summaryrefslogtreecommitdiff
path: root/FreeRTOS-Labs/Source/mbedtls/include/mbedtls/ecdh.h
diff options
context:
space:
mode:
Diffstat (limited to 'FreeRTOS-Labs/Source/mbedtls/include/mbedtls/ecdh.h')
-rw-r--r--FreeRTOS-Labs/Source/mbedtls/include/mbedtls/ecdh.h428
1 files changed, 428 insertions, 0 deletions
diff --git a/FreeRTOS-Labs/Source/mbedtls/include/mbedtls/ecdh.h b/FreeRTOS-Labs/Source/mbedtls/include/mbedtls/ecdh.h
new file mode 100644
index 000000000..1b0bcdff5
--- /dev/null
+++ b/FreeRTOS-Labs/Source/mbedtls/include/mbedtls/ecdh.h
@@ -0,0 +1,428 @@
+/**
+ * \file ecdh.h
+ *
+ * \brief This file contains ECDH definitions and functions.
+ *
+ * The Elliptic Curve Diffie-Hellman (ECDH) protocol is an anonymous
+ * key agreement protocol allowing two parties to establish a shared
+ * secret over an insecure channel. Each party must have an
+ * elliptic-curve public–private key pair.
+ *
+ * For more information, see <em>NIST SP 800-56A Rev. 2: Recommendation for
+ * Pair-Wise Key Establishment Schemes Using Discrete Logarithm
+ * Cryptography</em>.
+ */
+/*
+ * Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * This file is part of Mbed TLS (https://tls.mbed.org)
+ */
+
+#ifndef MBEDTLS_ECDH_H
+#define MBEDTLS_ECDH_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include "ecp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Defines the source of the imported EC key.
+ */
+typedef enum
+{
+ MBEDTLS_ECDH_OURS, /**< Our key. */
+ MBEDTLS_ECDH_THEIRS, /**< The key of the peer. */
+} mbedtls_ecdh_side;
+
+#if !defined(MBEDTLS_ECDH_LEGACY_CONTEXT)
+/**
+ * Defines the ECDH implementation used.
+ *
+ * Later versions of the library may add new variants, therefore users should
+ * not make any assumptions about them.
+ */
+typedef enum
+{
+ MBEDTLS_ECDH_VARIANT_NONE = 0, /*!< Implementation not defined. */
+ MBEDTLS_ECDH_VARIANT_MBEDTLS_2_0,/*!< The default Mbed TLS implementation */
+} mbedtls_ecdh_variant;
+
+/**
+ * The context used by the default ECDH implementation.
+ *
+ * Later versions might change the structure of this context, therefore users
+ * should not make any assumptions about the structure of
+ * mbedtls_ecdh_context_mbed.
+ */
+typedef struct mbedtls_ecdh_context_mbed
+{
+ mbedtls_ecp_group grp; /*!< The elliptic curve used. */
+ mbedtls_mpi d; /*!< The private key. */
+ mbedtls_ecp_point Q; /*!< The public key. */
+ mbedtls_ecp_point Qp; /*!< The value of the public key of the peer. */
+ mbedtls_mpi z; /*!< The shared secret. */
+#if defined(MBEDTLS_ECP_RESTARTABLE)
+ mbedtls_ecp_restart_ctx rs; /*!< The restart context for EC computations. */
+#endif
+} mbedtls_ecdh_context_mbed;
+#endif
+
+/**
+ *
+ * \warning Performing multiple operations concurrently on the same
+ * ECDSA context is not supported; objects of this type
+ * should not be shared between multiple threads.
+ * \brief The ECDH context structure.
