ENABLE 0x01
/* bits [2:1] */
#define MCHP_JTAG_MODE_4PIN 0x00
/* ARM 2-pin SWD plus 1-pin Serial Wire Viewer (ITM) */
#define MCHP_JTAG_MODE_SWD_SWV 0x02
/* ARM 2-pin SWD with no SWV */
#define MCHP_JTAG_MODE_SWD 0x04

/* EC Interrupt aggregator (ECIA) */
#define MCHP_INT_GIRQ_LEN 20 /* 5 32-bit registers */
#define MCHP_INT_GIRQ_FIRST 8
#define MCHP_INT_GIRQ_LAST 26
#define MCHP_INT_GIRQ_NUM (26 - 8 + 1)
/* MCHP_INT_GIRQ_FIRST <= x <= MCHP_INT_GIRQ_LAST */
#define MCHP_INTx_BASE(x) (MCHP_INT_BASE + (((x)-8) * MCHP_INT_GIRQ_LEN))

/*
 * GPIO GIRQ's are not direct capable
 * GIRQ08 GPIO 0140 - 0176
 * GIRQ09 GPIO 0100 - 0136
 * GIRQ10 GPIO 040 - 076
 * GIRQ11 GPIO 000 - 036
 * GIRQ12 GPIO 0200 - 0236
 * GIRQ26 GPIO 0240 - 0276
 * Other GIRQ's not direct capable:
 * GIRQ22 wake peripheral clock only
 * GIRQ24, GIRQ25 eSPI host to endpoint virtual wires
 */
#define MCHP_INT_AGGR_ONLY_BITMAP                                            \
	(BIT(8) | BIT(9) | BIT(10) | BIT(11) | BIT(12) | BIT(22) | BIT(24) | \
	 BIT(25) | BIT(26))

#define MCHP_INT_DIRECT_CAPABLE_BITMAP                                         \
	(BIT(13) | BIT(14) | BIT(15) | BIT(16) | BIT(17) | BIT(18) | BIT(19) | \
	 BIT(20) | BIT(21) | BIT(23))

/* GIRQ13 I2C controllers 0 - 4. Direct capable */
#define MCHP_INT13_I2C(x) BIT(x)

/* GIRQ14 DMA channels 0 - 15. Direct capable */
#define MCHP_INT14_DMA(x) BIT(x)

/* GIQ15 interrupt sources. Direct capable */
#define MCHP_INT15_UART_0 BIT(0)
#define MCHP_INT15_UART_1 BIT(1)
#define MCHP_INT15_EMI_0 BIT(2)
#define MCHP_INT15_EMI_1 BIT(3)
#define MCHP_INT15_EMI_2 BIT(4)
#define MCHP_INT15_ACPI_EC0_IBF BIT(5)
#define MCHP_INT15_ACPI_EC0_OBE BIT(6)
#define MCHP_INT15_ACPI_EC1_IBF BIT(7)
#define MCHP_INT15_ACPI_EC1_OBE BIT(8)
#define MCHP_INT15_ACPI_EC2_IBF BIT(9)
#define MCHP_INT15_ACPI_EC2_OBE BIT(10)
#define MCHP_INT15_ACPI_EC3_IBF BIT(11)
#define MCHP_INT15_ACPI_EC3_OBE BIT(12)
#define MCHP_INT15_ACPI_EC4_IBF BIT(13)
#define MCHP_INT15_ACPI_EC4_OBE BIT(14)
#define MCHP_INT15_ACPI_PM1_CTL BIT(15)
#define MCHP_INT15_ACPI_PM1_EN BIT(16)
#define MCHP_INT15_ACPI_PM1_STS BIT(17)
#define MCHP_INT15_8042_OBE BIT(18)
#define MCHP_INT15_8042_IBF BIT(19)
#define MCHP_INT15_MAILBOX BIT(20)
#define MCHP_INT15_BDP0 BIT(22)

/* GIRQ16 interrupt sources. Direct capable */
#define MCHP_INT16_PKE_DONE BIT(0)
#define MCHP_INT16_RNG_DONE BIT(2)
#define MCHP_INT16_AESH_DONE BIT(3)

/* GIR17 interrupt sources. Direct capable */
#define MCHP_INT17_PECI BIT(0)
#define MCHP_INT17_TACH_0 BIT(1)
#define MCHP_INT17_TACH_1 BIT(2)
#define MCHP_INT17_TACH_2 BIT(3)
#define MCHP_INT17_TACH_3 BIT(4)
#define MCHP_INT17_ADC_SINGLE BIT(8)
#define MCHP_INT17_ADC_REPEAT BIT(9)
#define MCHP_INT17_RCID_0 BIT(10)
#define MCHP_INT17_RCID_1 BIT(11)
#define MCHP_INT17_RCID_2 BIT(12)
#define MCHP_INT17_LED_WDT_0 BIT(13)
#define MCHP_INT17_LED_WDT_1 BIT(14)
#define MCHP_INT17_LED_WDT_2 BIT(15)
#define MCHP_INT17_LED_WDT_3 BIT(16)
#define MCHP_INT17_PROCHOT BIT(17)
#define MCHP_INT17_RPM2PWM0_FAIL BIT(20)
#define MCHP_INT17_RPM2PWM0_STALL BIT(21)
#define MCHP_INT17_RPM2PWM1_FAIL BIT(22)
#define MCHP_INT17_RPM2PWM1_STALL BIT(23)

/* GIRQ18 interrupt sources. Direct capable */
#define MCHP_INT18_SPIEP BIT(0)
#define MCHP_INT18_QMSPI BIT(1)
#define MCHP_INT18_GPSPI0_TXBE BIT(2)
#define MCHP_INT18_GPSPI0_RXBF BIT(3)
#define MCHP_INT18_GPSPI1_TXBE BIT(4)
#define MCHP_INT18_GPSPI1_RXBF BIT(5)
#define MCHP_INT18_BCM0_BUSY BIT(6)
#define MCHP_INT18_BCM0_ERR BIT(7)
#define MCHP_INT18_PS2_0 BIT(10)
#define MCHP_INT18_PSPI BIT(13)
#define MCHP_INT18_CCT BIT(20)
#define MCHP_INT18_CCT_CAP0 BIT(21)
#define MCHP_INT18_CCT_CAP1 BIT(22)
#define MCHP_INT18_CCT_CAP2 BIT(23)
#define MCHP_INT18_CCT_CAP3 BIT(24)
#define MCHP_INT18_CCT_CAP4 BIT(25)
#define MCHP_INT18_CCT_CAP6 BIT(26)
#define MCHP_INT18_CCT_CMP0 BIT(27)
#define MCHP_INT18_CCT_CMP1 BIT(28)

