| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested mainboards:
OK:
- ASRock G31M-GS
Reported by Александр Трубицын
- ASRock G41M-VS3
Reported by Александр Трубицын
- ASRock N68C-S UCC
Reported by Alexey Belyaev
- ASRock AMCP7AION-HT (ION 330HT(-BD))
Reported by Stefan Tauner
- ASUS P5K SE
Reported by Александр Трубицын
- ASUS P5KPL-VM
Reported by Marin Vlah
- ASUS RAMPAGE III GENE
Reported by stevessss on IRC
- GIGABYTE GA-945GM-S2
Reported by Александр Трубицын
- GIGABYTE GA-945GCM-S2 (rev. 3.0)
Reported by Александр Трубицын
- GIGABYTE GA-965P-S3
Reported by Александр Трубицын
- GIGABYTE GA-EG43M-S2H
Reported by Александр Трубицын
- GIGABYTE GA-EP31-DS3L (rev. 1.0)
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2
Reported by Александр Трубицын
- GIGABYTE GA-G33M-S2L
Reported by Александр Трубицын
- GIGABYTE GA-H55M-S2
Reported by Александр Трубицын
- GIGABYTE GA-J1900N-D3V
Reported by Marcos Truchado and Guillermo von Hünefeld
- GIGABYTE GA-K8NS
Reported by nicolae788
- GIGABYTE GA-M56S-S3
Reported by Estevo Paz Freire
- GIGABYTE GA-P31-DS3L
Reported by Александр Трубицын
- GIGABYTE GA-P31-S3G
Reported by Александр Трубицын
- MSI MS-7336
Reported by Benjamin Bellec
- MSI X79A-GD45 (8D) (MS-7760)"
Reported by mortehu on IRC
- Supermicro A1SAi-2550F
Reported by Bernard Grymonpon
- Supermicro X7DWT
Reported by Steven Stremciuc
Laptop:
- ASUS U38N
Reported by Ultra on IRC
- Dell Latitude D630
Reported by Márton Miklós
- Fujitsu Amilo Xi 3650
Reported by Elmar Stellnberger
- Lenovo T400 (whitelisting only)
Chipsets:
- Mark 8086:1f38 (Intel Avoton/Rangeley) as tested
Reported by Jeremy Porter and Bernard Grymonpon
- Add Intel Sunrise Point IDs but no support yet.
Flash chips:
- Atmel AT45DB321D to PREW (+PREW)
Reported by The Raven
- Eon EN25QH32 to PREW (+PREW)
Reported by Josua Mayer
- Eon EN25QH64 to PREW (+EW)
Reported by David s. Alessio
- GigaDevice GD25LQ64(B) to PREW (+PREW)
Reported by Greg Tippit
- Intel 28F001BN/BX-T to PREW (+EW)
Reported by Lu Xie
- Micron M25P10-A to PREW (+W)
Reported by the Raven
- Micron M25PE40
Reported by David Wood
- Micron N25Q128..3E to PREW (+PREW)
Reported by Miklós Márton
- Macronix MX25L3273E to PREW (+PREW)
Reported by Roklobsta on IRC
- Macronix MX23L6454 to PR (+PR)
Reported by Steven Honeyman
- Macronix MX25U6435E/F to PREW (+PREW)
Reported by Marcos Truchado and Guillermo von Hünefeld
- PMC Pm25LQ032C to PREW (+EW)
Reported by Dirk Knop
- Spansion S25FL016A to PREW (+EW)
Reported by Márton Miklós
- Spansion S25FL128S......0 to PREW (+PREW)
Reported by Jim Houston
- Spansion S25FL204K to PR (+PR)
Reported by Thomas Debrunner
- SST SST49LF016C to PREW (+EW)
Reported by Steven Stremciuc
- SST SST39VF040 to PREW (+PREW)
Reported by Xavier Bourgeois
- SST SST49LF040B to PREW (+EW)
Reported by Rikard Åhlund
- ST M25P10-A to PREW (+W)
Reported by Martijn Schiedon
- Winbond W39V040FA to PREW (+EW)
Reported by Евгений Черкашин
- Winbond W39V080FA to PREW (+EW)
Reported by protagonist0 on IRC
- Winbond W25Q80.W to PREW (+PREW)
Reported by Miklós Márton
- Winbond W25X64 to PREW (+REW)
Reported by Johannes Krampf and Manuel Dejonghe
- Fix ID of AMIC A25LQ64
Reported by Roman Titov
- Fix page size of Spansion S25FL129P......1
Copy and paste error from the 128S uniform 256kB variant, probably.