+ */
+typedef struct mbedtls_ecdh_context
+{
+#if defined(MBEDTLS_ECDH_LEGACY_CONTEXT)
+ mbedtls_ecp_group grp; /*!< The elliptic curve used. */
+ mbedtls_mpi d; /*!< The private key. */
+ mbedtls_ecp_point Q; /*!< The public key. */
+ mbedtls_ecp_point Qp; /*!< The value of the public key of the peer. */
+ mbedtls_mpi z; /*!< The shared secret. */
+ int point_format; /*!< The format of point export in TLS messages. */
+ mbedtls_ecp_point Vi; /*!< The blinding value. */
+ mbedtls_ecp_point Vf; /*!< The unblinding value. */
+ mbedtls_mpi _d; /*!< The previous \p d. */
+#if defined(MBEDTLS_ECP_RESTARTABLE)
+ int restart_enabled; /*!< The flag for restartable mode. */
+ mbedtls_ecp_restart_ctx rs; /*!< The restart context for EC computations. */
+#endif /* MBEDTLS_ECP_RESTARTABLE */
+#else
+ uint8_t point_format; /*!< The format of point export in TLS messages
+ as defined in RFC 4492. */
+ mbedtls_ecp_group_id grp_id;/*!< The elliptic curve used. */
+ mbedtls_ecdh_variant var; /*!< The ECDH implementation/structure used. */
+ union
+ {
+ mbedtls_ecdh_context_mbed mbed_ecdh;
+ } ctx; /*!< Implementation-specific context. The
+ context in use is specified by the \c var
+ field. */
+#if defined(MBEDTLS_ECP_RESTARTABLE)
+ uint8_t restart_enabled; /*!< The flag for restartable mode. Functions of
+ an alternative implementation not supporting
+ restartable mode must return
+ MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED error
+ if this flag is set. */
+#endif /* MBEDTLS_ECP_RESTARTABLE */
+#endif /* MBEDTLS_ECDH_LEGACY_CONTEXT */
+}
+mbedtls_ecdh_context;
+
+/**
+ * \brief This function generates an ECDH keypair on an elliptic
+ * curve.
+ *
+ * This function performs the first of two core computations
+ * implemented during the ECDH key exchange. The second core
+ * computation is performed by mbedtls_ecdh_compute_shared().
+ *
+ * \see ecp.h
+ *
+ * \param grp The ECP group to use. This must be initialized and have
+ * domain parameters loaded, for example through
+ * mbedtls_ecp_load() or mbedtls_ecp_tls_read_group().
+ * \param d The destination MPI (private key).
+ * This must be initialized.
+ * \param Q The destination point (public key).
+ * This must be initialized.
+ * \param f_rng The RNG function to use. This must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be
+ * \c NULL in case \p f_rng doesn't need a context argument.
+ *
+ * \return \c 0 on success.
+ * \return Another \c MBEDTLS_ERR_ECP_XXX or
+ * \c MBEDTLS_MPI_XXX error code on failure.
+ */
+int mbedtls_ecdh_gen_public( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q,
+ int (*f_rng)(void *, unsigned char *, size_t),
+ void *p_rng );
+
+/**
+ * \brief This function computes the shared secret.
+ *
+ * This function performs the second of two core computations
+ * implemented during the ECDH key exchange. The first core
+ * computation is performed by mbedtls_ecdh_gen_public().
+ *
+ * \see ecp.h
+ *
+ * \note If \p f_rng is not NULL, it is used to implement
+ * countermeasures against side-channel attacks.
+ * For more information, see mbedtls_ecp_mul().
+ *
+ * \param grp The ECP group to use. This must be initialized and have
+ * domain parameters loaded, for example through
+ * mbedtls_ecp_load() or mbedtls_ecp_tls_read_group().
+ * \param z The destination MPI (shared secret).
+ * This must be initialized.
+ * \param Q The public key from another party.
+ * This must be initialized.
+ * \param d Our secret exponent (private key).
+ * This must be initialized.
+ * \param f_rng The RNG function. This may be \c NULL if randomization
+ * of intermediate results during the ECP computations is
+ * not needed (discouraged). See the documentation of
+ * mbedtls_ecp_mul() for more.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be
+ * \c NULL if \p f_rng is \c NULL or doesn't need a
+ * context argument.
+ *
+ * \return \c 0 on success.
+ * \return Another \c MBEDTLS_ERR_ECP_XXX or
+ * \c MBEDTLS_MPI_XXX error code on failure.
+ */
+int mbedtls_ecdh_compute_shared( mbedtls_ecp_group *grp, mbedtls_mpi *z,
+ const mbedtls_ecp_point *Q, const mbedtls_mpi *d,
+ int (*f_rng)(void *, unsigned char *, size_t),
+ void *p_rng );
+
+/**
+ * \brief This function initializes an ECDH context.
+ *
+ * \param ctx The ECDH context to initialize. This must not be \c NULL.