/* GIRQ19 interrupt sources. Direct capable */
#define MCHP_INT19_ESPI_PC BIT(0)
#define MCHP_INT19_ESPI_BM1 BIT(1)
#define MCHP_INT19_ESPI_BM2 BIT(2)
#define MCHP_INT19_ESPI_LTR BIT(3)
#define MCHP_INT19_ESPI_OOB_TX BIT(4)
#define MCHP_INT19_ESPI_OOB_RX BIT(5)
#define MCHP_INT19_ESPI_FC BIT(6)
#define MCHP_INT19_ESPI_RESET BIT(7)
#define MCHP_INT19_ESPI_VW_EN BIT(8)
#define MCHP_INT19_ESPI_SAF BIT(9)
#define MCHP_INT19_ESPI_SAF_ERR BIT(10)
#define MCHP_INT19_ESPI_SAF_CACHE BIT(11)

/* GIRQ20 interrupt sources. Direct capable */
#define MCHP_INT20_STAP_OBF BIT(0)
#define MCHP_INT20_STAP_IBF BIT(1)
#define MCHP_INT20_STAP_WAKE BIT(2)
#define MCHP_INT20_OTP BIT(3)
#define MCHP_INT20_ISPI BIT(8)
#define MCHP_INT20_CLK32K_MON BIT(9)

/* GIRQ21 interrupt sources. Direct capable */
#define MCHP_INT21_WDG BIT(2)
#define MCHP_INT21_WEEK_ALARM BIT(3)
#define MCHP_INT21_WEEK_SUB BIT(4)
#define MCHP_INT21_WEEK_1SEC BIT(5)
#define MCHP_INT21_WEEK_1SEC_SUB BIT(6)
#define MCHP_INT21_WEEK_PWR_PRES BIT(7)
#define MCHP_INT21_RTC BIT(8)
#define MCHP_INT21_RTC_ALARM BIT(9)
#define MCHP_INT21_VCI_OVRD BIT(10)
#define MCHP_INT21_VCI_IN0 BIT(11)
#define MCHP_INT21_VCI_IN1 BIT(12)
#define MCHP_INT21_VCI_IN2 BIT(13)
#define MCHP_INT21_VCI_IN3 BIT(14)
#define MCHP_INT21_VCI_IN4 BIT(15)
#define MCHP_INT21_PS2_0A_WAKE BIT(18)
#define MCHP_INT21_PS2_0B_WAKE BIT(19)
#define MCHP_INT21_KEYSCAN BIT(25)
#define MCHP_INT21_GLUE BIT(26)

/* GIRQ22 peripheral wake only. GIRQ22 not connected to NVIC */
#define MCHP_INT22_WAKE_ONLY_SPIEP BIT(0)
#define MCHP_INT22_WAKE_ONLY_I2C0 BIT(1)
#define MCHP_INT22_WAKE_ONLY_I2C1 BIT(2)
#define MCHP_INT22_WAKE_ONLY_I2C2 BIT(3)
#define MCHP_INT22_WAKE_ONLY_I2C3 BIT(4)
#define MCHP_INT22_WAKE_ONLY_I2C4 BIT(5)
#define MCHP_INT22_WAKE_ONLY_ESPI BIT(9)
#define MCHP_INT22_WAKE_ONLY_STAP BIT(15)

/* GIRQ23 sources. Direct capable */
#define MCHP_INT23_BTMR16_0 BIT(0)
#define MCHP_INT23_BTMR16_1 BIT(1)
#define MCHP_INT23_BTMR16_2 BIT(2)
#define MCHP_INT23_BTMR16_3 BIT(3)
#define MCHP_INT23_BTMR32_0 BIT(4)
#define MCHP_INT23_BTMR32_1 BIT(5)
#define MCHP_INT23_CNT16_0 BIT(6)
#define MCHP_INT23_CNT16_1 BIT(7)
#define MCHP_INT23_CNT16_2 BIT(8)
#define MCHP_INT23_CNT16_3 BIT(9)
#define MCHP_INT21_RTMR BIT(10)
#define MCHP_INT21_HTMR_0 BIT(16)
#define MCHP_INT21_HTMR_1 BIT(17)

/* GIRQ24 sources. Master-to-Slave v=[0:6], Source=[0:3] */
#define MCHP_INT24_MSVW_SRC(v, s) (1ul << ((4 * (v)) + (s)))

/* GIRQ25 sources Master-to-Slave v=[7:10], Source=[0:3] */
#define MCHP_INT25_MSVW_SRC(v, s) (1ul << ((4 * ((v)-7)) + (s)))

/* UART Peripheral 0 <= x <= 1 */
#define MCHP_UART_INSTANCES 2
#define MCHP_UART_SPACING 0x400
#define MCHP_UART_CFG_OFS 0x300
#define MCHP_UART_CONFIG_BASE(x) \
	(MCHP_UART0_BASE + MCHP_UART_CFG_OFS + ((x)*MCHP_UART_SPACING))
#define MCHP_UART_RUNTIME_BASE(x) (MCHP_UART0_BASE + ((x)*MCHP_UART_SPACING))
#define MCHP_UART_GIRQ 15
#define MCHP_UART0_GIRQ_BIT (MCHP_INT15_UART_0)
#define MCHP_UART1_GIRQ_BIT (MCHP_INT15_UART_1)
#define MCHP_UART_GIRQ_BIT(x) BIT(x)
/* Bit defines for MCHP_UARTx_LSR */
#define MCHP_LSR_TX_EMPTY BIT(5)

/*
 * GPIO
 * MCHP each Port contains 32 GPIO's.
 * GPIO Control 1 registers are 32-bit registers starting at
 * MCHP_GPIO_BASE.
 * index = octal GPIO number from MCHP specification.
 * port/bank = index >> 5
 * id = index & 0x1F
 *
 * The port/bank, id pair may also be used to access GPIO's via
 * parallel I/O registers if GPIO control is configured for
 * parallel I/O.
 *
 * From ec/chip/mec1701/config_chip.h
 * #define GPIO_PIN(index) ((index) >> 5), ((index) & 0x1F)
 *
 * GPIO Control 1 Address = 0x40081000 + (((bank << 5) + id) << 2)
 *
 * Example: GPIO043, Control 1 register address = 0x4008108c
 * port/bank = 0x23 >> 5 = 1
 * id        = 0x23 & 0x1F = 0x03
 * Control 1 Address = 0x40081000 + ((BIT(5) + 0x03) << 2) = 0x4008108c
 *
 * Example: GPIO235, Control 1 register address = 0x40081274
 * port/bank = 0x9d >> 5   = 4
 * id        = 0x9d & 0x1f = 0x1d
 * Control 1 Address = 0x40081000 + (((4 << 5) + 0x1d) << 2) = 0x40081274
 *
 */
#define MCHP_GPIO_CTL(port, id) \
	REG32(MCHP_GPIO_BASE + (((port << 5) + id) << 2))

