summaryrefslogtreecommitdiff
path: root/src/soc/amd/stoneyridge/include/soc/southbridge.h
blob: 69210b78c1289215e22956fcf2a723ce2af09c10 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */

#ifndef __STONEYRIDGE_H__
#define __STONEYRIDGE_H__

#include <types.h>
#include <device/device.h>
#include <device/pci_def.h>
#include <soc/iomap.h>
#include "chip.h"

/*
 * AcpiMmio Region
 *  - fixed addresses offset from 0xfed80000
 */

/* Power management registers:  0xfed80300 or index/data at IO 0xcd6/cd7 */
#define PM_DECODE_EN			0x00
#define   CF9_IO_EN			BIT(1)
#define   LEGACY_IO_EN			BIT(0)
#define PM_ISA_CONTROL			0x04
#define   MMIO_EN			BIT(1)
#define PM_PCI_CTRL			0x08
#define   FORCE_SLPSTATE_RETRY		BIT(25)
#define   FORCE_STPCLK_RETRY		BIT(24)

#define SMB_ASF_IO_BASE			0x01 /* part of PM_DECODE_EN */

#define PWR_RESET_CFG			0x10
#define   TOGGLE_ALL_PWR_GOOD		BIT(1)

#define PM_SERIRQ_CONF			0x54
#define   PM_SERIRQ_NUM_BITS_17		0x0000
#define   PM_SERIRQ_NUM_BITS_18		0x0004
#define   PM_SERIRQ_NUM_BITS_19		0x0008
#define   PM_SERIRQ_NUM_BITS_20		0x000c
#define   PM_SERIRQ_NUM_BITS_21		0x0010
#define   PM_SERIRQ_NUM_BITS_22		0x0014
#define   PM_SERIRQ_NUM_BITS_23		0x0018
#define   PM_SERIRQ_NUM_BITS_24		0x001c
#define   PM_SERIRQ_MODE		BIT(6)
#define   PM_SERIRQ_ENABLE		BIT(7)

#define PM_RTC_SHADOW			0x5b	/* state when power resumes */
#define   PM_S5_AT_POWER_RECOVERY	0x04	/* S5 */
#define   PM_RESTORE_S0_IF_PREV_S0	0x07	/* S0 if previously at S0 */

#define PM_EVT_BLK			0x60
#define   WAK_STS			BIT(15) /*AcpiPmEvtBlkx00 Pm1Status */
#define   PCIEXPWAK_STS			BIT(14)
#define   RTC_STS			BIT(10)
#define   PWRBTN_STS			BIT(8)
#define   GBL_STS			BIT(5)
#define   BM_STS			BIT(4)
#define   TIMER_STS			BIT(0)
#define   PCIEXPWAK_DIS			BIT(14) /*AcpiPmEvtBlkx02 Pm1Enable */
#define   RTC_EN			BIT(10)
#define   PWRBTN_EN			BIT(8)
#define   GBL_EN			BIT(5)
#define   TIMER_STS			BIT(0)
#define PM1_CNT_BLK			0x62
#define PM_TMR_BLK			0x64
#define PM_CPU_CTRL			0x66
#define PM_GPE0_BLK			0x68
#define PM_ACPI_SMI_CMD			0x6a
#define PM_ACPI_CONF			0x74
#define   PM_ACPI_DECODE_STD		BIT(0)
#define   PM_ACPI_GLOBAL_EN		BIT(1)
#define   PM_ACPI_RTC_EN_EN		BIT(2)
#define   PM_ACPI_TIMER_EN_EN		BIT(4)
#define   PM_ACPI_MASK_ARB_DIS		BIT(6)
#define   PM_ACPI_BIOS_RLS		BIT(7)
#define   PM_ACPI_PWRBTNEN_EN		BIT(8)
#define   PM_ACPI_REDUCED_HW_EN		BIT(9)
#define   PM_ACPI_BLOCK_PCIE_PME	BIT(24)
#define   PM_ACPI_PCIE_WAK_MASK		BIT(25)
#define   PM_ACPI_WAKE_AS_GEVENT	BIT(27)
#define   PM_ACPI_NB_PME_GEVENT		BIT(28)
#define   PM_ACPI_RTC_WAKE_EN		BIT(29)
#define PM_RST_CTRL1			0xbe
#define   SLPTYPE_CONTROL_EN		BIT(5)
#define PM_RST_STATUS			0xc0
#define PM_PCIB_CFG			0xea
#define   PM_GENINT_DISABLE		BIT(0)
#define PM_LPC_GATING			0xec
#define   PM_LPC_AB_NO_BYPASS_EN	BIT(2)
#define   PM_LPC_A20_EN			BIT(1)
#define   PM_LPC_ENABLE			BIT(0)
#define PM_USB_ENABLE			0xef
#define   PM_USB_ALL_CONTROLLERS	0x7f

