diff options
Diffstat (limited to 'FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap')
7 files changed, 0 insertions, 1743 deletions
diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/bluetooth.h b/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/bluetooth.h deleted file mode 100644 index 7bf65df03..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/bluetooth.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (c) 2006 Paolo Abeni (Italy) - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * bluetooth data struct - * By Paolo Abeni <paolo.abeni@email.it> - * - * @(#) $Header: /tcpdump/master/libpcap/pcap/bluetooth.h,v 1.1 2007/09/22 02:10:17 guy Exp $ - */ - -#ifndef _PCAP_BLUETOOTH_STRUCTS_H__ -#define _PCAP_BLUETOOTH_STRUCTS_H__ - -/* - * Header prepended libpcap to each bluetooth h:4 frame. - * fields are in network byte order - */ -typedef struct _pcap_bluetooth_h4_header { - u_int32_t direction; /* if first bit is set direction is incoming */ -} pcap_bluetooth_h4_header; - - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/bpf.h b/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/bpf.h deleted file mode 100644 index 9f4ca33e3..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/bpf.h +++ /dev/null @@ -1,934 +0,0 @@ -/*- - * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from the Stanford/CMU enet packet filter, - * (net/enet.c) distributed as part of 4.3BSD, and code contributed - * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence - * Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)bpf.h 7.1 (Berkeley) 5/7/91 - * - * @(#) $Header: /tcpdump/master/libpcap/pcap/bpf.h,v 1.19.2.8 2008-09-22 20:16:01 guy Exp $ (LBL) - */ - -/* - * This is libpcap's cut-down version of bpf.h; it includes only - * the stuff needed for the code generator and the userland BPF - * interpreter, and the libpcap APIs for setting filters, etc.. - * - * "pcap-bpf.c" will include the native OS version, as it deals with - * the OS's BPF implementation. - * - * XXX - should this all just be moved to "pcap.h"? - */ - -#ifndef BPF_MAJOR_VERSION - -#ifdef __cplusplus -extern "C" { -#endif - -/* BSD style release date */ -#define BPF_RELEASE 199606 - -#ifdef MSDOS /* must be 32-bit */ -typedef long bpf_int32; -typedef unsigned long bpf_u_int32; -#else -typedef int bpf_int32; -typedef u_int bpf_u_int32; -#endif - -/* - * Alignment macros. BPF_WORDALIGN rounds up to the next - * even multiple of BPF_ALIGNMENT. - */ -#ifndef __NetBSD__ -#define BPF_ALIGNMENT sizeof(bpf_int32) -#else -#define BPF_ALIGNMENT sizeof(long) -#endif -#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1)) - -#define BPF_MAXBUFSIZE 0x8000 -#define BPF_MINBUFSIZE 32 - -/* - * Structure for "pcap_compile()", "pcap_setfilter()", etc.. - */ -struct bpf_program { - u_int bf_len; - struct bpf_insn *bf_insns; -}; - -/* - * Struct return by BIOCVERSION. This represents the version number of - * the filter language described by the instruction encodings below. - * bpf understands a program iff kernel_major == filter_major && - * kernel_minor >= filter_minor, that is, if the value returned by the - * running kernel has the same major number and a minor number equal - * equal to or less than the filter being downloaded. Otherwise, the - * results are undefined, meaning an error may be returned or packets - * may be accepted haphazardly. - * It has nothing to do with the source code version. - */ -struct bpf_version { - u_short bv_major; - u_short bv_minor; -}; -/* Current version number of filter architecture. */ -#define BPF_MAJOR_VERSION 1 -#define BPF_MINOR_VERSION 1 - -/* - * Data-link level type codes. - * - * Do *NOT* add new values to this list without asking - * "tcpdump-workers@lists.tcpdump.org" for a value. Otherwise, you run - * the risk of using a value that's already being used for some other - * purpose, and of having tools that read libpcap-format captures not - * being able to handle captures with your new DLT_ value, with no hope - * that they will ever be changed to do so (as that would destroy their - * ability to read captures using that value for that other purpose). - */ - -/* - * These are the types that are the same on all platforms, and that - * have been defined by <net/bpf.h> for ages. - */ -#define DLT_NULL 0 /* BSD loopback encapsulation */ -#define DLT_EN10MB 1 /* Ethernet (10Mb) */ -#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */ -#define DLT_AX25 3 /* Amateur Radio AX.25 */ -#define DLT_PRONET 4 /* Proteon ProNET Token Ring */ -#define DLT_CHAOS 5 /* Chaos */ -#define DLT_IEEE802 6 /* 802.5 Token Ring */ -#define DLT_ARCNET 7 /* ARCNET, with BSD-style header */ -#define DLT_SLIP 8 /* Serial Line IP */ -#define DLT_PPP 9 /* Point-to-point Protocol */ -#define DLT_FDDI 10 /* FDDI */ - -/* - * These are types that are different on some platforms, and that - * have been defined by <net/bpf.h> for ages. We use #ifdefs to - * detect the BSDs that define them differently from the traditional - * libpcap <net/bpf.h> - * - * XXX - DLT_ATM_RFC1483 is 13 in BSD/OS, and DLT_RAW is 14 in BSD/OS, - * but I don't know what the right #define is for BSD/OS. - */ -#define DLT_ATM_RFC1483 11 /* LLC-encapsulated ATM */ - -#ifdef __OpenBSD__ -#define DLT_RAW 14 /* raw IP */ -#else -#define DLT_RAW 12 /* raw IP */ -#endif - -/* - * Given that the only OS that currently generates BSD/OS SLIP or PPP - * is, well, BSD/OS, arguably everybody should have chosen its values - * for DLT_SLIP_BSDOS and DLT_PPP_BSDOS, which are 15 and 16, but they - * didn't. So it goes. - */ -#if defined(__NetBSD__) || defined(__FreeBSD__) -#ifndef DLT_SLIP_BSDOS -#define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */ -#define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */ -#endif -#else -#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */ -#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */ -#endif - -/* - * 17 is used for DLT_OLD_PFLOG in OpenBSD; - * OBSOLETE: DLT_PFLOG is 117 in OpenBSD now as well. See below. - * 18 is used for DLT_PFSYNC in OpenBSD; don't use it for anything else. - */ - -#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */ - -/* - * Apparently Redback uses this for its SmartEdge 400/800. I hope - * nobody else decided to use