diff options
Diffstat (limited to 'src/mainboard/intel/leafhill/variants/snappy')
4 files changed, 0 insertions, 354 deletions
diff --git a/src/mainboard/intel/leafhill/variants/snappy/devicetree.cb b/src/mainboard/intel/leafhill/variants/snappy/devicetree.cb deleted file mode 100644 index e46483e3b0..0000000000 --- a/src/mainboard/intel/leafhill/variants/snappy/devicetree.cb +++ /dev/null @@ -1,223 +0,0 @@ -chip soc/intel/apollolake - - device cpu_cluster 0 on - device lapic 0 on end - end - - register "pcie_rp0_clkreq_pin" = "0" # wifi/bt - # Disable unused clkreq of PCIe root ports - register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED" - register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED" - - # GPIO for PERST_0 - # If the Board has PERST_0 signal, assign the GPIO - # If the Board does not have PERST_0, assign GPIO_PRT0_UDEF - register "prt0_gpio" = "GPIO_122" - - # EMMC TX DATA Delay 1 - # Refer to EDS-Vol2-22.3. - # [14:8] steps of delay for HS400, each 125ps. - # [6:0] steps of delay for SDR104/HS200, each 125ps. - register "emmc_tx_data_cntl1" = "0x0C16" - - # EMMC TX DATA Delay 2 - # Refer to EDS-Vol2-22.3. - # [30:24] steps of delay for SDR50, each 125ps. - # [22:16] steps of delay for DDR50, each 125ps. - # [14:8] steps of delay for SDR25/HS50, each 125ps. - # [6:0] steps of delay for SDR12, each 125ps. - register "emmc_tx_data_cntl2" = "0x28162828" - - # EMMC RX CMD/DATA Delay 1 - # Refer to EDS-Vol2-22.3. - # [30:24] steps of delay for SDR50, each 125ps. - # [22:16] steps of delay for DDR50, each 125ps. - # [14:8] steps of delay for SDR25/HS50, each 125ps. - # [6:0] steps of delay for SDR12, each 125ps. - register "emmc_rx_cmd_data_cntl1" = "0x00181717" - - # EMMC RX CMD/DATA Delay 2 - # Refer to EDS-Vol2-22.3. - # [17:16] stands for Rx Clock before Output Buffer - # [14:8] steps of delay for Auto Tuning Mode, each 125ps. - # [6:0] steps of delay for HS200, each 125ps. - register "emmc_rx_cmd_data_cntl2" = "0x10008" - - # Enable DPTF - register "dptf_enable" = "1" - - # PL1 override 12000 mW: the energy calculation is wrong with the - # current VR solution. Experiments show that SoC TDP max (6W) can - # be reached when RAPL PL1 is set to 12W. - register "tdp_pl1_override_mw" = "12000" - - # Enable Audio Clock and Power gating - register "hdaudio_clk_gate_enable" = "1" - register "hdaudio_pwr_gate_enable" = "1" - register "hdaudio_bios_config_lockdown" = "1" - - # Enable lpss s0ix - register "lpss_s0ix_enable" = "1" - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route, i.e., if this route changes then the affected GPE - # offset bits also need to be changed. This sets the PMC register - # GPE_CFG fields. - register "gpe0_dw1" = "PMC_GPE_N_31_0" - register "gpe0_dw2" = "PMC_GPE_N_63_32" - register "gpe0_dw3" = "PMC_GPE_SW_31_0" - - # Enable I2C0 for audio codec at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 44, - .fall_time_ns = 22, - }" - - # Enable I2C2 bus early for TPM at 400kHz - register "i2c[2]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .rise_time_ns = 40, - .fall_time_ns = 20, - }" - - # touchscreen at 400kHz - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 70, - .fall_time_ns = 164, - }" - - # trackpad at 400kHz - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 20, - .fall_time_ns = 164, - }" - - # digitizer at 400kHz - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 152, - .fall_time_ns = 30, - }" - - # Minimum SLP S3 assertion width 28ms. - register "slp_s3_assertion_width_usecs" = "28000" - - device