Retrospectively check in source files modified in insight 6.8 release.arc-insight_6_8-branchpointinsight_6_8-branch

2 files changed, 53 insertions, 226 deletions

diff --git a/configure.ac b/configure.ac
index ab269c2dc3b..7c9df935744 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,6 +1,5 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-#   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation,
-#   Inc.
+#   2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -19,41 +18,11 @@
 ##############################################################################
 ### WARNING: this file contains embedded tabs.  Do not run untabify on this file.
 
-m4_include(config/acx.m4)
-m4_include(config/override.m4)
-m4_include(config/proginstall.m4)
+sinclude(config/acx.m4)
 
 AC_INIT(move-if-change)
 AC_PREREQ(2.59)
 
-progname=$0
-# if PWD already has a value, it is probably wrong.
-if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
-
-# Export original configure arguments for use by sub-configures.
-# Quote arguments with shell meta charatcers.
-TOPLEVEL_CONFIGURE_ARGUMENTS=
-set -- "$progname" "$@"
-for ac_arg
-do
-  case "$ac_arg" in
-  *" "*|*"	"*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*)
-    ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
-    # if the argument is of the form -foo=baz, quote the baz part only
-    ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;;
-  *) ;;
-  esac
-  # Add the quoted argument to the list.
-  TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg"
-done
-if test "$silent" = yes; then
-  TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent"
-fi
-# Remove the initial space we just introduced and, as these will be
-# expanded by make, quote '$'.
-TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
-AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
-
 # Find the build, host, and target systems.
 ACX_NONCANONICAL_BUILD
 ACX_NONCANONICAL_HOST
@@ -113,6 +82,34 @@ esac
 
 config_shell=${CONFIG_SHELL-/bin/sh}
 
+progname=$0
+# if PWD already has a value, it is probably wrong.
+if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
+
+# Export original configure arguments for use by sub-configures.
+# Quote arguments with shell meta charatcers.
+TOPLEVEL_CONFIGURE_ARGUMENTS=
+set -- "$progname" "$@"
+for ac_arg
+do
+  case "$ac_arg" in
+  *" "*|*"	"*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*)
+    ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
+    # if the argument is of the form -foo=baz, quote the baz part only
+    ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;;
+  *) ;;
+  esac
+  # Add the quoted argument to the list.
+  TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg"
+done
+if test "$silent" = yes; then
+  TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent"
+fi
+# Remove the initial space we just introduced and, as these will be
+# expanded by make, quote '$'.
+TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
+AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
+
 moveifchange=${srcdir}/move-if-change
 
 srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
@@ -158,15 +155,14 @@ build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fix
 
 # these libraries are used by various programs built for the host environment
 #
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr ppl cloog"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
 # know that we are building the simulator.
 # binutils, gas and ld appear in that order because it makes sense to run
 # "make check" in that particular order.
-# If --enable-gold is used, "gold" will replace "ld".
-host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
+host_tools="byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
 
 # libgcj represents the runtime libraries only used by gcj.
 libgcj="target-libffi \
@@ -242,7 +238,7 @@ use_gnu_ld=
 # Make sure we don't let GNU ld be added if we didn't want it.
 if test x$with_gnu_ld = xno ; then
   use_gnu_ld=no
-  noconfigdirs="$noconfigdirs ld gold"
+  noconfigdirs="$noconfigdirs ld"
 fi
 
 use_gnu_as=
@@ -293,38 +289,6 @@ case ${with_newlib} in
   yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
 esac
 
-# Handle --enable-gold.
-
-AC_ARG_ENABLE(gold,
-[  --enable-gold           use gold instead of ld],
-ENABLE_GOLD=$enableval,
-ENABLE_GOLD=no)
-if test "${ENABLE_GOLD}" = "yes"; then
-  # Check for ELF target.
-  is_elf=no
-  case "${target}" in
-    *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
-    | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
-    | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2*)
-      case "${target}" in
-        *-*-linux*aout* | *-*-linux*oldld*)
-          ;;
-        *)
-          is_elf=yes
-          ;;
-      esac
-  esac
-
-  if test "$is_elf" = "yes"; then
-    # Check for target supported by gold.
-    case "${target}" in
-      i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-*)
-        configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
-        ;;
-    esac
-  fi
-fi
-
 # Configure extra directories which are host specific
 
