* AArch64: added SIMD instructions (only plain ARMv8-A for now)

   o added AArch64 regset parsing support in assembler reader, means that "{"
     no longer starts comments there (like in the ARM assembler reader)
   o added AArch64 indexed SIMD register support and removed old cg hacks
     that worked around its absence

git-svn-id: https://svn.freepascal.org/svn/fpc/trunk@47116 3ad0048d-3df7-0310-abae-a5850022a9f2

1 files changed, 403 insertions, 399 deletions

diff --git a/compiler/msgtxt.inc b/compiler/msgtxt.inc
index 738d582c70..a92381feae 100644
--- a/compiler/msgtxt.inc
+++ b/compiler/msgtxt.inc
@@ -1,8 +1,8 @@
 const msgtxt_codepage=20127;
 {$ifdef Delphi}
-const msgtxt : array[0..000358] of string[240]=(
+const msgtxt : array[0..000359] of string[240]=(
 {$else Delphi}
-const msgtxt : array[0..000358,1..240] of char=(
+const msgtxt : array[0..000359,1..240] of char=(
 {$endif Delphi}
   '01000_T_Compiler: $1'#000+
   '01001_D_Compiler OS: $1'#000+
@@ -1058,349 +1058,353 @@ const msgtxt : array[0..000358,1..240] of char=(
   '07141_W_Segment base $1 will be generated, but is ignored by the CPU',' '+
   'in 64-bit mode'#000+
   '07142_E_Mismatch broadcasting elements (expected: {$1} found: {$2})'#000+
+  '07143_E_Invalid arrangement specifier "$1"'#000+
+  '07144_E_Registers in a register set must be consecutive.'#000+
   '08000_F_Too many assembler files'#000+
-  '08001_F_Selected assembler output not supported'#000+
+  '08001_F_Selected assemb','ler output not supported'#000+
   '08002_F_Comp not supported'#000+
   '08003_F_Direct not support for binary writers'#000+
-  '08','004_E_Allocating of data is only allowed in bss section'#000+
+  '08004_E_Allocating of data is only allowed in bss section'#000+
   '08005_F_No binary writer selected'#000+
   '08006_E_Asm: Opcode $1 not in table'#000+
-  '08007_E_Asm: $1 invalid combination of opcode and operands'#000+
+  '08007_E_Asm: $','1 invalid combination of opcode and operands'#000+
   '08008_E_Asm: 16 Bit references not supported'#000+
-  '08009_E_As','m: Invalid effective address'#000+
+  '08009_E_Asm: Invalid effective address'#000+
   '08010_E_Asm: Immediate or reference expected'#000+
   '08011_E_Asm: $1 value exceeds bounds $2'#000+
-  '08012_E_Asm: Short jump is out of range $1'#000+
+  '08012_E_Asm: Short jump is',' out of range $1'#000+
   '08013_E_Asm: Undefined label $1'#000+
-  '08014_E_Asm: Comp type not supported for this targe','t'#000+
+  '08014_E_Asm: Comp type not supported for this target'#000+
   '08015_E_Asm: Extended type not supported for this target'#000+
   '08016_E_Asm: Duplicate label $1'#000+
   '08017_E_Asm: Redefined label $1'#000+
-  '08018_E_Asm: First defined here'#000+
+  '08018_E_Asm: Firs','t defined here'#000+
   '08019_E_Asm: Invalid register $1'#000+
   '08020_E_Asm: 16 or 32 Bit references not supported'#000+
-  '0','8021_E_Asm: 64 Bit operands not supported'#000+
+  '08021_E_Asm: 64 Bit operands not supported'#000+
   '08022_E_Asm: AH,BH,CH or DH cannot be used in an instruction requiring'+
   ' REX prefix'#000+
-  '08023_E_Missing .seh_endprologue directive'#000+
+  '08023_E_Missing ','.seh_endprologue directive'#000+
   '08024_E_Function prologue exceeds 255 bytes'#000+
-  '08025_E_.seh_handlerdata dire','ctive without preceding .seh_handler'#000+
+  '08025_E_.seh_handlerdata directive without preceding .seh_handler'#000+
   '08026_F_Relocation count for section $1 exceeds 65535'#000+
-  '08027_N_Change of bind type of symbol $1 from $2 to $3 after use'#000+
+  '08027_N_Change of bind type of symbol $1 from $2 ','to $3 after use'#000+
   '08028_H_Change of bind type of symbol $1 from $2 to $3 after use'#000+
-  '08029_E_Asm: 32 Bit',' references not supported'#000+
+  '08029_E_Asm: 32 Bit references not supported'#000+
   '08030_F_Code segment too large'#000+
   '08031_F_Data segment too large'#000+
-  '08032_E_Instruction not supported by the selected instruction set'#000+
+  '08032_E_Instruction not supported by the selected in','struction set'#000+
   '08033_E_Asm: conditional branch destination is out of range'#000+
-  '08034_E_Asm: RIP cannot be',' used as index register or with another re'+
-  'gister in a reference'#000+
+  '08034_E_Asm: RIP cannot be used as index register or with another regi'+
+  'ster in a reference'#000+
   '08035_F_Illegal function size for SEH function'#000+
-  '09000_W_Source operating system redefined'#000+
+  '09000_W_Source operating syst','em redefined'#000+
   '09001_I_Assembling (pipe) $1'#000+
   '09002_E_Can'#039't create assembler file: $1'#000+
-  '09003_E_Can'#039't crea','te object file: $1 (error code: $2)'#000+
+  '09003_E_Can'#039't create object file: $1 (error code: $2)'#000+
   '09004_E_Can'#039't create archive file: $1'#000+
   '09005_E_Assembler $1 not found, switching to external assembling'#000+
-  '09006_T_Using assembler: $1'#000+
+  '0','9006_T_Using assembler: $1'#000+
   '09007_E_Error while assembling exitcode $1'#000+
-  '09008_E_Can'#039't call the assembl','er, error $1 switching to external'+
-  ' assembling'#000+
+  '09008_E_Can'#039't call the assembler, error $1 switching to external a'+
+  'ssembling'#000+
   '09009_I_Assembling $1'#000+
   '09010_I_Assembling with smartlinking $1'#000+
-  '09011_W_Object $1 not found, Linking may fail !'#000+
+  '09011_W_Object $1 not found, Lin','king may fail !'#000+
   '09012_W_Library $1 not found, Linking may fail !'#000+
   '09013_E_Error while linking'#000+
-  '09014_E','_Can'#039't call the linker, switching to external linking'#000+
+  '09014_E_Can'#039't call the linker, switching to external linking'#000+
   '09015_I_Linking $1'#000+
   '09016_E_Util $1 not found, switching to external linking'#000+
-  '09017_T_Using util $1'#000+
+  '09017_T_Us','ing util $1'#000+
   '09018_E_Creation of Executables not supported'#000+
-  '09019_E_Creation of Dynamic/Shared Librari','es not supported'#000+
+  '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
   '09035_E_Creation of Static Libraries not supported'#000+
   '09020_I_Closing script $1'#000+
-  '09021_E_Resource compiler "$1" not found, switching to external mode'#000+
+  '09021_E_Resource compiler "$1" not found, swit','ching to external mode'+
+  #000+
   '09022_I_Compiling resource $1'#000+
-  '09023_T_Unit $1 cannot be statically linked, sw','itching to smart link'+
-  'ing'#000+
+  '09023_T_Unit $1 cannot be statically linked, switching to smart linkin'+
+  'g'#000+
   '09024_T_Unit $1 cannot be smart linked, switching to static linking'#000+
-  '09025_T_Unit $1 cannot be shared linked, switching to static linking'#000+
+  '09025_T_Unit $1 cannot be shared linked, switch','ing to static linking'+
+  #000+
   '09026_E_Unit $1 cannot be smart or static linked'#000+
-  '09027_E_Unit $1 cannot be sha','red or static linked'#000+
+  '09027_E_Unit $1 cannot be shared or static linked'#000+
   '09028_D_Calling resource compiler "$1" with "$2" as command line'#000+
   '09029_E_Error while compiling resources'#000+
-  '09030_E_Can'#039't call the resource compiler "$1", switching to extern'+
-  'al mode'#000+
+  '09030_E_Can'#039't ','call the resource compiler "$1", switching to exte'+
+  'rnal mode'#000+
   '09031_E_Can'#039't open resource file "$1"'#000+
-  '09','032_E_Can'#039't write resource file "$1"'#000+
+  '09032_E_Can'#039't write resource file "$1"'#000+
   '09033_N_File "$1" not found for backquoted cat command'#000+
-  '09034_W_"$1" not found, this will probably cause a linking failure'#000+
+  '09034_W_"$1" not found, this will probably cause',' a linking failure'#000+
   '09128_F_Can'#039't post process executable $1'#000+
   '09129_F_Can'#039't open executable $1'#000+
-  '09130_X','_Size of Code: $1 bytes'#000+
+  '09130_X_Size of Code: $1 bytes'#000+
   '09131_X_Size of initialized data: $1 bytes'#000+
   '09132_X_Size of uninitialized data: $1 bytes'#000+
-  '09133_X_Stack space reserved: $1 bytes'#000+
+  '09133_X_Stack space reserved',': $1 bytes'#000+
   '09134_X_Stack space committed: $1 bytes'#000+
-  '09200_F_Executable image size is too big for $1 t','arget.'#000+
+  '09200_F_Executable image size is too big for $1 target.'#000+
   '09201_W_Object file "$1" contains 32-bit absolute relocation to symbol'+
   ' "$2".'#000+
-  '09202_E_Program segment too large (exceeds 64k by $1 bytes)'#000+
+  '09202_E_Program segment too large (exceeds 64k by $1 byt','es)'#000+
   '09203_E_Code segment "$1" too large (exceeds 64k by $2 bytes)'#000+
-  '09204_E_Data segment "$1" too larg','e (exceeds 64k by $2 bytes)'#000+
+  '09204_E_Data segment "$1" too large (exceeds 64k by $2 bytes)'#000+
   '09205_E_Segment "$1" too large (exceeds 64k by $2 bytes)'#000+
-  '09206_E_Group "$1" too large (exceeds 64k by $2 bytes)'#000+
+  '09206_E_Group "$1" too large (exceeds 64k by $2 bytes)'#000,
