coremqtt-winsim: Remove duplicate copy of WinPCap

19 files changed, 0 insertions, 3505 deletions

diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/Packet32.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/Packet32.h
deleted file mode 100644
index 64be055d9..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/Packet32.h
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Copyright (c) 1999 - 2005 NetGroup, Politecnico di Torino (Italy)
- * Copyright (c) 2005 - 2007 CACE Technologies, Davis (California)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Politecnico di Torino, CACE Technologies 
- * nor the names of its contributors may be used to endorse or promote 
- * products derived from this software without specific prior written 
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-/** @ingroup packetapi
- *  @{ 
- */
-
-/** @defgroup packet32h Packet.dll definitions and data structures
- *  Packet32.h contains the data structures and the definitions used by packet.dll.
- *  The file is used both by the Win9x and the WinNTx versions of packet.dll, and can be included
- *  by the applications that use the functions of this library
- *  @{
- */
-
-#ifndef __PACKET32
-#define __PACKET32
-
-#include <winsock2.h>
-
-#ifdef HAVE_AIRPCAP_API
-#include <airpcap.h>
-#else
-#if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_)
-#define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_
-typedef struct _AirpcapHandle *PAirpcapHandle;
-#endif /* AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ */
-#endif /* HAVE_AIRPCAP_API */
-
-#ifdef HAVE_DAG_API
-#include <dagc.h>
-#endif /* HAVE_DAG_API */
-
-// Working modes
-#define PACKET_MODE_CAPT 0x0 ///< Capture mode
-#define PACKET_MODE_STAT 0x1 ///< Statistical mode
-#define PACKET_MODE_MON 0x2 ///< Monitoring mode
-#define PACKET_MODE_DUMP 0x10 ///< Dump mode
-#define PACKET_MODE_STAT_DUMP MODE_DUMP | MODE_STAT ///< Statistical dump Mode
-
-
-/// Alignment macro. Defines the alignment size.
-#define Packet_ALIGNMENT sizeof(int)
-/// Alignment macro. Rounds up to the next even multiple of Packet_ALIGNMENT. 
-#define Packet_WORDALIGN(x) (((x)+(Packet_ALIGNMENT-1))&~(Packet_ALIGNMENT-1))
-
-#define NdisMediumNull	-1		///< Custom linktype: NDIS doesn't provide an equivalent
-#define NdisMediumCHDLC	-2		///< Custom linktype: NDIS doesn't provide an equivalent
-#define NdisMediumPPPSerial	-3	///< Custom linktype: NDIS doesn't provide an equivalent
-#define NdisMediumBare80211	-4	///< Custom linktype: NDIS doesn't provide an equivalent
-#define NdisMediumRadio80211	-5	///< Custom linktype: NDIS doesn't provide an equivalent
-#define NdisMediumPpi		-6	///< Custom linktype: NDIS doesn't provide an equivalent
-
-// Loopback behaviour definitions
-#define NPF_DISABLE_LOOPBACK	1	///< Drop the packets sent by the NPF driver
-#define NPF_ENABLE_LOOPBACK		2	///< Capture the packets sent by the NPF driver
-
-/*!
-  \brief Network type structure.
-
-  This structure is used by the PacketGetNetType() function to return information on the current adapter's type and speed.
-*/
-typedef struct NetType
-{
-	UINT LinkType;	///< The MAC of the current network adapter (see function PacketGetNetType() for more information)
-	ULONGLONG LinkSpeed;	///< The speed of the network in bits per second
-}NetType;
-
-
-//some definitions stolen from libpcap
-
-#ifndef BPF_MAJOR_VERSION
-
-/*!
-  \brief A BPF pseudo-assembly program.
-
-  The program will be injected in the kernel by the PacketSetBPF() function and applied to every incoming packet. 
-*/
-struct bpf_program 
-{
-	UINT bf_len;				///< Indicates the number of instructions of the program, i.e. the number of struct bpf_insn that will follow.
-	struct bpf_insn *bf_insns;	///< A pointer to the first instruction of the program.
-};
-
-/*!
-  \brief A single BPF pseudo-instruction.
-
-  bpf_insn contains a single instruction for the BPF register-machine. It is used to send a filter program to the driver.
-*/
-struct bpf_insn 
-{
-	USHORT	code;		///< Instruction type and addressing mode.
-	UCHAR 	jt;			///< Jump if true
-	UCHAR 	jf;			///< Jump if false
-	int k;				///< Generic field used for various purposes.
-};
-
-/*!
-  \brief Structure that contains a couple of statistics values on the current capture.
-
-  It is used by packet.dll to return statistics about a capture session.
-*/
-struct bpf_stat 
-{
-	UINT bs_recv;		///< Number of packets that the driver received from the network adapter 
-						///< from the beginning of the current capture. This value includes the packets 
-						///< lost by the driver.
-	UINT bs_drop;		///< number of packets that the driver lost from the beginning of a capture. 
-						///< Basically, a packet is lost when the the buffer of the driver is full. 
-						///< In this situation the packet cannot be stored and the driver rejects it.
-	UINT ps_ifdrop;		///< drops by interface. XXX not yet supported
-	UINT bs_capt;		///< number of packets that pass the filter, find place in the kernel buffer and
-						///< thus reach the application.
-};
-
-/*!
-  \brief Packet header.
-
-  This structure defines the header associated with every packet delivered to the application.
-*/
-struct bpf_hdr 
-{
-	struct timeval	bh_tstamp;	///< The timestamp associated with the captured packet. 
-								///< It is stored in a TimeVal structure.
-	UINT	bh_caplen;			///< Length of captured portion. The captured portion <b>can be different</b>
-								///< from the original packet, because it is possible (with a proper filter)
-								///< to instruct the driver to capture only a portion of the packets.
-	UINT	bh_datalen;			///< Original length of packet
-	USHORT		bh_hdrlen;		///< Length of bpf header (this struct plus alignment padding). In some cases,
-								///< a padding could be added between the end of this structure and the packet
-								///< data for performance reasons. This filed can be used to retrieve the actual data 
-								///< of the packet.
-};
-
-/*!
-  \brief Dump packet header.
-
-  This structure defines the header associated with the packets in a buffer to be used with PacketSendPackets().
-  It is simpler than the bpf_hdr, because it corresponds to the header associated by WinPcap and libpcap to a
-  packet in a dump file. This makes straightforward sending WinPcap dump files to the network.
-*/
-struct dump_bpf_hdr{
-    struct timeval	ts;			///< Time stamp of the packet
-    UINT			caplen;		///< Length of captured portion. The captured portion can smaller than the 
-								///< the original packet, because it is possible (with a proper filter) to 
-								///< instruct the driver to capture only a portion of the packets. 
-    UINT			len;		///< Length of the original packet (off wire).
-};
-
-
-#endif
-
-struct bpf_stat;
-
-#define        DOSNAMEPREFIX   TEXT("Packet_")	///< Prefix added to the adapters device names to create the WinPcap devices
-#define        MAX_LINK_NAME_LENGTH	64			//< Maximum length of the devices symbolic links
-#define        NMAX_PACKET 65535
-
-/*!
-  \brief Addresses of a network adapter.
-
-  This structure is used by the PacketGetNetInfoEx() function to return the IP addresses associated with 
-  an adapter.
-*/
-typedef struct npf_if_addr {
-	struct sockaddr_storage IPAddress;	///< IP address.
-	struct sockaddr_storage SubnetMask;	///< Netmask for that address.
-	struct sockaddr_storage Broadcast;	///< Broadcast address.
-}npf_if_addr;
-
-
-#define ADAPTER_NAME_LENGTH 256 + 12	///<  Maximum length for the name of an adapter. The value is the same used by the IP Helper API.
-#define ADAPTER_DESC_LENGTH 128			///<  Maximum length for the description of an adapter. The value is the same used by the IP Helper API.
-#define MAX_MAC_ADDR_LENGTH 8			///<  Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API.
-#define MAX_NETWORK_ADDRESSES 16		///<  Maximum length for the link layer address of an adapter. The value is the same used by the IP Helper API.
-
-
-typedef struct WAN_ADAPTER_INT WAN_ADAPTER; ///< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API
-typedef WAN_ADAPTER *PWAN_ADAPTER; ///< Describes an opened wan (dialup, VPN...) network adapter using the NetMon API
-
-#define INFO_FLAG_NDIS_ADAPTER		0	///< Flag for ADAPTER_INFO: this is a traditional ndis adapter
-#define INFO_FLAG_NDISWAN_ADAPTER	1	///< Flag for ADAPTER_INFO: this is a NdisWan adapter, and it's managed by WANPACKET
-#define INFO_FLAG_DAG_CARD			2	///< Flag for ADAPTER_INFO: this is a DAG card
-#define INFO_FLAG_DAG_FILE			6	///< Flag for ADAPTER_INFO: this is a DAG file
-#define INFO_FLAG_DONT_EXPORT		8	///< Flag for ADAPTER_INFO: when this flag is set, the adapter will not be listed or openend by winpcap. This allows to prevent exporting broken network adapters, like for example FireWire ones.
-#define INFO_FLAG_AIRPCAP_CARD		16	///< Flag for ADAPTER_INFO: this is an airpcap card
-#define INFO_FLAG_NPFIM_DEVICE		32
-
-/*!
-  \brief Describes an opened network adapter.
-
-  This structure is the most important for the functioning of packet.dll, but the great part of its fields
-  should be ignored by the user, since the library offers functions that avoid to cope with low-level parameters
-*/
-typedef struct _ADAPTER  { 
-	HANDLE hFile;				///< \internal Handle to an open instance of the NPF driver.
-	CHAR  SymbolicLink[MAX_LINK_NAME_LENGTH]; ///< \internal A string containing the name of the network adapter currently opened.
-	int NumWrites;				///< \internal Number of times a packets written on this adapter will be repeated 
-								///< on the wire.
-	HANDLE ReadEvent;			///< A notification event associated with the read calls on the adapter.
-								///< It can be passed to standard Win32 functions (like WaitForSingleObject
-								///< or WaitForMultipleObjects) to wait until the driver's buffer contains some 
-								///< data. It is particularly useful in GUI applications that need to wait 
-								///< concurrently on several events. In Windows NT/2000 the PacketSetMinToCopy()
-								///< function can be used to define the minimum amount of data in the kernel buffer
-								///< that will cause the event to be signalled. 
-	
-	UINT ReadTimeOut;			///< \internal The amount of time after which a read on the driver will be released and 
-								///< ReadEvent will be signaled, also if no packets were captured
-	CHAR Name[ADAPTER_NAME_LENGTH];
-	PWAN_ADAPTER pWanAdapter;
-	UINT Flags;					///< Adapter's flags. Tell if this adapter must be treated in a different way, using the Netmon API or the dagc API.
-
-#ifdef HAVE_AIRPCAP_API
-	PAirpcapHandle	AirpcapAd;
-#endif // HAVE_AIRPCAP_API
-
-#ifdef HAVE_NPFIM_API
-	void* NpfImHandle;
-#endif // HAVE_NPFIM_API
-
-#ifdef HAVE_DAG_API
-	dagc_t *pDagCard;			///< Pointer to the dagc API adapter descriptor for this adapter
-	PCHAR DagBuffer;			///< Pointer to the buffer with the packets that is received from the DAG card
-	struct timeval DagReadTimeout;	///< Read timeout. The dagc API requires a timeval structure
-	unsigned DagFcsLen;			///< Length of the frame check sequence attached to any packet by the card. Obtained from the registry
-	DWORD DagFastProcess;		///< True if the user requests fast capture processing on this card. Higher level applications can use this value to provide a faster but possibly unprecise capture (for example, libpcap doesn't convert the timestamps).
-#endif // HAVE_DAG_API
-}  ADAPTER, *LPADAPTER;
-
-/*!
-  \brief Structure that contains a group of packets coming from the driver.
-
-  This structure defines the header associated with every packet delivered to the application.
-*/
-typedef struct _PACKET {  
-	HANDLE       hEvent;		///< \deprecated Still present for compatibility with old applications.
-	OVERLAPPED   OverLapped;	///< \deprecated Still present for compatibility with old applications.
-	PVOID        Buffer;		///< Buffer with containing the packets. See the PacketReceivePacket() for
-								///< details about the organization of the data in this buffer
-	UINT         Length;		///< Length of the buffer
-	DWORD        ulBytesReceived;	///< Number of valid bytes present in the buffer, i.e. amount of data
-									///< received by the last call to PacketReceivePacket()
-	BOOLEAN      bIoComplete;	///< \deprecated Still present for compatibility with old applications.
-}  PACKET, *LPPACKET;
-
-/*!
-  \brief Structure containing an OID request.
-
-  It is used by the PacketRequest() function to send an OID to the interface card driver. 
-  It can be used, for example, to retrieve the status of the error counters on the adapter, its MAC address, 
-  the list of the multicast groups defined on it, and so on.
-*/
-struct _PACKET_OID_DATA {
-    ULONG Oid;					///< OID code. See the Microsoft DDK documentation or the file ntddndis.h
-								///< for a complete list of valid codes.
-    ULONG Length;				///< Length of the data field
-    UCHAR Data[1];				///< variable-lenght field that contains the information passed to or received 
-								///< from the adapter.
