diff options
Diffstat (limited to 'FreeRTOS/Demo/CORTEX_MPU_STM32L4_Discovery_GCC_IAR_Keil/ST_Code/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h')
| -rw-r--r-- | FreeRTOS/Demo/CORTEX_MPU_STM32L4_Discovery_GCC_IAR_Keil/ST_Code/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h | 3125 |
1 files changed, 3125 insertions, 0 deletions
diff --git a/FreeRTOS/Demo/CORTEX_MPU_STM32L4_Discovery_GCC_IAR_Keil/ST_Code/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h b/FreeRTOS/Demo/CORTEX_MPU_STM32L4_Discovery_GCC_IAR_Keil/ST_Code/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h new file mode 100644 index 000000000..8f5a2fbb0 --- /dev/null +++ b/FreeRTOS/Demo/CORTEX_MPU_STM32L4_Discovery_GCC_IAR_Keil/ST_Code/Drivers/STM32L4xx_HAL_Driver/Inc/stm32l4xx_hal_rcc_ex.h @@ -0,0 +1,3125 @@ +/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of RCC HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_RCC_EX_H
+#define __STM32L4xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+#if defined(RCC_PLLSAI1_SUPPORT)
+/**
+ * @brief PLLSAI1 Clock structure definition
+ */
+typedef struct
+{
+
+ uint32_t PLLSAI1Source; /*!< PLLSAI1Source: PLLSAI1 entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+ uint32_t PLLSAI1M; /*!< PLLSAI1M: specifies the division factor for PLLSAI1 input clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+#else
+ uint32_t PLLSAI1M; /*!< PLLSAI1M: specifies the division factor for PLLSAI1 input clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8 */
+#endif
+
+ uint32_t PLLSAI1N; /*!< PLLSAI1N: specifies the multiplication factor for PLLSAI1 VCO output clock.
+ This parameter must be a number between 8 and 86 or 127 depending on devices. */
+
+ uint32_t PLLSAI1P; /*!< PLLSAI1P: specifies the division factor for SAI clock.
+ This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
+
+ uint32_t PLLSAI1Q; /*!< PLLSAI1Q: specifies the division factor for USB/RNG/SDMMC1 clock.
+ This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */
+
+ uint32_t PLLSAI1R; /*!< PLLSAI1R: specifies the division factor for ADC clock.
+ This parameter must be a value of @ref RCC_PLLR_Clock_Divider */
+
+ uint32_t PLLSAI1ClockOut; /*!< PLLSAIClockOut: specifies PLLSAI1 output clock to be enabled.
+ This parameter must be a value of @ref RCC_PLLSAI1_Clock_Output */
+}RCC_PLLSAI1InitTypeDef;
+#endif /* RCC_PLLSAI1_SUPPORT */
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+/**
+ * @brief PLLSAI2 Clock structure definition
+ */
+typedef struct
+{
+
+ uint32_t PLLSAI2Source; /*!< PLLSAI2Source: PLLSAI2 entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT)
+ uint32_t PLLSAI2M; /*!< PLLSAI2M: specifies the division factor for PLLSAI2 input clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+#else
+ uint32_t PLLSAI2M; /*!< PLLSAI2M: specifies the division factor for PLLSAI2 input clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8 */
+#endif
+
+ uint32_t PLLSAI2N; /*!< PLLSAI2N: specifies the multiplication factor for PLLSAI2 VCO output clock.
+ This parameter must be a number between 8 and 86 or 127 depending on devices. */
+
+ uint32_t PLLSAI2P; /*!< PLLSAI2P: specifies the division factor for SAI clock.
+ This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
+
+#if defined(RCC_PLLSAI2Q_DIV_SUPPORT)
+ uint32_t PLLSAI2Q; /*!< PLLSAI2Q: specifies the division factor for DSI clock.
+ This parameter must be a value of @ref RCC_PLLQ_Clock_Divider */
+#endif
+
+ uint32_t PLLSAI2R; /*!< PLLSAI2R: specifies the division factor for ADC clock.
+ This parameter must be a value of @ref RCC_PLLR_Clock_Divider */
+
+ uint32_t PLLSAI2ClockOut; /*!< PLLSAIClockOut: specifies PLLSAI2 output clock to be enabled.
+ This parameter must be a value of @ref RCC_PLLSAI2_Clock_Output */
+}RCC_PLLSAI2InitTypeDef;
+
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+#if defined(RCC_PLLSAI1_SUPPORT)
+
+ RCC_PLLSAI1InitTypeDef PLLSAI1; /*!< PLLSAI1 structure parameters.
+ This parameter will be used only when PLLSAI1 is selected as Clock Source for SAI1, USB/RNG/SDMMC1 or ADC */
+#endif /* RCC_PLLSAI1_SUPPORT */
+#if defined(RCC_PLLSAI2_SUPPORT)
+
+ RCC_PLLSAI2InitTypeDef PLLSAI2; /*!< PLLSAI2 structure parameters.
+ This parameter will be used only when PLLSAI2 is selected as Clock Source for SAI2 or ADC */
+
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+ uint32_t Usart1ClockSelection; /*!< Specifies USART1 clock source.
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< Specifies USART2 clock source.
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+#if defined(USART3)
+
+ uint32_t Usart3ClockSelection; /*!< Specifies USART3 clock source.
+ This parameter can be a value of @ref RCCEx_USART3_Clock_Source */
+
+#endif /* USART3 */
+
+#if defined(UART4)
+
+ uint32_t Uart4ClockSelection; /*!< Specifies UART4 clock source.
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+#endif /* UART4 */
+
+#if defined(UART5)
+
+ uint32_t Uart5ClockSelection; /*!< Specifies UART5 clock source.
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+#endif /* UART5 */
+
+ uint32_t Lpuart1ClockSelection; /*!< Specifies LPUART1 clock source.
+ This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< Specifies I2C1 clock source.
+ This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */
+
+#if defined(I2C2)
+
+ uint32_t I2c2ClockSelection; /*!< Specifies I2C2 clock source.
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+#endif /* I2C2 */
+
+ uint32_t I2c3ClockSelection; /*!< Specifies I2C3 clock source.
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+#if defined(I2C4)
+
+ uint32_t I2c4ClockSelection; /*!< Specifies I2C4 clock source.
+ This parameter can be a value of @ref RCCEx_I2C4_Clock_Source */
+
+#endif /* I2C4 */
+
+ uint32_t Lptim1ClockSelection; /*!< Specifies LPTIM1 clock source.
+ This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */
+
+ uint32_t Lptim2ClockSelection; /*!< Specifies LPTIM2 clock source.
+ This parameter can be a value of @ref RCCEx_LPTIM2_Clock_Source */
+#if defined(SAI1)
+
+ uint32_t Sai1ClockSelection; /*!< Specifies SAI1 clock source.
+ This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
+#endif /* SAI1 */
+
+#if defined(SAI2)
+
+ uint32_t Sai2ClockSelection; /*!< Specifies SAI2 clock source.
+ This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
+
+#endif /* SAI2 */
+
+#if defined(USB_OTG_FS) || defined(USB)
+
+ uint32_t UsbClockSelection; /*!< Specifies USB clock source (warning: same source for SDMMC1 and RNG).
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+#endif /* USB_OTG_FS || USB */
+
+#if defined(SDMMC1)
+
+ uint32_t Sdmmc1ClockSelection; /*!< Specifies SDMMC1 clock source (warning: same source for USB and RNG).
+ This parameter can be a value of @ref RCCEx_SDMMC1_Clock_Source */
+
+#endif /* SDMMC1 */
+
+ uint32_t RngClockSelection; /*!< Specifies RNG clock source (warning: same source for USB and SDMMC1).
+ This parameter can be a value of @ref RCCEx_RNG_Clock_Source */
+
+#if !defined(STM32L412xx) && !defined(STM32L422xx)
+ uint32_t AdcClockSelection; /*!< Specifies ADC interface clock source.
+ This parameter can be a value of @ref RCCEx_ADC_Clock_Source */
+#endif /* !STM32L412xx && !STM32L422xx */
+
+#if defined(SWPMI1)
+
+ uint32_t Swpmi1ClockSelection; /*!< Specifies SWPMI1 clock source.
+ This parameter can be a value of @ref RCCEx_SWPMI1_Clock_Source */
+
+#endif /* SWPMI1 */
+
+#if defined(DFSDM1_Filter0)
+
+ uint32_t Dfsdm1ClockSelection; /*!< Specifies DFSDM1 clock source.
+ This parameter can be a value of @ref RCCEx_DFSDM1_Clock_Source */
+
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+ uint32_t Dfsdm1AudioClockSelection; /*!< Specifies DFSDM1 audio clock source.
+ This parameter can be a value of @ref RCCEx_DFSDM1_Audio_Clock_Source */
+
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+#endif /* DFSDM1_Filter0 */
+
+#if defined(LTDC)
+
+ uint32_t LtdcClockSelection; /*!< Specifies LTDC clock source.
+ This parameter can be a value of @ref RCCEx_LTDC_Clock_Source */
+
+#endif /* LTDC */
+
+#if defined(DSI)
+
+ uint32_t DsiClockSelection; /*!< Specifies DSI clock source.
+ This parameter can be a value of @ref RCCEx_DSI_Clock_Source */
+
+#endif /* DSI */
+
+#if defined(OCTOSPI1) || defined(OCTOSPI2)
+
+ uint32_t OspiClockSelection; /*!< Specifies OctoSPI clock source.
+ This parameter can be a value of @ref RCCEx_OSPI_Clock_Source */
+
+#endif
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC clock source.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+}RCC_PeriphCLKInitTypeDef;
+
+#if defined(CRS)
+
+/**
+ * @brief RCC_CRS Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */
+
+ uint32_t Source; /*!< Specifies the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroSource */
+
+ uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */
+
+ uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event.
+ It can be calculated in using macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__)
+ This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/
+
+ uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value.
+ This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator.
+ This parameter must be a number between 0 and 0x7F for STM32L412xx/L422xx, between 0 and 0x3F otherwise,
+ or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */
+
+}RCC_CRSInitTypeDef;
+
+/**
+ * @brief RCC_CRS Synchronization structure definition
+ */
+typedef struct
+{
+ uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value.
+ This parameter must be a number between 0 and 0xFFFF */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming.
+ This parameter must be a number between 0 and 0x7F for STM32L412xx/L422xx, between 0 and 0x3F otherwise */
+
+ uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter
+ value latched in the time of the last SYNC event.
+ This parameter must be a number between 0 and 0xFFFF */
+
+ uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the
+ frequency error counter latched in the time of the last SYNC event.
+ It shows whether the actual frequency is below or above the target.