domain 0 on - device pci 00.0 on end # - Host Bridge - device pci 00.1 on end # - DPTF - device pci 00.2 on end # - NPK - device pci 02.0 on end # - Gen - device pci 03.0 on end # - Iunit - device pci 0d.0 on end # - P2SB - device pci 0d.1 on end # - PMC - device pci 0d.2 on end # - SPI - device pci 0d.3 on end # - Shared SRAM - device pci 0e.0 on # - Audio - chip drivers/generic/max98357a - register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)" - register "sdmode_delay" = "5" - device generic 0 on end - end - end - device pci 11.0 off end # - ISH - device pci 12.0 off end # - SATA - device pci 13.0 off end # - Root Port 2 - PCIe-A 0 - device pci 13.1 off end # - Root Port 3 - PCIe-A 1 - device pci 13.2 off end # - Root Port 4 - PCIe-A 2 - device pci 13.3 off end # - Root Port 5 - PCIe-A 3 - device pci 14.0 on - chip drivers/intel/wifi - register "wake" = "GPE0_DW3_00" - device pci 00.0 on end - end - end # - Root Port 0 - PCIe-B 0 - Wifi - device pci 14.1 off end # - Root Port 1 - PCIe-B 1 - device pci 15.0 on end # - XHCI - device pci 15.1 off end # - XDCI - device pci 16.0 on # - I2C 0 - chip drivers/i2c/da7219 - register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)" - register "btn_cfg" = "50" - register "mic_det_thr" = "500" - register "jack_ins_deb" = "20" - register "jack_det_rate" = ""32ms_64ms"" - register "jack_rem_deb" = "1" - register "a_d_btn_thr" = "0xa" - register "d_b_btn_thr" = "0x16" - register "b_c_btn_thr" = "0x21" - register "c_mic_btn_thr" = "0x3e" - register "btn_avg" = "4" - register "adc_1bit_rpt" = "1" - register "micbias_lvl" = "2600" - register "mic_amp_in_sel" = ""diff"" - device i2c 1a on end - end - end - device pci 16.1 on end # - I2C 1 - device pci 16.2 on - chip drivers/i2c/tpm - register "hid" = ""GOOG0005"" - register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)" - device i2c 50 on end - end - end # - I2C 2 - device pci 16.3 on - chip drivers/i2c/generic - register "hid" = ""ELAN0001"" - register "desc" = ""ELAN Touchscreen"" - register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)" - register "probed" = "1" - device i2c 10 on end - end - end # - I2C 3 - device pci 17.0 on - chip drivers/i2c/generic - register "hid" = ""ELAN0000"" - register "desc" = ""ELAN Touchpad"" - register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)" - register "wake" = "GPE0_DW1_15" - register "probed" = "1" - device i2c 15 on end - end - end # - I2C 4 - device pci 17.1 on - chip drivers/i2c/wacom - register "generic" = "{ - .hid = WCOM50C1_HID, - .cid = PNP0C50_CID, - .desc = WCOM_DT_DESC, - .irq = IRQ_LEVEL_LOW(GPIO_13_IRQ), - }" - register "hid_desc_reg_offset" = "0x1" - device i2c 0x9 on end - end - end # - I2C 5 - device pci 17.2 on end # - I2C 6 - device pci 17.3 on end # - I2C 7 - device pci 18.0 on end # - UART 0 - device pci 18.1 on end # - UART 1 - device pci 18.2 on end # - UART 2 - device pci 18.3 on end # - UART 3 - device pci 19.0 on end # - SPI 0 - device pci 19.1 on end # - SPI 1 - device pci 19.2 on end # - SPI 2 - device pci 1a.0 on end # - PWM - device pci 1b.0 on end # - SDCARD - device pci 1c.0 on end # - eMMC - device pci 1e.0 off end # - SDIO - device pci 1f.0 on # - LPC - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end - device pci 1f.1 on end # - SMBUS - end -end diff --git a/src/mainboard/intel/leafhill/variants/snappy/include/variant/acpi/dptf.asl b/src/mainboard/intel/leafhill/variants/snappy/include/variant/acpi/dptf.asl deleted file mode 100644 index a233c9213a..0000000000 --- a/src/mainboard/intel/leafhill/variants/snappy/include/variant/acpi/dptf.asl +++ /dev/null @@ -1,89 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * Copyright (C) 2015 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define DPTF_CPU_PASSIVE 100 -#define DPTF_CPU_CRITICAL 105 -#define DPTF_CPU_ACTIVE_AC0 90 -#define DPTF_CPU_ACTIVE_AC1 80 -#define DPTF_CPU_ACTIVE_AC2 70 -#define DPTF_CPU_ACTIVE_AC3 60 -#define DPTF_CPU_ACTIVE_AC4 50 - -#define DPTF_TSR0_SENSOR_ID 0 -#define DPTF_TSR0_SENSOR_NAME "Battery" -#define DPTF_TSR0_PASSIVE 48 -#define DPTF_TSR0_CRITICAL 70 - -#define DPTF_TSR1_SENSOR_ID 1 -#define DPTF_TSR1_SENSOR_NAME "Ambient" -#define DPTF_TSR1_PASSIVE 53 -#define DPTF_TSR1_CRITICAL 80 - -#define DPTF_TSR2_SENSOR_ID 2 -#define DPTF_TSR2_SENSOR_NAME "Charger" -#define DPTF_TSR2_PASSIVE 90 -#define DPTF_TSR2_CRITICAL 100 - -#define DPTF_ENABLE_CHARGER - -/* Charger performance states, board-specific values from charger and EC */ -Name (CHPS, Package () { - Package () { 0, 0, 0, 0, 255, 0xBB8, "mA", 0 }, /* 3A (MAX) */ - Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 }, /* 1.5A */ - Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 }, /* 1.0A */ - Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 }, /* 0.5A */ - Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 }, /* 0.0A */ -}) - -Name (DTRT, Package () { - /* CPU Throttle Effect on CPU */ - Package () { \_SB.PCI0.TCPU, \_SB.PCI0.TCPU, 100, 50, 0, 0, 0, 0 }, - - /* CPU Effect on Temp Sensor 0 */ - Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR0, 100, 600, 0, 0, 0, 0 }, - -#ifdef DPTF_ENABLE_CHARGER - /* Charger Effect on Temp Sensor 1 */ - Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR2, 100, 1200, 0, 0, 0, 0 }, -#endif - - /* CPU Effect on Temp Sensor 1 */ - Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR1, 200, 80, 0, 0, 0, 0 }, - - /* CPU Effect on Temp Sensor 2 */ - Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR2, 100, 150, 0, 0, 0, 0 }, -}) - -Name (MPPC, Package () -{ - 0x2, /* Revision */ - Package () { /* Power Limit 1 */ - 0, /* PowerLimitIndex, 0 for Power Limit 1 */ - 4000, /* PowerLimitMinimum */ - 12000, /* PowerLimitMaximum */ - 1000, /* TimeWindowMinimum */ - 1000, /* TimeWindowMaximum */ - 200 /* StepSize */ - }, - Package () { /* Power Limit 2 */ - 1, /* PowerLimitIndex, 1 for Power Limit 2 */ - 8000, /* PowerLimitMinimum */ - 8000, /* PowerLimitMaximum */ - 1000, /* TimeWindowMinimum */ - 1000, /* TimeWindowMaximum */ - 1000 /* StepSize */ - } -}) diff --git a/src/mainboard/intel/leafhill/variants/snappy/include/variant/ec.h b/src/mainboard/intel/leafhill/variants/snappy/include/variant/ec.h deleted file mode 100644 index 586f1064f4..0000000000 --- a/src/mainboard/intel/leafhill/variants/snappy/include/variant/ec.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2016 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MAINBOARD_EC_H -#define MAINBOARD_EC_H - -#include <baseboard/ec.h> - -#endif diff --git a/src/mainboard/intel/leafhill/variants/snappy/include/variant/gpio.h b/src/mainboard/intel/leafhill/variants/snappy/include/variant/gpio.h deleted file mode 100644 index 6d1ce5a0e4..0000000000 --- a/src/mainboard/intel/leafhill/variants/snappy/include/variant/gpio.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright 2016 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the - * GNU General Public License for more details. - */ - -#ifndef MAINBOARD_GPIO_H -#define MAINBOARD_GPIO_H - -#include <baseboard/gpio.h> - -#endif /* MAINBOARD_GPIO_H */ |