/* SMBUS MMIO offsets 0xfed80a00 */
#define SMBHSTSTAT			0x0
#define   SMBHST_STAT_FAILED		0x10
#define   SMBHST_STAT_COLLISION		0x08
#define   SMBHST_STAT_ERROR		0x04
#define   SMBHST_STAT_INTERRUPT		0x02
#define   SMBHST_STAT_BUSY		0x01
#define   SMBHST_STAT_CLEAR		0xff
#define   SMBHST_STAT_NOERROR		0x02
#define   SMBHST_STAT_VAL_BITS		0x1f
#define   SMBHST_STAT_ERROR_BITS	0x1c

#define SMBSLVSTAT			0x1
#define   SMBSLV_STAT_ALERT		0x20
#define   SMBSLV_STAT_SHADOW2		0x10
#define   SMBSLV_STAT_SHADOW1		0x08
#define   SMBSLV_STAT_SLV_STS		0x04
#define   SMBSLV_STAT_SLV_INIT		0x02
#define   SMBSLV_STAT_SLV_BUSY		0x01
#define   SMBSLV_STAT_CLEAR		0x1f

#define SMBHSTCTRL			0x2
#define   SMBHST_CTRL_RST		0x80
#define   SMBHST_CTRL_STRT		0x40
#define   SMBHST_CTRL_QCK_RW		0x00
#define   SMBHST_CTRL_BTE_RW		0x04
#define   SMBHST_CTRL_BDT_RW		0x08
#define   SMBHST_CTRL_WDT_RW		0x0c
#define   SMBHST_CTRL_BLK_RW		0x14
#define   SMBHST_CTRL_MODE_BITS		0x1c
#define   SMBHST_CTRL_KILL		0x02
#define   SMBHST_CTRL_IEN		0x01

#define SMBHSTCMD			0x3
#define SMBHSTADDR			0x4
#define SMBHSTDAT0			0x5
#define SMBHSTDAT1			0x6
#define SMBHSTBLKDAT			0x7
#define SMBSLVCTRL			0x8
#define SMBSLVCMD_SHADOW		0x9
#define SMBSLVEVT			0xa
#define SMBSLVDAT			0xc
#define SMBTIMING			0xe

