path: root/lib/megaco/doc/src/megaco_encode.xml

<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">

<chapter>
  <header>
    <copyright>
      <year>2000</year><year>2013</year>
      <holder>Ericsson AB. All Rights Reserved.</holder>
    </copyright>
    <legalnotice>
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at
 
          http://www.apache.org/licenses/LICENSE-2.0

      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
      See the License for the specific language governing permissions and
      limitations under the License.
    
    </legalnotice>

    <title>Internal form and its encodings</title>
    <prepared>H&aring;kan Mattsson</prepared>
    <responsible>H&aring;kan Mattsson</responsible>
    <docno></docno>
    <approved>H&aring;kan Mattsson</approved>
    <checked></checked>
    <date>2007-06-15</date>
    <rev>%VSN%</rev>
    <file>megaco_encode.xml</file>
  </header>
  <p>This version of the stack is compliant with: </p>
  <list type="bulleted">
    <item>
      <p>Megaco/H.248 version 1 (RFC3525)
        updated according to Implementors Guide version 10-13.</p>
    </item>
    <item>
      <p>Megaco/H.248 version 2 as defined by 
        draft-ietf-megaco-h248v2-04
        updated according to Implementors Guide version 10-13.</p>
    </item>
    <item>
      <p>Megaco/H.248 version 3 as defined by 
        ITU H.248.1 (09/2005).</p>
    </item>
  </list>

  <section>
    <title>Internal form of messages</title>
    <p>We use the same internal form for both the binary and text
      encoding.  Our internal form of Megaco/H.248 messages is heavily
      influenced by the internal format used by ASN.1
      encoders/decoders:</p>
    <list type="bulleted">
      <item>
        <p>"SEQUENCE OF" is represented as a list.</p>
      </item>
      <item>
        <p>"CHOICE" is represented as a tagged tuple with size 2.</p>
      </item>
      <item>
        <p>"SEQUENCE" is represented as a record, defined in
          "megaco/include/megaco_message_v1.hrl".</p>
      </item>
      <item>
        <p>"OPTIONAL" is represented as an ordinary field in a
          record which defaults to 'asn1_NOVALUE', meaning that the
          field has no value.</p>
      </item>
      <item>
        <p>"OCTET STRING" is represented as a list of unsigned integers.</p>
      </item>
      <item>
        <p>"ENUMERATED" is represented as a single atom.</p>
      </item>
      <item>
        <p>"BIT STRING" is represented as a list of atoms.</p>
      </item>
      <item>
        <p>"BOOLEAN" is represented as the atom 'true' or 'false'.</p>
      </item>
      <item>
        <p>"INTEGER" is represented as an integer.</p>
      </item>
      <item>
        <p>"IA5String" is represented as a list of integers,
          where each integer is the ASCII value of the corresponding
          character.</p>
      </item>
      <item>
        <p>"NULL" is represented as the atom 'NULL'.</p>
      </item>
    </list>
    <p>In order to fully understand the internal form you must get
      hold on a ASN.1 specification for the Megaco/H.248 protocol, 
      and apply the rules above.
      Please, see the documentation of the ASN.1 compiler in
      Erlang/OTP for more details of the semantics in mapping between
      ASN.1 and the corresponding internal form.</p>
    <p>Observe that the 'TerminationId' record is not used in the
      internal form. It has been replaced with a megaco_term_id record
      (defined in "megaco/include/megaco.hrl").</p>
  </section>

  <section>
    <title>The different encodings</title>
    <p>The Megaco/H.248 standard defines both a plain text encoding
      and a binary encoding (ASN.1 BER) and we have implemented
      encoders and decoders for both. We do in fact supply five
      different encoding/decoding modules.</p>
    <p>In the text encoding, implementors have the choice of using a
      mix of short and long keywords. It is also possible to add white
      spaces to improve readability. We use the term compact for text
      messages with the shortest possible keywords and no optional
      white spaces, and the term pretty for a well indented text
      format using long keywords and an indentation style like the
      text examples in the Megaco/H.248 specification).</p>
    <p>Here follows an example of a text message to give a feeling
      of the difference between the pretty and compact versions of
      text messages. First the pretty, well indented version with long
      keywords:</p>
    <pre>
   MEGACO/1 [124.124.124.222]
   Transaction = 9998 {
           Context = - {
                   ServiceChange = ROOT {
                           Services {
                                   Method = Restart,
                                   ServiceChangeAddress = 55555,
                                   Profile = ResGW/1,
                                   Reason = "901 Cold Boot"
                           }
                   }
           }
   }    </pre>
    <p>Then the compact version without indentation and with short keywords:</p>
    <pre>
 