-}; 
-typedef struct _PACKET_OID_DATA PACKET_OID_DATA, *PPACKET_OID_DATA;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- *  @}
- */
-
-/*
-BOOLEAN QueryWinPcapRegistryStringA(CHAR *SubKeyName,
-								 CHAR *Value,
-								 UINT *pValueLen,
-								 CHAR *DefaultVal);
-
-BOOLEAN QueryWinPcapRegistryStringW(WCHAR *SubKeyName,
-								 WCHAR *Value,
-								 UINT *pValueLen,
-								 WCHAR *DefaultVal);
-*/
-								 
-//---------------------------------------------------------------------------
-// EXPORTED FUNCTIONS
-//---------------------------------------------------------------------------
-
-PCHAR PacketGetVersion();
-PCHAR PacketGetDriverVersion();
-BOOLEAN PacketSetMinToCopy(LPADAPTER AdapterObject,int nbytes);
-BOOLEAN PacketSetNumWrites(LPADAPTER AdapterObject,int nwrites);
-BOOLEAN PacketSetMode(LPADAPTER AdapterObject,int mode);
-BOOLEAN PacketSetReadTimeout(LPADAPTER AdapterObject,int timeout);
-BOOLEAN PacketSetBpf(LPADAPTER AdapterObject,struct bpf_program *fp);
-BOOLEAN PacketSetLoopbackBehavior(LPADAPTER  AdapterObject, UINT LoopbackBehavior);
-INT PacketSetSnapLen(LPADAPTER AdapterObject,int snaplen);
-BOOLEAN PacketGetStats(LPADAPTER AdapterObject,struct bpf_stat *s);
-BOOLEAN PacketGetStatsEx(LPADAPTER AdapterObject,struct bpf_stat *s);
-BOOLEAN PacketSetBuff(LPADAPTER AdapterObject,int dim);
-BOOLEAN PacketGetNetType (LPADAPTER AdapterObject,NetType *type);
-LPADAPTER PacketOpenAdapter(PCHAR AdapterName);
-BOOLEAN PacketSendPacket(LPADAPTER AdapterObject,LPPACKET pPacket,BOOLEAN Sync);
-INT PacketSendPackets(LPADAPTER AdapterObject,PVOID PacketBuff,ULONG Size, BOOLEAN Sync);
-LPPACKET PacketAllocatePacket(void);
-VOID PacketInitPacket(LPPACKET lpPacket,PVOID  Buffer,UINT  Length);
-VOID PacketFreePacket(LPPACKET lpPacket);
-BOOLEAN PacketReceivePacket(LPADAPTER AdapterObject,LPPACKET lpPacket,BOOLEAN Sync);
-BOOLEAN PacketSetHwFilter(LPADAPTER AdapterObject,ULONG Filter);
-BOOLEAN PacketGetAdapterNames(PTSTR pStr,PULONG  BufferSize);
-BOOLEAN PacketGetNetInfoEx(PCHAR AdapterName, npf_if_addr* buffer, PLONG NEntries);
-BOOLEAN PacketRequest(LPADAPTER  AdapterObject,BOOLEAN Set,PPACKET_OID_DATA  OidData);
-HANDLE PacketGetReadEvent(LPADAPTER AdapterObject);
-BOOLEAN PacketSetDumpName(LPADAPTER AdapterObject, void *name, int len);
-BOOLEAN PacketSetDumpLimits(LPADAPTER AdapterObject, UINT maxfilesize, UINT maxnpacks);
-BOOLEAN PacketIsDumpEnded(LPADAPTER AdapterObject, BOOLEAN sync);
-BOOL PacketStopDriver();
-VOID PacketCloseAdapter(LPADAPTER lpAdapter);
-BOOLEAN PacketStartOem(PCHAR errorString, UINT errorStringLength);
-BOOLEAN PacketStartOemEx(PCHAR errorString, UINT errorStringLength, ULONG flags);
-PAirpcapHandle PacketGetAirPcapHandle(LPADAPTER AdapterObject);
-
-//
-// Used by PacketStartOemEx
-//
-#define PACKET_START_OEM_NO_NETMON	0x00000001
-
-#ifdef __cplusplus
-}
-#endif 
-
-#endif //__PACKET32
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/PacketData.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/PacketData.h
deleted file mode 100644
index b1f166f3f..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/PacketData.h
+++ /dev/null
@@ -1,267 +0,0 @@
-char pkt1[] = {
-0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14,
-0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x30, 0x09, 0x9c, 0x40, 0x00, 0x80, 0x06,
-0x6f, 0x07, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8,
-0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7,
-0xc7, 0x35, 0x00, 0x00, 0x00, 0x00, 0x70, 0x02,
-0x40, 0x00, 0xdf, 0xab, 0x00, 0x00, 0x02, 0x04,
-0x05, 0xb4, 0x01, 0x01, 0x04, 0x02 };
-
-char pkt2[] = {
-0x00, 0x14, 0x22, 0xcb, 0x18, 0x2d, 0x00, 0x01,
-0x02, 0x45, 0x09, 0x11, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x2c, 0x00, 0x01, 0x00, 0x00, 0x40, 0x06,
-0xf8, 0xa6, 0xc0, 0xa8, 0x00, 0x0c, 0xc0, 0xa8,
-0x00, 0xc8, 0x00, 0x50, 0x0f, 0xe2, 0x00, 0x00,
-0x06, 0x68, 0x09, 0xe7, 0xc7, 0x36, 0x60, 0x12,
-0x05, 0x92, 0x28, 0xca, 0x00, 0x00, 0x02, 0x04,
-0x05, 0x92 };
-
-char pkt3[] = {
-0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14,
-0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x28, 0x09, 0x9e, 0x40, 0x00, 0x80, 0x06,
-0x6f, 0x0d, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8,
-0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7,
-0xc7, 0x36, 0x00, 0x00, 0x06, 0x69, 0x50, 0x10,
-0x42, 0xd8, 0x82, 0x3f, 0x00, 0x00 };
-
-char pkt4[] = {
-0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14,
-0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00,
-0x02, 0x27, 0x09, 0x9f, 0x40, 0x00, 0x80, 0x06,
-0x6d, 0x0d, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8,
-0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7,
-0xc7, 0x36, 0x00, 0x00, 0x06, 0x69, 0x50, 0x18,
-0x42, 0xd8, 0x84, 0x3e, 0x00, 0x00, 0x47, 0x45,
-0x54, 0x20, 0x2f, 0x20, 0x48, 0x54, 0x54, 0x50,
-0x2f, 0x31, 0x2e, 0x31, 0x0d, 0x0a, 0x41, 0x63,
-0x63, 0x65, 0x70, 0x74, 0x3a, 0x20, 0x69, 0x6d,
-0x61, 0x67, 0x65, 0x2f, 0x67, 0x69, 0x66, 0x2c,
-0x20, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x2f, 0x78,
-0x2d, 0x78, 0x62, 0x69, 0x74, 0x6d, 0x61, 0x70,
-0x2c, 0x20, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x2f,
-0x6a, 0x70, 0x65, 0x67, 0x2c, 0x20, 0x69, 0x6d,
-0x61, 0x67, 0x65, 0x2f, 0x70, 0x6a, 0x70, 0x65,
-0x67, 0x2c, 0x20, 0x61, 0x70, 0x70, 0x6c, 0x69,
-0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x2f, 0x76,
-0x6e, 0x64, 0x2e, 0x6d, 0x73, 0x2d, 0x65, 0x78,
-0x63, 0x65, 0x6c, 0x2c, 0x20, 0x61, 0x70, 0x70,
-0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e,
-0x2f, 0x6d, 0x73, 0x77, 0x6f, 0x72, 0x64, 0x2c,
-0x20, 0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61,
-0x74, 0x69, 0x6f, 0x6e, 0x2f, 0x76, 0x6e, 0x64,
-0x2e, 0x6d, 0x73, 0x2d, 0x70, 0x6f, 0x77, 0x65,
-0x72, 0x70, 0x6f, 0x69, 0x6e, 0x74, 0x2c, 0x20,
-0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, 0x74,
-0x69, 0x6f, 0x6e, 0x2f, 0x78, 0x2d, 0x6d, 0x73,
-0x2d, 0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61,
-0x74, 0x69, 0x6f, 0x6e, 0x2c, 0x20, 0x61, 0x70,
-0x70, 0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f,
-0x6e, 0x2f, 0x78, 0x2d, 0x6d, 0x73, 0x2d, 0x78,
-0x62, 0x61, 0x70, 0x2c, 0x20, 0x61, 0x70, 0x70,
-0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e,
-0x2f, 0x76, 0x6e, 0x64, 0x2e, 0x6d, 0x73, 0x2d,
-0x78, 0x70, 0x73, 0x64, 0x6f, 0x63, 0x75, 0x6d,
-0x65, 0x6e, 0x74, 0x2c, 0x20, 0x61, 0x70, 0x70,
-0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e,
-0x2f, 0x78, 0x61, 0x6d, 0x6c, 0x2b, 0x78, 0x6d,
-0x6c, 0x2c, 0x20, 0x2a, 0x2f, 0x2a, 0x0d, 0x0a,
-0x41, 0x63, 0x63, 0x65, 0x70, 0x74, 0x2d, 0x4c,
-0x61, 0x6e, 0x67, 0x75, 0x61, 0x67, 0x65, 0x3a,
-0x20, 0x65, 0x6e, 0x2d, 0x67, 0x62, 0x0d, 0x0a,
-0x41, 0x63, 0x63, 0x65, 0x70, 0x74, 0x2d, 0x45,
-0x6e, 0x63, 0x6f, 0x64, 0x69, 0x6e, 0x67, 0x3a,
-0x20, 0x67, 0x7a, 0x69, 0x70, 0x2c, 0x20, 0x64,
-0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x0d, 0x0a,
-0x55, 0x73, 0x65, 0x72, 0x2d, 0x41, 0x67, 0x65,
-0x6e, 0x74, 0x3a, 0x20, 0x4d, 0x6f, 0x7a, 0x69,
-0x6c, 0x6c, 0x61, 0x2f, 0x34, 0x2e, 0x30, 0x20,
-0x28, 0x63, 0x6f, 0x6d, 0x70, 0x61, 0x74, 0x69,
-0x62, 0x6c, 0x65, 0x3b, 0x20, 0x4d, 0x53, 0x49,
-0x45, 0x20, 0x36, 0x2e, 0x30, 0x3b, 0x20, 0x57,
-0x69, 0x6e, 0x64, 0x6f, 0x77, 0x73, 0x20, 0x4e,
-0x54, 0x20, 0x35, 0x2e, 0x31, 0x3b, 0x20, 0x53,
-0x56, 0x31, 0x3b, 0x20, 0x47, 0x6f, 0x6f, 0x67,
-0x6c, 0x65, 0x54, 0x35, 0x3b, 0x20, 0x2e, 0x4e,
-0x45, 0x54, 0x20, 0x43, 0x4c, 0x52, 0x20, 0x32,
-0x2e, 0x30, 0x2e, 0x35, 0x30, 0x37, 0x32, 0x37,
-0x3b, 0x20, 0x2e, 0x4e, 0x45, 0x54, 0x20, 0x43,
-0x4c, 0x52, 0x20, 0x33, 0x2e, 0x30, 0x2e, 0x30,
-0x34, 0x35, 0x30, 0x36, 0x2e, 0x36, 0x34, 0x38,
-0x3b, 0x20, 0x2e, 0x4e, 0x45, 0x54, 0x20, 0x43,
-0x4c, 0x52, 0x20, 0x33, 0x2e, 0x35, 0x2e, 0x32,
-0x31, 0x30, 0x32, 0x32, 0x29, 0x0d, 0x0a, 0x48,
-0x6f, 0x73, 0x74, 0x3a, 0x20, 0x31, 0x39, 0x32,
-0x2e, 0x31, 0x36, 0x38, 0x2e, 0x30, 0x2e, 0x31,
-0x32, 0x0d, 0x0a, 0x43, 0x6f, 0x6e, 0x6e, 0x65,
-0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3a, 0x20, 0x4b,
-0x65, 0x65, 0x70, 0x2d, 0x41, 0x6c, 0x69, 0x76,
-0x65, 0x0d, 0x0a, 0x0d, 0x0a };
-
-char pkt5[] = {
-0x00, 0x14, 0x22, 0xcb, 0x18, 0x2d, 0x00, 0x01,
-0x02, 0x45, 0x09, 0x11, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x2c, 0x00, 0x02, 0x00, 0x00, 0x40, 0x06,
-0xf8, 0xa5, 0xc0, 0xa8, 0x00, 0x0c, 0xc0, 0xa8,
-0x00, 0xc8, 0x00, 0x50, 0x0f, 0xe2, 0x00, 0x00,
-0x06, 0x68, 0x09, 0xe7, 0xc7, 0x36, 0x60, 0x12,
-0x05, 0x92, 0x28, 0xca, 0x00, 0x00, 0x02, 0x04,
-0x05, 0x92 };
-
-char pkt6[] = {
-0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14,
-0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x28, 0x09, 0xa1, 0x40, 0x00, 0x80, 0x06,
-0x6f, 0x0a, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8,
-0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7,
-0xc9, 0x35, 0x00, 0x00, 0x06, 0x69, 0x50, 0x10,
-0x42, 0xd8, 0x82, 0x3f, 0x00, 0x00 };
-
-char pkt7[] = {
-0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14,
-0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00,
-0x02, 0x27, 0x09, 0xa2, 0x40, 0x00, 0x80, 0x06,
-0x6d, 0x0a, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8,
-0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7,
-0xc7, 0x36, 0x00, 0x00, 0x06, 0x69, 0x50, 0x18,
-0x42, 0xd8, 0x84, 0x3e, 0x00, 0x00, 0x47, 0x45,
-0x54, 0x20, 0x2f, 0x20, 0x48, 0x54, 0x54, 0x50,
-0x2f, 0x31, 0x2e, 0x31, 0x0d, 0x0a, 0x41, 0x63,
-0x63, 0x65, 0x70, 0x74, 0x3a, 0x20, 0x69, 0x6d,
-0x61, 0x67, 0x65, 0x2f, 0x67, 0x69, 0x66, 0x2c,
-0x20, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x2f, 0x78,
-0x2d, 0x78, 0x62, 0x69, 0x74, 0x6d, 0x61, 0x70,
-0x2c, 0x20, 0x69, 0x6d, 0x61, 0x67, 0x65, 0x2f,
-0x6a, 0x70, 0x65, 0x67, 0x2c, 0x20, 0x69, 0x6d,
-0x61, 0x67, 0x65, 0x2f, 0x70, 0x6a, 0x70, 0x65,
-0x67, 0x2c, 0x20, 0x61, 0x70, 0x70, 0x6c, 0x69,
-0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x2f, 0x76,
-0x6e, 0x64, 0x2e, 0x6d, 0x73, 0x2d, 0x65, 0x78,
-0x63, 0x65, 0x6c, 0x2c, 0x20, 0x61, 0x70, 0x70,
-0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e,
-0x2f, 0x6d, 0x73, 0x77, 0x6f, 0x72, 0x64, 0x2c,
-0x20, 0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61,
-0x74, 0x69, 0x6f, 0x6e, 0x2f, 0x76, 0x6e, 0x64,
-0x2e, 0x6d, 0x73, 0x2d, 0x70, 0x6f, 0x77, 0x65,
-0x72, 0x70, 0x6f, 0x69, 0x6e, 0x74, 0x2c, 0x20,
-0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, 0x74,
-0x69, 0x6f, 0x6e, 0x2f, 0x78, 0x2d, 0x6d, 0x73,
-0x2d, 0x61, 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61,
-0x74, 0x69, 0x6f, 0x6e, 0x2c, 0x20, 0x61, 0x70,
-0x70, 0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f,
-0x6e, 0x2f, 0x78, 0x2d, 0x6d, 0x73, 0x2d, 0x78,
-0x62, 0x61, 0x70, 0x2c, 0x20, 0x61, 0x70, 0x70,
-0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e,
-0x2f, 0x76, 0x6e, 0x64, 0x2e, 0x6d, 0x73, 0x2d,
-0x78, 0x70, 0x73, 0x64, 0x6f, 0x63, 0x75, 0x6d,
-0x65, 0x6e, 0x74, 0x2c, 0x20, 0x61, 0x70, 0x70,
-0x6c, 0x69, 0x63, 0x61, 0x74, 0x69, 0x6f, 0x6e,
-0x2f, 0x78, 0x61, 0x6d, 0x6c, 0x2b, 0x78, 0x6d,
-0x6c, 0x2c, 0x20, 0x2a, 0x2f, 0x2a, 0x0d, 0x0a,
-0x41, 0x63, 0x63, 0x65, 0x70, 0x74, 0x2d, 0x4c,
-0x61, 0x6e, 0x67, 0x75, 0x61, 0x67, 0x65, 0x3a,
-0x20, 0x65, 0x6e, 0x2d, 0x67, 0x62, 0x0d, 0x0a,
-0x41, 0x63, 0x63, 0x65, 0x70, 0x74, 0x2d, 0x45,
-0x6e, 0x63, 0x6f, 0x64, 0x69, 0x6e, 0x67, 0x3a,
-0x20, 0x67, 0x7a, 0x69, 0x70, 0x2c, 0x20, 0x64,
-0x65, 0x66, 0x6c, 0x61, 0x74, 0x65, 0x0d, 0x0a,
-0x55, 0x73, 0x65, 0x72, 0x2d, 0x41, 0x67, 0x65,
-0x6e, 0x74, 0x3a, 0x20, 0x4d, 0x6f, 0x7a, 0x69,
-0x6c, 0x6c, 0x61, 0x2f, 0x34, 0x2e, 0x30, 0x20,
-0x28, 0x63, 0x6f, 0x6d, 0x70, 0x61, 0x74, 0x69,
-0x62, 0x6c, 0x65, 0x3b, 0x20, 0x4d, 0x53, 0x49,
-0x45, 0x20, 0x36, 0x2e, 0x30, 0x3b, 0x20, 0x57,
-0x69, 0x6e, 0x64, 0x6f, 0x77, 0x73, 0x20, 0x4e,
-0x54, 0x20, 0x35, 0x2e, 0x31, 0x3b, 0x20, 0x53,
-0x56, 0x31, 0x3b, 0x20, 0x47, 0x6f, 0x6f, 0x67,
-0x6c, 0x65, 0x54, 0x35, 0x3b, 0x20, 0x2e, 0x4e,
-0x45, 0x54, 0x20, 0x43, 0x4c, 0x52, 0x20, 0x32,
-0x2e, 0x30, 0x2e, 0x35, 0x30, 0x37, 0x32, 0x37,
-0x3b, 0x20, 0x2e, 0x4e, 0x45, 0x54, 0x20, 0x43,
-0x4c, 0x52, 0x20, 0x33, 0x2e, 0x30, 0x2e, 0x30,
-0x34, 0x35, 0x30, 0x36, 0x2e, 0x36, 0x34, 0x38,
-0x3b, 0x20, 0x2e, 0x4e, 0x45, 0x54, 0x20, 0x43,
-0x4c, 0x52, 0x20, 0x33, 0x2e, 0x35, 0x2e, 0x32,
-0x31, 0x30, 0x32, 0x32, 0x29, 0x0d, 0x0a, 0x48,
-0x6f, 0x73, 0x74, 0x3a, 0x20, 0x31, 0x39, 0x32,
-0x2e, 0x31, 0x36, 0x38, 0x2e, 0x30, 0x2e, 0x31,
-0x32, 0x0d, 0x0a, 0x43, 0x6f, 0x6e, 0x6e, 0x65,
-0x63, 0x74, 0x69, 0x6f, 0x6e, 0x3a, 0x20, 0x4b,
-0x65, 0x65, 0x70, 0x2d, 0x41, 0x6c, 0x69, 0x76,
-0x65, 0x0d, 0x0a, 0x0d, 0x0a };
-
-char pkt8[] = {
-0x00, 0x14, 0x22, 0xcb, 0x18, 0x2d, 0x00, 0x01,
-0x02, 0x45, 0x09, 0x11, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x2c, 0x00, 0x03, 0x00, 0x00, 0x40, 0x06,
-0xf8, 0xa4, 0xc0, 0xa8, 0x00, 0x0c, 0xc0, 0xa8,
-0x00, 0xc8, 0x00, 0x50, 0x0f, 0xe2, 0x00, 0x00,
-0x06, 0x68, 0x09, 0xe7, 0xc7, 0x36, 0x60, 0x12,
-0x05, 0x92, 0x28, 0xca, 0x00, 0x00, 0x02, 0x04,
-0x05, 0x92 };
-
-char pkt9[] = {
-0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14,
-0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x28, 0x09, 0xa3, 0x40, 0x00, 0x80, 0x06,
-0x6f, 0x08, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8,
-0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7,
-0xc9, 0x35, 0x00, 0x00, 0x06, 0x69, 0x50, 0x10,
-0x42, 0xd8, 0x82, 0x3f, 0x00, 0x00 };
-
-char pkt10[] = {
-0x00, 0x14, 0x22, 0xcb, 0x18, 0x2d, 0x00, 0x01,
-0x02, 0x45, 0x09, 0x11, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x2c, 0x00, 0x04, 0x00, 0x00, 0x40, 0x06,
-0xf8, 0xa3, 0xc0, 0xa8, 0x00, 0x0c, 0xc0, 0xa8,
-0x00, 0xc8, 0x00, 0x50, 0x0f, 0xe2, 0x00, 0x00,
-0x06, 0x68, 0x09, 0xe7, 0xc7, 0x36, 0x60, 0x12,
-0x05, 0x92, 0x28, 0xca, 0x00, 0x00, 0x02, 0x04,
-0x05, 0x92 };
-
-char pkt11[] = {
-0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14,
-0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x28, 0x09, 0xa6, 0x40, 0x00, 0x80, 0x06,
-0x6f, 0x05, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8,
