Add a bunch of new/tested stuff and various small changes 14.

Tested Mainboards:
OK:
 - ASUS M3A78-EH
   http://www.flashrom.org/pipermail/flashrom/2010-October/005297.html
 - ASUS P2B-LS
   http://www.flashrom.org/pipermail/flashrom/2010-November/005506.html
 - Biostar TA790GX A3+
   http://paste.flashrom.org/view.php?id=1350
 - ECS 848P-A7
   http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html
 - GIGABYTE GA-G41MT-S2PT
   Reported on IRC
 - GIGABYTE GA-H77-D3H
   Reported and tested by Alexander Gordeev on IRC.
 - Gigabyte GA-X79-UD5
   http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html
 - Shuttle FN78S
   http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html
 - VIA EITX-3000
   Reported on IRC by Tuju

NOT OK:
 - Dell PowerEdge C6220 (0HYFFG)
   http://www.flashrom.org/pipermail/flashrom/2012-September/009900.html
 - Foxconn Q45M
   http://www.flashrom.org/pipermail/flashrom/2012-September/009923.html
 - MSI MS-7309 (K9N6SGM-V)
   http://www.flashrom.org/pipermail/flashrom/2012-August/009712.html
 - Supermicro X9QRi-F+
   http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html
 - ZOTAC H61-ITX WiFi (H61ITX-A-E)
   http://www.flashrom.org/pipermail/flashrom/2012-August/009649.html

ASUS CUSL2-C has been tested to be working with the board enable once
implemented for the TUSL2-C board. They seem to have the same PCI IDs
as shown in the links below. Since only the CUSL2-C board enable has been
tested yet, we distinguish the two by DMI strings.
http://paste.flashrom.org/view.php?id=1393
http://www.flashrom.org/pipermail/flashrom/attachments/20091206/ddca2c6c/attachment-0002.eml

Tested flash chips:
 - Set EMST F25L008A to PREW (+PREW)
   http://www.flashrom.org/pipermail/flashrom/2012-August/009714.html
 - Set GigaDevice GD25Q64 to PREW (+PREW)
   http://git.chromium.org/gitweb/?p=chromiumos/third_party/flashrom.git;a=commit;h=9e8ef49b1f626c2197e131fba6c5b65c8af4eeea
 - Set Macronix MX25L12805 to P (+P)
   http://www.flashrom.org/pipermail/flashrom/2012-September/009887.html
 - Set SST SST49LF003A/B to PREW (+EW)
   http://paste.flashrom.org/view.php?id=467
 - Set Winbond W49V002FA to PREW (+EW)
   http://www.flashrom.org/pipermail/flashrom/2011-January/005781.html

Tested chipsets:
 - Intel X79 (0x1d41)
   http://www.flashrom.org/pipermail/flashrom/2012-August/009811.html

Board enables:
 - add ASUS P4P800-X
   Created by Idwer Vollering and tested by Mingsen Bao:
   http://paste.flashrom.org/view.php?id=467
 - add DMI string to P4P800-VM

Miscellaneous:
 - Add remaining Intel 7 series chipset (LPC) PCI IDs
 - Add generic SPI detection for chips from Winbond
 - Minor manpage changes
 - Minor other cleanups
 - Escape full stops after abbreviations in the manpage.
 - Add ICH9 and successors to spi_get_valid_read_addr

Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>

git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1601 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 15 insertions, 5 deletions

diff --git a/flash.h b/flash.h
index 2990202..4913536 100644
--- a/flash.h
+++ b/flash.h
@@ -59,6 +59,21 @@ enum chipbustype {
 };
 
 /*
+ * The following write granularities are known:
+ * - 1 bit: Each bit can be cleared individually.
+ * - 1 byte: A byte can be written once. Further writes to an already written byte cause its contents to be
+ *   either undefined or to stay unchanged.
+ * - 128 bytes: If less than 128 bytes are written, the rest will be erased. Each write to a 128-byte region
+ *   will trigger an automatic erase before anything is written. Very uncommon behaviour.
+ * - 256 bytes: If less than 256 bytes are written, the contents of the unwritten bytes are undefined.
+ */
+enum write_granularity {
+	write_gran_1bit,
+	write_gran_1byte,
+	write_gran_256bytes,
+};
+
+/*
  * How many different contiguous runs of erase blocks with one size each do
  * we have for a given erase function?
  */
@@ -203,11 +218,6 @@ void print_supported(void);
 void print_supported_wiki(void);
 
 /* flashrom.c */
-enum write_granularity {
-	write_gran_1bit,
-	write_gran_1byte,
-	write_gran_256bytes,
-};
 extern int verbose_screen;
 extern int verbose_logfile;
 extern const char flashrom_version[];