tests: Add support for tests build failures detection

This patch introduces new target: junit.xml-unit-tests, which builds and
runs unit-tests. It also creates build log containing build logs. This
feature allows for one to see build failures in Jenkins dashboard.

Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I94184379dcc2ac10f1a47f4a9d205cacbeb640fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67372
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

4 files changed, 99 insertions, 12 deletions

diff --git a/payloads/libpayload/tests/Makefile.inc b/payloads/libpayload/tests/Makefile.inc
index 2a067e0f9f..dede3404c5 100644
--- a/payloads/libpayload/tests/Makefile.inc
+++ b/payloads/libpayload/tests/Makefile.inc
@@ -202,19 +202,61 @@ $(TEST_KCONFIG_AUTOHEADER): $(TEST_DOTCONFIG) $(objk)/conf
 $(TEST_KCONFIG_AUTOCONFIG): $(TEST_KCONFIG_AUTOHEADER)
 	true
 
-.PHONY: $(alltests) $(addprefix clean-,$(alltests))
+.PHONY: $(alltests) $(addprefix clean-,$(alltests)) $(addprefix try-,$(alltests))
+.PHONY: $(addprefix build-,$(alltests)) $(addprefix run-,$(alltests))
 .PHONY: unit-tests build-unit-tests run-unit-tests clean-unit-tests
+.PHONY: junit.xml-unit-tests clean-junit.xml-unit-tests
 
 ifeq ($(JUNIT_OUTPUT),y)
-$(alltests): export CMOCKA_MESSAGE_OUTPUT=xml
-$(alltests): export CMOCKA_XML_FILE=$(testobj)/junit-%g.xml
+$(addprefix run-,$(alltests)): export CMOCKA_MESSAGE_OUTPUT=xml
+$(addprefix run-,$(alltests)): export CMOCKA_XML_FILE=$(testobj)/junit-libpayload-%g.xml
 endif
 
-$(alltests): $$($$(@)-bin)
+$(addprefix run-,$(alltests)): run-%: $$(%-bin)
 	rm -f $(testobj)/junit-libpayload-$(subst /,_,$(patsubst $(testobj)/%/,%,$(dir $^)))\(*\).xml
 	rm -f $(testobj)/$(subst /,_,$^).failed
 	-$^ || echo failed > $(testobj)/$(subst /,_,$^).failed
 
+$(addprefix build-,$(alltests)): build-%: $$(%-bin)
+
+$(alltests): run-$$(@)
+
+$(addprefix try-,$(alltests)): try-%: clean-% $(CMOCKA_LIB) $(TEST_KCONFIG_AUTOCONFIG)
+	mkdir -p $(testobj)/$*
+	echo "<testcase classname='libpayload_build_unit_test' name='$*'>" >> $(testobj)/$*.tmp; \
+	$(MAKE) V=$(V) Q=$(Q) COV=$(COV) JUNIT_OUTPUT=y "build-$*" >> $(testobj)/$*.tmp.2 2>&1 \
+		&& type="system-out" || type="failure"; \
+	if [ $$type = "failure" ]; then \
+		echo "<failure type='buildFailed'>" >> $(testobj)/$*.tmp; \
+	else \
+		echo "<$$type>" >> $(testobj)/$*.tmp; \
+	fi; \
+	echo '<![CDATA[' >> $(testobj)/$*.tmp; \
+	cat $(testobj)/$*.tmp.2 >> $(testobj)/$*.tmp; \
+	echo "]]></$$type>" >> $(testobj)/$*.tmp; \
+	rm -f $(testobj)/$*.tmp.2; \
+	echo "</testcase>" >> $(testobj)/$*.tmp; \
+	if [ $$type != 'failure' ]; then \
+		$(MAKE) V=$(V) Q=$(Q) COV=$(COV) JUNIT_OUTPUT=y "run-$*"; \
+	fi
+
+
+TESTS_BUILD_XML_FILE := $(testobj)/junit-libpayload-tests-build.xml
+
+$(TESTS_BUILD_XML_FILE): clean-junit.xml-unit-tests $(addprefix try-,$(alltests))
+	mkdir -p $(dir $@)
+	echo '<?xml version="1.0" encoding="utf-8"?><testsuite>' > $@
+	for tst in $(alltests); do \
+		cat $(testobj)/$$tst.tmp >> $@; \
+	done
+	echo "</testsuite>" >> $@
+
+junit.xml-unit-tests: $(TESTS_BUILD_XML_FILE)
+
+clean-junit.xml-unit-tests:
+	rm -f $(TESTS_BUILD_XML_FILE)
+
+
 # Build a code coverage report by collecting all the gcov files into a single
 # report. If COV is not set, this might be a user error, and they're trying
 # to generate a coverage report without first having built and run the code
@@ -254,7 +296,7 @@ run-unit-tests: $(alltests)
 		exit 0; \
 	fi
 