/* MCHP implements 6 GPIO ports */
#define MCHP_GPIO_MAX_PORT 6
#define UNIMPLEMENTED_GPIO_BANK MCHP_GPIO_MAX_PORT
/*
 * In MECxxxx documentation GPIO numbers are octal, each control
 * register is located on a 32-bit boundary.
 */
#define MCHP_GPIO_CTRL(gpio_num) REG32(MCHP_GPIO_BASE + ((gpio_num) << 2))

/*
 * GPIO control register bit fields
 */
#define MCHP_GPIO_CTRL_PUD_BITPOS 0
#define MCHP_GPIO_CTRL_PUD_MASK0 0x03
#define MCHP_GPIO_CTRL_PUD_MASK 0x03
#define MCHP_GPIO_CTRL_PUD_NONE 0x00
#define MCHP_GPIO_CTRL_PUD_PU 0x01
#define MCHP_GPIO_CTRL_PUD_PD 0x02
#define MCHP_GPIO_CTRL_PUD_KEEPER 0x03
#define MCHP_GPIO_CTRL_PWR_BITPOS 2
#define MCHP_GPIO_CTRL_PWR_MASK0 0x03
#define MCHP_GPIO_CTRL_PWR_MASK GENMASK(2, 1)
#define MCHP_GPIO_CTRL_PWR_VTR 0
#define MCHP_GPIO_CTRL_PWR_OFF (0x02U << 2)
#define MCHP_GPIO_INTDET_MASK 0xF0U
#define MCHP_GPIO_INTDET_LVL_LO 0x00
#define MCHP_GPIO_INTDET_LVL_HI 0x10U
#define MCHP_GPIO_INTDET_DISABLED 0x40U
#define MCHP_GPIO_INTDET_EDGE_RIS 0xD0U
#define MCHP_GPIO_INTDET_EDGE_FALL 0xE0U
#define MCHP_GPIO_INTDET_EDGE_BOTH 0xF0U
#define MCHP_GPIO_INTDET_EDGE_EN BIT(7)
#define MCHP_GPIO_PUSH_PULL 0U
#define MCHP_GPIO_OPEN_DRAIN BIT(8)
#define MCHP_GPIO_INPUT 0U
#define MCHP_GPIO_OUTPUT BIT(9)
#define MCHP_GPIO_OUTSET_CTRL 0U
#define MCHP_GPIO_OUTSEL_PAR BIT(10)
#define MCHP_GPIO_POLARITY_NINV 0U
#define MCHP_GPIO_POLARITY_INV BIT(11)
#define MCHP_GPIO_CTRL_ALT_FUNC_BITPOS 12
#define MCHP_GPIO_CTRL_ALT_FUNC_MASK0 0x07U
#define MCHP_GPIO_CTRL_ALT_FUNC_MASK (0x07U << 12)
#define MCHP_GPIO_CTRL_FUNC_GPIO 0
#define MCHP_GPIO_CTRL_FUNC_1 (1U << 12)
#define MCHP_GPIO_CTRL_FUNC_2 (2U << 12)
#define MCHP_GPIO_CTRL_FUNC_3 (3U << 12)
#define MCHP_GPIO_CTRL_FUNC_4 (4U << 12)
#define MCHP_GPIO_CTRL_FUNC_5 (5U << 12)
#define MCHP_GPIO_CTRL_OUT_LVL BIT(16)
/* MEC172x implements input pad disable */
#define MCHP_GPIO_CTRL_DIS_INPUT_BITPOS 15
#define MCHP_GPIO_CTRL_DIS_INPUT_BIT BIT(15)

/*
 * GPIO Parallel Input and Output registers.
 * gpio_bank in [0, 5]
 */
#define MCHP_GPIO_PARIN(bank) REG32(MCHP_GPIO_BASE + 0x0300 + ((bank) << 2))
#define MCHP_GPIO_PAROUT(bank) REG32(MCHP_GPIO_BASE + 0x0380 + ((bank) << 2))

/* Basic timers */
#define MCHP_TMR_SPACING 0x20
#define MCHP_TMR16_INSTANCES 4
#define MCHP_TMR32_INSTANCES 2
#define MCHP_TMR16_MAX (MCHP_TMR16_INSTANCES)
#define MCHP_TMR32_MAX (MCHP_TMR32_INSTANCES)
#define MCHP_TMR16_BASE(n) (MCHP_TMR16_0_BASE + (n)*MCHP_TMR_SPACING)
#define MCHP_TMR32_BASE(n) (MCHP_TMR32_0_BASE + (n)*MCHP_TMR_SPACING)
#define MCHP_TMR16_GIRQ 23
#define MCHP_TMR16_GIRQ_BIT(n) BIT(0 + (n))
#define MCHP_TMR32_GIRQ 23
#define MCHP_TMR32_GIRQ_BIT(n) BIT(4 + (n))

/* 16-bit Counter/timer */
#define MCHP_CNT16_SPACING 0x20
#define MCHP_CNT16_INSTANCES 4
#define MCHP_CNT16_BASE(n) (MCHP_CNT16_0_BASE + (n)*MCHP_CNT16_SPACING)
#define MCHP_CNT16_GIRQ 23
#define MCHP_CNT16_GIRQ_BIT(x) BIT(6 + (x))

/* RTimer */
#define MCHP_RTMR_GIRQ 21
#define MCHP_RTMR_GIRQ_BIT(x) MCHP_INT21_RTMR

/* Watchdog */
/* MEC152x specific registers */
#define MCHP_WDG_STATUS REG32(MCHP_WDG_BASE + 0x10)
#define MCHP_WDG_IEN REG32(MCHP_WDG_BASE + 0x14)
/* Status */
#define MCHP_WDG_STS_IRQ BIT(0)
/* Interrupt enable */
#define MCHP_WDG_IEN_IRQ_EN BIT(0)
#define MCHP_WDG_GIRQ 21
#define MCHP_WDG_GIRQ_BIT BIT(2)
/* Control register has a bit to enable IRQ generation */
#define MCHP_WDG_RESET_IRQ_EN BIT(9)

/* VBAT */
#define MCHP_VBAT_STS REG32(MCHP_VBAT_BASE + 0x0)
#define MCHP_VBAT_CSS REG32(MCHP_VBAT_BASE + 0x8)
#define MCHP_VBAT_MONOTONIC_CTR_LO REG32(MCHP_VBAT_BASE + 0x20)
#define MCHP_VBAT_MONOTONIC_CTR_HI REG32(MCHP_VBAT_BASE + 0x24)
#define MCHP_VBAT_ROM_FEAT REG32(MCHP_VBAT_BASE + 0x28)
#define MCHP_VBAT_EMB_DEBOUNCE_EN REG32(MCHP_VBAT_BASE + 0x34)
/* read 32-bit word at 32-bit offset x where 0 <= x <= 32 */
#define MCHP_VBAT_RAM_SIZE 128
#define MCHP_VBAT_RAM(wnum) REG32(MCHP_VBAT_RAM_BASE + ((wnum)*4))
#define MCHP_VBAT_RAM8(bnum) REG8(MCHP_VBAT_RAM_BASE + (bnum))
#define MCHP_VBAT_VWIRE_BACKUP 30
/*
 * Miscellaneous firmware control fields
 * scratch pad index cannot be more than 32 as
 * MEC152x has 64 bytes = 16 words of scratch RAM
 */
#define MCHP_IMAGETYPE_IDX 31