   '09207_E_Cannot create a .COM file, because the program contains segmen'+
   't relocations'#000+
-  '09208_W_Program ','"$1" uses experimental CheckPointer option'#000+
+  '09208_W_Program "$1" uses experimental CheckPointer option'#000+
   '09209_E_Multiple defined symbol "$1"'#000+
-  '09210_E_COMDAT selection mode $1 not supported (section: "$1")'#000+
+  '09210_E_COMDAT selection mode $1 not supported (section: "$1','")'#000+
   '09211_E_Associative section expected for COMDAT section "$1"'#000+
-  '09212_E_COMDAT section selection mod','e doesn'#039't match for section '+
-  '"$1" and symbol "$2"'#000+
+  '09212_E_COMDAT section selection mode doesn'#039't match for section "$'+
+  '1" and symbol "$2"'#000+
   '09213_E_Associative COMDAT section for section "$1" not found'#000+
-  '09214_D_Discarding duplicate symbol "$1" due to COMDAT selection mode'#000+
-  '09215_D_Discarding duplicate symbol "$1" with same size due',' to COMDA'+
-  'T selection mode'#000+
+  '09214_D_Discarding duplicate ','symbol "$1" due to COMDAT selection mod'+
+  'e'#000+
+  '09215_D_Discarding duplicate symbol "$1" with same size due to COMDAT '+
+  'selection mode'#000+
   '09216_D_Discarding duplicate symbol "$1" with same content due to COMD'+
   'AT selection mode'#000+
-  '09217_D_Replacing duplicate symbol "$1" with smaller size due to COMDA'+
-  'T selection mode'#000+
-  '09218_E_Size of duplicate COMDAT symbol',' "$1" differs'#000+
+  '09217_D_Replacing duplicat','e symbol "$1" with smaller size due to COM'+
+  'DAT selection mode'#000+
+  '09218_E_Size of duplicate COMDAT symbol "$1" differs'#000+
   '09219_E_Content of duplicate COMDAT symbol "$1" differs'#000+
   '09220_E_COMDAT selection mode for symbol "$1" differs'#000+
-  '09221_E_Undefined symbol: $1 (first seen in $2)'#000+
+  '09221_E_Undefine','d symbol: $1 (first seen in $2)'#000+
   '09222_E_Undefined symbol: $1'#000+
   '10000_T_Unitsearch: $1'#000+
-  '10001_T_PPU Load','ing $1'#000+
+  '10001_T_PPU Loading $1'#000+
   '10002_U_PPU Name: $1'#000+
   '10003_U_PPU Flags: $1'#000+
   '10004_U_PPU Crc: $1'#000+
   '10005_U_PPU Time: $1'#000+
   '10006_U_PPU File too short'#000+
-  '10007_U_PPU Invalid Header (no PPU at the begin)'#000+
+  '10007_U_PPU Invalid He','ader (no PPU at the begin)'#000+
   '10008_U_PPU Invalid Version $1'#000+
-  '10009_U_PPU is compiled for another proces','sor'#000+
+  '10009_U_PPU is compiled for another processor'#000+
   '10010_U_PPU is compiled for another target'#000+
   '10011_U_PPU Source: $1'#000+
   '10012_U_Writing $1'#000+
   '10013_F_Can'#039't Write PPU-File'#000+
-  '10014_F_Error reading PPU-File'#000+
+  '10014_F_Error reading ','PPU-File'#000+
   '10015_F_Unexpected end of PPU-File'#000+
   '10016_F_Invalid PPU-File entry: $1'#000+
-  '10017_F_PPU Dbx count',' problem'#000+
+  '10017_F_PPU Dbx count problem'#000+
   '10018_E_Illegal unit name: $1 (expecting $2)'#000+
   '10019_F_Too much units'#000+
   '10020_F_Circular unit reference between $1 and $2'#000+
-  '10021_F_Can'#039't compile unit $1, no sources available'#000+
+  '10021_F_Can'#039't',' compile unit $1, no sources available'#000+
   '10022_F_Can'#039't find unit $1 used by $2'#000+
-  '10023_W_Unit $1 was not',' found but $2 exists'#000+
+  '10023_W_Unit $1 was not found but $2 exists'#000+
   '10024_F_Unit $1 searched but $2 found'#000+
   '10025_W_Compiling the system unit requires the -Us switch'#000+
-  '10026_F_There were $1 errors compiling module, stopping'#000+
+  '10026_F_There were $1 e','rrors compiling module, stopping'#000+
   '10027_U_Load from $1 ($2) unit $3'#000+
-  '10028_U_Recompiling $1, checksum ','changed for $2'#000+
+  '10028_U_Recompiling $1, checksum changed for $2'#000+
   '10029_U_Recompiling $1, source found only'#000+
   '10030_U_Recompiling unit, static lib is older than ppufile'#000+
-  '10031_U_Recompiling unit, shared lib is older than ppufile'#000+
+  '10031_U_Recompiling unit',', shared lib is older than ppufile'#000+
   '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+
-  '1003','3_U_Recompiling unit, obj is older than asm'#000+
+  '10033_U_Recompiling unit, obj is older than asm'#000+
   '10034_U_Parsing interface of $1'#000+
   '10035_U_Parsing implementation of $1'#000+
-  '10036_U_Second load for unit $1'#000+
+  '10036_U_Second load for uni','t $1'#000+
   '10037_U_PPU Check file $1 time $2'#000+
-  '10040_W_Can'#039't recompile unit $1, but found modified include f','ile'+
-  's'#000+
+  '10040_W_Can'#039't recompile unit $1, but found modified include files'#000+
   '10041_U_File $1 is newer than the one used for creating PPU file $2'#000+
-  '10042_U_Trying to use a unit which was compiled with a different FPU m'+
-  'ode'#000+
+  '10042_U_Trying to use a unit which was compiled with a different FP','U'+
+  ' mode'#000+
   '10043_U_Loading interface units from $1'#000+
   '10044_U_Loading implementation units from $1'#000+
-  '10045_U_','Interface CRC changed for unit $1'#000+
+  '10045_U_Interface CRC changed for unit $1'#000+
   '10046_U_Implementation CRC changed for unit $1'#000+
   '10047_U_Finished compiling unit $1'#000+
-  '10048_U_Adding dependency: $1 depends on $2'#000+
+  '10048_U_Adding dependenc','y: $1 depends on $2'#000+
   '10049_U_No reload, is caller: $1'#000+
-  '10050_U_No reload, already in second compile: $','1'#000+
+  '10050_U_No reload, already in second compile: $1'#000+
   '10051_U_Flag for reload: $1'#000+
   '10052_U_Forced reloading'#000+
   '10053_U_Previous state of $1: $2'#000+
-  '10054_U_Already compiling $1, setting second compile'#000+
+  '10054_U_Already compiling $1, setting second compile',#000+
   '10055_U_Loading unit $1'#000+
   '10056_U_Finished loading unit $1'#000+
   '10057_U_Registering new unit $1'#000+
-  '10058_U_Re','-resolving unit $1'#000+
+  '10058_U_Re-resolving unit $1'#000+
   '10059_U_Skipping re-resolving unit $1, still loading used units'#000+
   '10060_U_Unloading resource unit $1 (not needed)'#000+
-  '10061_E_Unit $1 was compiled using a different whole program optimizat'+
-  'ion feedback input ($2, $3); recompile ','it without wpo or use the sam'+
+  '10061_E_U','nit $1 was compiled using a different whole program optimiz'+
+  'ation feedback input ($2, $3); recompile it without wpo or use the sam'+
   'e wpo feedback input file for this compilation invocation'#000+
-  '10062_U_Indirect interface (objects/classes) CRC changed for unit $1'#000+
+  '10062_U_Indirect interface (objects/classes) CRC chan','ged for unit $1'+
+  #000+
   '10063_U_PPU is compiled for another i8086 memory model'#000+
-  '10064_U_Loading unit $1 from ','package $2'#000+
+  '10064_U_Loading unit $1 from package $2'#000+
   '10065_F_Internal type "$1" was not found. Check if you use the correct'+
   ' run time library.'#000+
-  '10066_F_Internal type "$1" does not look as expected. Check if you use'+
-  ' the correct run time library.'#000+
-  '10067_U_Skipping unit, PPU and compiler',' have to be both compiled wit'+
-  'h or without LLVM support'#000+
+  '10066_F_Internal type "$1" does not look',' as expected. Check if you u'+
+  'se the correct run time library.'#000+
+  '10067_U_Skipping unit, PPU and compiler have to be both compiled with '+
+  'or without LLVM support'#000+
   '11000_O_$1 [options] <inputfile> [options]'#000+
-  '11001_W_Only one source file supported, changing source file to compil'+
-  'e from "$1" into "$2"'#000+
+  '11001_W_Only one source file supported, ch','anging source file to comp'+
+  'ile from "$1" into "$2"'#000+
   '11002_W_DEF file can be created only for OS/2'#000+
-  '1100','3_E_Nested response files are not supported'#000+
+  '11003_E_Nested response files are not supported'#000+
   '11004_F_No source file name in command line'#000+
   '11005_N_No option inside $1 config file'#000+
-  '11006_E_Illegal parameter: $1'#000+
+  '11006_E_Ille','gal parameter: $1'#000+
   '11007_H_-? writes help pages'#000+
   '11008_F_Too many config files nested'#000+
-  '11009_F_Unable t','o open file $1'#000+
+  '11009_F_Unable to open file $1'#000+
   '11010_D_Reading further options from $1'#000+
   '11011_W_Target is already set to: $1'#000+
-  '11012_W_Shared libs not supported on DOS platform, reverting to static'+
-  #000+
+  '11012_W_Shared libs not supported on DOS platfor','m, reverting to stat'+
+  'ic'#000+
   '11013_F_In options file $1 at line $2 too many #IF(N)DEFs encountered'#000+
-  '11014_F','_In options file $1 at line $2 unexpected #ENDIFs encountered'+
-  #000+
+  '11014_F_In options file $1 at line $2 unexpected #ENDIFs encountered'#000+
   '11015_F_Open conditional at the end of the options file'#000+
-  '11016_W_Debug information generation is not supported by this executab'+
-  'le'#000+
