Add a bunch of new/tested stuff and various small changes 21.

Tested mainboards:
OK:
 - ASUS F2A85-M
   Reported by various corebooters
 - ASUS M2N-MX SE Plus
   Reported by Antonio
 - ASUS P5LD2
   Reported by François Revol
 - Lenovo ThinkPad T530
   Reported and partially authored by Edward O'Callaghan
 - MSI MS-7502 (Medion MD8833)
   Reported by naq on IRC
 - Shuttle AB61
   Reported by olofolleola4
 - ZOTAC IONITX-F-E
   Reported by Bernardo Kuri

Flash chips:
 - Atmel AT45DB021D to PREW (+PREW)
   Reported by The Raven
 - Atmel AT25F4096 to PREW (+PREW)
   Reported by 공준혁
 - GigaDevice GD25Q16(B) to PREW (+PREW)
   Reported by luxflow@live.com using a GD25Q16BSIG
 - Catalyst CAT28F512
   Mark erase and write as known bad (not implemented)

Miscellaneous:
 - Various spelling corrections by Daniele Forsi.
 - Added and refined a bunch of chips originally investigated by Carl-Daniel.
 - Marked the ARM-USB-OCD-H programmer as tested
   (reported by Ruud Schramp).
 - Tiny other stuff.

Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>

git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1839 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 7 insertions, 7 deletions

diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl
index 153591a..81eceaa 100644
--- a/flashrom.8.tmpl
+++ b/flashrom.8.tmpl
@@ -229,7 +229,7 @@ bitbanging adapter)
 .sp
 Some programmers have optional or mandatory parameters which are described
 in detail in the
-.B PROGRAMMER SPECIFIC INFO
+.B PROGRAMMER-SPECIFIC INFORMATION
 section. Support for some programmers can be disabled at compile time.
 .B "flashrom \-h"
 lists all supported programmers.
@@ -242,11 +242,11 @@ Save the full debug log to
 .BR <logfile> .
 If the file already exists, it will be overwritten. This is the recommended
 way to gather logs from flashrom because they will be verbose even if the
-on-screen messages are not verbose.
+on-screen messages are not verbose and don't require output redirection.
 .TP
 .B "\-R, \-\-version"
 Show version information and exit.
-.SH PROGRAMMER SPECIFIC INFO
+.SH PROGRAMMER-SPECIFIC INFORMATION
 Some programmer drivers accept further parameters to set programmer-specific
 parameters. These parameters are separated from the programmer name by a
 colon. While some programmers take arguments at fixed positions, other
@@ -474,7 +474,7 @@ like above. In this case you can use
 .sp
 .B "  flashrom \-p internal:laptop=this_is_not_a_laptop"
 .sp
-to tell flashrom (at your own risk) that it does not running on a laptop.
+to tell flashrom (at your own risk) that it is not running on a laptop.
 .SS
 .BR "dummy " programmer
 The dummy programmer operates on a buffer in memory only. It provides a safe
@@ -595,7 +595,7 @@ is an 8-bit hexadecimal value.
 .SS
 .BR "nic3com" , " nicrealtek" , " nicnatsemi" , " nicintel", " nicintel_eeprom"\
 , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii"\
-, " satamv" , " atahpt" ", " atavia " and " it8212 " programmers
+, " satamv" , " atahpt", " atavia " and " it8212 " programmers
 These programmers have an option to specify the PCI address of the card
 your want to use, which must be specified if more than one card supported
 by the selected programmer is installed in your system. The syntax is
@@ -782,7 +782,7 @@ where
 .B value
 can be
 .BR 1 " or " 2
-to select target chip 1 or 2 repectively. The default is target chip 1.
+to select target chip 1 or 2 respectively. The default is target chip 1.
 .SS
 .BR "rayer_spi " programmer
 The default I/O base address used for the parallel port is 0x378 and you can use
@@ -998,7 +998,7 @@ and associated flashrom options in the
 paragraph in the
 .B internal programmer
 subsection of the
-.B PROGRAMMER SPECIFIC INFO
+.B PROGRAMMER-SPECIFIC INFORMATION
 section and the information in our wiki at
 .BR "http://www.flashrom.org/Laptops " .
 .SS