diff options
Diffstat (limited to 'src/flex.skl')
| -rw-r--r-- | src/flex.skl | 3443 |
1 files changed, 0 insertions, 3443 deletions
diff --git a/src/flex.skl b/src/flex.skl deleted file mode 100644 index 9a69520..0000000 --- a/src/flex.skl +++ /dev/null @@ -1,3443 +0,0 @@ -%# -*-C-*- vi: set ft=c: -%# This file is processed in several stages. -%# Here are the stages, as best as I can describe: -%# -%# 1. flex.skl is processed through GNU m4 during the -%# pre-compilation stage of flex. Only macros starting -%# with `m4preproc_' are processed, and quoting is normal. -%# -%# 2. The preprocessed skeleton is translated into a C array, saved -%# as "skel.c" and compiled into the flex binary. The %# comment -%# lines are removed. -%# -%# 3. At runtime, the skeleton is generated and filtered (again) -%# through m4. Macros beginning with `m4_' will be processed. -%# The quoting is "[[" and "]]" so we don't interfere with -%# user code. -%# -%# All generated macros for the m4 stage contain the text "m4" or "M4" -%# in them. This is to distinguish them from CPP macros. -%# The exception to this rule is YY_G, which is an m4 macro, -%# but it needs to be remain short because it is used everywhere. -%# -/* A lexical scanner generated by flex */ - -%# Macros for preproc stage. -m4preproc_changecom - -%# Macros for runtime processing stage. -m4_changecom -m4_changequote -m4_changequote([[, ]]) - -%# -%# Lines in this skeleton starting with a "%" character are "control lines" -%# and affect the generation of the scanner. The possible control codes are -%# listed and processed in misc.c. -%# -%# %# - A comment. The current line is omitted from the generated scanner. -%# %if-c++-only - The following lines are printed for C++ scanners ONLY. -%# %if-c-only - The following lines are NOT printed for C++ scanners. -%# %if-c-or-c++ - The following lines are printed in BOTH C and C++ scanners. -%# %if-reentrant - Print for reentrant scanners.(push) -%# %if-not-reentrant - Print for non-reentrant scanners. (push) -%# %if-bison-bridge - Print for bison-bridge. (push) -%# %if-not-bison-bridge - Print for non-bison-bridge. (push) -%# %endif - pop from the previous if code. -%# %% - A stop-point, where code is inserted by flex. -%# Each stop-point is numbered here and also in the code generator. -%# (See gen.c, etc. for details.) -%# %not-for-header - Begin code that should NOT appear in a ".h" file. -%# %ok-for-header - %c and %e are used for building a header file. -%# %if-tables-serialization -%# -%# All control-lines EXCEPT comment lines ("%#") will be inserted into -%# the generated scanner as a C-style comment. This is to aid those who -%# edit the skeleton. -%# - -%not-for-header -%if-c-only -%if-not-reentrant -m4_ifelse(M4_YY_PREFIX,yy,, -#define yy_create_buffer M4_YY_PREFIX[[_create_buffer]] -#define yy_delete_buffer M4_YY_PREFIX[[_delete_buffer]] -#define yy_scan_buffer M4_YY_PREFIX[[_scan_buffer]] -#define yy_scan_string M4_YY_PREFIX[[_scan_string]] -#define yy_scan_bytes M4_YY_PREFIX[[_scan_bytes]] -#define yy_init_buffer M4_YY_PREFIX[[_init_buffer]] -#define yy_flush_buffer M4_YY_PREFIX[[_flush_buffer]] -#define yy_load_buffer_state M4_YY_PREFIX[[_load_buffer_state]] -#define yy_switch_to_buffer M4_YY_PREFIX[[_switch_to_buffer]] -#define yypush_buffer_state M4_YY_PREFIX[[push_buffer_state]] -#define yypop_buffer_state M4_YY_PREFIX[[pop_buffer_state]] -#define yyensure_buffer_stack M4_YY_PREFIX[[ensure_buffer_stack]] -#define yy_flex_debug M4_YY_PREFIX[[_flex_debug]] -#define yyin M4_YY_PREFIX[[in]] -#define yyleng M4_YY_PREFIX[[leng]] -#define yylex M4_YY_PREFIX[[lex]] -#define yylineno M4_YY_PREFIX[[lineno]] -#define yyout M4_YY_PREFIX[[out]] -#define yyrestart M4_YY_PREFIX[[restart]] -#define yytext M4_YY_PREFIX[[text]] -#define yywrap M4_YY_PREFIX[[wrap]] -#define yyalloc M4_YY_PREFIX[[alloc]] -#define yyrealloc M4_YY_PREFIX[[realloc]] -#define yyfree M4_YY_PREFIX[[free]] -) -%endif -%endif -%ok-for-header - -#define FLEX_SCANNER -#define YY_FLEX_MAJOR_VERSION FLEX_MAJOR_VERSION -#define YY_FLEX_MINOR_VERSION FLEX_MINOR_VERSION -#define YY_FLEX_SUBMINOR_VERSION FLEX_SUBMINOR_VERSION -#if YY_FLEX_SUBMINOR_VERSION > 0 -#define FLEX_BETA -#endif - -%# Some negated symbols -m4_ifdef( [[M4_YY_IN_HEADER]], , [[m4_define([[M4_YY_NOT_IN_HEADER]], [[]])]]) -m4_ifdef( [[M4_YY_REENTRANT]], , [[m4_define([[M4_YY_NOT_REENTRANT]], [[]])]]) - -%# This is the m4 way to say "(stack_used || is_reentrant) -m4_ifdef( [[M4_YY_STACK_USED]], [[m4_define([[M4_YY_HAS_START_STACK_VARS]])]]) -m4_ifdef( [[M4_YY_REENTRANT]], [[m4_define([[M4_YY_HAS_START_STACK_VARS]])]]) - -%# Prefixes. -%# The complexity here is necessary so that m4 preserves -%# the argument lists to each C function. - - -m4_ifdef( [[M4_YY_PREFIX]],, [[m4_define([[M4_YY_PREFIX]], [[yy]])]]) - -m4preproc_define(`M4_GEN_PREFIX',`` -[[#ifdef yy$1 -#define ]]M4_YY_PREFIX[[$1_ALREADY_DEFINED -#else -#define yy$1 ]]M4_YY_PREFIX[[$1 -#endif]] -'m4preproc_divert(1)` -[[#ifndef ]]M4_YY_PREFIX[[$1_ALREADY_DEFINED -#undef yy$1 -#endif]]'m4preproc_divert(0)') - -%if-c++-only - /* The c++ scanner is a mess. The FlexLexer.h header file relies on the - * following macro. This is required in order to pass the c++-multiple-scanners - * test in the regression suite. We get reports that it breaks inheritance. - * We will address this in a future release of flex, or omit the C++ scanner - * altogether. - */ - #define yyFlexLexer M4_YY_PREFIX[[FlexLexer]] -%endif - -%if-c-only -m4_ifelse(M4_YY_PREFIX,yy,, - M4_GEN_PREFIX(`_create_buffer') - M4_GEN_PREFIX(`_delete_buffer') - M4_GEN_PREFIX(`_scan_buffer') - M4_GEN_PREFIX(`_scan_string') - M4_GEN_PREFIX(`_scan_bytes') - M4_GEN_PREFIX(`_init_buffer') - M4_GEN_PREFIX(`_flush_buffer') - M4_GEN_PREFIX(`_load_buffer_state') - M4_GEN_PREFIX(`_switch_to_buffer') - M4_GEN_PREFIX(`push_buffer_state') - M4_GEN_PREFIX(`pop_buffer_state') - M4_GEN_PREFIX(`ensure_buffer_stack') - M4_GEN_PREFIX(`lex') - M4_GEN_PREFIX(`restart') - M4_GEN_PREFIX(`lex_init') - M4_GEN_PREFIX(`lex_init_extra') - M4_GEN_PREFIX(`lex_destroy') - M4_GEN_PREFIX(`get_debug') - M4_GEN_PREFIX(`set_debug') - M4_GEN_PREFIX(`get_extra') - M4_GEN_PREFIX(`set_extra') - M4_GEN_PREFIX(`get_in') - M4_GEN_PREFIX(`set_in') - M4_GEN_PREFIX(`get_out') - M4_GEN_PREFIX(`set_out') - M4_GEN_PREFIX(`get_leng') - M4_GEN_PREFIX(`get_text') - M4_GEN_PREFIX(`get_lineno') - M4_GEN_PREFIX(`set_lineno') - m4_ifdef( [[M4_YY_REENTRANT]], - [[ - M4_GEN_PREFIX(`get_column') - M4_GEN_PREFIX(`set_column') - ]]) - M4_GEN_PREFIX(`wrap') -) -%endif - -m4_ifdef( [[M4_YY_BISON_LVAL]], -[[ - M4_GEN_PREFIX(`get_lval') - M4_GEN_PREFIX(`set_lval') -]]) - -m4_ifdef( [[<M4_YY_BISON_LLOC>]], -[[ - M4_GEN_PREFIX(`get_lloc') - M4_GEN_PREFIX(`set_lloc') -]]) - - -m4_ifelse(M4_YY_PREFIX,yy,, - M4_GEN_PREFIX(`alloc') - M4_GEN_PREFIX(`realloc') - M4_GEN_PREFIX(`free') -) - -%if-c-only -m4_ifelse(M4_YY_PREFIX,yy,, -m4_ifdef( [[M4_YY_NOT_REENTRANT]], -[[ - M4_GEN_PREFIX(`text') - M4_GEN_PREFIX(`leng') - M4_GEN_PREFIX(`in') - M4_GEN_PREFIX(`out') - M4_GEN_PREFIX(`_flex_debug') - M4_GEN_PREFIX(`lineno') -]]) -) -%endif - - -m4_ifdef( [[M4_YY_TABLES_EXTERNAL]], -[[ - M4_GEN_PREFIX(`tables_fload') - M4_GEN_PREFIX(`tables_destroy') - M4_GEN_PREFIX(`TABLES_NAME') -]]) - -/* First, we deal with platform-specific or compiler-specific issues. */ - -/* begin standard C headers. */ -%if-c-only -m4_ifdef( [[M4_YY_ALWAYS_INTERACTIVE]], , -[[m4_ifdef( [[M4_YY_NEVER_INTERACTIVE]], , -[[/* Feature test macros. Flex uses functions that require a minimum set of - * macros defined. As defining some macros may hide function declarations that - * user code might use, be conservative and respect user's definitions as much - * as possible. In glibc, feature test macros may not be all set up until one - * of the libc header (that includes <features.h>) is included. This creates - * a circular dependency when we check the macros. <assert.h> is the safest - * header we can include and does not declare too many functions we don't need. - */ -#if !defined(__GNU_LIBRARY__) && defined(__STDC__) -#include <assert.h> -#endif -#if !(defined(_POSIX_C_SOURCE) || defined(_XOPEN_SOURCE) || \ - defined(_POSIX_SOURCE)) -# define _POSIX_C_SOURCE 1 /* Required for fileno() */ -# define _POSIX_SOURCE 1 -#endif]])]]) -#include <stdio.h> -#include <string.h> -#include <errno.h> -#include <stdlib.h> -%endif - -%if-tables-serialization -#include <sys/types.h> -#include <netinet/in.h> -%endif -/* end standard C headers. */ - -/* begin standard C++ headers. */ -%if-c++-only -#include <iostream> -#include <errno.h> -#include <cstdlib> -#include <cstdio> -#include <cstring> -/* end standard C++ headers. */ -%endif - -%if-c-or-c++ -m4preproc_include(`flexint_shared.h') -%endif - -/* TODO: this is always defined, so inline it */ -#define yyconst const - -#if defined(__GNUC__) && __GNUC__ >= 3 -#define yynoreturn __attribute__((__noreturn__)) -#else -#define yynoreturn -#endif - -%not-for-header -/* Returned upon end-of-file. */ -#define YY_NULL 0 -%ok-for-header - -%not-for-header -/* Promotes a possibly negative, possibly signed char to an - * integer in range [0..255] for use as an array index. - */ -#define YY_SC_TO_UI(c) ((YY_CHAR) (c)) -%ok-for-header - - - -%if-reentrant - -/* An opaque pointer. */ -#ifndef YY_TYPEDEF_YY_SCANNER_T -#define YY_TYPEDEF_YY_SCANNER_T -typedef void* yyscan_t; -#endif - -%# Declare yyguts variable -m4_define( [[M4_YY_DECL_GUTS_VAR]], [[struct yyguts_t * yyg = (struct yyguts_t*)yyscanner]]) -%# Perform a noop access on yyguts to prevent unused variable complains -m4_define( [[M4_YY_NOOP_GUTS_VAR]], [[(void)yyg]]) -%# For use wherever a Global is accessed or assigned. -m4_define( [[YY_G]], [[yyg->$1]]) - -%# For use in function prototypes to append the additional argument. -m4_define( [[M4_YY_PROTO_LAST_ARG]], [[, yyscan_t yyscanner]]) -m4_define( [[M4_YY_PROTO_ONLY_ARG]], [[yyscan_t yyscanner]]) - -m4_define( [[M4_YY_DEF_LAST_ARG]], [[, yyscan_t yyscanner]]) -m4_define( [[M4_YY_DEF_ONLY_ARG]], [[yyscan_t yyscanner]]) -m4_define( [[M4_YY_DECL_LAST_ARG]], [[yyscan_t yyscanner;]]) - -%# For use in function calls to pass the additional argument. -m4_define( [[M4_YY_CALL_LAST_ARG]], [[, yyscanner]]) -m4_define( [[M4_YY_CALL_ONLY_ARG]], [[yyscanner]]) - -%# For use in function documentation to adjust for additional argument. -m4_define( [[M4_YY_DOC_PARAM]], [[@param yyscanner The scanner object.]]) - -/* For convenience, these vars (plus the bison vars far below) - are macros in the reentrant scanner. */ -#define yyin YY_G(yyin_r) -#define yyout YY_G(yyout_r) -#define yyextra YY_G(yyextra_r) -#define yyleng YY_G(yyleng_r) -#define yytext YY_G(yytext_r) -#define yylineno (YY_CURRENT_BUFFER_LVALUE->yy_bs_lineno) -#define yycolumn (YY_CURRENT_BUFFER_LVALUE->yy_bs_column) -#define yy_flex_debug