-0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7,
-0xc9, 0x35, 0x00, 0x00, 0x06, 0x69, 0x50, 0x10,
-0x42, 0xd8, 0x82, 0x3f, 0x00, 0x00 };
-
-char pkt12[] = {
-0x00, 0x01, 0x02, 0x45, 0x09, 0x11, 0x00, 0x14,
-0x22, 0xcb, 0x18, 0x2d, 0x08, 0x00, 0x45, 0x00,
-0x00, 0x28, 0x09, 0xa7, 0x40, 0x00, 0x80, 0x06,
-0x6f, 0x04, 0xc0, 0xa8, 0x00, 0xc8, 0xc0, 0xa8,
-0x00, 0x0c, 0x0f, 0xe2, 0x00, 0x50, 0x09, 0xe7,
-0xc9, 0x35, 0x00, 0x00, 0x06, 0x69, 0x50, 0x14,
-0x00, 0x00, 0x43, 0xf4, 0x00, 0x00 };
-
-
-typedef struct
-{
-	char *pcData;
-	int iDataLen;
-} xPacketData;
-
-xPacketData xAllPackets[] =
-{
-	{ pkt1, sizeof( pkt1 ) },
-//	{ pkt2, sizeof( pkt2 ) },
-	{ pkt3, sizeof( pkt3 ) },
-	{ pkt4, sizeof( pkt4 ) },
-//	{ pkt5, sizeof( pkt5 ) },
-	{ pkt6, sizeof( pkt6 ) },
-	{ pkt7, sizeof( pkt7 ) },
-	{ pkt8, sizeof( pkt8 ) },
-	{ pkt9, sizeof( pkt9 ) },
-	{ pkt10, sizeof( pkt10 ) },
-//	{ pkt11, sizeof( pkt11 ) },
-//	{ pkt12, sizeof( pkt12 ) },
-//	{ pkt13, sizeof( pkt13 ) },
-//	{ pkt14, sizeof( pkt14 ) },
-//	{ pkt15, sizeof( pkt15 ) },
-//	{ pkt16, sizeof( pkt16 ) },
-};
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/Win32-Extensions.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/Win32-Extensions.h
deleted file mode 100644
index bad7c33ac..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/Win32-Extensions.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (c) 1999 - 2005 NetGroup, Politecnico di Torino (Italy)
- * Copyright (c) 2005 - 2006 CACE Technologies, Davis (California)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Politecnico di Torino, CACE Technologies 
- * nor the names of its contributors may be used to endorse or promote 
- * products derived from this software without specific prior written 
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-
-#ifndef __WIN32_EXTENSIONS_H__
-#define __WIN32_EXTENSIONS_H__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Definitions */
-
-/*!
-  \brief A queue of raw packets that will be sent to the network with pcap_sendqueue_transmit().
-*/
-struct pcap_send_queue
-{
-	u_int maxlen;		///< Maximum size of the the queue, in bytes. This variable contains the size of the buffer field.
-	u_int len;			///< Current size of the queue, in bytes.
-	char *buffer;		///< Buffer containing the packets to be sent.
-};
-
-typedef struct pcap_send_queue pcap_send_queue;
-
-/*!
-  \brief This typedef is a support for the pcap_get_airpcap_handle() function
-*/
-#if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_)
-#define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_
-typedef struct _AirpcapHandle *PAirpcapHandle;
-#endif
-
-#define		BPF_MEM_EX_IMM	0xc0
-#define		BPF_MEM_EX_IND	0xe0
-
-/*used for ST*/
-#define		BPF_MEM_EX		0xc0
-#define		BPF_TME					0x08
-
-#define		BPF_LOOKUP				0x90   
-#define		BPF_EXECUTE				0xa0
-#define		BPF_INIT				0xb0
-#define		BPF_VALIDATE			0xc0
-#define		BPF_SET_ACTIVE			0xd0
-#define		BPF_RESET				0xe0
-#define		BPF_SET_MEMORY			0x80
-#define		BPF_GET_REGISTER_VALUE	0x70
-#define		BPF_SET_REGISTER_VALUE	0x60
-#define		BPF_SET_WORKING			0x50
-#define		BPF_SET_ACTIVE_READ		0x40
-#define		BPF_SET_AUTODELETION	0x30
-#define		BPF_SEPARATION			0xff
-
-/* Prototypes */
-pcap_send_queue* pcap_sendqueue_alloc(u_int memsize);
-
-void pcap_sendqueue_destroy(pcap_send_queue* queue);
-
-int pcap_sendqueue_queue(pcap_send_queue* queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data);
-
-u_int pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue* queue, int sync);
-
-HANDLE pcap_getevent(pcap_t *p);
-
-struct pcap_stat *pcap_stats_ex(pcap_t *p, int *pcap_stat_size);
-
-int pcap_setuserbuffer(pcap_t *p, int size);
-
-int pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks);
-
-int pcap_live_dump_ended(pcap_t *p, int sync);
-
-int pcap_offline_filter(struct bpf_program *prog, const struct pcap_pkthdr *header, const u_char *pkt_data);
-
-int pcap_start_oem(char* err_str, int flags);
-
-PAirpcapHandle pcap_get_airpcap_handle(pcap_t *p);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif //__WIN32_EXTENSIONS_H__
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/bittypes.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/bittypes.h
deleted file mode 100644
index f55fcecfd..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/bittypes.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright (C) 1999 WIDE Project.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the project nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-#ifndef _BITTYPES_H
-#define _BITTYPES_H
-
-#ifndef HAVE_U_INT8_T
-
-#if SIZEOF_CHAR == 1
-typedef unsigned char u_int8_t;
-typedef signed char _int8_t;
-#elif SIZEOF_INT == 1
-typedef unsigned int u_int8_t;
-typedef signed int int8_t;
-#else  /* XXX */
-#error "there's no appropriate type for u_int8_t"
-#endif
-#define HAVE_U_INT8_T 1
-#define HAVE_INT8_T 1
-
-#endif /* HAVE_U_INT8_T */
-
-#ifndef HAVE_U_INT16_T 
-
-#if SIZEOF_SHORT == 2
-typedef unsigned short u_int16_t;
-typedef signed short _int16_t;
-#elif SIZEOF_INT == 2
-typedef unsigned int u_int16_t;
-typedef signed int int16_t;
-#elif SIZEOF_CHAR == 2
-typedef unsigned char u_int16_t;
-typedef signed char int16_t;
-#else  /* XXX */
-#error "there's no appropriate type for u_int16_t"
-#endif
-#define HAVE_U_INT16_T 1
-#define HAVE_INT16_T 1
-
-#endif /* HAVE_U_INT16_T */
-
-#ifndef HAVE_U_INT32_T
-
-#if SIZEOF_INT == 4
-typedef unsigned int u_int32_t;
-typedef signed int _int32_t;
-#elif SIZEOF_LONG == 4
-typedef unsigned long u_int32_t;
-typedef signed long int32_t;
-#elif SIZEOF_SHORT == 4
-typedef unsigned short u_int32_t;
-typedef signed short int32_t;
-#else  /* XXX */
-#error "there's no appropriate type for u_int32_t"
-#endif
-#define HAVE_U_INT32_T 1
-#define HAVE_INT32_T 1
-
-#endif /* HAVE_U_INT32_T */
-
-#ifndef HAVE_U_INT64_T
-#if SIZEOF_LONG_LONG == 8
-typedef unsigned long long u_int64_t;
-typedef long long int64_t;
-#elif defined(_MSC_EXTENSIONS)
-typedef unsigned _int64 u_int64_t;
-typedef _int64 int64_t;
-#elif SIZEOF_INT == 8
-typedef unsigned int u_int64_t;
-#elif SIZEOF_LONG == 8
-typedef unsigned long u_int64_t;
-#elif SIZEOF_SHORT == 8
-typedef unsigned short u_int64_t;
-#else  /* XXX */
-#error "there's no appropriate type for u_int64_t"
-#endif
-
-#endif /* HAVE_U_INT64_T */
-
-#ifndef PRId64
-#ifdef _MSC_EXTENSIONS
-#define PRId64	"I64d"
-#else /* _MSC_EXTENSIONS */
-#define PRId64	"lld"
-#endif /* _MSC_EXTENSIONS */
-#endif /* PRId64 */
-
-#ifndef PRIo64
-#ifdef _MSC_EXTENSIONS
-#define PRIo64	"I64o"
-#else /* _MSC_EXTENSIONS */
-#define PRIo64	"llo"
-#endif /* _MSC_EXTENSIONS */
-#endif /* PRIo64 */
-
-#ifndef PRIx64
-#ifdef _MSC_EXTENSIONS
-#define PRIx64	"I64x"
-#else /* _MSC_EXTENSIONS */
-#define PRIx64	"llx"
-#endif /* _MSC_EXTENSIONS */
-#endif /* PRIx64 */
-
-#ifndef PRIu64
-#ifdef _MSC_EXTENSIONS
-#define PRIu64	"I64u"
-#else /* _MSC_EXTENSIONS */
-#define PRIu64	"llu"
-#endif /* _MSC_EXTENSIONS */
-#endif /* PRIu64 */
-
-#endif /* _BITTYPES_H */
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/ip6_misc.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/ip6_misc.h
deleted file mode 100644
index 562fa6184..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/ip6_misc.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Copyright (c) 1993, 1994, 1997
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that: (1) source code distributions
- * retain the above copyright notice and this paragraph in its entirety, (2)
- * distributions including binary code include the above copyright notice and
- * this paragraph in its entirety in the documentation or other materials
- * provided with the distribution, and (3) all advertising materials mentioning
- * features or use of this software display the following acknowledgement:
- * ``This product includes software developed by the University of California,
- * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
- * the University nor the names of its contributors may be used to endorse
- * or promote products derived from this software without specific prior
- * written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/Win32/Include/ip6_misc.h,v 1.5 2006-01-22 18:02:18 gianluca Exp $ (LBL)
- */
-
-/*
- * This file contains a collage of declarations for IPv6 from FreeBSD not present in Windows
- */
-
-#include <winsock2.h>
-
-#include <ws2tcpip.h>
-
-#ifndef __MINGW32__
-#define	IN_MULTICAST(a)		IN_CLASSD(a)
-#endif
-
-#define	IN_EXPERIMENTAL(a)	((((u_int32_t) (a)) & 0xf0000000) == 0xf0000000)
-
-#define	IN_LOOPBACKNET		127
-
-#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)
-/* IPv6 address */
-struct in6_addr
-  {
-    union
-      {
-	u_int8_t		u6_addr8[16];
-	u_int16_t	u6_addr16[8];
-	u_int32_t	u6_addr32[4];
-      } in6_u;
-#define s6_addr			in6_u.u6_addr8
-#define s6_addr16		in6_u.u6_addr16
-#define s6_addr32		in6_u.u6_addr32
-#define s6_addr64		in6_u.u6_addr64
-  };
-
-#define IN6ADDR_ANY_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
-#define IN6ADDR_LOOPBACK_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 }
-#endif /* __MINGW32__ */
-
-
-#if (defined _MSC_VER) || (defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF))
-typedef unsigned short	sa_family_t;
-#endif
-
-
-#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)
-
-#define	__SOCKADDR_COMMON(sa_prefix) \
-  sa_family_t sa_prefix##family
-
-/* Ditto, for IPv6.  */
-struct sockaddr_in6
-  {
-    __SOCKADDR_COMMON (sin6_);
-    u_int16_t sin6_port;		/* Transport layer port # */
-    u_int32_t sin6_flowinfo;	/* IPv6 flow information */
-    struct in6_addr sin6_addr;	/* IPv6 address */
-  };
-
-#define IN6_IS_ADDR_V4MAPPED(a) \
-	((((u_int32_t *) (a))[0] == 0) && (((u_int32_t *) (a))[1] == 0) && \
-	 (((u_int32_t *) (a))[2] == htonl (0xffff)))
-
-#define IN6_IS_ADDR_MULTICAST(a) (((u_int8_t *) (a))[0] == 0xff)
-
-#define IN6_IS_ADDR_LINKLOCAL(a) \
-	((((u_int32_t *) (a))[0] & htonl (0xffc00000)) == htonl (0xfe800000))
-
-#define IN6_IS_ADDR_LOOPBACK(a) \
-	(((u_int32_t *) (a))[0] == 0 && ((u_int32_t *) (a))[1] == 0 && \
-	 ((u_int32_t *) (a))[2] == 0 && ((u_int32_t *) (a))[3] == htonl (1))
-#endif /* __MINGW32__ */
-
-#define ip6_vfc   ip6_ctlun.ip6_un2_vfc
-#define ip6_flow  ip6_ctlun.ip6_un1.ip6_un1_flow
-#define ip6_plen  ip6_ctlun.ip6_un1.ip6_un1_plen
-#define ip6_nxt   ip6_ctlun.ip6_un1.ip6_un1_nxt
-#define ip6_hlim  ip6_ctlun.ip6_un1.ip6_un1_hlim
-#define ip6_hops  ip6_ctlun.ip6_un1.ip6_un1_hlim
-
-#define nd_rd_type               nd_rd_hdr.icmp6_type
-#define nd_rd_code               nd_rd_hdr.icmp6_code
-#define nd_rd_cksum              nd_rd_hdr.icmp6_cksum
-#define nd_rd_reserved           nd_rd_hdr.icmp6_data32[0]
-
-/*
- *	IPV6 extension headers
- */
-#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
-#define IPPROTO_IPV6		41  /* IPv6 header.  */
-#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
-#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
-#define IPPROTO_ESP		50	/* encapsulating security payload */
-#define IPPROTO_AH		51	/* authentication header	*/
-#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
-#define IPPROTO_NONE		59	/* IPv6 no next header		*/
-#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
-#define IPPROTO_PIM			103 /* Protocol Independent Multicast.  */
-
-#define	 IPV6_RTHDR_TYPE_0 0
-
-/* Option types and related macros */
-#define IP6OPT_PAD1		0x00	/* 00 0 00000 */
-#define IP6OPT_PADN		0x01	/* 00 0 00001 */
-#define IP6OPT_JUMBO		0xC2	/* 11 0 00010 = 194 */
-#define IP6OPT_JUMBO_LEN	6
-#define IP6OPT_ROUTER_ALERT	0x05	/* 00 0 00101 */
-
-#define IP6OPT_RTALERT_LEN	4
-#define IP6OPT_RTALERT_MLD	0	/* Datagram contains an MLD message */
-#define IP6OPT_RTALERT_RSVP	1	/* Datagram contains an RSVP message */
-#define IP6OPT_RTALERT_ACTNET	2 	/* contains an Active Networks msg */
-#define IP6OPT_MINLEN		2
-
-#define IP6OPT_BINDING_UPDATE	0xc6	/* 11 0 00110 */
-#define IP6OPT_BINDING_ACK	0x07	/* 00 0 00111 */
-#define IP6OPT_BINDING_REQ	0x08	/* 00 0 01000 */
-#define IP6OPT_HOME_ADDRESS	0xc9	/* 11 0 01001 */
-#define IP6OPT_EID		0x8a	/* 10 0 01010 */
-
-#define IP6OPT_TYPE(o)		((o) & 0xC0)
-#define IP6OPT_TYPE_SKIP	0x00
-#define IP6OPT_TYPE_DISCARD	0x40
-#define IP6OPT_TYPE_FORCEICMP	0x80
-#define IP6OPT_TYPE_ICMP	0xC0
-
-#define IP6OPT_MUTABLE		0x20
-
-
-#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)
-#ifndef EAI_ADDRFAMILY
-struct addrinfo {
-	int	ai_flags;	/* AI_PASSIVE, AI_CANONNAME */
-	int	ai_family;	/* PF_xxx */
-	int	ai_socktype;	/* SOCK_xxx */
-	int	ai_protocol;	/* 0 or IPPROTO_xxx for IPv4 and IPv6 */
-	size_t	ai_addrlen;	/* length of ai_addr */
-	char	*ai_canonname;	/* canonical name for hostname */
-	struct sockaddr *ai_addr;	/* binary address */
-	struct addrinfo *ai_next;	/* next structure in linked list */
-};
-#endif
-#endif /* __MINGW32__ */
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/netif.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/netif.h
deleted file mode 100644
index 447db9182..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/netif.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * FreeRTOS V202112.00
- * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of
- * this software and associated documentation files (the "Software"), to deal in
- * the Software without restriction, including without limitation the rights to
- * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- * the Software, and to permit persons to whom the Software is furnished to do so,
- * subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all
- * copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
- * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
- * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * https://www.FreeRTOS.org
- * https://aws.amazon.com/freertos
- *
- */
-
-#ifndef NET_IF_H
-#define NET_IF_H
-
-/*
- * Send uip_len bytes from uip_buf to the network interface selected by the 
- * configNETWORK_INTERFACE_TO_USE constant (defined in FreeRTOSConfig.h). 