it, too. - */ -#define DLT_REDBACK_SMARTEDGE 32 - -/* - * These values are defined by NetBSD; other platforms should refrain from - * using them for other purposes, so that NetBSD savefiles with link - * types of 50 or 51 can be read as this type on all platforms. - */ -#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */ -#define DLT_PPP_ETHER 51 /* PPP over Ethernet */ - -/* - * The Axent Raptor firewall - now the Symantec Enterprise Firewall - uses - * a link-layer type of 99 for the tcpdump it supplies. The link-layer - * header has 6 bytes of unknown data, something that appears to be an - * Ethernet type, and 36 bytes that appear to be 0 in at least one capture - * I've seen. - */ -#define DLT_SYMANTEC_FIREWALL 99 - -/* - * Values between 100 and 103 are used in capture file headers as - * link-layer types corresponding to DLT_ types that differ - * between platforms; don't use those values for new DLT_ new types. - */ - -/* - * This value was defined by libpcap 0.5; platforms that have defined - * it with a different value should define it here with that value - - * a link type of 104 in a save file will be mapped to DLT_C_HDLC, - * whatever value that happens to be, so programs will correctly - * handle files with that link type regardless of the value of - * DLT_C_HDLC. - * - * The name DLT_C_HDLC was used by BSD/OS; we use that name for source - * compatibility with programs written for BSD/OS. - * - * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well, - * for source compatibility with programs written for libpcap 0.5. - */ -#define DLT_C_HDLC 104 /* Cisco HDLC */ -#define DLT_CHDLC DLT_C_HDLC - -#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */ - -/* - * 106 is reserved for Linux Classical IP over ATM; it's like DLT_RAW, - * except when it isn't. (I.e., sometimes it's just raw IP, and - * sometimes it isn't.) We currently handle it as DLT_LINUX_SLL, - * so that we don't have to worry about the link-layer header.) - */ - -/* - * Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides - * with other values. - * DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header - * (DLCI, etc.). - */ -#define DLT_FRELAY 107 - -/* - * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except - * that the AF_ type in the link-layer header is in network byte order. - * - * DLT_LOOP is 12 in OpenBSD, but that's DLT_RAW in other OSes, so - * we don't use 12 for it in OSes other than OpenBSD. - */ -#ifdef __OpenBSD__ -#define DLT_LOOP 12 -#else -#define DLT_LOOP 108 -#endif - -/* - * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's - * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other - * than OpenBSD. - */ -#ifdef __OpenBSD__ -#define DLT_ENC 13 -#else -#define DLT_ENC 109 -#endif - -/* - * Values between 110 and 112 are reserved for use in capture file headers - * as link-layer types corresponding to DLT_ types that might differ - * between platforms; don't use those values for new DLT_ types - * other than the corresponding DLT_ types. - */ - -/* - * This is for Linux cooked sockets. - */ -#define DLT_LINUX_SLL 113 - -/* - * Apple LocalTalk hardware. - */ -#define DLT_LTALK 114 - -/* - * Acorn Econet. - */ -#define DLT_ECONET 115 - -/* - * Reserved for use with OpenBSD ipfilter. - */ -#define DLT_IPFILTER 116 - -/* - * OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, but that's DLT_LANE8023 - * in SuSE 6.3, so we can't use 17 for it in capture-file headers. - * - * XXX: is there a conflict with DLT_PFSYNC 18 as well? - */ -#ifdef __OpenBSD__ -#define DLT_OLD_PFLOG 17 -#define DLT_PFSYNC 18 -#endif -#define DLT_PFLOG 117 - -/* - * Registered for Cisco-internal use. - */ -#define DLT_CISCO_IOS 118 - -/* - * For 802.11 cards using the Prism II chips, with a link-layer - * header including Prism monitor mode information plus an 802.11 - * header. - */ -#define DLT_PRISM_HEADER 119 - -/* - * Reserved for Aironet 802.11 cards, with an Aironet link-layer header - * (see Doug Ambrisko's FreeBSD patches). - */ -#define DLT_AIRONET_HEADER 120 - -/* - * Reserved for Siemens HiPath HDLC. - */ -#define DLT_HHDLC 121 - -/* - * This is for RFC 2625 IP-over-Fibre Channel. - * - * This is not for use with raw Fibre Channel, where the link-layer - * header starts with a Fibre Channel frame header; it's for IP-over-FC, - * where the link-layer header starts with an RFC 2625 Network_Header - * field. - */ -#define DLT_IP_OVER_FC 122 - -/* - * This is for Full Frontal ATM on Solaris with SunATM, with a - * pseudo-header followed by an AALn PDU. - * - * There may be other forms of Full Frontal ATM on other OSes, - * with different pseudo-headers. - * - * If ATM software returns a pseudo-header with VPI/VCI information - * (and, ideally, packet type information, e.g. signalling, ILMI, - * LANE, LLC-multiplexed traffic, etc.), it should not use - * DLT_ATM_RFC1483, but should get a new DLT_ value, so tcpdump - * and the like don't have to infer the presence or absence of a - * pseudo-header and the form of the pseudo-header. - */ -#define DLT_SUNATM 123 /* Solaris+SunATM */ - -/* - * Reserved as per request from Kent Dahlgren <kent@praesum.com> - * for private use. - */ -#define DLT_RIO 124 /* RapidIO */ -#define DLT_PCI_EXP 125 /* PCI Express */ -#define DLT_AURORA 126 /* Xilinx Aurora link layer */ - -/* - * Header for 802.11 plus a number of bits of link-layer information - * including radio information, used by some recent BSD drivers as - * well as the madwifi Atheros driver for Linux. - */ -#define DLT_IEEE802_11_RADIO 127 /* 802.11 plus radiotap radio header */ - -/* - * Reserved for the TZSP encapsulation, as per request from - * Chris Waters <chris.waters@networkchemistry.com> - * TZSP is a generic encapsulation for any other link type, - * which includes a means to include meta-information - * with the packet, e.g. signal strength and channel - * for 802.11 packets. - */ -#define DLT_TZSP 128 /* Tazmen Sniffer Protocol */ - -/* - * BSD's ARCNET headers have the source host, destination host, - * and type at the beginning of the packet; that's what's handed - * up to userland via BPF. - * - * Linux's ARCNET headers, however, have a 2-byte offset field - * between the host IDs and the type; that's what's handed up - * to userland