diff options
| author | uwe <uwe@2b7e53f0-3cfb-0310-b3e9-8179ed1497e1> | 2011-10-14 20:33:14 +0000 |
|---|---|---|
| committer | uwe <uwe@2b7e53f0-3cfb-0310-b3e9-8179ed1497e1> | 2011-10-14 20:33:14 +0000 |
| commit | 7c30d4fac80014a61448cf87b6e8d55449516203 (patch) | |
| tree | a682fd11ab2f4aa6cb256187a565a5361359ec02 /util | |
| parent | 63e7aa8b6931529e1c7c0ef1fa1cf4198f394e7f (diff) | |
| download | flashrom-7c30d4fac80014a61448cf87b6e8d55449516203.tar.gz | |
TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) support.
Thanks to TIAO/DIYGADGET for sponsoring a test device!
This is an FTDI FT2232H based device which provides an easily accessible JTAG,
SPI, I2C, serial breakout. The SPI part can be used to flash SPI flash chips
using flashrom.
http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html
http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual#SPI_Connector_1
There are two SPI connectors (pin headers) on the board: SPI1, which is
connected to the FT2232H's A interface, and SPI2, which is connected to the
chip's B interface. Both can be used to flash SPI chips:
flashrom -p ft2232_spi:type=tumpa,port=A
flashrom -p ft2232_spi:type=tumpa,port=B
The default interface is A, so for SPI1 you can also just write:
flashrom -p ft2232_spi:type=tumpa
I tested all operations on both interfaces, everything works fine.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1451 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'util')
| -rw-r--r-- | util/z60_flashrom.rules | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/util/z60_flashrom.rules b/util/z60_flashrom.rules index c298968..2b4ab6d 100644 --- a/util/z60_flashrom.rules +++ b/util/z60_flashrom.rules @@ -72,4 +72,8 @@ ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="0004", MODE="664", GROUP="plugdev" # http://olimex.com/dev/arm-usb-tiny-h.html ATTRS{idVendor}=="15ba", ATTRS{idProduct}=="002a", MODE="664", GROUP="plugdev" +# TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) +# http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a98", MODE="664", GROUP="plugdev" + LABEL="flashrom_rules_end" |