   !/1 [124.124.124.222]
   T=9998{C=-{SC=ROOT{SV{MT=RS,AD=55555,PF=ResGW/1,RE="901 Cold Boot"}}}}    </pre>
    <p>And the programmers view of the same message.
      First a list of ActionRequest records are constructed and
      then it is sent with one of the send functions in the API:</p>
    <pre>
  Prof = #'ServiceChangeProfile'{profileName = "resgw", version = 1},
  Parm = #'ServiceChangeParm'{serviceChangeMethod  = restart,
                              serviceChangeAddress = {portNumber, 55555},
                              serviceChangeReason  = "901 Cold Boot",
                              serviceChangeProfile = Prof},
  Req = #'ServiceChangeRequest'{terminationID = [?megaco_root_termination_id],
                                serviceChangeParms = Parm},
  Actions = [#'ActionRequest'{contextId = ?megaco_null_context_id,
                              commandRequests = {serviceChangeReq, Req}}],
  megaco:call(ConnHandle, Actions, Config).    </pre>
    <p>And finally a print-out of the entire internal form:</p>
    <pre>
  {'MegacoMessage',
   asn1_NOVALUE,
   {'Message',
    1,
    {ip4Address,{'IP4Address', [124,124,124,222], asn1_NOVALUE}},
    {transactions,
     [
      {transactionRequest,
       {'TransactionRequest',
         9998,
         [{'ActionRequest',
           0,
           asn1_NOVALUE,
           asn1_NOVALUE,
           [
            {'CommandRequest',
             {serviceChangeReq,
              {'ServiceChangeRequest',
               [
                {megaco_term_id, false, ["root"]}],
                {'ServiceChangeParm',
                 restart,
                 {portNumber, 55555},
                 asn1_NOVALUE,
                 {'ServiceChangeProfile', "resgw", version = 1},
                 "901 MG Cold Boot",
                 asn1_NOVALUE,
                 asn1_NOVALUE,
                 asn1_NOVALUE
                }
              }
             },
             asn1_NOVALUE,
             asn1_NOVALUE
            }
           ]
          }
         ]
       }
      }
     ]
    }
   }
  }     </pre>
    <p>The following encoding modules are provided:
      </p>
    <list type="bulleted">
      <item>
        <p>megaco_pretty_text_encoder - encodes messages into
          pretty text format, decodes both pretty as well as compact
          text.</p>
      </item>
      <item>
        <p>megaco_compact_text_encoder - encodes messages into
          compact text format, decodes both pretty as well as compact
          text.</p>
      </item>
      <item>
        <p>megaco_binary_encoder - encode/decode ASN.1 BER messages.
          This encoder implements the fastest of the BER encoders/decoders.
          Recommended binary codec.</p>
      </item>
      <item>
        <p>megaco_ber_encoder - encode/decode ASN.1 BER 
          messages.</p>
      </item>
      <item>
        <p>megaco_per_encoder - encode/decode ASN.1 PER
          messages. N.B. that this format is not included in the
          Megaco standard.</p>
      </item>
      <item>
        <p>megaco_erl_dist_encoder - encodes messages into Erlangs
          distribution format. It is rather verbose but encoding and
          decoding is blinding fast. N.B. that this format is not 
          included in the Megaco standard.</p>
      </item>
    </list>
  </section>

  <section>
    <marker id="erl_dist_config"></marker>
    <title>Configuration of Erlang distribution encoding module</title>
    <p>The encoding_config of the megaco_erl_dist_encoder module
      may be one of these:</p>
    <list type="bulleted">
      <item>
        <p><c><![CDATA[[]]]></c> - Encodes the messages to the standard distribution
          format. It is rather verbose but encoding and decoding is
          blinding fast.</p>
      </item>
      <item>
        <p><c><![CDATA[[megaco_compressed]]]></c> - Encodes the messages to the
          standard distribution format after an internal transformation. 
          It is less verbose, but the total time of the encoding and 
          decoding will on the other hand be somewhat slower (see the 
          <seealso marker="megaco_performance">performance</seealso> 
          chapter for more info).</p>
      </item>
      <item>
        <p><c><![CDATA[[{megaco_compressed, Module}]]]></c> - Works in the same
          way as the megaco_compressed config parameter, only here the 
          user provide their own compress module. This module must 
          implement the 
          <seealso marker="megaco_edist_compress">megaco_edist_compress</seealso> 
          behaviour.</p>
      </item>
      <item>
        <p><c><![CDATA[[compressed]]]></c> - Encodes the messages to a compressed
          form of the standard distribution format. It is less
          verbose, but the encoding and decoding will on the other
          hand be slower.</p>
      </item>
    </list>
  </section>