via PF_PACKET sockets. - * - * We therefore have to have separate DLT_ values for them. - */ -#define DLT_ARCNET_LINUX 129 /* ARCNET */ - -/* - * Juniper-private data link types, as per request from - * Hannes Gredler <hannes@juniper.net>. The DLT_s are used - * for passing on chassis-internal metainformation such as - * QOS profiles, etc.. - */ -#define DLT_JUNIPER_MLPPP 130 -#define DLT_JUNIPER_MLFR 131 -#define DLT_JUNIPER_ES 132 -#define DLT_JUNIPER_GGSN 133 -#define DLT_JUNIPER_MFR 134 -#define DLT_JUNIPER_ATM2 135 -#define DLT_JUNIPER_SERVICES 136 -#define DLT_JUNIPER_ATM1 137 - -/* - * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund - * <dieter@apple.com>. The header that's presented is an Ethernet-like - * header: - * - * #define FIREWIRE_EUI64_LEN 8 - * struct firewire_header { - * u_char firewire_dhost[FIREWIRE_EUI64_LEN]; - * u_char firewire_shost[FIREWIRE_EUI64_LEN]; - * u_short firewire_type; - * }; - * - * with "firewire_type" being an Ethernet type value, rather than, - * for example, raw GASP frames being handed up. - */ -#define DLT_APPLE_IP_OVER_IEEE1394 138 - -/* - * Various SS7 encapsulations, as per a request from Jeff Morriss - * <jeff.morriss[AT]ulticom.com> and subsequent discussions. - */ -#define DLT_MTP2_WITH_PHDR 139 /* pseudo-header with various info, followed by MTP2 */ -#define DLT_MTP2 140 /* MTP2, without pseudo-header */ -#define DLT_MTP3 141 /* MTP3, without pseudo-header or MTP2 */ -#define DLT_SCCP 142 /* SCCP, without pseudo-header or MTP2 or MTP3 */ - -/* - * DOCSIS MAC frames. - */ -#define DLT_DOCSIS 143 - -/* - * Linux-IrDA packets. Protocol defined at http://www.irda.org. - * Those packets include IrLAP headers and above (IrLMP...), but - * don't include Phy framing (SOF/EOF/CRC & byte stuffing), because Phy - * framing can be handled by the hardware and depend on the bitrate. - * This is exactly the format you would get capturing on a Linux-IrDA - * interface (irdaX), but not on a raw serial port. - * Note the capture is done in "Linux-cooked" mode, so each packet include - * a fake packet header (struct sll_header). This is because IrDA packet - * decoding is dependant on the direction of the packet (incomming or - * outgoing). - * When/if other platform implement IrDA capture, we may revisit the - * issue and define a real DLT_IRDA... - * Jean II - */ -#define DLT_LINUX_IRDA 144 - -/* - * Reserved for IBM SP switch and IBM Next Federation switch. - */ -#define DLT_IBM_SP 145 -#define DLT_IBM_SN 146 - -/* - * Reserved for private use. If you have some link-layer header type - * that you want to use within your organization, with the capture files - * using that link-layer header type not ever be sent outside your - * organization, you can use these values. - * - * No libpcap release will use these for any purpose, nor will any - * tcpdump release use them, either. - * - * Do *NOT* use these in capture files that you expect anybody not using - * your private versions of capture-file-reading tools to read; in - * particular, do *NOT* use them in products, otherwise you may find that - * people won't be able to use tcpdump, or snort, or Ethereal, or... to - * read capture files from your firewall/intrusion detection/traffic - * monitoring/etc. appliance, or whatever product uses that DLT_ value, - * and you may also find that the developers of those applications will - * not accept patches to let them read those files. - * - * Also, do not use them if somebody might send you a capture using them - * for *their* private type and tools using them for *your* private type - * would have to read them. - * - * Instead, ask "tcpdump-workers@lists.tcpdump.org" for a new DLT_ value, - * as per the comment above, and use the type you're given. - */ -#define DLT_USER0 147 -#define DLT_USER1 148 -#define DLT_USER2 149 -#define DLT_USER3 150 -#define DLT_USER4 151 -#define DLT_USER5 152 -#define DLT_USER6 153 -#define DLT_USER7 154 -#define DLT_USER8 155 -#define DLT_USER9 156 -#define DLT_USER10 157 -#define DLT_USER11 158 -#define DLT_USER12 159 -#define DLT_USER13 160 -#define DLT_USER14 161 -#define DLT_USER15 162 - -/* - * For future use with 802.11 captures - defined by AbsoluteValue - * Systems to store a number of bits of link-layer information - * including radio information: - * - * http://www.shaftnet.org/~pizza/software/capturefrm.txt - * - * but it might be used by some non-AVS drivers now or in the - * future. - */ -#define DLT_IEEE802_11_RADIO_AVS 163 /* 802.11 plus AVS radio header */ - -/* - * Juniper-private data link type, as per request from - * Hannes Gredler <hannes@juniper.net>. The DLT_s are used - * for passing on chassis-internal metainformation such as - * QOS profiles, etc.. - */ -#define DLT_JUNIPER_MONITOR 164 - -/* - * Reserved for BACnet MS/TP. - */ -#define DLT_BACNET_MS_TP 165 - -/* - * Another PPP variant as per request from Karsten Keil <kkeil@suse.de>. - * - * This is used in some OSes to allow a kernel socket filter to distinguish - * between incoming and outgoing packets, on a socket intended to - * supply pppd with outgoing packets so it can do dial-on-demand and - * hangup-on-lack-of-demand; incoming packets are filtered out so they - * don't cause pppd to hold the connection up (you don't want random - * input packets such as port scans, packets from old lost connections, - * etc. to force the connection to stay up). - * - * The first byte of the PPP header (0xff03) is modified to accomodate - * the direction - 0x00 = IN, 0x01 = OUT. - */ -#define DLT_PPP_PPPD 166 - -/* - * Names for backwards compatibility with older versions of some PPP - * software; new software should use DLT_PPP_PPPD. - */ -#define DLT_PPP_WITH_DIRECTION DLT_PPP_PPPD -#define DLT_LINUX_PPP_WITHDIRECTION DLT_PPP_PPPD - -/* - * Juniper-private data link type, as per request from - * Hannes Gredler <hannes@juniper.net>. The DLT_s are used - * for passing on chassis-internal metainformation such as - * QOS profiles, cookies, etc.. - */ -#define DLT_JUNIPER_PPPOE 167 -#define DLT_JUNIPER_PPPOE_ATM 168 - -#define DLT_GPRS_LLC 169 /* GPRS LLC */ -#define DLT_GPF_T 170 /* GPF-T (ITU-T G.7041/Y.1303) */ -#define DLT_GPF_F 171 /* GPF-F (ITU-T G.7041/Y.1303) */ - -/* - * Requested by Oolan Zimmer <oz@gcom.com> for