National Semiconductor DP83815/DP83816 and DP83820 NIC programmer

support.
Some instability remains, but that may be due to hardware problems in
the specific card (Netgear FA311) used for testing.

Signed-off-by: Andrew Morgan <ziltro@ziltro.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1039 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 87 insertions, 0 deletions

diff --git a/nicnatsemi.c b/nicnatsemi.c
new file mode 100644
index 0000000..1878f51
--- /dev/null
+++ b/nicnatsemi.c
@@ -0,0 +1,87 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2010 Andrew Morgan <ziltro@ziltro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <stdlib.h>
+#include "flash.h"
+
+#define PCI_VENDOR_ID_NATSEMI	0x100b
+
+#define BOOT_ROM_ADDR		0x50
+#define BOOT_ROM_DATA		0x54
+
+struct pcidev_status nics_natsemi[] = {
+	{0x100b, 0x0020, NT, "National Semiconductor", "DP83815/DP83816"},
+	{0x100b, 0x0022, NT, "National Semiconductor", "DP83820"},
+	{},
+};
+
+int nicnatsemi_init(void)
+{
+	get_io_perms();
+
+	io_base_addr = pcidev_init(PCI_VENDOR_ID_NATSEMI, PCI_BASE_ADDRESS_0,
+				   nics_natsemi, programmer_param);
+
+	buses_supported = CHIP_BUSTYPE_PARALLEL;
+
+	return 0;
+}
+
+int nicnatsemi_shutdown(void)
+{
+	free(programmer_param);
+	pci_cleanup(pacc);
+	release_io_perms();
+	return 0;
+}
+
+void nicnatsemi_chip_writeb(uint8_t val, chipaddr addr)
+{
+	OUTL((uint32_t)addr & 0x0000FFFF, io_base_addr + BOOT_ROM_ADDR);
+	/*
+	 * The datasheet requires 32 bit accesses to this register, but it seems
+	 * that requirement might only apply if the register is memory mapped.
+	 * Bit 8-31 of this register are apparently don't care, and if this
+	 * register is I/O port mapped 8 bit accesses to the lowest byte of the
+	 * register seem to work fine. Due to that, we ignore the advice in the
+	 * data sheet.
+	 */
+	OUTB(val, io_base_addr + BOOT_ROM_DATA);
+}
+
+uint8_t nicnatsemi_chip_readb(const chipaddr addr)
+{
+	OUTL(((uint32_t)addr & 0x0000FFFF), io_base_addr + BOOT_ROM_ADDR);
+	/*
+	 * The datasheet requires 32 bit accesses to this register, but it seems
+	 * that requirement might only apply if the register is memory mapped.
+	 * Bit 8-31 of this register are apparently don't care, and if this
+	 * register is I/O port mapped 8 bit accesses to the lowest byte of the
+	 * register seem to work fine. Due to that, we ignore the advice in the
+	 * data sheet.
+	 */
+	return INB(io_base_addr + BOOT_ROM_DATA);
+}
+
+#else
+#error PCI port I/O access is not supported on this architecture yet.
+#endif