path: root/common/build.mk

# -*- makefile -*-
# Copyright 2014 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.
#
# Common files build
#

# Note that this variable includes the trailing "/"
_common_dir:=$(dir $(lastword $(MAKEFILE_LIST)))

common-y=util.o util_stdlib.o
common-y+=version.o printf.o queue.o queue_policies.o irq_locking.o

common-$(CONFIG_ACCELGYRO_BMI160)+=math_util.o
common-$(CONFIG_ACCELGYRO_BMI260)+=math_util.o
common-$(CONFIG_ACCELGYRO_BMI3XX)+=math_util.o
common-$(CONFIG_ACCELGYRO_ICM426XX)+=math_util.o
common-$(CONFIG_ACCELGYRO_ICM42607)+=math_util.o
common-$(CONFIG_ACCELGYRO_LSM6DS0)+=math_util.o
common-$(CONFIG_ACCELGYRO_LSM6DSM)+=math_util.o
common-$(CONFIG_ACCELGYRO_LSM6DSO)+=math_util.o
common-$(CONFIG_ACCEL_FIFO)+=motion_sense_fifo.o
common-$(CONFIG_ACCEL_BMA255)+=math_util.o
common-$(CONFIG_ACCEL_BMA4XX)+=math_util.o
common-$(CONFIG_ACCEL_LIS2DW12)+=math_util.o
common-$(CONFIG_ACCEL_LIS2DH)+=math_util.o
common-$(CONFIG_ACCEL_LIS2DS)+=math_util.o
common-$(CONFIG_ACCEL_KXCJ9)+=math_util.o
common-$(CONFIG_ACCEL_KX022)+=math_util.o
common-$(CONFIG_TEMP_SENSOR_TMP112)+=math_util.o
ifneq ($(CORE),cortex-m)
common-$(CONFIG_AES)+=aes.o
endif
common-$(CONFIG_AES_GCM)+=aes-gcm.o
common-$(CONFIG_CMD_ADC)+=adc.o
common-$(HAS_TASK_ALS)+=als.o
common-$(CONFIG_AP_HANG_DETECT)+=ap_hang_detect.o
common-$(CONFIG_AUDIO_CODEC)+=audio_codec.o
common-$(CONFIG_AUDIO_CODEC_DMIC)+=audio_codec_dmic.o
common-$(CONFIG_AUDIO_CODEC_I2S_RX)+=audio_codec_i2s_rx.o
common-$(CONFIG_AUDIO_CODEC_WOV)+=audio_codec_wov.o
common-$(CONFIG_BACKLIGHT_LID)+=backlight_lid.o
common-$(CONFIG_BASE32)+=base32.o
common-$(CONFIG_BLINK)+=blink.o
common-$(CONFIG_DETACHABLE_BASE)+=base_state.o
common-$(CONFIG_BATTERY)+=battery.o math_util.o
common-$(CONFIG_BATTERY_FUEL_GAUGE)+=battery_fuel_gauge.o
common-$(CONFIG_BLUETOOTH_LE)+=bluetooth_le.o
common-$(CONFIG_BLUETOOTH_LE_STACK)+=btle_hci_controller.o btle_ll.o
common-$(CONFIG_BODY_DETECTION)+=body_detection.o
common-$(CONFIG_CAPSENSE)+=capsense.o
common-$(CONFIG_CEC)+=cec.o
common-$(CONFIG_CBI_EEPROM)+=cbi.o cbi_eeprom.o
common-$(CONFIG_USB_PD_FLAGS)+=usb_pd_flags.o
common-$(CONFIG_CBI_GPIO)+=cbi.o cbi_gpio.o
ifeq ($(HAS_MOCK_CHARGE_MANAGER),)