- */
-void vNetifTx( void );
-
-/*
- * Receive bytes from the network interface selected by the 
- * configNETWORK_INTERFACE_TO_USE constant (defined in FreeRTOSConfig.h).  The
- * bytes are placed in uip_buf.  The number of bytes copied into uip_buf is
- * returned.
- */
-UBaseType_t uxNetifRx( void );
-
-/*
- * Prepare a packet capture session.  This will print out all the network 
- * interfaces available, and the one actually used is set by the 
- * configNETWORK_INTERFACE_TO_USE constant that is defined in 
- * FreeRTOSConfig.h. */
-BaseType_t xNetifInit( void );
-
-#endif /* NET_IF_H */
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap-bpf.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap-bpf.h
deleted file mode 100644
index 5fe129dbb..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap-bpf.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*-
- * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from the Stanford/CMU enet packet filter,
- * (net/enet.c) distributed as part of 4.3BSD, and code contributed
- * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence 
- * Berkeley Laboratory.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by the University of
- *      California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap-bpf.h,v 1.50 2007/04/01 21:43:55 guy Exp $ (LBL)
- */
-
-/*
- * For backwards compatibility.
- *
- * Note to OS vendors: do NOT get rid of this file!  Some applications
- * might expect to be able to include <pcap-bpf.h>.
- */
-#include <pcap/bpf.h>
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap-namedb.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap-namedb.h
deleted file mode 100644
index 80a2f0040..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap-namedb.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (c) 1994, 1996
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the Computer Systems
- *	Engineering Group at Lawrence Berkeley Laboratory.
- * 4. Neither the name of the University nor of the Laboratory may be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap-namedb.h,v 1.13 2006/10/04 18:13:32 guy Exp $ (LBL)
- */
-
-/*
- * For backwards compatibility.
- *
- * Note to OS vendors: do NOT get rid of this file!  Some applications
- * might expect to be able to include <pcap-namedb.h>.
- */
-#include <pcap/namedb.h>
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap-stdinc.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap-stdinc.h
deleted file mode 100644
index 417604177..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap-stdinc.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright (c) 2002 - 2005 NetGroup, Politecnico di Torino (Italy)
- * Copyright (c) 2005 - 2009 CACE Technologies, Inc. Davis (California)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Politecnico di Torino nor the names of its
- * contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap-stdinc.h,v 1.10.2.1 2008-10-06 15:38:39 gianluca Exp $ (LBL)
- */
-
-#define SIZEOF_CHAR 1
-#define SIZEOF_SHORT 2
-#define SIZEOF_INT 4
-#ifndef _MSC_EXTENSIONS
-#define SIZEOF_LONG_LONG 8
-#endif
-
-/*
- * Avoids a compiler warning in case this was already defined      
- * (someone defined _WINSOCKAPI_ when including 'windows.h', in order
- * to prevent it from including 'winsock.h')
- */
-#ifdef _WINSOCKAPI_
-#undef _WINSOCKAPI_
-#endif
-#include <winsock2.h>
-
-#include <fcntl.h>
-
-#include "bittypes.h"
-#include <time.h>
-#include <io.h>
-
-#ifndef __MINGW32__
-#include "IP6_misc.h"
-#endif
-
-#define caddr_t char*
-
-#if _MSC_VER < 1500
-#define snprintf _snprintf
-#define vsnprintf _vsnprintf
-#define strdup _strdup
-#endif
-
-#define inline __inline 
-
-#ifdef __MINGW32__
-#include <stdint.h>
-#else /*__MINGW32__*/
-/* MSVC compiler */
-#ifndef _UINTPTR_T_DEFINED
-#ifdef  _WIN64
-typedef unsigned __int64    uintptr_t;
-#else
-typedef _W64 unsigned int   uintptr_t;
-#endif
-#define _UINTPTR_T_DEFINED
-#endif
-
-#ifndef _INTPTR_T_DEFINED
-#ifdef  _WIN64
-typedef __int64    intptr_t;
-#else
-typedef _W64 int   intptr_t;
-#endif
-#define _INTPTR_T_DEFINED
-#endif 
-
-#endif /*__MINGW32__*/
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap.h
deleted file mode 100644
index 935f9494c..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (c) 1993, 1994, 1995, 1996, 1997
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the Computer Systems
- *	Engineering Group at Lawrence Berkeley Laboratory.
- * 4. Neither the name of the University nor of the Laboratory may be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap.h,v 1.59 2006/10/04 18:09:22 guy Exp $ (LBL)
- */
-
-/*
- * For backwards compatibility.
- *
- * Note to OS vendors: do NOT get rid of this file!  Many applications
- * expect to be able to include <pcap.h>, and at least some of them
- * go through contortions in their configure scripts to try to detect
- * OSes that have "helpfully" moved pcap.h to <pcap/pcap.h> without
- * leaving behind a <pcap.h> file.
- */
-#include <pcap/pcap.h>
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/bluetooth.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/bluetooth.h
deleted file mode 100644
index 7bf65df03..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/bluetooth.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2006 Paolo Abeni (Italy)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote 
- * products derived from this software without specific prior written 
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * bluetooth data struct
- * By Paolo Abeni <paolo.abeni@email.it>
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap/bluetooth.h,v 1.1 2007/09/22 02:10:17 guy Exp $
- */
- 
-#ifndef _PCAP_BLUETOOTH_STRUCTS_H__
-#define _PCAP_BLUETOOTH_STRUCTS_H__
-
-/*
- * Header prepended libpcap to each bluetooth h:4 frame.
- * fields are in network byte order
- */
-typedef struct _pcap_bluetooth_h4_header {
-	u_int32_t direction; /* if first bit is set direction is incoming */
-} pcap_bluetooth_h4_header;
-
-
-#endif
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/bpf.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/bpf.h
deleted file mode 100644
index 9f4ca33e3..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/bpf.h
+++ /dev/null
@@ -1,934 +0,0 @@
-/*-
- * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from the Stanford/CMU enet packet filter,
- * (net/enet.c) distributed as part of 4.3BSD, and code contributed
- * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence 
- * Berkeley Laboratory.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by the University of
- *      California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      @(#)bpf.h       7.1 (Berkeley) 5/7/91
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap/bpf.h,v 1.19.2.8 2008-09-22 20:16:01 guy Exp $ (LBL)
- */
-
-/*
- * This is libpcap's cut-down version of bpf.h; it includes only
- * the stuff needed for the code generator and the userland BPF
- * interpreter, and the libpcap APIs for setting filters, etc..
- *
- * "pcap-bpf.c" will include the native OS version, as it deals with
- * the OS's BPF implementation.
- *
- * XXX - should this all just be moved to "pcap.h"?
- */
-
-#ifndef BPF_MAJOR_VERSION
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* BSD style release date */
-#define BPF_RELEASE 199606
-
-#ifdef MSDOS /* must be 32-bit */
-typedef long          bpf_int32;
-typedef unsigned long bpf_u_int32;
-#else
-typedef	int bpf_int32;
-typedef	u_int bpf_u_int32;
-#endif
-
-/*
- * Alignment macros.  BPF_WORDALIGN rounds up to the next 
- * even multiple of BPF_ALIGNMENT. 
- */
-#ifndef __NetBSD__
-#define BPF_ALIGNMENT sizeof(bpf_int32)
-#else
-#define BPF_ALIGNMENT sizeof(long)
-#endif
-#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
-
-#define BPF_MAXBUFSIZE 0x8000
-#define BPF_MINBUFSIZE 32
-
-/*
- * Structure for "pcap_compile()", "pcap_setfilter()", etc..
- */
-struct bpf_program {
-	u_int bf_len;
-	struct bpf_insn *bf_insns;
-};
- 
-/*
- * Struct return by BIOCVERSION.  This represents the version number of 
- * the filter language described by the instruction encodings below.
- * bpf understands a program iff kernel_major == filter_major &&
- * kernel_minor >= filter_minor, that is, if the value returned by the
- * running kernel has the same major number and a minor number equal
- * equal to or less than the filter being downloaded.  Otherwise, the
- * results are undefined, meaning an error may be returned or packets
- * may be accepted haphazardly.
- * It has nothing to do with the source code version.
- */
-struct bpf_version {
-	u_short bv_major;
-	u_short bv_minor;
-};
-/* Current version number of filter architecture. */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- * Data-link level type codes.
- *
- * Do *NOT* add new values to this list without asking
- * "tcpdump-workers@lists.tcpdump.org" for a value.  Otherwise, you run
- * the risk of using a value that's already being used for some other
- * purpose, and of having tools that read libpcap-format captures not
- * being able to handle captures with your new DLT_ value, with no hope
- * that they will ever be changed to do so (as that would destroy their
- * ability to read captures using that value for that other purpose).
- */
-
-/*
- * These are the types that are the same on all platforms, and that
- * have been defined by <net/bpf.h> for ages.
- */
-#define DLT_NULL	0	/* BSD loopback encapsulation */
-#define DLT_EN10MB	1	/* Ethernet (10Mb) */
-#define DLT_EN3MB	2	/* Experimental Ethernet (3Mb) */
-#define DLT_AX25	3	/* Amateur Radio AX.25 */
-#define DLT_PRONET	4	/* Proteon ProNET Token Ring */
-#define DLT_CHAOS	5	/* Chaos */
-#define DLT_IEEE802	6	/* 802.5 Token Ring */
-#define DLT_ARCNET	7	/* ARCNET, with BSD-style header */
-#define DLT_SLIP	8	/* Serial Line IP */
-#define DLT_PPP		9	/* Point-to-point Protocol */
-#define DLT_FDDI	10	/* FDDI */
-
-/*
- * These are types that are different on some platforms, and that
- * have been defined by <net/bpf.h> for ages.  We use #ifdefs to
- * detect the BSDs that define them differently from the traditional
- * libpcap <net/bpf.h>
- *
- * XXX - DLT_ATM_RFC1483 is 13 in BSD/OS, and DLT_RAW is 14 in BSD/OS,
- * but I don't know what the right #define is for BSD/OS.
- */
-#define DLT_ATM_RFC1483	11	/* LLC-encapsulated ATM */
-
-#ifdef __OpenBSD__
-#define DLT_RAW		14	/* raw IP */
-#else
-#define DLT_RAW		12	/* raw IP */
-#endif
-
-/*
- * Given that the only OS that currently generates BSD/OS SLIP or PPP
- * is, well, BSD/OS, arguably everybody should have chosen its values
- * for DLT_SLIP_BSDOS and DLT_PPP_BSDOS, which are 15 and 16, but they
- * didn't.  So it goes.
- */
-#if defined(__NetBSD__) || defined(__FreeBSD__)
-#ifndef DLT_SLIP_BSDOS
-#define DLT_SLIP_BSDOS	13	/* BSD/OS Serial Line IP */
-#define DLT_PPP_BSDOS	14	/* BSD/OS Point-to-point Protocol */
-#endif
-#else
-#define DLT_SLIP_BSDOS	15	/* BSD/OS Serial Line IP */
-#define DLT_PPP_BSDOS	16	/* BSD/OS Point-to-point Protocol */
-#endif
-
-/*
- * 17 is used for DLT_OLD_PFLOG in OpenBSD;
- *     OBSOLETE: DLT_PFLOG is 117 in OpenBSD now as well. See below.
- * 18 is used for DLT_PFSYNC in OpenBSD; don't use it for anything else.
- */
-
-#define DLT_ATM_CLIP	19	/* Linux Classical-IP over ATM */
-
-/*
- * Apparently Redback uses this for its SmartEdge 400/800.  I hope
- * nobody else decided to use it, too.
