diff options
Diffstat (limited to 'FreeRTOS/Demo/WIN32-MSVC-lwIP/lwIP_Apps/lwipopts.h')
| -rw-r--r-- | FreeRTOS/Demo/WIN32-MSVC-lwIP/lwIP_Apps/lwipopts.h | 302 |
1 files changed, 0 insertions, 302 deletions
diff --git a/FreeRTOS/Demo/WIN32-MSVC-lwIP/lwIP_Apps/lwipopts.h b/FreeRTOS/Demo/WIN32-MSVC-lwIP/lwIP_Apps/lwipopts.h deleted file mode 100644 index fb6adccfb..000000000 --- a/FreeRTOS/Demo/WIN32-MSVC-lwIP/lwIP_Apps/lwipopts.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - * Copyright (c) 2001-2003 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * This file is part of the lwIP TCP/IP stack. - * - * Author: Adam Dunkels <adam@sics.se> - * - */ -#ifndef __LWIPOPTS_H__ -#define __LWIPOPTS_H__ - -/* Functions used to obtain and release exclusive access to the Tx buffer. The -Get function will block if the Tx buffer is not available - use with care! */ -signed char *pcLwipBlockingGetTxBuffer( void ); -void vLwipAppsReleaseTxBuffer( void ); - - -/* SSI options. */ -#define TCPIP_THREAD_NAME "tcpip" -#define LWIP_HTTPD_MAX_TAG_NAME_LEN 20 -#define LWIP_HTTPD_MAX_TAG_INSERT_LEN 1024 -#define TCPIP_THREAD_PRIO configLWIP_TASK_PRIORITY -#define TCPIP_THREAD_STACKSIZE configMINIMAL_STACK_SIZE * 3 - -#define DEFAULT_TCP_RECVMBOX_SIZE 5 -#define DEFAULT_ACCEPTMBOX_SIZE 5 -#define TCPIP_MBOX_SIZE 10 - -#define NO_SYS 0 -#define LWIP_SOCKET (NO_SYS==0) -#define LWIP_NETCONN 1 - -#define LWIP_SNMP 0 -#define LWIP_IGMP 0 -#define LWIP_ICMP 1 - -/* DNS is not going to be used as this is a simple local example. */ -#define LWIP_DNS 0 - -#define LWIP_HAVE_LOOPIF 0 -#define TCP_LISTEN_BACKLOG 0 -#define LWIP_SO_RCVTIMEO 1 -#define LWIP_SO_RCVBUF 1 - -#ifdef LWIP_DEBUG - -#define LWIP_DBG_MIN_LEVEL 0 -#define PPP_DEBUG LWIP_DBG_ON -#define MEM_DEBUG LWIP_DBG_ON -#define MEMP_DEBUG LWIP_DBG_ON -#define PBUF_DEBUG LWIP_DBG_ON -#define API_LIB_DEBUG LWIP_DBG_ON -#define API_MSG_DEBUG LWIP_DBG_ON -#define TCPIP_DEBUG LWIP_DBG_ON -#define NETIF_DEBUG LWIP_DBG_ON -#define SOCKETS_DEBUG LWIP_DBG_ON -#define DNS_DEBUG LWIP_DBG_ON -#define AUTOIP_DEBUG LWIP_DBG_ON -#define DHCP_DEBUG LWIP_DBG_ON -#define IP_DEBUG LWIP_DBG_ON -#define IP_REASS_DEBUG LWIP_DBG_ON -#define ICMP_DEBUG LWIP_DBG_ON -#define IGMP_DEBUG LWIP_DBG_ON -#define UDP_DEBUG LWIP_DBG_ON -#define TCP_DEBUG LWIP_DBG_ON -#define TCP_INPUT_DEBUG LWIP_DBG_ON -#define TCP_OUTPUT_DEBUG LWIP_DBG_ON -#define TCP_RTO_DEBUG LWIP_DBG_ON -#define TCP_CWND_DEBUG LWIP_DBG_ON -#define TCP_WND_DEBUG LWIP_DBG_ON -#define TCP_FR_DEBUG LWIP_DBG_ON -#define TCP_QLEN_DEBUG LWIP_DBG_ON -#define TCP_RST_DEBUG LWIP_DBG_ON -#endif - -#define LWIP_DBG_TYPES_ON (LWIP_DBG_ON|LWIP_DBG_TRACE|LWIP_DBG_STATE|LWIP_DBG_FRESH|LWIP_DBG_HALT) - - - -/* ---------- Memory options ---------- */ -/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which - lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 - byte alignment -> define MEM_ALIGNMENT