mb/google/drallion: Add memory init setup for drallion

This implementation adds below support
1. Add support to read memory strap
2. Add support to configure below memory parameters
  -> rcomp resistor configuration
  -> dqs mapping
  -> ect and ca vref config

Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com>
Change-Id: I9993ad175e6f52711d5a05733aeab1bbed1e0b80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>

3 files changed, 58 insertions, 1 deletions

diff --git a/src/mainboard/google/drallion/romstage.c b/src/mainboard/google/drallion/romstage.c
index c9f009e599..03bc17f185 100644
--- a/src/mainboard/google/drallion/romstage.c
+++ b/src/mainboard/google/drallion/romstage.c
@@ -58,11 +58,18 @@ static const struct cnl_mb_cfg memcfg = {
 	.vref_ca_config = 2,
 };
 
+const struct cnl_mb_cfg * __weak get_variant_memory_cfg(struct cnl_mb_cfg *mem_cfg)
+{
+	return &memcfg;
+}
+
 void mainboard_memory_init_params(FSPM_UPD *memupd)
 {
+	struct cnl_mb_cfg board_memcfg;
+
 	variant_mainboard_post_init_params(memupd);
 
 	wilco_ec_romstage_init();
 
-	cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg);
+	cannonlake_memcfg_init(&memupd->FspmConfig, get_variant_memory_cfg(&board_memcfg));
 }
diff --git a/src/mainboard/google/drallion/variants/baseboard/include/baseboard/variants.h b/src/mainboard/google/drallion/variants/baseboard/include/baseboard/variants.h
index 1edd660bbe..eb1d9aec48 100644
--- a/src/mainboard/google/drallion/variants/baseboard/include/baseboard/variants.h
+++ b/src/mainboard/google/drallion/variants/baseboard/include/baseboard/variants.h
@@ -17,7 +17,11 @@
 #define BASEBOARD_VARIANTS_H
 
 #include <fsp/api.h>
+#include <soc/cnl_memcfg_init.h>
 
 void variant_mainboard_post_init_params(FSPM_UPD *mupd);
 
+/* Return board specific memory configuration */
+const struct cnl_mb_cfg *get_variant_memory_cfg(struct cnl_mb_cfg *mem_cfg);
+
 #endif /* BASEBOARD_VARIANTS_H */
diff --git a/src/mainboard/google/drallion/variants/drallion/memory.c b/src/mainboard/google/drallion/variants/drallion/memory.c
index c837805016..10996a3e7b 100644
--- a/src/mainboard/google/drallion/variants/drallion/memory.c
+++ b/src/mainboard/google/drallion/variants/drallion/memory.c
@@ -16,6 +16,8 @@
 #include <variant/variant.h>
 #include <gpio.h>
 #include <variant/gpio.h>
+#include <baseboard/variants.h>
+#include <string.h>
 
 /* Use spd_index array to save mem_id */
 static const int spd_index[32] = {
@@ -25,6 +27,50 @@ static const int spd_index[32] = {
 	5, 0, 7, 2, 0, 0, 0, 0
 	};
 
+const struct cnl_mb_cfg *get_variant_memory_cfg(struct cnl_mb_cfg *mem_cfg)
+{
+	int mem_sku;
+	struct cnl_mb_cfg baseboard_memcfg  = {
+		/*
+		* The dqs_map arrays map the ddr4 pins to the SoC pins
+		* for both channels.
+		*
+		* the index = pin number on ddr4 part
+		* the value = pin number on SoC
+		*/
+		.dqs_map[DDR_CH0] = { 0, 1, 4, 5, 2, 3, 6, 7 },
+		.dqs_map[DDR_CH1] = { 0, 1, 4, 5, 2, 3, 6, 7 },
+
+		/* Baseboard uses 120, 81 and 100 rcomp resistors */
+		.rcomp_resistor = { 120, 81, 100 },
+
+		/* Baseboard Rcomp target values */
+		.rcomp_targets = { 100, 40, 20, 20, 26 },
+
+		/* Set CaVref config to 2 */
+		.vref_ca_config = 2,
+
+		/* Enable Early Command Training */
+		.ect = 1,
+	};
+
+	mem_sku = variant_memory_sku();
+
+	memcpy(mem_cfg, &baseboard_memcfg, sizeof(baseboard_memcfg));
+
+	/* In Drallion dual channel is enabled by default.
+	 * spd[0]-spd[3] map to CH0D0, CH0D1, CH1D0, Ch1D1 respectively.
+	 * Dual-DIMM memory is not used in drallion family, so we only
+	 * fill in spd info for CH0D0 and CH1D0 here.
+	 */
+	for (int i = 0; i < 3; i = i+2) {
+		mem_cfg->spd[i].read_type = READ_SPD_CBFS;
+		mem_cfg->spd[i].spd_spec.spd_index = mem_sku;
+	}
+
+	return mem_cfg;
+}
+
 int variant_memory_sku(void)
 {
 	gpio_t spd_gpios[] = {