- */
-#define DLT_REDBACK_SMARTEDGE	32
-
-/*
- * These values are defined by NetBSD; other platforms should refrain from
- * using them for other purposes, so that NetBSD savefiles with link
- * types of 50 or 51 can be read as this type on all platforms.
- */
-#define DLT_PPP_SERIAL	50	/* PPP over serial with HDLC encapsulation */
-#define DLT_PPP_ETHER	51	/* PPP over Ethernet */
-
-/*
- * The Axent Raptor firewall - now the Symantec Enterprise Firewall - uses
- * a link-layer type of 99 for the tcpdump it supplies.  The link-layer
- * header has 6 bytes of unknown data, something that appears to be an
- * Ethernet type, and 36 bytes that appear to be 0 in at least one capture
- * I've seen.
- */
-#define DLT_SYMANTEC_FIREWALL	99
-
-/*
- * Values between 100 and 103 are used in capture file headers as
- * link-layer types corresponding to DLT_ types that differ
- * between platforms; don't use those values for new DLT_ new types.
- */
-
-/*
- * This value was defined by libpcap 0.5; platforms that have defined
- * it with a different value should define it here with that value -
- * a link type of 104 in a save file will be mapped to DLT_C_HDLC,
- * whatever value that happens to be, so programs will correctly
- * handle files with that link type regardless of the value of
- * DLT_C_HDLC.
- *
- * The name DLT_C_HDLC was used by BSD/OS; we use that name for source
- * compatibility with programs written for BSD/OS.
- *
- * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
- * for source compatibility with programs written for libpcap 0.5.
- */
-#define DLT_C_HDLC	104	/* Cisco HDLC */
-#define DLT_CHDLC	DLT_C_HDLC
-
-#define DLT_IEEE802_11	105	/* IEEE 802.11 wireless */
-
-/*
- * 106 is reserved for Linux Classical IP over ATM; it's like DLT_RAW,
- * except when it isn't.  (I.e., sometimes it's just raw IP, and
- * sometimes it isn't.)  We currently handle it as DLT_LINUX_SLL,
- * so that we don't have to worry about the link-layer header.)
- */
-
-/*
- * Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides
- * with other values.
- * DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header
- * (DLCI, etc.).
- */
-#define DLT_FRELAY	107
-
-/*
- * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
- * that the AF_ type in the link-layer header is in network byte order.
- *
- * DLT_LOOP is 12 in OpenBSD, but that's DLT_RAW in other OSes, so
- * we don't use 12 for it in OSes other than OpenBSD.
- */
-#ifdef __OpenBSD__
-#define DLT_LOOP	12
-#else
-#define DLT_LOOP	108
-#endif
-
-/*
- * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's
- * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other
- * than OpenBSD.
- */
-#ifdef __OpenBSD__
-#define DLT_ENC		13
-#else
-#define DLT_ENC		109
-#endif
-
-/*
- * Values between 110 and 112 are reserved for use in capture file headers
- * as link-layer types corresponding to DLT_ types that might differ
- * between platforms; don't use those values for new DLT_ types
- * other than the corresponding DLT_ types.
- */
-
-/*
- * This is for Linux cooked sockets.
- */
-#define DLT_LINUX_SLL	113
-
-/*
- * Apple LocalTalk hardware.
- */
-#define DLT_LTALK	114
-
-/*
- * Acorn Econet.
- */
-#define DLT_ECONET	115
-
-/*
- * Reserved for use with OpenBSD ipfilter.
- */
-#define DLT_IPFILTER	116
-
-/*
- * OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, but that's DLT_LANE8023
- * in SuSE 6.3, so we can't use 17 for it in capture-file headers.
- *
- * XXX: is there a conflict with DLT_PFSYNC 18 as well?
- */
-#ifdef __OpenBSD__
-#define DLT_OLD_PFLOG	17
-#define DLT_PFSYNC	18
-#endif
-#define DLT_PFLOG	117
-
-/*
- * Registered for Cisco-internal use.
- */
-#define DLT_CISCO_IOS	118
-
-/*
- * For 802.11 cards using the Prism II chips, with a link-layer
- * header including Prism monitor mode information plus an 802.11
- * header.
- */
-#define DLT_PRISM_HEADER	119
-
-/*
- * Reserved for Aironet 802.11 cards, with an Aironet link-layer header
- * (see Doug Ambrisko's FreeBSD patches).
- */
-#define DLT_AIRONET_HEADER	120
-
-/*
- * Reserved for Siemens HiPath HDLC.
- */
-#define DLT_HHDLC		121
-
-/*
- * This is for RFC 2625 IP-over-Fibre Channel.
- *
- * This is not for use with raw Fibre Channel, where the link-layer
- * header starts with a Fibre Channel frame header; it's for IP-over-FC,
- * where the link-layer header starts with an RFC 2625 Network_Header
- * field.
- */
-#define DLT_IP_OVER_FC		122
-
-/*
- * This is for Full Frontal ATM on Solaris with SunATM, with a
- * pseudo-header followed by an AALn PDU.
- *
- * There may be other forms of Full Frontal ATM on other OSes,
- * with different pseudo-headers.
- *
- * If ATM software returns a pseudo-header with VPI/VCI information
- * (and, ideally, packet type information, e.g. signalling, ILMI,
- * LANE, LLC-multiplexed traffic, etc.), it should not use
- * DLT_ATM_RFC1483, but should get a new DLT_ value, so tcpdump
- * and the like don't have to infer the presence or absence of a
- * pseudo-header and the form of the pseudo-header.
- */
-#define DLT_SUNATM		123	/* Solaris+SunATM */
-
-/* 
- * Reserved as per request from Kent Dahlgren <kent@praesum.com>
- * for private use.
- */
-#define DLT_RIO                 124     /* RapidIO */
-#define DLT_PCI_EXP             125     /* PCI Express */
-#define DLT_AURORA              126     /* Xilinx Aurora link layer */
-
-/*
- * Header for 802.11 plus a number of bits of link-layer information
- * including radio information, used by some recent BSD drivers as
- * well as the madwifi Atheros driver for Linux.
- */
-#define DLT_IEEE802_11_RADIO	127	/* 802.11 plus radiotap radio header */
-
-/*
- * Reserved for the TZSP encapsulation, as per request from
- * Chris Waters <chris.waters@networkchemistry.com>
- * TZSP is a generic encapsulation for any other link type,
- * which includes a means to include meta-information
- * with the packet, e.g. signal strength and channel
- * for 802.11 packets.
- */
-#define DLT_TZSP                128     /* Tazmen Sniffer Protocol */
-
-/*
- * BSD's ARCNET headers have the source host, destination host,
- * and type at the beginning of the packet; that's what's handed
- * up to userland via BPF.
- *
- * Linux's ARCNET headers, however, have a 2-byte offset field
- * between the host IDs and the type; that's what's handed up
- * to userland via PF_PACKET sockets.
- *
- * We therefore have to have separate DLT_ values for them.
- */
-#define DLT_ARCNET_LINUX	129	/* ARCNET */
-
-/*
- * Juniper-private data link types, as per request from
- * Hannes Gredler <hannes@juniper.net>.  The DLT_s are used
- * for passing on chassis-internal metainformation such as
- * QOS profiles, etc..
- */
-#define DLT_JUNIPER_MLPPP       130
-#define DLT_JUNIPER_MLFR        131
-#define DLT_JUNIPER_ES          132
-#define DLT_JUNIPER_GGSN        133
-#define DLT_JUNIPER_MFR         134
-#define DLT_JUNIPER_ATM2        135
-#define DLT_JUNIPER_SERVICES    136
-#define DLT_JUNIPER_ATM1        137
-
-/*
- * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund
- * <dieter@apple.com>.  The header that's presented is an Ethernet-like
- * header:
- *
- *	#define FIREWIRE_EUI64_LEN	8
- *	struct firewire_header {
- *		u_char  firewire_dhost[FIREWIRE_EUI64_LEN];
- *		u_char  firewire_shost[FIREWIRE_EUI64_LEN];
- *		u_short firewire_type;
- *	};
- *
- * with "firewire_type" being an Ethernet type value, rather than,
- * for example, raw GASP frames being handed up.
- */
-#define DLT_APPLE_IP_OVER_IEEE1394	138
-
-/*
- * Various SS7 encapsulations, as per a request from Jeff Morriss
- * <jeff.morriss[AT]ulticom.com> and subsequent discussions.
- */
-#define DLT_MTP2_WITH_PHDR	139	/* pseudo-header with various info, followed by MTP2 */
-#define DLT_MTP2		140	/* MTP2, without pseudo-header */
-#define DLT_MTP3		141	/* MTP3, without pseudo-header or MTP2 */
-#define DLT_SCCP		142	/* SCCP, without pseudo-header or MTP2 or MTP3 */
-
-/*
- * DOCSIS MAC frames.
- */
-#define DLT_DOCSIS		143
-
-/*
- * Linux-IrDA packets. Protocol defined at http://www.irda.org.
- * Those packets include IrLAP headers and above (IrLMP...), but
- * don't include Phy framing (SOF/EOF/CRC & byte stuffing), because Phy
- * framing can be handled by the hardware and depend on the bitrate.
- * This is exactly the format you would get capturing on a Linux-IrDA
- * interface (irdaX), but not on a raw serial port.
- * Note the capture is done in "Linux-cooked" mode, so each packet include
- * a fake packet header (struct sll_header). This is because IrDA packet
- * decoding is dependant on the direction of the packet (incomming or
- * outgoing).
- * When/if other platform implement IrDA capture, we may revisit the
- * issue and define a real DLT_IRDA...
- * Jean II
- */
-#define DLT_LINUX_IRDA		144
-
-/*
- * Reserved for IBM SP switch and IBM Next Federation switch.
- */
-#define DLT_IBM_SP		145
-#define DLT_IBM_SN		146
-
-/*
- * Reserved for private use.  If you have some link-layer header type
- * that you want to use within your organization, with the capture files
- * using that link-layer header type not ever be sent outside your
- * organization, you can use these values.
- *
- * No libpcap release will use these for any purpose, nor will any
- * tcpdump release use them, either.
- *
- * Do *NOT* use these in capture files that you expect anybody not using
- * your private versions of capture-file-reading tools to read; in
- * particular, do *NOT* use them in products, otherwise you may find that
- * people won't be able to use tcpdump, or snort, or Ethereal, or... to
- * read capture files from your firewall/intrusion detection/traffic
- * monitoring/etc. appliance, or whatever product uses that DLT_ value,
- * and you may also find that the developers of those applications will
- * not accept patches to let them read those files.
- *
- * Also, do not use them if somebody might send you a capture using them
- * for *their* private type and tools using them for *your* private type
- * would have to read them.
- *
- * Instead, ask "tcpdump-workers@lists.tcpdump.org" for a new DLT_ value,
- * as per the comment above, and use the type you're given.
- */
-#define DLT_USER0		147
-#define DLT_USER1		148
-#define DLT_USER2		149
-#define DLT_USER3		150
-#define DLT_USER4		151
-#define DLT_USER5		152
-#define DLT_USER6		153
-#define DLT_USER7		154
-#define DLT_USER8		155
-#define DLT_USER9		156
-#define DLT_USER10		157
-#define DLT_USER11		158
-#define DLT_USER12		159
-#define DLT_USER13		160
-#define DLT_USER14		161
-#define DLT_USER15		162
-
-/*
- * For future use with 802.11 captures - defined by AbsoluteValue
- * Systems to store a number of bits of link-layer information
- * including radio information:
- *
- *	http://www.shaftnet.org/~pizza/software/capturefrm.txt
- *
- * but it might be used by some non-AVS drivers now or in the
- * future.
- */
-#define DLT_IEEE802_11_RADIO_AVS 163	/* 802.11 plus AVS radio header */
-
-/*
- * Juniper-private data link type, as per request from
- * Hannes Gredler <hannes@juniper.net>.  The DLT_s are used
- * for passing on chassis-internal metainformation such as
- * QOS profiles, etc..
- */
-#define DLT_JUNIPER_MONITOR     164
-
-/*
- * Reserved for BACnet MS/TP.
- */
-#define DLT_BACNET_MS_TP	165
-
-/*
- * Another PPP variant as per request from Karsten Keil <kkeil@suse.de>.
- *
- * This is used in some OSes to allow a kernel socket filter to distinguish
- * between incoming and outgoing packets, on a socket intended to
- * supply pppd with outgoing packets so it can do dial-on-demand and
- * hangup-on-lack-of-demand; incoming packets are filtered out so they
- * don't cause pppd to hold the connection up (you don't want random
- * input packets such as port scans, packets from old lost connections,
- * etc. to force the connection to stay up).
- *
- * The first byte of the PPP header (0xff03) is modified to accomodate
- * the direction - 0x00 = IN, 0x01 = OUT.
- */
-#define DLT_PPP_PPPD		166
-
-/*
- * Names for backwards compatibility with older versions of some PPP
- * software; new software should use DLT_PPP_PPPD.
- */
-#define DLT_PPP_WITH_DIRECTION	DLT_PPP_PPPD
-#define DLT_LINUX_PPP_WITHDIRECTION	DLT_PPP_PPPD
-
-/*
- * Juniper-private data link type, as per request from
- * Hannes Gredler <hannes@juniper.net>.  The DLT_s are used
- * for passing on chassis-internal metainformation such as
- * QOS profiles, cookies, etc..
- */
-#define DLT_JUNIPER_PPPOE       167
-#define DLT_JUNIPER_PPPOE_ATM   168
-
-#define DLT_GPRS_LLC		169	/* GPRS LLC */
-#define DLT_GPF_T		170	/* GPF-T (ITU-T G.7041/Y.1303) */
-#define DLT_GPF_F		171	/* GPF-F (ITU-T G.7041/Y.1303) */
-
-/*
- * Requested by Oolan Zimmer <oz@gcom.com> for use in Gcom's T1/E1 line
- * monitoring equipment.
- */
-#define DLT_GCOM_T1E1		172
-#define DLT_GCOM_SERIAL		173
-
-/*
- * Juniper-private data link type, as per request from
- * Hannes Gredler <hannes@juniper.net>.  The DLT_ is used
- * for internal communication to Physical Interface Cards (PIC)
- */
-#define DLT_JUNIPER_PIC_PEER    174
-
-/*
- * Link types requested by Gregor Maier <gregor@endace.com> of Endace
- * Measurement Systems.  They add an ERF header (see
- * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of
- * the link-layer header.
- */
-#define DLT_ERF_ETH		175	/* Ethernet */
-#define DLT_ERF_POS		176	/* Packet-over-SONET */
-
-/*
- * Requested by Daniele Orlandi <daniele@orlandi.com> for raw LAPD
- * for vISDN (http://www.orlandi.com/visdn/).  Its link-layer header
- * includes additional information before the LAPD header, so it's
- * not necessarily a generic LAPD header.
- */
-#define DLT_LINUX_LAPD		177
-
-/*
- * Juniper-private data link type, as per request from
- * Hannes Gredler <hannes@juniper.net>. 
- * The DLT_ are used for prepending meta-information
- * like interface index, interface name
- * before standard Ethernet, PPP, Frelay & C-HDLC Frames
- */
-#define DLT_JUNIPER_ETHER       178
-#define DLT_JUNIPER_PPP         179
-#define DLT_JUNIPER_FRELAY      180
-#define DLT_JUNIPER_CHDLC       181
-
-/*
- * Multi Link Frame Relay (FRF.16)
- */
-#define DLT_MFR                 182
-
-/*
- * Juniper-private data link type, as per request from
- * Hannes Gredler <hannes@juniper.net>. 
- * The DLT_ is used for internal communication with a
- * voice Adapter Card (PIC)
- */
-#define DLT_JUNIPER_VP          183
-
-/*
- * Arinc 429 frames.
- * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
- * Every frame contains a 32bit A429 label.