+ This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/
+
+}RCC_CRSSynchroInfoTypeDef;
+
+#endif /* CRS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_LSCO_Clock_Source Low Speed Clock Source
+ * @{
+ */
+#define RCC_LSCOSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock output */
+#define RCC_LSCOSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock output */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection
+ * @{
+ */
+#define RCC_PERIPHCLK_USART1 0x00000001U
+#define RCC_PERIPHCLK_USART2 0x00000002U
+#if defined(USART3)
+#define RCC_PERIPHCLK_USART3 0x00000004U
+#endif
+#if defined(UART4)
+#define RCC_PERIPHCLK_UART4 0x00000008U
+#endif
+#if defined(UART5)
+#define RCC_PERIPHCLK_UART5 0x00000010U
+#endif
+#define RCC_PERIPHCLK_LPUART1 0x00000020U
+#define RCC_PERIPHCLK_I2C1 0x00000040U
+#if defined(I2C2)
+#define RCC_PERIPHCLK_I2C2 0x00000080U
+#endif
+#define RCC_PERIPHCLK_I2C3 0x00000100U
+#define RCC_PERIPHCLK_LPTIM1 0x00000200U
+#define RCC_PERIPHCLK_LPTIM2 0x00000400U
+#if defined(SAI1)
+#define RCC_PERIPHCLK_SAI1 0x00000800U
+#endif
+#if defined(SAI2)
+#define RCC_PERIPHCLK_SAI2 0x00001000U
+#endif
+#if defined(USB_OTG_FS) || defined(USB)
+#define RCC_PERIPHCLK_USB 0x00002000U
+#endif
+#define RCC_PERIPHCLK_ADC 0x00004000U
+#if defined(SWPMI1)
+#define RCC_PERIPHCLK_SWPMI1 0x00008000U
+#endif
+#if defined(DFSDM1_Filter0)
+#define RCC_PERIPHCLK_DFSDM1 0x00010000U
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define RCC_PERIPHCLK_DFSDM1AUDIO 0x00200000U
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+#endif
+#define RCC_PERIPHCLK_RTC 0x00020000U
+#define RCC_PERIPHCLK_RNG 0x00040000U
+#if defined(SDMMC1)
+#define RCC_PERIPHCLK_SDMMC1 0x00080000U
+#endif
+#if defined(I2C4)
+#define RCC_PERIPHCLK_I2C4 0x00100000U
+#endif
+#if defined(LTDC)
+#define RCC_PERIPHCLK_LTDC 0x00400000U
+#endif
+#if defined(DSI)
+#define RCC_PERIPHCLK_DSI 0x00800000U
+#endif
+#if defined(OCTOSPI1) || defined(OCTOSPI2)
+#define RCC_PERIPHCLK_OSPI 0x01000000U
+#endif
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_USART1_Clock_Source USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 0x00000000U
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CCIPR_USART1SEL_0
+#define RCC_USART1CLKSOURCE_HSI RCC_CCIPR_USART1SEL_1
+#define RCC_USART1CLKSOURCE_LSE (RCC_CCIPR_USART1SEL_0 | RCC_CCIPR_USART1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_USART2_Clock_Source USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 0x00000000U
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CCIPR_USART2SEL_0
+#define RCC_USART2CLKSOURCE_HSI RCC_CCIPR_USART2SEL_1
+#define RCC_USART2CLKSOURCE_LSE (RCC_CCIPR_USART2SEL_0 | RCC_CCIPR_USART2SEL_1)
+/**
+ * @}
+ */
+
+#if defined(USART3)
+/** @defgroup RCCEx_USART3_Clock_Source USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 0x00000000U
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_CCIPR_USART3SEL_0
+#define RCC_USART3CLKSOURCE_HSI RCC_CCIPR_USART3SEL_1
+#define RCC_USART3CLKSOURCE_LSE (RCC_CCIPR_USART3SEL_0 | RCC_CCIPR_USART3SEL_1)
+/**
+ * @}
+ */
+#endif /* USART3 */
+
+#if defined(UART4)
+/** @defgroup RCCEx_UART4_Clock_Source UART4 Clock Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 0x00000000U
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_CCIPR_UART4SEL_0
+#define RCC_UART4CLKSOURCE_HSI RCC_CCIPR_UART4SEL_1
+#define RCC_UART4CLKSOURCE_LSE (RCC_CCIPR_UART4SEL_0 | RCC_CCIPR_UART4SEL_1)
+/**
+ * @}
+ */
+#endif /* UART4 */
+
+#if defined(UART5)
+/** @defgroup RCCEx_UART5_Clock_Source UART5 Clock Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 0x00000000U
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_CCIPR_UART5SEL_0
+#define RCC_UART5CLKSOURCE_HSI RCC_CCIPR_UART5SEL_1
+#define RCC_UART5CLKSOURCE_LSE (RCC_CCIPR_UART5SEL_0 | RCC_CCIPR_UART5SEL_1)
+/**
+ * @}
+ */
+#endif /* UART5 */
+
+/** @defgroup RCCEx_LPUART1_Clock_Source LPUART1 Clock Source
+ * @{
+ */
+#define RCC_LPUART1CLKSOURCE_PCLK1 0x00000000U
+#define RCC_LPUART1CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0
+#define RCC_LPUART1CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1
+#define RCC_LPUART1CLKSOURCE_LSE (RCC_CCIPR_LPUART1SEL_0 | RCC_CCIPR_LPUART1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C1_Clock_Source I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_PCLK1 0x00000000U
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CCIPR_I2C1SEL_0
+#define RCC_I2C1CLKSOURCE_HSI RCC_CCIPR_I2C1SEL_1
+/**
+ * @}
+ */
+
+#if defined(I2C2)
+/** @defgroup RCCEx_I2C2_Clock_Source I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_PCLK1 0x00000000U
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CCIPR_I2C2SEL_0
+#define RCC_I2C2CLKSOURCE_HSI RCC_CCIPR_I2C2SEL_1
+/**
+ * @}
+ */
+#endif /* I2C2 */
+
+/** @defgroup RCCEx_I2C3_Clock_Source I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_PCLK1 0x00000000U
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CCIPR_I2C3SEL_0
+#define RCC_I2C3CLKSOURCE_HSI RCC_CCIPR_I2C3SEL_1
+/**
+ * @}
+ */
+
+#if defined(I2C4)
+/** @defgroup RCCEx_I2C4_Clock_Source I2C4 Clock Source
+ * @{
+ */
+#define RCC_I2C4CLKSOURCE_PCLK1 0x00000000U
+#define RCC_I2C4CLKSOURCE_SYSCLK RCC_CCIPR2_I2C4SEL_0
+#define RCC_I2C4CLKSOURCE_HSI RCC_CCIPR2_I2C4SEL_1
+/**
+ * @}
+ */
+#endif /* I2C4 */
+
+#if defined(SAI1)
+/** @defgroup RCCEx_SAI1_Clock_Source SAI1 Clock Source
+ * @{
+ */
+#define RCC_SAI1CLKSOURCE_PLLSAI1 0x00000000U
+#if defined(RCC_PLLSAI2_SUPPORT)
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define RCC_SAI1CLKSOURCE_PLLSAI2 RCC_CCIPR2_SAI1SEL_0
+#else
+#define RCC_SAI1CLKSOURCE_PLLSAI2 RCC_CCIPR_SAI1SEL_0
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+#endif /* RCC_PLLSAI2_SUPPORT */
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define RCC_SAI1CLKSOURCE_PLL RCC_CCIPR2_SAI1SEL_1
+#define RCC_SAI1CLKSOURCE_PIN (RCC_CCIPR2_SAI1SEL_1 | RCC_CCIPR2_SAI1SEL_0)
+#define RCC_SAI1CLKSOURCE_HSI RCC_CCIPR2_SAI1SEL_2
+#else
+#define RCC_SAI1CLKSOURCE_PLL RCC_CCIPR_SAI1SEL_1
+#define RCC_SAI1CLKSOURCE_PIN RCC_CCIPR_SAI1SEL
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+/**
+ * @}
+ */
+#endif /* SAI1 */
+
+#if defined(SAI2)
+/** @defgroup RCCEx_SAI2_Clock_Source SAI2 Clock Source
+ * @{
+ */
+#define RCC_SAI2CLKSOURCE_PLLSAI1 0x00000000U
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define RCC_SAI2CLKSOURCE_PLLSAI2 RCC_CCIPR2_SAI2SEL_0
+#define RCC_SAI2CLKSOURCE_PLL RCC_CCIPR2_SAI2SEL_1
+#define RCC_SAI2CLKSOURCE_PIN (RCC_CCIPR2_SAI2SEL_1 | RCC_CCIPR2_SAI2SEL_0)
+#define RCC_SAI2CLKSOURCE_HSI RCC_CCIPR2_SAI2SEL_2
+#else
+#define RCC_SAI2CLKSOURCE_PLLSAI2 RCC_CCIPR_SAI2SEL_0
+#define RCC_SAI2CLKSOURCE_PLL RCC_CCIPR_SAI2SEL_1
+#define RCC_SAI2CLKSOURCE_PIN RCC_CCIPR_SAI2SEL
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+/**
+ * @}
+ */
+#endif /* SAI2 */
+
+/** @defgroup RCCEx_LPTIM1_Clock_Source LPTIM1 Clock Source
+ * @{
+ */
+#define RCC_LPTIM1CLKSOURCE_PCLK1 0x00000000U
+#define RCC_LPTIM1CLKSOURCE_LSI RCC_CCIPR_LPTIM1SEL_0
+#define RCC_LPTIM1CLKSOURCE_HSI RCC_CCIPR_LPTIM1SEL_1
+#define RCC_LPTIM1CLKSOURCE_LSE RCC_CCIPR_LPTIM1SEL
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LPTIM2_Clock_Source LPTIM2 Clock Source
+ * @{
+ */
+#define RCC_LPTIM2CLKSOURCE_PCLK1 0x00000000U
+#define RCC_LPTIM2CLKSOURCE_LSI RCC_CCIPR_LPTIM2SEL_0
+#define RCC_LPTIM2CLKSOURCE_HSI RCC_CCIPR_LPTIM2SEL_1
+#define RCC_LPTIM2CLKSOURCE_LSE RCC_CCIPR_LPTIM2SEL
+/**
+ * @}
+ */
+
+#if defined(SDMMC1)
+/** @defgroup RCCEx_SDMMC1_Clock_Source SDMMC1 Clock Source
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+#define RCC_SDMMC1CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock selected as SDMMC1 clock */
+#else
+#define RCC_SDMMC1CLKSOURCE_NONE 0x00000000U /*!< No clock selected as SDMMC1 clock */
+#endif /* RCC_HSI48_SUPPORT */
+#define RCC_SDMMC1CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 "Q" clock selected as SDMMC1 clock */
+#define RCC_SDMMC1CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL "Q" clock selected as SDMMC1 clock */
+#define RCC_SDMMC1CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock selected as SDMMC1 clock */
+#if defined(RCC_CCIPR2_SDMMCSEL)
+#define RCC_SDMMC1CLKSOURCE_PLLP RCC_CCIPR2_SDMMCSEL /*!< PLL "P" clock selected as SDMMC1 kernel clock */
+#endif /* RCC_CCIPR2_SDMMCSEL */
+/**
+ * @}
+ */
+#endif /* SDMMC1 */
+
+/** @defgroup RCCEx_RNG_Clock_Source RNG Clock Source
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+#define RCC_RNGCLKSOURCE_HSI48 0x00000000U
+#else
+#define RCC_RNGCLKSOURCE_NONE 0x00000000U
+#endif /* RCC_HSI48_SUPPORT */
+#if defined(RCC_PLLSAI1_SUPPORT)
+#define RCC_RNGCLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0
+#endif /* RCC_PLLSAI1_SUPPORT */
+#define RCC_RNGCLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1
+#define RCC_RNGCLKSOURCE_MSI RCC_CCIPR_CLK48SEL
+/**
+ * @}
+ */
+
+#if defined(USB_OTG_FS) || defined(USB)
+/** @defgroup RCCEx_USB_Clock_Source USB Clock Source
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+#define RCC_USBCLKSOURCE_HSI48 0x00000000U
+#else
+#define RCC_USBCLKSOURCE_NONE 0x00000000U
+#endif /* RCC_HSI48_SUPPORT */
+#if defined(RCC_PLLSAI1_SUPPORT)
+#define RCC_USBCLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0
+#endif /* RCC_PLLSAI1_SUPPORT */
+#define RCC_USBCLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1
+#define RCC_USBCLKSOURCE_MSI RCC_CCIPR_CLK48SEL
+/**
+ * @}
+ */
+#endif /* USB_OTG_FS || USB */
+
+/** @defgroup RCCEx_ADC_Clock_Source ADC Clock Source
+ * @{
+ */
+#define RCC_ADCCLKSOURCE_NONE 0x00000000U
+#if defined(RCC_PLLSAI1_SUPPORT)
+#define RCC_ADCCLKSOURCE_PLLSAI1 RCC_CCIPR_ADCSEL_0
+#endif /* RCC_PLLSAI1_SUPPORT */
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx)
+#define RCC_ADCCLKSOURCE_PLLSAI2 RCC_CCIPR_ADCSEL_1
+#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */
+#if defined(RCC_CCIPR_ADCSEL)
+#define RCC_ADCCLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL
+#else
+#define RCC_ADCCLKSOURCE_SYSCLK 0x30000000U
+#endif /* RCC_CCIPR_ADCSEL */
+/**
+ * @}
+ */
+
+#if defined(SWPMI1)
+/** @defgroup RCCEx_SWPMI1_Clock_Source SWPMI1 Clock Source
+ * @{
+ */
+#define RCC_SWPMI1CLKSOURCE_PCLK1 0x00000000U
+#define RCC_SWPMI1CLKSOURCE_HSI RCC_CCIPR_SWPMI1SEL
+/**
+ * @}
+ */
+#endif /* SWPMI1 */
+
+#if defined(DFSDM1_Filter0)
+/** @defgroup RCCEx_DFSDM1_Clock_Source DFSDM1 Clock Source
+ * @{
+ */
+#define RCC_DFSDM1CLKSOURCE_PCLK2 0x00000000U
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_CCIPR2_DFSDM1SEL
+#else
+#define RCC_DFSDM1CLKSOURCE_SYSCLK RCC_CCIPR_DFSDM1SEL
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+/**
+ * @}
+ */
+
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+/** @defgroup RCCEx_DFSDM1_Audio_Clock_Source DFSDM1 Audio Clock Source
+ * @{
+ */
+#define RCC_DFSDM1AUDIOCLKSOURCE_SAI1 0x00000000U
+#define RCC_DFSDM1AUDIOCLKSOURCE_HSI RCC_CCIPR2_ADFSDM1SEL_0
+#define RCC_DFSDM1AUDIOCLKSOURCE_MSI RCC_CCIPR2_ADFSDM1SEL_1
+/**
+ * @}
+ */
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+#endif /* DFSDM1_Filter0 */
+