-$(addprefix clean-,$(alltests)): clean-%
+$(addprefix clean-,$(alltests)): clean-%:
 	rm -rf $(testobj)/$*
 
 clean-unit-tests:
diff --git a/tests/Makefile.common b/tests/Makefile.common
index 04bd6c94c3..595f870aca 100644
--- a/tests/Makefile.common
+++ b/tests/Makefile.common
@@ -170,3 +170,5 @@ $(TEST_KCONFIG_AUTOHEADER): $(TEST_DOTCONFIG) $(objutil)/kconfig/conf
 
 $(TEST_KCONFIG_AUTOCONFIG): $(TEST_KCONFIG_AUTOHEADER)
 	true
+
+TEST_COMMON_DEPENDENCIES := $(CMOCKA_LIB) $(TEST_KCONFIG_AUTOCONFIG)
diff --git a/tests/Makefile.inc b/tests/Makefile.inc
index 10caf0a1e1..2c1a30bb8d 100644
--- a/tests/Makefile.inc
+++ b/tests/Makefile.inc
@@ -60,22 +60,64 @@ $(foreach test, $(alltests), \
 DEPENDENCIES += $(addsuffix .d,$(basename $(all-test-objs)))
 -include $(DEPENDENCIES)
 
-.PHONY: $(alltests) $(addprefix clean-,$(alltests))
+.PHONY: $(alltests) $(addprefix clean-,$(alltests)) $(addprefix try-,$(alltests))
+.PHONY: $(addprefix build-,$(alltests)) $(addprefix run-,$(alltests))
 .PHONY: unit-tests build-unit-tests run-unit-tests clean-unit-tests
+.PHONY: junit.xml-unit-tests clean-junit.xml-unit-tests
 
 # %g in CMOCKA_XML_FILE will be replaced with "__TEST_NAME__(<test-group-name>)"
 # by macro cb_run_group_tests(), which should be used for running tests.
 # __TEST_NAME__ contains test name including path e.g. tests_lib_rtc-test
 ifeq ($(JUNIT_OUTPUT),y)
-$(alltests): export CMOCKA_MESSAGE_OUTPUT=xml
-$(alltests): export CMOCKA_XML_FILE=$(testobj)/junit-%g.xml
+$(addprefix run-,$(alltests)): export CMOCKA_MESSAGE_OUTPUT=xml
+$(addprefix run-,$(alltests)): export CMOCKA_XML_FILE=$(testobj)/junit-%g.xml
 endif
 
-$(alltests): $$($$(@)-bin)
+$(addprefix run-,$(alltests)): run-%: $$(%-bin)
 	rm -f $(testobj)/junit-$(subst /,_,$(patsubst $(testobj)/%/,%,$(dir $^)))\(*\).xml
 	rm -f $(testobj)/$(subst /,_,$^).failed
 	-$^ || echo failed > $(testobj)/$(subst /,_,$^).failed
 