/* Bit definition for MCHP_VBAT_STS */
#define MCHP_VBAT_STS_SOFTRESET BIT(2)
#define MCHP_VBAT_STS_RESETI BIT(4)
#define MCHP_VBAT_STS_WDT BIT(5)
#define MCHP_VBAT_STS_SYSRESETREQ BIT(6)
#define MCHP_VBAT_STS_VBAT_RST BIT(7)
#define MCHP_VBAT_STS_ANY_RST 0xF4u

/* Bit definitions for MCHP_VBAT_CSS */
#define MCHP_VBAT_CSS_SIL32K_EN BIT(0)
#define MCHP_VBAT_CSS_XTAL_EN BIT(8)
#define MCHP_VBAT_CSS_XTAL_SINGLE BIT(9)
#define MCHP_VBAT_CSS_XTAL_HSC_DIS BIT(10)
#define MCHP_VBAT_CSS_XTAL_CNT_POS 11
#define MCHP_VBAT_CSS_XTAL_CNT_MASK (0x03U << 11)
#define MCHP_VBAT_CSS_SRC_POS 16
#define MCHP_VBAT_CSS_SRC_MASK (0x03U << 16)
#define MCHP_VBAT_CSS_SRC_SIL_OSC 0
#define MCHP_VBAT_CSS_SRC_XTAL (1U << 16)
/* Switch from 32KHZ_IN input to silicon OSC when VTR goes down */
#define MCHP_VBAT_CSS_SRC_SWPS (2U << 16)
/* Switch from 32KHZ_IN input to XTAL on VBAT when VTR goes down */
#define MCHP_VBAT_CSS_SRC_SWPX (3U << 16)
/* Disable 32Khz silicon oscillator when VBAT goes off */
#define MCHP_VBAT_CSS_NVB_SUPS BIT(18)

/* Blinking-Breathing LED 0 <= n <= 2 */
#define MCHP_BBLEB_INSTANCES 4
#define MCHP_BBLED_BASE(n) (MCHP_BBLED_0_BASE + (((n)&0x03) * 256))

/* EMI */
#define MCHP_EMI_INSTANCES 3
#define MCHP_EMI_SPACING 0x400
#define MCHP_EMI_ECREG_OFS 0x100
/* base of EMI registers only accessible by EC */
#define MCHP_EMI_BASE(n) \
	(MCHP_EMI_0_BASE + MCHP_EMI_ECREG_OFS + ((n)*MCHP_EMI_SPACING))
/* base of EMI registers accessible by EC and Host */
#define MCHP_EMI_RT_BASE(n) (MCHP_EMI_0_BASE + ((n)*MCHP_EMI_SPACING))
#define MCHP_EMI_GIRQ 15
#define MCHP_EMI_GIRQ_BIT(n) BIT(2 + (n))

/* Mailbox */
#define MCHP_MBX_ECREGS_OFS 0x100
#define MCHP_MBX_RT_BASE MCHP_MBOX_BASE
#define MCHP_MBX_BASE (MCHP_MBOX_BASE + MCHP_MBX_ECREGS_OFS)
#define MCHP_MBX_GIRQ 15
#define MCHP_MBX_GIRQ_BIT BIT(20)

/* MEC172x includes one instance of the BIOS Debug Port
 * capable of capturing Host I/O port 0x80 and 0x90 writes.
 * EC Data Value register:
 * bits[7:0] oldest FIFO data from Host
 * bits[15:16] data attributes/status
 * Read with 16 or 32 access guarantees attributes/status bits
 * correspond to data in bits[7:0].
 */
#define MCHP_BDP0_HDATA REG32(MCHP_BDP0_BASE)
#define MCHP_BDP0_DATTR REG16(MCHP_BDP0_BASE + 0x100)
#define MCHP_BDP0_CONFIG REG32(MCHP_BDP0_BASE + 0x104)
#define MCHP_BDP0_STATUS REG8(MCHP_BDP0_BASE + 0x108)
#define MCHP_BDP0_INTR_EN REG8(MCHP_BDP0_BASE + 0x109)
#define MCHP_BDP0_STS_IEN REG16(MCHP_BDP0_BASE + 0x108)
#define MCHP_BDP0_SNAPSHOT REG32(MCHP_BDP0_BASE + 0x10C)
#define MCHP_BDP0_CAPTURE REG32(MCHP_BDP0_BASE + 0x110)
#define MCHP_BDP0_ACTV REG8(MCHP_BDP0_BASE + 0x330)
#define MCHP_BDP0_ALIAS_HDATA REG8(MCHP_BDP0_BASE + 0x400)
#define MCHP_BDP0_ALIAS_ACTV REG8(MCHP_BDP0_BASE + 0x730)
#define MCHP_BDP0_ALIAS_BLN REG8(MCHP_BDP0_BASE + 0x7F0)

#define MCHP_BDP0_GIRQ 15
#define MCHP_BDP0_GIRQ_BIT BIT(22)

/* BDP DATATR as 16-bit value bit definitions */
#define MCHP_BDP_DATTR_POS 0
#define MCHP_BDP_DATTR_DATA_MASK 0xff
#define MCHP_BDP_DATTR_LANE_POS 8
#define MCHP_BDP_DATTR_LANE_MASK GENMASK(9, 8)
#define MCHP_BDP_DATTR_LANE_0 0
#define MCHP_BDP_DATTR_LANE_1 (1U << 8)
#define MCHP_BDP_DATTR_LANE_2 (2U << 8)
#define MCHP_BDP_DATTR_LANE_3 (3U << 8)
#define MCHP_BDP_DATTR_LEN_POS 10
#define MCHP_BDP_DATTR_LEN_MASK GENMASK(11, 10)
#define MCHP_BDP_DATTR_LEN_1 0
#define MCHP_BDP_DATTR_LEN_2 (1U << 10)
#define MCHP_BDP_DATTR_LEN_4 (2U << 10)
#define MCHP_BDP_DATTR_LEN_INVAL (3U << 10)
#define MCHP_BDP_DATTR_NE BIT(12)
#define MCHP_BDP_DATTR_OVR BIT(13)
#define MCHP_BDP_DATTR_THRH BIT(14)

