diff options
Diffstat (limited to 'FreeRTOS/Demo/CORTEX_M3_MPS2_QEMU_GCC/FreeRTOSConfig.h')
| -rw-r--r-- | FreeRTOS/Demo/CORTEX_M3_MPS2_QEMU_GCC/FreeRTOSConfig.h | 104 |
1 files changed, 40 insertions, 64 deletions
diff --git a/FreeRTOS/Demo/CORTEX_M3_MPS2_QEMU_GCC/FreeRTOSConfig.h b/FreeRTOS/Demo/CORTEX_M3_MPS2_QEMU_GCC/FreeRTOSConfig.h index 2a6302d46..4697c8a97 100644 --- a/FreeRTOS/Demo/CORTEX_M3_MPS2_QEMU_GCC/FreeRTOSConfig.h +++ b/FreeRTOS/Demo/CORTEX_M3_MPS2_QEMU_GCC/FreeRTOSConfig.h @@ -86,69 +86,45 @@ to exclude the API function. */ See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ #define configMAX_SYSCALL_INTERRUPT_PRIORITY 191 /* equivalent to 0xa0, or priority 5. */ #define configMAC_INTERRUPT_PRIORITY 5 +/* Prototype for the function used to print out. In this case it prints to the +| 10 console before the network is connected then a UDP port after the network has +| 9 connected. */ +extern void vLoggingPrintf( const char *pcFormatString, ... ); + + +/* Set to 1 to print out debug messages. If ipconfigHAS_DEBUG_PRINTF is set to +1 then FreeRTOS_debug_printf should be defined to the function used to print + out the debugging messages. */ +#define ipconfigHAS_DEBUG_PRINTF 1 + +#ifdef HEAP3 +#define xPortGetMinimumEverFreeHeapSize (x) +#define xPortGetFreeHeapSize (x) +#endif + +#if( ipconfigHAS_DEBUG_PRINTF == 1 ) +#include <stdio.h> +#define FreeRTOS_debug_printf(X) \ + printf("%p->%s %d: ", \ + xTaskGetCurrentTaskHandle(), \ + __FUNCTION__, \ + __LINE__); \ + vLoggingPrintf X +#endif + +/* Set to 1 to print out non debugging messages, for example the output of the + FreeRTOS_netstat() command, and ping replies. If ipconfigHAS_PRINTF is set to 1 + then FreeRTOS_printf should be set to the function used to print out the + messages. */ +#define ipconfigHAS_PRINTF 1 +#if( ipconfigHAS_PRINTF == 1 ) +#include <stdio.h> +#define FreeRTOS_printf(X) \ + printf("%p->%s %d: ", \ + xTaskGetCurrentTaskHandle(), \ + __FUNCTION__, \ + __LINE__); \ + vLoggingPrintf X +#endif - -/* networking definitions */ -#define configMAC_ISR_SIMULATOR_PRIORITY ( configMAX_PRIORITIES - 2 ) -#define ipconfigUSE_NETWORK_EVENT_HOOK 1 -//#define ipconfigSOCK_DEFAULT_RECEIVE_BLOCK_TIME pdMS_TO_TICKS(5000) -#define configNETWORK_INTERFACE_TO_USE 1L - -/* The address of an echo server that will be used by the two demo echo client -tasks. -http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_Echo_Clients.html -http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/UDP_Echo_Clients.html */ - -#define configECHO_SERVER_ADDR0 192 -#define configECHO_SERVER_ADDR1 168 -#define configECHO_SERVER_ADDR2 1 -#define configECHO_SERVER_ADDR3 201 - -/* Default MAC address configuration. The demo creates a virtual network -connection that uses this MAC address by accessing the raw Ethernet/WiFi data -to and from a real network connection on the host PC. See the -configNETWORK_INTERFACE_TO_USE definition above for information on how to -configure the real network connection to use. */ - -#define configMAC_ADDR0 0x52 -#define configMAC_ADDR1 0x54 -#define configMAC_ADDR2 0x00 -#define configMAC_ADDR3 0x12 -#define configMAC_ADDR4 0x34 -#define configMAC_ADDR5 0xAD - -/* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or -ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ - -#define configIP_ADDR0 10 -#define configIP_ADDR1 211 -#define configIP_ADDR2 55 -#define configIP_ADDR3 250 - -/* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to -0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ - -#define configGATEWAY_ADDR0 10 -#define configGATEWAY_ADDR1 211 -#define configGATEWAY_ADDR2 55 -#define configGATEWAY_ADDR3 1 - -/* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and -208.67.220.220. Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set -to 1 but a DNS server cannot be contacted.*/ - -#define configDNS_SERVER_ADDR0 127 -#define configDNS_SERVER_ADDR1 0 -#define configDNS_SERVER_ADDR2 0 -#define configDNS_SERVER_ADDR3 53 - -/* Default netmask configuration. Used in ipconfigUSE_DNS is set to 0, or -ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ -#define configNET_MASK0 255 -#define configNET_MASK1 255 -#define configNET_MASK2 255 -#define configNET_MASK3 0 - -/* The UDP port to which print messages are sent. */ -#define configPRINT_PORT ( 15000 ) #endif /* FREERTOS_CONFIG_H */
|