- Add Micron/Numonyx phase-change memory IDs
Miscellaneous:
- Detect Android target OS.
No changes are required to build flashrom (excluding programmers
with NEED_PCI) on Android.
- Update rayerspi (spipgm) URL
- Fix max_data_write handling of at45db.
- Minor refinement of the README
- Mark board enable for the GA-K8NS variants as tested.
Tested by "nicolae788" on a board with socket 754.
- Mark "Multi-system" chassis as non-laptop case.
- Remove W836xx log requests.
We got enough (and no one is looking at them for the time being anyway).
- serprog: improve invalid reply error message, contributed by Urja Rannikko.
- Remove default include paths for MinGW.
- Disable implicit rules in the Makefile because we don't need them and they
just make the build (imperceptibly) slower.
- Enable our own strnlen() implementation not only on DJGPP but also if
HAVE_STRNLEN is not defined. This is needed to get older BSDs
(e.g. NetBSD 6.0, FreeBSD < 8.0) to work.
- Tiny other stuff.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1917 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since r1833 we added the offset of the virtual register in several
functions, which produced segfaults. This patch renames a few
parameters and reorganizes/fixes various parts of the
changelock_regspace2_block() function - hence the rather big diff.
Thanks to Roman Lebedev for reporting this issue and testing numerous
revisions of this patch.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1859 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Create distinct functions for mapping and unmapping for flash chips.
- Map only when needed: map before probing and unmap immediately
after it. Map again when a single chip was probed successfully before
taking any actual actions and clean up afterwards.
- Map special function chip registers centrally together with flash space
instead of within (some) probing methods after successful probes.
- Save the used base addresses of the mappings in struct flashctx as well.
- Do not try to (un)map the zero-sized chip definitions that are merely hacks.
This also fixes the printing of wrong warnings for these chip definitions
introduced in r1765.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1847 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some Parallel bus chips have a 16-bit mode and an 8-bit mode. They use
normal JEDEC addresses for 16-bit mode and shifted addresses (by 1 bit)
for 8-bit mode. Some programmers can access them in 16-bit mode, but on
all flashrom-supported programmers so far, we access them in 8-bit mode.
This means we have to shift the addresses but apart from the addresses
we can share the code.
This patch makes this possible by checking the chip's FEATURE_ADDR_SHIFTED
flag in common JEDEC functions and applying the right addresses respectively.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1840 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
29GL chips use a new 3-Byte device ID probing function at addresses
0x01, 0x0E, 0x0F.
Flash chip families supported by this method include...
- EON EN29GL
- Gigadevice GD29GL (if they really exist)
- ISSI (PMC) IS29GL
- Macronix MX29GL (+MX68GL1G0F)
- Spansion S29GL (+S70GL02G)
- Winbond W29GL
This patch adds respective flash chip definitions for chips up to 16 MB from
Eon, ISSI, Macronix and Winbond. Bigger chips as well as those from
Gigadevice and Spansion are left out.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1835 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
This includes PMC Pm49*, SST 49LF00*, ST M50* and Winbond W39* families.
The erase and write test status bits of all affected chips have been reset.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1833 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
| |
Also, include chipdrivers.h to find conflicting types between exported
declarations and actual implementations.
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1805 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is no reason for negative delays in our use cases:
- We don't need it (to work around any quirks).