YY_G(yy_flex_debug_r) - -m4_define( [[M4_YY_INCR_LINENO]], -[[ - do{ yylineno++; - yycolumn=0; - }while(0) -]]) - -%endif - - - -%if-not-reentrant - -m4_define( [[M4_YY_INCR_LINENO]], -[[ - yylineno++; -]]) - -%# Define these macros to be no-ops. -m4_define( [[M4_YY_DECL_GUTS_VAR]], [[m4_dnl]]) -m4_define( [[M4_YY_NOOP_GUTS_VAR]], [[m4_dnl]]) -m4_define( [[YY_G]], [[($1)]]) -m4_define( [[M4_YY_PROTO_LAST_ARG]]) -m4_define( [[M4_YY_PROTO_ONLY_ARG]], [[void]]) -m4_define( [[M4_YY_DEF_LAST_ARG]]) - -m4_define( [[M4_YY_DEF_ONLY_ARG]], [[void]]) -m4_define([[M4_YY_DECL_LAST_ARG]]) -m4_define([[M4_YY_CALL_LAST_ARG]]) -m4_define([[M4_YY_CALL_ONLY_ARG]]) -m4_define( [[M4_YY_DOC_PARAM]], ) - -%endif - - -%# Generate C99 function defs. -m4_define( [[YYFARGS1]], [[($1 $2 M4_YY_DEF_LAST_ARG)]]) -m4_define( [[YYFARGS2]], [[($1 $2, $3 $4 M4_YY_DEF_LAST_ARG)]]) -m4_define( [[YYFARGS3]], [[($1 $2, $3 $4, $5 $6 M4_YY_DEF_LAST_ARG)]]) - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* Enter a start condition. This macro really ought to take a parameter, - * but we do it the disgusting crufty way forced on us by the ()-less - * definition of BEGIN. - */ -#define BEGIN YY_G(yy_start) = 1 + 2 * -/* Translate the current start state into a value that can be later handed - * to BEGIN to return to the state. The YYSTATE alias is for lex - * compatibility. - */ -#define YY_START ((YY_G(yy_start) - 1) / 2) -#define YYSTATE YY_START -/* Action number for EOF rule of a given start state. */ -#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) -/* Special action meaning "start processing a new file". */ -#define YY_NEW_FILE yyrestart( yyin M4_YY_CALL_LAST_ARG ) -#define YY_END_OF_BUFFER_CHAR 0 -]]) - -/* Size of default input buffer. */ -#ifndef YY_BUF_SIZE -#ifdef __ia64__ -/* On IA-64, the buffer size is 16k, not 8k. - * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. - * Ditto for the __ia64__ case accordingly. - */ -#define YY_BUF_SIZE 32768 -#else -#define YY_BUF_SIZE 16384 -#endif /* __ia64__ */ -#endif - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* The state buf must be large enough to hold one state per character in the main buffer. - */ -#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) -]]) - - -#ifndef YY_TYPEDEF_YY_BUFFER_STATE -#define YY_TYPEDEF_YY_BUFFER_STATE -typedef struct yy_buffer_state *YY_BUFFER_STATE; -#endif - -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - -%if-not-reentrant -extern int yyleng; -%endif - -%if-c-only -%if-not-reentrant -extern FILE *yyin, *yyout; -%endif -%endif - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -#define EOB_ACT_CONTINUE_SCAN 0 -#define EOB_ACT_END_OF_FILE 1 -#define EOB_ACT_LAST_MATCH 2 - m4_ifdef( [[M4_YY_USE_LINENO]], - [[ - /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires - * access to the local variable yy_act. Since yyless() is a macro, it would break - * existing scanners that call yyless() from OUTSIDE yylex. - * One obvious solution it to make yy_act a global. I tried that, and saw - * a 5% performance hit in a non-yylineno scanner, because yy_act is - * normally declared as a register variable-- so it is not worth it. - */ - #define YY_LESS_LINENO(n) \ - do { \ - int yyl;\ - for ( yyl = n; yyl < yyleng; ++yyl )\ - if ( yytext[yyl] == '\n' )\ - --yylineno;\ - }while(0) - #define YY_LINENO_REWIND_TO(dst) \ - do {\ - const char *p;\ - for ( p = yy_cp-1; p >= (dst); --p)\ - if ( *p == '\n' )\ - --yylineno;\ - }while(0) - ]], - [[ - #define YY_LESS_LINENO(n) - #define YY_LINENO_REWIND_TO(ptr) - ]]) -/* Return all but the first "n" matched characters back to the input stream. */ -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - *yy_cp = YY_G(yy_hold_char); \ - YY_RESTORE_YY_MORE_OFFSET \ - YY_G(yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ - YY_DO_BEFORE_ACTION; /* set up yytext again */ \ - } \ - while ( 0 ) -#define unput(c) yyunput( c, YY_G(yytext_ptr) M4_YY_CALL_LAST_ARG ) -]]) - -#ifndef YY_STRUCT_YY_BUFFER_STATE -#define YY_STRUCT_YY_BUFFER_STATE -struct yy_buffer_state - { -%if-c-only - FILE *yy_input_file; -%endif - -%if-c++-only - std::streambuf* yy_input_file; -%endif - - - char *yy_ch_buf; /* input buffer */ - char *yy_buf_pos; /* current position in input buffer */ - - /* Size of input buffer in bytes, not including room for EOB - * characters. - */ - int yy_buf_size; - - /* Number of characters read into yy_ch_buf, not including EOB - * characters. - */ - int yy_n_chars; - - /* Whether we "own" the buffer - i.e., we know we created it, - * and can realloc() it to grow it, and should free() it to - * delete it. - */ - int yy_is_our_buffer; - - /* Whether this is an "interactive" input source; if so, and - * if we're using stdio for input, then we want to use getc() - * instead of fread(), to make sure we stop fetching input after - * each newline. - */ - int yy_is_interactive; - - /* Whether we're considered to be at the beginning of a line. - * If so, '^' rules will be active on the next match, otherwise - * not. - */ - int yy_at_bol; - - int yy_bs_lineno; /**< The line count. */ - int yy_bs_column; /**< The column count. */ - - - /* Whether to try to fill the input buffer when we reach the - * end of it. - */ - int yy_fill_buffer; - - int yy_buffer_status; -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -#define YY_BUFFER_NEW 0 -#define YY_BUFFER_NORMAL 1 - /* When an EOF's been seen but there's still some text to process - * then we mark the buffer as YY_EOF_PENDING, to indicate that we - * shouldn't try reading from the input source any more. We might - * still have a bunch of tokens to match, though, because of - * possible backing-up. - * - * When we actually see the EOF, we change the status to "new" - * (via yyrestart()), so that the user can continue scanning by - * just pointing yyin at a new input file. - */ -#define YY_BUFFER_EOF_PENDING 2 -]]) - }; -#endif /* !YY_STRUCT_YY_BUFFER_STATE */ - -%if-c-only Standard (non-C++) definition -%not-for-header -%if-not-reentrant - -/* Stack of input buffers. */ -static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ -static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ -static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ -%endif -%ok-for-header -%endif - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* We provide macros for accessing buffer states in case in the - * future we want to put the buffer states in a more general - * "scanner state". - * - * Returns the top of the stack, or NULL. - */ -#define YY_CURRENT_BUFFER ( YY_G(yy_buffer_stack) \ - ? YY_G(yy_buffer_stack)[YY_G(yy_buffer_stack_top)] \ - : NULL) -/* Same as previous macro, but useful when we know that the buffer stack is not - * NULL or when we need an lvalue. For internal use only. - */ -#define YY_CURRENT_BUFFER_LVALUE YY_G(yy_buffer_stack)[YY_G(yy_buffer_stack_top)] -]]) - -%if-c-only Standard (non-C++) definition - -%if-not-reentrant -%not-for-header -/* yy_hold_char holds the character lost when yytext is formed. */ -static char yy_hold_char; -static int yy_n_chars; /* number of characters read into yy_ch_buf */ -int yyleng; - -/* Points to current character in buffer. */ -static char *yy_c_buf_p = NULL; -static int yy_init = 0; /* whether we need to initialize */ -static int yy_start = 0; /* start state number */ - -/* Flag which is used to allow yywrap()'s to do buffer switches - * instead of setting up a fresh yyin. A bit of a hack ... - */ -static int yy_did_buffer_switch_on_eof; -%ok-for-header -%endif - -void yyrestart ( FILE *input_file M4_YY_PROTO_LAST_ARG ); -void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer M4_YY_PROTO_LAST_ARG ); -YY_BUFFER_STATE yy_create_buffer ( FILE *file, int size M4_YY_PROTO_LAST_ARG ); -void yy_delete_buffer ( YY_BUFFER_STATE b M4_YY_PROTO_LAST_ARG ); -void yy_flush_buffer ( YY_BUFFER_STATE b M4_YY_PROTO_LAST_ARG ); -void yypush_buffer_state ( YY_BUFFER_STATE new_buffer M4_YY_PROTO_LAST_ARG ); -void yypop_buffer_state ( M4_YY_PROTO_ONLY_ARG ); - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -static void yyensure_buffer_stack ( M4_YY_PROTO_ONLY_ARG ); -static void yy_load_buffer_state ( M4_YY_PROTO_ONLY_ARG ); -static void yy_init_buffer ( YY_BUFFER_STATE b, FILE *file M4_YY_PROTO_LAST_ARG ); -#define YY_FLUSH_BUFFER yy_flush_buffer( YY_CURRENT_BUFFER M4_YY_CALL_LAST_ARG) -]]) - -YY_BUFFER_STATE yy_scan_buffer ( char *base, yy_size_t size M4_YY_PROTO_LAST_ARG ); -YY_BUFFER_STATE yy_scan_string ( const char *yy_str M4_YY_PROTO_LAST_ARG ); -YY_BUFFER_STATE yy_scan_bytes ( const char *bytes, int len M4_YY_PROTO_LAST_ARG ); - -%endif - -void *yyalloc ( yy_size_t M4_YY_PROTO_LAST_ARG ); -void *yyrealloc ( void *, yy_size_t M4_YY_PROTO_LAST_ARG ); -void yyfree ( void * M4_YY_PROTO_LAST_ARG ); - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -#define yy_new_buffer yy_create_buffer -#define yy_set_interactive(is_interactive) \ - { \ - if ( ! YY_CURRENT_BUFFER ){ \ - yyensure_buffer_stack (M4_YY_CALL_ONLY_ARG); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer( yyin, YY_BUF_SIZE M4_YY_CALL_LAST_ARG); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ - } -#define yy_set_bol(at_bol) \ - { \ - if ( ! YY_CURRENT_BUFFER ){\ - yyensure_buffer_stack (M4_YY_CALL_ONLY_ARG); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer( yyin, YY_BUF_SIZE M4_YY_CALL_LAST_ARG); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ - } -#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) -]]) - -%% [1.0] yytext/yyin/yyout/yy_state_type/yylineno etc. def's & init go here - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -%% [1.5] DFA -]]) - -%if-c-only Standard (non-C++) definition - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -static yy_state_type yy_get_previous_state ( M4_YY_PROTO_ONLY_ARG ); -static yy_state_type yy_try_NUL_trans ( yy_state_type current_state M4_YY_PROTO_LAST_ARG); -static int yy_get_next_buffer ( M4_YY_PROTO_ONLY_ARG ); -static void yynoreturn yy_fatal_error ( const char* msg M4_YY_PROTO_LAST_ARG ); -]]) - -%endif - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* Done after the current pattern has been matched and before the - * corresponding action - sets up yytext. - */ -#define YY_DO_BEFORE_ACTION \ - YY_G(yytext_ptr) = yy_bp; \ -%% [2.0] code to fiddle yytext and yyleng for yymore() goes here \ - YY_G(yy_hold_char) = *yy_cp; \ - *yy_cp = '\0'; \ -%% [3.0] code to copy yytext_ptr to yytext[] goes here, if %array \ - YY_G(yy_c_buf_p) = yy_cp; -%% [4.0] data tables for the DFA and the user's section 1 definitions go here -]]) - -m4_ifdef( [[M4_YY_IN_HEADER]], [[#ifdef YY_HEADER_EXPORT_START_CONDITIONS]]) -M4_YY_SC_DEFS -m4_ifdef( [[M4_YY_IN_HEADER]], [[#endif]]) - -m4_ifdef( [[M4_YY_NO_UNISTD_H]],, -[[ -#ifndef YY_NO_UNISTD_H -/* Special case for "unistd.h", since it is non-ANSI. We include it way - * down here because we want the