/* BDP Configuration */
#define MCHP_BDP_CFG_FLUSH_FIFO BIT(0)
#define MCHP_BDP_CFG_SNAPSHOT_CLR BIT(1)
#define MCHP_BDP_CFG_FIFO_THRH_POS 8
#define MCHP_BDP_CFG_FIFO_THRH_1 0
#define MCHP_BDP_CFG_FIFO_THRH_4 (1U << 8)
#define MCHP_BDP_CFG_FIFO_THRH_8 (2U << 8)
#define MCHP_BDP_CFG_FIFO_THRH_16 (3U << 8)
#define MCHP_BDP_CFG_FIFO_THRH_20 (4U << 8)
#define MCHP_BDP_CFG_FIFO_THRH_24 (5U << 8)
#define MCHP_BDP_CFG_FIFO_THRH_28 (6U << 8)
#define MCHP_BDP_CFG_FIFO_THRH_30 (7U << 8)
#define MCHP_BDP_CFG_SRST BIT(31)

/* BDP Status */
#define MCHP_BDP_STATUS_MASK GENMASK(2, 0)
#define MCHP_BDP_STATUS_NOT_EMPTY BIT(0)
#define MCHP_BDP_STATUS_OVERRUN BIT(1)
#define MCHP_BDP_STATUS_THRH BIT(2)

/* BDP Interrupt enable */
#define MCHP_BDP_IEN_THRH BIT(0)

/* PWM SZ 144 pin package has 9 PWM's */
#define MCHP_PWM_INSTANCES 9
#define MCHP_PWM_ID_MAX (MCHP_PWM_INSTANCES)
#define MCHP_PWM_SPACING 16
#define MCHP_PWM_BASE(x) (MCHP_PWM_0_BASE + ((x)*MCHP_PWM_SPACING))

/* TACH */
#define MCHP_TACH_INSTANCES 4
#define MCHP_TACH_SPACING 16
#define MCHP_TACH_BASE(x) (MCHP_TACH_0_BASE + ((x)*MCHP_TACH_SPACING))
#define MCHP_TACH_GIRQ 17
#define MCHP_TACH_GIRQ_BIT(x) BIT(1 + (x))

/* FAN */
#define MCHP_FAN_INSTANCES 2
#define MCHP_FAN_SPACING 0x80U
#define MCHP_FAN_BASE(x) (MCHP_RPM2PWM0_BASE + ((x)*MCHP_FAN_SPACING))
#define MCHP_FAN_SETTING(x) REG16(MCHP_FAN_BASE(x) + 0x0)
#define MCHP_FAN_CFG1(x) REG8(MCHP_FAN_BASE(x) + 0x2)
#define MCHP_FAN_CFG2(x) REG8(MCHP_FAN_BASE(x) + 0x3)
#define MCHP_FAN_PWM_DIVIDE(x) REG8(MCHP_FAN_BASE(x) + 0x4)
#define MCHP_FAN_GAIN(x) REG8(MCHP_FAN_BASE(x) + 0x5)
#define MCHP_FAN_SPIN_UP(x) REG8(MCHP_FAN_BASE(x) + 0x6)
#define MCHP_FAN_STEP(x) REG8(MCHP_FAN_BASE(x) + 0x7)
#define MCHP_FAN_MIN_DRV(x) REG8(MCHP_FAN_BASE(x) + 0x8)
#define MCHP_FAN_VALID_CNT(x) REG8(MCHP_FAN_BASE(x) + 0x9)
#define MCHP_FAN_DRV_FAIL(x) REG16(MCHP_FAN_BASE(x) + 0xa)
#define MCHP_FAN_TARGET(x) REG16(MCHP_FAN_BASE(x) + 0xc)
#define MCHP_FAN_READING(x) REG16(MCHP_FAN_BASE(x) + 0xe)
#define MCHP_FAN_BASE_FREQ(x) REG8(MCHP_FAN_BASE(x) + 0x10)
#define MCHP_FAN_STATUS(x) REG8(MCHP_FAN_BASE(x) + 0x11)

/* ACPI EC */
#define MCHP_ACPI_EC_INSTANCES 5
#define MCHP_ACPI_EC_MAX (MCHP_ACPI_EC_INSTANCES)
#define MCHP_ACPI_EC_SPACING 0x400
#define MCHP_ACPI_EC_BASE(x) (MCHP_ACPI_EC_0_BASE + ((x)*MCHP_ACPI_EC_SPACING))
#define MCHP_ACPI_EC_GIRQ 15
#define MCHP_ACPI_EC_IBF_GIRQ_BIT(x) BIT(5 + ((x)*2))
#define MCHP_ACPI_EC_OBE_GIRQ_BIT(x) BIT(6 + ((x)*2))

/* ACPI PM1 */
#define MCHP_ACPI_PM1_ECREGS_OFS 0x100
#define MCHP_ACPI_PM_RT_BASE MCHP_ACPI_PM1_BASE
#define MCHP_ACPI_PM_EC_BASE (MCHP_ACPI_PM1_BASE + MCHP_ACPI_PM1_ECREGS_OFS)
#define MCHP_ACPI_PM1_CTL_GIRQ_BIT BIT(15)
#define MCHP_ACPI_PM1_EN_GIRQ_BIT BIT(16)
#define MCHP_ACPI_PM1_STS_GIRQ_BIT BIT(17)

/* 8042 */
#define MCHP_8042_ECREGS_OFS 0x100
#define MCHP_8042_GIRQ 15
#define MCHP_8042_OBE_GIRQ_BIT BIT(18)
#define MCHP_8042_IBF_GIRQ_BIT BIT(19)

/* I2C controllers 0 - 4 include SMBus network layer functionality. */
#define MCHP_I2C_CTRL0 0
#define MCHP_I2C_CTRL1 1
#define MCHP_I2C_CTRL2 2
#define MCHP_I2C_CTRL3 3
#define MCHP_I2C_CTRL4 4
#define MCHP_I2C_CTRL_MAX 5

#define MCHP_I2C_SEP0 0x400

/*
 * MEC172x SZ(144-pin) package implements 15 ports. No Port 11.
 * LJ(176-pin) package implements 16 ports.
 * Any port can be mapped to any I2C controller.
 * I2C port values must be zero based consecutive whole numbers due to
 * port number used as an index for I2C the mutex list, etc.
 * Refer to chip i2c_port_to_controller function for mapping
 * of port to controller.
 * Locking must occur by-controller (not by-port).
 */
#if (defined(CHIP_VARIANT_MEC1721LJ) || defined(CHIP_VARIANT_MEC1723LJ) || \
     defined(CHIP_VARIANT_MEC1727LJ))
#define MCHP_I2C_PORT_MASK GENMASK(15, 0)
#else
#define MCHP_I2C_PORT_MASK (GENMASK(15, 0) & ~BIT(11))
#endif
enum MCHP_i2c_port {
	MCHP_I2C_PORT0 = 0,
	MCHP_I2C_PORT1,
	MCHP_I2C_PORT2,
	MCHP_I2C_PORT3,
	MCHP_I2C_PORT4,
	MCHP_I2C_PORT5,
	MCHP_I2C_PORT6,
	MCHP_I2C_PORT7,
	MCHP_I2C_PORT8,
	MCHP_I2C_PORT9,
	MCHP_I2C_PORT10,
	MCHP_I2C_PORT11,
	MCHP_I2C_PORT12,
	MCHP_I2C_PORT13,
	MCHP_I2C_PORT14,
	MCHP_I2C_PORT15,
	MCHP_I2C_PORT_COUNT,
};