+#if defined(LTDC)
+/** @defgroup RCCEx_LTDC_Clock_Source LTDC Clock Source
+ * @{
+ */
+#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 0x00000000U
+#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 RCC_CCIPR2_PLLSAI2DIVR_0
+#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 RCC_CCIPR2_PLLSAI2DIVR_1
+#define RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 RCC_CCIPR2_PLLSAI2DIVR
+/**
+ * @}
+ */
+#endif /* LTDC */
+
+#if defined(DSI)
+/** @defgroup RCCEx_DSI_Clock_Source DSI Clock Source
+ * @{
+ */
+#define RCC_DSICLKSOURCE_DSIPHY 0x00000000U
+#define RCC_DSICLKSOURCE_PLLSAI2 RCC_CCIPR2_DSISEL
+/**
+ * @}
+ */
+#endif /* DSI */
+
+#if defined(OCTOSPI1) || defined(OCTOSPI2)
+/** @defgroup RCCEx_OSPI_Clock_Source OctoSPI Clock Source
+ * @{
+ */
+#define RCC_OSPICLKSOURCE_SYSCLK 0x00000000U
+#define RCC_OSPICLKSOURCE_MSI RCC_CCIPR2_OSPISEL_0
+#define RCC_OSPICLKSOURCE_PLL RCC_CCIPR2_OSPISEL_1
+/**
+ * @}
+ */
+#endif /* OCTOSPI1 || OCTOSPI2 */
+
+/** @defgroup RCCEx_EXTI_LINE_LSECSS RCC LSE CSS external interrupt line
+ * @{
+ */
+#define RCC_EXTI_LINE_LSECSS EXTI_IMR1_IM19 /*!< External interrupt line 19 connected to the LSE CSS EXTI Line */
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+ * @{
+ */
+#define RCC_CRS_NONE 0x00000000U
+#define RCC_CRS_TIMEOUT 0x00000001U
+#define RCC_CRS_SYNCOK 0x00000002U
+#define RCC_CRS_SYNCWARN 0x00000004U
+#define RCC_CRS_SYNCERR 0x00000008U
+#define RCC_CRS_SYNCMISS 0x00000010U
+#define RCC_CRS_TRIMOVF 0x00000020U
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS SynchroSource
+ * @{
+ */
+#define RCC_CRS_SYNC_SOURCE_GPIO 0x00000000U /*!< Synchro Signal source GPIO */
+#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
+#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS SynchroDivider
+ * @{
+ */
+#define RCC_CRS_SYNC_DIV1 0x00000000U /*!< Synchro Signal not divided (default) */
+#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
+#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
+#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
+#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
+#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
+#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
+#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS SynchroPolarity
+ * @{
+ */
+#define RCC_CRS_SYNC_POLARITY_RISING 0x00000000U /*!< Synchro Active on rising edge (default) */
+#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS ReloadValueDefault
+ * @{
+ */
+#define RCC_CRS_RELOADVALUE_DEFAULT 0x0000BB7FU /*!< The reset value of the RELOAD field corresponds
+ to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS ErrorLimitDefault
+ * @{
+ */
+#define RCC_CRS_ERRORLIMIT_DEFAULT 0x00000022U /*!< Default Frequency error limit */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS HSI48CalibrationDefault
+ * @{
+ */
+#if defined(STM32L412xx) || defined(STM32L422xx)
+#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000040U /*!< The default value is 64, which corresponds to the middle of the trimming interval.
+ The trimming step is specified in the product datasheet. A higher TRIM value
+ corresponds to a higher output frequency */
+#else
+#define RCC_CRS_HSI48CALIBRATION_DEFAULT 0x00000020U /*!< The default value is 32, which corresponds to the middle of the trimming interval.
+ The trimming step is specified in the product datasheet. A higher TRIM value
+ corresponds to a higher output frequency */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS FreqErrorDirection
+ * @{
+ */
+#define RCC_CRS_FREQERRORDIR_UP 0x00000000U /*!< Upcounting direction, the actual frequency is above the target */
+#define RCC_CRS_FREQERRORDIR_DOWN CRS_ISR_FEDIR /*!< Downcounting direction, the actual frequency is below the target */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources
+ * @{
+ */
+#define RCC_CRS_IT_SYNCOK CRS_CR_SYNCOKIE /*!< SYNC event OK */
+#define RCC_CRS_IT_SYNCWARN CRS_CR_SYNCWARNIE /*!< SYNC warning */
+#define RCC_CRS_IT_ERR CRS_CR_ERRIE /*!< Error */
+#define RCC_CRS_IT_ESYNC CRS_CR_ESYNCIE /*!< Expected SYNC */
+#define RCC_CRS_IT_SYNCERR CRS_CR_ERRIE /*!< SYNC error */
+#define RCC_CRS_IT_SYNCMISS CRS_CR_ERRIE /*!< SYNC missed */
+#define RCC_CRS_IT_TRIMOVF CRS_CR_ERRIE /*!< Trimming overflow or underflow */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags
+ * @{
+ */
+#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK flag */
+#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning flag */
+#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /*!< Error flag */
+#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC flag */
+#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */
+#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/
+#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+
+#if defined(RCC_PLLSAI1_SUPPORT)
+
+/**
+ * @brief Macro to configure the PLLSAI1 clock multiplication and division factors.
+ *
+ * @note This function must be used only when the PLLSAI1 is disabled.
+ * @note PLLSAI1 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ @if STM32L4S9xx
+ * @param __PLLSAI1M__ specifies the division factor of PLLSAI1 input clock.
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 16.
+ *
+ @endif
+ * @param __PLLSAI1N__ specifies the multiplication factor for PLLSAI1 VCO output clock.
+ * This parameter must be a number between 8 and 86.
+ * @note You have to set the PLLSAI1N parameter correctly to ensure that the VCO
+ * output frequency is between 64 and 344 MHz.
+ * PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI1N
+ *
+ * @param __PLLSAI1P__ specifies the division factor for SAI clock.
+ * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx
+ * else (2 to 31).
+ * SAI1 clock frequency = f(PLLSAI1) / PLLSAI1P
+ *
+ * @param __PLLSAI1Q__ specifies the division factor for USB/RNG/SDMMC1 clock.
+ * This parameter must be in the range (2, 4, 6 or 8).
+ * USB/RNG/SDMMC1 clock frequency = f(PLLSAI1) / PLLSAI1Q
+ *
+ * @param __PLLSAI1R__ specifies the division factor for SAR ADC clock.
+ * This parameter must be in the range (2, 4, 6 or 8).
+ * ADC clock frequency = f(PLLSAI1) / PLLSAI1R
+ *
+ * @retval None
+ */
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+
+#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+
+#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, \
+ (RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \
+ RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1PDIV), \
+ ((((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) | \
+ ((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \
+ ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \
+ ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \
+ ((uint32_t)(__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos)))
+
+#else
+
+#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, \
+ (RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \
+ RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R), \
+ ((((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos) | \
+ ((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \
+ ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \
+ ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \
+ (((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos)))
+
+#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
+
+#else
+
+#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+
+#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, \
+ (RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \
+ RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1PDIV), \
+ (((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \
+ ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \
+ ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \
+ ((uint32_t)(__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos)))
+
+#else
+
+#define __HAL_RCC_PLLSAI1_CONFIG(__PLLSAI1N__, __PLLSAI1P__, __PLLSAI1Q__, __PLLSAI1R__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, \
+ (RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | \
+ RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1R), \
+ (((__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | \
+ ((((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | \
+ ((((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | \
+ (((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos)))
+
+#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
+
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
+
+/**
+ * @brief Macro to configure the PLLSAI1 clock multiplication factor N.
+ *
+ * @note This function must be used only when the PLLSAI1 is disabled.
+ * @note PLLSAI1 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI1N__ specifies the multiplication factor for PLLSAI1 VCO output clock.
+ * This parameter must be a number between 8 and 86.
+ * @note You have to set the PLLSAI1N parameter correctly to ensure that the VCO
+ * output frequency is between 64 and 344 MHz.
+ * Use to set PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI1N
+ *
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI1_MULN_CONFIG(__PLLSAI1N__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N, (__PLLSAI1N__) << RCC_PLLSAI1CFGR_PLLSAI1N_Pos)
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+
+/** @brief Macro to configure the PLLSAI1 input clock division factor M.
+ *
+ * @note This function must be used only when the PLLSAI1 is disabled.
+ * @note PLLSAI1 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI1M__ specifies the division factor for PLLSAI1 clock.
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 16.
+ *
+ * @retval None
+ */
+
+#define __HAL_RCC_PLLSAI1_DIVM_CONFIG(__PLLSAI1M__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M, ((__PLLSAI1M__) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)
+
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
+
+/** @brief Macro to configure the PLLSAI1 clock division factor P.
+ *
+ * @note This function must be used only when the PLLSAI1 is disabled.
+ * @note PLLSAI1 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI1P__ specifies the division factor for SAI clock.
+ * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx
+ * else (2 to 31).
+ * Use to set SAI1 clock frequency = f(PLLSAI1) / PLLSAI1P
+ *
+ * @retval None
+ */
+#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+
+#define __HAL_RCC_PLLSAI1_DIVP_CONFIG(__PLLSAI1P__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV, (__PLLSAI1P__) << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos)
+
+#else
+
+#define __HAL_RCC_PLLSAI1_DIVP_CONFIG(__PLLSAI1P__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P, ((__PLLSAI1P__) >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos)
+
+#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
+
+/** @brief Macro to configure the PLLSAI1 clock division factor Q.
+ *
+ * @note This function must be used only when the PLLSAI1 is disabled.
+ * @note PLLSAI1 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI1Q__ specifies the division factor for USB/RNG/SDMMC1 clock.