to 2. */ -/* MSVC port: intel processors don't need 4-byte alignment, - but are faster that way! */ -#define MEM_ALIGNMENT 4 - -/* MEM_SIZE: the size of the heap memory. If the application will send -a lot of data that needs to be copied, this should be set high. */ -#define MEM_SIZE 10240 - -/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application - sends a lot of data out of ROM (or other static memory), this - should be set high. */ -#define MEMP_NUM_PBUF 10 - -/* MEMP_NUM_RAW_PCB: the number of UDP protocol control blocks. One - per active RAW "connection". */ -#define LWIP_RAW 0 -#define MEMP_NUM_RAW_PCB 0 - -/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One - per active UDP "connection". */ -#define MEMP_NUM_UDP_PCB 2 - -/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP - connections. */ -#define MEMP_NUM_TCP_PCB 30 - -/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP - connections. */ -#define MEMP_NUM_TCP_PCB_LISTEN 2 - -/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP - segments. */ -#define MEMP_NUM_TCP_SEG 10 - -/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active - timeouts. */ -#define MEMP_NUM_SYS_TIMEOUT 15 - -/* The following four are used only with the sequential API and can be - set to 0 if the application only will use the raw API. */ -/* MEMP_NUM_NETBUF: the number of struct netbufs. */ -#define MEMP_NUM_NETBUF 0 - -/* MEMP_NUM_NETCONN: the number of struct netconns. */ -#define MEMP_NUM_NETCONN 10 - -/* MEMP_NUM_TCPIP_MSG_*: the number of struct tcpip_msg, which is used - for sequential API communication and incoming packets. Used in - src/api/tcpip.c. */ -#define MEMP_NUM_TCPIP_MSG_API 4 -#define MEMP_NUM_TCPIP_MSG_INPKT 4 - -#define MEMP_NUM_ARP_QUEUE 5 - -/* ---------- Pbuf options ---------- */ -/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ -#define PBUF_POOL_SIZE 10 - -/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ -#define PBUF_POOL_BUFSIZE 375 - -/* PBUF_LINK_HLEN: the number of bytes that should be allocated for a - link level header. */ -#define PBUF_LINK_HLEN 16 - -/** SYS_LIGHTWEIGHT_PROT - * define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection - * for certain critical regions during buffer allocation, deallocation and memory - * allocation and deallocation. - */ -#define SYS_LIGHTWEIGHT_PROT (NO_SYS==0) - - -/* ---------- TCP options ---------- */ -#define LWIP_TCP 1 -#define TCP_TTL 255 - -/* Controls if TCP should queue segments that arrive out of - order. Define to 0 if your device is low on memory. */ -#define TCP_QUEUE_OOSEQ 1 - -/* TCP Maximum segment size. */ -#define TCP_MSS 1460 - -/* TCP sender buffer space (bytes). */ -#define TCP_SND_BUF ( TCP_MSS * 2 ) - -/* TCP sender buffer space (pbufs). This must be at least = 2 * - TCP_SND_BUF/TCP_MSS for things to work. */ -#define TCP_SND_QUEUELEN (4 * TCP_SND_BUF/TCP_MSS) - -/* TCP writable