+$(addprefix build-,$(alltests)): build-%: $$(%-bin)
+
+$(alltests): run-$$(@)
+
+$(addprefix try-,$(alltests)): try-%: clean-% $(TEST_COMMON_DEPENDENCIES)
+	mkdir -p $(testobj)/$*
+	echo "<testcase classname='coreboot_build_unit_test' name='$*'>" >> $(testobj)/$*.tmp; \
+	$(MAKE) V=$(V) Q=$(Q) COV=$(COV) JUNIT_OUTPUT=y "build-$*" >> $(testobj)/$*.tmp.2 2>&1 \
+		&& type="system-out" || type="failure"; \
+	if [ $$type = "failure" ]; then \
+		echo "<failure type='buildFailed'>" >> $(testobj)/$*.tmp; \
+	else \
+		echo "<$$type>" >> $(testobj)/$*.tmp; \
+	fi; \
+	echo '<![CDATA[' >> $(testobj)/$*.tmp; \
+	cat $(testobj)/$*.tmp.2 >> $(testobj)/$*.tmp; \
+	echo "]]></$$type>" >> $(testobj)/$*.tmp; \
+	rm -f $(testobj)/$*.tmp.2; \
+	echo "</testcase>" >> $(testobj)/$*.tmp; \
+	if [ $$type != 'failure' ]; then \
+		$(MAKE) V=$(V) Q=$(Q) COV=$(COV) JUNIT_OUTPUT=y "run-$*"; \
+	fi
+
+
+TESTS_BUILD_XML_FILE := $(testobj)/junit-tests-build.xml
+
+$(TESTS_BUILD_XML_FILE): clean-junit.xml-unit-tests $(addprefix try-,$(alltests))
+	mkdir -p $(dir $@)
+	echo '<?xml version="1.0" encoding="utf-8"?><testsuite>' > $@
+	for tst in $(alltests); do \
+		cat $(testobj)/$$tst.tmp >> $@; \
+	done
+	echo "</testsuite>" >> $@
+
+junit.xml-unit-tests: $(TESTS_BUILD_XML_FILE)
+
+clean-junit.xml-unit-tests:
+	rm -f $(TESTS_BUILD_XML_FILE)
+
+
 # Build a code coverage report by collecting all the gcov files into a single
 # report. If COV is not set, this might be a user error, and they're trying
 # to generate a coverage report without first having built and run the code
diff --git a/util/testing/Makefile.inc b/util/testing/Makefile.inc
index df6a25ef94..d9bc83fe48 100644
--- a/util/testing/Makefile.inc
+++ b/util/testing/Makefile.inc
@@ -104,9 +104,10 @@ endif
 	$(MAKE) xcompile=$(COREBOOT_BUILD_DIR)/xcompile $(COREBOOT_BUILD_DIR)/xcompile
 	$(MAKE) CPUS=$(CPUS) V=$(V) Q=$(Q) BLD_DIR=src/soc/nvidia/tegra124/lp0 BLD=tegra124_lp0 MFLAGS= MAKEFLAGS=xcompile=$(COREBOOT_BUILD_DIR)/xcompile MAKETARGET=all junit.xml
 	$(MAKE) CPUS=$(CPUS) V=$(V) Q=$(Q) BLD_DIR=src/soc/nvidia/tegra210/lp0 BLD=tegra120_lp0 MFLAGS= MAKEFLAGS=xcompile=$(COREBOOT_BUILD_DIR)/xcompile MAKETARGET=all junit.xml
-	$(MAKE) unit-tests JUNIT_OUTPUT=y COV=1
-	(cd payloads/libpayload; unset COREBOOT_BUILD_DIR; $(MAKE) unit-tests coverage-report JUNIT_OUTPUT=y COV=1)
-	$(MAKE) coverage-report JUNIT_OUTPUT=y COV=1
+	+$(MAKE) junit.xml-unit-tests COV=1
+	+(cd payloads/libpayload; unset COREBOOT_BUILD_DIR; $(MAKE) junit.xml-unit-tests COV=1)
+	+(cd payloads/libpayload; unset COREBOOT_BUILD_DIR; $(MAKE) coverage-report COV=1)
+	+$(MAKE) coverage-report JUNIT_OUTPUT=y COV=1
 	find . -name 'tests.info' -exec cat {} + >$(COREBOOT_BUILD_DIR)/coverage.info
 
 test-basic: test-lint test-tools test-abuild test-payloads test-cleanup