+ * This parameter must be in the range (2, 4, 6 or 8).
+ * Use to set USB/RNG/SDMMC1 clock frequency = f(PLLSAI1) / PLLSAI1Q
+ *
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI1_DIVQ_CONFIG(__PLLSAI1Q__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q, (((__PLLSAI1Q__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos)
+
+/** @brief Macro to configure the PLLSAI1 clock division factor R.
+ *
+ * @note This function must be used only when the PLLSAI1 is disabled.
+ * @note PLLSAI1 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI1R__ specifies the division factor for ADC clock.
+ * This parameter must be in the range (2, 4, 6 or 8)
+ * Use to set ADC clock frequency = f(PLLSAI1) / PLLSAI1R
+ *
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI1_DIVR_CONFIG(__PLLSAI1R__) \
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R, (((__PLLSAI1R__) >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos)
+
+/**
+ * @brief Macros to enable or disable the PLLSAI1.
+ * @note The PLLSAI1 is disabled by hardware when entering STOP and STANDBY modes.
+ * @retval None
+ */
+
+#define __HAL_RCC_PLLSAI1_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLSAI1ON)
+
+#define __HAL_RCC_PLLSAI1_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI1ON)
+
+/**
+ * @brief Macros to enable or disable each clock output (PLLSAI1_SAI1, PLLSAI1_USB2 and PLLSAI1_ADC1).
+ * @note Enabling and disabling those clocks can be done without the need to stop the PLL.
+ * This is mainly used to save Power.
+ * @param __PLLSAI1_CLOCKOUT__ specifies the PLLSAI1 clock to be output.
+ * This parameter can be one or a combination of the following values:
+ * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve
+ * high-quality audio performance on SAI interface in case.
+ * @arg @ref RCC_PLLSAI1_48M2CLK This clock is used to generate the clock for the USB OTG FS (48 MHz),
+ * the random number generator (<=48 MHz) and the SDIO (<= 48 MHz).
+ * @arg @ref RCC_PLLSAI1_ADC1CLK Clock used to clock ADC peripheral.
+ * @retval None
+ */
+
+#define __HAL_RCC_PLLSAI1CLKOUT_ENABLE(__PLLSAI1_CLOCKOUT__) SET_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__))
+
+#define __HAL_RCC_PLLSAI1CLKOUT_DISABLE(__PLLSAI1_CLOCKOUT__) CLEAR_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__))
+
+/**
+ * @brief Macro to get clock output enable status (PLLSAI1_SAI1, PLLSAI1_USB2 and PLLSAI1_ADC1).
+ * @param __PLLSAI1_CLOCKOUT__ specifies the PLLSAI1 clock to be output.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_PLLSAI1_SAI1CLK This clock is used to generate an accurate clock to achieve
+ * high-quality audio performance on SAI interface in case.
+ * @arg @ref RCC_PLLSAI1_48M2CLK This clock is used to generate the clock for the USB OTG FS (48 MHz),
+ * the random number generator (<=48 MHz) and the SDIO (<= 48 MHz).
+ * @arg @ref RCC_PLLSAI1_ADC1CLK Clock used to clock ADC peripheral.
+ * @retval SET / RESET
+ */
+#define __HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(__PLLSAI1_CLOCKOUT__) READ_BIT(RCC->PLLSAI1CFGR, (__PLLSAI1_CLOCKOUT__))
+
+#endif /* RCC_PLLSAI1_SUPPORT */
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+
+/**
+ * @brief Macro to configure the PLLSAI2 clock multiplication and division factors.
+ *
+ * @note This function must be used only when the PLLSAI2 is disabled.
+ * @note PLLSAI2 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ @if STM32L4S9xx
+ * @param __PLLSAI2M__ specifies the division factor of PLLSAI2 input clock.
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 16.
+ *
+ @endif
+ * @param __PLLSAI2N__ specifies the multiplication factor for PLLSAI2 VCO output clock.
+ * This parameter must be a number between 8 and 86.
+ * @note You have to set the PLLSAI2N parameter correctly to ensure that the VCO
+ * output frequency is between 64 and 344 MHz.
+ *
+ * @param __PLLSAI2P__ specifies the division factor for SAI clock.
+ * This parameter must be a number in the range (7 or 17) for STM32L47xxx/L48xxx
+ * else (2 to 31).
+ * SAI2 clock frequency = f(PLLSAI2) / PLLSAI2P
+ *
+ @if STM32L4S9xx
+ * @param __PLLSAI2Q__ specifies the division factor for DSI clock.
+ * This parameter must be in the range (2, 4, 6 or 8).
+ * DSI clock frequency = f(PLLSAI2) / PLLSAI2Q
+ *
+ @endif
+ * @param __PLLSAI2R__ specifies the division factor for SAR ADC clock.
+ * This parameter must be in the range (2, 4, 6 or 8).
+ *
+ * @retval None
+ */
+
+#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT)
+
+# if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT)
+
+#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2Q__, __PLLSAI2R__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, \
+ (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \
+ RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \
+ ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \
+ ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \
+ ((((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | \
+ ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \
+ ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)))
+
+# elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
+
+#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, \
+ (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \
+ RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \
+ ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \
+ ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \
+ ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \
+ ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)))
+
+# else
+
+#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, \
+ (RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \
+ RCC_PLLSAI2CFGR_PLLSAI2R), \
+ ((((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos) | \
+ ((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \
+ ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \
+ (((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos)))
+
+# endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */
+
+#else
+
+# if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT)
+
+#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2Q__, __PLLSAI2R__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, \
+ (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \
+ RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \
+ (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \
+ ((((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | \
+ ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \
+ ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)))
+
+# elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
+
+#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, \
+ (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \
+ RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2PDIV), \
+ (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \
+ ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \
+ ((uint32_t)(__PLLSAI2P__) << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)))
+
+# else
+
+#define __HAL_RCC_PLLSAI2_CONFIG(__PLLSAI2N__, __PLLSAI2P__, __PLLSAI2R__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, \
+ (RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | \
+ RCC_PLLSAI2CFGR_PLLSAI2R), \
+ (((__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | \
+ ((((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | \
+ (((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos)))
+
+# endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */
+
+#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */
+
+
+/**
+ * @brief Macro to configure the PLLSAI2 clock multiplication factor N.
+ *
+ * @note This function must be used only when the PLLSAI2 is disabled.
+ * @note PLLSAI2 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI2N__ specifies the multiplication factor for PLLSAI2 VCO output clock.
+ * This parameter must be a number between 8 and 86.
+ * @note You have to set the PLLSAI2N parameter correctly to ensure that the VCO
+ * output frequency is between 64 and 344 MHz.
+ * PLLSAI1 clock frequency = f(PLLSAI1) multiplied by PLLSAI2N
+ *
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI2_MULN_CONFIG(__PLLSAI2N__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N, (__PLLSAI2N__) << RCC_PLLSAI2CFGR_PLLSAI2N_Pos)
+
+#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT)
+
+/** @brief Macro to configure the PLLSAI2 input clock division factor M.
+ *
+ * @note This function must be used only when the PLLSAI2 is disabled.
+ * @note PLLSAI2 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI2M__ specifies the division factor for PLLSAI2 clock.
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 16.
+ *
+ * @retval None
+ */
+
+#define __HAL_RCC_PLLSAI2_DIVM_CONFIG(__PLLSAI2M__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M, ((__PLLSAI2M__) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)
+
+#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */
+
+/** @brief Macro to configure the PLLSAI2 clock division factor P.
+ *
+ * @note This function must be used only when the PLLSAI2 is disabled.
+ * @note PLLSAI2 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI2P__ specifies the division factor.
+ * This parameter must be a number in the range (7 or 17).
+ * Use to set SAI2 clock frequency = f(PLLSAI2) / __PLLSAI2P__
+ *
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI2_DIVP_CONFIG(__PLLSAI2P__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P, ((__PLLSAI2P__) >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos)
+
+#if defined(RCC_PLLSAI2Q_DIV_SUPPORT)
+
+/** @brief Macro to configure the PLLSAI2 clock division factor Q.
+ *
+ * @note This function must be used only when the PLLSAI2 is disabled.
+ * @note PLLSAI2 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI2Q__ specifies the division factor for USB/RNG/SDMMC1 clock.
+ * This parameter must be in the range (2, 4, 6 or 8).
+ * Use to set USB/RNG/SDMMC1 clock frequency = f(PLLSAI2) / PLLSAI2Q
+ *
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI2_DIVQ_CONFIG(__PLLSAI2Q__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q, (((__PLLSAI2Q__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos)
+
+#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */
+
+/** @brief Macro to configure the PLLSAI2 clock division factor R.
+ *
+ * @note This function must be used only when the PLLSAI2 is disabled.
+ * @note PLLSAI2 clock source is common with the main PLL (configured through
+ * __HAL_RCC_PLL_CONFIG() macro)
+ *
+ * @param __PLLSAI2R__ specifies the division factor.
+ * This parameter must be in the range (2, 4, 6 or 8).
+ * Use to set ADC clock frequency = f(PLLSAI2) / __PLLSAI2R__
+ *
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI2_DIVR_CONFIG(__PLLSAI2R__) \
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R, (((__PLLSAI2R__) >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos)
+
+/**
+ * @brief Macros to enable or disable the PLLSAI2.
+ * @note The PLLSAI2 is disabled by hardware when entering STOP and STANDBY modes.
+ * @retval None
+ */
+
+#define __HAL_RCC_PLLSAI2_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLSAI2ON)
+
+#define __HAL_RCC_PLLSAI2_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI2ON)
+
+/**
+ * @brief Macros to enable or disable each clock output (PLLSAI2_SAI2, PLLSAI2_ADC2 and RCC_PLLSAI2_DSICLK).
+ * @note Enabling and disabling those clocks can be done without the need to stop the PLL.
+ * This is mainly used to save Power.
+ * @param __PLLSAI2_CLOCKOUT__ specifies the PLLSAI2 clock to be output.
+ * This parameter can be one or a combination of the following values:
+ @if STM32L486xx
+ * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve
+ * high-quality audio performance on SAI interface in case.
+ * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral.
+ @endif
+ @if STM32L4A6xx
+ * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve
+ * high-quality audio performance on SAI interface in case.
+ * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral.
+ @endif
+ @if STM32L4S9xx
+ * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve
+ * high-quality audio performance on SAI interface in case.
+ * @arg @ref RCC_PLLSAI2_DSICLK Clock used to clock DSI peripheral.
+ @endif
+ * @retval None
+ */
+
+#define __HAL_RCC_PLLSAI2CLKOUT_ENABLE(__PLLSAI2_CLOCKOUT__) SET_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__))
+
+#define __HAL_RCC_PLLSAI2CLKOUT_DISABLE(__PLLSAI2_CLOCKOUT__) CLEAR_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__))
+
+/**
+ * @brief Macro to get clock output enable status (PLLSAI2_SAI2, PLLSAI2_ADC2 and RCC_PLLSAI2_DSICLK).
+ * @param __PLLSAI2_CLOCKOUT__ specifies the PLLSAI2 clock to be output.
+ * This parameter can be one of the following values:
+ @if STM32L486xx
+ * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve
+ * high-quality audio performance on SAI interface in case.
+ * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral.
+ @endif
+ @if STM32L4A6xx
+ * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve
+ * high-quality audio performance on SAI interface in case.
+ * @arg @ref RCC_PLLSAI2_ADC2CLK Clock used to clock ADC peripheral.
+ @endif
+ @if STM32L4S9xx
+ * @arg @ref RCC_PLLSAI2_SAI2CLK This clock is used to generate an accurate clock to achieve
+ * high-quality audio performance on SAI interface in case.
+ * @arg @ref RCC_PLLSAI2_DSICLK Clock used to clock DSI peripheral.
