diff options
Diffstat (limited to 'Lib/test/libregrtest/cmdline.py')
| -rw-r--r-- | Lib/test/libregrtest/cmdline.py | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/Lib/test/libregrtest/cmdline.py b/Lib/test/libregrtest/cmdline.py new file mode 100644 index 0000000000..d621f5f9f3 --- /dev/null +++ b/Lib/test/libregrtest/cmdline.py @@ -0,0 +1,347 @@ +import argparse +import os +import sys +from test import support + + +USAGE = """\ +python -m test [options] [test_name1 [test_name2 ...]] +python path/to/Lib/test/regrtest.py [options] [test_name1 [test_name2 ...]] +""" + +DESCRIPTION = """\ +Run Python regression tests. + +If no arguments or options are provided, finds all files matching +the pattern "test_*" in the Lib/test subdirectory and runs +them in alphabetical order (but see -M and -u, below, for exceptions). + +For more rigorous testing, it is useful to use the following +command line: + +python -E -Wd -m test [options] [test_name1 ...] +""" + +EPILOG = """\ +Additional option details: + +-r randomizes test execution order. You can use --randseed=int to provide an +int seed value for the randomizer; this is useful for reproducing troublesome +test orders. + +-s On the first invocation of regrtest using -s, the first test file found +or the first test file given on the command line is run, and the name of +the next test is recorded in a file named pynexttest. If run from the +Python build directory, pynexttest is located in the 'build' subdirectory, +otherwise it is located in tempfile.gettempdir(). On subsequent runs, +the test in pynexttest is run, and the next test is written to pynexttest. +When the last test has been run, pynexttest is deleted. In this way it +is possible to single step through the test files. This is useful when +doing memory analysis on the Python interpreter, which process tends to +consume too many resources to run the full regression test non-stop. + +-S is used to continue running tests after an aborted run. It will +maintain the order a standard run (ie, this assumes -r is not used). +This is useful after the tests have prematurely stopped for some external +reason and you want to start running from where you left off rather +than starting from the beginning. + +-f reads the names of tests from the file given as f's argument, one +or more test names per line. Whitespace is ignored. Blank lines and +lines beginning with '#' are ignored. This is especially useful for +whittling down failures involving interactions among tests. + +-L causes the leaks(1) command to be run just before exit if it exists. +leaks(1) is available on Mac OS X and presumably on some other +FreeBSD-derived systems. + +-R runs each test several times and examines sys.gettotalrefcount() to +see if the test appears to be leaking references. The argument should +be of the form stab:run:fname where 'stab' is the number of times the +test is run to let gettotalrefcount settle down, 'run' is the number +of times further it is run and 'fname' is the name of the file the +reports are written to. These parameters all have defaults (5, 4 and +"reflog.txt" respectively), and the minimal invocation is '-R :'. + +-M runs tests that require an exorbitant amount of memory. These tests +typically try to ascertain containers keep working when containing more than +2 billion objects, which only works on 64-bit systems. There are also some +tests that try to exhaust the address space of the process, which only makes +sense on 32-bit systems with at least 2Gb of memory. The passed-in memlimit, +which is a string in the form of '2.5Gb', determines howmuch memory the +tests will limit themselves to (but they may go slightly over.) The number +shouldn't be more memory than the machine has (including swap memory). You +should also keep in mind that swap memory is generally much, much slower +than RAM, and setting memlimit to all available RAM or higher will heavily +tax the machine. On the other hand, it is no use running these tests with a +limit of less than 2.5Gb, and many require more than 20Gb. Tests that expect +to use more than memlimit memory will be skipped. The big-memory tests +generally run very, very long. + +-u is used to specify which special resource intensive tests to run, +such as those requiring large file support or network connectivity. +The argument is a comma-separated list of words indicating the +resources to test. Currently only the following are defined: + + all - Enable all special resources. + + none - Disable all special resources (this is the default). + + audio - Tests that use the audio device. (There are known + cases of broken audio drivers that can crash Python or + even the Linux