 case "${host}" in
@@ -446,12 +410,8 @@ case "${target}" in
   *-*-chorusos)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
-  powerpc-*-darwin* | x86_64-*-darwin[[912]]*)
-    noconfigdirs="$noconfigdirs ld gas gdb gprof"
-    noconfigdirs="$noconfigdirs sim target-rda"
-    ;;
-  i[[3456789]]86-*-darwin*)
-    noconfigdirs="$noconfigdirs ld gas gprof"
+  powerpc-*-darwin* | i[[3456789]]86-*-darwin* | x86_64-*-darwin9*)
+    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
     ;;
   *-*-darwin*)
@@ -568,6 +528,7 @@ case "${target}" in
     ;;
   arm*-*-linux-gnueabi)
     noconfigdirs="$noconfigdirs target-qthreads"
+    noconfigdirs="$noconfigdirs target-libobjc"
     case ${with_newlib} in
       no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     esac
@@ -593,7 +554,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
     ;;
   avr-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
+    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
   bfin-*-*)
     noconfigdirs="$noconfigdirs gdb"
@@ -607,9 +568,6 @@ case "${target}" in
   c54x*-*-* | tic54x-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
     ;;
-  cr16-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb"
-    ;;
   cris-*-* | crisv32-*-*)
     unsupported_languages="$unsupported_languages java"
     case "${target}" in
@@ -688,10 +646,6 @@ case "${target}" in
     # No gdb or ld support yet.
     noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
     ;;
-  ia64*-*-*vms*)
-    # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
-    ;;
   i370-*-opened*)
     ;;
   i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
@@ -899,6 +853,9 @@ case "${target}" in
     ;;
   sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
     ;;
+  spu-*-*)
+    skipdirs="target-libssp"
+    ;;
   v810-*-*)
     noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
     ;;
@@ -1051,10 +1008,12 @@ case "${host}" in
     host_makefile_frag="config/mh-djgpp"
     ;;
   *-cygwin*)
-    ACX_CHECK_CYGWIN_CAT_WORKS
     host_makefile_frag="config/mh-cygwin"
     ;;
-  *-mingw*)
+  *-mingw32*)
+    host_makefile_frag="config/mh-mingw"
+    ;;
+  *-mingw64*)
     host_makefile_frag="config/mh-mingw"
     ;;
   *-interix*)
@@ -1072,18 +1031,10 @@ case "${host}" in
     # without overflowing the jump tables (-J says to use a 32 bit table)
     tentative_cc="cc -J"
     ;;
-  hppa*-hp-hpux10*)
-    tentative_cc="cc -Wp,-H256000"
-    host_makefile_frag="config/mh-pa-hpux10"
-    ;;
-  hppa*-hp-hpux* | hppa*-*-hiux*)
+  *-hp-hpux*)
     tentative_cc="cc -Wp,-H256000"
-    host_makefile_frag="config/mh-pa"
     ;;
-  hppa*-*)	
-    host_makefile_frag="config/mh-pa"
-    ;;
-  *-hp-hpux* | *-*-hiux*)
+  *-*-hiux*)
     tentative_cc="cc -Wp,-H256000"
     ;;
   rs6000-*-lynxos*)
@@ -1272,11 +1223,11 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
   if test x"$have_gmp" = xyes; then
     saved_LIBS="$LIBS"
     LIBS="$LIBS $gmplibs"
-    dnl MPFR 2.3.0 is acceptable, but MPFR 2.3.2 is better.
+    dnl MPFR 2.2.1 is acceptable, but MPFR 2.3.0 is better.
     AC_MSG_CHECKING([for correct version of mpfr.h])
     AC_TRY_LINK([#include <gmp.h>
     #include <mpfr.h>],[
-    #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,0)
+    #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
     choke me
     #endif
     mpfr_t n;
@@ -1289,7 +1240,7 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
     mpfr_subnormalize (x, t, GMP_RNDN);
     ], [AC_TRY_LINK([#include <gmp.h>
     #include <mpfr.h>],[
-    #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,2)
+    #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,0)
     choke me
     #endif
     mpfr_t n; mpfr_init(n);
@@ -1300,7 +1251,7 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
   CFLAGS="$saved_CFLAGS"
 
   if test x$have_gmp != xyes; then
-    AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.3.2+.
+    AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
 Try the --with-gmp and/or --with-mpfr options to specify their locations.
 Copies of these libraries' source code can be found at their respective
 hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
@@ -1315,115 +1266,6 @@ fi
 AC_SUBST(gmplibs)
 AC_SUBST(gmpinc)
 