+ */
+void mbedtls_ecdh_init( mbedtls_ecdh_context *ctx );
+
+/**
+ * \brief This function sets up the ECDH context with the information
+ * given.
+ *
+ * This function should be called after mbedtls_ecdh_init() but
+ * before mbedtls_ecdh_make_params(). There is no need to call
+ * this function before mbedtls_ecdh_read_params().
+ *
+ * This is the first function used by a TLS server for ECDHE
+ * ciphersuites.
+ *
+ * \param ctx The ECDH context to set up. This must be initialized.
+ * \param grp_id The group id of the group to set up the context for.
+ *
+ * \return \c 0 on success.
+ */
+int mbedtls_ecdh_setup( mbedtls_ecdh_context *ctx,
+ mbedtls_ecp_group_id grp_id );
+
+/**
+ * \brief This function frees a context.
+ *
+ * \param ctx The context to free. This may be \c NULL, in which
+ * case this function does nothing. If it is not \c NULL,
+ * it must point to an initialized ECDH context.
+ */
+void mbedtls_ecdh_free( mbedtls_ecdh_context *ctx );
+
+/**
+ * \brief This function generates an EC key pair and exports its
+ * in the format used in a TLS ServerKeyExchange handshake
+ * message.
+ *
+ * This is the second function used by a TLS server for ECDHE
+ * ciphersuites. (It is called after mbedtls_ecdh_setup().)
+ *
+ * \see ecp.h
+ *
+ * \param ctx The ECDH context to use. This must be initialized
+ * and bound to a group, for example via mbedtls_ecdh_setup().
+ * \param olen The address at which to store the number of Bytes written.
+ * \param buf The destination buffer. This must be a writable buffer of
+ * length \p blen Bytes.
+ * \param blen The length of the destination buffer \p buf in Bytes.
+ * \param f_rng The RNG function to use. This must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be
+ * \c NULL in case \p f_rng doesn't need a context argument.
+ *
+ * \return \c 0 on success.
+ * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
+ * operations was reached: see \c mbedtls_ecp_set_max_ops().
+ * \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ */
+int mbedtls_ecdh_make_params( mbedtls_ecdh_context *ctx, size_t *olen,
+ unsigned char *buf, size_t blen,
+ int (*f_rng)(void *, unsigned char *, size_t),
+ void *p_rng );
+
+/**
+ * \brief This function parses the ECDHE parameters in a
+ * TLS ServerKeyExchange handshake message.
+ *
+ * \note In a TLS handshake, this is the how the client
+ * sets up its ECDHE context from the server's public
+ * ECDHE key material.
+ *
+ * \see ecp.h
+ *
+ * \param ctx The ECDHE context to use. This must be initialized.
+ * \param buf On input, \c *buf must be the start of the input buffer.
+ * On output, \c *buf is updated to point to the end of the
+ * data that has been read. On success, this is the first byte
+ * past the end of the ServerKeyExchange parameters.
+ * On error, this is the point at which an error has been
+ * detected, which is usually not useful except to debug
+ * failures.
+ * \param end The end of the input buffer.
+ *
+ * \return \c 0 on success.
+ * \return An \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ *
+ */
+int mbedtls_ecdh_read_params( mbedtls_ecdh_context *ctx,
+ const unsigned char **buf,
+ const unsigned char *end );
+
+/**
+ * \brief This function sets up an ECDH context from an EC key.
+ *
+ * It is used by clients and servers in place of the
+ * ServerKeyEchange for static ECDH, and imports ECDH
+ * parameters from the EC key information of a certificate.
+ *
+ * \see ecp.h
+ *
+ * \param ctx The ECDH context to set up. This must be initialized.
+ * \param key The EC key to use. This must be initialized.
+ * \param side Defines the source of the key. Possible values are:
+ * - #MBEDTLS_ECDH_OURS: The key is ours.
+ * - #MBEDTLS_ECDH_THEIRS: The key is that of the peer.
+ *
+ * \return \c 0 on success.
+ * \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ *
+ */
+int mbedtls_ecdh_get_params( mbedtls_ecdh_context *ctx,
+ const mbedtls_ecp_keypair *key,
+ mbedtls_ecdh_side side );
+
+/**
+ * \brief This function generates a public key and exports it
+ * as a TLS ClientKeyExchange payload.
