1 files changed, 310 insertions, 0 deletions
diff --git a/FreeRTOS-Labs/Demo/FreeRTOS_IoT_Libraries/shadow/shadow_device_operations/FreeRTOSIPConfig.h b/FreeRTOS-Labs/Demo/FreeRTOS_IoT_Libraries/shadow/shadow_device_operations/FreeRTOSIPConfig.h
new file mode 100644
index 000000000..6f86009bf
--- /dev/null
+++ b/FreeRTOS-Labs/Demo/FreeRTOS_IoT_Libraries/shadow/shadow_device_operations/FreeRTOSIPConfig.h
@@ -0,0 +1,310 @@
+/*
+ * FreeRTOS Kernel V10.2.1
+ * Copyright (C) 2019 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+/*****************************************************************************
+ *
+ * See the following URL for configuration information.
+ * http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_TCP/TCP_IP_Configuration.html
+ *
+ *****************************************************************************/
+
+#ifndef FREERTOS_IP_CONFIG_H
+#define FREERTOS_IP_CONFIG_H
+
+/* Prototype for the function used to print out.  In this case it prints to the
+console before the network is connected then a UDP port after the network has
+connected. */
+extern void vLoggingPrintf( const char *pcFormatString, ... );
+
+/* Set to 1 to print out debug messages.  If ipconfigHAS_DEBUG_PRINTF is set to
+1 then FreeRTOS_debug_printf should be defined to the function used to print
+out the debugging messages. */
+#define ipconfigHAS_DEBUG_PRINTF	0
+#if( ipconfigHAS_DEBUG_PRINTF == 1 )
+	#define FreeRTOS_debug_printf(X)	vLoggingPrintf X
+#endif
+
+/* Set to 1 to print out non debugging messages, for example the output of the
+FreeRTOS_netstat() command, and ping replies.  If ipconfigHAS_PRINTF is set to 1
+then FreeRTOS_printf should be set to the function used to print out the
+messages. */
+#define ipconfigHAS_PRINTF			1
+#if( ipconfigHAS_PRINTF == 1 )
+	#define FreeRTOS_printf(X)			vLoggingPrintf X
+#endif
+
+/* Define the byte order of the target MCU (the MCU FreeRTOS+TCP is executing
+on).  Valid options are pdFREERTOS_BIG_ENDIAN and pdFREERTOS_LITTLE_ENDIAN. */
+#define ipconfigBYTE_ORDER pdFREERTOS_LITTLE_ENDIAN
+
+/* If the network card/driver includes checksum offloading (IP/TCP/UDP checksums)
+then set ipconfigDRIVER_INCLUDED_RX_IP_CHECKSUM to 1 to prevent the software
+stack repeating the checksum calculations. */
+#define ipconfigDRIVER_INCLUDED_RX_IP_CHECKSUM   1
+
+/* Several API's will block until the result is known, or the action has been
+performed, for example FreeRTOS_send() and FreeRTOS_recv().  The timeouts can be
+set per socket, using setsockopt().  If not set, the times below will be
+used as defaults. */
+#define ipconfigSOCK_DEFAULT_RECEIVE_BLOCK_TIME	( 5000 )
+#define	ipconfigSOCK_DEFAULT_SEND_BLOCK_TIME	( 5000 )
+
+/* Include support for LLMNR: Link-local Multicast Name Resolution
+(non-Microsoft) */
+#define ipconfigUSE_LLMNR					( 0 )
+
+/* Include support for NBNS: NetBIOS Name Service (Microsoft) */
+#define ipconfigUSE_NBNS					( 0 )
+
+/* Include support for DNS caching.  For TCP, having a small DNS cache is very
+useful.  When a cache is present, ipconfigDNS_REQUEST_ATTEMPTS can be kept low
+and also DNS may use small timeouts.  If a DNS reply comes in after the DNS
+socket has been destroyed, the result will be stored into the cache.  The next
+call to FreeRTOS_gethostbyname() will return immediately, without even creating
+a socket. */
+#define ipconfigUSE_DNS_CACHE				( 1 )
+#define ipconfigDNS_CACHE_NAME_LENGTH		( 64 )
+#define ipconfigDNS_CACHE_ENTRIES			( 4 )
+#define ipconfigDNS_REQUEST_ATTEMPTS		( 2 )
+
+/* The IP stack executes it its own task (although any application task can make
+use of its services through the published sockets API). ipconfigUDP_TASK_PRIORITY
+sets the priority of the task that executes the IP stack.  The priority is a
+standard FreeRTOS task priority so can take any value from 0 (the lowest
+priority) to (configMAX_PRIORITIES - 1) (the highest priority).
