diff options
Diffstat (limited to 'FreeRTOS/Demo/CORTEX_MPU_LPC54018_MCUXpresso/NXP_Code/board/board.h')
| -rw-r--r-- | FreeRTOS/Demo/CORTEX_MPU_LPC54018_MCUXpresso/NXP_Code/board/board.h | 232 |
1 files changed, 232 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/CORTEX_MPU_LPC54018_MCUXpresso/NXP_Code/board/board.h b/FreeRTOS/Demo/CORTEX_MPU_LPC54018_MCUXpresso/NXP_Code/board/board.h new file mode 100644 index 000000000..ff1907809 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_MPU_LPC54018_MCUXpresso/NXP_Code/board/board.h @@ -0,0 +1,232 @@ +/*
+ * Copyright (c) 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016-2018 NXP
+ * All rights reserved.
+ *
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#include "clock_config.h"
+#include "fsl_common.h"
+#include "fsl_gpio.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+/*! @brief The board name */
+#define BOARD_NAME "LPC54018-IoT-Module"
+
+#define BOARD_EXTCLKINRATE (0)
+
+/*! @brief The UART to use for debug messages. */
+/* TODO: rename UART to USART */
+#ifndef BOARD_DEBUG_UART_TYPE
+#define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
+#endif
+
+#define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0
+#define BOARD_DEBUG_UART_INSTANCE 0U
+#define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetFlexCommClkFreq(0U)
+#define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_FLEXCOMM0
+#define BOARD_DEBUG_UART_RST kFC0_RST_SHIFT_RSTn
+#define BOARD_UART_IRQ_HANDLER FLEXCOMM0_IRQHandler
+#define BOARD_UART_IRQ FLEXCOMM0_IRQn
+/* TODO: obsolete */
+#define BOARD_DEBUG_SPI_CLK_FREQ 12000000
+
+#ifndef BOARD_DEBUG_UART_BAUDRATE
+#define BOARD_DEBUG_UART_BAUDRATE 115200
+#endif /* BOARD_DEBUG_UART_BAUDRATE */
+
+#define BOARD_ACCEL_I2C_BASEADDR I2C2
+#define BOARD_ACCEL_I2C_CLOCK_FREQ 12000000
+
+#define BOARD_CODEC_I2C_BASEADDR I2C2
+#define BOARD_CODEC_I2C_INSTANCE 2U
+#define BOARD_CODEC_I2C_CLOCK_FREQ 12000000
+
+/*! @brief The ENET PHY address. */
+#define BOARD_ENET0_PHY_ADDRESS (0x00U) /* Phy address of enet port 0. */
+
+#ifndef BOARD_LED1_GPIO
+#define BOARD_LED1_GPIO GPIO
+#endif
+#define BOARD_LED1_GPIO_PORT 3U
+#ifndef BOARD_LED1_GPIO_PIN
+#define BOARD_LED1_GPIO_PIN 14U
+#endif
+
+#ifndef BOARD_LED2_GPIO
+#define BOARD_LED2_GPIO GPIO
+#endif
+#define BOARD_LED2_GPIO_PORT 3U
+#ifndef BOARD_LED2_GPIO_PIN
+#define BOARD_LED2_GPIO_PIN 3U
+#endif
+#ifndef BOARD_LED3_GPIO
+#define BOARD_LED3_GPIO GPIO
+#endif
+#define BOARD_LED3_GPIO_PORT 3U
+#ifndef BOARD_LED3_GPIO_PIN
+#define BOARD_LED3_GPIO_PIN 13U
+#endif
+
+#ifndef BOARD_SW1_GPIO
+#define BOARD_SW1_GPIO GPIO
+#endif
+#define BOARD_SW1_GPIO_PORT 0U