common-$(CONFIG_CHARGE_MANAGER)+=charge_manager.o
endif
common-$(CONFIG_CHARGE_RAMP_HW)+=charge_ramp.o
common-$(CONFIG_CHARGE_RAMP_SW)+=charge_ramp.o charge_ramp_sw.o
common-$(CONFIG_CHIP_INIT_ROM_REGION)+=init_rom.o
common-$(CONFIG_CMD_CHARGEN) += chargen.o
common-$(CONFIG_CHARGER)+=charger.o charge_state_v2.o
common-$(CONFIG_CHARGER_PROFILE_OVERRIDE_COMMON)+=charger_profile_override.o
common-$(CONFIG_CMD_I2CWEDGE)+=i2c_wedge.o
common-$(CONFIG_COMMON_GPIO)+=gpio.o gpio_commands.o
common-$(CONFIG_IO_EXPANDER)+=ioexpander.o
common-$(CONFIG_COMMON_PANIC_OUTPUT)+=panic_output.o
common-$(CONFIG_COMMON_RUNTIME)+=hooks.o main.o system.o peripheral.o
common-$(CONFIG_COMMON_TIMER)+=timer.o
common-$(CONFIG_CRC8)+= crc8.o
common-$(CONFIG_CURVE25519)+=curve25519.o
ifneq ($(CORE),cortex-m0)
common-$(CONFIG_CURVE25519)+=curve25519-generic.o
endif
common-$(CONFIG_DEDICATED_RECOVERY_BUTTON)+=button.o
common-$(CONFIG_DEVICE_EVENT)+=device_event.o
common-$(CONFIG_DEVICE_STATE)+=device_state.o
common-$(CONFIG_DPTF)+=dptf.o
common-$(CONFIG_EC_EC_COMM_CLIENT)+=ec_ec_comm_client.o
common-$(CONFIG_EC_EC_COMM_SERVER)+=ec_ec_comm_server.o
common-$(CONFIG_HOSTCMD_ESPI)+=espi.o
common-$(CONFIG_EXTPOWER_GPIO)+=extpower_gpio.o
common-$(CONFIG_EXTPOWER)+=extpower_common.o
common-$(CONFIG_FANS)+=fan.o pwm.o
common-$(CONFIG_FLASH_CROS)+=flash.o
common-$(CONFIG_FMAP)+=fmap.o
common-$(CONFIG_GESTURE_SW_DETECTION)+=gesture.o
common-$(CONFIG_HOSTCMD_EVENTS)+=host_event_commands.o
common-$(CONFIG_HOSTCMD_GET_UPTIME_INFO)+=uptime.o
common-$(CONFIG_HOSTCMD_PD)+=host_command_controller.o
common-$(CONFIG_HOSTCMD_REGULATOR)+=regulator.o
common-$(CONFIG_HOSTCMD_RTC)+=rtc.o
common-$(CONFIG_I2C_DEBUG)+=i2c_trace.o
common-$(CONFIG_I2C_HID_TOUCHPAD)+=i2c_hid_touchpad.o
common-$(CONFIG_I2C_CONTROLLER)+=i2c_controller.o
common-$(CONFIG_I2C_PERIPHERAL)+=i2c_peripheral.o
common-$(CONFIG_I2C_BITBANG)+=i2c_bitbang.o
common-$(CONFIG_I2C_VIRTUAL_BATTERY)+=virtual_battery.o
common-$(CONFIG_INDUCTIVE_CHARGING)+=inductive_charging.o
common-$(CONFIG_KEYBOARD_PROTOCOL_8042)+=keyboard_8042.o \
	keyboard_8042_sharedlib.o
common-$(CONFIG_KEYBOARD_PROTOCOL_MKBP)+=keyboard_mkbp.o mkbp_fifo.o \
	mkbp_info.o