use in Gcom's T1/E1 line - * monitoring equipment. - */ -#define DLT_GCOM_T1E1 172 -#define DLT_GCOM_SERIAL 173 - -/* - * Juniper-private data link type, as per request from - * Hannes Gredler <hannes@juniper.net>. The DLT_ is used - * for internal communication to Physical Interface Cards (PIC) - */ -#define DLT_JUNIPER_PIC_PEER 174 - -/* - * Link types requested by Gregor Maier <gregor@endace.com> of Endace - * Measurement Systems. They add an ERF header (see - * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of - * the link-layer header. - */ -#define DLT_ERF_ETH 175 /* Ethernet */ -#define DLT_ERF_POS 176 /* Packet-over-SONET */ - -/* - * Requested by Daniele Orlandi <daniele@orlandi.com> for raw LAPD - * for vISDN (http://www.orlandi.com/visdn/). Its link-layer header - * includes additional information before the LAPD header, so it's - * not necessarily a generic LAPD header. - */ -#define DLT_LINUX_LAPD 177 - -/* - * Juniper-private data link type, as per request from - * Hannes Gredler <hannes@juniper.net>. - * The DLT_ are used for prepending meta-information - * like interface index, interface name - * before standard Ethernet, PPP, Frelay & C-HDLC Frames - */ -#define DLT_JUNIPER_ETHER 178 -#define DLT_JUNIPER_PPP 179 -#define DLT_JUNIPER_FRELAY 180 -#define DLT_JUNIPER_CHDLC 181 - -/* - * Multi Link Frame Relay (FRF.16) - */ -#define DLT_MFR 182 - -/* - * Juniper-private data link type, as per request from - * Hannes Gredler <hannes@juniper.net>. - * The DLT_ is used for internal communication with a - * voice Adapter Card (PIC) - */ -#define DLT_JUNIPER_VP 183 - -/* - * Arinc 429 frames. - * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>. - * Every frame contains a 32bit A429 label. - * More documentation on Arinc 429 can be found at - * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf - */ -#define DLT_A429 184 - -/* - * Arinc 653 Interpartition Communication messages. - * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>. - * Please refer to the A653-1 standard for more information. - */ -#define DLT_A653_ICM 185 - -/* - * USB packets, beginning with a USB setup header; requested by - * Paolo Abeni <paolo.abeni@email.it>. - */ -#define DLT_USB 186 - -/* - * Bluetooth HCI UART transport layer (part H:4); requested by - * Paolo Abeni. - */ -#define DLT_BLUETOOTH_HCI_H4 187 - -/* - * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz - * <cruz_petagay@bah.com>. - */ -#define DLT_IEEE802_16_MAC_CPS 188 - -/* - * USB packets, beginning with a Linux USB header; requested by - * Paolo Abeni <paolo.abeni@email.it>. - */ -#define DLT_USB_LINUX 189 - -/* - * Controller Area Network (CAN) v. 2.0B packets. - * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>. - * Used to dump CAN packets coming from a CAN Vector board. - * More documentation on the CAN v2.0B frames can be found at - * http://www.can-cia.org/downloads/?269 - */ -#define DLT_CAN20B 190 - -/* - * IEEE 802.15.4, with address fields padded, as is done by Linux - * drivers; requested by Juergen Schimmer. - */ -#define DLT_IEEE802_15_4_LINUX 191 - -/* - * Per Packet Information encapsulated packets. - * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>. - */ -#define DLT_PPI 192 - -/* - * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header; - * requested by Charles Clancy. - */ -#define DLT_IEEE802_16_MAC_CPS_RADIO 193 - -/* - * Juniper-private data link type, as per request from - * Hannes Gredler <hannes@juniper.net>. - * The DLT_ is used for internal communication with a - * integrated service module (ISM). - */ -#define DLT_JUNIPER_ISM 194 - -/* - * IEEE 802.15.4, exactly as it appears in the spec (no padding, no - * nothing); requested by Mikko Saarnivala <mikko.saarnivala@sensinode.com>. - */ -#define DLT_IEEE802_15_4 195 - -/* - * Various link-layer types, with a pseudo-header, for SITA - * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com). - */ -#define DLT_SITA 196 - -/* - * Various link-layer types, with a pseudo-header, for Endace DAG cards; - * encapsulates Endace ERF records. Requested by Stephen Donnelly - * <stephen@endace.com>. - */ -#define DLT_ERF 197 - -/* - * Special header prepended to Ethernet packets when capturing from a - * u10 Networks board. Requested by Phil Mulholland - * <phil@u10networks.com>. - */ -#define DLT_RAIF1 198 - -/* - * IPMB packet for IPMI, beginning with the I2C slave address, followed - * by the netFn and LUN, etc.. Requested by Chanthy Toeung - * <chanthy.toeung@ca.kontron.com>. - */ -#define DLT_IPMB 199 - -/* - * Juniper-private data link type, as per request from - * Hannes Gredler <hannes@juniper.net>. - * The DLT_ is used for capturing data on a secure tunnel interface. - */ -#define DLT_JUNIPER_ST 200 - -/* - * Bluetooth HCI UART transport layer (part H:4), with pseudo-header - * that includes direction information; requested by Paolo Abeni. - */ -#define DLT_BLUETOOTH_HCI_H4_WITH_PHDR 201 - -/* - * AX.25 packet with a 1-byte KISS header; see - * - * http://www.ax25.net/kiss.htm - * - * as per Richard Stearn <richard@rns-stearn.demon.co.uk>. - */ -#define DLT_AX25_KISS 202 - -/* - * LAPD packets from an ISDN channel, starting with the address field, - * with no pseudo-header. - * Requested by Varuna De Silva <varunax@gmail.com>. - */ -#define DLT_LAPD 203 - -/* - * Variants of various link-layer headers, with a one-byte direction - * pseudo-header prepended - zero means "received by this host", - * non-zero (any non-zero value) means "sent by this host" - as per - * Will Barker <w.barker@zen.co.uk>. - */ -#define DLT_PPP_WITH_DIR 204 /* PPP - don't confuse with DLT_PPP_WITH_DIRECTION */ -#define DLT_C_HDLC_WITH_DIR 205 /* Cisco HDLC */ -#define DLT_FRELAY_WITH_DIR 206 /* Frame Relay */ -#define DLT_LAPB_WITH_DIR 207 /* LAPB */ - -/* - * 208 is reserved for an as-yet-unspecified proprietary link-layer - * type, as requested by Will Barker. - */ - -/* - * IPMB with a Linux-specific pseudo-header; as requested by Alexey Neyman - * <avn@pigeonpoint.com>. - */ -#define DLT_IPMB_LINUX 209 - -/* - * FlexRay automotive bus - http://www.flexray.com/ - as requested - * by Hannes Kaelber <hannes.kaelber@x2e.de>. - */ -#define DLT_FLEXRAY 210 - -/* - * Media Oriented Systems Transport (MOST) bus for