1 files changed, 59 insertions, 0 deletions
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl5/memory.c b/src/mainboard/siemens/mc_ehl/variants/mc_ehl5/memory.c
new file mode 100644
index 0000000000..7b7dad1129
--- /dev/null
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl5/memory.c
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <baseboard/variants.h>
+#include <gpio.h>
+#include <soc/meminit.h>
+#include <soc/romstage.h>
+
+static const struct mb_cfg mc_ehl_lpddr4x_memcfg_cfg = {
+
+	.dq_map[DDR_CH0] = {
+		{0xf, 0xf0},
+		{0xf, 0xf0},
+		{0xff, 0x0},
+		{0x0, 0x0},
+		{0x0, 0x0},
+		{0x0, 0x0}
+	},
+
+	.dq_map[DDR_CH1] = {
+		{0xf, 0xf0},
+		{0xf, 0xf0},
+		{0xff, 0x0},
+		{0x0, 0x0},
+		{0x0, 0x0},
+		{0x0, 0x0}
+	},
+
+	/*
+	 * The dqs_map arrays map the ddr4 pins to the SoC pins
+	 * for both channels.
+	 *
+	 * the index = pin number on ddr4 part
+	 * the value = pin number on SoC
+	 */
+	.dqs_map[DDR_CH0] = {3, 0, 1, 2, 7, 4, 5, 6},
+	.dqs_map[DDR_CH1] = {3, 0, 1, 2, 7, 4, 5, 6},
+
+	/* Baseboard uses 100, 100 and 100 rcomp resistors */
+	.rcomp_resistor = {100, 100, 100},
+
+	.rcomp_targets = {60, 40, 30, 20, 30},
+
+	/* LPDDR4x does not allow interleaved memory */
+	.dq_pins_interleaved = 0,
+
+	/* Baseboard is using config 2 for vref_ca */
+	.vref_ca_config = 2,
+
+	/* Enable Early Command Training */
+	.ect = 1,
+
+	/* Set Board Type */
+	.UserBd = BOARD_TYPE_MOBILE,
+};
+
+const struct mb_cfg *variant_memcfg_config(void)
+{
+	return &mc_ehl_lpddr4x_memcfg_cfg;
+}