| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Intel 82599 series of 10 GbE controllers has a bit-banged SPI
interface that's register-compatible with the one in the 1 GbE
controllers, except the register addresses are shifted up by
0x10000, cf. Intel document 331520:
http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/82599-10-gbe-controller-datasheet.pdf
This patch was tested with a board that has the 0x10fc device and a Micron
M25P40 SPI flash chip. The PCI IDs and names for the devices are per Intel document 331521
https://www-ssl.intel.com/content/dam/www/public/us/en/documents/specification-updates/82599-10-gbe-controller-spec-update.pdf
and the PCI SIG device ID registry with small refinements.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1856 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
register_programmer suggests that we register a programmer. However,
that function registers a master for a given bus type, and a programmer
may support multiple masters (e.g. SPI, FWH). Rename a few other
functions to be more consistent.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1831 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
| |
Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1813 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
| |
Signed-off-by: Bill Paul <wpaul@windriver.com>
Acked-by: Idwer Vollering <vidwer@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1767 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The only call path where exit was reached was from physmap functions.
Callers of physmap() et al. which were not prepared to handle
ERROR_PTR return values have been adjusted.
physmap_try_ro() has been renamed to physmap_ro() and physmap_common()
slightly refactored due to the now removed *FAIL parameters.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1745 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
| |
This is mostly a leftover of Niklas' "remove exit call from pcidev_init" patch.
While not explicitly necessary detecting errors early is usually a good idea.
Signed-off-by: Niklas Söderlund <niso@kth.se>
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1718 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
| |
Similarly to the previous PCI self-clean up patch this one allows to get rid
of a huge number of programmer shutdown functions and makes introducing
bugs harder. It adds a new function rphysmap() that takes care of unmapping
at shutdown. Callers are changed where it makes sense.
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1714 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pcidev_init() now returns struct pci_device * instead of a BAR stored in
PCI config space. This allows for real error checking instead of having
exit(1) everywhere in pcidev.c.
Thanks to Niklas Söderlund for coming up with the original error
handling patch which was slightly modified and folded into this patch.
Move the declaration of struct pci_device in programmer.h before the
first user.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1644 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously the internal programmer used its own code to initialize pcilib.
This patch extracts the common code from the internal programmer and
pcidev_init() into pcidev_init_common().
This fixes the non-existent PCI cleanup of the internal programmer and adds
an additional safety by checking for an already existing PCI context.
We got a nice shutdown function registration infrastructure, but did not use it
very wisely. Instead we added shutdown functions to a myriad of programmers
unnecessarily. In this patch we get rid of those that do only call pci_cleanup(pacc)
by adding a shutdown function the pcidev.c itself that gets registered by
pcidev_init().
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1642 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Once upon a time usbdev_status was created for the ft2232
programmer. Its IDs are semantically different to pcidev_status
because they indicate USB instead of PCI IDs, but apart from that
both data structures are equal. This change makes life easier for
everything involved in handling and printing the status of devices
that is noted in those structures by combining them into dev_entry.
It is still possible to distinguish between PCI and USB devices
indirectly by using the struct programmer's type field.
Also, add a programmer column to the PCI and USB devices lists.
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1632 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch just fixes a limited number of bits not conforming to c99 by using
- __asm__ instead of just asm
- {0} instead of {} for struct initialization
- h_addr_list[0] instead of h_addr to access the host address in
struct hostent
- #include <strings.h> where needed (for ffs and strcasecmp)
Based on a previous patch by Carl-Daniel.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1585 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
| |
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1584 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
get_io_perms() is renamed to rget_io_perms() and automatically registers
a function to release I/O permissions on shutdown.
Actually release I/O permissions on Solaris and iopl()-supporting
operating systems like Linux.
This patch fixes quite a few programmers which forgot to release I/O
permissions on shutdown, and it simplifies the shutdown and error
handling code for all others.
Do not call exit(1) if I/O permissions are denied and return an error
instead. This part of the patch was written by Niklas Söderlund.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Niklas Söderlund <niso@kth.se>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1551 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move hwaccess.h #include from flash.h to individual drivers.
libflashrom users need flash.h, but they do not care about hwaccess.h
and should not see its definitions because they may conflict with
other hardware access functions and #defines used by the libflashrom
user.
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1549 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
| |
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1510 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All programmer types (Parallel, SPI, Opaque) now register themselves
into a generic programmer list and probing is now programmer-centric
instead of chip-centric.