+  '11016_W_Debug informat','ion generation is not supported by this execut'+
+  'able'#000+
   '11017_H_Try recompiling with -dGDB'#000+
-  '11018_W_You ar','e using the obsolete switch $1'#000+
+  '11018_W_You are using the obsolete switch $1'#000+
   '11019_W_You are using the obsolete switch $1, please use $2'#000+
-  '11020_N_Switching assembler to default source writing assembler'#000+
+  '11020_N_Switching assembler to default source wri','ting assembler'#000+
   '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
-  '11022_W_"$1" assem','bler use forced'#000+
+  '11022_W_"$1" assembler use forced'#000+
   '11026_T_Reading options from file $1'#000+
   '11027_T_Reading options from environment $1'#000+
   '11028_D_Handling option "$1"'#000+
-  '11029_O_*** press enter ***'#000+
+  '11029_O_*** pr','ess enter ***'#000+
   '11030_H_Start of reading config file $1'#000+
   '11031_H_End of reading config file $1'#000+
-  '11032_D_','Interpreting option "$1"'#000+
+  '11032_D_Interpreting option "$1"'#000+
   '11036_D_Interpreting firstpass option "$1"'#000+
   '11033_D_Interpreting file option "$1"'#000+
   '11034_D_Reading config file "$1"'#000+
-  '11035_D_Found source file name "$1"'#000+
+  '1','1035_D_Found source file name "$1"'#000+
   '11039_E_Unknown codepage "$1"'#000+
-  '11040_F_Config file $1 is a directo','ry'#000+
+  '11040_F_Config file $1 is a directory'#000+
   '11041_W_Assembler output selected "$1" cannot generate debug info, deb'+
   'ugging disabled'#000+
-  '11042_W_Use of ppc386.cfg is deprecated, please use fpc.cfg instead'#000+
+  '11042_W_Use of ppc386.cfg is deprecated, please use',' fpc.cfg instead'#000+
   '11043_F_In options file $1 at line $2 #ELSE directive without #IF(N)DE'+
   'F found'#000+
-  '11044','_F_Option "$1" is not, or not yet, supported on the current tar'+
-  'get platform'#000+
-  '11045_F_The feature "$1" is not, or not yet, supported on the selected'+
-  ' target platform'#000+
+  '11044_F_Option "$1" is not, or not yet, supported on the current targe'+
+  't platform'#000+
+  '11045_F_The feature "$1" is not, or not yet, supported on the se','lect'+
+  'ed target platform'#000+
   '11046_N_DWARF debug information cannot be used with smart linking on t'+
-  'his tar','get, switching to static linking'#000+
+  'his target, switching to static linking'#000+
   '11047_W_Option "$1" is ignored for the current target platform.'#000+
-  '11048_W_Disabling external debug information because it is unsupported'+
-  ' for the selected target/debug format combination.'#000+
-  '11049_N_DWARF debug in','formation cannot be used with smart linking wi'+
-  'th external assembler, disabling static library creation.'#000+
-  '11050_E_Invalid value for MACOSX_DEPLOYMENT_TARGET environment variabl'+
-  'e: $1'#000+
-  '11051_E_Invalid value for IPHONEOS_DEPLOYMENT_TARGET environ','ment var'+
-  'iable: $1'#000+
+  '11048_W_Disabling external debug informatio','n because it is unsupport'+
+  'ed for the selected target/debug format combination.'#000+
+  '11049_N_DWARF debug information cannot be used with smart linking with'+
+  ' external assembler, disabling static library creation.'#000+
+  '11050_E_Invalid value for MACOSX_DEP','LOYMENT_TARGET environment varia'+
+  'ble: $1'#000+
+  '11051_E_Invalid value for IPHONEOS_DEPLOYMENT_TARGET environment varia'+
+  'ble: $1'#000+
   '11052_E_You must use a FPU type of VFPV2, VFPV3 or VFPV3_D16 when usin'+
   'g the EABIHF ABI target'#000+
-  '11053_W_The selected debug format is not supported on the current targ'+
-  'et, not changing the current setting'#000+
-  '11054_E_Argument to "','$1" is missing'#000+
+  '11053_W_The selected debug f','ormat is not supported on the current ta'+
+  'rget, not changing the current setting'#000+
+  '11054_E_Argument to "$1" is missing'#000+
   '11055_E_Malformed parameter: $1'#000+
   '11056_W_Smart linking requires external linker'#000+
-  '11057_E_Creating .COM files is not supported in the current memory mod'+
-  'el. Only the tiny memory model supports making .COM files.'#000+
-  '11058_W_Experimen','tal CheckPointer option not enabled because it is i'+
-  'ncomptatible with -Ur option.'#000+
-  '11059_E_Unsupported target architecture -P$1, invoke the "fpc" compile'+
-  'r driver instead.'#000+
+  '11057_E_Creating .COM files is not supported i','n the current memory m'+
+  'odel. Only the tiny memory model supports making .COM files.'#000+
+  '11058_W_Experimental CheckPointer option not enabled because it is inc'+
+  'omptatible with -Ur option.'#000+
+  '11059_E_Unsupported target architecture -P$1, invoke the "f','pc" compi'+
+  'ler driver instead.'#000+
   '11060_E_Feature switches are only supported while compiling the system'+
-  ' ','unit.'#000+
+  ' unit.'#000+
   '11061_N_The selected debug format is not supported by the internal lin'+
   'ker, switching to external linking'#000+
-  '12000_F_Cannot open whole program optimization feedback file "$1"'#000+
-  '12001_D_Processing whole program optimization information in wp','o fee'+
-  'dback file "$1"'#000+
+  '12000_F_Cannot open whole pro','gram optimization feedback file "$1"'#000+
+  '12001_D_Processing whole program optimization information in wpo feedb'+
+  'ack file "$1"'#000+
   '12002_D_Finished processing the whole program optimization information'+
   ' in wpo feedback file "$1"'#000+
-  '12003_E_Expected section header, but got "$2" at line $1 of wpo feedba'+
-  'ck file'#000+
-  '12004_W_No handler registered for whole prog','ram optimization section'+
-  ' "$2" at line $1 of wpo feedback file, ignoring'#000+
-  '12005_D_Found whole program optimization section "$1" with information'+
-  ' about "$2"'#000+
+  '12003_E_Expected secti','on header, but got "$2" at line $1 of wpo feed'+
+  'back file'#000+
+  '12004_W_No handler registered for whole program optimization section "'+
+  '$2" at line $1 of wpo feedback file, ignoring'#000+
+  '12005_D_Found whole program optimization section "$1" with informati','o'+
+  'n about "$2"'#000+
   '12006_F_The selected whole program optimizations require a previously '+
-  'generated feedba','ck file (use -Fw to specify)'#000+
+  'generated feedback file (use -Fw to specify)'#000+
   '12007_E_No collected information necessary to perform "$1" whole progr'+
   'am optimization found'#000+
-  '12008_F_Specify a whole program optimization feedback file to store th'+
-  'e generated info in (using -FW)'#000+
-  '12009_E_Not gener','ating any whole program optimization information, y'+
-  'et a feedback file was specified (using -FW)'#000+
-  '12010_E_Not performing any whole program optimizations, yet an input f'+
-  'eedback file was specified (using -Fw)'#000+
-  '12011_D_Skipping whole program opti','mization section "$1", because no'+
-  't needed by the requested optimizations'#000+
-  '12012_W_Overriding previously read information for "$1" from feedback '+
-  'input file using information in section "$2"'#000+
-  '12013_E_Cannot extract symbol liveness information f','rom program when'+
-  ' stripping symbols, use -Xs-'#000+
+  '12008_F_Specify a w','hole program optimization feedback file to store '+
+  'the generated info in (using -FW)'#000+
+  '12009_E_Not generating any whole program optimization information, yet'+
+  ' a feedback file was specified (using -FW)'#000+
+  '12010_E_Not performing any whole program opt','imizations, yet an input'+
+  ' feedback file was specified (using -Fw)'#000+
+  '12011_D_Skipping whole program optimization section "$1", because not '+
+  'needed by the requested optimizations'#000+
+  '12012_W_Overriding previously read information for "$1" from feedba','c'+
+  'k input file using information in section "$2"'#000+
+  '12013_E_Cannot extract symbol liveness information from program when s'+
+  'tripping symbols, use -Xs-'#000+
   '12014_E_Cannot extract symbol liveness information from program when w'+
   'hen not linking'#000+
-  '12015_F_Cannot find "$1" or "$2" to extract symbol liveness informatio'+
-  'n from linked program'#000+
-  '12016_E_Error dur','ing reading symbol liveness information produced by'+
-  ' "$1"'#000+
-  '12017_F_Error executing "$1" (exitcode: $2) to extract symbol informat'+
+  '12015_F_C','annot find "$1" or "$2" to extract symbol liveness informat'+
   'ion from linked program'#000+
+  '12016_E_Error during reading symbol liveness information produced by "'+
+  '$1"'#000+
+  '12017_F_Error executing "$1" (exitcode: $2) to extract symbol informat'+
+  'ion from link','ed program'#000+
   '12018_E_Collection of symbol liveness information can only help when u'+
-  'sing smart linking,',' use -CX -XX'#000+
+  'sing smart linking, use -CX -XX'#000+
   '12019_E_Cannot create specified whole program optimisation feedback fi'+
   'le "$1"'#000+