+#ifndef BOARD_SW1_GPIO_PIN
+#define BOARD_SW1_GPIO_PIN 4U
+#endif
+#define BOARD_SW1_NAME "SW1"
+#define BOARD_SW3_IRQ PIN_INT0_IRQn
+#define BOARD_SW3_IRQ_HANDLER PIN_INT0_IRQHandler
+
+#ifndef BOARD_SW2_GPIO
+#define BOARD_SW2_GPIO GPIO
+#endif
+#define BOARD_SW2_GPIO_PORT 0U
+#ifndef BOARD_SW2_GPIO_PIN
+#define BOARD_SW2_GPIO_PIN 6U
+#endif
+#define BOARD_SW2_NAME "SW2"
+#define BOARD_SW2_IRQ PIN_INT0_IRQn
+#define BOARD_SW2_IRQ_HANDLER PIN_INT0_IRQHandler
+
+#ifndef BOARD_SW3_GPIO
+#define BOARD_SW3_GPIO GPIO
+#endif
+#define BOARD_SW3_GPIO_PORT 0U
+#ifndef BOARD_SW3_GPIO_PIN
+#define BOARD_SW3_GPIO_PIN 5U
+#endif
+#define BOARD_SW3_NAME "SW3"
+#define BOARD_SW3_IRQ PIN_INT0_IRQn
+#define BOARD_SW3_IRQ_HANDLER PIN_INT0_IRQHandler
+#define BOARD_SW3_GPIO_PININT_INDEX 0
+
+#ifndef BOARD_SW4_GPIO
+#define BOARD_SW4_GPIO GPIO
+#endif
+#ifndef BOARD_SW4_GPIO_PORT
+#define BOARD_SW4_GPIO_PORT 0U
+#endif
+#ifndef BOARD_SW4_GPIO_PIN
+#define BOARD_SW4_GPIO_PIN 4U
+#endif
+#define BOARD_SW4_NAME "SW4"
+#define BOARD_SW4_IRQ PIN_INT0_IRQn
+#define BOARD_SW4_IRQ_HANDLER PIN_INT0_IRQHandler
+#define BOARD_SW4_GPIO_PININT_INDEX 0
+
+#ifndef BOARD_SW5_GPIO
+#define BOARD_SW5_GPIO GPIO
+#endif
+#ifndef BOARD_SW5_GPIO_PORT
+#define BOARD_SW5_GPIO_PORT 1U
+#endif
+#ifndef BOARD_SW5_GPIO_PIN
+#define BOARD_SW5_GPIO_PIN 1U
+#endif
+#define BOARD_SW5_NAME "SW5"
+#define BOARD_SW5_IRQ PIN_INT1_IRQn
+#define BOARD_SW5_IRQ_HANDLER PIN_INT1_IRQHandler
+#define BOARD_SW5_GPIO_PININT_INDEX 0
+
+#define BOARD_SDIF_BASEADDR SDIF
+#define BOARD_SDIF_CLK_FREQ CLOCK_GetSdioClkFreq()
+#define BOARD_SDIF_CLK_ATTACH kMAIN_CLK_to_SDIO_CLK
+#define BOARD_SDIF_IRQ SDIO_IRQn
+
+#define BOARD_MMC_VCC_SUPPLY kMMC_VoltageWindows270to360
+#define BOARD_SD_CARD_DETECT_PIN 10
+#define BOARD_SD_CARD_DETECT_PORT 2
+#define BOARD_SD_CARD_DETECT_GPIO GPIO
+#define BOARD_SD_DETECT_TYPE kSDMMCHOST_DetectCardByHostCD
+
+#define BOARD_SDIF_CD_GPIO_INIT() \
+ { \
+ CLOCK_EnableClock(kCLOCK_Gpio2); \
+ GPIO_PinInit(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN, \
+ &(gpio_pin_config_t){kGPIO_DigitalInput, 0U}); \
+ }
+#define BOARD_SDIF_CD_STATUS() \
+ GPIO_PinRead(BOARD_SD_CARD_DETECT_GPIO, BOARD_SD_CARD_DETECT_PORT, BOARD_SD_CARD_DETECT_PIN)
+
+/* Board led color mapping */
+#define LOGIC_LED_ON 0U
+#define LOGIC_LED_OFF 1U
+
+#define LED1_INIT(output) \
+ GPIO_PinInit(BOARD_LED1_GPIO, BOARD_LED1_GPIO_PORT, BOARD_LED1_GPIO_PIN, \
+ &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED1 */
+#define LED1_ON() \
+ GPIO_PortClear(BOARD_LED1_GPIO, BOARD_LED1_GPIO_PORT, 1U << BOARD_LED1_GPIO_PIN) /*!< Turn on target LED1 */
+#define LED1_OFF() \