-
-# Check for PPL
-ppl_major_version=0
-ppl_minor_version=10
-ppllibs=" -lppl_c -lppl -lgmpxx "
-pplinc=
-
-AC_ARG_WITH(ppl, [  --with-ppl=PATH         Specify prefix directory for the installed PPL package
-                          Equivalent to --with-ppl-include=PATH/include
-                          plus --with-ppl-lib=PATH/lib])
-AC_ARG_WITH(ppl_include, [  --with-ppl-include=PATH Specify directory for installed PPL include files])
-AC_ARG_WITH(ppl_lib, [  --with-ppl-lib=PATH     Specify the directory for the installed PPL library])
-
-if test "x$with_ppl" != x; then
-  ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
-  pplinc="-I$with_ppl/include $pplinc"
-  LIBS="$ppllibs $LIBS"
-fi
-if test "x$with_ppl_include" != x; then
-  pplinc="-I$with_ppl_include $pplinc"
-fi
-if test "x$with_ppl_lib" != x; then
-  ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
-  LIBS="$ppllibs $LIBS"
-fi
-if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
-  ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/.libs -L$$r/$(HOST_SUBDIR)/ppl/_libs -lppl_c -lppl -lgmpxx '
-  pplinc='-I$$r/$(HOST_SUBDIR)/ppl/include -I$$s/ppl/include '
-  LIBS="$ppllibs $LIBS"
-fi
-
-AC_ARG_ENABLE(ppl-version-check,
-[  --disable-ppl-version-check    disable check for PPL version],
-ENABLE_PPL_CHECK=$enableval,
-ENABLE_PPL_CHECK=yes)
-
-if test "${ENABLE_PPL_CHECK}" = "yes"; then
-  saved_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS $pplinc $gmpinc"
-  AC_MSG_CHECKING([for version $ppl_major_version.$ppl_minor_version of PPL])
-  AC_TRY_COMPILE([#include "ppl_c.h"],[
-  #if PPL_VERSION_MAJOR != $ppl_major_version || PPL_VERSION_MINOR != $ppl_minor_version
-  choke me
-  #endif
-  ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ])
-  CFLAGS="$saved_CFLAGS"
-fi
-
-# Flags needed for PPL
-AC_SUBST(ppllibs)
-AC_SUBST(pplinc)
-
-
-# Check for CLOOG
-clooglibs=" -lcloog "
-clooginc=" -DCLOOG_PPL_BACKEND "
-
-AC_ARG_WITH(cloog, [  --with-cloog=PATH       Specify prefix directory for the installed CLooG-PPL package
-                          Equivalent to --with-cloog-include=PATH/include
-                          plus --with-cloog-lib=PATH/lib])
-AC_ARG_WITH(cloog_include, [  --with-cloog-include=PATH Specify directory for installed CLooG include files])
-AC_ARG_WITH(cloog_lib, [  --with-cloog-lib=PATH   Specify the directory for the installed CLooG library])
-AC_ARG_WITH(cloog-polylib, [  --with-cloog-polylib=PATH Specify prefix directory for the installed CLooG-PolyLib package])
-
-if test "x$with_cloog" != x; then
-  clooglibs="-L$with_cloog/lib -lcloog"
-  clooginc="-I$with_cloog/include -DCLOOG_PPL_BACKEND "
-  LIBS="$clooglibs $LIBS"
-fi
-if test "x$with_cloog_polylib" != x; then
-  clooglibs="-L$with_cloog/lib -lcloog"
-  clooginc="-I$with_cloog/include "
-  LIBS="$clooglibs $LIBS"
-fi
-if test "x$with_cloog_include" != x; then
-  clooginc="-I$with_cloog_include -DCLOOG_PPL_BACKEND "
-fi
-if test "x$with_cloog_lib" != x; then
-  clooglibs="-L$with_cloog_lib -lcloog"
-  LIBS="$clooglibs $LIBS"
-fi
-if test "x$with_cloog$with_cloog_include$with_cloog_lib" = x && test -d ${srcdir}/cloog; then
-  clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/.libs -L$$r/$(HOST_SUBDIR)/cloog/_libs -lcloog '
-  clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include -DCLOOG_PPL_BACKEND '
-  LIBS="$clooglibs $LIBS"
-fi
-
-AC_ARG_ENABLE(cloog-version-check,
-[  --disable-cloog-version-check  disable check for CLooG version],
-ENABLE_CLOOG_CHECK=$enableval,
-ENABLE_CLOOG_CHECK=yes)
-
-if test "${ENABLE_CLOOG_CHECK}" = "yes"; then
-  saved_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS $clooginc $gmpinc $pplinc"
-  AC_MSG_CHECKING([for correct version of CLooG])
-  AC_TRY_COMPILE([#include "cloog/cloog.h"],[
-  #if CLOOG_VERSION_MAJOR != 0 || CLOOG_VERSION_MINOR != 15
-  choke me
-  #endif
-  ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); clooglibs= ; clooginc= ])
-  CFLAGS="$saved_CFLAGS"
-fi
-
-# Flags needed for CLOOG
-AC_SUBST(clooglibs)
-AC_SUBST(clooginc)
-
-
 # By default, C is the only stage 1 language.
 stage1_languages=,c,
 