- sleep() (POSIX) uses an unsigned argument.
- usleep() (POSIX) uses an unsigned argument.
- Sleep() (Windows) uses an unsigned argument.
Change all callees as well (without any complications).
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1782 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tested mainboards:
OK:
- ASUS C60M1-I
http://www.flashrom.org/pipermail/flashrom/2013-February/010578.html
- ASUS P8H77-I
http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html
- ASUS P8H77-M
http://www.flashrom.org/pipermail/flashrom/2013-May/010994.html
- ASUS P8P67 LE (B2)
http://www.flashrom.org/pipermail/flashrom/2013-May/010972.html
- Elitegroup GeForce6100PM-M2 (V3.0)
http://www.flashrom.org/pipermail/flashrom/2013-July/011177.html
- GIGABYTE GA-P55A-UD7
http://www.flashrom.org/pipermail/flashrom/2013-July/011302.html
- MSI B75MA-E33 (MS-7808)
http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html
- MSI H77MA-G43 (MS-7756)
http://www.flashrom.org/pipermail/flashrom/2013-April/010853.html
- MSI KA780G (MS-7551)
http://paste.flashrom.org/view.php?id=1617
- SAPPHIRE IPC-E350M1
Reported by xvilka on IRC
- Supermicro X8DTG-D
http://www.flashrom.org/pipermail/flashrom/2013-July/011305.html
NOT OK:
- ASRock Fatal1ty Z77 Performance
http://www.flashrom.org/pipermail/flashrom/2013-January/010467.html
- ASRock Z68 Extreme4
http://www.flashrom.org/pipermail/flashrom/2013-May/010984.html
- ASUS P8B75-M LE
http://www.flashrom.org/pipermail/flashrom/2013-April/010867.html
- ASUS P8P67-M PRO
http://www.flashrom.org/pipermail/flashrom/2013-February/010541.html
- ASUS P8Z68-V LE
http://www.flashrom.org/pipermail/flashrom/2013-February/010582.html
- Intel DQ77MK
http://paste.flashrom.org/view.php?id=1603
- Supermicro X9DRD-7LN4F
http://paste.flashrom.org/view.php?id=1582
- Supermicro X9SCE-F
http://www.flashrom.org/pipermail/flashrom/2013-February/010588.html
- Supermicro X9SCM-F
http://www.flashrom.org/pipermail/flashrom/2013-February/010527.html
- Tyan S7066
http://www.flashrom.org/pipermail/flashrom/2013-March/010630.html
Chipsets:
- Marked Intel B75 as tested
http://www.flashrom.org/pipermail/flashrom/2013-March/010659.html
- Marked Intel H77 as tested
http://www.flashrom.org/pipermail/flashrom/2013-March/010607.html
- Removed 10de:03e2 because it is apparently the MCP61 host bridge.
It was reclassified to Host Bridge in the PCI device ID database and there
is at least one report suggesting this configuration too:
http://www.flashrom.org/pipermail/flashrom/2012-August/009716.html
- Added MCP89 which hopefully works with the code for previous versions.
Thanks to James Laird for submitting this change.
Tested flash chips:
- Atmel AT25DF641(A) to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-June/011113.html
- Atmel AT25F512 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-April/010904.html
Also, change its ID according to Modification of PCN SC040401A:
"There has been a change in the returned value of the Product Identification
(RDID) command, the AT25F512A RDID code is 65h compared to 60h from
the AT25F512 product."