multimedia - * transport - http://www.mostcooperation.com/ - as requested - * by Hannes Kaelber <hannes.kaelber@x2e.de>. - */ -#define DLT_MOST 211 - -/* - * Local Interconnect Network (LIN) bus for vehicle networks - - * http://www.lin-subbus.org/ - as requested by Hannes Kaelber - * <hannes.kaelber@x2e.de>. - */ -#define DLT_LIN 212 - -/* - * X2E-private data link type used for serial line capture, - * as requested by Hannes Kaelber <hannes.kaelber@x2e.de>. - */ -#define DLT_X2E_SERIAL 213 - -/* - * X2E-private data link type used for the Xoraya data logger - * family, as requested by Hannes Kaelber <hannes.kaelber@x2e.de>. - */ -#define DLT_X2E_XORAYA 214 - -/* - * IEEE 802.15.4, exactly as it appears in the spec (no padding, no - * nothing), but with the PHY-level data for non-ASK PHYs (4 octets - * of 0 as preamble, one octet of SFD, one octet of frame length+ - * reserved bit, and then the MAC-layer data, starting with the - * frame control field). - * - * Requested by Max Filippov <jcmvbkbc@gmail.com>. - */ -#define DLT_IEEE802_15_4_NONASK_PHY 215 - - -/* - * DLT and savefile link type values are split into a class and - * a member of that class. A class value of 0 indicates a regular - * DLT_/LINKTYPE_ value. - */ -#define DLT_CLASS(x) ((x) & 0x03ff0000) - -/* - * NetBSD-specific generic "raw" link type. The class value indicates - * that this is the generic raw type, and the lower 16 bits are the - * address family we're dealing with. Those values are NetBSD-specific; - * do not assume that they correspond to AF_ values for your operating - * system. - */ -#define DLT_CLASS_NETBSD_RAWAF 0x02240000 -#define DLT_NETBSD_RAWAF(af) (DLT_CLASS_NETBSD_RAWAF | (af)) -#define DLT_NETBSD_RAWAF_AF(x) ((x) & 0x0000ffff) -#define DLT_IS_NETBSD_RAWAF(x) (DLT_CLASS(x) == DLT_CLASS_NETBSD_RAWAF) - - -/* - * The instruction encodings. - */ -/* instruction classes */ -#define BPF_CLASS(code) ((code) & 0x07) -#define BPF_LD 0x00 -#define BPF_LDX 0x01 -#define BPF_ST 0x02 -#define BPF_STX 0x03 -#define BPF_ALU 0x04 -#define BPF_JMP 0x05 -#define BPF_RET 0x06 -#define BPF_MISC 0x07 - -/* ld/ldx fields */ -#define BPF_SIZE(code) ((code) & 0x18) -#define BPF_W 0x00 -#define BPF_H 0x08 -#define BPF_B 0x10 -#define BPF_MODE(code) ((code) & 0xe0) -#define BPF_IMM 0x00 -#define BPF_ABS 0x20 -#define BPF_IND 0x40 -#define BPF_MEM 0x60 -#define BPF_LEN 0x80 -#define BPF_MSH 0xa0 - -/* alu/jmp fields */ -#define BPF_OP(code) ((code) & 0xf0) -#define BPF_ADD 0x00 -#define BPF_SUB 0x10 -#define BPF_MUL 0x20 -#define BPF_DIV 0x30 -#define BPF_OR 0x40 -#define BPF_AND 0x50 -#define BPF_LSH 0x60 -#define BPF_RSH 0x70 -#define BPF_NEG 0x80 -#define BPF_JA 0x00 -#define BPF_JEQ 0x10 -#define BPF_JGT 0x20 -#define BPF_JGE 0x30 -#define BPF_JSET 0x40 -#define BPF_SRC(code) ((code) & 0x08) -#define BPF_K 0x00 -#define BPF_X 0x08 - -/* ret - BPF_K and BPF_X also apply */ -#define BPF_RVAL(code) ((code) & 0x18) -#define BPF_A 0x10 - -/* misc */ -#define BPF_MISCOP(code) ((code) & 0xf8) -#define BPF_TAX 0x00 -#define BPF_TXA 0x80 - -/* - * The instruction data structure. - */ -struct bpf_insn { - u_short code; - u_char jt; - u_char jf; - bpf_u_int32 k; -}; - -/* - * Macros for insn array initializers. - */ -#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k } -#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k } - -#if __STDC__ || defined(__cplusplus) -extern int bpf_validate(const struct bpf_insn *, int); -extern u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int); -#else -extern int bpf_validate(); -extern u_int bpf_filter(); -#endif - -/* - * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST). - */ -#define BPF_MEMWORDS 16 - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/namedb.h b/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/namedb.h deleted file mode 100644 index 9002c7509..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/namedb.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (c) 1994, 1996 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the Computer Systems - * Engineering Group at Lawrence Berkeley Laboratory. - * 4. Neither the name of the University nor of the Laboratory may be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#) $Header: /tcpdump/master/libpcap/pcap/namedb.h,v 1.1 2006/10/04 18:09:22 guy Exp $ (LBL) - */ - -#ifndef lib_pcap_namedb_h -#define lib_pcap_namedb_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * As returned by the pcap_next_etherent() - * XXX this stuff doesn't belong in this interface, but this - * library already must do name to address translation, so - * on systems that don't have support for /etc/ethers, we - * export these hooks since they'll - */ -struct pcap_etherent { - u_char addr[6]; - char name[122]; -}; -#ifndef PCAP_ETHERS_FILE -#define PCAP_ETHERS_FILE "/etc/ethers" -#endif -struct pcap_etherent *pcap_next_etherent(FILE *); -u_char *pcap_ether_hostton(const char*); -u_char *pcap_ether_aton(const char *); - -bpf_u_int32 **pcap_nametoaddr(const char *); -#ifdef INET6 -struct addrinfo *pcap_nametoaddrinfo(const char *); -#endif -bpf_u_int32 pcap_nametonetaddr(const char *); - -int pcap_nametoport(const char *, int *, int *); -int pcap_nametoportrange(const char *, int *, int *, int *); -int pcap_nametoproto(const char *); -int pcap_nametoeproto(const char *); -int pcap_nametollc(const char *); -/* - * If a protocol is unknown, PROTO_UNDEF is returned. - * Also, pcap_nametoport() returns the protocol along with the port number. - * If there are ambiguous entried in /etc/services (i.e. domain - * can be either tcp or udp) PROTO_UNDEF is returned. - */ -#define PROTO_UNDEF -1 - -/* XXX move these to pcap-int.h? */ -int __pcap_atodn(const char *, bpf_u_int32 *); -int __pcap_atoin(const char *, bpf_u_int32 *); -u_short __pcap_nametodnaddr(const char *); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/pcap.h b/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/pcap.h deleted file mode 100644 index ad8fc40ac..