  <section>
    <marker id="text_config"></marker>
    <title>Configuration of text encoding module(s)</title>
    <p>When using text encoding(s), there is actually two different
      configs controlling what software to use:</p>
    <list type="bulleted">
      <item>
        <p><c><![CDATA[[]]]></c> - An empty list indicates that the erlang
          scanner should be used.</p>
      </item>
      <item>
        <p><c><![CDATA[[{flex, port()}]]]></c> - Use the flex scanner when 
          decoding (not optimized for SMP). See 
          <seealso marker="megaco_run#initial_config">initial configuration</seealso> 
          for more info.</p>
      </item>
      <item>
        <p><c><![CDATA[[{flex, ports()}]]]></c> - Use the flex scanner when 
          decoding (optimized for SMP). See 
          <seealso marker="megaco_run#initial_config">initial configuration</seealso> 
          for more info.</p>
      </item>
    </list>
    <p>The Flex scanner is a Megaco scanner written as a linked in driver 
      (in C). There are two ways to get this working:</p>
    <list type="bulleted">
      <item>
        <p>Let the Megaco stack start the flex scanner 
          (load the driver).</p>
        <p>To make this happen the megaco stack has to be configured: </p>
        <list type="bulleted">
          <item>
            <p>Add the <c><![CDATA[{scanner, flex}]]></c> (or similar) directive to an 
              Erlang system config file for the megaco app (see 
              <seealso marker="megaco_run#initial_config">initial configuration</seealso> 
              chapter for details). </p>
          </item>
          <item>
            <p>Retrieve the encoding-config using the
              <seealso marker="megaco#system_info">system_info</seealso> 
              function (with <c>Item = text_config</c>). </p>
          </item>
          <item>
            <p>Update the receive handle with the encoding-config 
              (the <c>encoding_config</c> field). </p>
          </item>
        </list>
        <p>The benefit of this is that Megaco handles the starting, holding
          and the supervision of the driver and port.</p>
      </item>
      <item>
        <p>The Megaco client (user) starts the flex scanner (load the driver).</p>
        <p>When starting the flex scanner a port to the linked in driver is 
          created. This port has to be owned by a process. This process must not
          die. If it does the port will also terminate. Therefor:</p>
        <p></p>
        <list type="bulleted">
          <item>
            <p>Create a permanent process. Make sure this process is
              supervised (so that if it does die, this will be noticed).</p>
          </item>
          <item>
            <p>Let this process start the flex scanner by calling the 
              <c><![CDATA[megaco_flex_scanner:start/0,1]]></c> function.</p>
          </item>
          <item>
            <p>Retrieve the encoding-config and when initiating
              the <c><![CDATA[megaco_receive_handle]]></c>, set the 
              field <c>encoding_config</c> accordingly.</p>
          </item>
          <item>
            <p>Pass the <c><![CDATA[megaco_receive_handle]]></c> to the 
              transport module.</p>
          </item>
        </list>
      </item>
    </list>
  </section>

  <section>
    <marker id="binary_config"></marker>
    <title>Configuration of binary encoding module(s)</title>
    <p>When using binary encoding, the structure of the termination id's 
      needs to be specified.</p>
    <list type="bulleted">
      <item>
        <p><c><![CDATA[[native]]]></c> - skips the transformation phase, i.e. 
          the decoded message(s) will not be transformed into our internal
          form.</p>
      </item>
      <item>
        <p><c><![CDATA[[integer()]]]></c> - A list containing the size (the number 
          of bits) of each level. Example: <c><![CDATA[[3,8,5,8]]]></c>.</p>
      </item>
      <item>
        <p><c><![CDATA[integer()]]></c> - Number of one byte (8 bits) levels.
          N.B. This is currently converted into the previous config. 
          Example: <c><![CDATA[3]]></c> (<c><![CDATA[[8,8,8]]]></c>).</p>
      </item>
    </list>
  </section>