- * More documentation on Arinc 429 can be found at
- * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
- */
-#define DLT_A429                184
-
-/*
- * Arinc 653 Interpartition Communication messages.
- * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
- * Please refer to the A653-1 standard for more information.
- */
-#define DLT_A653_ICM            185
-
-/*
- * USB packets, beginning with a USB setup header; requested by
- * Paolo Abeni <paolo.abeni@email.it>.
- */
-#define DLT_USB			186
-
-/*
- * Bluetooth HCI UART transport layer (part H:4); requested by
- * Paolo Abeni.
- */
-#define DLT_BLUETOOTH_HCI_H4	187
-
-/*
- * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz
- * <cruz_petagay@bah.com>.
- */
-#define DLT_IEEE802_16_MAC_CPS	188
-
-/*
- * USB packets, beginning with a Linux USB header; requested by
- * Paolo Abeni <paolo.abeni@email.it>.
- */
-#define DLT_USB_LINUX		189
-
-/*
- * Controller Area Network (CAN) v. 2.0B packets.
- * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
- * Used to dump CAN packets coming from a CAN Vector board.
- * More documentation on the CAN v2.0B frames can be found at
- * http://www.can-cia.org/downloads/?269
- */
-#define DLT_CAN20B              190
-
-/*
- * IEEE 802.15.4, with address fields padded, as is done by Linux
- * drivers; requested by Juergen Schimmer.
- */
-#define DLT_IEEE802_15_4_LINUX	191
-
-/*
- * Per Packet Information encapsulated packets.
- * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
- */
-#define DLT_PPI			192
-
-/*
- * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header;
- * requested by Charles Clancy.
- */
-#define DLT_IEEE802_16_MAC_CPS_RADIO	193
-
-/*
- * Juniper-private data link type, as per request from
- * Hannes Gredler <hannes@juniper.net>. 
- * The DLT_ is used for internal communication with a
- * integrated service module (ISM).
- */
-#define DLT_JUNIPER_ISM         194
-
-/*
- * IEEE 802.15.4, exactly as it appears in the spec (no padding, no
- * nothing); requested by Mikko Saarnivala <mikko.saarnivala@sensinode.com>.
- */
-#define DLT_IEEE802_15_4	195
-
-/*
- * Various link-layer types, with a pseudo-header, for SITA
- * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com).
- */
-#define DLT_SITA		196
-
-/*
- * Various link-layer types, with a pseudo-header, for Endace DAG cards;
- * encapsulates Endace ERF records.  Requested by Stephen Donnelly
- * <stephen@endace.com>.
- */
-#define DLT_ERF			197
-
-/*
- * Special header prepended to Ethernet packets when capturing from a
- * u10 Networks board.  Requested by Phil Mulholland
- * <phil@u10networks.com>.
- */
-#define DLT_RAIF1		198
-
-/*
- * IPMB packet for IPMI, beginning with the I2C slave address, followed
- * by the netFn and LUN, etc..  Requested by Chanthy Toeung
- * <chanthy.toeung@ca.kontron.com>.
- */
-#define DLT_IPMB		199
-
-/*
- * Juniper-private data link type, as per request from
- * Hannes Gredler <hannes@juniper.net>. 
- * The DLT_ is used for capturing data on a secure tunnel interface.
- */
-#define DLT_JUNIPER_ST          200
-
-/*
- * Bluetooth HCI UART transport layer (part H:4), with pseudo-header
- * that includes direction information; requested by Paolo Abeni.
- */
-#define DLT_BLUETOOTH_HCI_H4_WITH_PHDR	201
-
-/*
- * AX.25 packet with a 1-byte KISS header; see
- *
- *	http://www.ax25.net/kiss.htm
- *
- * as per Richard Stearn <richard@rns-stearn.demon.co.uk>.
- */
-#define DLT_AX25_KISS		202
-
-/*
- * LAPD packets from an ISDN channel, starting with the address field,
- * with no pseudo-header.
- * Requested by Varuna De Silva <varunax@gmail.com>.
- */
-#define DLT_LAPD		203
-
-/*
- * Variants of various link-layer headers, with a one-byte direction
- * pseudo-header prepended - zero means "received by this host",
- * non-zero (any non-zero value) means "sent by this host" - as per
- * Will Barker <w.barker@zen.co.uk>.
- */
-#define DLT_PPP_WITH_DIR	204	/* PPP - don't confuse with DLT_PPP_WITH_DIRECTION */
-#define DLT_C_HDLC_WITH_DIR	205	/* Cisco HDLC */
-#define DLT_FRELAY_WITH_DIR	206	/* Frame Relay */
-#define DLT_LAPB_WITH_DIR	207	/* LAPB */
-
-/*
- * 208 is reserved for an as-yet-unspecified proprietary link-layer
- * type, as requested by Will Barker.
- */
-
-/*
- * IPMB with a Linux-specific pseudo-header; as requested by Alexey Neyman
- * <avn@pigeonpoint.com>.
- */
-#define DLT_IPMB_LINUX		209
-
-/*
- * FlexRay automotive bus - http://www.flexray.com/ - as requested
- * by Hannes Kaelber <hannes.kaelber@x2e.de>.
- */
-#define DLT_FLEXRAY		210
-
-/*
- * Media Oriented Systems Transport (MOST) bus for multimedia
- * transport - http://www.mostcooperation.com/ - as requested
- * by Hannes Kaelber <hannes.kaelber@x2e.de>.
- */
-#define DLT_MOST		211
-
-/*
- * Local Interconnect Network (LIN) bus for vehicle networks -
- * http://www.lin-subbus.org/ - as requested by Hannes Kaelber
- * <hannes.kaelber@x2e.de>.
- */
-#define DLT_LIN			212
-
-/*
- * X2E-private data link type used for serial line capture,
- * as requested by Hannes Kaelber <hannes.kaelber@x2e.de>.
- */
-#define DLT_X2E_SERIAL		213
-
-/*
- * X2E-private data link type used for the Xoraya data logger
- * family, as requested by Hannes Kaelber <hannes.kaelber@x2e.de>.
- */
-#define DLT_X2E_XORAYA		214
-
-/*
- * IEEE 802.15.4, exactly as it appears in the spec (no padding, no
- * nothing), but with the PHY-level data for non-ASK PHYs (4 octets
- * of 0 as preamble, one octet of SFD, one octet of frame length+
- * reserved bit, and then the MAC-layer data, starting with the
- * frame control field).
- *
- * Requested by Max Filippov <jcmvbkbc@gmail.com>.
- */
-#define DLT_IEEE802_15_4_NONASK_PHY	215
-
-
-/*
- * DLT and savefile link type values are split into a class and
- * a member of that class.  A class value of 0 indicates a regular
- * DLT_/LINKTYPE_ value.
- */
-#define DLT_CLASS(x)		((x) & 0x03ff0000)
-
-/*
- * NetBSD-specific generic "raw" link type.  The class value indicates
- * that this is the generic raw type, and the lower 16 bits are the
- * address family we're dealing with.  Those values are NetBSD-specific;
- * do not assume that they correspond to AF_ values for your operating
- * system.
- */
-#define	DLT_CLASS_NETBSD_RAWAF	0x02240000
-#define	DLT_NETBSD_RAWAF(af)	(DLT_CLASS_NETBSD_RAWAF | (af))
-#define	DLT_NETBSD_RAWAF_AF(x)	((x) & 0x0000ffff)
-#define	DLT_IS_NETBSD_RAWAF(x)	(DLT_CLASS(x) == DLT_CLASS_NETBSD_RAWAF)
-
-
-/*
- * The instruction encodings.
- */
-/* instruction classes */
-#define BPF_CLASS(code) ((code) & 0x07)
-#define		BPF_LD		0x00
-#define		BPF_LDX		0x01
-#define		BPF_ST		0x02
-#define		BPF_STX		0x03
-#define		BPF_ALU		0x04
-#define		BPF_JMP		0x05
-#define		BPF_RET		0x06
-#define		BPF_MISC	0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code)	((code) & 0x18)
-#define		BPF_W		0x00
-#define		BPF_H		0x08
-#define		BPF_B		0x10
-#define BPF_MODE(code)	((code) & 0xe0)
-#define		BPF_IMM 	0x00
-#define		BPF_ABS		0x20
-#define		BPF_IND		0x40
-#define		BPF_MEM		0x60
-#define		BPF_LEN		0x80
-#define		BPF_MSH		0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code)	((code) & 0xf0)
-#define		BPF_ADD		0x00
-#define		BPF_SUB		0x10
-#define		BPF_MUL		0x20
-#define		BPF_DIV		0x30
-#define		BPF_OR		0x40
-#define		BPF_AND		0x50
-#define		BPF_LSH		0x60
-#define		BPF_RSH		0x70
-#define		BPF_NEG		0x80
-#define		BPF_JA		0x00
-#define		BPF_JEQ		0x10
-#define		BPF_JGT		0x20
-#define		BPF_JGE		0x30
-#define		BPF_JSET	0x40
-#define BPF_SRC(code)	((code) & 0x08)
-#define		BPF_K		0x00
-#define		BPF_X		0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code)	((code) & 0x18)
-#define		BPF_A		0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define		BPF_TAX		0x00
-#define		BPF_TXA		0x80
-
-/*
- * The instruction data structure.
- */
-struct bpf_insn {
-	u_short	code;
-	u_char 	jt;
-	u_char 	jf;
-	bpf_u_int32 k;
-};
-
-/*
- * Macros for insn array initializers.
- */
-#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
-#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
-
-#if __STDC__ || defined(__cplusplus)
-extern int bpf_validate(const struct bpf_insn *, int);
-extern u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int);
-#else
-extern int bpf_validate();
-extern u_int bpf_filter();
-#endif
-
-/*
- * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
- */
-#define BPF_MEMWORDS 16
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/namedb.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/namedb.h
deleted file mode 100644
index 9002c7509..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/namedb.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright (c) 1994, 1996
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the Computer Systems
- *	Engineering Group at Lawrence Berkeley Laboratory.
- * 4. Neither the name of the University nor of the Laboratory may be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap/namedb.h,v 1.1 2006/10/04 18:09:22 guy Exp $ (LBL)
- */
-
-#ifndef lib_pcap_namedb_h
-#define lib_pcap_namedb_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * As returned by the pcap_next_etherent()
- * XXX this stuff doesn't belong in this interface, but this
- * library already must do name to address translation, so
- * on systems that don't have support for /etc/ethers, we
- * export these hooks since they'll
- */
-struct pcap_etherent {
-	u_char addr[6];
-	char name[122];
-};
-#ifndef PCAP_ETHERS_FILE
-#define PCAP_ETHERS_FILE "/etc/ethers"
-#endif
-struct	pcap_etherent *pcap_next_etherent(FILE *);
-u_char *pcap_ether_hostton(const char*);
-u_char *pcap_ether_aton(const char *);
-
-bpf_u_int32 **pcap_nametoaddr(const char *);
-#ifdef INET6
-struct addrinfo *pcap_nametoaddrinfo(const char *);
-#endif
-bpf_u_int32 pcap_nametonetaddr(const char *);
-
-int	pcap_nametoport(const char *, int *, int *);
-int	pcap_nametoportrange(const char *, int *, int *, int *);
-int	pcap_nametoproto(const char *);
-int	pcap_nametoeproto(const char *);
-int	pcap_nametollc(const char *);
-/*
- * If a protocol is unknown, PROTO_UNDEF is returned.
- * Also, pcap_nametoport() returns the protocol along with the port number.
- * If there are ambiguous entried in /etc/services (i.e. domain
- * can be either tcp or udp) PROTO_UNDEF is returned.
- */
-#define PROTO_UNDEF		-1
-
-/* XXX move these to pcap-int.h? */
-int __pcap_atodn(const char *, bpf_u_int32 *);
-int __pcap_atoin(const char *, bpf_u_int32 *);
-u_short	__pcap_nametodnaddr(const char *);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/pcap.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/pcap.h
deleted file mode 100644
index ad8fc40ac..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/pcap.h
+++ /dev/null
@@ -1,407 +0,0 @@
-/* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */
-/*
- * Copyright (c) 1993, 1994, 1995, 1996, 1997
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the Computer Systems
- *	Engineering Group at Lawrence Berkeley Laboratory.
- * 4. Neither the name of the University nor of the Laboratory may be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap/pcap.h,v 1.4.2.11 2008-10-06 15:38:39 gianluca Exp $ (LBL)
- */
-
-#ifndef lib_pcap_pcap_h
-#define lib_pcap_pcap_h
-
-#if defined(WIN32)
-  #include <pcap-stdinc.h>
-#elif defined(MSDOS)
-  #include <sys/types.h>
-  #include <sys/socket.h>  /* u_int, u_char etc. */
-#else /* UN*X */
-  #include <sys/types.h>
-  #include <sys/time.h>
-#endif /* WIN32/MSDOS/UN*X */
-
-#ifndef PCAP_DONT_INCLUDE_PCAP_BPF_H
-#include <pcap/bpf.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef HAVE_REMOTE
-	// We have to define the SOCKET here, although it has been defined in sockutils.h
-	// This is to avoid the distribution of the 'sockutils.h' file around
-	// (for example in the WinPcap developer's pack)
-	#ifndef SOCKET
-		#ifdef WIN32
-			#define SOCKET unsigned int
-		#else
-			#define SOCKET int
-		#endif
-	#endif
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define PCAP_VERSION_MAJOR 2
-#define PCAP_VERSION_MINOR 4
-
-#define PCAP_ERRBUF_SIZE 256
-
-/*
- * Compatibility for systems that have a bpf.h that
- * predates the bpf typedefs for 64-bit support.
- */
-#if BPF_RELEASE - 0 < 199406
-typedef	int bpf_int32;
-typedef	u_int bpf_u_int32;
-#endif
-
-typedef struct pcap pcap_t;
-typedef struct pcap_dumper pcap_dumper_t;
-typedef struct pcap_if pcap_if_t;
-typedef struct pcap_addr pcap_addr_t;
-
-/*
- * The first record in the file contains saved values for some
- * of the flags used in the printout phases of tcpdump.
- * Many fields here are 32 bit ints so compilers won't insert unwanted
- * padding; these files need to be interchangeable across architectures.
- *
- * Do not change the layout of this structure, in any way (this includes
- * changes that only affect the length of fields in this structure).
- *
- * Also, do not change the interpretation of any of the members of this
- * structure, in any way (this includes using values other than
- * LINKTYPE_ values, as defined in "savefile.c", in the "linktype"
- * field).
- *
- * Instead:
- *
- *	introduce a new structure for the new format, if the layout
- *	of the structure changed;
- *
- *	send mail to "tcpdump-workers@lists.tcpdump.org", requesting
- *	a new magic number for your new capture file format, and, when
- *	you get the new magic number, put it in "savefile.c";
- *
- *	use that magic number for save files with the changed file
- *	header;
- *
- *	make the code in "savefile.c" capable of reading files with
- *	the old file header as well as files with the new file header
- *	(using the magic number to determine the header format).
- *
- * Then supply the changes as a patch at
- *
- *	http://sourceforge.net/projects/libpcap/
- *
- * so that future versions of libpcap and programs that use it (such as
- * tcpdump) will be able to read your new capture file format.
- */
-struct pcap_file_header {
-	bpf_u_int32 magic;
-	u_short version_major;
-	u_short version_minor;
-	bpf_int32 thiszone;	/* gmt to local correction */
-	bpf_u_int32 sigfigs;	/* accuracy of timestamps */
-	bpf_u_int32 snaplen;	/* max length saved portion of each pkt */
-	bpf_u_int32 linktype;	/* data link type (LINKTYPE_*) */
-};
-
-/*
- * Macros for the value returned by pcap_datalink_ext().
- * 
- * If LT_FCS_LENGTH_PRESENT(x) is true, the LT_FCS_LENGTH(x) macro
- * gives the FCS length of packets in the capture.