user's section 1 to have been scanned first. - * The user has a chance to override it with an option. - */ -%if-c-only -#include <unistd.h> -%endif -%if-c++-only -#include <unistd.h> -%endif -#endif -]]) - -m4_ifdef( [[M4_EXTRA_TYPE_DEFS]], -[[ -#define YY_EXTRA_TYPE M4_EXTRA_TYPE_DEFS -]], -[[ -#ifndef YY_EXTRA_TYPE -#define YY_EXTRA_TYPE void * -#endif -]] -) - -%if-c-only Reentrant structure and macros (non-C++). -%if-reentrant - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* Holds the entire state of the reentrant scanner. */ -struct yyguts_t - { - - /* User-defined. Not touched by flex. */ - YY_EXTRA_TYPE yyextra_r; - - /* The rest are the same as the globals declared in the non-reentrant scanner. */ - FILE *yyin_r, *yyout_r; - size_t yy_buffer_stack_top; /**< index of top of stack. */ - size_t yy_buffer_stack_max; /**< capacity of stack. */ - YY_BUFFER_STATE * yy_buffer_stack; /**< Stack as an array. */ - char yy_hold_char; - int yy_n_chars; - int yyleng_r; - char *yy_c_buf_p; - int yy_init; - int yy_start; - int yy_did_buffer_switch_on_eof; - int yy_start_stack_ptr; - int yy_start_stack_depth; - int *yy_start_stack; - yy_state_type yy_last_accepting_state; - char* yy_last_accepting_cpos; - - int yylineno_r; - int yy_flex_debug_r; - -m4_ifdef( [[M4_YY_USES_REJECT]], -[[ - yy_state_type *yy_state_buf; - yy_state_type *yy_state_ptr; - char *yy_full_match; - int yy_lp; - - /* These are only needed for trailing context rules, - * but there's no conditional variable for that yet. */ - int yy_looking_for_trail_begin; - int yy_full_lp; - int *yy_full_state; -]]) - -m4_ifdef( [[M4_YY_TEXT_IS_ARRAY]], -[[ - char yytext_r[YYLMAX]; - char *yytext_ptr; - int yy_more_offset; - int yy_prev_more_offset; -]], -[[ - char *yytext_r; - int yy_more_flag; - int yy_more_len; -]]) - -m4_ifdef( [[M4_YY_BISON_LVAL]], -[[ - YYSTYPE * yylval_r; -]]) - -m4_ifdef( [[<M4_YY_BISON_LLOC>]], -[[ - YYLTYPE * yylloc_r; -]]) - - }; /* end struct yyguts_t */ -]]) - - -%if-c-only -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -static int yy_init_globals ( M4_YY_PROTO_ONLY_ARG ); -]]) -%endif - -%if-reentrant - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ - m4_ifdef( [[M4_YY_BISON_LVAL]], - [[ - /* This must go here because YYSTYPE and YYLTYPE are included - * from bison output in section 1.*/ - # define yylval YY_G(yylval_r) - ]]) - - m4_ifdef( [[<M4_YY_BISON_LLOC>]], - [[ - # define yylloc YY_G(yylloc_r) - ]]) -]]) - -int yylex_init (yyscan_t* scanner); - -int yylex_init_extra ( YY_EXTRA_TYPE user_defined, yyscan_t* scanner); - -%endif - -%endif End reentrant structures and macros. - -/* Accessor methods to globals. - These are made visible to non-reentrant scanners for convenience. */ - -m4_ifdef( [[M4_YY_NO_DESTROY]],, -[[ -int yylex_destroy ( M4_YY_PROTO_ONLY_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_GET_DEBUG]],, -[[ -int yyget_debug ( M4_YY_PROTO_ONLY_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_SET_DEBUG]],, -[[ -void yyset_debug ( int debug_flag M4_YY_PROTO_LAST_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_GET_EXTRA]],, -[[ -YY_EXTRA_TYPE yyget_extra ( M4_YY_PROTO_ONLY_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_SET_EXTRA]],, -[[ -void yyset_extra ( YY_EXTRA_TYPE user_defined M4_YY_PROTO_LAST_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_GET_IN]],, -[[ -FILE *yyget_in ( M4_YY_PROTO_ONLY_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_SET_IN]],, -[[ -void yyset_in ( FILE * _in_str M4_YY_PROTO_LAST_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_GET_OUT]],, -[[ -FILE *yyget_out ( M4_YY_PROTO_ONLY_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_SET_OUT]],, -[[ -void yyset_out ( FILE * _out_str M4_YY_PROTO_LAST_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_GET_LENG]],, -[[ - int yyget_leng ( M4_YY_PROTO_ONLY_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_GET_TEXT]],, -[[ -char *yyget_text ( M4_YY_PROTO_ONLY_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_GET_LINENO]],, -[[ -int yyget_lineno ( M4_YY_PROTO_ONLY_ARG ); -]]) - -m4_ifdef( [[M4_YY_NO_SET_LINENO]],, -[[ -void yyset_lineno ( int _line_number M4_YY_PROTO_LAST_ARG ); -]]) - -m4_ifdef( [[M4_YY_REENTRANT]], -[[ -m4_ifdef( [[M4_YY_NO_GET_COLUMN]],, -[[ -int yyget_column ( M4_YY_PROTO_ONLY_ARG ); -]]) -]]) - -m4_ifdef( [[M4_YY_REENTRANT]], -[[ -m4_ifdef( [[M4_YY_NO_SET_COLUMN]],, -[[ -void yyset_column ( int _column_no M4_YY_PROTO_LAST_ARG ); -]]) -]]) - -%if-bison-bridge -m4_ifdef( [[M4_YY_NO_GET_LVAL]],, -[[ -YYSTYPE * yyget_lval ( M4_YY_PROTO_ONLY_ARG ); -]]) - -void yyset_lval ( YYSTYPE * yylval_param M4_YY_PROTO_LAST_ARG ); - -m4_ifdef( [[<M4_YY_BISON_LLOC>]], -[[ - m4_ifdef( [[M4_YY_NO_GET_LLOC]],, - [[ - YYLTYPE *yyget_lloc ( M4_YY_PROTO_ONLY_ARG ); - ]]) - - m4_ifdef( [[M4_YY_NO_SET_LLOC]],, - [[ - void yyset_lloc ( YYLTYPE * yylloc_param M4_YY_PROTO_LAST_ARG ); - ]]) -]]) -%endif - -/* Macros after this point can all be overridden by user definitions in - * section 1. - */ - -#ifndef YY_SKIP_YYWRAP -#ifdef __cplusplus -extern "C" int yywrap ( M4_YY_PROTO_ONLY_ARG ); -#else -extern int yywrap ( M4_YY_PROTO_ONLY_ARG ); -#endif -#endif - -%not-for-header -#ifndef YY_NO_UNPUT - m4_ifdef( [[M4_YY_NO_UNPUT]],, - [[ - static void yyunput ( int c, char *buf_ptr M4_YY_PROTO_LAST_ARG); - ]]) -#endif -%ok-for-header -%endif - -#ifndef yytext_ptr -static void yy_flex_strncpy ( char *, const char *, int M4_YY_PROTO_LAST_ARG); -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen ( const char * M4_YY_PROTO_LAST_ARG); -#endif - -#ifndef YY_NO_INPUT -%if-c-only Standard (non-C++) definition -%not-for-header -#ifdef __cplusplus -static int yyinput ( M4_YY_PROTO_ONLY_ARG ); -#else -static int input ( M4_YY_PROTO_ONLY_ARG ); -#endif -%ok-for-header -%endif -#endif - - -%if-c-only -%# TODO: This is messy. -m4_ifdef( [[M4_YY_STACK_USED]], -[[ - -m4_ifdef( [[M4_YY_NOT_REENTRANT]], -[[ - m4_ifdef( [[M4_YY_NOT_IN_HEADER]], - [[ - static int yy_start_stack_ptr = 0; - static int yy_start_stack_depth = 0; - static int *yy_start_stack = NULL; - ]]) -]]) - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ - m4_ifdef( [[M4_YY_NO_PUSH_STATE]],, - [[ - static void yy_push_state ( int _new_state M4_YY_PROTO_LAST_ARG); - ]]) - m4_ifdef( [[M4_YY_NO_POP_STATE]],, - [[ - static void yy_pop_state ( M4_YY_PROTO_ONLY_ARG ); - ]]) - m4_ifdef( [[M4_YY_NO_TOP_STATE]],, - [[ - static int yy_top_state ( M4_YY_PROTO_ONLY_ARG ); - ]]) -]]) - -]], -[[ -m4_define( [[M4_YY_NO_PUSH_STATE]]) -m4_define( [[M4_YY_NO_POP_STATE]]) -m4_define( [[M4_YY_NO_TOP_STATE]]) -]]) -%endif - -/* Amount of stuff to slurp up with each read. */ -#ifndef YY_READ_BUF_SIZE -#ifdef __ia64__ -/* On IA-64, the buffer size is 16k, not 8k */ -#define YY_READ_BUF_SIZE 16384 -#else -#define YY_READ_BUF_SIZE 8192 -#endif /* __ia64__ */ -#endif - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* Copy whatever the last rule matched to the standard output. */ -#ifndef ECHO -%if-c-only Standard (non-C++) definition -/* This used to be an fputs(), but since the string might contain NUL's, - * we now use fwrite(). - */ -#define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) -%endif -%if-c++-only C++ definition -#define ECHO LexerOutput( yytext, yyleng ) -%endif -#endif -]]) - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, - * is returned in "result". - */ -#ifndef YY_INPUT -#define YY_INPUT(buf,result,max_size) \ -%% [5.0] fread()/read() definition of YY_INPUT goes here unless we're doing C++ \ -\ -%if-c++-only C++ definition \ - if ( (int)(result = LexerInput( (char *) buf, max_size )) < 0 ) \ - YY_FATAL_ERROR( "input in flex scanner failed" ); -%endif - -#endif -]]) - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* No semi-colon after return; correct usage is to write "yyterminate();" - - * we don't want an extra ';' after the "return" because that will cause - * some compilers to complain about unreachable statements. - */ -#ifndef yyterminate -#define yyterminate() return YY_NULL -#endif -]]) - -/* Number of entries by which start-condition stack grows. */ -#ifndef YY_START_STACK_INCR -#define YY_START_STACK_INCR 25 -#endif - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* Report a fatal error. */ -#ifndef YY_FATAL_ERROR -%if-c-only -#define YY_FATAL_ERROR(msg) yy_fatal_error( msg M4_YY_CALL_LAST_ARG) -%endif -%if-c++-only -#define YY_FATAL_ERROR(msg) LexerError( msg ) -%endif -#endif -]]) - -%if-tables-serialization structures and prototypes -m4preproc_include(`tables_shared.h') - -/* Load the DFA tables from the given stream. */ -int yytables_fload (FILE * fp M4_YY_PROTO_LAST_ARG); - -/* Unload the tables from memory. */ -int yytables_destroy (M4_YY_PROTO_ONLY_ARG); -%not-for-header - -/** Describes a mapping from a serialized table id to its deserialized state in - * this scanner. This is the bridge between our "generic" deserialization code - * and the specifics of this scanner. - */ -struct yytbl_dmap { - enum yytbl_id dm_id;/**< table identifier */ - void **dm_arr; /**< address of pointer to store the deserialized table. */ - size_t dm_sz; /**< local sizeof() each element in table. */ -}; - -/** A {0,0,0}-terminated list of structs, forming the map */ -static struct yytbl_dmap yydmap[] = -{ -%tables-yydmap generated elements - {0,0,0} -}; - -/** A tables-reader object to maintain some state in the read. */ -struct yytbl_reader { - FILE * fp; /**< input stream */ - flex_uint32_t bread; /**< bytes read since beginning of current tableset */ -}; - -%endif -/* end tables serialization structures and prototypes */ - -%ok-for-header - -/* Default declaration of generated scanner - a define so the user can - * easily add parameters. - */ -#ifndef YY_DECL -#define YY_DECL_IS_OURS 1 -%if-c-only Standard (non-C++) definition - - -m4_define( [[M4_YY_LEX_PROTO]], [[(M4_YY_PROTO_ONLY_ARG)]]) -m4_define( [[M4_YY_LEX_DECLARATION]], [[(M4_YY_DEF_ONLY_ARG)]]) - -m4_ifdef( [[M4_YY_BISON_LVAL]], -[[ - m4_dnl The bison pure parser is used. Redefine yylex to - m4_dnl accept the lval parameter. - - m4_define( [[M4_YY_LEX_PROTO]], [[\]] - [[(YYSTYPE * yylval_param M4_YY_PROTO_LAST_ARG)]]) - m4_define( [[M4_YY_LEX_DECLARATION]], [[\]] - [[YYFARGS1(YYSTYPE *,yylval_param)]]) -]]) - -m4_ifdef( [[<M4_YY_BISON_LLOC>]], -[[ - m4_dnl Locations are used. yylex should also accept the ylloc parameter. - - m4_define( [[M4_YY_LEX_PROTO]], [[\]] - [[(YYSTYPE * yylval_param, YYLTYPE * yylloc_param M4_YY_PROTO_LAST_ARG)]]) - m4_define( [[M4_YY_LEX_DECLARATION]], [[\]] - [[YYFARGS2(YYSTYPE *,yylval_param, YYLTYPE *,yylloc_param)]]) -]]) - -extern int yylex M4_YY_LEX_PROTO; - -#define YY_DECL int yylex M4_YY_LEX_DECLARATION -%endif -%if-c++-only C++ definition -#define YY_DECL int yyFlexLexer::yylex() -%endif -#endif /* !YY_DECL */ - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* Code