common-$(CONFIG_KEYBOARD_TEST)+=keyboard_test.o
common-$(CONFIG_KEYBOARD_VIVALDI)+=keyboard_vivaldi.o
common-$(CONFIG_MKBP_INPUT_DEVICES)+=mkbp_input_devices.o mkbp_fifo.o \
	mkbp_info.o
common-$(CONFIG_LED_COMMON)+=led_common.o
common-$(CONFIG_LED_POLICY_STD)+=led_policy_std.o
common-$(CONFIG_LED_PWM)+=led_pwm.o
common-$(CONFIG_LED_ONOFF_STATES)+=led_onoff_states.o
common-$(CONFIG_LID_ANGLE)+=motion_lid.o math_util.o
common-$(CONFIG_LID_ANGLE_UPDATE)+=lid_angle.o
common-$(CONFIG_LID_SWITCH)+=lid_switch.o
common-$(CONFIG_HOSTCMD_X86)+=acpi.o port80.o ec_features.o
common-$(CONFIG_MAG_CALIBRATE)+= mag_cal.o math_util.o vec3.o mat33.o mat44.o \
	kasa.o
common-$(CONFIG_MKBP_EVENT)+=mkbp_event.o
common-$(CONFIG_OCPC)+=ocpc.o
common-$(CONFIG_ONEWIRE)+=onewire.o
common-$(CONFIG_ORIENTATION_SENSOR)+=motion_orientation.o
common-$(CONFIG_PECI_COMMON)+=peci.o
common-$(CONFIG_PERIPHERAL_CHARGER)+=peripheral_charger.o
common-$(CONFIG_POWER_BUTTON)+=power_button.o
common-$(CONFIG_POWER_BUTTON_X86)+=power_button_x86.o
common-$(CONFIG_PSTORE)+=pstore_commands.o
common-$(CONFIG_PWM)+=pwm.o
common-$(CONFIG_PWM_KBLIGHT)+=pwm_kblight.o
common-$(CONFIG_KEYBOARD_BACKLIGHT)+=keyboard_backlight.o
common-$(CONFIG_RSA)+=rsa.o
common-$(CONFIG_ROLLBACK)+=rollback.o
common-$(CONFIG_RWSIG)+=rwsig.o vboot/common.o
common-$(CONFIG_RWSIG_TYPE_RWSIG)+=vboot/vb21_lib.o
common-$(CONFIG_MATH_UTIL)+=math_util.o
common-$(CONFIG_ONLINE_CALIB)+=stillness_detector.o kasa.o math_util.o \
	mat44.o vec3.o newton_fit.o accel_cal.o online_calibration.o \
	mkbp_event.o mag_cal.o math_util.o mat33.o gyro_cal.o gyro_still_det.o
common-$(CONFIG_SHA1)+= sha1.o
ifeq ($(CONFIG_SHA256),y)
# use the standard software SHA256 lib if the chip cannot support SHA256
# hardware accelerator.
ifeq ($(CONFIG_SHA256_HW_ACCELERATE),)
common-y+=sha256.o
endif
endif
common-$(CONFIG_SOFTWARE_CLZ)+=clz.o
common-$(CONFIG_SOFTWARE_CTZ)+=ctz.o
common-$(CONFIG_CMD_SPI_XFER)+=spi_commands.o
common-$(CONFIG_SPI_FLASH)+=spi_flash.o spi_flash_reg.o
common-$(CONFIG_SPI_FLASH_REGS)+=spi_flash_reg.o
common-$(CONFIG_SPI_NOR)+=spi_nor.o
common-$(CONFIG_SWITCH)+=switch.o
common-$(CONFIG_SW_CRC)+=crc.o
common-$(CONFIG_TABLET_MODE)+=tablet_mode.o