   '13001_F_Can'#039't find package $1'#000+
-  '13002_U_PCP file for package $1 found'#000+
+  '13002_U_PCP file fo','r package $1 found'#000+
   '13003_E_Duplicate package $1'#000+
   '13004_E_Unit $1 can not be part of a package'#000+
-  '13005_N','_Unit $1 is implicitely imported into package $2'#000+
+  '13005_N_Unit $1 is implicitely imported into package $2'#000+
   '13006_F_Failed to create PCP file $2 for package $1'#000+
-  '13007_F_Failed to read PCP file for package $1'#000+
+  '13007_F_Failed to read PCP file for pac','kage $1'#000+
   '13008_T_PCP loading $1'#000+
   '13009_U_PCP Name: $1'#000+
   '13010_U_PCP Flags: $1'#000+
   '13011_U_PCP Crc: $1'#000+
-  '13012_','U_PCP Time: $1'#000+
+  '13012_U_PCP Time: $1'#000+
   '13013_U_PCP File too short'#000+
   '13014_U_PCP Invalid Header (no PCP at the begin)'#000+
   '13015_U_PCP Invalid Version $1'#000+
-  '13016_U_PCP is compiled for another processor'#000+
+  '13016_U_PCP is com','piled for another processor'#000+
   '13017_U_PCP is compiled for another target'#000+
   '13018_U_Writing $1'#000+
-  '13019_F_Ca','n'#039't Write PCP-File'#000+
+  '13019_F_Can'#039't Write PCP-File'#000+
   '13020_F_Error reading PCP-File'#000+
   '13021_F_Unexpected end of PCP-File'#000+
   '13022_F_Invalid PCP-File entry: $1'#000+
-  '13023_U_Trying to use a unit which was compiled with a different FPU m'+
-  'ode'#000+
+  '13023_U_Trying to us','e a unit which was compiled with a different FPU'+
+  ' mode'#000+
   '13024_T_Packagesearch: $1'#000+
-  '13025_U_Required pac','kage $1'#000+
+  '13025_U_Required package $1'#000+
   '13026_U_Contained unit $1'#000+
   '13027_E_Unit $1 is already contained in package $2'#000+
-  '13028_W_Unit $1 is imported from indirectly required package $2'#000+
+  '13028_W_Unit $1 is imported from indirectly required pa','ckage $2'#000+
   '13029_U_PPL filename $1'#000+
-  '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $','F'+
-  'PCCPU'#010+
+  '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+
+  'CPU'#010+
   'Copyright (c) 1993-2020 by Florian Klaempfl and others'#000+
   '11024_Free Pascal Compiler version $FPCVERSION'#010+
   #010+
-  'Compiler date      : $FPCDATE'#010+
+  'Compiler date      : $FPCDATE'#010,
   'Compiler CPU target: $FPCCPU'#010+
   #010+
   'Supported targets (targets marked with '#039'{*}'#039' are under develop'+
   'ment):'#010+
-  ' ',' $OSTARGETS'#010+
+  '  $OSTARGETS'#010+
   #010+
   'Supported CPU instruction sets:'#010+
   '  $INSTRUCTIONSETS'#010+
@@ -1408,13 +1412,13 @@ const msgtxt : array[0..000358,1..240] of char=(
   'Supported FPU instruction sets:'#010+
   '  $FPUINSTRUCTIONSETS'#010+
   #010+
-  'Supported inline assembler modes:'#010+
+  'Supported inline ass','embler modes:'#010+
   '  $ASMMODES'#010+
   #010+
   'Recognized compiler and RTL features:'#010+
   '  $FEATURELIST'#010+
   #010+
-  'Recognized modeswit','ches:'#010+
+  'Recognized modeswitches:'#010+
   '  $MODESWITCHES'#010+
   #010+
   'Supported ABI targets:'#010+
@@ -1423,407 +1427,408 @@ const msgtxt : array[0..000358,1..240] of char=(
   'Supported Optimizations:'#010+
   '  $OPTIMIZATIONS'#010+
   #010+
-  'Supported Whole Program Optimizations:'#010+
+  'Supported Whole Program Optimization','s:'#010+
   '  All'#010+
   '  $WPOPTIMIZATIONS'#010+
   #010+
   'Code Generation Backend'#010+
   '  $CODEGENERATIONBACKEND'#010+
   #010+
-  'Supported Microcontro','ller types:$\n  $CONTROLLERTYPES$\n'#010+
+  'Supported Microcontroller types:$\n  $CONTROLLERTYPES$\n'#010+
   'This program comes under the GNU General Public Licence'#010+
   'For more information read COPYING.v2'#010+
   #010+
-  'Please report bugs in our bug tracker on:'#010+
+  'Please rep','ort bugs in our bug tracker on:'#010+
   '                 https://bugs.freepascal.org'#010+
   #010+
-  'More information may b','e found on our WWW pages (including directions'+
-  #010+
+  'More information may be found on our WWW pages (including directions'#010+
   'for mailing lists useful for asking questions or discussing potential'#010+
   'new features, etc.):'#010+
-  '                 https://www.freepascal.org'#000+
-  '11025_F*0*_Only options valid for the default or selected ','platform a'+
-  're listed.'#010+
+  '  ','               https://www.freepascal.org'#000+
+  '11025_F*0*_Only options valid for the default or selected platform are'+
+  ' listed.'#010+
   '**0*_Put + after a boolean switch option to enable it, - to disable it'+
   '.'#010+
-  '**1@<x>_Read compiler options from <x> in addition to the default fpc.'+
-  'cfg'#010+
+  '**1@<x>_Read compiler options from <x> in addit','ion to the default fp'+
+  'c.cfg'#010+
   '**1a_The compiler does not delete the generated assembler file'#010+
-  '**2a5_Don'#039,'t generate Big Obj COFF files for GNU Binutils older th'+
-  'an 2.25 (Windows, NativeNT)'#010+
+  '**2a5_Don'#039't generate Big Obj COFF files for GNU Binutils older tha'+
+  'n 2.25 (Windows, NativeNT)'#010+
   '**2al_List sourcecode lines in assembler file'#010+
-  '**2an_List node info in assembler file (-dEXTDEBUG compiler)'#010+
-  '**2ao_Add an extra option to external assembler ca','ll (ignored for in'+
-  'ternal)'#010+
+  '**2an_List ','node info in assembler file (-dEXTDEBUG compiler)'#010+
+  '**2ao_Add an extra option to external assembler call (ignored for inte'+
+  'rnal)'#010+
   '*L2ap_Use pipes instead of creating temporary assembler files'#010+
-  '**2ar_List register allocation/release info in assembler file'#010+
+  '**2ar_List register allocation/release info in assem','bler file'#010+
   '**2at_List temp allocation/release info in assembler file'#010+
   '**1A<x>_Output format:'#010+
-  '**2Adefau','lt_Use default assembler'#010+
+  '**2Adefault_Use default assembler'#010+
   '3*2Aas_Assemble using GNU AS'#010+
   '3*2Aas-darwin_Assemble Darwin Mach-O using GNU GAS'#010+
-  '3*2Amacho_Mach-O (Darwin, Intel 32 bit) using internal writer'#010+
+  '3*2Amacho_Mach-O (Darwin, Intel 32 ','bit) using internal writer'#010+
   '8*2Anasm_Assemble using Nasm'#010+
   '8*2Anasmobj_Assemble using Nasm'#010+
-  '3*2Anasm_Ass','emble using Nasm'#010+
+  '3*2Anasm_Assemble using Nasm'#010+
   '3*2Anasmcoff_COFF (Go32v2) file using Nasm'#010+
   '3*2Anasmelf_ELF32 (Linux) file using Nasm'#010+
-  '3*2Anasmwin32_Win32 object file using Nasm'#010+
+  '3*2Anasmwin32_Win32 object file using ','Nasm'#010+
   '3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+
-  '3*2Anasmdarwin_macho32 object file using Nasm ','(experimental)'#010+
+  '3*2Anasmdarwin_macho32 object file using Nasm (experimental)'#010+
   '3*2Awasm_Obj file using Wasm (Watcom)'#010+
   '3*2Anasmobj_Obj file using Nasm'#010+
   '3*2Amasm_Obj file using Masm (Microsoft)'#010+
-  '3*2Atasm_Obj file using Tasm (Borland)'#010+
+  '3*2Atasm_Obj f','ile using Tasm (Borland)'#010+
   '3*2Aelf_ELF (Linux) using internal writer'#010+
-  '3*2Acoff_COFF (Go32v2) using inte','rnal writer'#010+
+  '3*2Acoff_COFF (Go32v2) using internal writer'#010+
   '3*2Apecoff_PE-COFF (Win32) using internal writer'#010+
   '3*2Ayasm_Assemble using Yasm (experimental)'#010+
   '4*2Aas_Assemble using GNU AS'#010+
-  '4*2Agas_Assemble using GNU GAS'#010+
+  '4*2Aga','s_Assemble using GNU GAS'#010+
   '4*2Aas-darwin_Assemble Darwin Mach-O using GNU GAS'#010+
-  '4*2Amasm_Win64 object fi','le using ml64 (Microsoft)'#010+
+  '4*2Amasm_Win64 object file using ml64 (Microsoft)'#010+
   '4*2Apecoff_PE-COFF (Win64) using internal writer'#010+
   '4*2Aelf_ELF (Linux-64bit) using internal writer'#010+
-  '4*2Ayasm_Assemble using Yasm (experimental)'#010+
+  '4*2Ayasm_Assemble',' using Yasm (experimental)'#010+
   '4*2Anasm_Assemble using Nasm (experimental)'#010+
-  '4*2Anasmwin64_Assemble Win64 ','object file using Nasm (experimental)'#010+
+  '4*2Anasmwin64_Assemble Win64 object file using Nasm (experimental)'#010+
   '4*2Anasmelf_Assemble Linux-64bit object file using Nasm (experimental)'+
   #010+
-  '4*2Anasmdarwin_Assemble darwin macho64 object file using Nasm (experim'+
-  'ental)'#010+
+  '4*2Anasmdarwin_Assemble darwin ','macho64 object file using Nasm (exper'+
+  'imental)'#010+
   '6*2Aas_Unix o-file using GNU AS'#010+
-  '6*2Agas_GNU Motorola a','ssembler'#010+
+  '6*2Agas_GNU Motorola assembler'#010+
   '6*2Amit_MIT Syntax (old GAS)'#010+
   '6*2Amot_Standard Motorola assembler'#010+
   '6*2Avasm_Use vasm to assemble'#010+
   'A*2Aas_Assemble using GNU AS'#010+
-  'P*2Aas_Assemble using GNU AS'#010+
+  'P*2Aas_','Assemble using GNU AS'#010+
   'S*2Aas_Assemble using GNU AS'#010+
   'Z*2Asdcc-sdasz80_Assemble using SDCC-SDASZ80'#010+
-  'Z*2A','z80asm_Assemble using z80asm'#010+
+  'Z*2Az80asm_Assemble using z80asm'#010+
   '**1b_Generate browser info'#010+
   '**2bl_Generate local symbol info'#010+
   '**1B_Build all modules'#010+