+ @endif
+ * @retval SET / RESET
+ */
+#define __HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(__PLLSAI2_CLOCKOUT__) READ_BIT(RCC->PLLSAI2CFGR, (__PLLSAI2_CLOCKOUT__))
+
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+#if defined(SAI1)
+
+/**
+ * @brief Macro to configure the SAI1 clock source.
+ * @param __SAI1_CLKSOURCE__ defines the SAI1 clock source. This clock is derived
+ * from the PLLSAI1, system PLL or external clock (through a dedicated pin).
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI1 SAI1 clock = PLLSAI1 "P" clock (PLLSAI1CLK)
+ @if STM32L486xx
+ * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI2 SAI1 clock = PLLSAI2 "P" clock (PLLSAI2CLK) for devices with PLLSAI2
+ @endif
+ * @arg @ref RCC_SAI1CLKSOURCE_PLL SAI1 clock = PLL "P" clock (PLLSAI3CLK if PLLSAI2 exists, else PLLSAI2CLK)
+ * @arg @ref RCC_SAI1CLKSOURCE_PIN SAI1 clock = External Clock (SAI1_EXTCLK)
+ @if STM32L4S9xx
+ * @arg @ref RCC_SAI1CLKSOURCE_HSI SAI1 clock = HSI16
+ @endif
+ *
+ @if STM32L443xx
+ * @note HSI16 is automatically set as SAI1 clock source when PLL are disabled for devices without PLLSAI2.
+ @endif
+ *
+ * @retval None
+ */
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define __HAL_RCC_SAI1_CONFIG(__SAI1_CLKSOURCE__)\
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SAI1SEL, (__SAI1_CLKSOURCE__))
+#else
+#define __HAL_RCC_SAI1_CONFIG(__SAI1_CLKSOURCE__)\
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SAI1SEL, (__SAI1_CLKSOURCE__))
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+/** @brief Macro to get the SAI1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI1 SAI1 clock = PLLSAI1 "P" clock (PLLSAI1CLK)
+ @if STM32L486xx
+ * @arg @ref RCC_SAI1CLKSOURCE_PLLSAI2 SAI1 clock = PLLSAI2 "P" clock (PLLSAI2CLK) for devices with PLLSAI2
+ @endif
+ * @arg @ref RCC_SAI1CLKSOURCE_PLL SAI1 clock = PLL "P" clock (PLLSAI3CLK if PLLSAI2 exists, else PLLSAI2CLK)
+ * @arg @ref RCC_SAI1CLKSOURCE_PIN SAI1 clock = External Clock (SAI1_EXTCLK)
+ *
+ * @note Despite returned values RCC_SAI1CLKSOURCE_PLLSAI1 or RCC_SAI1CLKSOURCE_PLL, HSI16 is automatically set as SAI1
+ * clock source when PLLs are disabled for devices without PLLSAI2.
+ *
+ */
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SAI1SEL))
+#else
+#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SAI1SEL))
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+#endif /* SAI1 */
+
+#if defined(SAI2)
+
+/**
+ * @brief Macro to configure the SAI2 clock source.
+ * @param __SAI2_CLKSOURCE__ defines the SAI2 clock source. This clock is derived
+ * from the PLLSAI2, system PLL or external clock (through a dedicated pin).
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI1 SAI2 clock = PLLSAI1 "P" clock (PLLSAI1CLK)
+ * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI2 SAI2 clock = PLLSAI2 "P" clock (PLLSAI2CLK)
+ * @arg @ref RCC_SAI2CLKSOURCE_PLL SAI2 clock = PLL "P" clock (PLLSAI3CLK)
+ * @arg @ref RCC_SAI2CLKSOURCE_PIN SAI2 clock = External Clock (SAI2_EXTCLK)
+ @if STM32L4S9xx
+ * @arg @ref RCC_SAI2CLKSOURCE_HSI SAI2 clock = HSI16
+ @endif
+ *
+ * @retval None
+ */
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define __HAL_RCC_SAI2_CONFIG(__SAI2_CLKSOURCE__ )\
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SAI2SEL, (__SAI2_CLKSOURCE__))
+#else
+#define __HAL_RCC_SAI2_CONFIG(__SAI2_CLKSOURCE__ )\
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SAI2SEL, (__SAI2_CLKSOURCE__))
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+/** @brief Macro to get the SAI2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI1 SAI2 clock = PLLSAI1 "P" clock (PLLSAI1CLK)
+ * @arg @ref RCC_SAI2CLKSOURCE_PLLSAI2 SAI2 clock = PLLSAI2 "P" clock (PLLSAI2CLK)
+ * @arg @ref RCC_SAI2CLKSOURCE_PLL SAI2 clock = PLL "P" clock (PLLSAI3CLK)
+ * @arg @ref RCC_SAI2CLKSOURCE_PIN SAI2 clock = External Clock (SAI2_EXTCLK)
+ */
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SAI2SEL))
+#else
+#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SAI2SEL))
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+#endif /* SAI2 */
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ *
+ * @param __I2C1_CLKSOURCE__ specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ * @retval None
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (__I2C1_CLKSOURCE__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C1CLKSOURCE_PCLK1 PCLK1 selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_HSI HSI selected as I2C1 clock
+ * @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C1SEL))
+
+#if defined(I2C2)
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ *
+ * @param __I2C2_CLKSOURCE__ specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_PCLK1 PCLK1 selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ * @retval None
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C2SEL, (__I2C2_CLKSOURCE__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C2CLKSOURCE_PCLK1 PCLK1 selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_HSI HSI selected as I2C2 clock
+ * @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C2SEL))
+
+#endif /* I2C2 */
+
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ *
+ * @param __I2C3_CLKSOURCE__ specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ * @retval None
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C3SEL, (__I2C3_CLKSOURCE__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C3CLKSOURCE_PCLK1 PCLK1 selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_HSI HSI selected as I2C3 clock
+ * @arg @ref RCC_I2C3CLKSOURCE_SYSCLK System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_I2C3SEL))
+
+#if defined(I2C4)
+
+/** @brief Macro to configure the I2C4 clock (I2C4CLK).
+ *
+ * @param __I2C4_CLKSOURCE__ specifies the I2C4 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_I2C4CLKSOURCE_PCLK1 PCLK1 selected as I2C4 clock
+ * @arg @ref RCC_I2C4CLKSOURCE_HSI HSI selected as I2C4 clock
+ * @arg @ref RCC_I2C4CLKSOURCE_SYSCLK System Clock selected as I2C4 clock
+ * @retval None
+ */
+#define __HAL_RCC_I2C4_CONFIG(__I2C4_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2C4SEL, (__I2C4_CLKSOURCE__))
+
+/** @brief Macro to get the I2C4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_I2C4CLKSOURCE_PCLK1 PCLK1 selected as I2C4 clock
+ * @arg @ref RCC_I2C4CLKSOURCE_HSI HSI selected as I2C4 clock
+ * @arg @ref RCC_I2C4CLKSOURCE_SYSCLK System Clock selected as I2C4 clock
+ */
+#define __HAL_RCC_GET_I2C4_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_I2C4SEL))
+
+#endif /* I2C4 */
+
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ *
+ * @param __USART1_CLKSOURCE__ specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE SE selected as USART1 clock
+ * @retval None
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (__USART1_CLKSOURCE__))
+
+/** @brief Macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART1CLKSOURCE_PCLK2 PCLK2 selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_HSI HSI selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_SYSCLK System Clock selected as USART1 clock
+ * @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART1SEL))
+
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ *
+ * @param __USART2_CLKSOURCE__ specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ * @retval None
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (__USART2_CLKSOURCE__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART2CLKSOURCE_PCLK1 PCLK1 selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_HSI HSI selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_SYSCLK System Clock selected as USART2 clock
+ * @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART2SEL))
+
+#if defined(USART3)
+
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ *
+ * @param __USART3_CLKSOURCE__ specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ * @retval None
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART3SEL, (__USART3_CLKSOURCE__))
+
+/** @brief Macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_USART3CLKSOURCE_PCLK1 PCLK1 selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_HSI HSI selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_SYSCLK System Clock selected as USART3 clock
+ * @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_USART3SEL))
+
+#endif /* USART3 */
+
+#if defined(UART4)
+
+/** @brief Macro to configure the UART4 clock (UART4CLK).
+ *
+ * @param __UART4_CLKSOURCE__ specifies the UART4 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock
+ * @retval None
+ */
+#define __HAL_RCC_UART4_CONFIG(__UART4_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_UART4SEL, (__UART4_CLKSOURCE__))
+
+/** @brief Macro to get the UART4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_UART4CLKSOURCE_PCLK1 PCLK1 selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_HSI HSI selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_SYSCLK System Clock selected as UART4 clock
+ * @arg @ref RCC_UART4CLKSOURCE_LSE LSE selected as UART4 clock
+ */
+#define __HAL_RCC_GET_UART4_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_UART4SEL))
+
+#endif /* UART4 */
+
+#if defined(UART5)
+
+/** @brief Macro to configure the UART5 clock (UART5CLK).
+ *
+ * @param __UART5_CLKSOURCE__ specifies the UART5 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock
+ * @retval None
+ */
+#define __HAL_RCC_UART5_CONFIG(__UART5_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_UART5SEL, (__UART5_CLKSOURCE__))
+
+/** @brief Macro to get the UART5 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_UART5CLKSOURCE_PCLK1 PCLK1 selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_HSI HSI selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_SYSCLK System Clock selected as UART5 clock
+ * @arg @ref RCC_UART5CLKSOURCE_LSE LSE selected as UART5 clock
+ */
+#define __HAL_RCC_GET_UART5_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_UART5SEL))
+
+#endif /* UART5 */
+
+/** @brief Macro to configure the LPUART1 clock (LPUART1CLK).
+ *
+ * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock
+ * @retval None
+ */
+#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (__LPUART1_CLKSOURCE__))
+
+/** @brief Macro to get the LPUART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_LPUART1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_HSI HSI selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_SYSCLK System Clock selected as LPUART1 clock
+ * @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock
+ */
+#define __HAL_RCC_GET_LPUART1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPUART1SEL))
+
+/** @brief Macro to configure the LPTIM1 clock (LPTIM1CLK).
+ *
+ * @param __LPTIM1_CLKSOURCE__ specifies the LPTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPTIM1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPTIM1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_HSI LSI selected as LPTIM1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock
+ * @retval None
+ */
+#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (__LPTIM1_CLKSOURCE__))
+
+/** @brief Macro to get the LPTIM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_LPTIM1CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_LSI HSI selected as LPUART1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_HSI System Clock selected as LPUART1 clock
+ * @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPUART1 clock
+ */
+#define __HAL_RCC_GET_LPTIM1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL))
+
+/** @brief Macro to configure the LPTIM2 clock (LPTIM2CLK).
+ *
+ * @param __LPTIM2_CLKSOURCE__ specifies the LPTIM2 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPTIM2 clock
+ * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPTIM2 clock
+ * @arg @ref RCC_LPTIM2CLKSOURCE_HSI LSI selected as LPTIM2 clock
+ * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock
+ * @retval None
+ */
+#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (__LPTIM2_CLKSOURCE__))
+
+/** @brief Macro to get the LPTIM2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_LPTIM2CLKSOURCE_PCLK1 PCLK1 selected as LPUART1 clock
+ * @arg @ref RCC_LPTIM2CLKSOURCE_LSI HSI selected as LPUART1 clock
+ * @arg @ref RCC_LPTIM2CLKSOURCE_HSI System Clock selected as LPUART1 clock
+ * @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPUART1 clock
+ */
+#define __HAL_RCC_GET_LPTIM2_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL))
+
+#if defined(SDMMC1)
+
+/** @brief Macro to configure the SDMMC1 clock.