/* I2C ports & Configs */
#define I2C_CONTROLLER_COUNT MCHP_I2C_CTRL_MAX
#define I2C_PORT_COUNT MCHP_I2C_PORT_COUNT

/* All I2C controllers connected to GIRQ13 */
#define MCHP_I2C_GIRQ 13
/* I2C[0:7] -> GIRQ13 bits[0:7] */
#define MCHP_I2C_GIRQ_BIT(n) BIT((n))

/* Keyboard scan matrix */
#define MCHP_KS_GIRQ 21
#define MCHP_KS_GIRQ_BIT BIT(25)
#define MCHP_KS_DIRECT_NVIC 135

/* ADC */
#if (defined(CHIP_VARIANT_MEC1721LJ) || defined(CHIP_VARIANT_MEC1723LJ) || \
     defined(CHIP_VARIANT_MEC1727LJ))
#define MCHP_ADC_CHAN_MASK GENMASK(15, 0)
#else
#define MCHP_ADC_CHAN_MASK GENMASK(7, 0)
#endif
#define MCHP_ADC_GIRQ 17
#define MCHP_ADC_GIRQ_SINGLE_BIT BIT(8)
#define MCHP_ADC_GIRQ_REPEAT_BIT BIT(9)
#define MCHP_ADC_SINGLE_DIRECT_NVIC 78
#define MCHP_ADC_REPEAT_DIRECT_NVIC 79
#define MCHP_ADC_CONFIG REG32(MCHP_ADC_BASE + 0x7c)
#define MCHP_ADC_CONFIG_DFLT 0x0101U
#define MCHP_ADC_CFG_CLK_LO_TM_MSK GENMASK(7, 0)
#define MCHP_ADC_CFG_CLK_HI_TM_MSK GENMASK(15, 8)
#define MCHP_ADC_VREF_CSEL REG32(MCHP_ADC_BASE + 0x80)
#define MCHP_ADC_VREF_CSEL_MSK(ch) (0x03U << ((ch)*2U))
#define MCHP_ADC_VREF_CSEL_GPIO(ch) BIT((ch)*2U)
#define MCHP_ADC_VREF_CTRL REG32(MCHP_ADC_BASE + 0x84)
#define MCHP_ADC_VREF_CTRL_DFLT 0U
#define MCHP_ADC_VCTRL_CHRG_DLY_MSK GENMASK(15, 0)
#define MCHP_ADC_VCTRL_SW_DLY_MSK GENMASK(28, 16)
#define MCHP_ADC_VCTRL_DRV_UNUSED_LO BIT(29)
#define MCHP_ADC_VCTRL_SEL_STS_RO_POS 30
#define MCHP_ADC_VCTRL_SEL_STS_RO_MSK GENMASK(31, 30)
#define MCHP_ADC_SAR_ADC_CTRL REG32(MCHP_ADC_BASE + 0x88)
#define MCHP_ADC_SAR_ADC_CTRL_DFLT ((0x202U << 7) | (0x03U << 1))
#define MCHP_ADC_SAC_DIFF_INPUT BIT(0)
#define MCHP_ADC_SAC_RES_POS 1
#define MCHP_ADC_SAC_RES_MSK GENMASK(2, 1)
#define MCHP_ADC_SAC_RES_10BIT (2U << 1)
#define MCHP_ADC_SAC_RES_12BIT (3U << 1)
#define MCHP_ADC_SAC_RJ_10BIT BIT(3)
#define MCHP_ADC_SAC_WU_DLY_POS 7
#define MCHP_ADC_SAC_WU_DLY_MSK GENMASK(16, 7)
#define MCHP_ADC_SAC_WU_DLY_DLFT (0x202U << 7)

/* Hibernation timer */
#define MCHP_HTIMER_SPACING 0x20
#define MCHP_HTIMER_ADDR(n) (MCHP_HTIMER_BASE + ((n)*MCHP_HTIMER_SPACING))
#define MCHP_HTIMER_GIRQ 21
/* HTIMER[0:1] -> GIRQ21 bits[1:2] */
#define MCHP_HTIMER_GIRQ_BIT(n) BIT(1 + (n))
#define MCHP_HTIMER_DIRECT_NVIC(n) (112 + (n))

/* General Purpose SPI (GP-SPI) */
#define MCHP_SPI_BASE(port) (MCHP_GPSPI0_BASE + ((port)*0x80))
#define MCHP_SPI_AR(port) REG8(MCHP_SPI_BASE(port) + 0x00)
#define MCHP_SPI_CR(port) REG8(MCHP_SPI_BASE(port) + 0x04)
#define MCHP_SPI_SR(port) REG8(MCHP_SPI_BASE(port) + 0x08)
#define MCHP_SPI_TD(port) REG8(MCHP_SPI_BASE(port) + 0x0c)
#define MCHP_SPI_RD(port) REG8(MCHP_SPI_BASE(port) + 0x10)
#define MCHP_SPI_CC(port) REG8(MCHP_SPI_BASE(port) + 0x14)
#define MCHP_SPI_CG(port) REG8(MCHP_SPI_BASE(port) + 0x18)
/* Addresses of TX/RX register used in tables */
#define MCHP_SPI_TD_ADDR(ctrl) (MCHP_SPI_BASE(ctrl) + 0x0c)
#define MCHP_SPI_RD_ADDR(ctrl) (MCHP_SPI_BASE(ctrl) + 0x10)
/* All GP-SPI controllers connected to GIRQ18 */
#define MCHP_SPI_GIRQ 18
#define MCHP_SPI_GIRQ_TXBE_BIT(x) BIT(2 + ((x)*2))
#define MCHP_SPI_GIRQ_RXBF_BIT(x) BIT(3 + ((x)*2))
#define MCHP_GPSPI0_ID 0
#define MCHP_GPSPI1_ID 1