-  '**1C<x>_Code generation options:'#010+
+  '**1C<x>_Code generation opti','ons:'#010+
   '**2C3_Turn on ieee error checking for constants'#010+
-  '**2Ca<x>_Select ABI; see fpc -i or fpc -ia for ','possible values'#010+
+  '**2Ca<x>_Select ABI; see fpc -i or fpc -ia for possible values'#010+
   '**2Cb_Generate code for a big-endian variant of the target architectur'+
   'e'#010+
   '**2Cc<x>_Set default calling convention to <x>'#010+
-  '**2CD_Create also dynamic library (not supported)'#010+
-  '**2Ce_Compilation with emulated floating point opcodes'#010,
+  '**2CD','_Create also dynamic library (not supported)'#010+
+  '**2Ce_Compilation with emulated floating point opcodes'#010+
   '**2CE_Generate FPU code which can raise exceptions'#010+
   '**2Cf<x>_Select fpu instruction set to use; see fpc -i or fpc -if for '+
   'possible values'#010+
-  '**2CF<x>_Minimal floating point constant precision (default, 32, 64)'#010+
+  '**2','CF<x>_Minimal floating point constant precision (default, 32, 64)'+
+  #010+
   '**2Cg_Generate PIC code'#010+
-  '**2Ch<n>[,','m]_<n> bytes min heap size (between 1023 and 67107840) and'+
-  ' optionally [m] max heap size'#010+
+  '**2Ch<n>[,m]_<n> bytes min heap size (between 1023 and 67107840) and o'+
+  'ptionally [m] max heap size'#010+
   '**2Ci_IO-checking'#010+
-  'A*2CI<x>_Select instruction set on ARM: ARM or THUMB'#010+
+  'A*2CI<x>_Select instruction set on',' ARM: ARM or THUMB'#010+
   'L*2Cl<x>_LLVM code generation options'#010+
-  'L*3Clflto_Enable Link-time optimisation (ne','eded both when compiling '+
-  'units and programs/libraries)'#010+
+  'L*3Clflto_Enable Link-time optimisation (needed both when compiling un'+
+  'its and programs/libraries)'#010+
   'L*3Clfltonosystem_Disable LTO for the system unit (needed with at leas'+
-  't Xcode 10.2 and earlier due to linker bugs)'#010+
+  't Xcode 10.2 an','d earlier due to linker bugs)'#010+
   'L*3Clv<x>_LLVM target version: Xcode-10.1, 7.0, 8.0, .., 10.0'#010+
-  '**2Cn_Om','it linking stage'#010+
+  '**2Cn_Omit linking stage'#010+
   'P*2CN_Generate nil-pointer checks (AIX-only)'#010+
   '**2Co_Check overflow of integer operations'#010+
-  '**2CO_Check for possible overflow of integer operations'#010+
+  '**2CO_Check for possible overflow o','f integer operations'#010+
   '**2Cp<x>_Select instruction set; see fpc -i or fpc -ic for possible va'+
   'lues'#010+
-  '**2C','P<x>=<y>_ packing settings'#010+
+  '**2CP<x>=<y>_ packing settings'#010+
   '**3CPPACKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, 4 '+
   'and 8'#010+
-  '**3CPPACKENUM=<y>_ <y> enum packing: 0, 1, 2 and 4 or DEFAULT or NORMA'+
-  'L'#010+
-  '**3CPPACKRECORD=<y>_ <y> record packing: 0 or DEFAULT or NORMAL, ','1, '+
-  '2, 4, 8, 16 and 32'#010+
+  '**3CPPACKENUM=<y>_ <y> enum packing: ','0, 1, 2 and 4 or DEFAULT or NOR'+
+  'MAL'#010+
+  '**3CPPACKRECORD=<y>_ <y> record packing: 0 or DEFAULT or NORMAL, 1, 2,'+
+  ' 4, 8, 16 and 32'#010+
   '**2Cr_Range checking'#010+
   '**2CR_Verify object method call validity'#010+
   '**2Cs<n>_Set stack checking size to <n>'#010+
-  '**2Ct_Stack checking (for testing only, see manual)'#010+
+  '**2Ct_Stack chec','king (for testing only, see manual)'#010+
   '8*2CT<x>_Target-specific code generation options'#010+
-  '3*2CT<x>_Target','-specific code generation options'#010+
+  '3*2CT<x>_Target-specific code generation options'#010+
   '4*2CT<x>_Target-specific code generation options'#010+
   'p*2CT<x>_Target-specific code generation options'#010+
-  'P*2CT<x>_Target-specific code generation options'#010+
+  'P*2CT<x>','_Target-specific code generation options'#010+
   'J*2CT<x>_Target-specific code generation options'#010+
-  'A*2CT<x>_T','arget-specific code generation options'#010+
+  'A*2CT<x>_Target-specific code generation options'#010+
   'p*3CTsmalltoc_ Generate smaller TOCs at the expense of execution speed'+
   ' (AIX)'#010+
-  'P*3CTsmalltoc_ Generate smaller TOCs at the expense of execution speed'+
-  ' (AIX)'#010+
-  'J*3CTautogetterprefix=X_  Automatically create ','getters for propertie'+
-  's with prefix X (empty string disables)'#010+
-  'J*3CTautosetterprefix=X_  Automatically create setters for properties '+
+  'P*3CTsmalltoc_ Generate ','smaller TOCs at the expense of execution spe'+
+  'ed (AIX)'#010+
+  'J*3CTautogetterprefix=X_  Automatically create getters for properties '+
   'with prefix X (empty string disables)'#010+
+  'J*3CTautosetterprefix=X_  Automatically create setters for properties '+
+  'with pref','ix X (empty string disables)'#010+
   '8*3CTcld_                 Emit a CLD instruction before using the x86 '+
-  's','tring instructions'#010+
-  '3*3CTcld_                 Emit a CLD instruction before using the x86 '+
   'string instructions'#010+
-  '4*3CTcld_                 Emit a CLD instruction before using the x86 '+
+  '3*3CTcld_                 Emit a CLD instruction before using the x86 '+
   'string instructions'#010+
-  '8*3CTfarprocspushoddbp_       Increment B','P before pushing it in the '+
-  'prologue of far functions'#010+
+  '4*3CTcld_                 Emit ','a CLD instruction before using the x8'+
+  '6 string instructions'#010+
+  '8*3CTfarprocspushoddbp_       Increment BP before pushing it in the pr'+
+  'ologue of far functions'#010+
   'J*3CTcompactintarrayinit_ Generate smaller (but potentially slower) co'+
-  'de for initializing integer array constants'#010+
+  'de for initializi','ng integer array constants'#010+
   'J*3CTenumfieldinit_       Initialize enumeration fields in constructor'+
-  's t','o enumtype(0), after calling inherited constructors'#010+
+  's to enumtype(0), after calling inherited constructors'#010+
   'J*3CTinitlocals_          Initialize local variables that trigger a JV'+
-  'M bytecode verification error if used uninitialized (slows down code)'#010+
-  'J*3CTlowercaseprocstart_  Lowercase the first ch','aracter of procedure'+
-  '/function/method names'#010+
+  'M bytecode verific','ation error if used uninitialized (slows down code'+
+  ')'#010+
+  'J*3CTlowercaseprocstart_  Lowercase the first character of procedure/f'+
+  'unction/method names'#010+
   'A*3CTthumbinterworking_ Generate Thumb interworking-safe code if possi'+
   'ble'#010+
-  'J*2Cv_Var/out parameter copy-out checking'#010+
+  'J*2Cv_Var/out parameter',' copy-out checking'#010+
   'A*2CV<x>_Set section threadvar model to <x>'#010+
-  '**2CX_Create also smartlinked library',#010+
+  '**2CX_Create also smartlinked library'#010+
   '**1d<x>_Defines the symbol <x>'#010+
   '**1D_Generate a DEF file'#010+
   '**2Dd<x>_Set description to <x>'#010+
   '**2Dv<x>_Set DLL version to <x>'#010+
-  '*O2Dw_PM application'#010+
+  '*O2Dw_PM applicatio','n'#010+
   '**1e<x>_Set path to executable'#010+
   '**1E_Same as -Cn'#010+
   '**1fPIC_Same as -Cg'#010+
-  '**1F<x>_Set file names and pat','hs:'#010+
+  '**1F<x>_Set file names and paths:'#010+
   '**2Fa<x>[,y]_(for a program) load units <x> and [y] before uses is par'+
   'sed'#010+
   '**2Fc<x>_Set input codepage to <x>'#010+
-  '**2FC<x>_Set RC compiler binary name to <x>'#010+
+  '**2FC<x>_Set RC compiler bi','nary name to <x>'#010+
   '**2Fd_Disable the compiler'#039's internal directory cache'#010+
-  '**2FD<x>_Set the directory wh','ere to search for compiler utilities'#010+
+  '**2FD<x>_Set the directory where to search for compiler utilities'#010+
   '**2Fe<x>_Redirect error output to <x>'#010+
   '**2FE<x>_Set exe/unit output path to <x>'#010+
-  '**2Ff<x>_Add <x> to framework path (Darwin only), or set IDF path to <'+
-  'x> (Xtensa-FreeRTOS)'#010+
-  '**2FF_Use fpcres as RC to RES com','piler instead of windres or gorc'#010+
+  '**2Ff<x>_Add <x> to fram','ework path (Darwin only), or set IDF path to'+
+  ' <x> (Xtensa-FreeRTOS)'#010+
+  '**2FF_Use fpcres as RC to RES compiler instead of windres or gorc'#010+
   '**2Fi<x>_Add <x> to include path'#010+
   '**2Fl<x>_Add <x> to library path'#010+
   '**2FL<x>_Use <x> as dynamic linker'#010+
-  '**2Fm<x>_Load unicode conversion table from <x>.txt in the compiler di'+
-  'r'#010+
-  '**2FM<x>_Set the directory where t','o search for unicode binary files'#010+
+  '**2Fm<','x>_Load unicode conversion table from <x>.txt in the compiler '+
+  'dir'#010+
+  '**2FM<x>_Set the directory where to search for unicode binary files'#010+
   '**2FN<x>_Add <x> to list of default unit scopes (namespaces)'#010+
   '**2Fo<x>_Add <x> to object path'#010+
-  '**2Fr<x>_Load error message file <x>'#010+
+  '**2Fr<x>_Load',' error message file <x>'#010+
   '**2FR<x>_Set resource (.res) linker to <x>'#010+
   '**2Fu<x>_Add <x> to unit path'#010+
-  '**2','FU<x>_Set unit output path to <x>, overrides -FE'#010+
+  '**2FU<x>_Set unit output path to <x>, overrides -FE'#010+