space (bytes). This must be less than or equal - to TCP_SND_BUF. It is the amount of space which must be - available in the tcp snd_buf for select to return writable */ -#define TCP_SNDLOWAT (TCP_SND_BUF/2) - -/* TCP receive window. */ -#define TCP_WND ( PBUF_POOL_SIZE * PBUF_POOL_BUFSIZE ) - -/* Maximum number of retransmissions of data segments. */ -#define TCP_MAXRTX 12 - -/* Maximum number of retransmissions of SYN segments. */ -#define TCP_SYNMAXRTX 4 - - -/* ---------- ARP options ---------- */ -#define LWIP_ARP 1 -#define ARP_TABLE_SIZE 10 -#define ARP_QUEUEING 1 - - -/* ---------- IP options ---------- */ -/* Define IP_FORWARD to 1 if you wish to have the ability to forward - IP packets across network interfaces. If you are going to run lwIP - on a device with only one network interface, define this to 0. */ -#define IP_FORWARD 0 - -/* IP reassembly and segmentation.These are orthogonal even - * if they both deal with IP fragments */ -#define IP_REASSEMBLY 0 -#define IP_REASS_MAX_PBUFS 10 -#define MEMP_NUM_REASSDATA 10 -#define IP_FRAG 0 - - -/* ---------- ICMP options ---------- */ -#define ICMP_TTL 255 - - -/* ---------- DHCP options ---------- */ -/* Define LWIP_DHCP to 1 if you want DHCP configuration of - interfaces. */ -#define LWIP_DHCP 0 - -/* 1 if you want to do an ARP check on the offered address - (recommended). */ -#define DHCP_DOES_ARP_CHECK (LWIP_DHCP) - - -/* ---------- AUTOIP options ------- */ -#define LWIP_AUTOIP 0 -#define LWIP_DHCP_AUTOIP_COOP (LWIP_DHCP && LWIP_AUTOIP) - - -/* ---------- UDP options ---------- */ -#define LWIP_UDP 1 -#define LWIP_UDPLITE 1 -#define UDP_TTL 255 - - -/* ---------- Statistics options ---------- */ - -#define LWIP_STATS 1 -#define LWIP_STATS_DISPLAY 0 - -#if LWIP_STATS - #define LINK_STATS 1 - #define IP_STATS 1 - #define ICMP_STATS 0 - #define IGMP_STATS 0 - #define IPFRAG_STATS 0 - #define UDP_STATS 1 - #define TCP_STATS 1 - #define MEM_STATS 1 - #define MEMP_STATS 1 - #define PBUF_STATS 1 - #define SYS_STATS 1 -#endif /* LWIP_STATS */ - - -/* ---------- PPP options ---------- */ - -#define PPP_SUPPORT 0 /* Set > 0 for PPP */ - -#if PPP_SUPPORT - - #define NUM_PPP 1 /* Max PPP sessions. */ - - /* Select modules to enable. Ideally these would be set in the makefile but - * we're limited by the command line length so you need to modify the settings - * in this file. - */ - #define PPPOE_SUPPORT 1 - #define PPPOS_SUPPORT 1 - #define PAP_SUPPORT 1 /* Set > 0 for PAP. */ - #define CHAP_SUPPORT 1 /* Set > 0 for CHAP. */ - #define MSCHAP_SUPPORT 0 /* Set > 0 for MSCHAP (NOT FUNCTIONAL!) */ - #define CBCP_SUPPORT 0 /* Set > 0 for CBCP (NOT FUNCTIONAL!) */ - #define CCP_SUPPORT 0 /* Set > 0 for CCP (NOT FUNCTIONAL!) */ - #define VJ_SUPPORT 1 /* Set > 0 for VJ header compression. */ - #define MD5_SUPPORT 1 /* Set > 0 for MD5 (see also CHAP) */ - -#endif /* PPP_SUPPORT */ - -#endif /* __LWIPOPTS_H__ */ |