1 files changed, 28 insertions, 0 deletions
diff --git a/FreeRTOS-Labs/Source/FreeRTOS-Plus-Trace/streamports/ARM_ITM/Readme-ARM_ITM.txt b/FreeRTOS-Labs/Source/FreeRTOS-Plus-Trace/streamports/ARM_ITM/Readme-ARM_ITM.txt
new file mode 100644
index 000000000..0802b5331
--- /dev/null
+++ b/FreeRTOS-Labs/Source/FreeRTOS-Plus-Trace/streamports/ARM_ITM/Readme-ARM_ITM.txt
@@ -0,0 +1,28 @@
+Tracealyzer Stream Port for ARM Cortex-M ITM
+--------------------------------------------
+2018-05-04
+
+This directory contains a "stream port" for the Tracealyzer recorder library,
+i.e., the specific code needed to use a particular interface for streaming a
+Tracealyzer RTOS trace. The stream port is defined by a set of macros in
+trcStreamingPort.h, found in the "include" directory.
+
+This particular stream port targets ARM's ITM interface, which together with
+a fast debug probe such as a Keil ULINKpro or ULINKplus provides excellent
+performance. This stream port does not use any RAM buffer for the trace, but
+writes the data directly to the ITM registers. This is very fast.
+
+To setup Keil uVision for ITM tracing with a Keil ULINKpro (or ULINKplus),
+see Percepio Application Note PA-021 https://percepio.com/2018/05/04/keil-itm-support/
+
+Learning more:
+ - Tracealyzer User Manual (Help -> User Manual)
+ - https://percepio.com/gettingstarted
+ - Percepio Application Note PA-021 https://percepio.com/2018/05/04/keil-itm-support/
+ - About ITM trace, https://percepio.com/2016/06/09/arm-itm/
+ - About the recorder and custom streaming, http://percepio.com/2016/10/05/rtos-tracing
+
+For questions, please contact support@percepio.com
+
+Percepio AB
+www.percepio.com
+\ No newline at end of file