summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/google/rex/Kconfig2
-rw-r--r--src/mainboard/google/rex/variants/screebo/overridetree.cb344
2 files changed, 343 insertions, 3 deletions
diff --git a/src/mainboard/google/rex/Kconfig b/src/mainboard/google/rex/Kconfig
index 528a2dc2c4..6aca9e3557 100644
--- a/src/mainboard/google/rex/Kconfig
+++ b/src/mainboard/google/rex/Kconfig
@@ -109,7 +109,7 @@ config OVERRIDE_DEVICETREE
config DRIVER_TPM_I2C_BUS
hex
- default 0x4 if BOARD_GOOGLE_REX0
+ default 0x4 if BOARD_GOOGLE_REX0 || BOARD_GOOGLE_SCREEBO
config DRIVER_TPM_I2C_ADDR
hex
diff --git a/src/mainboard/google/rex/variants/screebo/overridetree.cb b/src/mainboard/google/rex/variants/screebo/overridetree.cb
index 6c284b305b..9e3f9f6511 100644
--- a/src/mainboard/google/rex/variants/screebo/overridetree.cb
+++ b/src/mainboard/google/rex/variants/screebo/overridetree.cb
@@ -1,6 +1,346 @@
chip soc/intel/meteorlake
- device domain 0 on
- end
+ register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC1)" # USB2_C1
+ register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # USB2_C0
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A Port A1
+ register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # Type-A Port A0
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port A0
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # USB3/2 Type A port A1
+
+ register "tcss_ports[1]" = "TCSS_PORT_DEFAULT(OC0)"
+ register "tcss_ports[3]" = "TCSS_PORT_DEFAULT(OC1)"
+
+ # Enable eDP in Port A
+ register "ddi_port_A_config" = "1"
+ # Enable HDMI in Port B
+ register "ddi_port_B_config" = "0"
+
+ # Enable Display Port Configuration
+ register "ddi_ports_config" = "{
+ [DDI_PORT_A] = DDI_ENABLE_HPD,
+ [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
+ [DDI_PORT_1] = DDI_ENABLE_HPD,
+ [DDI_PORT_2] = DDI_ENABLE_HPD,
+ [DDI_PORT_3] = DDI_ENABLE_HPD,
+ [DDI_PORT_4] = DDI_ENABLE_HPD,
+ }"
+
+ register "serial_io_gspi_mode" = "{
+ [PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
+ [PchSerialIoIndexGSPI1] = PchSerialIoPci,
+ [PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
+ }"
+
+ register "serial_io_i2c_mode" = "{
+ [PchSerialIoIndexI2C0] = PchSerialIoPci,
+ [PchSerialIoIndexI2C1] = PchSerialIoPci,
+ [PchSerialIoIndexI2C2] = PchSerialIoDisabled,
+ [PchSerialIoIndexI2C3] = PchSerialIoPci,
+ [PchSerialIoIndexI2C4] = PchSerialIoPci,
+ [PchSerialIoIndexI2C5] = PchSerialIoPci,
+ }"
+
+ # Intel Common SoC Config
+ #+-------------------+---------------------------+
+ #| Field | Value |
+ #+-------------------+---------------------------+
+ #| I2C0 | Audio |
+ #| I2C1 | Touchscreen |
+ #| I2C3 | Touchpad |
+ #| I2C4 | cr50 TPM. Early init is |
+ #| | required to set up a BAR |
+ #| | for TPM communication |
+ #| I2C5 | UFC |
+ #+-------------------+---------------------------+
+ register "common_soc_config" = "{
+ .i2c[0] = {
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 650,
+ .fall_time_ns = 400,
+ .data_hold_time_ns = 50,
+ },
+ .i2c[1] = {
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 650,
+ .fall_time_ns = 400,
+ .data_hold_time_ns = 50,
+ },
+ .i2c[3] = {
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 650,
+ .fall_time_ns = 400,
+ .data_hold_time_ns = 50,
+ },
+ .i2c[4] = {
+ .early_init = 1,
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 600,