   '**2FW<x>_Store generated whole-program optimization feedback in <x>'#010+
-  '**2Fw<x>_Load previously stored whole-program optimization feedback fr'+
-  'om <x>'#010+
-  '*g1g_Generate debug information (default forma','t for target)'#010+
+  '**2Fw<x>_Load previousl','y stored whole-program optimization feedback '+
+  'from <x>'#010+
+  '*g1g_Generate debug information (default format for target)'#010+
   '*g2gc_Generate checks for pointers (experimental, only available on so'+
   'me targets, might generate false positive)'#010+
-  '*g2gh_Use heaptrace unit (for memory leak/corruption debugging)'#010+
-  '*g2gl_Use line info unit (show more info with bac','ktraces)'#010+
+  '*g2gh_Use hea','ptrace unit (for memory leak/corruption debugging)'#010+
+  '*g2gl_Use line info unit (show more info with backtraces)'#010+
   '*g2gm_Generate Microsoft CodeView debug information (experimental)'#010+
   '*g2go<x>_Set debug information options'#010+
-  '*g3godwarfsets_ Enable DWARF '#039'set'#039' type debug information (bre'+
-  'aks gdb < 6.5)'#010+
-  '*g3gostabsabsincludes_ Store absolute/full inclu','de file paths in Sta'+
-  'bs'#010+
+  '*g3godwarfsets_ Enable DW','ARF '#039'set'#039' type debug information (b'+
+  'reaks gdb < 6.5)'#010+
+  '*g3gostabsabsincludes_ Store absolute/full include file paths in Stabs'+
+  #010+
   '*g3godwarfmethodclassprefix_ Prefix method names in DWARF with class n'+
   'ame'#010+
-  '*g3godwarfcpp_ Simulate C++ debug information in DWARF'#010+
+  '*g3godwarfcpp_ Simulate C++ debug informati','on in DWARF'#010+
   '*g3godwarfomflinnum_ Generate line number information in OMF LINNUM re'+
-  'cords in MS LINK f','ormat in addition to the DWARF debug information ('+
-  'Open Watcom Debugger/Linker compatibility)'#010+
+  'cords in MS LINK format in addition to the DWARF debug information (Op'+
+  'en Watcom Debugger/Linker compatibility)'#010+
   '*g2gp_Preserve case in stabs symbol names'#010+
-  '*g2gs_Generate Stabs debug information'#010+
-  '*g2gt_Trash local variables (to detect uninitialized uses; multipl','e '+
-  #039't'#039' changes the trashing value)'#010+
+  '*g2gs','_Generate Stabs debug information'#010+
+  '*g2gt_Trash local variables (to detect uninitialized uses; multiple '#039+
+  't'#039' changes the trashing value)'#010+
   '*g2gv_Generates programs traceable with Valgrind'#010+
   '*g2gw_Generate DWARFv2 debug information (same as -gw2)'#010+
-  '*g2gw2_Generate DWARFv2 debug information'#010+
+  '*','g2gw2_Generate DWARFv2 debug information'#010+
   '*g2gw3_Generate DWARFv3 debug information'#010+
-  '*g2gw4_Generate D','WARFv4 debug information (experimental)'#010+
+  '*g2gw4_Generate DWARFv4 debug information (experimental)'#010+
   '**1i_Information'#010+
   '**2iD_Return compiler date'#010+
   '**2iSO_Return compiler OS'#010+
-  '**2iSP_Return compiler host processor'#010+
+  '**2iSP_Return compiler host pr','ocessor'#010+
   '**2iTO_Return target OS'#010+
   '**2iTP_Return target processor'#010+
   '**2iV_Return short compiler version'#010+
-  '*','*2iW_Return full compiler version'#010+
+  '**2iW_Return full compiler version'#010+
   '**2ia_Return list of supported ABI targets'#010+
   '**2ib_Return the used code generation backend type'#010+
-  '**2ic_Return list of supported CPU instruction sets'#010+
+  '**2ic_Return',' list of supported CPU instruction sets'#010+
   '**2if_Return list of supported FPU instruction sets'#010+
-  '**2ii_Re','turn list of supported inline assembler modes'#010+
+  '**2ii_Return list of supported inline assembler modes'#010+
   '**2im_Return list of supported modeswitches'#010+
   '**2io_Return list of supported optimizations'#010+
-  '**2ir_Return list of recognized compiler and RTL features'#010+
+  '**2ir','_Return list of recognized compiler and RTL features'#010+
   '**2it_Return list of supported targets'#010+
-  '**2iu_Re','turn list of supported microcontroller types'#010+
+  '**2iu_Return list of supported microcontroller types'#010+
   '**2iw_Return list of supported whole program optimizations'#010+
   '**1I<x>_Add <x> to include path'#010+
-  '**1k<x>_Pass <x> to the linker'#010+
+  '**1k','<x>_Pass <x> to the linker'#010+
   '**1l_Write logo'#010+
-  '**1M<x>_Set language mode to <x> / enable modeswitch <x> ','(see option'+
-  ' -im)'#010+
+  '**1M<x>_Set language mode to <x> / enable modeswitch <x> (see option -'+
+  'im)'#010+
   '**2Mfpc_Free Pascal dialect (default)'#010+
   '**2Mobjfpc_FPC mode with Object Pascal support'#010+
-  '**2Mdelphi_Delphi 7 compatibility mode'#010+
+  '**2Mdelphi_Delphi 7 compatibility mode',#010+
   '**2Mtp_TP/BP 7.0 compatibility mode'#010+
   '**2Mmacpas_Macintosh Pascal dialects compatibility mode'#010+
-  '**2Miso','_ISO 7185 mode'#010+
+  '**2Miso_ISO 7185 mode'#010+
   '**2Mextendedpascal_ISO 10206 mode'#010+
   '**2Mdelphiunicode_Delphi 2009 and later compatibility mode'#010+
-  '**2*_Each mode (as listed above) enables its default set of modeswitch'+
-  'es.'#010+
-  '**2*_Other modeswitches are disabled and need to be enable','d one by a'+
-  'nother.'#010+
+  '**2*_Each mode (as listed above)',' enables its default set of modeswit'+
+  'ches.'#010+
+  '**2*_Other modeswitches are disabled and need to be enabled one by ano'+
+  'ther.'#010+
   '**1M<x>-_Disable modeswitch <x> (see option -im)'#010+
   '**1n_Do not read the default config files'#010+
-  '**1o<x>_Change the name of the executable produced to <x>'#010+
+  '**1o<x>_Change the name of the ','executable produced to <x>'#010+
   '**1O<x>_Optimizations:'#010+
   '**2O-_Disable optimizations'#010+
-  '**2O1_Level 1 optimiza','tions (quick and debugger friendly)'#010+
+  '**2O1_Level 1 optimizations (quick and debugger friendly)'#010+
   '**2O2_Level 2 optimizations (-O1 + quick optimizations)'#010+
-  '**2O3_Level 3 optimizations (-O2 + slow optimizations)'#010+
+  '**2O3_Level 3 optimizations (-O2 + slow optimiza','tions)'#010+
   '**2O4_Level 4 optimizations (-O3 + optimizations which might have unex'+
   'pected side effects)'#010+
-  '**','2Oa<x>=<y>_Set alignment'#010+
+  '**2Oa<x>=<y>_Set alignment'#010+
   '**2Oo[NO]<x>_Enable or disable optimizations; see fpc -i or fpc -io fo'+
   'r possible values'#010+
-  '**2Op<x>_Set target cpu for optimizing; see fpc -i or fpc -ic for poss'+
-  'ible values'#010+
-  '**2OW<x>_Generate whole-program optimization ','feedback for optimizati'+
-  'on <x>; see fpc -i or fpc -iw for possible values'#010+
-  '**2Ow<x>_Perform whole-program optimization <x>; see fpc -i or fpc -iw'+
-  ' for possible values'#010+
+  '**2Op<x>_Set target cpu for',' optimizing; see fpc -i or fpc -ic for po'+
+  'ssible values'#010+
+  '**2OW<x>_Generate whole-program optimization feedback for optimization'+
+  ' <x>; see fpc -i or fpc -iw for possible values'#010+
+  '**2Ow<x>_Perform whole-program optimization <x>; see fpc -i or fpc ','-'+
+  'iw for possible values'#010+
   '**2Os_Optimize for size rather than speed'#010+
-  '**1pg_Generate profile code for gp','rof (defines FPC_PROFILE)'#010+
+  '**1pg_Generate profile code for gprof (defines FPC_PROFILE)'#010+
   'F*1P<x>_Target CPU / compiler related options:'#010+
   'F*2PB_Show default compiler binary'#010+
   'F*2PP_Show default target cpu'#010+
-  'F*2P<x>_Set target CPU (aarch64,arm,avr,i386,i8086,jvm,m68k,mips,mipse'+
-  'l,powerpc,powerpc64,sparc,x86_64',')'#010+
+  'F*','2P<x>_Set target CPU (aarch64,arm,avr,i386,i8086,jvm,m68k,mips,mip'+
+  'sel,powerpc,powerpc64,sparc,x86_64)'#010+
   '**1R<x>_Assembler reading style:'#010+
   '**2Rdefault_Use default assembler for target'#010+
   '3*2Ratt_Read AT&T style assembler'#010+
-  '3*2Rintel_Read Intel style assembler'#010+
+  '3*2Rintel_Read Intel style',' assembler'#010+
   '4*2Ratt_Read AT&T style assembler'#010+
   '4*2Rintel_Read Intel style assembler'#010+
-  '8*2Ratt_Read AT&T ','style assembler'#010+
+  '8*2Ratt_Read AT&T style assembler'#010+
   '8*2Rintel_Read Intel style assembler'#010+
   '6*2RMOT_Read Motorola style assembler'#010+
   '**1S<x>_Syntax options:'#010+
   '**2S2_Same as -Mobjfpc'#010+
-  '**2Sc_Support operators like C (*=,+=,/= and -=)'#010+
+  '**','2Sc_Support operators like C (*=,+=,/= and -=)'#010+
   '**2Sa_Turn on assertions'#010+
   '**2Sd_Same as -Mdelphi'#010+
-  '**2Se','<x>_Error options. <x> is a combination of the following:'#010+
+  '**2Se<x>_Error options. <x> is a combination of the following:'#010+
   '**3*_<n> : Compiler halts after the <n> errors (default is 1)'#010+
-  '**3*_w : Compiler also halts after warnings'#010+
+  '**3*_w : Compiler al','so halts after warnings'#010+
   '**3*_n : Compiler also halts after notes'#010+
-  '**3*_h : Compiler also halts after ','hints'#010+
+  '**3*_h : Compiler also halts after hints'#010+
   '**2Sf_Enable certain features in compiler and RTL; see fpc -i or fpc -'+