common-$(CONFIG_TEMP_SENSOR)+=temp_sensor.o
common-$(CONFIG_THROTTLE_AP)+=thermal.o throttle_ap.o
common-$(CONFIG_THROTTLE_AP_ON_BAT_DISCHG_CURRENT)+=throttle_ap.o
common-$(CONFIG_THROTTLE_AP_ON_BAT_VOLTAGE)+=throttle_ap.o
common-$(CONFIG_USB_CHARGER)+=usb_charger.o
common-$(CONFIG_USB_CONSOLE_STREAM)+=usb_console_stream.o
common-$(CONFIG_USB_I2C)+=usb_i2c.o
common-$(CONFIG_USB_PORT_POWER_DUMB)+=usb_port_power_dumb.o
common-$(CONFIG_USB_PORT_POWER_SMART)+=usb_port_power_smart.o
common-$(CONFIG_HAS_TASK_PD_INT)+=usbc_intr_task.o
ifneq ($(CONFIG_USB_POWER_DELIVERY),)
common-$(CONFIG_USB_POWER_DELIVERY)+=usb_common.o
ifneq ($(CONFIG_USB_PD_TCPMV1),)
common-$(CONFIG_USB_POWER_DELIVERY)+=usb_pd_protocol.o usb_pd_policy.o
endif
common-$(CONFIG_USB_PD_DUAL_ROLE)+=usb_pd_dual_role.o
common-$(CONFIG_USB_PD_HOST_CMD)+=usb_pd_host_cmd.o
common-$(CONFIG_USB_PD_CONSOLE_CMD)+=usb_pd_console_cmd.o
endif
common-$(CONFIG_USB_PD_ALT_MODE_DFP)+=usb_pd_alt_mode_dfp.o
common-$(CONFIG_USB_PD_ALT_MODE_UFP)+=usb_pd_alt_mode_ufp.o
common-$(CONFIG_USB_PD_DPS)+=dps.o
common-$(CONFIG_USB_PD_LOGGING)+=event_log.o pd_log.o
common-$(CONFIG_USB_PD_TCPC)+=usb_pd_tcpc.o
common-$(CONFIG_USB_UPDATE)+=usb_update.o update_fw.o
common-$(CONFIG_USBC_OCP)+=usbc_ocp.o
common-$(CONFIG_USBC_PPC)+=usbc_ppc.o
common-$(CONFIG_VBOOT_EFS)+=vboot/vboot.o
common-$(CONFIG_VBOOT_EFS2)+=vboot/efs2.o
ifeq ($(CONFIG_VBOOT_HASH),y)
common-y+=vboot_hash.o
# use the standard software SHA256 lib if the chip cannot support SHA256
# hardware accelerator.
ifeq ($(CONFIG_SHA256_HW_ACCELERATE),)
common-y+=sha256.o
endif
endif
common-$(CONFIG_VOLUME_BUTTONS)+=button.o
common-$(CONFIG_VSTORE)+=vstore.o
common-$(CONFIG_WEBUSB_URL)+=webusb_desc.o
common-$(CONFIG_WIRELESS)+=wireless.o
common-$(HAS_TASK_CHIPSET)+=chipset.o
common-$(HAS_TASK_CONSOLE)+=console.o console_output.o
common-$(HAS_TASK_CONSOLE)+=uart_buffering.o uart_hostcmd.o uart_printf.o
common-$(CONFIG_CMD_MEM)+=memory_commands.o
common-$(HAS_TASK_HOSTCMD)+=host_command.o ec_features.o
common-$(HAS_TASK_PDCMD)+=host_command_pd.o
common-$(HAS_TASK_KEYSCAN)+=keyboard_scan.o
common-$(HAS_TASK_LIGHTBAR)+=lb_common.o lightbar.o
common-$(HAS_TASK_MOTIONSENSE)+=motion_sense.o