/*
 * Quad Master SPI (QMSPI)
 * MEC172x implements 16 descriptors, support for two chip selects,
 * chip select timing and a local DMA unit with 3 RX channels and
 * 3 TX channels. It retains support of the legacy DMA block.
 */
#define MCHP_QMSPI_MAX_DESCR 16
#define MCHP_QMSPI_GIRQ 18
#define MCHP_QMSPI_GIRQ_BIT BIT(1)
#define MCHP_QMSPI_DIRECT_NVIC 91
/* SAF DMA mode when QMSPI when eSPI SAF is enabled */
#define MCHP_QMSPI_M_SAF_EN BIT(2)
/* Local DMA enables in Mode register */
#define MCHP_QMSPI_M_LDRX_EN BIT(3)
#define MCHP_QMSPI_M_LDTX_EN BIT(4)
/* Chip select implemented in bit[13:12] of the Mode register. */
#define MCHP_QMSPI_M_CS_POS 12
#define MCHP_QMSPI_M_CS_MASK0 0x03
#define MCHP_QMSPI_M_CS_MASK GENMASK(13, 12)
#define MCHP_QMSPI_M_CS0 0U
#define MCHP_QMSPI_M_CS1 BIT(12)
/* QMSPI alternate clock divider when CS1 is active. */
#define MCHP_QMSPI0_ALTM REG32(MCHP_QMSPI0_BASE + 0xc0)
#define MCHP_QMSPI0_ALTM_EN BIT(0)
/* QMSPI taps select */
#define MCHP_QMSPI0_TAPS REG32(MCHP_QMSPI0_BASE + 0xd0)
/* QMSPI Taps adjust */
#define MCHP_QMSPI0_TAPS_ADJ REG32(MCHP_QMSPI0_BASE + 0xd4)
#define MCHP_QMSPI0_TAPS_SCK_POS 0
#define MCHP_QMSPI0_TAPS_SCK_MSK GENMASK(7, 0)
#define MCHP_QMSPI0_TAPS_CTL_POS 8
#define MCHP_QMSPI0_TAPS_CTL_MSK GENMASK(15, 8)
/* QMSPI Taps control */
#define MCHP_QMSPI0_TAPS_CTRL REG32(MCHP_QMSPI0_BASE + 0xd4)
#define MCHP_QMSPI0_TAPS_CTRL_MODE_POS 0
#define MCHP_QMSPI0_TAPS_CTRL_MODE_MSK GENMASK(1, 0)
#define MCHP_QMSPI0_TAPS_CTRL_UPDATE BIT(2)
#define MCHP_QMSPI0_TAPS_CTRL_GO BIT(8)
#define MCHP_QMSPI0_TAPS_CTRL_MULT_POS 16
#define MCHP_QMSPI0_TAPS_CTRL_MULT_MSK GENMASK(18, 16)
/* QMSPI LDMA descriptor enables */
#define MCHP_QMSPI0_LDRX_DEN REG32(MCHP_QMSPI0_BASE + 0x100)
#define MCHP_QMSPI0_LDTX_DEN REG32(MCHP_QMSPI0_BASE + 0x104)
/*
 * QMSPI LDMA channel registers.
 * Each channel implement 3 32-bit registers:
 * control, memory base address, and transfer length.
 */
#define MCHP_QMSPI0_LDRX_CHANS 3U
#define MCHP_QMSPI0_LDTX_CHANS 3U
#define MCHP_QMSPI0_LDRX_CTRL(n) REG32(MCHP_QMSPI0_BASE + 0x110 + ((n)*16U))
#define MCHP_QMSPI0_LDRX_MBASE(n) REG32(MCHP_QMSPI0_BASE + 0x114 + ((n)*16U))
#define MCHP_QMSPI0_LDRX_LEN(n) REG32(MCHP_QMSPI0_BASE + 0x118 + ((n)*16U))
#define MCHP_QMSPI0_LDTX_CTRL(n) REG32(MCHP_QMSPI0_BASE + 0x140 + ((n)*16U))
#define MCHP_QMSPI0_LDTX_MBASE(n) REG32(MCHP_QMSPI0_BASE + 0x144 + ((n)*16U))
#define MCHP_QMSPI0_LDTX_LEN(n) REG32(MCHP_QMSPI0_BASE + 0x148 + ((n)*16U))
/* LDMA RX or TX channel control register */
#define MCHP_QMSPI_LDC_MSK GENMASK(6, 0)
#define MCHP_QMSPI_LDC_EN BIT(0)
#define MCHP_QMSPI_LDC_RSTART_EN BIT(1)
#define MCHP_QMSPI_LDC_RSTART_MA_EN BIT(2)
#define MCHP_QMSPI_LDC_LEN_EN BIT(3)
#define MCHP_QMSPI_LDC_ACC_SZ_POS 4
#define MCHP_QMSPI_LDC_ACC_SZ_MSK GENMASK(5, 4)
#define MCHP_QMSPI_LDC_ACC_1BYTE 0
#define MCHP_QMSPI_LDC_ACC_2BYTES (1U << 4)
#define MCHP_QMSPI_LDC_ACC_4BYTES (2U << 4)
#define MCHP_QMSPI_LDC_INCR_ADDR BIT(6)

/* eSPI */
/* IO BAR defines. Use with MCHP_ESPI_IO_BAR_xxxx macros */
#define MCHP_ESPI_IO_BAR_ID_CFG_PORT 0
#define MCHP_ESPI_IO_BAR_ID_MEM_CMPNT 1
#define MCHP_ESPI_IO_BAR_ID_MAILBOX 2
#define MCHP_ESPI_IO_BAR_ID_8042 3
#define MCHP_ESPI_IO_BAR_ID_ACPI_EC0 4
#define MCHP_ESPI_IO_BAR_ID_ACPI_EC1 5
#define MCHP_ESPI_IO_BAR_ID_ACPI_EC2 6
#define MCHP_ESPI_IO_BAR_ID_ACPI_EC3 7
#define MCHP_ESPI_IO_BAR_ID_ACPI_EC4 8
#define MCHP_ESPI_IO_BAR_ID_ACPI_PM1 9
#define MCHP_ESPI_IO_BAR_ID_P92 0xA
#define MCHP_ESPI_IO_BAR_ID_UART0 0xB
#define MCHP_ESPI_IO_BAR_ID_UART1 0xC
#define MCHP_ESPI_IO_BAR_ID_EMI0 0xD
#define MCHP_ESPI_IO_BAR_ID_EMI1 0xE
#define MCHP_ESPI_IO_BAR_ID_EMI2 0xF
#define MCHP_ESPI_IO_BAR_BDP0 0x10
#define MCHP_ESPI_IO_BAR_BDP0_ALT 0x11
#define MCHP_ESPI_IO_BAR_RTC 0x12
#define MCHP_ESPI_IO_BAR_TB32 0x14
#define MCHP_ESPI_IO_BAR_GLUE 0x16

/* Use with MCHP_ESPI_MBAR_EC_xxxx(x) macros */
#define MCHP_ESPI_MBAR_ID_MBOX 0
#define MCHP_ESPI_MBAR_ID_ACPI_EC_0 1
#define MCHP_ESPI_MBAR_ID_ACPI_EC_1 2
#define MCHP_ESPI_MBAR_ID_ACPI_EC_2 3
#define MCHP_ESPI_MBAR_ID_ACPI_EC_3 4
#define MCHP_ESPI_MBAR_ID_ACPI_EC_4 5
#define MCHP_ESPI_MBAR_ID_EMI_0 6
#define MCHP_ESPI_MBAR_ID_EMI_1 7
#define MCHP_ESPI_MBAR_ID_EMI_2 8
#define MCHP_ESPI_MBAR_ID_TB32 9