- */
-#define LT_FCS_LENGTH_PRESENT(x)	((x) & 0x04000000)
-#define LT_FCS_LENGTH(x)		(((x) & 0xF0000000) >> 28)
-#define LT_FCS_DATALINK_EXT(x)		((((x) & 0xF) << 28) | 0x04000000)
-
-typedef enum {
-       PCAP_D_INOUT = 0,
-       PCAP_D_IN,
-       PCAP_D_OUT
-} pcap_direction_t;
-
-/*
- * Generic per-packet information, as supplied by libpcap.
- *
- * The time stamp can and should be a "struct timeval", regardless of
- * whether your system supports 32-bit tv_sec in "struct timeval",
- * 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit
- * and 64-bit applications.  The on-disk format of savefiles uses 32-bit
- * tv_sec (and tv_usec); this structure is irrelevant to that.  32-bit
- * and 64-bit versions of libpcap, even if they're on the same platform,
- * should supply the appropriate version of "struct timeval", even if
- * that's not what the underlying packet capture mechanism supplies.
- */
-struct pcap_pkthdr {
-	struct timeval ts;	/* time stamp */
-	bpf_u_int32 caplen;	/* length of portion present */
-	bpf_u_int32 len;	/* length this packet (off wire) */
-};
-
-/*
- * As returned by the pcap_stats()
- */
-struct pcap_stat {
-	u_int ps_recv;		/* number of packets received */
-	u_int ps_drop;		/* number of packets dropped */
-	u_int ps_ifdrop;	/* drops by interface XXX not yet supported */
-#ifdef HAVE_REMOTE
-	u_int ps_capt;		/* number of packets that are received by the application; please get rid off the Win32 ifdef */
-	u_int ps_sent;		/* number of packets sent by the server on the network */
-	u_int ps_netdrop;	/* number of packets lost on the network */
-#endif /* HAVE_REMOTE */
-};
-
-#ifdef MSDOS
-/*
- * As returned by the pcap_stats_ex()
- */
-struct pcap_stat_ex {
-       u_long  rx_packets;        /* total packets received       */
-       u_long  tx_packets;        /* total packets transmitted    */
-       u_long  rx_bytes;          /* total bytes received         */
-       u_long  tx_bytes;          /* total bytes transmitted      */
-       u_long  rx_errors;         /* bad packets received         */
-       u_long  tx_errors;         /* packet transmit problems     */
-       u_long  rx_dropped;        /* no space in Rx buffers       */
-       u_long  tx_dropped;        /* no space available for Tx    */
-       u_long  multicast;         /* multicast packets received   */
-       u_long  collisions;
-
-       /* detailed rx_errors: */
-       u_long  rx_length_errors;
-       u_long  rx_over_errors;    /* receiver ring buff overflow  */
-       u_long  rx_crc_errors;     /* recv'd pkt with crc error    */
-       u_long  rx_frame_errors;   /* recv'd frame alignment error */
-       u_long  rx_fifo_errors;    /* recv'r fifo overrun          */
-       u_long  rx_missed_errors;  /* recv'r missed packet         */
-
-       /* detailed tx_errors */
-       u_long  tx_aborted_errors;
-       u_long  tx_carrier_errors;
-       u_long  tx_fifo_errors;
-       u_long  tx_heartbeat_errors;
-       u_long  tx_window_errors;
-     };
-#endif
-
-/*
- * Item in a list of interfaces.
- */
-struct pcap_if {
-	struct pcap_if *next;
-	char *name;		/* name to hand to "pcap_open_live()" */
-	char *description;	/* textual description of interface, or NULL */
-	struct pcap_addr *addresses;
-	bpf_u_int32 flags;	/* PCAP_IF_ interface flags */
-};
-
-#define PCAP_IF_LOOPBACK	0x00000001	/* interface is loopback */
-
-/*
- * Representation of an interface address.
- */
-struct pcap_addr {
-	struct pcap_addr *next;
-	struct sockaddr *addr;		/* address */
-	struct sockaddr *netmask;	/* netmask for that address */
-	struct sockaddr *broadaddr;	/* broadcast address for that address */
-	struct sockaddr *dstaddr;	/* P2P destination address for that address */
-};
-
-typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *,
-			     const u_char *);
-
-/*
- * Error codes for the pcap API.
- * These will all be negative, so you can check for the success or
- * failure of a call that returns these codes by checking for a
- * negative value.
- */
-#define PCAP_ERROR			-1	/* generic error code */
-#define PCAP_ERROR_BREAK		-2	/* loop terminated by pcap_breakloop */
-#define PCAP_ERROR_NOT_ACTIVATED	-3	/* the capture needs to be activated */
-#define PCAP_ERROR_ACTIVATED		-4	/* the operation can't be performed on already activated captures */
-#define PCAP_ERROR_NO_SUCH_DEVICE	-5	/* no such device exists */
-#define PCAP_ERROR_RFMON_NOTSUP		-6	/* this device doesn't support rfmon (monitor) mode */
-#define PCAP_ERROR_NOT_RFMON		-7	/* operation supported only in monitor mode */
-#define PCAP_ERROR_PERM_DENIED		-8	/* no permission to open the device */
-#define PCAP_ERROR_IFACE_NOT_UP		-9	/* interface isn't up */
-
-/*
- * Warning codes for the pcap API.
- * These will all be positive and non-zero, so they won't look like
- * errors.
- */
-#define PCAP_WARNING			1	/* generic warning code */
-#define PCAP_WARNING_PROMISC_NOTSUP	2	/* this device doesn't support promiscuous mode */
-
-char	*pcap_lookupdev(char *);
-int	pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *);
-
-pcap_t	*pcap_create(const char *, char *);
-int	pcap_set_snaplen(pcap_t *, int);
-int	pcap_set_promisc(pcap_t *, int);
-int	pcap_can_set_rfmon(pcap_t *);
-int	pcap_set_rfmon(pcap_t *, int);
-int	pcap_set_timeout(pcap_t *, int);
-int	pcap_set_buffer_size(pcap_t *, int);
-int	pcap_activate(pcap_t *);
-
-pcap_t	*pcap_open_live(const char *, int, int, int, char *);
-pcap_t	*pcap_open_dead(int, int);
-pcap_t	*pcap_open_offline(const char *, char *);
-#if defined(WIN32)
-pcap_t  *pcap_hopen_offline(intptr_t, char *);
-#if !defined(LIBPCAP_EXPORTS)
-#define pcap_fopen_offline(f,b) \
-	pcap_hopen_offline(_get_osfhandle(_fileno(f)), b)
-#else /*LIBPCAP_EXPORTS*/
-static pcap_t *pcap_fopen_offline(FILE *, char *);
-#endif
-#else /*WIN32*/
-pcap_t	*pcap_fopen_offline(FILE *, char *);
-#endif /*WIN32*/
-
-void	pcap_close(pcap_t *);
-int	pcap_loop(pcap_t *, int, pcap_handler, u_char *);
-int	pcap_dispatch(pcap_t *, int, pcap_handler, u_char *);
-const u_char*
-	pcap_next(pcap_t *, struct pcap_pkthdr *);
-int 	pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **);
-void	pcap_breakloop(pcap_t *);
-int	pcap_stats(pcap_t *, struct pcap_stat *);
-int	pcap_setfilter(pcap_t *, struct bpf_program *);
-int 	pcap_setdirection(pcap_t *, pcap_direction_t);
-int	pcap_getnonblock(pcap_t *, char *);
-int	pcap_setnonblock(pcap_t *, int, char *);
-int	pcap_inject(pcap_t *, const void *, size_t);
-int	pcap_sendpacket(pcap_t *, const u_char *, int);
-const char *pcap_statustostr(int);
-const char *pcap_strerror(int);
-char	*pcap_geterr(pcap_t *);
-void	pcap_perror(pcap_t *, char *);
-int	pcap_compile(pcap_t *, struct bpf_program *, const char *, int,
-	    bpf_u_int32);
-int	pcap_compile_nopcap(int, int, struct bpf_program *,
-	    const char *, int, bpf_u_int32);
-void	pcap_freecode(struct bpf_program *);
-int	pcap_offline_filter(struct bpf_program *, const struct pcap_pkthdr *,
-	    const u_char *);
-int	pcap_datalink(pcap_t *);
-int	pcap_datalink_ext(pcap_t *);
-int	pcap_list_datalinks(pcap_t *, int **);
-int	pcap_set_datalink(pcap_t *, int);
-void	pcap_free_datalinks(int *);
-int	pcap_datalink_name_to_val(const char *);
-const char *pcap_datalink_val_to_name(int);
-const char *pcap_datalink_val_to_description(int);
-int	pcap_snapshot(pcap_t *);
-int	pcap_is_swapped(pcap_t *);
-int	pcap_major_version(pcap_t *);
-int	pcap_minor_version(pcap_t *);
-
-/* XXX */
-FILE	*pcap_file(pcap_t *);
-int	pcap_fileno(pcap_t *);
-
-pcap_dumper_t *pcap_dump_open(pcap_t *, const char *);
-pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp);
-FILE	*pcap_dump_file(pcap_dumper_t *);
-long	pcap_dump_ftell(pcap_dumper_t *);
-int	pcap_dump_flush(pcap_dumper_t *);
-void	pcap_dump_close(pcap_dumper_t *);
-void	pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *);
-
-int	pcap_findalldevs(pcap_if_t **, char *);
-void	pcap_freealldevs(pcap_if_t *);
-
-const char *pcap_lib_version(void);
-
-/* XXX this guy lives in the bpf tree */
-u_int	bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int);
-int	bpf_validate(const struct bpf_insn *f, int len);
-char	*bpf_image(const struct bpf_insn *, int);
-void	bpf_dump(const struct bpf_program *, int);
-
-#if defined(WIN32)
-
-/*
- * Win32 definitions
- */
-
-int pcap_setbuff(pcap_t *p, int dim);
-int pcap_setmode(pcap_t *p, int mode);
-int pcap_setmintocopy(pcap_t *p, int size);
-
-#ifdef WPCAP
-/* Include file with the wpcap-specific extensions */
-#include <Win32-Extensions.h>
-#endif /* WPCAP */
-
-#define MODE_CAPT 0
-#define MODE_STAT 1
-#define MODE_MON 2
-
-#elif defined(MSDOS)
-
-/*
- * MS-DOS definitions
- */
-
-int  pcap_stats_ex (pcap_t *, struct pcap_stat_ex *);
-void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait);
-u_long pcap_mac_packets (void);
-
-#else /* UN*X */
-
-/*
- * UN*X definitions
- */
-
-int	pcap_get_selectable_fd(pcap_t *);
-
-#endif /* WIN32/MSDOS/UN*X */
-
-#ifdef HAVE_REMOTE
-/* Includes most of the public stuff that is needed for the remote capture */
-#include <remote-ext.h>
-#endif	 /* HAVE_REMOTE */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/sll.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/sll.h
deleted file mode 100644
index e9d5452af..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/sll.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*-
- * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from the Stanford/CMU enet packet filter,
- * (net/enet.c) distributed as part of 4.3BSD, and code contributed
- * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
- * Berkeley Laboratory.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by the University of
- *      California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap/sll.h,v 1.2.2.1 2008-05-30 01:36:06 guy Exp $ (LBL)
- */
-
-/*
- * For captures on Linux cooked sockets, we construct a fake header
- * that includes:
- *
- *	a 2-byte "packet type" which is one of:
- *
- *		LINUX_SLL_HOST		packet was sent to us
- *		LINUX_SLL_BROADCAST	packet was broadcast
- *		LINUX_SLL_MULTICAST	packet was multicast
- *		LINUX_SLL_OTHERHOST	packet was sent to somebody else
- *		LINUX_SLL_OUTGOING	packet was sent *by* us;
- *
- *	a 2-byte Ethernet protocol field;
- *
- *	a 2-byte link-layer type;
- *
- *	a 2-byte link-layer address length;
- *
- *	an 8-byte source link-layer address, whose actual length is
- *	specified by the previous value.
- *
- * All fields except for the link-layer address are in network byte order.
- *
- * DO NOT change the layout of this structure, or change any of the
- * LINUX_SLL_ values below.  If you must change the link-layer header
- * for a "cooked" Linux capture, introduce a new DLT_ type (ask
- * "tcpdump-workers@lists.tcpdump.org" for one, so that you don't give it
- * a value that collides with a value already being used), and use the
- * new header in captures of that type, so that programs that can
- * handle DLT_LINUX_SLL captures will continue to handle them correctly
- * without any change, and so that capture files with different headers
- * can be told apart and programs that read them can dissect the
- * packets in them.
- */
-
-#ifndef lib_pcap_sll_h
-#define lib_pcap_sll_h
-
-/*
- * A DLT_LINUX_SLL fake link-layer header.
- */
-#define SLL_HDR_LEN	16		/* total header length */
-#define SLL_ADDRLEN	8		/* length of address field */
-
-struct sll_header {
-	u_int16_t sll_pkttype;		/* packet type */
-	u_int16_t sll_hatype;		/* link-layer address type */
-	u_int16_t sll_halen;		/* link-layer address length */
-	u_int8_t sll_addr[SLL_ADDRLEN];	/* link-layer address */
-	u_int16_t sll_protocol;		/* protocol */
-};
-
-/*
- * The LINUX_SLL_ values for "sll_pkttype"; these correspond to the
- * PACKET_ values on Linux, but are defined here so that they're
- * available even on systems other than Linux, and so that they
- * don't change even if the PACKET_ values change.
- */
-#define LINUX_SLL_HOST		0
-#define LINUX_SLL_BROADCAST	1
-#define LINUX_SLL_MULTICAST	2
-#define LINUX_SLL_OTHERHOST	3
-#define LINUX_SLL_OUTGOING	4
-
-/*
- * The LINUX_SLL_ values for "sll_protocol"; these correspond to the
- * ETH_P_ values on Linux, but are defined here so that they're
- * available even on systems other than Linux.  We assume, for now,
- * that the ETH_P_ values won't change in Linux; if they do, then:
- *
- *	if we don't translate them in "pcap-linux.c", capture files
- *	won't necessarily be readable if captured on a system that
- *	defines ETH_P_ values that don't match these values;
- *
- *	if we do translate them in "pcap-linux.c", that makes life
- *	unpleasant for the BPF code generator, as the values you test
- *	for in the kernel aren't the values that you test for when
- *	reading a capture file, so the fixup code run on BPF programs
- *	handed to the kernel ends up having to do more work.
- *
- * Add other values here as necessary, for handling packet types that
- * might show up on non-Ethernet, non-802.x networks.  (Not all the ones
- * in the Linux "if_ether.h" will, I suspect, actually show up in
- * captures.)
- */
-#define LINUX_SLL_P_802_3	0x0001	/* Novell 802.3 frames without 802.2 LLC header */
-#define LINUX_SLL_P_802_2	0x0004	/* 802.2 frames (not D/I/X Ethernet) */
-
-#endif
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/usb.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/usb.h
deleted file mode 100644
index adcd19c05..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/usb.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (c) 2006 Paolo Abeni (Italy)
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote 
- * products derived from this software without specific prior written 
- * permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Basic USB data struct
- * By Paolo Abeni <paolo.abeni@email.it>
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap/usb.h,v 1.6 2007/09/22 02:06:08 guy Exp $
- */
- 
-#ifndef _PCAP_USB_STRUCTS_H__
-#define _PCAP_USB_STRUCTS_H__
-
-/* 
- * possible transfer mode
- */
-#define URB_TRANSFER_IN   0x80
-#define URB_ISOCHRONOUS   0x0
-#define URB_INTERRUPT     0x1
-#define URB_CONTROL       0x2
-#define URB_BULK          0x3
-
-/*
- * possible event type
- */
-#define URB_SUBMIT        'S'
-#define URB_COMPLETE      'C'
-#define URB_ERROR         'E'
-
-/*
- * USB setup header as defined in USB specification.