It seems to be quite likely that all AT25F512 are fully functional relabeled
AT25F1024 chips. There are even some hints in the datasheet:
in table 6 they stress that address pin 16 needs to be low under all circum-
stances; while continuous reads can wrap around on the AT25F1024 the DS
notes "For the AT25F512, the read command must be terminated when the
highest address (00FFFF) is reached." OTOH the lock bit semantics are
different, but this has not been tested thoroughly
- Atmel AT25F512A to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1569
- Eon EN25F05 to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1571
- Macronix MX25L12805(D) to PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2013-April/010913.html
- Spansion S25FL256S......0 and S25FL512S to P/!R!E!W (+P)
Tested by Stefan Tauner
- Micron/Numonyx/ST M25PX80 to PREW (+PREW)
Tested by Stefan Tauner
- Micron/Numonyx/ST N25Q032..3E and N25Q128..3E to PREW (+PREW)
Tested by Stefan Tauner
- Micron/Numonyx/ST N25Q256..3E and N25Q512..3G to P/!R!E!W (+P)
Tested by Stefan Tauner
- SST SST25VF040B to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1574
- SST SST25VF040B.REMS to PREW (+EW)
http://paste.flashrom.org/view.php?id=1575
- ST M25P05-A to PREW (+PREW)
http://paste.flashrom.org/view.php?id=1576
- ST M29W512B to PREW (+W)
http://www.flashrom.org/pipermail/flashrom/2013-March/010635.html
- Winbond W25Q64.W to PREW (+PREW)
Tested by the chromiumos guys.
- Winbond W25Q128.V to PREW (+REW)
http://www.flashrom.org/pipermail/flashrom/2013-June/011108.html
- Winbond W25X20 to PREW (+PREW)
http://www.flashrom.org/pipermail/flashrom/2013-May/010990.html
Miscellaneous:
- Add Lenovo X201 to the laptop whitelist.
- Add chip IDs for the ESMT F25L..QA family.
- Add chip IDs for a few Macronix MX25 models.
- The list of flashchips is not sorted strictly alphabetically and should not be
either. Refine the comment explaining the scheme on top of the list.
- Support -L output of chip sizes with up to 6 decimal places (up to 4 Gb).
- Use z length modifier in (more) prints for size_t types.
- Remove chips >16MB again because our current implementation of memory mapping
the flash chip violates common rules by mapping a window as large as the chip.
This leads to failing mmaps as can be seen here:
http://paste.flashrom.org/view.php?id=1695
- Document spispeed parameter of linux_spi (and fix some leaks).
- Rephrase the "multiple chips detected" message because it was confusing.
- Skip verification step if the image is equal to the flash contents.
- Tiny other stuff.
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Most parts are also
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1702 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
| |
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1698 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Kyösti Mälkki noticed that we unnecessarily read the flash chip twice when
called with --verify. The first one is the mandatory read before everything
(to be able to detect the seriousness of errors), but the second one is not
necessary because we can just use the former for the comparison.
This introduces a small output change: previously we printed ERASE or
VERIFY depending on the callee. This special case has been dropped
because it is unnecessary to print it (and wrong for the verification
function to need to know why it is verifying exactly).
If an erase fails we mention that fact explicitly already, similar for verify.
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1619 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All the driver conversion work and cleanup has been done by Stefan.
flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1579 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All programmer access function prototypes except init have been made
static and moved to the respective file.
A few internal functions in flash chip drivers had chipaddr parameters
which are no longer needed.
The lines touched by flashctx changes have been adjusted to 80 columns
except in header files.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1474 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
struct flashchip is used only for the flashchips array and for
operations which do not access hardware, e.g. printing a list of
supported flash chips.
struct flashctx (flash context) contains all data available in
struct flashchip, but it also contains runtime information like
mapping addresses. struct flashctx is expected to grow additional
members over time, a prime candidate being programmer info.
struct flashctx contains all of struct flashchip with identical
member layout, but struct flashctx has additional members at the end.
The separation between struct flashchip/flashctx shrinks the memory
requirement of the big flashchips array and allows future extension
of flashctx without having to worry about bloat.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1473 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
| |
Push those changes forward where needed to prevent new sign
conversion warnings where possible.
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1470 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- probe_timing was changed to unsigned although we use negative values
for special cases
- some code was not changed along hence did no longer compile:
* dediprog's read and write functions
* linux_spi's read and write functions
- it introduced a number of new sign conversion warnings
(http://paste.flashrom.org/view.php?id=832)
To be safe this patch reverts all changes made in r1448, a corrected
patch will follow later.