+configMAX_PRIORITIES is a standard FreeRTOS configuration parameter defined in
+FreeRTOSConfig.h, not FreeRTOSIPConfig.h. Consideration needs to be given as to
+the priority assigned to the task executing the IP stack relative to the
+priority assigned to tasks that use the IP stack. */
+#define ipconfigIP_TASK_PRIORITY			( configMAX_PRIORITIES - 2 )
+
+/* The size, in words (not bytes), of the stack allocated to the FreeRTOS+TCP
+task.  This setting is less important when the FreeRTOS Win32 simulator is used
+as the Win32 simulator only stores a fixed amount of information on the task
+stack.  FreeRTOS includes optional stack overflow detection, see:
+http://www.freertos.org/Stacks-and-stack-overflow-checking.html */
+#define ipconfigIP_TASK_STACK_SIZE_WORDS	( configMINIMAL_STACK_SIZE * 5 )
+
+/* ipconfigRAND32() is called by the IP stack to generate random numbers for
+things such as a DHCP transaction number or initial sequence number.  Random
+number generation is performed via this macro to allow applications to use their
+own random number generation method.  For example, it might be possible to
+generate a random number by sampling noise on an analogue input. */
+extern UBaseType_t uxRand();
+#define ipconfigRAND32()	uxRand()
+
+/* If ipconfigUSE_NETWORK_EVENT_HOOK is set to 1 then FreeRTOS+TCP will call the
+network event hook at the appropriate times.  If ipconfigUSE_NETWORK_EVENT_HOOK
+is not set to 1 then the network event hook will never be called.  See
+http://www.FreeRTOS.org/FreeRTOS-Plus/FreeRTOS_Plus_UDP/API/vApplicationIPNetworkEventHook.shtml
+*/
+#define ipconfigUSE_NETWORK_EVENT_HOOK 1
+
+/* Sockets have a send block time attribute.  If FreeRTOS_sendto() is called but
+a network buffer cannot be obtained then the calling task is held in the Blocked
+state (so other tasks can continue to executed) until either a network buffer
+becomes available or the send block time expires.  If the send block time expires
+then the send operation is aborted.  The maximum allowable send block time is
+capped to the value set by ipconfigMAX_SEND_BLOCK_TIME_TICKS.  Capping the
+maximum allowable send block time prevents prevents a deadlock occurring when
+all the network buffers are in use and the tasks that process (and subsequently
+free) the network buffers are themselves blocked waiting for a network buffer.
+ipconfigMAX_SEND_BLOCK_TIME_TICKS is specified in RTOS ticks.  A time in
+milliseconds can be converted to a time in ticks by dividing the time in
+milliseconds by portTICK_PERIOD_MS. */
+#define ipconfigUDP_MAX_SEND_BLOCK_TIME_TICKS ( 5000 / portTICK_PERIOD_MS )
+
+/* If ipconfigUSE_DHCP is 1 then FreeRTOS+TCP will attempt to retrieve an IP
+address, netmask, DNS server address and gateway address from a DHCP server.  If
+ipconfigUSE_DHCP is 0 then FreeRTOS+TCP will use a static IP address.  The
+stack will revert to using the static IP address even when ipconfigUSE_DHCP is
+set to 1 if a valid configuration cannot be obtained from a DHCP server for any
+reason.  The static configuration used is that passed into the stack by the
+FreeRTOS_IPInit() function call. */
+#define ipconfigUSE_DHCP	1
+
+/* When ipconfigUSE_DHCP is set to 1, DHCP requests will be sent out at
+increasing time intervals until either a reply is received from a DHCP server
+and accepted, or the interval between transmissions reaches
+ipconfigMAXIMUM_DISCOVER_TX_PERIOD.  The IP stack will revert to using the
+static IP address passed as a parameter to FreeRTOS_IPInit() if the
+re-transmission time interval reaches ipconfigMAXIMUM_DISCOVER_TX_PERIOD without
+a DHCP reply being received. */
+#define ipconfigMAXIMUM_DISCOVER_TX_PERIOD		( 120000 / portTICK_PERIOD_MS )
+
+/* The ARP cache is a table that maps IP addresses to MAC addresses.  The IP
+stack can only send a UDP message to a remove IP address if it knowns the MAC
+address associated with the IP address, or the MAC address of the router used to
+contact the remote IP address.  When a UDP message is received from a remote IP
+address the MAC address and IP address are added to the ARP cache.  When a UDP
+message is sent to a remote IP address that does not already appear in the ARP
+cache then the UDP message is replaced by a ARP message that solicits the
+required MAC address information.  ipconfigARP_CACHE_ENTRIES defines the maximum
+number of entries that can exist in the ARP table at any one time. */
+#define ipconfigARP_CACHE_ENTRIES		6
+
+/* ARP requests that do not result in an ARP response will be re-transmitted a
+maximum of ipconfigMAX_ARP_RETRANSMISSIONS times before the ARP request is
+aborted. */
+#define ipconfigMAX_ARP_RETRANSMISSIONS ( 5 )
+
+/* ipconfigMAX_ARP_AGE defines the maximum time between an entry in the ARP
+table being created or refreshed and the entry being removed because it is stale.