+ *
+ * This is the second function used by a TLS client for ECDH(E)
+ * ciphersuites.
+ *
+ * \see ecp.h
+ *
+ * \param ctx The ECDH context to use. This must be initialized
+ * and bound to a group, the latter usually by
+ * mbedtls_ecdh_read_params().
+ * \param olen The address at which to store the number of Bytes written.
+ * This must not be \c NULL.
+ * \param buf The destination buffer. This must be a writable buffer
+ * of length \p blen Bytes.
+ * \param blen The size of the destination buffer \p buf in Bytes.
+ * \param f_rng The RNG function to use. This must not be \c NULL.
+ * \param p_rng The RNG context to be passed to \p f_rng. This may be
+ * \c NULL in case \p f_rng doesn't need a context argument.
+ *
+ * \return \c 0 on success.
+ * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
+ * operations was reached: see \c mbedtls_ecp_set_max_ops().
+ * \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ */
+int mbedtls_ecdh_make_public( mbedtls_ecdh_context *ctx, size_t *olen,
+ unsigned char *buf, size_t blen,
+ int (*f_rng)(void *, unsigned char *, size_t),
+ void *p_rng );
+
+/**
+ * \brief This function parses and processes the ECDHE payload of a
+ * TLS ClientKeyExchange message.
+ *
+ * This is the third function used by a TLS server for ECDH(E)
+ * ciphersuites. (It is called after mbedtls_ecdh_setup() and
+ * mbedtls_ecdh_make_params().)
+ *
+ * \see ecp.h
+ *
+ * \param ctx The ECDH context to use. This must be initialized
+ * and bound to a group, for example via mbedtls_ecdh_setup().
+ * \param buf The pointer to the ClientKeyExchange payload. This must
+ * be a readable buffer of length \p blen Bytes.
+ * \param blen The length of the input buffer \p buf in Bytes.
+ *
+ * \return \c 0 on success.
+ * \return An \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ */
+int mbedtls_ecdh_read_public( mbedtls_ecdh_context *ctx,
+ const unsigned char *buf, size_t blen );
+
+/**
+ * \brief This function derives and exports the shared secret.
+ *
+ * This is the last function used by both TLS client
+ * and servers.
+ *
+ * \note If \p f_rng is not NULL, it is used to implement
+ * countermeasures against side-channel attacks.
+ * For more information, see mbedtls_ecp_mul().
+ *
+ * \see ecp.h
+
+ * \param ctx The ECDH context to use. This must be initialized
+ * and have its own private key generated and the peer's
+ * public key imported.
+ * \param olen The address at which to store the total number of
+ * Bytes written on success. This must not be \c NULL.
+ * \param buf The buffer to write the generated shared key to. This
+ * must be a writable buffer of size \p blen Bytes.
+ * \param blen The length of the destination buffer \p buf in Bytes.
+ * \param f_rng The RNG function, for blinding purposes. This may
+ * b \c NULL if blinding isn't needed.
+ * \param p_rng The RNG context. This may be \c NULL if \p f_rng
+ * doesn't need a context argument.
+ *
+ * \return \c 0 on success.
+ * \return #MBEDTLS_ERR_ECP_IN_PROGRESS if maximum number of
+ * operations was reached: see \c mbedtls_ecp_set_max_ops().
+ * \return Another \c MBEDTLS_ERR_ECP_XXX error code on failure.
+ */
+int mbedtls_ecdh_calc_secret( mbedtls_ecdh_context *ctx, size_t *olen,
+ unsigned char *buf, size_t blen,
+ int (*f_rng)(void *, unsigned char *, size_t),
+ void *p_rng );
+
+#if defined(MBEDTLS_ECP_RESTARTABLE)
+/**
+ * \brief This function enables restartable EC computations for this
+ * context. (Default: disabled.)
+ *
+ * \see \c mbedtls_ecp_set_max_ops()
+ *
+ * \note It is not possible to safely disable restartable
+ * computations once enabled, except by free-ing the context,
+ * which cancels possible in-progress operations.
+ *
+ * \param ctx The ECDH context to use. This must be initialized.
+ */
+void mbedtls_ecdh_enable_restart( mbedtls_ecdh_context *ctx );
+#endif /* MBEDTLS_ECP_RESTARTABLE */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ecdh.h */