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/pcap.h +++ /dev/null @@ -1,407 +0,0 @@ -/* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */ -/* - * Copyright (c) 1993, 1994, 1995, 1996, 1997 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the Computer Systems - * Engineering Group at Lawrence Berkeley Laboratory. - * 4. Neither the name of the University nor of the Laboratory may be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#) $Header: /tcpdump/master/libpcap/pcap/pcap.h,v 1.4.2.11 2008-10-06 15:38:39 gianluca Exp $ (LBL) - */ - -#ifndef lib_pcap_pcap_h -#define lib_pcap_pcap_h - -#if defined(WIN32) - #include <pcap-stdinc.h> -#elif defined(MSDOS) - #include <sys/types.h> - #include <sys/socket.h> /* u_int, u_char etc. */ -#else /* UN*X */ - #include <sys/types.h> - #include <sys/time.h> -#endif /* WIN32/MSDOS/UN*X */ - -#ifndef PCAP_DONT_INCLUDE_PCAP_BPF_H -#include <pcap/bpf.h> -#endif - -#include <stdio.h> - -#ifdef HAVE_REMOTE - // We have to define the SOCKET here, although it has been defined in sockutils.h - // This is to avoid the distribution of the 'sockutils.h' file around - // (for example in the WinPcap developer's pack) - #ifndef SOCKET - #ifdef WIN32 - #define SOCKET unsigned int - #else - #define SOCKET int - #endif - #endif -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -#define PCAP_VERSION_MAJOR 2 -#define PCAP_VERSION_MINOR 4 - -#define PCAP_ERRBUF_SIZE 256 - -/* - * Compatibility for systems that have a bpf.h that - * predates the bpf typedefs for 64-bit support. - */ -#if BPF_RELEASE - 0 < 199406 -typedef int bpf_int32; -typedef u_int bpf_u_int32; -#endif - -typedef struct pcap pcap_t; -typedef struct pcap_dumper pcap_dumper_t; -typedef struct pcap_if pcap_if_t; -typedef struct pcap_addr pcap_addr_t; - -/* - * The first record in the file contains saved values for some - * of the flags used in the printout phases of tcpdump. - * Many fields here are 32 bit ints so compilers won't insert unwanted - * padding; these files need to be interchangeable across architectures. - * - * Do not change the layout of this structure, in any way (this includes - * changes that only affect the length of fields in this structure). - * - * Also, do not change the interpretation of any of the members of this - * structure, in any way (this includes using values other than - * LINKTYPE_ values, as defined in "savefile.c", in the "linktype" - * field). - * - * Instead: - * - * introduce a new structure for the new format, if the layout - * of the structure changed; - * - * send mail to "tcpdump-workers@lists.tcpdump.org", requesting - * a new magic number for your new capture file format, and, when - * you get the new magic number, put it in "savefile.c"; - * - * use that magic number for save files with the changed file - * header; - * - * make the code in "savefile.c" capable of reading files with - * the old file header as well as files with the new file header - * (using the magic number to determine the header format). - * - * Then supply the changes as a patch at - * - * http://sourceforge.net/projects/libpcap/ - * - * so that future versions of libpcap and programs that use it (such as - * tcpdump) will be able to read your new capture file format. - */ -struct pcap_file_header { - bpf_u_int32 magic; - u_short version_major; - u_short version_minor; - bpf_int32 thiszone; /* gmt to local correction */ - bpf_u_int32 sigfigs; /* accuracy of timestamps */ - bpf_u_int32 snaplen; /* max length saved portion of each pkt */ - bpf_u_int32 linktype; /* data link type (LINKTYPE_*) */ -}; - -/* - * Macros for the value returned by pcap_datalink_ext(). - * - * If LT_FCS_LENGTH_PRESENT(x) is true, the LT_FCS_LENGTH(x) macro - * gives the FCS length of packets in the capture. - */ -#define LT_FCS_LENGTH_PRESENT(x) ((x) & 0x04000000) -#define LT_FCS_LENGTH(x) (((x) & 0xF0000000) >> 28) -#define LT_FCS_DATALINK_EXT(x) ((((x) & 0xF) << 28) | 0x04000000) - -typedef enum { - PCAP_D_INOUT = 0, - PCAP_D_IN, - PCAP_D_OUT -} pcap_direction_t; - -/* - * Generic per-packet information, as supplied by libpcap. - * - * The time stamp can and should be a "struct timeval", regardless of - * whether your system supports 32-bit tv_sec in "struct timeval", - * 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit - * and 64-bit applications. The on-disk format of savefiles uses 32-bit - * tv_sec (and tv_usec); this structure is irrelevant to that. 32-bit - * and 64-bit versions of libpcap, even if they're on the same platform, - * should supply the appropriate version of "struct timeval", even if - * that's not what the underlying packet capture mechanism supplies. - */ -struct pcap_pkthdr { - struct timeval ts; /* time stamp */ - bpf_u_int32 caplen; /* length of portion present */ - bpf_u_int32 len; /* length this packet (off wire) */ -}; - -/* - * As returned by the pcap_stats() - */ -struct pcap_stat { - u_int ps_recv; /* number of packets received */ - u_int ps_drop; /* number of packets dropped */ - u_int ps_ifdrop; /* drops by interface XXX not yet supported */ -#ifdef HAVE_REMOTE - u_int ps_capt; /* number of packets that are received by the application; please get rid off the Win32 ifdef */ - u_int ps_sent; /* number of packets sent by the server on the network */ - u_int ps_netdrop; /* number of packets lost on the network */ -#endif /* HAVE_REMOTE */ -}; - -#ifdef MSDOS -/* - * As returned by the pcap_stats_ex() - */ -struct pcap_stat_ex { - u_long rx_packets; /* total packets received */ - u_long tx_packets; /* total packets transmitted */ - u_long rx_bytes; /* total bytes received */ - u_long tx_bytes; /* total bytes transmitted */ - u_long rx_errors; /* bad packets received */ - u_long tx_errors; /* packet transmit problems */ - u_long rx_dropped; /* no space in Rx buffers */ - u_long tx_dropped; /* no space available for Tx */ - u_long multicast; /* multicast packets received */ - u_long collisions; - - /* detailed rx_errors: */ - u_long rx_length_errors; - u_long rx_over_errors; /* receiver ring buff overflow */ - u_long rx_crc_errors; /* recv'd pkt with crc error */ - u_long rx_frame_errors; /* recv'd frame alignment error */ - u_long rx_fifo_errors; /* recv'r fifo overrun */ - u_long rx_missed_errors; /* recv'r missed packet */ - - /* detailed tx_errors */ - u_long tx_aborted_errors; - u_long tx_carrier_errors; - u_long tx_fifo_errors; - u_long tx_heartbeat_errors; - u_long tx_window_errors; - }; -#endif - -/* - * Item in a list of interfaces. - */ -struct pcap_if { - struct pcap_if *next; - char *name; /* name to hand to "pcap_open_live()" */ - char *description; /* textual description of interface, or NULL */ - struct pcap_addr *addresses; - bpf_u_int32 flags; /* PCAP_IF_ interface flags */ -}; - -#define PCAP_IF_LOOPBACK 0x00000001 /* interface is loopback */ - -/* - * Representation of an interface address. - */ -struct pcap_addr { - struct pcap_addr *next; - struct sockaddr *addr; /* address */ - struct sockaddr *netmask; /* netmask for that address */ - struct sockaddr *broadaddr; /* broadcast address for that address */ - struct sockaddr *dstaddr; /* P2P destination address for that address */ -}; - -typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *, - const u_char *); - -/* - * Error codes for the pcap API. - * These will all be negative, so you can check for the success or - * failure of a call that returns these codes by checking for a - * negative value. - */ -#define PCAP_ERROR -1 /* generic error code */ -#define PCAP_ERROR_BREAK -2 /* loop terminated by pcap_breakloop */ -#define PCAP_ERROR_NOT_ACTIVATED -3 /* the capture needs to be activated */ -#define PCAP_ERROR_ACTIVATED -4 /* the operation can't be performed on already activated captures */ -#define PCAP_ERROR_NO_SUCH_DEVICE -5 /* no such device exists */ -#define PCAP_ERROR_RFMON_NOTSUP -6 /* this device doesn't support rfmon (monitor) mode */ -#define PCAP_ERROR_NOT_RFMON -7 /* operation supported only in monitor mode */ -#define PCAP_ERROR_PERM_DENIED -8 /* no permission to open the device */ -#define PCAP_ERROR_IFACE_NOT_UP -9 /* interface isn't up */ - -/* - * Warning codes for the pcap API. - * These will all be positive and non-zero, so they won't look like - * errors. - */ -#define PCAP_WARNING 1 /* generic warning code */ -#define PCAP_WARNING_PROMISC_NOTSUP 2 /* this device doesn't support promiscuous mode */ - -char *pcap_lookupdev(char *); -int pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *); - -pcap_t *pcap_create(const char *, char *); -int pcap_set_snaplen(pcap_t *, int); -int pcap_set_promisc(pcap_t *, int); -int pcap_can_set_rfmon(pcap_t *); -int pcap_set_rfmon(pcap_t *, int); -int pcap_set_timeout(pcap_t *, int); -int pcap_set_buffer_size(pcap_t *, int); -int pcap_activate(pcap_t *); - -pcap_t *pcap_open_live(const char *, int, int, int, char *); -pcap_t *pcap_open_dead(int, int); -pcap_t *pcap_open_offline(const char *, char *); -#if defined(WIN32) -pcap_t *pcap_hopen_offline(intptr_t, char *); -#if !defined(LIBPCAP_EXPORTS) -#define pcap_fopen_offline(f,b) \ - pcap_hopen_offline(_get_osfhandle(_fileno(f)), b) -#else /*LIBPCAP_EXPORTS*/ -static pcap_t *pcap_fopen_offline(FILE *, char *); -#endif -#else /*WIN32*/ -pcap_t *pcap_fopen_offline(FILE *, char *); -#endif /*WIN32*/ - -void pcap_close(pcap_t *); -int pcap_loop(pcap_t *, int, pcap_handler, u_char *); -int pcap_dispatch(pcap_t *, int, pcap_handler, u_char *); -const u_char* - pcap_next(pcap_t *, struct pcap_pkthdr *); -int pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **); -void pcap_breakloop(pcap_t *); -int pcap_stats(pcap_t *, struct pcap_stat *); -int pcap_setfilter(pcap_t *, struct bpf_program *); -int pcap_setdirection(pcap_t *, pcap_direction_t); -int pcap_getnonblock(pcap_t *, char *); -int pcap_setnonblock(pcap_t *, int, char *); -int pcap_inject(pcap_t *, const void *, size_t); -int pcap_sendpacket(pcap_t *, const u_char *, int); -const char *pcap_statustostr(int); -const char *pcap_strerror(int); -char *pcap_geterr(pcap_t *); -void pcap_perror(pcap_t *, char *); -int pcap_compile(pcap_t *, struct bpf_program *, const char *, int, - bpf_u_int32); -int pcap_compile_nopcap(int, int, struct bpf_program *, - const char *, int, bpf_u_int32); -void pcap_freecode(struct bpf_program *); -int pcap_offline_filter(struct bpf_program *, const struct pcap_pkthdr *, - const u_char *); -int pcap_datalink(pcap_t *); -int pcap_datalink_ext(pcap_t *); -int pcap_list_datalinks(pcap_t *, int **); -int pcap_set_datalink(pcap_t *, int); -void pcap_free_datalinks(int *); -int pcap_datalink_name_to_val(const char *); -const char *pcap_datalink_val_to_name(int); -const char *pcap_datalink_val_to_description(int); -int pcap_snapshot(pcap_t *); -int pcap_is_swapped(pcap_t *); -int pcap_major_version(pcap_t *); -int pcap_minor_version(pcap_t *); - -/* XXX */ -FILE *pcap_file(pcap_t *); -int pcap_fileno(pcap_t *); - -pcap_dumper_t *pcap_dump_open(pcap_t *, const char *); -pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp); -FILE *pcap_dump_file(pcap_dumper_t *); -long pcap_dump_ftell(pcap_dumper_t *); -int pcap_dump_flush(pcap_dumper_t *); -void pcap_dump_close(pcap_dumper_t *); -void pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *); - -int pcap_findalldevs(pcap_if_t **, char *); -void pcap_freealldevs(pcap_if_t *); - -const char *pcap_lib_version(void); - -/* XXX this guy lives in the bpf tree */ -u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int); -int bpf_validate(const struct bpf_insn *f, int len); -char *bpf_image(const struct bpf_insn *, int); -void bpf_dump(const struct bpf_program *, int); - -#if defined(WIN32) - -/* - * Win32 definitions - */ - -int pcap_setbuff(pcap_t *p, int dim); -int pcap_setmode(pcap_t *p, int mode); -int pcap_setmintocopy(pcap_t *p, int size); - -#ifdef WPCAP -/* Include file with the wpcap-specific extensions */ -#include <Win32-Extensions.h> -#endif /* WPCAP */ - -#define MODE_CAPT 0 -#define MODE_STAT 1 -#define MODE_MON 2 - -#elif defined(MSDOS) - -/* - * MS-DOS definitions - */ - -int pcap_stats_ex (pcap_t *, struct pcap_stat_ex *); -void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait); -u_long pcap_mac_packets (void); - -#else /* UN*X */ - -/* - * UN*X definitions - */ - -int pcap_get_selectable_fd(pcap_t *); - -#endif /* WIN32/MSDOS/UN*X */ - -#ifdef HAVE_REMOTE -/* Includes most of the public stuff that is needed for the remote capture */ -#include <remote-ext.h> -#endif /* HAVE_REMOTE */ - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/sll.h b/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/sll.h deleted file mode 100644 index e9d5452af..