/* FCH MISC Registers 0xfed80e00 */
#define GPP_CLK_CNTRL			0x00
#define   GPP_CLK2_REQ_MAP_SHIFT	8
#define   GPP_CLK2_REQ_MAP_MASK		(0xf << GPP_CLK2_REQ_MAP_SHIFT)
#define   GPP_CLK2_REQ_MAP_CLK_REQ2	3
#define   GPP_CLK0_REQ_MAP_SHIFT	0
#define   GPP_CLK0_REQ_MAP_MASK		(0xf << GPP_CLK0_REQ_MAP_SHIFT)
#define   GPP_CLK0_REQ_MAP_CLK_REQ0	1
#define MISC_CGPLL_CONFIG1		0x08
#define   CG1PLL_SPREAD_SPECTRUM_ENABLE	BIT(0)
#define MISC_CGPLL_CONFIG3		0x10
#define   CG1PLL_REFDIV_SHIFT		0
#define   CG1PLL_REFDIV_MASK		(0x3ff << CG1PLL_REFDIV_SHIFT)
#define   CG1PLL_FBDIV_SHIFT		10
#define   CG1PLL_FBDIV_MASK		(0xfff << CG1PLL_FBDIV_SHIFT)
#define MISC_CGPLL_CONFIG4		0x14
#define   SS_STEP_SIZE_DSFRAC_SHIFT	0
#define   SS_STEP_SIZE_DSFRAC_MASK	(0xffff << SS_STEP_SIZE_DSFRAC_SHIFT)
#define   SS_AMOUNT_DSFRAC_SHIFT	16
#define   SS_AMOUNT_DSFRAC_MASK		(0xffff << SS_AMOUNT_DSFRAC_SHIFT)
#define MISC_CGPLL_CONFIG5		0x18
#define   SS_AMOUNT_NFRAC_SLIP_SHIFT	8
#define   SS_AMOUNT_NFRAC_SLIP_MASK	(0xf << SS_AMOUNT_NFRAC_SLIP_SHIFT)
#define MISC_CGPLL_CONFIG6		0x1c
#define   CG1PLL_LF_MODE_SHIFT		9
#define   CG1PLL_LF_MODE_MASK		(0x1ff << CG1PLL_LF_MODE_SHIFT)
#define MISC_CLK_CNTL1			0x40
#define   CG1PLL_FBDIV_TEST		BIT(26)
#define   OSCOUT1_CLK_OUTPUT_ENB	BIT(2)  /* 0 = Enabled, 1 = Disabled */
#define   OSCOUT2_CLK_OUTPUT_ENB	BIT(7)  /* 0 = Enabled, 1 = Disabled */

/* XHCI_PM Registers:  0xfed81c00 */
#define XHCI_PM_INDIRECT_INDEX		0x48
#define XHCI_PM_INDIRECT_DATA		0x4c
#define   XHCI_OVER_CURRENT_CONTROL	0x30
#define     USB_OC0			0
#define     USB_OC1			1
#define     USB_OC2			2
#define     USB_OC3			3
#define     USB_OC4			4
#define     USB_OC5			5
#define     USB_OC6			6
#define     USB_OC7			7
#define     USB_OC_DISABLE		0xf
#define     USB_OC_DISABLE_ALL		0xffff
#define     OC_PORT0_SHIFT		0
#define     OC_PORT1_SHIFT		4
#define     OC_PORT2_SHIFT		8
#define     OC_PORT3_SHIFT		12

#define EHCI_OVER_CURRENT_CONTROL	0x70
#define EHCI_HUB_CONFIG4		0x90
#define   DEBUG_PORT_SELECT_SHIFT	  16
#define   DEBUG_PORT_ENABLE		  BIT(18)
#define   DEBUG_PORT_MASK		(BIT(16) | BIT(17) | BIT(18))

/* FCH AOAC Registers 0xfed81e00 */
#define FCH_AOAC_D3_CONTROL_CLK_GEN	0x40
#define FCH_AOAC_D3_CONTROL_I2C0	0x4a
#define FCH_AOAC_D3_CONTROL_I2C1	0x4c
#define FCH_AOAC_D3_CONTROL_I2C2	0x4e
#define FCH_AOAC_D3_CONTROL_I2C3	0x50
#define FCH_AOAC_D3_CONTROL_UART0	0x56
#define FCH_AOAC_D3_CONTROL_UART1	0x58
#define FCH_AOAC_D3_CONTROL_AMBA	0x62
#define FCH_AOAC_D3_CONTROL_USB2	0x64
#define FCH_AOAC_D3_CONTROL_USB3	0x6e
/* Bit definitions for all FCH_AOAC_D3_CONTROL_* Registers */
#define   FCH_AOAC_TARGET_DEVICE_STATE (BIT(0) + BIT(1))
#define   FCH_AOAC_DEVICE_STATE		BIT(2)
#define   FCH_AOAC_PWR_ON_DEV		BIT(3)
#define   FCH_AOAC_SW_PWR_ON_RSTB	BIT(4)
#define   FCH_AOAC_SW_REF_CLK_OK	BIT(5)
#define   FCH_AOAC_SW_RST_B		BIT(6)
#define   FCH_AOAC_IS_SW_CONTROL	BIT(7)