   'ir for possible values)'#010+
-  '**2Sg_Enable LABEL and GOTO (default in -Mtp and -Mdelphi)'#010+
+  '**2Sg_Enable LABEL and GOTO (default in ','-Mtp and -Mdelphi)'#010+
   '**2Sh_Use reference counted strings (ansistring by default) instead of'+
-  ' shortstrin','gs'#010+
+  ' shortstrings'#010+
   '**2Si_Turn on inlining of procedures/functions declared as "inline"'#010+
   '**2Sj_Allows typed constants to be writeable (default in all modes)'#010+
-  '**2Sk_Load fpcylix unit'#010+
+  '*','*2Sk_Load fpcylix unit'#010+
   '**2SI<x>_Set interface style to <x>'#010+
-  '**3SIcom_COM compatible interface (defaul','t)'#010+
+  '**3SIcom_COM compatible interface (default)'#010+
   '**3SIcorba_CORBA compatible interface'#010+
   '**2Sm_Support macros like C (global)'#010+
   '**2So_Same as -Mtp'#010+
   '**2Sr_Transparent file names in ISO mode'#010+
-  '**2Ss_Constructor name must be init (destructor must be done)'#010+
-  '**2Sv_Support vector processing (use CPU',' vector extensions if availa'+
-  'ble)'#010+
+  '**','2Ss_Constructor name must be init (destructor must be done)'#010+
+  '**2Sv_Support vector processing (use CPU vector extensions if availabl'+
+  'e)'#010+
   '**2Sx_Enable exception keywords (default in Delphi/ObjFPC modes)'#010+
-  '**2Sy_@<pointer> returns a typed pointer, same as $T+'#010+
+  '**2Sy_@<pointer> returns a typed pointer, ','same as $T+'#010+
   '**1s_Do not call assembler and linker'#010+
   '**2sh_Generate script to link on host'#010+
-  '**2st_Genera','te script to link on target'#010+
+  '**2st_Generate script to link on target'#010+
   '**2sr_Skip register allocation phase (use with -alr)'#010+
   '**1T<x>_Target operating system:'#010+
   '3*2Tandroid_Android'#010+
-  '3*2Taros_AROS'#010+
+  '3*2Tar','os_AROS'#010+
   '3*2Tbeos_BeOS'#010+
   '3*2Tdarwin_Darwin/Mac OS X'#010+
   '3*2Tembedded_Embedded'#010+
-  '3*2Temx_OS/2 via EMX (includi','ng EMX/RSX extender)'#010+
+  '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+
   '3*2Tfreebsd_FreeBSD'#010+
   '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
   '3*2Thaiku_Haiku'#010+
-  '3*2Tiphonesim_iPhoneSimulator from iOS SDK 3.2+ (older versions: -Tdar'+
-  'win)'#010+
+  '3*2Tiphonesim_iPhoneSimulator from ','iOS SDK 3.2+ (older versions: -Td'+
+  'arwin)'#010+
   '3*2Tlinux_Linux'#010+
   '3*2Tnativent_Native NT API (experimental)'#010+
-  '3*','2Tnetbsd_NetBSD'#010+
+  '3*2Tnetbsd_NetBSD'#010+
   '3*2Tnetware_Novell Netware Module (clib)'#010+
   '3*2Tnetwlibc_Novell Netware Module (libc)'#010+
   '3*2Topenbsd_OpenBSD'#010+
-  '3*2Tos2_OS/2 / eComStation'#010+
+  '3*2Tos2_OS/2 / eComSt','ation'#010+
   '3*2Tsymbian_Symbian OS'#010+
   '3*2Tsolaris_Solaris'#010+
   '3*2Twatcom_Watcom compatible DOS extender'#010+
-  '3*2Twdosx','_WDOSX DOS extender'#010+
+  '3*2Twdosx_WDOSX DOS extender'#010+
   '3*2Twin32_Windows 32 Bit'#010+
   '3*2Twince_Windows CE'#010+
   '4*2Tandroid_Android'#010+
   '4*2Taros_AROS'#010+
   '4*2Tdarwin_Darwin/Mac OS X'#010+
-  '4*2Tdragonfly_DragonFly BSD'#010+
+  '4*2Tdragonfly','_DragonFly BSD'#010+
   '4*2Tembedded_Embedded'#010+
   '4*2Tfreebsd_FreeBSD'#010+
   '4*2Thaiku_Haiku'#010+
-  '4*2Tiphonesim_iPhoneSimulat','or'#010+
+  '4*2Tiphonesim_iPhoneSimulator'#010+
   '4*2Tlinux_Linux'#010+
   '4*2Tnetbsd_NetBSD'#010+
   '4*2Topenbsd_OpenBSD'#010+
   '4*2Tsolaris_Solaris'#010+
   '4*2Twin64_Win64 (64 bit Windows systems)'#010+
-  '6*2Tamiga_Commodore Amiga'#010+
+  '6*2Tamiga_Commodore Am','iga'#010+
   '6*2Tatari_Atari ST/STe/TT'#010+
   '6*2Tembedded_Embedded'#010+
   '6*2Tlinux_Linux'#010+
   '6*2Tnetbsd_NetBSD'#010+
-  '6*2Tmacosclass','ic_Classic Mac OS'#010+
+  '6*2Tmacosclassic_Classic Mac OS'#010+
   '6*2Tpalmos_PalmOS'#010+
   '8*2Tembedded_Embedded'#010+
   '8*2Tmsdos_MS-DOS (and compatible)'#010+
   '8*2Twin16_Windows 16 Bit'#010+
   'A*2Tandroid_Android'#010+
-  'A*2Taros_AROS'#010+
+  'A*2','Taros_AROS'#010+
   'A*2Tdarwin_Darwin/iPhoneOS/iOS'#010+
   'A*2Tembedded_Embedded'#010+
   'A*2Tfreertos_FreeRTOS'#010+
-  'A*2Tgba_Game B','oy Advance'#010+
+  'A*2Tgba_Game Boy Advance'#010+
   'A*2Tlinux_Linux'#010+
   'A*2Tnds_Nintendo DS'#010+
   'A*2Tnetbsd_NetBSD'#010+
   'A*2Tpalmos_PalmOS'#010+
   'A*2Tsymbian_Symbian'#010+
   'A*2Twince_Windows CE'#010+
-  'a*2Tandroid_Android'#010+
+  'a*2Tandroid_Andr','oid'#010+
   'a*2Tdarwin_Darwin/iOS'#010+
   'a*2Tlinux_Linux'#010+
   'a*2Twin64_Windows 64'#010+
   'J*2Tandroid_Android'#010+
   'J*2Tjava_Java'#010+
-  'm*2','Tandroid_Android'#010+
+  'm*2Tandroid_Android'#010+
   'm*2Tembedded_Embedded'#010+
   'm*2Tlinux_Linux'#010+
   'M*2Tembedded_Embedded'#010+
   'M*2Tlinux_Linux'#010+
   'P*2Taix_AIX'#010+
   'P*2Tamiga_AmigaOS'#010+
-  'P*2Tdarwin_Darwin/Mac OS X'#010+
+  'P*2Tdarwin_Darwin','/Mac OS X'#010+
   'P*2Tembedded_Embedded'#010+
   'P*2Tlinux_Linux'#010+
   'P*2Tmacosclassic_Classic Mac OS'#010+
-  'P*2Tmorphos_MorphOS'#010,
+  'P*2Tmorphos_MorphOS'#010+
   'P*2Tnetbsd_NetBSD'#010+
   'P*2Twii_Wii'#010+
   'p*2Taix_AIX'#010+
@@ -1831,166 +1836,165 @@ const msgtxt : array[0..000358,1..240] of char=(
   'p*2Tembedded_Embedded'#010+
   'p*2Tlinux_Linux'#010+
   'R*2Tlinux_Linux'#010+
-  'R*2Tembedded_Embedded'#010+
+  'R*2Tembedded_Embe','dded'#010+
   'r*2Tlinux_Linux'#010+
   'r*2Tembedded_Embedded'#010+
   'S*2Tlinux_Linux'#010+
   'S*2Tsolaris_Solaris'#010+
   's*2Tlinux_Linux'#010+
-  'V*2Te','mbedded_Embedded'#010+
+  'V*2Tembedded_Embedded'#010+
   'x*2Tembedded_Embedded'#010+
   'x*2Tfreertos_FreeRTOS'#010+
   'x*2Tlinux_Linux'#010+
   'Z*2Tembedded_Embedded'#010+
   'Z*2Tzxspectrum_ZX Spectrum'#010+
-  'Z*2Tmsxdos_MSX-DOS'#010+
+  'Z*2Tmsxdos_MSX','-DOS'#010+
   '**1u<x>_Undefines the symbol <x>'#010+
   '**1U_Unit options:'#010+
-  '**2Un_Do not check where the unit name matc','hes the file name'#010+
+  '**2Un_Do not check where the unit name matches the file name'#010+
   '**2Ur_Generate release unit files (never automatically recompiled)'#010+
   '**2Us_Compile a system unit'#010+
-  '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
-  '**2*_e : Show errors (default)       0 : Show nothing (excep','t errors'+
-  ')'#010+
+  '**1v<x>_Be verbose. <x> is ','a combination of the following letters:'#010+
+  '**2*_e : Show errors (default)       0 : Show nothing (except errors)'#010+
   '**2*_w : Show warnings               u : Show unit info'#010+
   '**2*_n : Show notes                  t : Show tried/used files'#010+
-  '**2*_h : Show hints                  c : Show conditionals'#010+
-  '**2*_i : Show general info           d : Show debug ','info'#010+
+  '**2*_h : Sh','ow hints                  c : Show conditionals'#010+
+  '**2*_i : Show general info           d : Show debug info'#010+
   '**2*_l : Show linenumbers            r : Rhide/GCC compatibility mode'#010+
   '**2*_s : Show time stamps            q : Show message numbers'#010+
-  '**2*_a : Show everything             x : Show info about invoked tools'+
-  #010+
-  '**2*_b : Write file names messag','es   p : Write tree.log with parse t'+
-  'ree'#010+
+  '**2','*_a : Show everything             x : Show info about invoked too'+
+  'ls'#010+
+  '**2*_b : Write file names messages   p : Write tree.log with parse tre'+
+  'e'#010+
   '**2*_    with full path              v : Write fpcdebug.txt with'#010+
-  '**2*_z : Write output to stderr          lots of debugging info'#010+
+  '**2*_z : Write output to stderr    ','      lots of debugging info'#010+
   '**2*_m<x>,<y> : Do not show messages numbered <x> and <y>'#010+
-  'F*1V<x>_Appen','d '#039'-<x>'#039' to the used compiler binary name (e.g.'+
-  ' for version)'#010+
+  'F*1V<x>_Append '#039'-<x>'#039' to the used compiler binary name (e.g. f'+
+  'or version)'#010+
   '**1W<x>_Target-specific options (targets)'#010+
-  '3*2WA_Specify native type application (Windows)'#010+
+  '3*2WA_Specify native type application',' (Windows)'#010+
   '4*2WA_Specify native type application (Windows)'#010+
-  'A*2WA_Specify native type application (Wi','ndows)'#010+
+  'A*2WA_Specify native type application (Windows)'#010+
   '3*2Wb_Create a bundle instead of a library (Darwin)'#010+
   'P*2Wb_Create a bundle instead of a library (Darwin)'#010+
-  'p*2Wb_Create a bundle instead of a library (Darwin)'#010+
+  'p*2Wb_Create a bundle instead',' of a library (Darwin)'#010+
   'a*2Wb_Create a bundle instead of a library (Darwin)'#010+
-  'A*2Wb_Create a bundle ins','tead of a library (Darwin)'#010+
+  'A*2Wb_Create a bundle instead of a library (Darwin)'#010+
   '4*2Wb_Create a bundle instead of a library (Darwin)'#010+
   '3*2WB_Create a relocatable image (Windows, Symbian)'#010+
-  '3*2WB<x>_Set image base to <x> (Windows, Symbian)'#010+
+  '3*2WB<x>_','Set image base to <x> (Windows, Symbian)'#010+