Thanks to idwer for pointing out the problem first!
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1450 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
| |
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1448 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this is related to the spi split patch as discussed in:
http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364
the old commit (r914) log notes:
"Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c
ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c"
there still remain a few cases where chipdrivers.h is needed:
dediprog.c (spi_read_chunked and spi_write_chunked)
it87spi.c (due to spi_write_enable and spi_read_status_register)
wbsio_spi.c (spi_programmer registration only)
besides that, there are also non-spi files that do not need it.
also, add flash.h to chipdrivers.h because it uses some types of it
and remove flashchips.h from print.c
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1414 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
internal erase verification can be moved to generic code.
This also makes it easier to skip the verify step if desired and to
differentiate between failed command submission and failed erase
verification.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1353 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It is extremely unlikely that a chip not requiring delays in probe does
require them in erase. We observed unreliable erasing with a SST49LF004A
with these delays, so remove them if the are not required.
In review, I got the hint that "probe_jedec goes further by making that
call conditional on nonzero delay". I decided to ignore that. For
internal_delay, the small amount of clock cycles wasted for calling
programmer_delay(0) is negligible compared to LPC cycle times. It might
be an issue for 5 wasted bytes on the serial line in serprog. OTOH,
flash erase is still slow compared to 6*5 bytes on a serial port at
reasonable speed.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1288 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previous probes might have had too short delays for entering ID mode,
so the chip may still be in the process of entering the ID mode. Due to
that, an additional delay before the reset makes sense.
Add FEATURE_RESET_MASK to deal cleanly with those feature bits.
Maciej Pijanka tested the patch and it fixes probing for him with some
old Atmel chips.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Anders Juel Jensen <andersjjensen@gmail.com>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1216 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The inner write functions which handle partial write are renamed to the
original name of their wrappers. The write wrappers are removed.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Andrew Morgan <ziltro@ziltro.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1211 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Kill duplicated code.
Annotate write functions with their chunk size.
Mark Fujitsu MBM29F400BC and ST M29F400BB as untested because their
write code no longer uses a broken layout.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Tested-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Sean Nelson <audiohacked@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1210 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
| |
equivalence transformations.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1209 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
perform the actual write (inner functions).
The signature of the write wrappers is:
int write_chip(struct flashchip *flash, uint8_t * buf);
The signature of the inner write functions varied a lot. This patch
changes them to:
int write_part(struct flashchip *flash, uint8_t *src, int start, int len);
Did you know that flashrom has only 8 inner write functions for all
flash chips?
write_page_write_jedec_common
write_sector_jedec_common
write_sector_28sf040
spi_chip_write_256_new
spi_chip_write_1_new
spi_aai_write_new
write_page_82802ab
write_page_m29f400bt
Export all inner write functions.
Change the function signature of wait_82802ab to eliminate single-use
variables.
Remove an error message in write_page_m29f400bt which was printed for
every byte written regardless of success.
Add sharplhf00l04.c to the list of flash chip drivers in the Makefile.
While the functions in there are unused, I suspect we will need them
later, and by hooking the file up we ensure that compilation won't
break.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1208 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
Progress printing should be handled in the generic code, and will end up
there once partial write is possible.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1207 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
programmer drivers, but it was not entirely consistent. Some drivers had
their own hand-rolled partial update functionality which made handling
partial updates from generic code impossible.
Move implicit erase out of chip drivers, and kill some dead erase
functions at the same time.
A full chip erase is now performed in the generic code for all flash
chips on write, and after that the whole chip is written.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1206 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Constify variables where possible.
Initialize programmer-related variables explicitly in programmer_init to
allow running programmer_init from a clean state after
programmer_shutdown.
Prohibit registering programmer shutdown functions before init or after
shutdown.
Kill some dead code.
Rename global variables with namespace-polluting names.
Use a previously unused locking helper function in sst49lfxxxc.c.
This is needed for libflashrom.
