diff options
Diffstat (limited to 'flashrom.8.tmpl')
-rw-r--r-- | flashrom.8.tmpl | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 153591a..81eceaa 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -229,7 +229,7 @@ bitbanging adapter) .sp Some programmers have optional or mandatory parameters which are described in detail in the -.B PROGRAMMER SPECIFIC INFO +.B PROGRAMMER-SPECIFIC INFORMATION section. Support for some programmers can be disabled at compile time. .B "flashrom \-h" lists all supported programmers. @@ -242,11 +242,11 @@ Save the full debug log to .BR <logfile> . If the file already exists, it will be overwritten. This is the recommended way to gather logs from flashrom because they will be verbose even if the -on-screen messages are not verbose. +on-screen messages are not verbose and don't require output redirection. .TP .B "\-R, \-\-version" Show version information and exit. -.SH PROGRAMMER SPECIFIC INFO +.SH PROGRAMMER-SPECIFIC INFORMATION Some programmer drivers accept further parameters to set programmer-specific parameters. These parameters are separated from the programmer name by a colon. While some programmers take arguments at fixed positions, other @@ -474,7 +474,7 @@ like above. In this case you can use .sp .B " flashrom \-p internal:laptop=this_is_not_a_laptop" .sp -to tell flashrom (at your own risk) that it does not running on a laptop. +to tell flashrom (at your own risk) that it is not running on a laptop. .SS .BR "dummy " programmer The dummy programmer operates on a buffer in memory only. It provides a safe @@ -595,7 +595,7 @@ is an 8-bit hexadecimal value. .SS .BR "nic3com" , " nicrealtek" , " nicnatsemi" , " nicintel", " nicintel_eeprom"\ , " nicintel_spi" , " gfxnvidia" , " ogp_spi" , " drkaiser" , " satasii"\ -, " satamv" , " atahpt" ", " atavia " and " it8212 " programmers +, " satamv" , " atahpt", " atavia " and " it8212 " programmers These programmers have an option to specify the PCI address of the card your want to use, which must be specified if more than one card supported by the selected programmer is installed in your system. The syntax is @@ -782,7 +782,7 @@ where .B value can be .BR 1 " or " 2 -to select target chip 1 or 2 repectively. The default is target chip 1. +to select target chip 1 or 2 respectively. The default is target chip 1. .SS .BR "rayer_spi " programmer The default I/O base address used for the parallel port is 0x378 and you can use @@ -998,7 +998,7 @@ and associated flashrom options in the paragraph in the .B internal programmer subsection of the -.B PROGRAMMER SPECIFIC INFO +.B PROGRAMMER-SPECIFIC INFORMATION section and the information in our wiki at .BR "http://www.flashrom.org/Laptops " . .SS |