/* Use with MCHP_ESPI_IO_SERIRQ_REG(x) */
#define MCHP_ESPI_SIRQ_MBOX 0 /* Host SIRQ */
#define MCHP_ESPI_SIRQ_MBOX_SMI 1 /* Host SMI */
#define MCHP_ESPI_SIRQ_8042_KB 2 /* KIRQ */
#define MCHP_ESPI_SIRQ_8042_MS 3 /* MIRQ */
#define MCHP_ESPI_SIRQ_ACPI_EC0_OBF 4
#define MCHP_ESPI_SIRQ_ACPI_EC1_OBF 5
#define MCHP_ESPI_SIRQ_ACPI_EC2_OBF 6
#define MCHP_ESPI_SIRQ_ACPI_EC3_OBF 7
#define MCHP_ESPI_SIRQ_ACPI_EC4_OBF 8
#define MCHP_ESPI_SIRQ_UART0 9
#define MCHP_ESPI_SIRQ_UART1 10
#define MCHP_ESPI_SIRQ_EMI0_HEV 11 /* Host Event */
#define MCHP_ESPI_SIRQ_EMI0_EC2H 12 /* EC to Host */
#define MCHP_ESPI_SIRQ_EMI1_HEV 13
#define MCHP_ESPI_SIRQ_EMI1_EC2H 14
#define MCHP_ESPI_SIRQ_EMI2_HEV 15
#define MCHP_ESPI_SIRQ_EMI2_EC2H 16
#define MCHP_ESPI_SIRQ_RTC 17
#define MCHP_ESPI_SIRQ_EC 18

#define MCHP_ESPI_MSVW_BASE (MCHP_ESPI_VW_BASE)
#define MCHP_ESPI_SMVW_BASE ((MCHP_ESPI_VW_BASE) + 0x200ul)

/*
 * eSPI RESET, channel enables and operations except Master-to-Slave
 * WWires are all on GIRQ19
 */
#define MCHP_ESPI_GIRQ 19
#define MCHP_ESPI_PC_GIRQ_BIT BIT(0)
#define MCHP_ESPI_BM1_GIRQ_BIT BIT(1)
#define MCHP_ESPI_BM2_GIRQ_BIT BIT(2)
#define MCHP_ESPI_LTR_GIRQ_BIT BIT(3)
#define MCHP_ESPI_OOB_TX_GIRQ_BIT BIT(4)
#define MCHP_ESPI_OOB_RX_GIRQ_BIT BIT(5)
#define MCHP_ESPI_FC_GIRQ_BIT BIT(6)
#define MCHP_ESPI_RESET_GIRQ_BIT BIT(7)
#define MCHP_ESPI_VW_EN_GIRQ_BIT BIT(8)
#define MCHP_ESPI_SAF_DONE_GIRQ_BIT BIT(9)
#define MCHP_ESPI_SAF_ERR_GIRQ_BIT BIT(10)
#define MCHP_ESPI_SAF_CACHE_GIRQ_BIT BIT(11)

/* eSPI Master-to-Slave WWire interrupts are on GIRQ24 and GIRQ25 */
#define MCHP_ESPI_MSVW_0_6_GIRQ 24
#define MCHP_ESPI_MSVW_7_10_GIRQ 25
/*
 * Four source bits, SRC[0:3] per Master-to-Slave register
 * v = MSVW [0:10]
 * n = VWire SRC bit = [0:3]
 */
#define MCHP_ESPI_MSVW_GIRQ(v) (24 + ((v) > 6 ? 1 : 0))

#define MCHP_ESPI_MSVW_SRC_GIRQ_BIT(v, n) \
	(((v) > 6) ? (1ul << (((v)-7) + (n))) : (1ul << ((v) + (n))))

/* DMA */
#define MCHP_DMA_MAX_CHAN 16
#define MCHP_DMA_CH_OFS 0x40
#define MCHP_DMA_CH_OFS_BITPOS 6
#define MCHP_DMA_CH_BASE (MCHP_DMA_BASE + MCHP_DMA_CH_OFS)

/*
 * Available DMA channels.
 *
 * On MCHP, any DMA channel may serve any device. Since we have
 * 14 channels and 14 device request signals, we make each channel
 * dedicated to the device of the same number.
 */
enum dma_channel {
	/* Channel numbers */
	MCHP_DMAC_I2C0_SLAVE = 0,
	MCHP_DMAC_I2C0_MASTER,
	MCHP_DMAC_I2C1_SLAVE,
	MCHP_DMAC_I2C1_MASTER,
	MCHP_DMAC_I2C2_SLAVE,
	MCHP_DMAC_I2C2_MASTER,
	MCHP_DMAC_I2C3_SLAVE,
	MCHP_DMAC_I2C3_MASTER,
	MCHP_DMAC_I2C4_SLAVE,
	MCHP_DMAC_I2C5_MASTER,
	MCHP_DMAC_QMSPI0_TX,
	MCHP_DMAC_QMSPI0_RX,
	MCHP_DMAC_SPI0_TX,
	MCHP_DMAC_SPI0_RX,
	MCHP_DMAC_SPI1_TX,
	MCHP_DMAC_SPI1_RX,
	/* Channel count */
	MCHP_DMAC_COUNT,
};

/*
 * Peripheral device DMA Device ID's for bits [15:9]
 * in DMA channel control register.
 */
#define MCHP_DMA_I2C0_SLV_REQ_ID 0
#define MCHP_DMA_I2C0_MTR_REQ_ID 1
#define MCHP_DMA_I2C1_SLV_REQ_ID 2
#define MCHP_DMA_I2C1_MTR_REQ_ID 3
#define MCHP_DMA_I2C2_SLV_REQ_ID 4
#define MCHP_DMA_I2C2_MTR_REQ_ID 5
#define MCHP_DMA_I2C3_SLV_REQ_ID 6
#define MCHP_DMA_I2C3_MTR_REQ_ID 7
#define MCHP_DMA_I2C4_SLV_REQ_ID 8
#define MCHP_DMA_I2C4_MTR_REQ_ID 9
#define MCHP_DMA_QMSPI0_TX_REQ_ID 10
#define MCHP_DMA_QMSPI0_RX_REQ_ID 11
#define MCHP_DMA_SPI0_TX_REQ_ID 12
#define MCHP_DMA_SPI0_RX_REQ_ID 13
#define MCHP_DMA_SPI1_TX_REQ_ID 14
#define MCHP_DMA_SPI1_RX_REQ_ID 15

/*
 * Hardware delay register.
 * Write of 0 <= n <= 31 will stall the Cortex-M4
 * for n+1 microseconds. Interrupts will not be
 * serviced during the delay period. Reads have
 * no effect.
 */
#define MCHP_USEC_DELAY_REG_ADDR 0x08000000
#define MCHP_USEC_DELAY(x) (REG8(MCHP_USEC_DELAY_REG_ADDR) = (x))

#endif /* #ifndef __ASSEMBLER__ */