- * Appears at the front of each packet in DLT_USB captures.
- */
-typedef struct _usb_setup {
-	u_int8_t bmRequestType;
-	u_int8_t bRequest;
-	u_int16_t wValue;
-	u_int16_t wIndex;
-	u_int16_t wLength;
-} pcap_usb_setup;
-
-
-/*
- * Header prepended by linux kernel to each event.
- * Appears at the front of each packet in DLT_USB_LINUX captures.
- */
-typedef struct _usb_header {
-	u_int64_t id;
-	u_int8_t event_type;
-	u_int8_t transfer_type;
-	u_int8_t endpoint_number;
-	u_int8_t device_address;
-	u_int16_t bus_id;
-	char setup_flag;/*if !=0 the urb setup header is not present*/
-	char data_flag; /*if !=0 no urb data is present*/
-	int64_t ts_sec;
-	int32_t ts_usec;
-	int32_t status;
-	u_int32_t urb_len;
-	u_int32_t data_len; /* amount of urb data really present in this event*/
-	pcap_usb_setup setup;
-} pcap_usb_header;
-
-
-#endif
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/vlan.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/vlan.h
deleted file mode 100644
index b0cb7949b..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/pcap/vlan.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*-
- * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by the University of
- *      California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header: /tcpdump/master/libpcap/pcap/vlan.h,v 1.1.2.2 2008-08-06 07:45:59 guy Exp $
- */
-
-#ifndef lib_pcap_vlan_h
-#define lib_pcap_vlan_h
-
-struct vlan_tag {
-	u_int16_t	vlan_tpid;		/* ETH_P_8021Q */
-	u_int16_t	vlan_tci;		/* VLAN TCI */
-};
-
-#define VLAN_TAG_LEN	4
-
-#endif
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/remote-ext.h b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/remote-ext.h
deleted file mode 100644
index 35a2fff6c..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/remote-ext.h
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * Copyright (c) 2002 - 2003
- * NetGroup, Politecnico di Torino (Italy)
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without 
- * modification, are permitted provided that the following conditions 
- * are met:
- * 
- * 1. Redistributions of source code must retain the above copyright 
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright 
- * notice, this list of conditions and the following disclaimer in the 
- * documentation and/or other materials provided with the distribution. 
- * 3. Neither the name of the Politecnico di Torino nor the names of its 
- * contributors may be used to endorse or promote products derived from 
- * this software without specific prior written permission. 
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * 
- */
-
-
-#ifndef __REMOTE_EXT_H__
-#define __REMOTE_EXT_H__
-
-
-#ifndef HAVE_REMOTE
-#error Please do not include this file directly. Just define HAVE_REMOTE and then include pcap.h
-#endif
-
-// Definition for Microsoft Visual Studio
-#if _MSC_VER > 1000
-#pragma once
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*!
-	\file remote-ext.h
-
-	The goal of this file it to include most of the new definitions that should be
-	placed into the pcap.h file.
-
-	It includes all new definitions (structures and functions like pcap_open().
-    Some of the functions are not really a remote feature, but, right now, 
-	they are placed here.
-*/
-
-
-
-// All this stuff is public
-/*! \addtogroup remote_struct
-	\{
-*/
-
-
-
-
-/*!
-	\brief Defines the maximum buffer size in which address, port, interface names are kept.
-
-	In case the adapter name or such is larger than this value, it is truncated.
-	This is not used by the user; however it must be aware that an hostname / interface
-	name longer than this value will be truncated.
-*/
-#define PCAP_BUF_SIZE 1024
-
-
-/*! \addtogroup remote_source_ID
-	\{
-*/
-
-
-/*!
-	\brief Internal representation of the type of source in use (file, 
-	remote/local interface).
-
-	This indicates a file, i.e. the user want to open a capture from a local file.
-*/
-#define PCAP_SRC_FILE 2
-/*!
-	\brief Internal representation of the type of source in use (file, 
-	remote/local interface).
-
-	This indicates a local interface, i.e. the user want to open a capture from 
-	a local interface. This does not involve the RPCAP protocol.
-*/
-#define PCAP_SRC_IFLOCAL 3
-/*!
-	\brief Internal representation of the type of source in use (file, 
-	remote/local interface).
-
-	This indicates a remote interface, i.e. the user want to open a capture from 
-	an interface on a remote host. This does involve the RPCAP protocol.
-*/
-#define PCAP_SRC_IFREMOTE 4
-
-/*!
-	\}
-*/
-
-
-
-/*! \addtogroup remote_source_string
-
-	The formats allowed by the pcap_open() are the following:
-	- file://path_and_filename [opens a local file]
-	- rpcap://devicename [opens the selected device devices available on the local host, without using the RPCAP protocol]
-	- rpcap://host/devicename [opens the selected device available on a remote host]
-	- rpcap://host:port/devicename [opens the selected device available on a remote host, using a non-standard port for RPCAP]
-	- adaptername [to open a local adapter; kept for compability, but it is strongly discouraged]
-	- (NULL) [to open the first local adapter; kept for compability, but it is strongly discouraged]
-
-	The formats allowed by the pcap_findalldevs_ex() are the following:
-	- file://folder/ [lists all the files in the given folder]
-	- rpcap:// [lists all local adapters]
-	- rpcap://host:port/ [lists the devices available on a remote host]
-
-	Referring to the 'host' and 'port' paramters, they can be either numeric or literal. Since
-	IPv6 is fully supported, these are the allowed formats:
-
-	- host (literal): e.g. host.foo.bar
-	- host (numeric IPv4): e.g. 10.11.12.13
-	- host (numeric IPv4, IPv6 style): e.g. [10.11.12.13]
-	- host (numeric IPv6): e.g. [1:2:3::4]
-	- port: can be either numeric (e.g. '80') or literal (e.g. 'http')
-
-	Here you find some allowed examples:
-	- rpcap://host.foo.bar/devicename [everything literal, no port number]
-	- rpcap://host.foo.bar:1234/devicename [everything literal, with port number]
-	- rpcap://10.11.12.13/devicename [IPv4 numeric, no port number]
-	- rpcap://10.11.12.13:1234/devicename [IPv4 numeric, with port number]
-	- rpcap://[10.11.12.13]:1234/devicename [IPv4 numeric with IPv6 format, with port number]
-	- rpcap://[1:2:3::4]/devicename [IPv6 numeric, no port number]
-	- rpcap://[1:2:3::4]:1234/devicename [IPv6 numeric, with port number]
-	- rpcap://[1:2:3::4]:http/devicename [IPv6 numeric, with literal port number]
-	
-	\{
-*/
-
-
-/*!
-	\brief String that will be used to determine the type of source in use (file,
-	remote/local interface).
-
-	This string will be prepended to the interface name in order to create a string
-	that contains all the information required to open the source.
-
-	This string indicates that the user wants to open a capture from a local file.
-*/
-#define PCAP_SRC_FILE_STRING "file://"
-/*!
-	\brief String that will be used to determine the type of source in use (file,
-	remote/local interface).
-
-	This string will be prepended to the interface name in order to create a string
-	that contains all the information required to open the source.
-
-	This string indicates that the user wants to open a capture from a network interface.
-	This string does not necessarily involve the use of the RPCAP protocol. If the
-	interface required resides on the local host, the RPCAP protocol is not involved
-	and the local functions are used.
-*/
-#define PCAP_SRC_IF_STRING "rpcap://"
-
-/*!
-	\}
-*/
-
-
-
-
-
-/*!
-	\addtogroup remote_open_flags
-	\{
-*/
-
-/*!
-	\brief Defines if the adapter has to go in promiscuous mode.
-
-	It is '1' if you have to open the adapter in promiscuous mode, '0' otherwise.
-	Note that even if this parameter is false, the interface could well be in promiscuous
-	mode for some other reason (for example because another capture process with 
-	promiscuous mode enabled is currently using that interface).
-	On on Linux systems with 2.2 or later kernels (that have the "any" device), this
-	flag does not work on the "any" device; if an argument of "any" is supplied,
-	the 'promisc' flag is ignored.
-*/
-#define PCAP_OPENFLAG_PROMISCUOUS		1
-
-/*!
-	\brief Defines if the data trasfer (in case of a remote
-	capture) has to be done with UDP protocol.
-
-	If it is '1' if you want a UDP data connection, '0' if you want
-	a TCP data connection; control connection is always TCP-based.
-	A UDP connection is much lighter, but it does not guarantee that all
-	the captured packets arrive to the client workstation. Moreover, 
-	it could be harmful in case of network congestion.
-	This flag is meaningless if the source is not a remote interface.
-	In that case, it is simply ignored.
-*/
-#define PCAP_OPENFLAG_DATATX_UDP			2
-
-
-/*!
-	\brief Defines if the remote probe will capture its own generated traffic.
-
-	In case the remote probe uses the same interface to capture traffic and to send
-	data back to the caller, the captured traffic includes the RPCAP traffic as well.
-	If this flag is turned on, the RPCAP traffic is excluded from the capture, so that
-	the trace returned back to the collector is does not include this traffic.
-*/
-#define PCAP_OPENFLAG_NOCAPTURE_RPCAP	4
-
-/*!
-	\brief Defines if the local adapter will capture its own generated traffic.
-
-	This flag tells the underlying capture driver to drop the packets that were sent by itself. 
-	This is usefult when building applications like bridges, that should ignore the traffic
-	they just sent.
-*/
-#define PCAP_OPENFLAG_NOCAPTURE_LOCAL	8
-
-/*!
-	\brief This flag configures the adapter for maximum responsiveness.
-
-	In presence of a large value for nbytes, WinPcap waits for the arrival of several packets before 
-	copying the data to the user. This guarantees a low number of system calls, i.e. lower processor usage, 
-	i.e. better performance, which is good for applications like sniffers. If the user sets the 
-	PCAP_OPENFLAG_MAX_RESPONSIVENESS flag, the capture driver will copy the packets as soon as the application 
-	is ready to receive them. This is suggested for real time applications (like, for example, a bridge) 
-	that need the best responsiveness.*/
-#define PCAP_OPENFLAG_MAX_RESPONSIVENESS	16
-
-/*!
-	\}
-*/
-
-
-/*!
-	\addtogroup remote_samp_methods
-	\{
-*/
-
-/*!
-	\brief No sampling has to be done on the current capture.
-
-	In this case, no sampling algorithms are applied to the current capture.
-*/
-#define PCAP_SAMP_NOSAMP	0
-
-/*!
-	\brief It defines that only 1 out of N packets must be returned to the user.
-
-	In this case, the 'value' field of the 'pcap_samp' structure indicates the
-	number of packets (minus 1) that must be discarded before one packet got accepted.
-	In other words, if 'value = 10', the first packet is returned to the caller, while
-	the following 9 are discarded.
-*/
-#define PCAP_SAMP_1_EVERY_N	1
-
-/*!
-	\brief It defines that we have to return 1 packet every N milliseconds.
-
-	In this case, the 'value' field of the 'pcap_samp' structure indicates the 'waiting
-	time' in milliseconds before one packet got accepted.
-	In other words, if 'value = 10', the first packet is returned to the caller; the next 
-	returned one will be the first packet that arrives when 10ms have elapsed. 
-*/
-#define PCAP_SAMP_FIRST_AFTER_N_MS 2
-
-/*!
-	\}
-*/
-
-
-/*!
-	\addtogroup remote_auth_methods
-	\{
-*/
-
-/*!
-	\brief It defines the NULL authentication.
-
-	This value has to be used within the 'type' member of the pcap_rmtauth structure.
-	The 'NULL' authentication has to be equal to 'zero', so that old applications
-	can just put every field of struct pcap_rmtauth to zero, and it does work.
-*/
-#define RPCAP_RMTAUTH_NULL 0
-/*!
-	\brief It defines the username/password authentication.
-
-	With this type of authentication, the RPCAP protocol will use the username/
-	password provided to authenticate the user on the remote machine. If the
-	authentication is successful (and the user has the right to open network devices)
-	the RPCAP connection will continue; otherwise it will be dropped.
-
-	This value has to be used within the 'type' member of the pcap_rmtauth structure.
-*/
-#define RPCAP_RMTAUTH_PWD 1
-
-/*!
-	\}
-*/
-
-
-
-
-/*!
-
-	\brief This structure keeps the information needed to autheticate
-	the user on a remote machine.
-	
-	The remote machine can either grant or refuse the access according 
-	to the information provided.
-	In case the NULL authentication is required, both 'username' and
-	'password' can be NULL pointers.
-	
-	This structure is meaningless if the source is not a remote interface;
-	in that case, the functions which requires such a structure can accept
-	a NULL pointer as well.
-*/
-struct pcap_rmtauth
-{
-	/*!
-		\brief Type of the authentication required.
-
-		In order to provide maximum flexibility, we can support different types
-		of authentication based on the value of this 'type' variable. The currently 
-		supported authentication methods are defined into the
-		\link remote_auth_methods Remote Authentication Methods Section\endlink.
-
-	*/
-	int type;
-	/*!
-		\brief Zero-terminated string containing the username that has to be 
-		used on the remote machine for authentication.
-		
-		This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication
-		and it can be NULL.
-	*/
-	char *username;
-	/*!
-		\brief Zero-terminated string containing the password that has to be 
-		used on the remote machine for authentication.
-		
-		This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication
-		and it can be NULL.
-	*/
-	char *password;
-};
-
-
-/*!
-	\brief This structure defines the information related to sampling.
-
-	In case the sampling is requested, the capturing device should read
-	only a subset of the packets coming from the source. The returned packets depend
-	on the sampling parameters.
-
-	\warning The sampling process is applied <strong>after</strong> the filtering process.
-	In other words, packets are filtered first, then the sampling process selects a
-	subset of the 'filtered' packets and it returns them to the caller.
-*/
-struct pcap_samp
-{
-	/*!
-		Method used for sampling. Currently, the supported methods are listed in the
-		\link remote_samp_methods Sampling Methods Section\endlink.
-	*/
-	int method;
-
-	/*!
-		This value depends on the sampling method defined. For its meaning, please check
-		at the \link remote_samp_methods Sampling Methods Section\endlink.
-	*/
-	int value;
-};
-
-
-
-
-//! Maximum lenght of an host name (needed for the RPCAP active mode)
-#define RPCAP_HOSTLIST_SIZE 1024
-
-
-/*!
-	\}
-*/ // end of public documentation
-
-
-// Exported functions
-
-
-
-/** \name New WinPcap functions
-
-	This section lists the new functions that are able to help considerably in writing
-	WinPcap programs because of their easiness of use.
- */
-//\{
-pcap_t *pcap_open(const char *source, int snaplen, int flags, int read_timeout, struct pcap_rmtauth *auth, char *errbuf);
-int pcap_createsrcstr(char *source, int type, const char *host, const char *port, const char *name, char *errbuf);
-int pcap_parsesrcstr(const char *source, int *type, char *host, char *port, char *name, char *errbuf);
-int pcap_findalldevs_ex(char *source, struct pcap_rmtauth *auth, pcap_if_t **alldevs, char *errbuf);
-struct pcap_samp *pcap_setsampling(pcap_t *p);
-
-//\}
-// End of new winpcap functions
-
-
-
-/** \name Remote Capture functions
- */
-//\{ 
-SOCKET pcap_remoteact_accept(const char *address, const char *port, const char *hostlist, char *connectinghost, struct pcap_rmtauth *auth, char *errbuf);
-int pcap_remoteact_list(char *hostlist, char sep, int size, char *errbuf);
-int pcap_remoteact_close(const char *host, char *errbuf);
-void pcap_remoteact_cleanup();
-//\}
-// End of remote capture functions
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif
-
diff --git a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/wpcap.lib b/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/wpcap.lib
deleted file mode 100644
index f832e0445..000000000
--- a/FreeRTOS-Plus/Demo/coreMQTT_Windows_Simulator/Common/WinPCap/wpcap.lib
+++ /dev/null