+ *
+ @if STM32L486xx
+ * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source.
+ @endif
+ *
+ @if STM32L443xx
+ * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source.
+ @endif
+ *
+ * @param __SDMMC1_CLKSOURCE__ specifies the SDMMC1 clock source.
+ * This parameter can be one of the following values:
+ @if STM32L486xx
+ * @arg @ref RCC_SDMMC1CLKSOURCE_NONE No clock selected as SDMMC1 clock for devices without HSI48
+ * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock
+ @endif
+ @if STM32L443xx
+ * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48
+ * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock
+ @endif
+ @if STM32L4S9xx
+ * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48
+ * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" Clock selected as SDMMC1 clock
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLLP PLL "P" Clock selected as SDMMC1 clock
+ @endif
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLL PLL "Q" Clock selected as SDMMC1 clock
+ * @retval None
+ */
+#if defined(RCC_CCIPR2_SDMMCSEL)
+#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \
+ do \
+ { \
+ if((__SDMMC1_CLKSOURCE__) == RCC_SDMMC1CLKSOURCE_PLLP) \
+ { \
+ SET_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL); \
+ } \
+ else \
+ { \
+ CLEAR_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL); \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__SDMMC1_CLKSOURCE__)); \
+ } \
+ } while(0)
+#else
+#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__SDMMC1_CLKSOURCE__))
+#endif /* RCC_CCIPR2_SDMMCSEL */
+
+/** @brief Macro to get the SDMMC1 clock.
+ * @retval The clock source can be one of the following values:
+ @if STM32L486xx
+ * @arg @ref RCC_SDMMC1CLKSOURCE_NONE No clock selected as SDMMC1 clock for devices without HSI48
+ * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock
+ @endif
+ @if STM32L443xx
+ * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48
+ * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock
+ @endif
+ @if STM32L4S9xx
+ * @arg @ref RCC_SDMMC1CLKSOURCE_HSI48 HSI48 selected as SDMMC1 clock for devices with HSI48
+ * @arg @ref RCC_SDMMC1CLKSOURCE_MSI MSI selected as SDMMC1 clock
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as SDMMC1 clock
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLLP PLL "P" clock (PLLSAI3CLK) selected as SDMMC1 kernel clock
+ @endif
+ * @arg @ref RCC_SDMMC1CLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as SDMMC1 clock
+ */
+#if defined(RCC_CCIPR2_SDMMCSEL)
+#define __HAL_RCC_GET_SDMMC1_SOURCE() \
+ ((READ_BIT(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL) != 0U) ? RCC_SDMMC1CLKSOURCE_PLLP : (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL)))
+#else
+#define __HAL_RCC_GET_SDMMC1_SOURCE() \
+ (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL))
+#endif /* RCC_CCIPR2_SDMMCSEL */
+
+#endif /* SDMMC1 */
+
+/** @brief Macro to configure the RNG clock.
+ *
+ * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source.
+ *
+ * @param __RNG_CLKSOURCE__ specifies the RNG clock source.
+ * This parameter can be one of the following values:
+ @if STM32L486xx
+ * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock for devices without HSI48
+ @endif
+ @if STM32L443xx
+ * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock clock for devices with HSI48
+ @endif
+ * @arg @ref RCC_RNGCLKSOURCE_MSI MSI selected as RNG clock
+ * @arg @ref RCC_RNGCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as RNG clock
+ * @arg @ref RCC_RNGCLKSOURCE_PLL PLL Clock selected as RNG clock
+ * @retval None
+ */
+#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__RNG_CLKSOURCE__))
+
+/** @brief Macro to get the RNG clock.
+ * @retval The clock source can be one of the following values:
+ @if STM32L486xx
+ * @arg @ref RCC_RNGCLKSOURCE_NONE No clock selected as RNG clock for devices without HSI48
+ @endif
+ @if STM32L443xx
+ * @arg @ref RCC_RNGCLKSOURCE_HSI48 HSI48 selected as RNG clock clock for devices with HSI48
+ @endif
+ * @arg @ref RCC_RNGCLKSOURCE_MSI MSI selected as RNG clock
+ * @arg @ref RCC_RNGCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as RNG clock
+ * @arg @ref RCC_RNGCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as RNG clock
+ */
+#define __HAL_RCC_GET_RNG_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL))
+
+#if defined(USB_OTG_FS) || defined(USB)
+
+/** @brief Macro to configure the USB clock (USBCLK).
+ *
+ * @note USB, RNG and SDMMC1 peripherals share the same 48MHz clock source.
+ *
+ * @param __USB_CLKSOURCE__ specifies the USB clock source.
+ * This parameter can be one of the following values:
+ @if STM32L486xx
+ * @arg @ref RCC_USBCLKSOURCE_NONE No clock selected as 48MHz clock for devices without HSI48
+ @endif
+ @if STM32L443xx
+ * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as 48MHz clock for devices with HSI48
+ @endif
+ * @arg @ref RCC_USBCLKSOURCE_MSI MSI selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as USB clock
+ * @retval None
+ */
+#define __HAL_RCC_USB_CONFIG(__USB_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, (__USB_CLKSOURCE__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+ @if STM32L486xx
+ * @arg @ref RCC_USBCLKSOURCE_NONE No clock selected as 48MHz clock for devices without HSI48
+ @endif
+ @if STM32L443xx
+ * @arg @ref RCC_USBCLKSOURCE_HSI48 HSI48 selected as 48MHz clock for devices with HSI48
+ @endif
+ * @arg @ref RCC_USBCLKSOURCE_MSI MSI selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLLSAI1 PLLSAI1 "Q" clock (PLL48M2CLK) selected as USB clock
+ * @arg @ref RCC_USBCLKSOURCE_PLL PLL "Q" clock (PLL48M1CLK) selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL))
+
+#endif /* USB_OTG_FS || USB */
+
+#if defined(RCC_CCIPR_ADCSEL)
+
+/** @brief Macro to configure the ADC interface clock.
+ * @param __ADC_CLKSOURCE__ specifies the ADC digital interface clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock
+ * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock
+ @if STM32L486xx
+ * @arg @ref RCC_ADCCLKSOURCE_PLLSAI2 PLLSAI2 Clock selected as ADC clock for STM32L47x/STM32L48x/STM32L49x/STM32L4Ax devices
+ @endif
+ * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock
+ * @retval None
+ */
+#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (__ADC_CLKSOURCE__))
+
+/** @brief Macro to get the ADC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock
+ * @arg @ref RCC_ADCCLKSOURCE_PLLSAI1 PLLSAI1 Clock selected as ADC clock
+ @if STM32L486xx
+ * @arg @ref RCC_ADCCLKSOURCE_PLLSAI2 PLLSAI2 Clock selected as ADC clock for STM32L47x/STM32L48x/STM32L49x/STM32L4Ax devices
+ @endif
+ * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock
+ */
+#define __HAL_RCC_GET_ADC_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_ADCSEL))
+#else
+
+/** @brief Macro to get the ADC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_ADCCLKSOURCE_NONE No clock selected as ADC clock
+ * @arg @ref RCC_ADCCLKSOURCE_SYSCLK System Clock selected as ADC clock
+ */
+#define __HAL_RCC_GET_ADC_SOURCE() ((__HAL_RCC_ADC_IS_CLK_ENABLED() != 0U) ? RCC_ADCCLKSOURCE_SYSCLK : RCC_ADCCLKSOURCE_NONE)
+
+#endif /* RCC_CCIPR_ADCSEL */
+
+#if defined(SWPMI1)
+
+/** @brief Macro to configure the SWPMI1 clock.
+ * @param __SWPMI1_CLKSOURCE__ specifies the SWPMI1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_SWPMI1CLKSOURCE_PCLK1 PCLK1 Clock selected as SWPMI1 clock
+ * @arg @ref RCC_SWPMI1CLKSOURCE_HSI HSI Clock selected as SWPMI1 clock
+ * @retval None
+ */
+#define __HAL_RCC_SWPMI1_CONFIG(__SWPMI1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL, (__SWPMI1_CLKSOURCE__))
+
+/** @brief Macro to get the SWPMI1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_SWPMI1CLKSOURCE_PCLK1 PCLK1 Clock selected as SWPMI1 clock
+ * @arg @ref RCC_SWPMI1CLKSOURCE_HSI HSI Clock selected as SWPMI1 clock
+ */
+#define __HAL_RCC_GET_SWPMI1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL))
+
+#endif /* SWPMI1 */
+
+#if defined(DFSDM1_Filter0)
+/** @brief Macro to configure the DFSDM1 clock.
+ * @param __DFSDM1_CLKSOURCE__ specifies the DFSDM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_DFSDM1CLKSOURCE_PCLK2 PCLK2 Clock selected as DFSDM1 clock
+ * @arg @ref RCC_DFSDM1CLKSOURCE_SYSCLK System Clock selected as DFSDM1 clock
+ * @retval None
+ */
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL, (__DFSDM1_CLKSOURCE__))
+#else
+#define __HAL_RCC_DFSDM1_CONFIG(__DFSDM1_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL, (__DFSDM1_CLKSOURCE__))
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+/** @brief Macro to get the DFSDM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_DFSDM1CLKSOURCE_PCLK2 PCLK2 Clock selected as DFSDM1 clock
+ * @arg @ref RCC_DFSDM1CLKSOURCE_SYSCLK System Clock selected as DFSDM1 clock
+ */
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define __HAL_RCC_GET_DFSDM1_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL))
+#else
+#define __HAL_RCC_GET_DFSDM1_SOURCE() (READ_BIT(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL))
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+
+/** @brief Macro to configure the DFSDM1 audio clock.
+ * @param __DFSDM1AUDIO_CLKSOURCE__ specifies the DFSDM1 audio clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_SAI1 SAI1 clock selected as DFSDM1 audio clock
+ * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_HSI HSI clock selected as DFSDM1 audio clock
+ * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_MSI MSI clock selected as DFSDM1 audio clock
+ * @retval None
+ */
+#define __HAL_RCC_DFSDM1AUDIO_CONFIG(__DFSDM1AUDIO_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL, (__DFSDM1AUDIO_CLKSOURCE__))
+
+/** @brief Macro to get the DFSDM1 audio clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_SAI1 SAI1 clock selected as DFSDM1 audio clock
+ * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_HSI HSI clock selected as DFSDM1 audio clock
+ * @arg @ref RCC_DFSDM1AUDIOCLKSOURCE_MSI MSI clock selected as DFSDM1 audio clock
+ */
+#define __HAL_RCC_GET_DFSDM1AUDIO_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL))
+
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+#endif /* DFSDM1_Filter0 */
+
+#if defined(LTDC)
+
+/** @brief Macro to configure the LTDC clock.
+ * @param __LTDC_CLKSOURCE__ specifies the DSI clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 PLLSAI2 divider R divided by 2 clock selected as LTDC clock
+ * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 PLLSAI2 divider R divided by 4 clock selected as LTDC clock
+ * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 PLLSAI2 divider R divided by 8 clock selected as LTDC clock
+ * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 PLLSAI2 divider R divided by 16 clock selected as LTDC clock
+ * @retval None
+ */
+#define __HAL_RCC_LTDC_CONFIG(__LTDC_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, (__LTDC_CLKSOURCE__))
+
+/** @brief Macro to get the LTDC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV2 PLLSAI2 divider R divided by 2 clock selected as LTDC clock
+ * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV4 PLLSAI2 divider R divided by 4 clock selected as LTDC clock
+ * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV8 PLLSAI2 divider R divided by 8 clock selected as LTDC clock
+ * @arg @ref RCC_LTDCCLKSOURCE_PLLSAI2_DIV16 PLLSAI2 divider R divided by 16 clock selected as LTDC clock
+ */
+#define __HAL_RCC_GET_LTDC_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR))
+
+#endif /* LTDC */
+
+#if defined(DSI)
+
+/** @brief Macro to configure the DSI clock.