@@ -1908,7 +1750,7 @@ if test x${use_gnu_as} = x &&
 fi
 
 if test x${use_gnu_ld} = x &&
-   echo " ${configdirs} " | egrep " (go)?ld " > /dev/null 2>&1 ; then
+   echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
   with_gnu_ld=yes
   extra_host_args="$extra_host_args --with-gnu-ld"
 fi
@@ -2018,9 +1860,6 @@ case "${target}" in
   mipsisa*-*-elfoabi*)
     target_makefile_frag="config/mt-mips-elfoabi"
     ;;
-  mips*-*-*linux* | mips*-*-gnu*)
-    target_makefile_frag="config/mt-mips-gnu"
-    ;;
   *-*-netware*)
     target_makefile_frag="config/mt-netware"
     ;;
@@ -2164,23 +2003,12 @@ case "${host}" in
   ;;
 esac
 
-# Decide which environment variable is used to find dynamic libraries.
 case "${host}" in
   *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
   *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
-  *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
   *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
 esac
 
-# On systems where the dynamic library environment variable is PATH,
-# gcc/ will put dynamic libraries into a subdirectory to avoid adding
-# built executables to PATH.
-if test "$RPATH_ENVVAR" = PATH; then
-  GCC_SHLIB_SUBDIR=/shlib
-else
-  GCC_SHLIB_SUBDIR=
-fi
-
 # Record target_configdirs and the configure arguments for target and
 # build configuration in Makefile.
 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
@@ -2638,7 +2466,6 @@ AC_SUBST_FILE(ospace_frag)
 
 # Miscellanea: directories, flags, etc.
 AC_SUBST(RPATH_ENVVAR)
-AC_SUBST(GCC_SHLIB_SUBDIR)
 AC_SUBST(tooldir)
 AC_SUBST(build_tooldir)
 AC_SUBST(CONFIGURE_GDB_TK)
diff --git a/djunpack.bat b/djunpack.bat
index f09f5ed3251..5009f9f6957 100755
--- a/djunpack.bat
+++ b/djunpack.bat
@@ -17,8 +17,8 @@ Rem
 Rem The following 2 lines need to be changed with each new GDB release, to

 Rem be identical to the name of the top-level directory where the GDB

 Rem distribution unpacks itself.

-set GDBVER=gdb-5.0

-if "%GDBVER%"=="gdb-5.0" GoTo EnvOk

+set GDBVER=insight-6.8

+if "%GDBVER%"=="insight-6.8" GoTo EnvOk

 Rem If their environment space is too small, re-exec with a larger one

 command.com /e:4096 /c %0 %1

 GoTo End