Effects on the binary size of flashrom are minimal (300 bytes
shrinkage), but the data section shrinks by 4384 bytes, and that's a
good thing if flashrom is operating in constrained envionments.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1068 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Fix a number of typos (found via ispell).
- Use correct vendor names (as per their websites) consistently.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@985 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
Fixed suggestions by Carl-Daniel.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove chipdriver.h include from flash.h
Some of the spi programmer drivers required chipdrivers.h, needs fixing later:
it87spi.c
ichspi.c
sb600spi.c
wbsio_spi.c
buspirate_spi.c
ft2232spi.c
bitbang_spi.c
dediprog.c
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@914 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add FEATURE_SHORT_RESET, FEATURE_LONG_RESET, and FEATURE_EITHER_RESET
rewrite jedec functions to use getaddrmask
convert write_49f002 to write_jedec_1
convert write_w39v040c to write_jedec_1
convert probe_w39v040c to probe_jedec
convert write_49lf040 to write_jedec_1
convert write_pm29f002 to write_jedec
convert write_29f040b to write_jedec_1
convert probe_29f040b to probe_jedec
convert erase_chip_29f040b to erase_chip_block_jedec
convert erase_sector_29f040b to erase_sector_jedec
convert write_m29f002b to write_jedec
convert write_m29f002t to write_jedec
convert *_29f002 to *_jedec
decouple unused files from Makefile:
am29f040b.c
en29f002a.c
m29f002.c
mx29f002.c
pm29f002.c
sst49lf040.c
w39v040c.c
w49f002u.c
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Anders Juel Jensen <andersjjensen@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@886 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
probe_jedec function instead of half a dozen wrappers.
The trick here is to have FEATURE_ADDR_FULL==0 and thus default to
unmasked addresses. That way, we only have to annotate chips which need
small address masks.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@840 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All functions which just call probe_jedec and then map flash registers
are replaced by probe_jedec. All functions which call probe_jedec, map
flash registers and do something else can at least eliminate mapping
flash registers.
Fix logic inversion in probe_jedec to map flash registers on success
instead of on failure.
Change a few TIMING_IGNORED to TIMING_FIXME where probe_jedec is used.
Total savings: One probe function simplified, three probe functions
eliminated.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@839 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
for many chip provided the only changes are the addresses are converted from
0x5555/0x2AAA to 0x555/0x2AA or similar. The patch mostly changes jedec.c, but
a few other files are changed because they use the jedec functions within
their own functions.
The patch also adds a copyright line to flashchips.c because of my recent work in converting AMD and Atmel chips to use struct erase_block.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@828 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Am29F010A/B
Am29F002(N)BB
Am29F002(N)BT
Am29F016D
Am29F040B
Am29F080B
Am29LV040B
Am29LV081B
A29040B
Pm29F002T
Pm29F002B
Change function signature of Am29 erase functions and JEDEC chip erase
to be usable with block_erasers.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@812 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
good sign we should have used delays between toggle bit reads. Tell the
user about this. 2^20 loops need roughly a second depending on flash
bus speed. One reason for excessive loops can be a slow operation like
erase.
The Winbond W39V040C requires a 50 ms delay between toggle bit reads
during erase according to the datasheet. Turns out a 2 ms delay is
sufficient. Use a safety factor of 4 and default all erase operations to
8 ms delay between toggle reads. This is short enough not to have a
substantial negative impact on erase times, and should improve
reliability.
This patch addresses the excessive toggle behaviour (observed on some
non-Winbond chips) and the toggle delay requirement (Winbond W39V040C).
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Javier Ortega Conde (aka Malkavian) <malkavian666@gmail.com>
Acked-By: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@807 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
| |
on the value except for delays between single chip_writeb.
If a chip has zero probe_delay, delays between chip_writeb should be
skipped as well.