+ .fall_time_ns = 400,
+ .data_hold_time_ns = 50,
+ },
+ .i2c[5] = {
+ .speed = I2C_SPEED_FAST,
+ .rise_time_ns = 900,
+ .fall_time_ns = 400,
+ .data_hold_time_ns = 50,
+ },
+ }"
+
+ device domain 0 on
+ device ref dtt on
+ chip drivers/intel/dptf
+ ## sensor information
+ register "options.tsr[0].desc" = ""DDR_SOC""
+ register "options.tsr[1].desc" = ""Ambient""
+ register "options.tsr[2].desc" = ""Charger""
+
+ ## Active Policy
+ # FIXME: below values are initial reference values only
+ register "policies.active" = "{
+ [0] = {
+ .target = DPTF_TEMP_SENSOR_0,
+ .thresholds = {
+ TEMP_PCT(75, 90),
+ TEMP_PCT(70, 80),
+ TEMP_PCT(65, 70),
+ TEMP_PCT(60, 60),
+ TEMP_PCT(55, 50),
+ TEMP_PCT(50, 40),
+ TEMP_PCT(45, 30),
+ }
+ },
+ [1] = {
+ .target = DPTF_TEMP_SENSOR_1,
+ .thresholds = {
+ TEMP_PCT(75, 90),
+ TEMP_PCT(70, 80),
+ TEMP_PCT(65, 70),
+ TEMP_PCT(60, 60),
+ TEMP_PCT(55, 50),
+ TEMP_PCT(50, 40),
+ TEMP_PCT(45, 30),
+ }
+ },
+ [2] = {
+ .target = DPTF_TEMP_SENSOR_2,
+ .thresholds = {
+ TEMP_PCT(75, 90),
+ TEMP_PCT(70, 80),
+ TEMP_PCT(65, 70),
+ TEMP_PCT(60, 50),
+ }
+ }
+ }"
+
+ ## Passive Policy
+ # TODO: below values are initial reference values only
+ register "policies.passive" = "{
+ [0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
+ [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 5000),
+ [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 80, 5000),
+ [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000),
+ }"
+
+ ## Critical Policy
+ # TODO: below values are initial reference values only
+ register "policies.critical" = "{
+ [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
+ [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
+ [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
+ [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
+ }"
+
+ ## Power Limits Control
+ register "controls.power_limits" = "{
+ .pl1 = {
+ .min_power = 15000,
+ .max_power = 15000,
+ .time_window_min = 28 * MSECS_PER_SEC,
+ .time_window_max = 32 * MSECS_PER_SEC,
+ .granularity = 200,
+ },
+ .pl2 = {
+ .min_power = 57000,
+ .max_power = 57000,
+ .time_window_min = 28 * MSECS_PER_SEC,
+ .time_window_max = 32 * MSECS_PER_SEC,
+ .granularity = 1000,
+ }
+ }"
+
+ ## Charger Performance Control (Control, mA)
+ register "controls.charger_perf" = "{
+ [0] = { 255, 3000 },
+ [1] = { 24, 1500 },
+ [2] = { 16, 1000 },
+ [3] = { 8, 500 }
+ }"
+
+ ## Fan Performance Control (Percent, Speed, Noise, Power)
+ register "controls.fan_perf" = "{
+ [0] = { 90, 6700, 220, 2200, },
+ [1] = { 80, 5800, 180, 1800, },
+ [2] = { 70, 5000, 145, 1450, },
+ [3] = { 60, 4900, 115, 1150, },
+ [4] = { 50, 3838, 90, 900, },
+ [5] = { 40, 2904, 55, 550, },
+ [6] = { 30, 2337, 30, 300, },
+ [7] = { 20, 1608, 15, 150, },
+ [8] = { 10, 800, 10, 100, },
+ [9] = { 0, 0, 0, 50, }
+ }"
+
+ ## Fan options
+ register "options.fan.fine_grained_control" = "1"
+ register "options.fan.step_size" = "2"
+
+ device generic 0 alias dptf_policy on end
+ end
+ end
+ device ref pcie_rp9 on
+ # Enable SSD Card PCIE 9 using clk 4
+ register "pcie_rp[PCH_RP(9)]" = "{
+ .clk_src = 4,
+ .clk_req = 4,
+ .flags = PCIE_RP_LTR | PCIE_RP_AER,
+ }"
+ end # PCIE4_P9 SSD card
+ device ref pcie_rp10 on
+ # Enable SD Card PCIE4 rp10 using clk 7
+ register "pcie_rp[PCH_RP(10)]" = "{
+ .clk_src = 7,