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/sll.h +++ /dev/null @@ -1,129 +0,0 @@ -/*- - * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from the Stanford/CMU enet packet filter, - * (net/enet.c) distributed as part of 4.3BSD, and code contributed - * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence - * Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#) $Header: /tcpdump/master/libpcap/pcap/sll.h,v 1.2.2.1 2008-05-30 01:36:06 guy Exp $ (LBL) - */ - -/* - * For captures on Linux cooked sockets, we construct a fake header - * that includes: - * - * a 2-byte "packet type" which is one of: - * - * LINUX_SLL_HOST packet was sent to us - * LINUX_SLL_BROADCAST packet was broadcast - * LINUX_SLL_MULTICAST packet was multicast - * LINUX_SLL_OTHERHOST packet was sent to somebody else - * LINUX_SLL_OUTGOING packet was sent *by* us; - * - * a 2-byte Ethernet protocol field; - * - * a 2-byte link-layer type; - * - * a 2-byte link-layer address length; - * - * an 8-byte source link-layer address, whose actual length is - * specified by the previous value. - * - * All fields except for the link-layer address are in network byte order. - * - * DO NOT change the layout of this structure, or change any of the - * LINUX_SLL_ values below. If you must change the link-layer header - * for a "cooked" Linux capture, introduce a new DLT_ type (ask - * "tcpdump-workers@lists.tcpdump.org" for one, so that you don't give it - * a value that collides with a value already being used), and use the - * new header in captures of that type, so that programs that can - * handle DLT_LINUX_SLL captures will continue to handle them correctly - * without any change, and so that capture files with different headers - * can be told apart and programs that read them can dissect the - * packets in them. - */ - -#ifndef lib_pcap_sll_h -#define lib_pcap_sll_h - -/* - * A DLT_LINUX_SLL fake link-layer header. - */ -#define SLL_HDR_LEN 16 /* total header length */ -#define SLL_ADDRLEN 8 /* length of address field */ - -struct sll_header { - u_int16_t sll_pkttype; /* packet type */ - u_int16_t sll_hatype; /* link-layer address type */ - u_int16_t sll_halen; /* link-layer address length */ - u_int8_t sll_addr[SLL_ADDRLEN]; /* link-layer address */ - u_int16_t sll_protocol; /* protocol */ -}; - -/* - * The LINUX_SLL_ values for "sll_pkttype"; these correspond to the - * PACKET_ values on Linux, but are defined here so that they're - * available even on systems other than Linux, and so that they - * don't change even if the PACKET_ values change. - */ -#define LINUX_SLL_HOST 0 -#define LINUX_SLL_BROADCAST 1 -#define LINUX_SLL_MULTICAST 2 -#define LINUX_SLL_OTHERHOST 3 -#define LINUX_SLL_OUTGOING 4 - -/* - * The LINUX_SLL_ values for "sll_protocol"; these correspond to the - * ETH_P_ values on Linux, but are defined here so that they're - * available even on systems other than Linux. We assume, for now, - * that the ETH_P_ values won't change in Linux; if they do, then: - * - * if we don't translate them in "pcap-linux.c", capture files - * won't necessarily be readable if captured on a system that - * defines ETH_P_ values that don't match these values; - * - * if we do translate them in "pcap-linux.c", that makes life - * unpleasant for the BPF code generator, as the values you test - * for in the kernel aren't the values that you test for when - * reading a capture file, so the fixup code run on BPF programs - * handed to the kernel ends up having to do more work. - * - * Add other values here as necessary, for handling packet types that - * might show up on non-Ethernet, non-802.x networks. (Not all the ones - * in the Linux "if_ether.h" will, I suspect, actually show up in - * captures.) - */ -#define LINUX_SLL_P_802_3 0x0001 /* Novell 802.3 frames without 802.2 LLC header */ -#define LINUX_SLL_P_802_2 0x0004 /* 802.2 frames (not D/I/X Ethernet) */ - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/usb.h b/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/usb.h deleted file mode 100644 index adcd19c05..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/usb.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2006 Paolo Abeni (Italy) - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote - * products derived from this software without specific prior written - * permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Basic USB data struct - * By Paolo Abeni <paolo.abeni@email.it> - * - * @(#) $Header: /tcpdump/master/libpcap/pcap/usb.h,v 1.6 2007/09/22 02:06:08 guy Exp $ - */ - -#ifndef _PCAP_USB_STRUCTS_H__ -#define _PCAP_USB_STRUCTS_H__ - -/* - * possible transfer mode - */ -#define URB_TRANSFER_IN 0x80 -#define URB_ISOCHRONOUS 0x0 -#define URB_INTERRUPT 0x1 -#define URB_CONTROL 0x2 -#define URB_BULK 0x3 - -/* - * possible event type - */ -#define URB_SUBMIT 'S' -#define URB_COMPLETE 'C' -#define URB_ERROR 'E' - -/* - * USB setup header as defined in USB specification. - * Appears at the front of each packet in DLT_USB captures. - */ -typedef struct _usb_setup { - u_int8_t bmRequestType; - u_int8_t bRequest; - u_int16_t wValue; - u_int16_t wIndex; - u_int16_t wLength; -} pcap_usb_setup; - - -/* - * Header prepended by linux kernel to each event. - * Appears at the front of each packet in DLT_USB_LINUX captures. - */ -typedef struct _usb_header { - u_int64_t id; - u_int8_t event_type; - u_int8_t transfer_type; - u_int8_t endpoint_number; - u_int8_t device_address; - u_int16_t bus_id; - char setup_flag;/*if !=0 the urb setup header is not present*/ - char data_flag; /*if !=0 no urb data is present*/ - int64_t ts_sec; - int32_t ts_usec; - int32_t status; - u_int32_t urb_len; - u_int32_t data_len; /* amount of urb data really present in this event*/ - pcap_usb_setup setup; -} pcap_usb_header; - - -#endif diff --git a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/vlan.h b/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/vlan.h deleted file mode 100644 index b0cb7949b..000000000 --- a/FreeRTOS-Plus/Demo/FreeRTOS_IoT_Libraries/mqtt/WinPCap/pcap/vlan.h +++ /dev/null @@ -1,46 +0,0 @@ -/*- - * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#) $Header: /tcpdump/master/libpcap/pcap/vlan.h,v 1.1.2.2 2008-08-06 07:45:59 guy Exp $ - */ - -#ifndef lib_pcap_vlan_h -#define lib_pcap_vlan_h - -struct vlan_tag { - u_int16_t vlan_tpid; /* ETH_P_8021Q */ - u_int16_t vlan_tci; /* VLAN TCI */ -}; - -#define VLAN_TAG_LEN 4 - -#endif |