#define FCH_AOAC_D3_STATE_CLK_GEN	0x41
#define FCH_AOAC_D3_STATE_I2C0		0x4b
#define FCH_AOAC_D3_STATE_I2C1		0x4d
#define FCH_AOAC_D3_STATE_I2C2		0x4f
#define FCH_AOAC_D3_STATE_I2C3		0x51
#define FCH_AOAC_D3_STATE_UART0		0x57
#define FCH_AOAC_D3_STATE_UART1		0x59
#define FCH_AOAC_D3_STATE_AMBA		0x63
#define FCH_AOAC_D3_STATE_USB2		0x65
#define FCH_AOAC_D3_STATE_USB3		0x6f
/* Bit definitions for all FCH_AOAC_D3_STATE_* Registers */
#define   FCH_AOAC_PWR_RST_STATE	BIT(0)
#define   FCH_AOAC_RST_CLK_OK_STATE	BIT(1)
#define   FCH_AOAC_RST_B_STATE		BIT(2)
#define   FCH_AOAC_DEV_OFF_GATING_STATE	BIT(3)
#define   FCH_AOAC_D3COLD		BIT(4)
#define   FCH_AOAC_CLK_OK_STATE		BIT(5)
#define   FCH_AOAC_STAT0		BIT(6)
#define   FCH_AOAC_STAT1		BIT(7)

#define PM1_LIMIT			16
#define GPE0_LIMIT			28
#define TOTAL_BITS(a)			(8 * sizeof(a))

/* SATA Controller D11F0 */
#define SATA_MISC_CONTROL_REG		0x40
#define SATA_MISC_SUBCLASS_WREN		BIT(0)
/* Register in AHCIBaseAddress (BAR5 at D11F0x24) */
#define SATA_CAPABILITIES_REG		0xfc
#define SATA_CAPABILITY_SPM		BIT(12)

#define SPI_CNTRL0			0x00
#define   SPI_BUSY			BIT(31)
#define   SPI_READ_MODE_MASK		(BIT(30) | BIT(29) | BIT(18))
/* Nominal is 16.7MHz on older devices, 33MHz on newer */
#define   SPI_READ_MODE_NOM		0x00000000
#define   SPI_READ_MODE_DUAL112		(          BIT(29)          )
#define   SPI_READ_MODE_QUAD114		(          BIT(29) | BIT(18))
#define   SPI_READ_MODE_DUAL122		(BIT(30)                    )
#define   SPI_READ_MODE_QUAD144		(BIT(30) |           BIT(18))
#define   SPI_READ_MODE_NORMAL66	(BIT(30) | BIT(29)          )
#define   SPI_READ_MODE_FAST		(BIT(30) | BIT(29) | BIT(18))
#define   SPI_ACCESS_MAC_ROM_EN		BIT(22)
#define   SPI_FIFO_PTR_CLR		BIT(20)
#define   SPI_ARB_ENABLE		BIT(19)
#define   EXEC_OPCODE			BIT(16)
#define SPI_FIFO			0x80
#define   SPI_FIFO_DEPTH		(0xc7 - SPI_FIFO)

#define SPI100_ENABLE			0x20
#define   SPI_USE_SPI100		BIT(0)