+ .clk_req = 7,
+ .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER,
+ }"
+ chip soc/intel/common/block/pcie/rtd3
+ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D03)"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D02)"
+ register "srcclk_pin" = "7"
+ device generic 0 on end
+ end
+ end
+ device ref tbt_pcie_rp0 on end
+ device ref tbt_pcie_rp2 on end
+ device ref tcss_xhci on
+ chip drivers/usb/acpi
+ device ref tcss_root_hub on
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-C Port C0 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 1))"
+ device ref tcss_usb3_port2 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-C Port C1 (DB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))"
+ device ref tcss_usb3_port4 on end
+ end
+ end
+ end
+ end
+ device ref tcss_dma0 on
+ chip drivers/intel/usb4/retimer
+ register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)"
+ use tcss_usb3_port2 as dfp[0].typec_port
+ device generic 0 on end
+ end
+ end
+ device ref tcss_dma1 on
+ chip drivers/intel/usb4/retimer
+ register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B22)"
+ use tcss_usb3_port4 as dfp[0].typec_port
+ device generic 0 on end
+ end
+ end
+ device ref xhci on
+ chip drivers/usb/acpi
+ device ref xhci_root_hub on
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-C Port C1 (DB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))"
+ device ref usb2_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-C Port C0 (MLB)""
+ register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 1))"
+ device ref usb2_port2 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Port A1 (MLB)""
+ register "type" = "UPC_TYPE_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))"
+ device ref usb2_port3 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB2 Type-A Port A0 (MLB)""
+ register "type" = "UPC_TYPE_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))"
+ device ref usb2_port9 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Port A0 (MLB)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, CENTER, ACPI_PLD_GROUP(3, 1))"
+ device ref usb3_port1 on end
+ end
+ chip drivers/usb/acpi
+ register "desc" = ""USB3 Type-A Port A1 (MLB)""
+ register "type" = "UPC_TYPE_USB3_A"
+ register "use_custom_pld" = "true"
+ register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(4, 1))"
+ device ref usb3_port2 on end
+ end
+ end
+ end
+ end
+ device ref cnvi_wifi on
+ chip drivers/wifi/generic
+ register "wake" = "GPE0_PME_B0"
+ register "add_acpi_dma_property" = "true"
+ register "enable_cnvi_ddr_rfim" = "true"
+ device generic 0 on end
+ end
+ end
+ device ref i2c4 on
+ chip drivers/i2c/tpm
+ register "hid" = ""GOOG0005""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E03_IRQ)"
+ device i2c 50 on end
+ end
+ end
+ device ref soc_espi on
+ chip ec/google/chromeec
+ use conn0 as mux_conn[0]
+ use conn1 as mux_conn[1]
+ device pnp 0c09.0 on end
+ end
+ end
+ device ref pmc hidden
+ chip drivers/intel/pmc_mux
+ device generic 0 on
+ chip drivers/intel/pmc_mux/conn
+ use usb2_port2 as usb2_port
+ use tcss_usb3_port2 as usb3_port
+ device generic 0 alias conn0 on end
+ end
+ chip drivers/intel/pmc_mux/conn
+ use usb2_port1 as usb2_port
+ use tcss_usb3_port4 as usb3_port
+ device generic 1 alias conn1 on end
+ end
+ end
+ end
+ end
+ end
end