+ * @param __DSI_CLKSOURCE__ specifies the DSI clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_DSICLKSOURCE_DSIPHY DSI-PHY clock selected as DSI clock
+ * @arg @ref RCC_DSICLKSOURCE_PLLSAI2 PLLSAI2 R divider clock selected as DSI clock
+ * @retval None
+ */
+#define __HAL_RCC_DSI_CONFIG(__DSI_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DSISEL, (__DSI_CLKSOURCE__))
+
+/** @brief Macro to get the DSI clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_DSICLKSOURCE_DSIPHY DSI-PHY clock selected as DSI clock
+ * @arg @ref RCC_DSICLKSOURCE_PLLSAI2 PLLSAI2 R divider clock selected as DSI clock
+ */
+#define __HAL_RCC_GET_DSI_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_DSISEL))
+
+#endif /* DSI */
+
+#if defined(OCTOSPI1) || defined(OCTOSPI2)
+
+/** @brief Macro to configure the OctoSPI clock.
+ * @param __OSPI_CLKSOURCE__ specifies the OctoSPI clock source.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_OSPICLKSOURCE_SYSCLK System Clock selected as OctoSPI clock
+ * @arg @ref RCC_OSPICLKSOURCE_MSI MSI clock selected as OctoSPI clock
+ * @arg @ref RCC_OSPICLKSOURCE_PLL PLL Q divider clock selected as OctoSPI clock
+ * @retval None
+ */
+#define __HAL_RCC_OSPI_CONFIG(__OSPI_CLKSOURCE__) \
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_OSPISEL, (__OSPI_CLKSOURCE__))
+
+/** @brief Macro to get the OctoSPI clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_OSPICLKSOURCE_SYSCLK System Clock selected as OctoSPI clock
+ * @arg @ref RCC_OSPICLKSOURCE_MSI MSI clock selected as OctoSPI clock
+ * @arg @ref RCC_OSPICLKSOURCE_PLL PLL Q divider clock selected as OctoSPI clock
+ */
+#define __HAL_RCC_GET_OSPI_SOURCE() (READ_BIT(RCC->CCIPR2, RCC_CCIPR2_OSPISEL))
+
+#endif /* OCTOSPI1 || OCTOSPI2 */
+
+/** @defgroup RCCEx_Flags_Interrupts_Management Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+#if defined(RCC_PLLSAI1_SUPPORT)
+
+/** @brief Enable PLLSAI1RDY interrupt.
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI1_ENABLE_IT() SET_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE)
+
+/** @brief Disable PLLSAI1RDY interrupt.
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI1_DISABLE_IT() CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE)
+
+/** @brief Clear the PLLSAI1RDY interrupt pending bit.
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI1_CLEAR_IT() WRITE_REG(RCC->CICR, RCC_CICR_PLLSAI1RDYC)
+
+/** @brief Check whether PLLSAI1RDY interrupt has occurred or not.
+ * @retval TRUE or FALSE.
+ */
+#define __HAL_RCC_PLLSAI1_GET_IT_SOURCE() (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI1RDYF) == RCC_CIFR_PLLSAI1RDYF)
+
+/** @brief Check whether the PLLSAI1RDY flag is set or not.
+ * @retval TRUE or FALSE.
+ */
+#define __HAL_RCC_PLLSAI1_GET_FLAG() (READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == (RCC_CR_PLLSAI1RDY))
+
+#endif /* RCC_PLLSAI1_SUPPORT */
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+
+/** @brief Enable PLLSAI2RDY interrupt.
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI2_ENABLE_IT() SET_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE)
+
+/** @brief Disable PLLSAI2RDY interrupt.
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI2_DISABLE_IT() CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE)
+
+/** @brief Clear the PLLSAI2RDY interrupt pending bit.
+ * @retval None
+ */
+#define __HAL_RCC_PLLSAI2_CLEAR_IT() WRITE_REG(RCC->CICR, RCC_CICR_PLLSAI2RDYC)
+
+/** @brief Check whether the PLLSAI2RDY interrupt has occurred or not.
+ * @retval TRUE or FALSE.
+ */
+#define __HAL_RCC_PLLSAI2_GET_IT_SOURCE() (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI2RDYF) == RCC_CIFR_PLLSAI2RDYF)
+
+/** @brief Check whether the PLLSAI2RDY flag is set or not.
+ * @retval TRUE or FALSE.
+ */
+#define __HAL_RCC_PLLSAI2_GET_FLAG() (READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == (RCC_CR_PLLSAI2RDY))
+
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+
+/**
+ * @brief Enable the RCC LSE CSS Extended Interrupt Line.
+ * @retval None
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Disable the RCC LSE CSS Extended Interrupt Line.
+ * @retval None
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR1, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Enable the RCC LSE CSS Event Line.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Disable the RCC LSE CSS Event Line.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR1, RCC_EXTI_LINE_LSECSS)
+
+
+/**
+ * @brief Enable the RCC LSE CSS Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS)
+
+
+/**
+ * @brief Disable the RCC LSE CSS Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR1, RCC_EXTI_LINE_LSECSS)
+
+
+/**
+ * @brief Enable the RCC LSE CSS Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Disable the RCC LSE CSS Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR1, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Enable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_FALLING_EDGE() \
+ do { \
+ __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); \
+ __HAL_RCC_LSECSS_EXTI_ENABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Disable the RCC LSE CSS Extended Interrupt Rising & Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_FALLING_EDGE() \
+ do { \
+ __HAL_RCC_LSECSS_EXTI_DISABLE_RISING_EDGE(); \
+ __HAL_RCC_LSECSS_EXTI_DISABLE_FALLING_EDGE(); \
+ } while(0)
+
+/**
+ * @brief Check whether the specified RCC LSE CSS EXTI interrupt flag is set or not.
+ * @retval EXTI RCC LSE CSS Line Status.
+ */
+#define __HAL_RCC_LSECSS_EXTI_GET_FLAG() (READ_BIT(EXTI->PR1, RCC_EXTI_LINE_LSECSS) == RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Clear the RCC LSE CSS EXTI flag.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR1, RCC_EXTI_LINE_LSECSS)
+
+/**
+ * @brief Generate a Software interrupt on the RCC LSE CSS EXTI line.
+ * @retval None.
+ */
+#define __HAL_RCC_LSECSS_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, RCC_EXTI_LINE_LSECSS)
+
+
+#if defined(CRS)
+
+/**
+ * @brief Enable the specified CRS interrupts.
+ * @param __INTERRUPT__ specifies the CRS interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) SET_BIT(CRS->CR, (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CRS interrupts.
+ * @param __INTERRUPT__ specifies the CRS interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(CRS->CR, (__INTERRUPT__))
+
+/** @brief Check whether the CRS interrupt has occurred or not.
+ * @param __INTERRUPT__ specifies the CRS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((READ_BIT(CRS->CR, (__INTERRUPT__)) != 0U) ? SET : RESET)
+
+/** @brief Clear the CRS interrupt pending bits
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg @ref RCC_CRS_IT_SYNCOK SYNC event OK interrupt
+ * @arg @ref RCC_CRS_IT_SYNCWARN SYNC warning interrupt
+ * @arg @ref RCC_CRS_IT_ERR Synchronization or trimming error interrupt
+ * @arg @ref RCC_CRS_IT_ESYNC Expected SYNC interrupt
+ * @arg @ref RCC_CRS_IT_TRIMOVF Trimming overflow or underflow interrupt
+ * @arg @ref RCC_CRS_IT_SYNCERR SYNC error interrupt
+ * @arg @ref RCC_CRS_IT_SYNCMISS SYNC missed interrupt
+ */
+/* CRS IT Error Mask */
+#define RCC_CRS_IT_ERROR_MASK (RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS)
+
+#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \
+ if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__INTERRUPT__)); \
+ } \
+ } while(0)
+
+/**
+ * @brief Check whether the specified CRS flag is set or not.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK
+ * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning
+ * @arg @ref RCC_CRS_FLAG_ERR Error
+ * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC
+ * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow
+ * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error
+ * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed
+ * @retval The new state of _FLAG_ (TRUE or FALSE).
+ */
+#define __HAL_RCC_CRS_GET_FLAG(__FLAG__) (READ_BIT(CRS->ISR, (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the CRS specified FLAG.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg @ref RCC_CRS_FLAG_SYNCOK SYNC event OK
+ * @arg @ref RCC_CRS_FLAG_SYNCWARN SYNC warning
+ * @arg @ref RCC_CRS_FLAG_ERR Error
+ * @arg @ref RCC_CRS_FLAG_ESYNC Expected SYNC
+ * @arg @ref RCC_CRS_FLAG_TRIMOVF Trimming overflow or underflow
+ * @arg @ref RCC_CRS_FLAG_SYNCERR SYNC error
+ * @arg @ref RCC_CRS_FLAG_SYNCMISS SYNC missed
+ * @note RCC_CRS_FLAG_ERR clears RCC_CRS_FLAG_TRIMOVF, RCC_CRS_FLAG_SYNCERR, RCC_CRS_FLAG_SYNCMISS and consequently RCC_CRS_FLAG_ERR
+ * @retval None
+ */
+
+/* CRS Flag Error Mask */
+#define RCC_CRS_FLAG_ERROR_MASK (RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS)
+
+#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \
+ if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__FLAG__)); \
+ } \
+ } while(0)
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features
+ * @{
+ */
+/**
+ * @brief Enable the oscillator clock for frequency error counter.
+ * @note when the CEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE() SET_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+ * @brief Disable the oscillator clock for frequency error counter.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_CEN)
+
+/**
+ * @brief Enable the automatic hardware adjustement of TRIM bits.
+ * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE() SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Enable or disable the automatic hardware adjustement of TRIM bits.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE() CLEAR_BIT(CRS->CR, CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
+ * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency
+ * of the synchronization source after prescaling. It is then decreased by one in order to
+ * reach the expected synchronization on the zero value. The formula is the following:
+ * RELOAD = (fTARGET / fSYNC) -1
+ * @param __FTARGET__ Target frequency (value in Hz)
+ * @param __FSYNC__ Synchronization signal frequency (value in Hz)
+ * @retval None
+ */
+#define __HAL_RCC_CRS_RELOADVALUE_CALCULATE(__FTARGET__, __FSYNC__) (((__FTARGET__) / (__FSYNC__)) - 1U)
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group2
+ * @{
+ */
+#if defined(RCC_PLLSAI1_SUPPORT)
+
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI1(RCC_PLLSAI1InitTypeDef *PLLSAI1Init);
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void);
+
+#endif /* RCC_PLLSAI1_SUPPORT */
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+
+HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI2(RCC_PLLSAI2InitTypeDef *PLLSAI2Init);
+HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI2(void);
+
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk);
+void HAL_RCCEx_StandbyMSIRangeConfig(uint32_t MSIRange);
+void HAL_RCCEx_EnableLSECSS(void);
+void HAL_RCCEx_DisableLSECSS(void);
+void HAL_RCCEx_EnableLSECSS_IT(void);
+void HAL_RCCEx_LSECSS_IRQHandler(void);
+void HAL_RCCEx_LSECSS_Callback(void);
+void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource);
+void HAL_RCCEx_DisableLSCO(void);
+void HAL_RCCEx_EnableMSIPLLMode(void);
+void HAL_RCCEx_DisableMSIPLLMode(void);
+
+/**
+ * @}
+ */
+
+#if defined(CRS)
+
+/** @addtogroup RCCEx_Exported_Functions_Group3
+ * @{
+ */
+
+void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
+void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
+void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+void HAL_RCCEx_CRS_IRQHandler(void);
+void HAL_RCCEx_CRS_SyncOkCallback(void);
+void HAL_RCCEx_CRS_SyncWarnCallback(void);
+void HAL_RCCEx_CRS_ExpectedSyncCallback(void);
+void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error);
+
+/**
+ * @}
+ */
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Macros
+ * @{
+ */
+
+#define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_LSCOSOURCE_LSE))
+
+#if defined(STM32L412xx) || defined(STM32L422xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG))
+
+#elif defined(STM32L431xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1))
+
+#elif defined(STM32L432xx) || defined(STM32L442xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG))
+
+#elif defined(STM32L433xx) || defined(STM32L443xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1))
+
+#elif defined(STM32L451xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1))
+
+#elif defined(STM32L452xx) || defined(STM32L462xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1))
+
+#elif defined(STM32L471xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1))
+
+#elif defined(STM32L496xx) || defined(STM32L4A6xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1))
+
+#elif defined(STM32L4R5xx) || defined(STM32L4S5xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1AUDIO) == RCC_PERIPHCLK_DFSDM1AUDIO) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI))
+
+#elif defined(STM32L4R7xx) || defined(STM32L4S7xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1AUDIO) == RCC_PERIPHCLK_DFSDM1AUDIO) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC))
+
+#elif defined(STM32L4R9xx) || defined(STM32L4S9xx)
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1AUDIO) == RCC_PERIPHCLK_DFSDM1AUDIO) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DSI) == RCC_PERIPHCLK_DSI))
+
+#else
+
+#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1))
+
+#endif /* STM32L412xx || STM32L422xx */
+
+#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI))
+
+#define IS_RCC_USART2CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI))
+
+#if defined(USART3)
+
+#define IS_RCC_USART3CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI))
+
+#endif /* USART3 */
+
+#if defined(UART4)
+
+#define IS_RCC_UART4CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_UART4CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_UART4CLKSOURCE_HSI))
+
+#endif /* UART4 */
+
+#if defined(UART5)
+
+#define IS_RCC_UART5CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_UART5CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_UART5CLKSOURCE_HSI))
+
+#endif /* UART5 */
+
+#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI))
+
+#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK)|| \
+ ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI))
+
+#if defined(I2C2)
+
+#define IS_RCC_I2C2CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_I2C2CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_I2C2CLKSOURCE_SYSCLK)|| \
+ ((__SOURCE__) == RCC_I2C2CLKSOURCE_HSI))
+
+#endif /* I2C2 */
+
+#define IS_RCC_I2C3CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_I2C3CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_I2C3CLKSOURCE_SYSCLK)|| \
+ ((__SOURCE__) == RCC_I2C3CLKSOURCE_HSI))
+
+#if defined(I2C4)
+
+#define IS_RCC_I2C4CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_I2C4CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_I2C4CLKSOURCE_SYSCLK)|| \
+ ((__SOURCE__) == RCC_I2C4CLKSOURCE_HSI))
+
+#endif /* I2C4 */
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define IS_RCC_SAI1CLK(__SOURCE__) \
+ (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI2) || \
+ ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN) || \
+ ((__SOURCE__) == RCC_SAI1CLKSOURCE_HSI))
+#else
+#define IS_RCC_SAI1CLK(__SOURCE__) \
+ (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI2) || \
+ ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN))
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+#elif defined(RCC_PLLSAI1_SUPPORT)
+
+#define IS_RCC_SAI1CLK(__SOURCE__) \
+ (((__SOURCE__) == RCC_SAI1CLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_SAI1CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_SAI1CLKSOURCE_PIN))
+
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+#define IS_RCC_SAI2CLK(__SOURCE__) \
+ (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI2) || \
+ ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN) || \
+ ((__SOURCE__) == RCC_SAI2CLKSOURCE_HSI))
+#else
+#define IS_RCC_SAI2CLK(__SOURCE__) \
+ (((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLLSAI2) || \
+ ((__SOURCE__) == RCC_SAI2CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_SAI2CLKSOURCE_PIN))
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+#define IS_RCC_LPTIM1CLK(__SOURCE__) \
+ (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE))
+
+#define IS_RCC_LPTIM2CLK(__SOURCE__) \
+ (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE))
+
+#if defined(SDMMC1)
+#if defined(RCC_HSI48_SUPPORT) && defined(RCC_CCIPR2_SDMMCSEL)
+
+#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLP) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_HSI48) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI))
+
+#elif defined(RCC_HSI48_SUPPORT)
+
+#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_HSI48) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI))
+#else
+
+#define IS_RCC_SDMMC1CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_SDMMC1CLKSOURCE_NONE) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_SDMMC1CLKSOURCE_MSI))
+
+#endif /* RCC_HSI48_SUPPORT */
+#endif /* SDMMC1 */
+
+#if defined(RCC_HSI48_SUPPORT)
+
+#if defined(RCC_PLLSAI1_SUPPORT)
+#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI))
+#else
+#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_RNGCLKSOURCE_HSI48) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI))
+#endif /* RCC_PLLSAI1_SUPPORT */
+
+#else
+
+#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_MSI))
+
+#endif /* RCC_HSI48_SUPPORT */
+
+#if defined(USB_OTG_FS) || defined(USB)
+#if defined(RCC_HSI48_SUPPORT)
+
+#if defined(RCC_PLLSAI1_SUPPORT)
+#define IS_RCC_USBCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_MSI))
+#else
+#define IS_RCC_USBCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_MSI))
+#endif /* RCC_PLLSAI1_SUPPORT */
+
+#else
+
+#define IS_RCC_USBCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_USBCLKSOURCE_NONE) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_MSI))
+
+#endif /* RCC_HSI48_SUPPORT */
+#endif /* USB_OTG_FS || USB */
+
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx)
+
+#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \
+ ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI2) || \
+ ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK))
+
+#else
+
+#if defined(RCC_PLLSAI1_SUPPORT)
+#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \
+ ((__SOURCE__) == RCC_ADCCLKSOURCE_PLLSAI1) || \
+ ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK))
+#else
+#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_ADCCLKSOURCE_NONE) || \
+ ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK))
+#endif /* RCC_PLLSAI1_SUPPORT */
+
+#endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */
+
+#if defined(SWPMI1)
+
+#define IS_RCC_SWPMI1CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_SWPMI1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_SWPMI1CLKSOURCE_HSI))
+
+#endif /* SWPMI1 */
+
+#if defined(DFSDM1_Filter0)
+
+#define IS_RCC_DFSDM1CLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_DFSDM1CLKSOURCE_PCLK2) || \
+ ((__SOURCE__) == RCC_DFSDM1CLKSOURCE_SYSCLK))
+
+#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+
+#define IS_RCC_DFSDM1AUDIOCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_SAI1) || \
+ ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_DFSDM1AUDIOCLKSOURCE_MSI))
+
+#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+#endif /* DFSDM1_Filter0 */
+
+#if defined(LTDC)
+
+#define IS_RCC_LTDCCLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV2) || \
+ ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV4) || \
+ ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV8) || \
+ ((__SOURCE__) == RCC_LTDCCLKSOURCE_PLLSAI2_DIV16))
+
+#endif /* LTDC */
+
+#if defined(DSI)
+
+#define IS_RCC_DSICLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_DSICLKSOURCE_DSIPHY) || \
+ ((__SOURCE__) == RCC_DSICLKSOURCE_PLLSAI2))
+
+#endif /* DSI */
+
+#if defined(OCTOSPI1) || defined(OCTOSPI2)
+
+#define IS_RCC_OSPICLKSOURCE(__SOURCE__) \
+ (((__SOURCE__) == RCC_OSPICLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_OSPICLKSOURCE_MSI) || \
+ ((__SOURCE__) == RCC_OSPICLKSOURCE_PLL))
+
+#endif /* OCTOSPI1 || OCTOSPI2 */
+
+#if defined(RCC_PLLSAI1_SUPPORT)
+
+#define IS_RCC_PLLSAI1SOURCE(__VALUE__) IS_RCC_PLLSOURCE(__VALUE__)
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+#define IS_RCC_PLLSAI1M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U))
+#else
+#define IS_RCC_PLLSAI1M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U))
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
+
+#define IS_RCC_PLLSAI1N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U))
+
+#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+#define IS_RCC_PLLSAI1P_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U))
+#else
+#define IS_RCC_PLLSAI1P_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U))
+#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
+
+#define IS_RCC_PLLSAI1Q_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \
+ ((__VALUE__) == 6U) || ((__VALUE__) == 8U))
+
+#define IS_RCC_PLLSAI1R_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \
+ ((__VALUE__) == 6U) || ((__VALUE__) == 8U))
+
+#endif /* RCC_PLLSAI1_SUPPORT */
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+
+#define IS_RCC_PLLSAI2SOURCE(__VALUE__) IS_RCC_PLLSOURCE(__VALUE__)
+
+#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT)
+#define IS_RCC_PLLSAI2M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 16U))
+#else
+#define IS_RCC_PLLSAI2M_VALUE(__VALUE__) ((1U <= (__VALUE__)) && ((__VALUE__) <= 8U))
+#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */
+
+#define IS_RCC_PLLSAI2N_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U))
+
+#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
+#define IS_RCC_PLLSAI2P_VALUE(__VALUE__) (((__VALUE__) >= 2U) && ((__VALUE__) <= 31U))
+#else
+#define IS_RCC_PLLSAI2P_VALUE(__VALUE__) (((__VALUE__) == 7U) || ((__VALUE__) == 17U))
+#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */
+
+#if defined(RCC_PLLSAI2Q_DIV_SUPPORT)
+#define IS_RCC_PLLSAI2Q_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \
+ ((__VALUE__) == 6U) || ((__VALUE__) == 8U))
+#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */
+
+#define IS_RCC_PLLSAI2R_VALUE(__VALUE__) (((__VALUE__) == 2U) || ((__VALUE__) == 4U) || \
+ ((__VALUE__) == 6U) || ((__VALUE__) == 8U))
+
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+#if defined(CRS)
+
+#define IS_RCC_CRS_SYNC_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_CRS_SYNC_SOURCE_GPIO) || \
+ ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_LSE) || \
+ ((__SOURCE__) == RCC_CRS_SYNC_SOURCE_USB))
+
+#define IS_RCC_CRS_SYNC_DIV(__DIV__) (((__DIV__) == RCC_CRS_SYNC_DIV1) || ((__DIV__) == RCC_CRS_SYNC_DIV2) || \
+ ((__DIV__) == RCC_CRS_SYNC_DIV4) || ((__DIV__) == RCC_CRS_SYNC_DIV8) || \
+ ((__DIV__) == RCC_CRS_SYNC_DIV16) || ((__DIV__) == RCC_CRS_SYNC_DIV32) || \
+ ((__DIV__) == RCC_CRS_SYNC_DIV64) || ((__DIV__) == RCC_CRS_SYNC_DIV128))
+
+#define IS_RCC_CRS_SYNC_POLARITY(__POLARITY__) (((__POLARITY__) == RCC_CRS_SYNC_POLARITY_RISING) || \
+ ((__POLARITY__) == RCC_CRS_SYNC_POLARITY_FALLING))
+
+#define IS_RCC_CRS_RELOADVALUE(__VALUE__) (((__VALUE__) <= 0xFFFFU))
+
+#define IS_RCC_CRS_ERRORLIMIT(__VALUE__) (((__VALUE__) <= 0xFFU))
+
+#define IS_RCC_CRS_HSI48CALIBRATION(__VALUE__) (((__VALUE__) <= 0x3FU))
+
+#define IS_RCC_CRS_FREQERRORDIR(__DIR__) (((__DIR__) == RCC_CRS_FREQERRORDIR_UP) || \
+ ((__DIR__) == RCC_CRS_FREQERRORDIR_DOWN))
+
+#endif /* CRS */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|