diff options
Diffstat (limited to 'FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_Echo_Posix/FreeRTOSConfig.h')
| -rw-r--r-- | FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_Echo_Posix/FreeRTOSConfig.h | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_Echo_Posix/FreeRTOSConfig.h b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_Echo_Posix/FreeRTOSConfig.h new file mode 100644 index 000000000..53d90df86 --- /dev/null +++ b/FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_Echo_Posix/FreeRTOSConfig.h @@ -0,0 +1,219 @@ +/* + * FreeRTOS V202011.00 + * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * https://www.FreeRTOS.org + * https://github.com/FreeRTOS + * + */ +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. See + * http://www.freertos.org/a00110.html + *----------------------------------------------------------*/ + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configUSE_IDLE_HOOK 1 +#define configUSE_TICK_HOOK 1 +#define configUSE_DAEMON_TASK_STARTUP_HOOK 1 +#define configTICK_RATE_HZ ( 1000 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */ +#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 70 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the win32 thread. */ +#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 65 * 1024 ) ) +#define configMAX_TASK_NAME_LEN ( 12 ) +#define configUSE_TRACE_FACILITY 1 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configCHECK_FOR_STACK_OVERFLOW 0 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configQUEUE_REGISTRY_SIZE 20 +#define configUSE_APPLICATION_TASK_TAG 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configUSE_ALTERNATIVE_API 0 +#define configUSE_QUEUE_SETS 1 +#define configUSE_TASK_NOTIFICATIONS 1 +#define configSUPPORT_STATIC_ALLOCATION 1 + +/* Software timer related configuration options. The maximum possible task +priority is configMAX_PRIORITIES - 1. The priority of the timer task is +deliberately set higher to ensure it is correctly capped back to +configMAX_PRIORITIES - 1. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) +#define configTIMER_QUEUE_LENGTH 20 +#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 ) + +#define configMAX_PRIORITIES ( 7 ) + +/* Run time stats gathering configuration options. */ +unsigned long ulGetRunTimeCounterValue( void ); /* Prototype of function that returns run time counter. */ +void vConfigureTimerForRunTimeStats( void ); /* Prototype of function that initialises the run time counter. */ +#define configGENERATE_RUN_TIME_STATS 1 + +/* Co-routine related configuration options. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) + +/* This demo can use of one or more example stats formatting functions. These +format the raw data provided by the uxTaskGetSystemState() function in to human +readable ASCII form. See the notes in the implementation of vTaskList() within +FreeRTOS/Source/tasks.c for limitations. */ +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Enables the test whereby a stack larger than the total heap size is +requested. */ +#define configSTACK_DEPTH_TYPE uint32_t + +/* Set the following definitions to 1 to include the API function, or zero +to exclude the API function. In most cases the linker will remove unused +functions anyway. */ +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskCleanUpResources 0 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 1 +#define INCLUDE_uxTaskGetStackHighWaterMark2 1 +#define INCLUDE_xTaskGetSchedulerState 1 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 1 +#define INCLUDE_xTaskGetIdleTaskHandle 1 +#define INCLUDE_xTaskGetHandle 1 +#define INCLUDE_eTaskGetState 1 +#define INCLUDE_xSemaphoreGetMutexHolder 1 +#define INCLUDE_xTimerPendFunctionCall 1 +#define INCLUDE_xTaskAbortDelay 1 + +#define configINCLUDE_MESSAGE_BUFFER_AMP_DEMO 0 +#if ( configINCLUDE_MESSAGE_BUFFER_AMP_DEMO == 1 ) + extern void vGenerateCoreBInterrupt( void * xUpdatedMessageBuffer ); + #define sbSEND_COMPLETED( pxStreamBuffer ) vGenerateCoreBInterrupt( pxStreamBuffer ) +#endif /* configINCLUDE_MESSAGE_BUFFER_AMP_DEMO */ + +extern void vAssertCalled( const char * const pcFileName, unsigned long ulLine ); + +/* projCOVERAGE_TEST should be defined on the command line so this file can be +used with multiple project configurations. If it is + */ +#ifndef projCOVERAGE_TEST + #error projCOVERAGE_TEST should be defined to 1 or 0 on the command line. +#endif + +#if( projCOVERAGE_TEST == 1 ) + /* Insert NOPs in empty decision paths to ensure both true and false paths + are being tested. */ + #define mtCOVERAGE_TEST_MARKER() __asm volatile( "NOP" ) + + /* Ensure the tick count overflows during the coverage test. */ + #define configINITIAL_TICK_COUNT 0xffffd800UL + + /* Allows tests of trying to allocate more than the heap has free. */ + #define configUSE_MALLOC_FAILED_HOOK 0 + + /* To test builds that remove the static qualifier for debug builds. */ + #define portREMOVE_STATIC_QUALIFIER +#else + /* It is a good idea to define configASSERT() while developing. configASSERT() + uses the same semantics as the standard C assert() macro. Don't define + configASSERT() when performing code coverage tests though, as it is not + intended to asserts() to fail, some some code is intended not to run if no + errors are present. */ + #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ ) + + #define configUSE_MALLOC_FAILED_HOOK 1 + + /* Include the FreeRTOS+Trace FreeRTOS trace macro definitions. */ + #include "trcRecorder.h" +#endif + +/* networking definitions */ +#define configMAC_ISR_SIMULATOR_PRIORITY ( configMAX_PRIORITIES - 1 ) +#define ipconfigUSE_NETWORK_EVENT_HOOK 1 +//#define ipconfigSOCK_DEFAULT_RECEIVE_BLOCK_TIME pdMS_TO_TICKS(5000) +#define configNETWORK_INTERFACE_TO_USE 1L + +/* The address of an echo server that will be used by the two demo echo client +tasks. +http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_Echo_Clients.html +http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/UDP_Echo_Clients.html */ + +#define configECHO_SERVER_ADDR0 172 +#define configECHO_SERVER_ADDR1 19 +#define configECHO_SERVER_ADDR2 195 +#define configECHO_SERVER_ADDR3 36 + +/* Default MAC address configuration. The demo creates a virtual network +connection that uses this MAC address by accessing the raw Ethernet/WiFi data +to and from a real network connection on the host PC. See the +configNETWORK_INTERFACE_TO_USE definition above for information on how to +configure the real network connection to use. */ +#define configMAC_ADDR0 0x00 +#define configMAC_ADDR1 0x11 +#define configMAC_ADDR2 0x22 +#define configMAC_ADDR3 0x33 +#define configMAC_ADDR4 0x44 +#define configMAC_ADDR5 0x41 + +/* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or +ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ + +#define configIP_ADDR0 172 +#define configIP_ADDR1 19 +#define configIP_ADDR2 195 +#define configIP_ADDR3 37 + +/* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to +0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ + +#define configGATEWAY_ADDR0 172 +#define configGATEWAY_ADDR1 19 +#define configGATEWAY_ADDR2 192 +#define configGATEWAY_ADDR3 1 + +/* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and +208.67.220.220. Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set +to 1 but a DNS server cannot be contacted.*/ + +#define configDNS_SERVER_ADDR0 10 +#define configDNS_SERVER_ADDR1 4 +#define configDNS_SERVER_ADDR2 4 +#define configDNS_SERVER_ADDR3 10 + +/* Default netmask configuration. Used in ipconfigUSE_DNS is set to 0, or +ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ +#define configNET_MASK0 255 +#define configNET_MASK1 255 +#define configNET_MASK2 240 +#define configNET_MASK3 0 + +/* The UDP port to which print messages are sent. */ +#define configPRINT_PORT ( 15000 ) + +#endif /* FREERTOS_CONFIG_H */ |