  <section>
    <marker id="handling_versions"></marker>
    <title>Handling megaco versions</title>
    <p>Since the version 3 implemented, in this version of the Megaco 
      application, is preliminary, it is necessary to have a way
      to handle different version 3 implementations. For this reason
      the encoding config option <c><![CDATA[{version3, version3()}]]></c> has been 
      introduced. This option, if present, has to be <em>first</em> in the 
      encoding config list. Version 1 and 2 codec's ignore this option, if 
      found. </p>
    <code type="none"><![CDATA[
version3() -> prev3a | prev3b | prev3c | v3    ]]></code>
    <list type="bulleted">
      <item>
        <p><em>prev3a</em></p>
        <p>Preliminary version 3, based on TD-33</p>
      </item>
      <item>
        <p><em>prev3b</em></p>
        <p>Preliminary version 3, based on TD-33, but text encoding 
          updated with the final solution for priority in 
          <c><![CDATA[contextProperty]]></c> (which is backward compatible with v2).</p>
      </item>
      <item>
        <p><em>prev3c</em></p>
        <p>Preliminary version 3, based on the final version of the 
          v3-standard, but <em>excluding</em> segments!</p>
      </item>
      <item>
        <p><em>v3</em></p>
        <p>Full version 3. Including segmentation. This is the default
          version 3 variant (i.e. if a version 3 messages is to be 
          encoded/decoded and no version3 encoding config is found, 
          then v3 is assumed).</p>
      </item>
    </list>
    <p>There are two ways to handle the different megaco encoding versions.
      Either using <em>dynamic version detection</em> (only valid for
      for incoming messages) or by <em>explicit version</em> setting in 
      the connection info.</p>
    <p>For incoming messages:</p>
    <list type="bulleted">
      <item>
        <p>Dynamic version detection</p>
        <p>Set the protocol version in the megaco_receive_handle to 
          <c><![CDATA[dynamic]]></c> (this is the default).
          <br></br>This works for those codecs that support partial decode of the 
          version, currently <em>text</em>, and ber_bin 
          (<c><![CDATA[megaco_binary_encoder]]></c> and <c><![CDATA[megaco_ber_bin_encoder]]></c>). 
          <br></br>This way the decoder will detect which version is used and 
          then use the proper decoder. </p>
      </item>
      <item>
        <p>Explicit version</p>
        <p>Explicitly set the actual protocol version in the 
          megaco_receive_handle.
          <br></br>Start with version 1. When the initial service change has been 
          performed and version 2 has been negotiated, upgrade the 
          megaco_receive_handle of the transport process (control_pid) to 
          version 2.
          See 
          <seealso marker="megaco_tcp#upgrade_receive_handle">megaco_tcp</seealso>
          and 
          <seealso marker="megaco_udp#upgrade_receive_handle">megaco_udp</seealso>.
          <br></br>Note that if <c><![CDATA[udp]]></c> is used, the same transport process 
          could be used for several connections. This could make upgrading 
          impossible.
          <br></br>For codecs that does not support partial decode of the version, 
          currently <c><![CDATA[megaco_ber_encoder]]></c>, <c><![CDATA[megaco_per_encoder]]></c>
          and <c><![CDATA[megaco_per_bin_encoder]]></c>, <c><![CDATA[dynamic]]></c> will revert to 
          version 1.</p>
      </item>
    </list>
    <p>For outgoing messages:</p>
    <list type="bulleted">
      <item>
        <p>Update the connection info protocol_version.</p>
      </item>
      <item>
        <p>Override protocol version when sending a message by adding the
          item <c><![CDATA[{protocol_version, integer()}]]></c> to the Options.
          See 
          <seealso marker="megaco#call">call</seealso> or
          <seealso marker="megaco#cast">cast</seealso>.
          <br></br>Note that this does not effect the messages that are sent
          autonomously by the stack. They use the protocol_version of the
          connection info.</p>
      </item>
    </list>
  </section>

  <section>
    <title>Encoder callback functions</title>
    <p>The encoder callback interface is defined by the <c><![CDATA[megaco_encoder]]></c> 
      behaviour, see <seealso marker="megaco_encoder">megaco_encoder</seealso>.</p>
  </section>
</chapter>