ifneq ($(HAVE_PRIVATE_AUDIO_CODEC_WOV_LIBS),y)
common-$(CONFIG_AUDIO_CODEC_WOV)+=hotword_dsp_api.o
endif

ifneq ($(CONFIG_COMMON_RUNTIME),)
common-$(CONFIG_MALLOC)+=shmalloc.o
common-$(call not_cfg,$(CONFIG_MALLOC))+=shared_mem.o
endif

ifeq ($(CTS_MODULE),)
common-$(TEST_BUILD)+=test_util.o
else
common-y+=test_util.o
endif

ifneq ($(CONFIG_RSA_OPTIMIZED),)
$(out)/RW/common/rsa.o: CFLAGS+=-O3
$(out)/RO/common/rsa.o: CFLAGS+=-O3
endif

# AES-GCM code needs C99, else we'd have to move many variables declarations
# around.
$(out)/RW/common/aes-gcm.o: CFLAGS+=-std=c99 -Wno-declaration-after-statement
$(out)/RO/common/aes-gcm.o: CFLAGS+=-std=c99 -Wno-declaration-after-statement

ifneq ($(CONFIG_BOOTBLOCK),)

ifdef BOOTBLOCK

# verify the file size is less than or equal to DEFAULT_BOOTBLOCK_SIZE
$(shell test `stat -c "%s" "$(BOOTBLOCK)"` -le "$(DEFAULT_BOOTBLOCK_SIZE)")
ifneq ($(.SHELLSTATUS),0)
$(error bootblock $(BOOTBLOCK) larger than $(DEFAULT_BOOTBLOCK_SIZE) bytes)
endif

else

# generate a fake bootblock file
BOOTBLOCK := $(out)/.fake-bootblock

.PHONY: $(out)/.fake-bootblock
$(out)/.fake-bootblock:
	@dd if=/dev/zero of=$@ bs=1 count=$(DEFAULT_BOOTBLOCK_SIZE) status=none

endif # BOOTBLOCK

$(out)/bootblock_data.h: $(out)/util/gen_emmc_transfer_data $(out)/.bootblock
	$(call quiet,emmc_bootblock,BTBLK  )

# We only want to repack the bootblock if: $(BOOTBLOCK) variable value has
# changed, or the file pointed at by $(BOOTBLOCK) has changed. We do this
# by recording the latest $(BOOTBLOCK) file information in .bootblock
# TODO: Need a better makefile tricks to do this.

bootblock_ls := $(shell ls -l "$(BOOTBLOCK)" 2>&1)
old_bootblock_ls := $(shell cat $(out)/.bootblock 2>/dev/null)

$(out)/.bootblock: $(BOOTBLOCK)
	@echo "$(bootblock_ls)" > $@

ifneq ($(bootblock_ls),$(old_bootblock_ls))
.PHONY: $(out)/.bootblock
endif
endif # CONFIG_BOOTBLOCK

ifneq ($(CONFIG_TOUCHPAD_HASH_FW),)
$(out)/RO/common/update_fw.o: $(out)/touchpad_fw_hash.h
$(out)/RW/common/update_fw.o: $(out)/touchpad_fw_hash.h

$(out)/touchpad_fw_hash.h: $(out)/util/gen_touchpad_hash $(out)/.touchpad_fw
	$(call quiet,tp_hash,TPHASH )

# We only want to recompute the hash if: $(TOUCHPAD_FW) variable value has
# changed, or the file pointed at by $(TOUCHPAD_FW) has changed. We do this
# by recording the latest $(TOUCHPAD_FW) file information in .touchpad_fw.

touchpad_fw_ls := $(shell ls -l "$(TOUCHPAD_FW)" 2>&1)
old_touchpad_fw_ls := $(shell cat $(out)/.touchpad_fw 2>/dev/null)

$(out)/.touchpad_fw: $(TOUCHPAD_FW)
	@echo "$(touchpad_fw_ls)" > $@

ifneq ($(touchpad_fw_ls),$(old_touchpad_fw_ls))
.PHONY: $(out)/.touchpad_fw
endif
endif

ifeq ($(TEST_BUILD),)

ifeq ($(CONFIG_RMA_AUTH_USE_P256),)
BLOB_FILE = rma_key_blob.x25519.test
else
BLOB_FILE = rma_key_blob.p256.test
endif

$(out)/RW/common/rma_auth.o: $(out)/rma_key_from_blob.h

$(out)/rma_key_from_blob.h: board/$(BOARD)/$(BLOB_FILE) util/bin2h.sh
	$(Q)util/bin2h.sh RMA_KEY_BLOB $< $@

endif