+New ARP requests are sent for ARP cache entries that are nearing their maximum
+age.  ipconfigMAX_ARP_AGE is specified in tens of seconds, so a value of 150 is
+equal to 1500 seconds (or 25 minutes). */
+#define ipconfigMAX_ARP_AGE			150
+
+/* Implementing FreeRTOS_inet_addr() necessitates the use of string handling
+routines, which are relatively large.  To save code space the full
+FreeRTOS_inet_addr() implementation is made optional, and a smaller and faster
+alternative called FreeRTOS_inet_addr_quick() is provided.  FreeRTOS_inet_addr()
+takes an IP in decimal dot format (for example, "192.168.0.1") as its parameter.
+FreeRTOS_inet_addr_quick() takes an IP address as four separate numerical octets
+(for example, 192, 168, 0, 1) as its parameters.  If
+ipconfigINCLUDE_FULL_INET_ADDR is set to 1 then both FreeRTOS_inet_addr() and
+FreeRTOS_indet_addr_quick() are available.  If ipconfigINCLUDE_FULL_INET_ADDR is
+not set to 1 then only FreeRTOS_indet_addr_quick() is available. */
+#define ipconfigINCLUDE_FULL_INET_ADDR	1
+
+/* ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS defines the total number of network buffer that
+are available to the IP stack.  The total number of network buffers is limited
+to ensure the total amount of RAM that can be consumed by the IP stack is capped
+to a pre-determinable value. */
+#define ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS		60
+
+/* A FreeRTOS queue is used to send events from application tasks to the IP
+stack.  ipconfigEVENT_QUEUE_LENGTH sets the maximum number of events that can
+be queued for processing at any one time.  The event queue must be a minimum of
+5 greater than the total number of network buffers. */
+#define ipconfigEVENT_QUEUE_LENGTH		( ipconfigNUM_NETWORK_BUFFER_DESCRIPTORS + 5 )
+
+/* The address of a socket is the combination of its IP address and its port
+number.  FreeRTOS_bind() is used to manually allocate a port number to a socket
+(to 'bind' the socket to a port), but manual binding is not normally necessary
+for client sockets (those sockets that initiate outgoing connections rather than
+wait for incoming connections on a known port number).  If
+ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND is set to 1 then calling
+FreeRTOS_sendto() on a socket that has not yet been bound will result in the IP
+stack automatically binding the socket to a port number from the range
+socketAUTO_PORT_ALLOCATION_START_NUMBER to 0xffff.  If
+ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND is set to 0 then calling FreeRTOS_sendto()
+on a socket that has not yet been bound will result in the send operation being
+aborted. */
+#define ipconfigALLOW_SOCKET_SEND_WITHOUT_BIND 1
+
+/* Defines the Time To Live (TTL) values used in outgoing UDP packets. */
+#define ipconfigUDP_TIME_TO_LIVE		128
+#define ipconfigTCP_TIME_TO_LIVE		128 /* also defined in FreeRTOSIPConfigDefaults.h */
+
+/* USE_TCP: Use TCP and all its features */
+#define ipconfigUSE_TCP				( 1 )
+
+/* Use the TCP socket wake context with a callback. */
+#define ipconfigSOCKET_HAS_USER_WAKE_CALLBACK_WITH_CONTEXT    ( 1 )
+
+/* USE_WIN: Let TCP use windowing mechanism. */
+#define ipconfigUSE_TCP_WIN			( 1 )
+
+/* The MTU is the maximum number of bytes the payload of a network frame can
+contain.  For normal Ethernet V2 frames the maximum MTU is 1500.  Setting a
+lower value can save RAM, depending on the buffer management scheme used.  If
+ipconfigCAN_FRAGMENT_OUTGOING_PACKETS is 1 then (ipconfigNETWORK_MTU - 28) must
