diff options
Diffstat (limited to 'src/mainboard/hp/snb_ivb_laptops/variants/8460p/devicetree.cb')
-rw-r--r-- | src/mainboard/hp/snb_ivb_laptops/variants/8460p/devicetree.cb | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/src/mainboard/hp/snb_ivb_laptops/variants/8460p/devicetree.cb b/src/mainboard/hp/snb_ivb_laptops/variants/8460p/devicetree.cb new file mode 100644 index 0000000000..5bbb4feb3c --- /dev/null +++ b/src/mainboard/hp/snb_ivb_laptops/variants/8460p/devicetree.cb @@ -0,0 +1,115 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2017 Iru Cai <mytbk920423@gmail.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +chip northbridge/intel/sandybridge + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.ndid" = "3" + register "gfx.use_spread_spectrum_clock" = "1" + register "gpu_cpu_backlight" = "0x00000129" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "4" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "2000" + register "gpu_panel_power_backlight_on_delay" = "2000" + register "gpu_panel_power_cycle_delay" = "5" + register "gpu_panel_power_down_delay" = "230" + register "gpu_panel_power_up_delay" = "300" + register "gpu_pch_backlight" = "0x02880288" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on end + device lapic 0xacac off end + end + end + device domain 0x0 on + subsystemid 0x103c 0x161c inherit + + device pci 00.0 on end # Host bridge + device pci 01.0 on end # PCIe Bridge for discrete graphics + device pci 02.0 on end # Internal graphics + + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + # mailbox at 0x200/0x201 and PM1 at 0x220 + register "gen1_dec" = "0x007c0201" + register "gen2_dec" = "0x000c0101" + register "gen3_dec" = "0x00fcfe01" + register "gen4_dec" = "0x000402e9" + register "gpi6_routing" = "2" + register "pcie_hotplug_map" = "{ 0, 1, 1, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + # HDD(0), ODD(1), docking(3,5), eSATA(4) + register "sata_port_map" = "0x3b" + register "spi_uvscc" = "0x2005" + register "spi_lvscc" = "0" + + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 on end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # HD Audio controller + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2, ExpressCard + device pci 1c.2 on end # PCIe Port #3, SD/MMC + device pci 1c.3 on end # PCIe Port #4, WLAN + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 on end # PCIe Port #7, WWAN + device pci 1c.7 on end # PCIe Port #8, NEC USB 3.0 Host Controller + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + chip ec/hp/kbc1126 + register "ec_data_port" = "0x60" + register "ec_cmd_port" = "0x64" + register "ec_ctrl_reg" = "0xca" + register "ec_fan_ctrl_value" = "0x6b" + device pnp ff.1 off end + end + chip superio/smsc/lpc47n217 + device pnp 4e.3 on # Parallel + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.4 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.5 off end # COM2 + end + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + end +end |