Registering multiple SPI/... masters at the same time is now possible
without any problems. Handling multiple flash chips is still unchanged,
but now we have the infrastructure to deal with "dual BIOS" and "one
flash behind southbridge and one flash behind EC" sanely.
A nice side effect is that this patch kills quite a few global variables
and improves the situation for libflashrom.
Hint for developers:
struct {spi,par,opaque}_programmer now have a void *data pointer to
store any additional programmer-specific data, e.g. hardware
configuration info.
Note:
flashrom -f -c FOO -r forced_read.bin
does not work anymore. We have to find an architecturally clean way to
solve this.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1475 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch attempts to resolve some programmer shutdown ordering issues
by having the programmer init functions register shutdown callbacks explicitly
wherever it makes most sense. Before, assumptions were made that could lead to
the internal programmer's state changing before the external programmer could be
shut down properly. Now, each programmer cleans up after itself and (hopefully)
performs each operation in the correct order.
As a side-effect, this patch gives us a better usage model for reverse
operations such as rpci_* and rmmio_*. In the long-run, this should make
reversing the initialization process easier to understand, less tedious, and
less error-prone.
In short, this patch does the following:
- Registers a shutdown callback during initialization for each programmer.
- Kills the .shutdown function pointer from programmer_entry struct. Also,
make most shutdown functions static.
- Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls).
TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff)
Signed-off-by: David Hendricks <dhendrix@google.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1338 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
| |
Signed-off-by: Stefan Tauner <stefan.tauner@student.tuwien.ac.at>
Acked-by: Idwer Vollering <vidwer@gmail.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1306 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the array spi_programmer, replace it by dynamic registration
instead. Also initially start with no busses supported, and switch to
the default non-SPI only for the internal programmer.
Also this patch changes the initialization for the buses_supported variable
from "everything-except-SPI" to "nothing". All programmers have to set the
bus type on their own, and this enables register_spi_programmer to just add
the SPI both for on-board SPI interfaces (where the internal programmer
already detected the other bus types), as well as for external programmers
(where we have the default "none").
Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1299 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Reversible MMIO space writes now use rmmio_write*().
Reversible PCI MMIO space writes now use pci_rmmio_write*().
If a MMIO value needs to be queued for restore without writing it,
use rmmio_val*().
MMIO space writes which are one-shot (e.g. communication with some chip)
should continue to use the permanent mmio_write* variants.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
David tested it successfully on some NM10/ICH7 platforms which switch
between SPI and LPC targets (x86 BIOS ROM vs. EC firmware ROM).
Acked-by: David Hendricks <dhendrix@google.com>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1292 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
useless anyway since it was present in the pcidevs parameter as well.
This also allows us to handle multiple programmers with different vendor
IDs in the same driver.
Fix compilation of flashrom with only the nicrealtek driver.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1274 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
| |
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: Iain Paton <selsinork@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SPI bitbanging on devices which speak SPI natively has a dual-use
problem: We need to shut down normal SPI operations to do the bitbanging
ourselves. Once we're done, it makes a lot of sense to reenable "normal"
SPI operations again. Add request_bus/release_bus functions to struct
bitbang_spi_master.
Add a bitbang shutdown function (not used yet).
Change MCP SPI and Intel NIC SPI to use the new request/release bus
infrastructure.
Cosmetic changes to a few error messages (80 column limit).
There are multiple possible strategies for bus request/release:
- Request at the start of a SPI command, release immediately afterwards.
- Request at the start of a SPI multicommand, release once all commands
of the multicommand are done.
- Request on programmer init, release on shutdown.
Each strategy has its own advantages. For now, we will stay with the
first strategy which worked fine so far.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1171 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Tested on a 82541PI (0x8086, 0x107c) using 32-bit hardware.
The last line in nicintel_request_spibus() could be changed so that FL_BUSY
is used instead.
Shortened sample log:
[...]
Found "Intel 82541PI Gigabit Ethernet Controller" (8086:107c, BDF 01:03.0).
Found chip "ST M25P10.RES" (128 KB, SPI) at physical address 0xfffe0000.
Multiple flash chips were detected: M25P05.RES M25P10.RES
Please specify which chip to use with the -c <chipname> option.
[...]
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: https://code.coreboot.org/svn/flashrom/trunk@1151 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|