+be divisible by 8. */
+#define ipconfigNETWORK_MTU		1200
+
+/* Set ipconfigUSE_DNS to 1 to include a basic DNS client/resolver.  DNS is used
+through the FreeRTOS_gethostbyname() API function. */
+#define ipconfigUSE_DNS			1
+
+/* If ipconfigREPLY_TO_INCOMING_PINGS is set to 1 then the IP stack will
+generate replies to incoming ICMP echo (ping) requests. */
+#define ipconfigREPLY_TO_INCOMING_PINGS				1
+
+/* If ipconfigSUPPORT_OUTGOING_PINGS is set to 1 then the
+FreeRTOS_SendPingRequest() API function is available. */
+#define ipconfigSUPPORT_OUTGOING_PINGS				0
+
+/* If ipconfigSUPPORT_SELECT_FUNCTION is set to 1 then the FreeRTOS_select()
+(and associated) API function is available. */
+#define ipconfigSUPPORT_SELECT_FUNCTION				1
+
+/* If ipconfigFILTER_OUT_NON_ETHERNET_II_FRAMES is set to 1 then Ethernet frames
+that are not in Ethernet II format will be dropped.  This option is included for
+potential future IP stack developments. */
+#define ipconfigFILTER_OUT_NON_ETHERNET_II_FRAMES  1
+
+/* If ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES is set to 1 then it is the
+responsibility of the Ethernet interface to filter out packets that are of no
+interest.  If the Ethernet interface does not implement this functionality, then
+set ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES to 0 to have the IP stack
+perform the filtering instead (it is much less efficient for the stack to do it
+because the packet will already have been passed into the stack).  If the
+Ethernet driver does all the necessary filtering in hardware then software
+filtering can be removed by using a value other than 1 or 0. */
+#define ipconfigETHERNET_DRIVER_FILTERS_FRAME_TYPES	1
+
+/* The windows simulator cannot really simulate MAC interrupts, and needs to
+block occasionally to allow other tasks to run. */
+#define configWINDOWS_MAC_INTERRUPT_SIMULATOR_DELAY ( 20 / portTICK_PERIOD_MS )
+
+/* Advanced only: in order to access 32-bit fields in the IP packets with
+32-bit memory instructions, all packets will be stored 32-bit-aligned, plus 16-bits.
+This has to do with the contents of the IP-packets: all 32-bit fields are
+32-bit-aligned, plus 16-bit(!) */
+#define ipconfigPACKET_FILLER_SIZE 2
+
+/* Define the size of the pool of TCP window descriptors.  On the average, each
+TCP socket will use up to 2 x 6 descriptors, meaning that it can have 2 x 6
+outstanding packets (for Rx and Tx).  When using up to 10 TP sockets
+simultaneously, one could define TCP_WIN_SEG_COUNT as 120. */
+#define ipconfigTCP_WIN_SEG_COUNT		240
+
+/* Each TCP socket has a circular buffers for Rx and Tx, which have a fixed
+maximum size.  Define the size of Rx buffer for TCP sockets. */
+#define ipconfigTCP_RX_BUFFER_LENGTH			( 1000 )
+
+/* Define the size of Tx buffer for TCP sockets. */
+#define ipconfigTCP_TX_BUFFER_LENGTH			( 1000 )
+
+/* When using call-back handlers, the driver may check if the handler points to
+real program memory (RAM or flash) or just has a random non-zero value. */
+#define ipconfigIS_VALID_PROG_ADDRESS(x) ( (x) != NULL )
+
+/* Include support for TCP hang protection.  All sockets in a connecting or
+disconnecting stage will timeout after a period of non-activity. */
+#define ipconfigTCP_HANG_PROTECTION			( 1 )
+#define ipconfigTCP_HANG_PROTECTION_TIME	( 30 )
+
+/* Include support for TCP keep-alive messages. */
+#define ipconfigTCP_KEEP_ALIVE				( 1 )
+#define ipconfigTCP_KEEP_ALIVE_INTERVAL		( 20 ) /* in seconds */
+
+#define portINLINE __inline
+
+#endif /* FREERTOS_IP_CONFIG_H */