executed at the beginning of each rule, after yytext and yyleng - * have been set up. - */ -#ifndef YY_USER_ACTION -#define YY_USER_ACTION -#endif -]]) - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* Code executed at the end of each rule. */ -#ifndef YY_BREAK -#define YY_BREAK /*LINTED*/break; -#endif -]]) - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -%% [6.0] YY_RULE_SETUP definition goes here -]]) - -%not-for-header -/** The main scanner function which does all the work. - */ -YY_DECL -{ - yy_state_type yy_current_state; - char *yy_cp, *yy_bp; - int yy_act; - M4_YY_DECL_GUTS_VAR(); - -m4_ifdef( [[M4_YY_NOT_REENTRANT]], -[[ - m4_ifdef( [[M4_YY_BISON_LVAL]], - [[ - YYSTYPE * yylval; - ]]) - m4_ifdef( [[<M4_YY_BISON_LLOC>]], - [[ - YYLTYPE * yylloc; - ]]) -]]) - -m4_ifdef( [[M4_YY_BISON_LVAL]], -[[ - yylval = yylval_param; -]]) - -m4_ifdef( [[<M4_YY_BISON_LLOC>]], -[[ - yylloc = yylloc_param; -]]) - - if ( !YY_G(yy_init) ) - { - YY_G(yy_init) = 1; - -#ifdef YY_USER_INIT - YY_USER_INIT; -#endif - -m4_ifdef( [[M4_YY_USES_REJECT]], -[[ - /* Create the reject buffer large enough to save one state per allowed character. */ - if ( ! YY_G(yy_state_buf) ) - YY_G(yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE M4_YY_CALL_LAST_ARG); - if ( ! YY_G(yy_state_buf) ) - YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); -]]) - - if ( ! YY_G(yy_start) ) - YY_G(yy_start) = 1; /* first start state */ - - if ( ! yyin ) -%if-c-only - yyin = stdin; -%endif -%if-c++-only - yyin.rdbuf(std::cin.rdbuf()); -%endif - - if ( ! yyout ) -%if-c-only - yyout = stdout; -%endif -%if-c++-only - yyout.rdbuf(std::cout.rdbuf()); -%endif - - if ( ! YY_CURRENT_BUFFER ) { - yyensure_buffer_stack (M4_YY_CALL_ONLY_ARG); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer( yyin, YY_BUF_SIZE M4_YY_CALL_LAST_ARG); - } - - yy_load_buffer_state( M4_YY_CALL_ONLY_ARG ); - } - - { -%% [7.0] user's declarations go here - - while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ - { -%% [8.0] yymore()-related code goes here - yy_cp = YY_G(yy_c_buf_p); - - /* Support of yytext. */ - *yy_cp = YY_G(yy_hold_char); - - /* yy_bp points to the position in yy_ch_buf of the start of - * the current run. - */ - yy_bp = yy_cp; - -%% [9.0] code to set up and find next match goes here - -yy_find_action: -%% [10.0] code to find the action number goes here - - YY_DO_BEFORE_ACTION; - -%% [11.0] code for yylineno update goes here - -do_action: /* This label is used only to access EOF actions. */ - -%% [12.0] debug code goes here - - switch ( yy_act ) - { /* beginning of action switch */ -%% [13.0] actions go here - - case YY_END_OF_BUFFER: - { - /* Amount of text matched not including the EOB char. */ - int yy_amount_of_matched_text = (int) (yy_cp - YY_G(yytext_ptr)) - 1; - - /* Undo the effects of YY_DO_BEFORE_ACTION. */ - *yy_cp = YY_G(yy_hold_char); - YY_RESTORE_YY_MORE_OFFSET - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) - { - /* We're scanning a new file or input source. It's - * possible that this happened because the user - * just pointed yyin at a new source and called - * yylex(). If so, then we have to assure - * consistency between YY_CURRENT_BUFFER and our - * globals. Here is the right place to do so, because - * this is the first action (other than possibly a - * back-up) that will match for the new input source. - */ - YY_G(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; -%if-c-only - YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; -%endif -%if-c++-only - YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin.rdbuf(); -%endif - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; - } - - /* Note that here we test for yy_c_buf_p "<=" to the position - * of the first EOB in the buffer, since yy_c_buf_p will - * already have been incremented past the NUL character - * (since all states make transitions on EOB to the - * end-of-buffer state). Contrast this with the test - * in input(). - */ - if ( YY_G(yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[YY_G(yy_n_chars)] ) - { /* This was really a NUL. */ - yy_state_type yy_next_state; - - YY_G(yy_c_buf_p) = YY_G(yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( M4_YY_CALL_ONLY_ARG ); - - /* Okay, we're now positioned to make the NUL - * transition. We couldn't have - * yy_get_previous_state() go ahead and do it - * for us because it doesn't know how to deal - * with the possibility of jamming (and we don't - * want to build jamming into it because then it - * will run more slowly). - */ - - yy_next_state = yy_try_NUL_trans( yy_current_state M4_YY_CALL_LAST_ARG); - - yy_bp = YY_G(yytext_ptr) + YY_MORE_ADJ; - - if ( yy_next_state ) - { - /* Consume the NUL. */ - yy_cp = ++YY_G(yy_c_buf_p); - yy_current_state = yy_next_state; - goto yy_match; - } - - else - { -%% [14.0] code to do back-up for compressed tables and set up yy_cp goes here - goto yy_find_action; - } - } - - else switch ( yy_get_next_buffer( M4_YY_CALL_ONLY_ARG ) ) - { - case EOB_ACT_END_OF_FILE: - { - YY_G(yy_did_buffer_switch_on_eof) = 0; - - if ( yywrap( M4_YY_CALL_ONLY_ARG ) ) - { - /* Note: because we've taken care in - * yy_get_next_buffer() to have set up - * yytext, we can now set up - * yy_c_buf_p so that if some total - * hoser (like flex itself) wants to - * call the scanner after we return the - * YY_NULL, it'll still work - another - * YY_NULL will get returned. - */ - YY_G(yy_c_buf_p) = YY_G(yytext_ptr) + YY_MORE_ADJ; - - yy_act = YY_STATE_EOF(YY_START); - goto do_action; - } - - else - { - if ( ! YY_G(yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; - } - break; - } - - case EOB_ACT_CONTINUE_SCAN: - YY_G(yy_c_buf_p) = - YY_G(yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( M4_YY_CALL_ONLY_ARG ); - - yy_cp = YY_G(yy_c_buf_p); - yy_bp = YY_G(yytext_ptr) + YY_MORE_ADJ; - goto yy_match; - - case EOB_ACT_LAST_MATCH: - YY_G(yy_c_buf_p) = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[YY_G(yy_n_chars)]; - - yy_current_state = yy_get_previous_state( M4_YY_CALL_ONLY_ARG ); - - yy_cp = YY_G(yy_c_buf_p); - yy_bp = YY_G(yytext_ptr) + YY_MORE_ADJ; - goto yy_find_action; - } - break; - } - - default: - YY_FATAL_ERROR( - "fatal flex scanner internal error--no action found" ); - } /* end of action switch */ - } /* end of scanning one token */ - } /* end of user's declarations */ -} /* end of yylex */ -%ok-for-header - -%if-c++-only -%not-for-header -/* The contents of this function are C++ specific, so the YY_G macro is not used. - * This constructor simply maintains backward compatibility. - * DEPRECATED - */ -yyFlexLexer::yyFlexLexer( std::istream* arg_yyin, std::ostream* arg_yyout ): - yyin(arg_yyin ? arg_yyin->rdbuf() : std::cin.rdbuf()), - yyout(arg_yyout ? arg_yyout->rdbuf() : std::cout.rdbuf()) -{ - ctor_common(); -} - -/* The contents of this function are C++ specific, so the YY_G macro is not used. - */ -yyFlexLexer::yyFlexLexer( std::istream& arg_yyin, std::ostream& arg_yyout ): - yyin(arg_yyin.rdbuf()), - yyout(arg_yyout.rdbuf()) -{ - ctor_common(); -} - -/* The contents of this function are C++ specific, so the YY_G macro is not used. - */ -void yyFlexLexer::ctor_common() -{ - yy_c_buf_p = 0; - yy_init = 0; - yy_start = 0; - yy_flex_debug = 0; - yylineno = 1; // this will only get updated if %option yylineno - - yy_did_buffer_switch_on_eof = 0; - - yy_looking_for_trail_begin = 0; - yy_more_flag = 0; - yy_more_len = 0; - yy_more_offset = yy_prev_more_offset = 0; - - yy_start_stack_ptr = yy_start_stack_depth = 0; - yy_start_stack = NULL; - - yy_buffer_stack = NULL; - yy_buffer_stack_top = 0; - yy_buffer_stack_max = 0; - - -m4_ifdef( [[M4_YY_USES_REJECT]], -[[ - yy_state_buf = new yy_state_type[YY_STATE_BUF_SIZE]; -]], -[[ - yy_state_buf = 0; -]]) -} - -/* The contents of this function are C++ specific, so the YY_G macro is not used. - */ -yyFlexLexer::~yyFlexLexer() -{ - delete [] yy_state_buf; - yyfree( yy_start_stack M4_YY_CALL_LAST_ARG ); - yy_delete_buffer( YY_CURRENT_BUFFER M4_YY_CALL_LAST_ARG); - yyfree( yy_buffer_stack M4_YY_CALL_LAST_ARG ); -} - -/* The contents of this function are C++ specific, so the YY_G macro is not used. - */ -void yyFlexLexer::switch_streams( std::istream& new_in, std::ostream& new_out ) -{ - // was if( new_in ) - yy_delete_buffer( YY_CURRENT_BUFFER M4_YY_CALL_LAST_ARG); - yy_switch_to_buffer( yy_create_buffer( new_in, YY_BUF_SIZE M4_YY_CALL_LAST_ARG) M4_YY_CALL_LAST_ARG); - - // was if( new_out ) - yyout.rdbuf(new_out.rdbuf()); -} - -/* The contents of this function are C++ specific, so the YY_G macro is not used. - */ -void yyFlexLexer::switch_streams( std::istream* new_in, std::ostream* new_out ) -{ - if( ! new_in ) { - new_in = &yyin; - } - - if ( ! new_out ) { - new_out = &yyout; - } - - switch_streams(*new_in, *new_out); -} - -#ifdef YY_INTERACTIVE -int yyFlexLexer::LexerInput( char* buf, int /* max_size */ ) -#else -int yyFlexLexer::LexerInput( char* buf, int max_size ) -#endif -{ - if ( yyin.eof() || yyin.fail() ) - return 0; - -#ifdef YY_INTERACTIVE - yyin.get( buf[0] ); - - if ( yyin.eof() ) - return 0; - - if ( yyin.bad() ) - return -1; - - return 1; - -#else - (void) yyin.read( buf, max_size ); - - if ( yyin.bad() ) - return -1; - else - return yyin.gcount(); -#endif -} - -void yyFlexLexer::LexerOutput( const char* buf, int size ) -{ - (void) yyout.write( buf, size ); -} -%ok-for-header -%endif - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* yy_get_next_buffer - try to read in a new buffer - * - * Returns a code representing an action: - * EOB_ACT_LAST_MATCH - - * EOB_ACT_CONTINUE_SCAN - continue scanning from current position - * EOB_ACT_END_OF_FILE - end of file - */ -%if-c-only -static int yy_get_next_buffer (M4_YY_DEF_ONLY_ARG) -%endif -%if-c++-only -int yyFlexLexer::yy_get_next_buffer() -%endif -{ - M4_YY_DECL_GUTS_VAR(); - char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; - char *source = YY_G(yytext_ptr); - int number_to_move, i; - int ret_val; - - if ( YY_G(yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[YY_G(yy_n_chars) + 1] ) - YY_FATAL_ERROR( - "fatal flex scanner internal error--end of buffer missed" ); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) - { /* Don't try to fill the buffer, so this is an EOF. */ - if ( YY_G(yy_c_buf_p) - YY_G(yytext_ptr) - YY_MORE_ADJ == 1 ) - { - /* We matched a single character, the EOB, so - * treat this as a final EOF. - */ - return EOB_ACT_END_OF_FILE; - } - - else - { - /* We matched some text prior to the EOB, first - * process it. - */ - return EOB_ACT_LAST_MATCH; - } - } - - /* Try to read more data. */ - - /* First move last chars to start of buffer. */ - number_to_move = (int) (YY_G(yy_c_buf_p) - YY_G(yytext_ptr) - 1); - - for ( i = 0; i < number_to_move; ++i ) - *(dest++) = *(source++); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) - /* don't do the read, it's