/* Use SPI_SPEED_16M-SPI_SPEED_66M below for the southbridge */
#define SPI100_SPEED_CONFIG		0x22
#define   SPI_SPEED_66M			(0x0)
#define   SPI_SPEED_33M			(                  BIT(0))
#define   SPI_SPEED_22M			(         BIT(1)         )
#define   SPI_SPEED_16M			(         BIT(1) | BIT(0))
#define   SPI_SPEED_100M		(BIT(2)                  )
#define   SPI_SPEED_800K		(BIT(2) |          BIT(0))
#define   SPI_NORM_SPEED_NEW_SH		12
#define   SPI_FAST_SPEED_NEW_SH		8
#define   SPI_ALT_SPEED_NEW_SH		4
#define   SPI_TPM_SPEED_NEW_SH		0

#define SPI100_HOST_PREF_CONFIG		0x2c
#define   SPI_RD4DW_EN_HOST		BIT(15)

/* Platform Security Processor D8F0 */
void soc_enable_psp_early(void);

#define PSP_MAILBOX_BAR			PCI_BASE_ADDRESS_4 /* BKDG: "BAR3" */
#define PSP_MAILBOX_OFFSET		0x70 /* offset from BAR3 value */

#define PSP_BAR_ENABLES			0x48
#define  PSP_MAILBOX_BAR_EN		0x10

#define MSR_CU_CBBCFG			0xc00110a2 /* PSP Pvt Blk Base Addr */
#define   BAR3HIDE			BIT(12) /* Bit to hide BAR3 addr */

/* IO 0xcf9 - Reset control port*/
#define   FULL_RST			BIT(3)
#define   RST_CMD			BIT(2)
#define   SYS_RST			BIT(1)

struct stoneyridge_aoac {
	int enable;
	int status;
};

typedef struct aoac_devs {
	unsigned int :5;
	unsigned int ic0e:1; /* 5: I2C0 */
	unsigned int ic1e:1; /* 6: I2C1 */
	unsigned int ic2e:1; /* 7: I2C2 */
	unsigned int ic3e:1; /* 8: I2C3 */
	unsigned int :2;
	unsigned int ut0e:1; /* 11: UART0 */
	unsigned int ut1e:1; /* 12: UART1 */
	unsigned int :2;
	unsigned int st_e:1; /* 15: SATA */
	unsigned int :2;
	unsigned int ehce:1; /* 18: EHCI */
	unsigned int :4;
	unsigned int xhce:1; /* 23: xHCI */
	unsigned int sd_e:1; /* 24: SDIO */
	unsigned int :2;
	unsigned int espi:1; /* 27: ESPI */
	unsigned int :4;
} __packed aoac_devs_t;

struct soc_power_reg {
	uint16_t pm1_sts;
	uint16_t pm1_en;
	uint32_t gpe0_sts;
	uint32_t gpe0_en;
	uint16_t wake_from;
};

#define XHCI_FW_SIG_OFFSET			0xc
#define XHCI_FW_ADDR_OFFSET			0x6
#define XHCI_FW_SIZE_OFFSET			0x8
#define XHCI_FW_BOOTRAM_SIZE			0x8000

void enable_aoac_devices(void);
void sb_clk_output_48Mhz(u32 osc);
void sb_disable_4dw_burst(void);
void sb_enable(struct device *dev);
void southbridge_final(void *chip_info);
void southbridge_init(void *chip_info);
void sb_read_mode(u32 mode);
void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm);
void bootblock_fch_early_init(void);
void bootblock_fch_init(void);

/*
 * Call the mainboard to get the USB Over Current Map. The mainboard
 * returns the map and 0 on Success or -1 on error or no map. There is
 * a default weak function in usb.c if the mainboard doesn't have any
 * over current support.
 */
int mainboard_get_xhci_oc_map(uint16_t *usb_oc_map);
int mainboard_get_ehci_oc_map(uint16_t *usb_oc_map);

/* Initialize all the i2c buses that are marked with early init. */
void i2c_soc_early_init(void);

/* Initialize all the i2c buses that are not marked with early init. */
void i2c_soc_init(void);

#endif /* __STONEYRIDGE_H__ */