+ GPIO_PortSet(BOARD_LED1_GPIO, BOARD_LED1_GPIO_PORT, 1U << BOARD_LED1_GPIO_PIN) /*!< Turn off target LED1 */
+#define LED1_TOGGLE() \
+ GPIO_PortToggle(BOARD_LED1_GPIO, BOARD_LED1_GPIO_PORT, 1U << BOARD_LED1_GPIO_PIN) /*!< Toggle on target LED1 */
+#define LED2_INIT(output) \
+ GPIO_PinInit(BOARD_LED2_GPIO, BOARD_LED2_GPIO_PORT, BOARD_LED2_GPIO_PIN, \
+ &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED2 */
+#define LED2_ON() \
+ GPIO_PortClear(BOARD_LED2_GPIO, BOARD_LED2_GPIO_PORT, 1U << BOARD_LED2_GPIO_PIN) /*!< Turn on target LED2 */
+#define LED2_OFF() \
+ GPIO_PortSet(BOARD_LED2_GPIO, BOARD_LED2_GPIO_PORT, 1U << BOARD_LED2_GPIO_PIN) /*!< Turn off target LED2 */
+#define LED2_TOGGLE() \
+ GPIO_PortToggle(BOARD_LED2_GPIO, BOARD_LED2_GPIO_PORT, 1U << BOARD_LED2_GPIO_PIN) /*!< Toggle on target LED2 */
+
+#define LED3_INIT(output) \
+ GPIO_PinInit(BOARD_LED3_GPIO, BOARD_LED3_GPIO_PORT, BOARD_LED3_GPIO_PIN, \
+ &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED3 */
+#define LED3_ON() \
+ GPIO_PortClear(BOARD_LED3_GPIO, BOARD_LED3_GPIO_PORT, 1U << BOARD_LED3_GPIO_PIN) /*!< Turn on target LED3 */
+#define LED3_OFF() \
+ GPIO_PortSet(BOARD_LED3_GPIO, BOARD_LED3_GPIO_PORT, 1U << BOARD_LED3_GPIO_PIN) /*!< Turn off target LED3 */
+#define LED3_TOGGLE() \
+ GPIO_PortToggle(BOARD_LED3_GPIO, BOARD_LED3_GPIO_PORT, 1U << BOARD_LED3_GPIO_PIN) /*!< Toggle on target LED3 */
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus */
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+status_t BOARD_InitDebugConsole(void);
+void BOARD_InitSDRAM(void);
+#if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
+void BOARD_I2C_Init(I2C_Type *base, uint32_t clkSrc_Hz);
+status_t BOARD_I2C_Send(I2C_Type *base,
+ uint8_t deviceAddress,
+ uint32_t subAddress,
+ uint8_t subaddressSize,
+ uint8_t *txBuff,
+ uint8_t txBuffSize);
+status_t BOARD_I2C_Receive(I2C_Type *base,
+ uint8_t deviceAddress,
+ uint32_t subAddress,
+ uint8_t subaddressSize,
+ uint8_t *rxBuff,
+ uint8_t rxBuffSize);
+void BOARD_Accel_I2C_Init(void);
+status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
+status_t BOARD_Accel_I2C_Receive(
+ uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+void BOARD_Codec_I2C_Init(void);
+status_t BOARD_Codec_I2C_Send(
+ uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, const uint8_t *txBuff, uint8_t txBuffSize);
+status_t BOARD_Codec_I2C_Receive(
+ uint8_t deviceAddress, uint32_t subAddress, uint8_t subAddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
+#endif /* SDK_I2C_BASED_COMPONENT_USED */
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus */
+
+#endif /* _BOARD_H_ */
|