kernel.) + + curses - Tests that use curses and will modify the terminal's + state and output modes. + + largefile - It is okay to run some test that may create huge + files. These tests can take a long time and may + consume >2GB of disk space temporarily. + + network - It is okay to run tests that use external network + resource, e.g. testing SSL support for sockets. + + decimal - Test the decimal module against a large suite that + verifies compliance with standards. + + cpu - Used for certain CPU-heavy tests. + + subprocess Run all tests for the subprocess module. + + urlfetch - It is okay to download files required on testing. + + gui - Run tests that require a running GUI. + + tzdata - Run tests that require timezone data. + +To enable all resources except one, use '-uall,-<resource>'. For +example, to run all the tests except for the gui tests, give the +option '-uall,-gui'. +""" + + +RESOURCE_NAMES = ('audio', 'curses', 'largefile', 'network', + 'decimal', 'cpu', 'subprocess', 'urlfetch', 'gui', 'tzdata') + +class _ArgParser(argparse.ArgumentParser): + + def error(self, message): + super().error(message + "\nPass -h or --help for complete help.") + + +def _create_parser(): + # Set prog to prevent the uninformative "__main__.py" from displaying in + # error messages when using "python -m test ...". + parser = _ArgParser(prog='regrtest.py', + usage=USAGE, + description=DESCRIPTION, + epilog=EPILOG, + add_help=False, + formatter_class=argparse.RawDescriptionHelpFormatter) + + # Arguments with this clause added to its help are described further in + # the epilog's "Additional option details" section. + more_details = ' See the section at bottom for more details.' + + group = parser.add_argument_group('General options') + # We add help explicitly to control what argument group it renders under. + group.add_argument('-h', '--help', action='help', + help='show this help message and exit') + group.add_argument('--timeout', metavar='TIMEOUT', type=float, + help='dump the traceback and exit if a test takes ' + 'more than TIMEOUT seconds; disabled if TIMEOUT ' + 'is negative or equals to zero') + group.add_argument('--wait', action='store_true', + help='wait for user input, e.g., allow a debugger ' + 'to be attached') + group.add_argument('--slaveargs', metavar='ARGS') + group.add_argument('-S', '--start', metavar='START', + help='the name of the test at which to start.' + + more_details) + + group = parser.add_argument_group('Verbosity') + group.add_argument('-v', '--verbose', action='count', + help='run tests in verbose mode with output to stdout') + group.add_argument('-w', '--verbose2', action='store_true', + help='re-run failed tests in verbose mode') + group.add_argument('-W', '--verbose3', action='store_true', + help='display test output on failure') + group.add_argument('-q', '--quiet', action='store_true', + help='no output unless one or more tests fail') + group.add_argument('-o', '--slowest', action='store_true', dest='print_slow', + help='print the slowest 10 tests') + group.add_argument('--header', action='store_true', + help='print header with interpreter info') + + group = parser.add_argument_group('Selecting tests') + group.add_argument('-r', '--randomize', action='store_true', + help='randomize test execution order.' + more_details) + group.add_argument('--randseed', metavar='SEED', + dest='random_seed', type=int, + help='pass a random seed to reproduce a previous ' + 'random run') + group.add_argument('-f', '--fromfile', metavar='FILE', + help='read names of tests to run from a file.' + + more_details) + group.add_argument('-x', '--exclude', action='store_true', + help='arguments are tests to *exclude*') + group.add_argument('-s', '--single', action='store_true', + help='single step through a set of tests.' + + more_details) + group.add_argument('-m', '--match', metavar='PAT', + dest='match_tests', + help='match test cases and methods with glob pattern PAT') + group.add_argument('-G', '--failfast', action='store_true', + help='fail as soon as a test fails (only with -v or -W)') + group.add_argument('-u', '--use', metavar='RES1,RES2,...', + action='append', type=resources_list, + help='specify which special resource intensive tests ' + 'to run.' + more_details) + group.add_argument('-M', '--memlimit', metavar='LIMIT', + help='run very large memory-consuming tests.' + + more_details) + group.add_argument('--testdir', metavar='DIR', + type=relative_filename, + help='execute test files in the specified directory ' + '(instead of the Python stdlib test suite)') + + group = parser.add_argument_group('Special runs') + group.add_argument('-l', '--findleaks', action='store_true', + help='if GC is