Signed-off-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@805 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
in en29f002a.c is reintroduced as write_by_byte_jedec in jedec.c as it
contains no chip-specific instructions. It is not yet used in other
chip drivers, as key addresses (0x2AAA/0x5555) are often specified with
less bits. After crosschecking datasheets, most of the fixmes can
probably be resolved as indicated in them, causing significant code
reduction.
The common JEDEC code for bytewise programming does not program 0xFF at
all.
The chips that had a dedicated bytewise flash function which has been
changed to write_jedec_1 thus changed flashing behaviour and the
"write" test flag has been removed. This applies to:
AMD Am29F002BB/Am29F002NBB
AMD Am29F002BT/Am29F002NBT (TEST_OK_PREW before)
AMIC A29002B
AMIC A29002T (TEST_OK_PREW before)
EON EN29F002(A)(N)B
EON EN29F002(A)(N)T (TEST_OK_PREW before)
Macronix MX29F001B (TEST_OK_PREW before)
Macronix MX29F001T (TEST_OK_PREW before)
Macronix MX29F002B
Macronix MX29F002T (TEST_OK_PREW before)
Macronix MX29LV040
Similar analysis should be performed for the read id stuff.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@785 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
which is not used at all within flashrom code, and renames the
misleadingly named protect_jedec function to start_program_jedec. Calls
to protect_jedec after flashing are removed, because
a) on LPC chips, the command sent by protoct_jedec is not even in the
datasheet and
b) on parallel chips, the block write command issued before already
contained the software protection sequence, so software protection is
definitely enabled.
This patch also removes two clones of protect_jedec
Background: JEDEC Software Data Protection started as an optional
feature, which was disabled on the first single-voltage-flash chips. The
software data protection is the need to prefix a write with a magic
"write enable" command, while without write protection every write
access into the chip's address space modifies flash content. This magic
write enable command also tells the flash chip that the programmer
obviously support sending write-enable commands and turns off the "any
write modifies flash content" mode. There also exist a two-command (6
writes) sequence that disables Software Data Protection completey, which
should only ever be used to prepare updating with a device that can't
handle software data protection.
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Sean Nelson <audiohacked@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@783 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
jedec.c error handling used double negation in too many places for no
good reason. Clean up.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Sean Nelson <audiohacked@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@779 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
correct range, essentially rendering the functionality useless. This
patch simplifies the code and fixes the bug.
Thanks to Luke Dashjr for testing.
Mark Winbond W29C040P as supported.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luke Dashjr <luke_coreboot@dashjr.org>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@757 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
| |
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@751 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(unsupported) chip erase.
Annotate SST49LF004B quirks for TBL#.
Add TEST_OK_PRW which is useful when a PREW chip gets a new erase
routine.
Change a few erase function prototypes to use unsigned int instead of
int.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@731 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The __func__ variant is standardized in C99 and recommended to be
used instead of __FUNCTION__ in the gcc info page.
Only _very_ old versions of gcc did not know about __func__, but we've
been using both __func__ and __FUNCTION__ for a long while now, and
nobody complained about this, so all our users seem to use recent
enough compilers.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@711 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
functions. This makes visual inspection and grepping a lot harder than
necessary.
Remove line breaks where appropriate.
Some error messages should end up on stderr instead of just being
displayed in verbose mode.
Thanks to Maciej Pijanka for testing.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@660 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
write_page_write_jedec (jedec.c).
Tested by Urja Rannikko with external flasher.
Tested by Uwe Hermann with onboard flash.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@632 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
And even when it checks if the erase worked, the result of that check is
often ignored.
Convert all erase functions and actually check return codes
almost everywhere.
Check inside all erase_* routines if erase worked, not outside.
erase_sector_jedec and erase_block_jedec have changed prototypes to
enable erase checking.
Uwe successfully tested LPC on an CK804 box and SPI on some SB600 box.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@595 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
handle the delay on their own if needed.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Urja Rannikko <urjaman@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@578 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
conflicting delay requirements for old and new chips with the same
probing sequence.
Signed-Off-by: Maciej Pijanka <maciej.pijanka@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@569 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|