not guaranteed to return an EOF, - * just force an EOF - */ - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = YY_G(yy_n_chars) = 0; - - else - { - int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) - { /* Not enough room in the buffer - grow it. */ -m4_ifdef( [[M4_YY_USES_REJECT]], -[[ - YY_FATAL_ERROR( -"input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); -]], -[[ - /* just a shorter name for the current buffer */ - YY_BUFFER_STATE b = YY_CURRENT_BUFFER_LVALUE; - - int yy_c_buf_p_offset = - (int) (YY_G(yy_c_buf_p) - b->yy_ch_buf); - - if ( b->yy_is_our_buffer ) - { - int new_size = b->yy_buf_size * 2; - - if ( new_size <= 0 ) - b->yy_buf_size += b->yy_buf_size / 8; - else - b->yy_buf_size *= 2; - - b->yy_ch_buf = (char *) - /* Include room in for 2 EOB chars. */ - yyrealloc( (void *) b->yy_ch_buf, - (yy_size_t) (b->yy_buf_size + 2) M4_YY_CALL_LAST_ARG ); - } - else - /* Can't grow it, we don't own it. */ - b->yy_ch_buf = NULL; - - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( - "fatal error - scanner input buffer overflow" ); - - YY_G(yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; - - num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - - number_to_move - 1; -]]) - } - - if ( num_to_read > YY_READ_BUF_SIZE ) - num_to_read = YY_READ_BUF_SIZE; - - /* Read in more data. */ - YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), - YY_G(yy_n_chars), num_to_read ); - - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = YY_G(yy_n_chars); - } - - if ( YY_G(yy_n_chars) == 0 ) - { - if ( number_to_move == YY_MORE_ADJ ) - { - ret_val = EOB_ACT_END_OF_FILE; - yyrestart( yyin M4_YY_CALL_LAST_ARG); - } - - else - { - ret_val = EOB_ACT_LAST_MATCH; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = - YY_BUFFER_EOF_PENDING; - } - } - - else - ret_val = EOB_ACT_CONTINUE_SCAN; - - if ((YY_G(yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { - /* Extend the array by 50%, plus the number we really need. */ - int new_size = YY_G(yy_n_chars) + number_to_move + (YY_G(yy_n_chars) >> 1); - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc( - (void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf, (yy_size_t) new_size M4_YY_CALL_LAST_ARG ); - if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); - /* "- 2" to take care of EOB's */ - YY_CURRENT_BUFFER_LVALUE->yy_buf_size = (int) (new_size - 2); - } - - YY_G(yy_n_chars) += number_to_move; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[YY_G(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[YY_G(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; - - YY_G(yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; - - return ret_val; -} -]]) - -/* yy_get_previous_state - get the state just before the EOB char was reached */ - -%if-c-only -%not-for-header - static yy_state_type yy_get_previous_state (M4_YY_DEF_ONLY_ARG) -%endif -%if-c++-only - yy_state_type yyFlexLexer::yy_get_previous_state() -%endif -{ - yy_state_type yy_current_state; - char *yy_cp; - M4_YY_DECL_GUTS_VAR(); - -%% [15.0] code to get the start state into yy_current_state goes here - - for ( yy_cp = YY_G(yytext_ptr) + YY_MORE_ADJ; yy_cp < YY_G(yy_c_buf_p); ++yy_cp ) - { -%% [16.0] code to find the next state goes here - } - - return yy_current_state; -} - - -/* yy_try_NUL_trans - try to make a transition on the NUL character - * - * synopsis - * next_state = yy_try_NUL_trans( current_state ); - */ -%if-c-only - static yy_state_type yy_try_NUL_trans YYFARGS1( yy_state_type, yy_current_state) -%endif -%if-c++-only - yy_state_type yyFlexLexer::yy_try_NUL_trans( yy_state_type yy_current_state ) -%endif -{ - int yy_is_jam; - M4_YY_DECL_GUTS_VAR(); /* This var may be unused depending upon options. */ -%% [17.0] code to find the next state, and perhaps do backing up, goes here - - M4_YY_NOOP_GUTS_VAR(); -return yy_is_jam ? 0 : yy_current_state; -} - - -#ifndef YY_NO_UNPUT -%if-c-only -m4_ifdef( [[M4_YY_NO_UNPUT]],, -[[ - static void yyunput YYFARGS2( int,c, char *,yy_bp) -%endif -%if-c++-only - void yyFlexLexer::yyunput( int c, char* yy_bp) -%endif -{ - char *yy_cp; - M4_YY_DECL_GUTS_VAR(); - - yy_cp = YY_G(yy_c_buf_p); - - /* undo effects of setting up yytext */ - *yy_cp = YY_G(yy_hold_char); - - if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) - { /* need to shift things up to make room */ - /* +2 for EOB chars. */ - int number_to_move = YY_G(yy_n_chars) + 2; - char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ - YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; - char *source = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; - - while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - *--dest = *--source; - - yy_cp += (int) (dest - source); - yy_bp += (int) (dest - source); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = - YY_G(yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; - - if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) - YY_FATAL_ERROR( "flex scanner push-back overflow" ); - } - - *--yy_cp = (char) c; - -%% [18.0] update yylineno here -m4_ifdef( [[M4_YY_USE_LINENO]], -[[ - if ( c == '\n' ){ - --yylineno; - } -]]) - - YY_G(yytext_ptr) = yy_bp; - YY_G(yy_hold_char) = *yy_cp; - YY_G(yy_c_buf_p) = yy_cp; -} -%if-c-only -]]) -%endif -#endif - -%if-c-only -#ifndef YY_NO_INPUT -#ifdef __cplusplus - static int yyinput (M4_YY_DEF_ONLY_ARG) -#else - static int input (M4_YY_DEF_ONLY_ARG) -#endif - -%endif -%if-c++-only - int yyFlexLexer::yyinput() -%endif -{ - int c; - M4_YY_DECL_GUTS_VAR(); - - *YY_G(yy_c_buf_p) = YY_G(yy_hold_char); - - if ( *YY_G(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) - { - /* yy_c_buf_p now points to the character we want to return. - * If this occurs *before* the EOB characters, then it's a - * valid NUL; if not, then we've hit the end of the buffer. - */ - if ( YY_G(yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[YY_G(yy_n_chars)] ) - /* This was really a NUL. */ - *YY_G(yy_c_buf_p) = '\0'; - - else - { /* need more input */ - int offset = (int) (YY_G(yy_c_buf_p) - YY_G(yytext_ptr)); - ++YY_G(yy_c_buf_p); - - switch ( yy_get_next_buffer( M4_YY_CALL_ONLY_ARG ) ) - { - case EOB_ACT_LAST_MATCH: - /* This happens because yy_g_n_b() - * sees that we've accumulated a - * token and flags that we need to - * try matching the token before - * proceeding. But for input(), - * there's no matching to consider. - * So convert the EOB_ACT_LAST_MATCH - * to EOB_ACT_END_OF_FILE. - */ - - /* Reset buffer status. */ - yyrestart( yyin M4_YY_CALL_LAST_ARG); - - /*FALLTHROUGH*/ - - case EOB_ACT_END_OF_FILE: - { - if ( yywrap( M4_YY_CALL_ONLY_ARG ) ) - return 0; - - if ( ! YY_G(yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; -#ifdef __cplusplus - return yyinput(M4_YY_CALL_ONLY_ARG); -#else - return input(M4_YY_CALL_ONLY_ARG); -#endif - } - - case EOB_ACT_CONTINUE_SCAN: - YY_G(yy_c_buf_p) = YY_G(yytext_ptr) + offset; - break; - } - } - } - - c = *(unsigned char *) YY_G(yy_c_buf_p); /* cast for 8-bit char's */ - *YY_G(yy_c_buf_p) = '\0'; /* preserve yytext */ - YY_G(yy_hold_char) = *++YY_G(yy_c_buf_p); - -%% [19.0] update BOL and yylineno - - return c; -} -%if-c-only -#endif /* ifndef YY_NO_INPUT */ -%endif - -/** Immediately switch to a different input stream. - * @param input_file A readable stream. - * M4_YY_DOC_PARAM - * @note This function does not reset the start condition to @c INITIAL . - */ -%if-c-only - void yyrestart YYFARGS1( FILE *,input_file) -%endif -%if-c++-only - void yyFlexLexer::yyrestart( std::istream& input_file ) -%endif -{ - M4_YY_DECL_GUTS_VAR(); - - if ( ! YY_CURRENT_BUFFER ){ - yyensure_buffer_stack (M4_YY_CALL_ONLY_ARG); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer( yyin, YY_BUF_SIZE M4_YY_CALL_LAST_ARG); - } - - yy_init_buffer( YY_CURRENT_BUFFER, input_file M4_YY_CALL_LAST_ARG); - yy_load_buffer_state( M4_YY_CALL_ONLY_ARG ); -} - -%if-c++-only -/** Delegate to the new version that takes an istream reference. - * @param input_file A readable stream. - * M4_YY_DOC_PARAM - * @note This function does not reset the start condition to @c INITIAL . - */ -void yyFlexLexer::yyrestart( std::istream* input_file ) -{ - if( ! input_file ) { - input_file = &yyin; - } - yyrestart( *input_file ); -} -%endif - -/** Switch to a different input buffer. - * @param new_buffer The new input buffer. - * M4_YY_DOC_PARAM - */ -%if-c-only - void yy_switch_to_buffer YYFARGS1( YY_BUFFER_STATE ,new_buffer) -%endif -%if-c++-only - void yyFlexLexer::yy_switch_to_buffer( YY_BUFFER_STATE new_buffer ) -%endif -{ - M4_YY_DECL_GUTS_VAR(); - - /* TODO. We should be able to replace this entire function body - * with - * yypop_buffer_state(); - * yypush_buffer_state(new_buffer); - */ - yyensure_buffer_stack (M4_YY_CALL_ONLY_ARG); - if ( YY_CURRENT_BUFFER == new_buffer ) - return; - - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *YY_G(yy_c_buf_p) = YY_G(yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = YY_G(yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = YY_G(yy_n_chars); - } - - YY_CURRENT_BUFFER_LVALUE = new_buffer; - yy_load_buffer_state( M4_YY_CALL_ONLY_ARG ); - - /* We don't actually know whether we did this switch during - * EOF (yywrap()) processing, but the only time this flag - * is looked at is after yywrap() is called, so it's safe - * to go ahead and always set it. - */ - YY_G(yy_did_buffer_switch_on_eof) = 1; -} - - -%if-c-only -static void yy_load_buffer_state (M4_YY_DEF_ONLY_ARG) -%endif -%if-c++-only - void yyFlexLexer::yy_load_buffer_state() -%endif -{ - M4_YY_DECL_GUTS_VAR(); - YY_G(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - YY_G(yytext_ptr) = YY_G(yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; -%if-c-only - yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; -%endif -%if-c++-only - yyin.rdbuf(YY_CURRENT_BUFFER_LVALUE->yy_input_file); -%endif - YY_G(yy_hold_char) = *YY_G(yy_c_buf_p); -} - -/** Allocate and initialize an input buffer state. - * @param file A readable stream. - * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * M4_YY_DOC_PARAM - * @return the allocated buffer state. - */ -%if-c-only - YY_BUFFER_STATE yy_create_buffer YYFARGS2( FILE *,file, int ,size) -%endif -%if-c++-only - YY_BUFFER_STATE yyFlexLexer::yy_create_buffer( std::istream& file, int size ) -%endif -{ - YY_BUFFER_STATE b; - m4_dnl M4_YY_DECL_GUTS_VAR(); - - b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) M4_YY_CALL_LAST_ARG ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_buf_size = size; - - /* yy_ch_buf has to be 2 characters longer than the size given because - * we need to put in 2 end-of-buffer characters. - */ - b->yy_ch_buf = (char *) yyalloc( (yy_size_t) (b->yy_buf_size + 2) M4_YY_CALL_LAST_ARG ); - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_is_our_buffer = 1; - - yy_init_buffer( b, file M4_YY_CALL_LAST_ARG); - - return b; -} - -%if-c++-only -/** Delegate creation of buffers to the new version that takes an istream reference. - * @param file A readable stream. - * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * M4_YY_DOC_PARAM - * @return the allocated buffer state. - */ - YY_BUFFER_STATE yyFlexLexer::yy_create_buffer( std::istream* file, int size ) -{ - return yy_create_buffer( *file, size ); -} -%endif - -/** Destroy the buffer. - * @param b a buffer created with yy_create_buffer() - * M4_YY_DOC_PARAM - */ -%if-c-only - void yy_delete_buffer YYFARGS1( YY_BUFFER_STATE ,b) -%endif -%if-c++-only - void yyFlexLexer::yy_delete_buffer( YY_BUFFER_STATE b ) -%endif -{ - M4_YY_DECL_GUTS_VAR(); - - if ( ! b ) - return; - - if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ - YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; - - if ( b->yy_is_our_buffer ) - yyfree( (void *) b->yy_ch_buf M4_YY_CALL_LAST_ARG ); - - yyfree( (void *) b M4_YY_CALL_LAST_ARG ); -} - - -/* Initializes or reinitializes a buffer. - * This function is sometimes called more than once on the same buffer, - * such as during a yyrestart() or at EOF. - */ -%if-c-only - static void yy_init_buffer YYFARGS2( YY_BUFFER_STATE ,b, FILE *,file) -%endif -%if-c++-only - void yyFlexLexer::yy_init_buffer( YY_BUFFER_STATE b, std::istream& file ) -%endif - -{ - int oerrno = errno; - M4_YY_DECL_GUTS_VAR(); - - yy_flush_buffer( b M4_YY_CALL_LAST_ARG); - -%if-c-only - b->yy_input_file = file; -%endif -%if-c++-only - b->yy_input_file = file.rdbuf(); -%endif - b->yy_fill_buffer = 1; - - /* If b is the current buffer, then yy_init_buffer was _probably_ - * called from yyrestart() or through yy_get_next_buffer. - * In that case, we don't want to reset the lineno or column. - */ - if (b != YY_CURRENT_BUFFER){ - b->yy_bs_lineno = 1; - b->yy_bs_column = 0; - } - -%if-c-only -m4_ifdef( [[M4_YY_ALWAYS_INTERACTIVE]], -[[ - b->yy_is_interactive = 1; -]], -[[ - m4_ifdef( [[M4_YY_NEVER_INTERACTIVE]], - [[ - b->yy_is_interactive = 0; - ]], - [[ - b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; - ]]) -]]) -%endif -%if-c++-only - b->yy_is_interactive = 0; -%endif - errno = oerrno; -} - -/** Discard all buffered characters. On the next scan, YY_INPUT will be called. - * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. - * M4_YY_DOC_PARAM - */ -%if-c-only - void yy_flush_buffer YYFARGS1( YY_BUFFER_STATE ,b) -%endif -%if-c++-only - void yyFlexLexer::yy_flush_buffer( YY_BUFFER_STATE b ) -%endif -{ - M4_YY_DECL_GUTS_VAR(); - if ( ! b ) - return; - - b->yy_n_chars = 0; - - /* We always need two end-of-buffer characters. The first causes - * a transition to the end-of-buffer state. The second causes - * a jam in that state. - */ - b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; - b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; - - b->yy_buf_pos = &b->yy_ch_buf[0]; - - b->yy_at_bol = 1; - b->yy_buffer_status = YY_BUFFER_NEW; - - if ( b == YY_CURRENT_BUFFER ) - yy_load_buffer_state( M4_YY_CALL_ONLY_ARG ); -} - -%if-c-or-c++ -/** Pushes the new state onto the stack. The new state becomes - * the current state. This function will allocate the stack - * if necessary. - * @param new_buffer The new state. - * M4_YY_DOC_PARAM - */ -%if-c-only -void yypush_buffer_state YYFARGS1(YY_BUFFER_STATE,new_buffer) -%endif -%if-c++-only -void yyFlexLexer::yypush_buffer_state (YY_BUFFER_STATE new_buffer) -%endif -{ - M4_YY_DECL_GUTS_VAR(); - if (new_buffer == NULL) - return; - - yyensure_buffer_stack(M4_YY_CALL_ONLY_ARG); - - /* This block is copied from yy_switch_to_buffer. */ - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *YY_G(yy_c_buf_p) = YY_G(yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = YY_G(yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = YY_G(yy_n_chars); - } - - /* Only push if top exists. Otherwise, replace top. */ - if (YY_CURRENT_BUFFER) - YY_G(yy_buffer_stack_top)++; - YY_CURRENT_BUFFER_LVALUE = new_buffer; - - /* copied from yy_switch_to_buffer. */ - yy_load_buffer_state( M4_YY_CALL_ONLY_ARG ); - YY_G(yy_did_buffer_switch_on_eof) = 1; -} -%endif - - -%if-c-or-c++ -/** Removes and deletes the top of the stack, if present. - * The next element becomes the new top. - * M4_YY_DOC_PARAM - */ -%if-c-only -void yypop_buffer_state (M4_YY_DEF_ONLY_ARG) -%endif -%if-c++-only -void yyFlexLexer::yypop_buffer_state (void) -%endif -{ - M4_YY_DECL_GUTS_VAR(); - if (!YY_CURRENT_BUFFER) - return; - - yy_delete_buffer(YY_CURRENT_BUFFER M4_YY_CALL_LAST_ARG); - YY_CURRENT_BUFFER_LVALUE = NULL; - if (YY_G(yy_buffer_stack_top) > 0) - --YY_G(yy_buffer_stack_top); - - if (YY_CURRENT_BUFFER) { - yy_load_buffer_state( M4_YY_CALL_ONLY_ARG ); - YY_G(yy_did_buffer_switch_on_eof) = 1; - } -} -%endif - - -%if-c-or-c++ -/* Allocates the stack if it does not exist. - * Guarantees space for at least one push. - */ -%if-c-only -static void yyensure_buffer_stack (M4_YY_DEF_ONLY_ARG) -%endif -%if-c++-only -void yyFlexLexer::yyensure_buffer_stack(void) -%endif -{ - yy_size_t num_to_alloc; - M4_YY_DECL_GUTS_VAR(); - - if (!YY_G(yy_buffer_stack)) { - - /* First allocation is just for 2 elements, since we don't know if this - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ - num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ - YY_G(yy_buffer_stack) = (struct yy_buffer_state**)yyalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - M4_YY_CALL_LAST_ARG); - if ( ! YY_G(yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - - memset(YY_G(yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); - - YY_G(yy_buffer_stack_max) = num_to_alloc; - YY_G(yy_buffer_stack_top) = 0; - return; - } - - if (YY_G(yy_buffer_stack_top) >= (YY_G(yy_buffer_stack_max)) - 1){ - - /* Increase the buffer to prepare for a possible push. */ - yy_size_t grow_size = 8 /* arbitrary grow size */; - - num_to_alloc = YY_G(yy_buffer_stack_max) + grow_size; - YY_G(yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc - (YY_G(yy_buffer_stack), - num_to_alloc * sizeof(struct yy_buffer_state*) - M4_YY_CALL_LAST_ARG); - if ( ! YY_G(yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - /* zero only the new slots.*/ - memset(YY_G(yy_buffer_stack) + YY_G(yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); - YY_G(yy_buffer_stack_max) = num_to_alloc; - } -} -%endif - - - - -m4_ifdef( [[M4_YY_NO_SCAN_BUFFER]],, -[[ -%if-c-only -/** Setup the input buffer state to scan directly from a user-specified character buffer. - * @param base the character buffer - * @param size the size in bytes of the character buffer - * M4_YY_DOC_PARAM - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_buffer YYFARGS2( char *,base, yy_size_t ,size) -{ - YY_BUFFER_STATE b; - m4_dnl M4_YY_DECL_GUTS_VAR(); - - if ( size < 2 || - base[size-2] != YY_END_OF_BUFFER_CHAR || - base[size-1] != YY_END_OF_BUFFER_CHAR ) - /* They forgot to leave room for the EOB's. */ - return NULL; - - b = (YY_BUFFER_STATE) yyalloc( sizeof( struct yy_buffer_state ) M4_YY_CALL_LAST_ARG ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); - - b->yy_buf_size = (int) (size - 2); /* "- 2" to take care of EOB's */ - b->yy_buf_pos = b->yy_ch_buf = base; - b->yy_is_our_buffer = 0; - b->yy_input_file = NULL; - b->yy_n_chars = b->yy_buf_size; - b->yy_is_interactive = 0; - b->yy_at_bol = 1; - b->yy_fill_buffer = 0; - b->yy_buffer_status = YY_BUFFER_NEW; - - yy_switch_to_buffer( b M4_YY_CALL_LAST_ARG ); - - return b; -} -%endif -]]) - - -m4_ifdef( [[M4_YY_NO_SCAN_STRING]],, -[[ -%if-c-only -/** Setup the input buffer state to scan a string. The next call to yylex() will - * scan from a @e copy of @a str. - * @param yystr a NUL-terminated string to scan - * M4_YY_DOC_PARAM - * @return the newly allocated buffer state object. - * @note If you want to scan bytes that may contain NUL values, then use - * yy_scan_bytes() instead. - */ -YY_BUFFER_STATE yy_scan_string YYFARGS1( const char *, yystr) -{ - m4_dnl M4_YY_DECL_GUTS_VAR(); - - return yy_scan_bytes( yystr, (int) strlen(yystr) M4_YY_CALL_LAST_ARG); -} -%endif -]]) - - -m4_ifdef( [[M4_YY_NO_SCAN_BYTES]],, -[[ -%if-c-only -/** Setup the input buffer state to scan the given bytes. The next call to yylex() will - * scan from a @e copy of @a bytes. - * @param yybytes the byte buffer to scan - * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. - * M4_YY_DOC_PARAM - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_bytes YYFARGS2( const char *,yybytes, int ,_yybytes_len) -{ - YY_BUFFER_STATE b; - char *buf; - yy_size_t n; - int i; - m4_dnl M4_YY_DECL_GUTS_VAR(); - - /* Get memory for full buffer, including space for trailing EOB's. */ - n = (yy_size_t) (_yybytes_len + 2); - buf = (char *) yyalloc( n M4_YY_CALL_LAST_ARG ); - if ( ! buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); - - for ( i = 0; i < _yybytes_len; ++i ) - buf[i] = yybytes[i]; - - buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; - - b = yy_scan_buffer( buf, n M4_YY_CALL_LAST_ARG); - if ( ! b ) - YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); - - /* It's okay to grow etc. this buffer, and we should throw it - * away when we're done. - */ - b->yy_is_our_buffer = 1; - - return b; -} -%endif -]]) - - -m4_ifdef( [[M4_YY_NO_PUSH_STATE]],, -[[ -%if-c-only - static void yy_push_state YYFARGS1( int ,_new_state) -%endif -%if-c++-only - void yyFlexLexer::yy_push_state( int _new_state ) -%endif -{ - M4_YY_DECL_GUTS_VAR(); - if ( YY_G(yy_start_stack_ptr) >= YY_G(yy_start_stack_depth) ) - { - yy_size_t new_size; - - YY_G(yy_start_stack_depth) += YY_START_STACK_INCR; - new_size = (yy_size_t) YY_G(yy_start_stack_depth) * sizeof( int ); - - if ( ! YY_G(yy_start_stack) ) - YY_G(yy_start_stack) = (int *) yyalloc( new_size M4_YY_CALL_LAST_ARG ); - - else - YY_G(yy_start_stack) = (int *) yyrealloc( - (void *) YY_G(yy_start_stack), new_size M4_YY_CALL_LAST_ARG ); - - if ( ! YY_G(yy_start_stack) ) - YY_FATAL_ERROR( "out of memory expanding start-condition stack" ); - } - - YY_G(yy_start_stack)[YY_G(yy_start_stack_ptr)++] = YY_START; - - BEGIN(_new_state); -} -]]) - - -m4_ifdef( [[M4_YY_NO_POP_STATE]],, -[[ -%if-c-only - static void yy_pop_state (M4_YY_DEF_ONLY_ARG) -%endif -%if-c++-only - void yyFlexLexer::yy_pop_state() -%endif -{ - M4_YY_DECL_GUTS_VAR(); - if ( --YY_G(yy_start_stack_ptr) < 0 ) - YY_FATAL_ERROR( "start-condition stack underflow" ); - - BEGIN(YY_G(yy_start_stack)[YY_G(yy_start_stack_ptr)]); -} -]]) - - -m4_ifdef( [[M4_YY_NO_TOP_STATE]],, -[[ -%if-c-only - static int yy_top_state (M4_YY_DEF_ONLY_ARG) -%endif -%if-c++-only - int yyFlexLexer::yy_top_state() -%endif -{ - M4_YY_DECL_GUTS_VAR(); - return YY_G(yy_start_stack_ptr) > 0 ? YY_G(yy_start_stack)[YY_G(yy_start_stack_ptr) - 1] : YY_START; -} -]]) - -#ifndef YY_EXIT_FAILURE -#define YY_EXIT_FAILURE 2 -#endif - -%if-c-only -static void yynoreturn yy_fatal_error YYFARGS1(const char*, msg) -{ - M4_YY_DECL_GUTS_VAR(); - M4_YY_NOOP_GUTS_VAR(); - fprintf( stderr, "%s\n", msg ); - exit( YY_EXIT_FAILURE ); -} -%endif -%if-c++-only -void yyFlexLexer::LexerError( const char* msg ) -{ - M4_YY_DECL_GUTS_VAR(); - std::cerr << msg << std::endl; - exit( YY_EXIT_FAILURE ); -} -%endif - -/* Redefine yyless() so it works in section 3 code. */ - -#undef yyless -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - yytext[yyleng] = YY_G(yy_hold_char); \ - YY_G(yy_c_buf_p) = yytext + yyless_macro_arg; \ - YY_G(yy_hold_char) = *YY_G(yy_c_buf_p); \ - *YY_G(yy_c_buf_p) = '\0'; \ - yyleng = yyless_macro_arg; \ - } \ - while ( 0 ) - - - -/* Accessor methods (get/set functions) to struct members. */ - -%if-c-only -%if-reentrant -m4_ifdef( [[M4_YY_NO_GET_EXTRA]],, -[[ -/** Get the user-defined data for this scanner. - * M4_YY_DOC_PARAM - */ -YY_EXTRA_TYPE yyget_extra (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - return yyextra; -} -]]) -%endif - -m4_ifdef( [[M4_YY_NO_GET_LINENO]],, -[[ -/** Get the current line number. - * M4_YY_DOC_PARAM - */ -int yyget_lineno (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - - m4_ifdef( [[M4_YY_REENTRANT]], - [[ - if (! YY_CURRENT_BUFFER) - return 0; - ]]) - return yylineno; -} -]]) - -m4_ifdef( [[M4_YY_REENTRANT]], -[[ -m4_ifdef( [[M4_YY_NO_GET_COLUMN]],, -[[ -/** Get the current column number. - * M4_YY_DOC_PARAM - */ -int yyget_column (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - - m4_ifdef( [[M4_YY_REENTRANT]], - [[ - if (! YY_CURRENT_BUFFER) - return 0; - ]]) - return yycolumn; -} -]]) -]]) - -m4_ifdef( [[M4_YY_NO_GET_IN]],, -[[ -/** Get the input stream. - * M4_YY_DOC_PARAM - */ -FILE *yyget_in (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - return yyin; -} -]]) - -m4_ifdef( [[M4_YY_NO_GET_OUT]],, -[[ -/** Get the output stream. - * M4_YY_DOC_PARAM - */ -FILE *yyget_out (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - return yyout; -} -]]) - -m4_ifdef( [[M4_YY_NO_GET_LENG]],, -[[ -/** Get the length of the current token. - * M4_YY_DOC_PARAM - */ -int yyget_leng (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - return yyleng; -} -]]) - -/** Get the current token. - * M4_YY_DOC_PARAM - */ -m4_ifdef( [[M4_YY_NO_GET_TEXT]],, -[[ -char *yyget_text (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - return yytext; -} -]]) - -%if-reentrant -m4_ifdef( [[M4_YY_NO_SET_EXTRA]],, -[[ -/** Set the user-defined data. This data is never touched by the scanner. - * @param user_defined The data to be associated with this scanner. - * M4_YY_DOC_PARAM - */ -void yyset_extra YYFARGS1( YY_EXTRA_TYPE ,user_defined) -{ - M4_YY_DECL_GUTS_VAR(); - yyextra = user_defined ; -} -]]) -%endif - -m4_ifdef( [[M4_YY_NO_SET_LINENO]],, -[[ -/** Set the current line number. - * @param _line_number line number - * M4_YY_DOC_PARAM - */ -void yyset_lineno YYFARGS1( int ,_line_number) -{ - M4_YY_DECL_GUTS_VAR(); - - m4_ifdef( [[M4_YY_REENTRANT]], - [[ - /* lineno is only valid if an input buffer exists. */ - if (! YY_CURRENT_BUFFER ) - YY_FATAL_ERROR( "yyset_lineno called with no buffer" ); - ]]) - yylineno = _line_number; -} -]]) - -m4_ifdef( [[M4_YY_REENTRANT]], -[[ -m4_ifdef( [[M4_YY_NO_SET_COLUMN]],, -[[ -/** Set the current column. - * @param _column_no column number - * M4_YY_DOC_PARAM - */ -void yyset_column YYFARGS1( int , _column_no) -{ - M4_YY_DECL_GUTS_VAR(); - - m4_ifdef( [[M4_YY_REENTRANT]], - [[ - /* column is only valid if an input buffer exists. */ - if (! YY_CURRENT_BUFFER ) - YY_FATAL_ERROR( "yyset_column called with no buffer" ); - ]]) - yycolumn = _column_no; -} -]]) -]]) - - -m4_ifdef( [[M4_YY_NO_SET_IN]],, -[[ -/** Set the input stream. This does not discard the current - * input buffer. - * @param _in_str A readable stream. - * M4_YY_DOC_PARAM - * @see yy_switch_to_buffer - */ -void yyset_in YYFARGS1( FILE * ,_in_str) -{ - M4_YY_DECL_GUTS_VAR(); - yyin = _in_str ; -} -]]) - -m4_ifdef( [[M4_YY_NO_SET_OUT]],, -[[ -void yyset_out YYFARGS1( FILE * ,_out_str) -{ - M4_YY_DECL_GUTS_VAR(); - yyout = _out_str ; -} -]]) - - -m4_ifdef( [[M4_YY_NO_GET_DEBUG]],, -[[ -int yyget_debug (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - return yy_flex_debug; -} -]]) - -m4_ifdef( [[M4_YY_NO_SET_DEBUG]],, -[[ -void yyset_debug YYFARGS1( int ,_bdebug) -{ - M4_YY_DECL_GUTS_VAR(); - yy_flex_debug = _bdebug ; -} -]]) -%endif - -%if-reentrant -/* Accessor methods for yylval and yylloc */ - -%if-bison-bridge -m4_ifdef( [[M4_YY_NO_GET_LVAL]],, -[[ -YYSTYPE * yyget_lval (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - return yylval; -} -]]) - -m4_ifdef( [[M4_YY_NO_SET_LVAL]],, -[[ -void yyset_lval YYFARGS1( YYSTYPE * ,yylval_param) -{ - M4_YY_DECL_GUTS_VAR(); - yylval = yylval_param; -} -]]) - -m4_ifdef( [[<M4_YY_BISON_LLOC>]], -[[ - m4_ifdef( [[M4_YY_NO_GET_LLOC]],, - [[ -YYLTYPE *yyget_lloc (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - return yylloc; -} - ]]) - - m4_ifdef( [[M4_YY_NO_SET_LLOC]],, - [[ -void yyset_lloc YYFARGS1( YYLTYPE * ,yylloc_param) -{ - M4_YY_DECL_GUTS_VAR(); - yylloc = yylloc_param; -} - ]]) -]]) - -%endif - - -/* User-visible API */ - -/* yylex_init is special because it creates the scanner itself, so it is - * the ONLY reentrant function that doesn't take the scanner as the last argument. - * That's why we explicitly handle the declaration, instead of using our macros. - */ -int yylex_init(yyscan_t* ptr_yy_globals) -{ - if (ptr_yy_globals == NULL){ - errno = EINVAL; - return 1; - } - - *ptr_yy_globals = (yyscan_t) yyalloc ( sizeof( struct yyguts_t ), NULL ); - - if (*ptr_yy_globals == NULL){ - errno = ENOMEM; - return 1; - } - - /* By setting to 0xAA, we expose bugs in yy_init_globals. Leave at 0x00 for releases. */ - memset(*ptr_yy_globals,0x00,sizeof(struct yyguts_t)); - - return yy_init_globals ( *ptr_yy_globals ); -} - - -/* yylex_init_extra has the same functionality as yylex_init, but follows the - * convention of taking the scanner as the last argument. Note however, that - * this is a *pointer* to a scanner, as it will be allocated by this call (and - * is the reason, too, why this function also must handle its own declaration). - * The user defined value in the first argument will be available to yyalloc in - * the yyextra field. - */ -int yylex_init_extra( YY_EXTRA_TYPE yy_user_defined, yyscan_t* ptr_yy_globals ) -{ - struct yyguts_t dummy_yyguts; - - yyset_extra (yy_user_defined, &dummy_yyguts); - - if (ptr_yy_globals == NULL){ - errno = EINVAL; - return 1; - } - - *ptr_yy_globals = (yyscan_t) yyalloc ( sizeof( struct yyguts_t ), &dummy_yyguts ); - - if (*ptr_yy_globals == NULL){ - errno = ENOMEM; - return 1; - } - - /* By setting to 0xAA, we expose bugs in - yy_init_globals. Leave at 0x00 for releases. */ - memset(*ptr_yy_globals,0x00,sizeof(struct yyguts_t)); - - yyset_extra (yy_user_defined, *ptr_yy_globals); - - return yy_init_globals ( *ptr_yy_globals ); -} - -%endif if-c-only -%# Actually, that ended an if-rentrant section - -%if-c-only -static int yy_init_globals (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - /* Initialization is the same as for the non-reentrant scanner. - * This function is called from yylex_destroy(), so don't allocate here. - */ - -m4_ifdef( [[M4_YY_USE_LINENO]], -[[ - m4_ifdef( [[M4_YY_NOT_REENTRANT]], - [[ - /* We do not touch yylineno unless the option is enabled. */ - yylineno = 1; - ]]) -]]) - YY_G(yy_buffer_stack) = NULL; - YY_G(yy_buffer_stack_top) = 0; - YY_G(yy_buffer_stack_max) = 0; - YY_G(yy_c_buf_p) = NULL; - YY_G(yy_init) = 0; - YY_G(yy_start) = 0; - -m4_ifdef( [[M4_YY_HAS_START_STACK_VARS]], -[[ - YY_G(yy_start_stack_ptr) = 0; - YY_G(yy_start_stack_depth) = 0; - YY_G(yy_start_stack) = NULL; -]]) - -m4_ifdef( [[M4_YY_USES_REJECT]], -[[ - YY_G(yy_state_buf) = 0; - YY_G(yy_state_ptr) = 0; - YY_G(yy_full_match) = 0; - YY_G(yy_lp) = 0; -]]) - -m4_ifdef( [[M4_YY_TEXT_IS_ARRAY]], -[[ - YY_G(yytext_ptr) = 0; - YY_G(yy_more_offset) = 0; - YY_G(yy_prev_more_offset) = 0; -]]) - -/* Defined in main.c */ -#ifdef YY_STDINIT - yyin = stdin; - yyout = stdout; -#else - yyin = NULL; - yyout = NULL; -#endif - - /* For future reference: Set errno on error, since we are called by - * yylex_init() - */ - return 0; -} -%endif - - -%if-c-only SNIP! this currently causes conflicts with the c++ scanner -/* yylex_destroy is for both reentrant and non-reentrant scanners. */ -int yylex_destroy (M4_YY_DEF_ONLY_ARG) -{ - M4_YY_DECL_GUTS_VAR(); - - /* Pop the buffer stack, destroying each element. */ - while(YY_CURRENT_BUFFER){ - yy_delete_buffer( YY_CURRENT_BUFFER M4_YY_CALL_LAST_ARG ); - YY_CURRENT_BUFFER_LVALUE = NULL; - yypop_buffer_state(M4_YY_CALL_ONLY_ARG); - } - - /* Destroy the stack itself. */ - yyfree(YY_G(yy_buffer_stack) M4_YY_CALL_LAST_ARG); - YY_G(yy_buffer_stack) = NULL; - -m4_ifdef( [[M4_YY_HAS_START_STACK_VARS]], -[[ - /* Destroy the start condition stack. */ - yyfree( YY_G(yy_start_stack) M4_YY_CALL_LAST_ARG ); - YY_G(yy_start_stack) = NULL; -]]) - -m4_ifdef( [[M4_YY_USES_REJECT]], -[[ - yyfree ( YY_G(yy_state_buf) M4_YY_CALL_LAST_ARG); - YY_G(yy_state_buf) = NULL; -]]) - - /* Reset the globals. This is important in a non-reentrant scanner so the next time - * yylex() is called, initialization will occur. */ - yy_init_globals( M4_YY_CALL_ONLY_ARG); - -%if-reentrant - /* Destroy the main struct (reentrant only). */ - yyfree ( yyscanner M4_YY_CALL_LAST_ARG ); - yyscanner = NULL; -%endif - return 0; -} -%endif - - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -/* - * Internal utility routines. - */ -]]) - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -#ifndef yytext_ptr -static void yy_flex_strncpy YYFARGS3( char*,s1, const char *,s2, int,n) -{ - M4_YY_DECL_GUTS_VAR(); - M4_YY_NOOP_GUTS_VAR(); - - int i; - for ( i = 0; i < n; ++i ) - s1[i] = s2[i]; -} -#endif -]]) - -m4_ifdef( [[M4_YY_NOT_IN_HEADER]], -[[ -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen YYFARGS1( const char *,s) -{ - int n; - for ( n = 0; s[n]; ++n ) - ; - - return n; -} -#endif -]]) - -m4_ifdef( [[M4_YY_NO_FLEX_ALLOC]],, -[[ -void *yyalloc YYFARGS1( yy_size_t ,size) -{ - M4_YY_DECL_GUTS_VAR(); - M4_YY_NOOP_GUTS_VAR(); - return malloc(size); -} -]]) - -m4_ifdef( [[M4_YY_NO_FLEX_REALLOC]],, -[[ -void *yyrealloc YYFARGS2( void *,ptr, yy_size_t ,size) -{ - M4_YY_DECL_GUTS_VAR(); - M4_YY_NOOP_GUTS_VAR(); - - /* The cast to (char *) in the following accommodates both - * implementations that use char* generic pointers, and those - * that use void* generic pointers. It works with the latter - * because both ANSI C and C++ allow castless assignment from - * any pointer type to void*, and deal with argument conversions - * as though doing an assignment. - */ - return realloc(ptr, size); -} -]]) - -m4_ifdef( [[M4_YY_NO_FLEX_FREE]],, -[[ -void yyfree YYFARGS1( void *,ptr) -{ - M4_YY_DECL_GUTS_VAR(); - M4_YY_NOOP_GUTS_VAR(); - free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ -} -]]) - -%if-tables-serialization definitions -m4preproc_include(`tables_shared.c') - -static int yytbl_read8 (void *v, struct yytbl_reader * rd) -{ - errno = 0; - if (fread (v, sizeof (flex_uint8_t), 1, rd->fp) != 1){ - errno = EIO; - return -1; - } - rd->bread += (flex_uint32_t) sizeof(flex_uint8_t); - return 0; -} - -static int yytbl_read16 (void *v, struct yytbl_reader * rd) -{ - errno = 0; - if (fread (v, sizeof (flex_uint16_t), 1, rd->fp) != 1){ - errno = EIO; - return -1; - } - *((flex_uint16_t *) v) = ntohs (*((flex_uint16_t *) v)); - rd->bread += (flex_uint32_t) sizeof(flex_uint16_t); - return 0; -} - -static int yytbl_read32 (void *v, struct yytbl_reader * rd) -{ - errno = 0; - if (fread (v, sizeof (flex_uint32_t), 1, rd->fp) != 1){ - errno = EIO; - return -1; - } - *((flex_uint32_t *) v) = ntohl (*((flex_uint32_t *) v)); - rd->bread += (flex_uint32_t) sizeof(flex_uint32_t); - return 0; -} - -/** Read the header */ -static int yytbl_hdr_read YYFARGS2(struct yytbl_hdr *, th, struct yytbl_reader *, rd) -{ - size_t bytes; - memset (th, 0, sizeof (struct yytbl_hdr)); - - if (yytbl_read32 (&(th->th_magic), rd) != 0) - return -1; - - if (th->th_magic != YYTBL_MAGIC){ - YY_FATAL_ERROR( "bad magic number" ); /* TODO: not fatal. */ - return -1; - } - - if (yytbl_read32 (&(th->th_hsize), rd) != 0 - || yytbl_read32 (&(th->th_ssize), rd) != 0 - || yytbl_read16 (&(th->th_flags), rd) != 0) - return -1; - - /* Sanity check on header size. Greater than 1k suggests some funny business. */ - if (th->th_hsize < 16 || th->th_hsize > 1024){ - YY_FATAL_ERROR( "insane header size detected" ); /* TODO: not fatal. */ - return -1; - } - - /* Allocate enough space for the version and name fields */ - bytes = th->th_hsize - 14; - th->th_version = (char *) yyalloc (bytes M4_YY_CALL_LAST_ARG); - if ( ! th->th_version ) - YY_FATAL_ERROR( "out of dynamic memory in yytbl_hdr_read()" ); - - /* we read it all into th_version, and point th_name into that data */ - if (fread (th->th_version, 1, bytes, rd->fp) != bytes){ - errno = EIO; - yyfree(th->th_version M4_YY_CALL_LAST_ARG); - th->th_version = NULL; - return -1; - } - else - rd->bread += (flex_uint32_t) bytes; - - th->th_name = th->th_version + strlen (th->th_version) + 1; - return 0; -} - -/** lookup id in the dmap list. - * @param dmap pointer to first element in list - * @return NULL if not found. - */ -static struct yytbl_dmap *yytbl_dmap_lookup YYFARGS2(struct yytbl_dmap *, dmap, - int, id) -{ - M4_YY_DECL_GUTS_VAR(); - M4_YY_NOOP_GUTS_VAR(); - - while (dmap->dm_id) - if ((int)(dmap->dm_id) == id) - return dmap; - else - dmap++; - return NULL; -} - -/** Read a table while mapping its contents to the local array. - * @param dmap used to performing mapping - * @return 0 on success - */ -static int yytbl_data_load YYFARGS2(struct yytbl_dmap *, dmap, struct yytbl_reader*, rd) -{ - struct yytbl_data td; - struct yytbl_dmap *transdmap=0; - int len, i, rv, inner_loop_count; - void *p=0; - - memset (&td, 0, sizeof (struct yytbl_data)); - - if (yytbl_read16 (&td.td_id, rd) != 0 - || yytbl_read16 (&td.td_flags, rd) != 0 - || yytbl_read32 (&td.td_hilen, rd) != 0 - || yytbl_read32 (&td.td_lolen, rd) != 0) - return -1; - - /* Lookup the map for the transition table so we have it in case we need it - * inside the loop below. This scanner might not even have a transition - * table, which is ok. - */ - transdmap = yytbl_dmap_lookup (dmap, YYTD_ID_TRANSITION M4_YY_CALL_LAST_ARG); - - if ((dmap = yytbl_dmap_lookup (dmap, td.td_id M4_YY_CALL_LAST_ARG)) == NULL){ - YY_FATAL_ERROR( "table id not found in map." ); /* TODO: not fatal. */ - return -1; - } - - /* Allocate space for table. - * The --full yy_transition table is a special case, since we - * need the dmap.dm_sz entry to tell us the sizeof the individual - * struct members. - */ - { - size_t bytes; - - if ((td.td_flags & YYTD_STRUCT)) - bytes = sizeof(struct yy_trans_info) * td.td_lolen * (td.td_hilen ? td.td_hilen : 1); - else - bytes = td.td_lolen * (td.td_hilen ? td.td_hilen : 1) * dmap->dm_sz; - - if(M4_YY_TABLES_VERIFY) - /* We point to the array itself */ - p = dmap->dm_arr; - else - /* We point to the address of a pointer. */ - *dmap->dm_arr = p = (void *) yyalloc (bytes M4_YY_CALL_LAST_ARG); - if ( ! p ) - YY_FATAL_ERROR( "out of dynamic memory in yytbl_data_load()" ); - } - - /* If it's a struct, we read 2 integers to get one element */ - if ((td.td_flags & YYTD_STRUCT) != 0) - inner_loop_count = 2; - else - inner_loop_count = 1; - - /* read and map each element. - * This loop iterates once for each element of the td_data array. - * Notice that we increment 'i' in the inner loop. - */ - len = yytbl_calc_total_len (&td); - for (i = 0; i < len; ){ - int j; - - - /* This loop really executes exactly 1 or 2 times. - * The second time is to handle the second member of the - * YYTD_STRUCT for the yy_transition array. - */ - for (j = 0; j < inner_loop_count; j++, i++) { - flex_int32_t t32; - - /* read into t32 no matter what the real size is. */ - { - flex_int16_t t16; - flex_int8_t t8; - - switch (YYTDFLAGS2BYTES (td.td_flags)) { - case sizeof (flex_int32_t): - rv = yytbl_read32 (&t32, rd); - break; - case sizeof (flex_int16_t): - rv = yytbl_read16 (&t16, rd); - t32 = t16; - break; - case sizeof (flex_int8_t): - rv = yytbl_read8 (&t8, rd); - t32 = t8; - break; - default: - YY_FATAL_ERROR( "invalid td_flags" ); /* TODO: not fatal. */ - return -1; - } - } - if (rv != 0) - return -1; - - /* copy into the deserialized array... */ - - if ((td.td_flags & YYTD_STRUCT)) { - /* t32 is the j'th member of a two-element struct. */ - void *v; - - v = j == 0 ? &(((struct yy_trans_info *) p)->yy_verify) - : &(((struct yy_trans_info *) p)->yy_nxt); - - switch (dmap->dm_sz) { - case sizeof (flex_int32_t): - if (M4_YY_TABLES_VERIFY){ - if( ((flex_int32_t *) v)[0] != (flex_int32_t) t32) - YY_FATAL_ERROR( "tables verification failed at YYTD_STRUCT flex_int32_t" ); - }else - ((flex_int32_t *) v)[0] = (flex_int32_t) t32; - break; - case sizeof (flex_int16_t): - if (M4_YY_TABLES_VERIFY ){ - if(((flex_int16_t *) v)[0] != (flex_int16_t) t32) - YY_FATAL_ERROR( "tables verification failed at YYTD_STRUCT flex_int16_t" ); - }else - ((flex_int16_t *) v)[0] = (flex_int16_t) t32; - break; - case sizeof(flex_int8_t): - if (M4_YY_TABLES_VERIFY ){ - if( ((flex_int8_t *) v)[0] != (flex_int8_t) t32) - YY_FATAL_ERROR( "tables verification failed at YYTD_STRUCT flex_int8_t" ); - }else - ((flex_int8_t *) v)[0] = (flex_int8_t) t32; - break; - default: - YY_FATAL_ERROR( "invalid dmap->dm_sz for struct" ); /* TODO: not fatal. */ - return -1; - } - - /* if we're done with j, increment p */ - if (j == 1) - p = (struct yy_trans_info *) p + 1; - } - else if ((td.td_flags & YYTD_PTRANS)) { - /* t32 is an index into the transition array. */ - struct yy_trans_info *v; - - - if (!transdmap){ - YY_FATAL_ERROR( "transition table not found" ); /* TODO: not fatal. */ - return -1; - } - - if( M4_YY_TABLES_VERIFY) - v = &(((struct yy_trans_info *) (transdmap->dm_arr))[t32]); - else - v = &((*((struct yy_trans_info **) (transdmap->dm_arr)))[t32]); - - if(M4_YY_TABLES_VERIFY ){ - if( ((struct yy_trans_info **) p)[0] != v) - YY_FATAL_ERROR( "tables verification failed at YYTD_PTRANS" ); - }else - ((struct yy_trans_info **) p)[0] = v; - - /* increment p */ - p = (struct yy_trans_info **) p + 1; - } - else { - /* t32 is a plain int. copy data, then incrememnt p. */ - switch (dmap->dm_sz) { - case sizeof (flex_int32_t): - if(M4_YY_TABLES_VERIFY ){ - if( ((flex_int32_t *) p)[0] != (flex_int32_t) t32) - YY_FATAL_ERROR( "tables verification failed at flex_int32_t" ); - }else - ((flex_int32_t *) p)[0] = (flex_int32_t) t32; - p = ((flex_int32_t *) p) + 1; - break; - case sizeof (flex_int16_t): - if(M4_YY_TABLES_VERIFY ){ - if( ((flex_int16_t *) p)[0] != (flex_int16_t) t32) - YY_FATAL_ERROR( "tables verification failed at flex_int16_t" ); - }else - ((flex_int16_t *) p)[0] = (flex_int16_t) t32; - p = ((flex_int16_t *) p) + 1; - break; - case sizeof (flex_int8_t): - if(M4_YY_TABLES_VERIFY ){ - if( ((flex_int8_t *) p)[0] != (flex_int8_t) t32) - YY_FATAL_ERROR( "tables verification failed at flex_int8_t" ); - }else - ((flex_int8_t *) p)[0] = (flex_int8_t) t32; - p = ((flex_int8_t *) p) + 1; - break; - default: - YY_FATAL_ERROR( "invalid dmap->dm_sz for plain int" ); /* TODO: not fatal. */ - return -1; - } - } - } - - } - - /* Now eat padding. */ - { - while (rd->bread % (8 * sizeof(flex_uint8_t)) > 0) { - flex_int8_t t8; - if(yytbl_read8(&t8,rd) != 0) - return -1; - } - } - - return 0; -} - -%define-yytables The name for this specific scanner's tables. - -/* Find the key and load the DFA tables from the given stream. */ -static int yytbl_fload YYFARGS2(FILE *, fp, const char *, key) -{ - int rv=0; - struct yytbl_hdr th; - struct yytbl_reader rd; - - rd.fp = fp; - th.th_version = NULL; - - /* Keep trying until we find the right set of tables or end of file. */ - while (!feof(rd.fp)) { - rd.bread = 0; - if (yytbl_hdr_read (&th, &rd M4_YY_CALL_LAST_ARG) != 0){ - rv = -1; - goto return_rv; - } - - /* A NULL key means choose the first set of tables. */ - if (key == NULL) - break; - - if (strcmp(th.th_name,key) != 0){ - /* Skip ahead to next set */ - fseek(rd.fp, th.th_ssize - th.th_hsize, SEEK_CUR); - yyfree(th.th_version M4_YY_CALL_LAST_ARG); - th.th_version = NULL; - } - else - break; - } - - while (rd.bread < th.th_ssize){ - /* Load the data tables */ - if(yytbl_data_load (yydmap,&rd M4_YY_CALL_LAST_ARG) != 0){ - rv = -1; - goto return_rv; - } - } - -return_rv: - if(th.th_version){ - yyfree(th.th_version M4_YY_CALL_LAST_ARG); - th.th_version = NULL; - } - - return rv; -} - -/** Load the DFA tables for this scanner from the given stream. */ -int yytables_fload YYFARGS1(FILE *, fp) -{ - - if( yytbl_fload(fp, YYTABLES_NAME M4_YY_CALL_LAST_ARG) != 0) - return -1; - return 0; -} - -/** Destroy the loaded tables, freeing memory, etc.. */ -int yytables_destroy (M4_YY_DEF_ONLY_ARG) -{ - struct yytbl_dmap *dmap=0; - - if(!M4_YY_TABLES_VERIFY){ - /* Walk the dmap, freeing the pointers */ - for(dmap=yydmap; dmap->dm_id; dmap++) { - void * v; - v = dmap->dm_arr; - if(v && *(char**)v){ - yyfree(*(char**)v M4_YY_CALL_LAST_ARG); - *(char**)v = NULL; - } - } - } - - return 0; -} - -/* end table serialization code definitions */ -%endif - - -m4_ifdef([[M4_YY_MAIN]], [[ -int main (void); - -int main () -{ - -%if-reentrant - yyscan_t lexer; - yylex_init(&lexer); - yylex( lexer ); - yylex_destroy( lexer); - -%endif -%if-not-reentrant - yylex(); -%endif - - return 0; -} -]]) - -%ok-for-header -m4_ifdef( [[M4_YY_IN_HEADER]], -[[ -#undef YY_NEW_FILE -#undef YY_FLUSH_BUFFER -#undef yy_set_bol -#undef yy_new_buffer -#undef yy_set_interactive -#undef YY_DO_BEFORE_ACTION - -#ifdef YY_DECL_IS_OURS -#undef YY_DECL_IS_OURS -#undef YY_DECL -#endif -m4preproc_undivert(1) -]]) |