available detect tests that leak memory') + group.add_argument('-L', '--runleaks', action='store_true', + help='run the leaks(1) command just before exit.' + + more_details) + group.add_argument('-R', '--huntrleaks', metavar='RUNCOUNTS', + type=huntrleaks, + help='search for reference leaks (needs debug build, ' + 'very slow).' + more_details) + group.add_argument('-j', '--multiprocess', metavar='PROCESSES', + dest='use_mp', type=int, + help='run PROCESSES processes at once') + group.add_argument('-T', '--coverage', action='store_true', + dest='trace', + help='turn on code coverage tracing using the trace ' + 'module') + group.add_argument('-D', '--coverdir', metavar='DIR', + type=relative_filename, + help='directory where coverage files are put') + group.add_argument('-N', '--nocoverdir', + action='store_const', const=None, dest='coverdir', + help='put coverage files alongside modules') + group.add_argument('-t', '--threshold', metavar='THRESHOLD', + type=int, + help='call gc.set_threshold(THRESHOLD)') + group.add_argument('-n', '--nowindows', action='store_true', + help='suppress error message boxes on Windows') + group.add_argument('-F', '--forever', action='store_true', + help='run the specified tests in a loop, until an ' + 'error happens') + group.add_argument('--list-tests', action='store_true', + help="only write the name of tests that will be run, " + "don't execute them") + group.add_argument('-P', '--pgo', dest='pgo', action='store_true', + help='enable Profile Guided Optimization training') + + return parser + + +def relative_filename(string): + # CWD is replaced with a temporary dir before calling main(), so we + # join it with the saved CWD so it ends up where the user expects. + return os.path.join(support.SAVEDCWD, string) + + +def huntrleaks(string): + args = string.split(':') + if len(args) not in (2, 3): + raise argparse.ArgumentTypeError( + 'needs 2 or 3 colon-separated arguments') + nwarmup = int(args[0]) if args[0] else 5 + ntracked = int(args[1]) if args[1] else 4 + fname = args[2] if len(args) > 2 and args[2] else 'reflog.txt' + return nwarmup, ntracked, fname + + +def resources_list(string): + u = [x.lower() for x in string.split(',')] + for r in u: + if r == 'all' or r == 'none': + continue + if r[0] == '-': + r = r[1:] + if r not in RESOURCE_NAMES: + raise argparse.ArgumentTypeError('invalid resource: ' + r) + return u + + +def _parse_args(args, **kwargs): + # Defaults + ns = argparse.Namespace(testdir=None, verbose=0, quiet=False, + exclude=False, single=False, randomize=False, fromfile=None, + findleaks=False, use_resources=None, trace=False, coverdir='coverage', + runleaks=False, huntrleaks=False, verbose2=False, print_slow=False, + random_seed=None, use_mp=None, verbose3=False, forever=False, + header=False, failfast=False, match_tests=None, pgo=False) + for k, v in kwargs.items(): + if not hasattr(ns, k): + raise TypeError('%r is an invalid keyword argument ' + 'for this function' % k) + setattr(ns, k, v) + if ns.use_resources is None: + ns.use_resources = [] + + parser = _create_parser() + # Issue #14191: argparse doesn't support "intermixed" positional and + # optional arguments. Use parse_known_args() as workaround. + ns.args = parser.parse_known_args(args=args, namespace=ns)[1] + for arg in ns.args: + if arg.startswith('-'): + parser.error("unrecognized arguments: %s" % arg) + sys.exit(1) + + if ns.single and ns.fromfile: + parser.error("-s and -f don't go together!") + if ns.use_mp is not None and ns.trace: + parser.error("-T and -j don't go together!") + if ns.use_mp is not None and ns.findleaks: + parser.error("-l and -j don't go together!") + if ns.failfast and not (ns.verbose or ns.verbose3): + parser.error("-G/--failfast needs either -v or -W") + if ns.pgo and (ns.verbose or ns.verbose2 or ns.verbose3): + parser.error("--pgo/-v don't go together!") + + if ns.nowindows: + print("Warning: the --nowindows (-n) option is deprecated. " + "Use -vv to display assertions in stderr.", file=sys.stderr) + + if ns.quiet: + ns.verbose = 0 + if ns.timeout is not None: + if ns.timeout <= 0: + ns.timeout = None + if ns.use_mp is not None: + if ns.use_mp <= 0: + # Use all cores + extras for tests that like to sleep + ns.use_mp = 2 + (os.cpu_count() or 1) + if ns.use: + for a in ns.use: + for r in a: + if r == 'all': + ns.use_resources[:] = RESOURCE_NAMES + continue + if r == 'none': + del ns.use_resources[:] + continue + remove = False + if r[0] == '-': + remove = True + r = r[1:] + if remove: + if r in ns.use_resources: + ns.use_resources.remove(r) + elif r not in ns.use_resources: + ns.use_resources.append(r) + if ns.random_seed is not None: + ns.randomize = True + + return ns |