   '4*2WB_Create a relocatable image (Windows)'#010+
-  '4*2WB<x>_Set ima','ge base to <x> (Windows)'#010+
+  '4*2WB<x>_Set image base to <x> (Windows)'#010+
   'A*2WB_Create a relocatable image (Windows, Symbian)'#010+
   'A*2WB<x>_Set image base to <x> (Windows, Symbian)'#010+
-  'Z*2WB<x>_Set image base to <x> (ZX Spectrum)'#010+
+  'Z*2WB<x>_Set ','image base to <x> (ZX Spectrum)'#010+
   '3*2WC_Specify console type application (EMX, OS/2, Windows)'#010+
-  '4*2WC_Sp','ecify console type application (Windows)'#010+
+  '4*2WC_Specify console type application (Windows)'#010+
   'A*2WC_Specify console type application (Windows)'#010+
-  'P*2WC_Specify console type application (Classic Mac OS)'#010+
+  'P*2WC_Specify console type application (Classic Ma','c OS)'#010+
   '3*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
-  '4*2WD_Use DEFFILE to export func','tions of DLL or EXE (Windows)'#010+
+  '4*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
   'A*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
   '3*2We_Use external resources (Darwin)'#010+
-  '4*2We_Use external resources (Darwin)'#010+
+  '4*2We_Use ','external resources (Darwin)'#010+
   'a*2We_Use external resources (Darwin)'#010+
-  'A*2We_Use external resources (Darw','in)'#010+
+  'A*2We_Use external resources (Darwin)'#010+
   'P*2We_Use external resources (Darwin)'#010+
   'p*2We_Use external resources (Darwin)'#010+
   '3*2WF_Specify full-screen type application (EMX, OS/2)'#010+
-  '3*2WG_Specify graphic type application (EMX, OS/2, Windows)'#010+
-  '4*2WG_Specify graphic type application (Windo','ws)'#010+
+  '3*2WG','_Specify graphic type application (EMX, OS/2, Windows)'#010+
+  '4*2WG_Specify graphic type application (Windows)'#010+
   'A*2WG_Specify graphic type application (Windows)'#010+
   'P*2WG_Specify graphic type application (Classic Mac OS)'#010+
-  '3*2Wi_Use internal resources (Darwin)'#010+
+  '3*2Wi_Use internal resources (D','arwin)'#010+
   '4*2Wi_Use internal resources (Darwin)'#010+
   'a*2Wi_Use internal resources (Darwin)'#010+
-  'A*2Wi_Use interna','l resources (Darwin)'#010+
+  'A*2Wi_Use internal resources (Darwin)'#010+
   'P*2Wi_Use internal resources (Darwin)'#010+
   'p*2Wi_Use internal resources (Darwin)'#010+
-  '3*2WI_Turn on/off the usage of import sections (Windows)'#010+
+  '3*2WI_Turn on/off the usage of import secti','ons (Windows)'#010+
   '4*2WI_Turn on/off the usage of import sections (Windows)'#010+
-  'A*2WI_Turn on/off the usage o','f import sections (Windows)'#010+
+  'A*2WI_Turn on/off the usage of import sections (Windows)'#010+
   '8*2Wh_Use huge code for units (ignored for models with CODE in a uniqu'+
   'e segment)'#010+
   '8*2Wm<x>_Set memory model'#010+
-  '8*3WmTiny_Tiny memory model'#010+
+  '8*3Wm','Tiny_Tiny memory model'#010+
   '8*3WmSmall_Small memory model (default)'#010+
   '8*3WmMedium_Medium memory model'#010+
-  '8*3Wm','Compact_Compact memory model'#010+
+  '8*3WmCompact_Compact memory model'#010+
   '8*3WmLarge_Large memory model'#010+
   '8*3WmHuge_Huge memory model'#010+
-  '3*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
-  'n)'#010+
+  '3*2WM<x>_Minimum Mac OS X deployment version: 10.4, 1','0.5.1, ... (Dar'+
+  'win)'#010+
   '4*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
   'n)'#010+
-  'p*2WM<x','>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Dar'+
-  'win)'#010+
+  'p*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
+  'n)'#010+
   'P*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
   'n)'#010+
-  '3*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
-  '4*2WN_Do not generate relocatio','n code, needed for debugging (Windows'+
+  '3','*2WN_Do not generate relocation code, needed for debugging (Windows'+
   ')'#010+
+  '4*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
   'A*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
-  'A*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
-  'le values'#010+
-  'm*2Wp<x>_Specify the controller type; see fpc -i or',' fpc -iu for poss'+
+  'A*2Wp<x>_Specify the controller',' type; see fpc -i or fpc -iu for poss'+
   'ible values'#010+
-  'R*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
+  'm*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
   'le values'#010+
-  'V*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
+  'R*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
   'le values'#010+
-  'x*2Wp<x>_Specify the controller type; see fpc -i or',' fpc -iu for poss'+
+  'V*2Wp<x>_Specify the controller',' type; see fpc -i or fpc -iu for poss'+
   'ible values'#010+
+  'x*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
+  'le values'#010+
   '3*2WP<x>_Minimum iOS deployment version: 3.0, 5.0.1, ... (iphonesim)'#010+
-  '4*2WP<x>_Minimum iOS deployment version: 8.0, 8.0.2, ... (iphonesim)'#010+
+  '4*2WP<x>_Minimum iOS deployment version: 8','.0, 8.0.2, ... (iphonesim)'+
+  #010+
   'a*2WP<x>_Minimum iOS deployment version: 7.0, 7.1.2, ... (Darwin)'#010+
-  'A*2WP<x','>_Minimum iOS deployment version: 3.0, 5.0.1, ... (Darwin)'#010+
+  'A*2WP<x>_Minimum iOS deployment version: 3.0, 5.0.1, ... (Darwin)'#010+
   '3*2WR_Generate relocation code (Windows)'#010+
-  '4*2WR_Generate relocation code (Windows)'#010+
+  '4*2WR_Generate relocation code (Windows)',#010+
   'A*2WR_Generate relocation code (Windows)'#010+
   '8*2Wt<x>_Set the target executable format'#010+
-  '8*3Wtexe_Create ','a DOS .EXE file (default)'#010+
+  '8*3Wtexe_Create a DOS .EXE file (default)'#010+
   '8*3Wtcom_Create a DOS .COM file (requires tiny memory model)'#010+
-  'P*2WT_Specify MPW tool type application (Classic Mac OS)'#010+
+  'P*2WT_Specify MPW tool type application (Classic Mac ','OS)'#010+
   '**2WX_Enable executable stack (Linux)'#010+
   '**1X_Executable options:'#010+
-  '**2X9_Generate linkerscript for G','NU Binutils ld older than version 2'+
-  '.19.1 (Linux)'#010+
+  '**2X9_Generate linkerscript for GNU Binutils ld older than version 2.1'+
+  '9.1 (Linux)'#010+
   '**2Xc_Pass --shared/-dynamic to the linker (BeOS, Darwin, FreeBSD, Lin'+
   'ux)'#010+
-  '**2Xd_Do not search default library path (sometimes required for cross'+
-  '-compiling when not using -XR)'#010+
-  '**2Xe_Use extern','al linker'#010+
+  '**2Xd_Do not sear','ch default library path (sometimes required for cro'+
+  'ss-compiling when not using -XR)'#010+
+  '**2Xe_Use external linker'#010+
   '**2Xf_Substitute pthread library name for linking (BSD)'#010+
   '**2Xg_Create debuginfo in a separate file and add a debuglink section '+
-  'to executable'#010+
+  'to e','xecutable'#010+
   '**2XD_Try to link units dynamically      (defines FPC_LINK_DYNAMIC)'#010+
-  '**2Xi_Use internal lin','ker'#010+
+  '**2Xi_Use internal linker'#010+
   'L*2XlS<x>_LLVM utilties suffix (e.g. -7 in case clang is called clang-'+
   '7)'#010+
   '**2XLA_Define library substitutions for linking'#010+
-  '**2XLO_Define order of library linking'#010+
+  '**2XLO_Define o','rder of library linking'#010+
   '**2XLD_Exclude default order of standard libraries'#010+
   '**2Xm_Generate link map'#010+
-  '*','*2XM<x>_Set the name of the '#039'main'#039' program routine (default'+
-  ' is '#039'main'#039')'#010+
-  '**2Xn_Use target system native linker instead of GNU ld (Solaris, AIX)'+
-  #010+
+  '**2XM<x>_Set the name of the '#039'main'#039' program routine (default i'+
+  's '#039'main'#039')'#010+
+  '**2Xn_Use target system native linker instead of GNU ld (Solaris, AIX',
+  ')'#010+
   'F*2Xp<x>_First search for the compiler binary in the directory <x>'#010+
-  '**2XP<x>_Prepend the binutils n','ames with the prefix <x>'#010+
+  '**2XP<x>_Prepend the binutils names with the prefix <x>'#010+
   '**2Xr<x>_Set the linker'#039's rlink-path to <x> (needed for cross comp'+
-  'ile, see the ld manual for more information) (BeOS, Linux)'#010+
+  'ile, see the ld manual for more information) (BeO','S, Linux)'#010+
   '**2XR<x>_Prepend <x> to all linker search paths (BeOS, Darwin, FreeBSD'+
-  ', Linux, Mac OS, Sol','aris)'#010+
+  ', Linux, Mac OS, Solaris)'#010+
   '**2Xs_Strip all symbols from executable'#010+
   '**2XS_Try to link units statically (default, defines FPC_LINK_STATIC)'#010+
-  '**2Xt_Link with static libraries (-static is passed to linker)'#010+
+  '**2Xt_Link with static l','ibraries (-static is passed to linker)'#010+
   '**2Xv_Generate table for Virtual Entry calls'#010+
-  '**2XV_Use VLink ','as external linker       (default on Amiga, MorphOS)'+
-  #010+
+  '**2XV_Use VLink as external linker       (default on Amiga, MorphOS)'#010+
   '**2XX_Try to smartlink units             (defines FPC_LINK_SMART)'#010+
   '**1*_'#010+
-  '**1?_Show this help'#010+
+  '**1?_Show this ','help'#010+
   '**1h_Shows this help without waiting'
 );