gdb/gdbserver/

	* gdb.trace/report.exp: Move some code to ...
	(use_collected_data): New.
	(top level): Call use_collected_data once on the live target.
	Save at file of the current trace session, load it with target
	tfile, and call use_collected_data again.

1 files changed, 173 insertions, 140 deletions

diff --git a/gdb/testsuite/gdb.trace/report.exp b/gdb/testsuite/gdb.trace/report.exp
index e8aa597844c..b32bca1fb49 100644
--- a/gdb/testsuite/gdb.trace/report.exp
+++ b/gdb/testsuite/gdb.trace/report.exp
@@ -181,210 +181,243 @@ gdb_test "continue" \
 
 gdb_test "tstop" ".*" ""
 
-#
-# 9.1 test the tdump command
-#
+gdb_tfind_test "9.1: init: make sure not debugging any trace frame" \
+    "none" "-1"
 
-set timeout 60
+# 9.3 help tdump
 
-gdb_tfind_test "9.1: init: make sure not debugging any trace frame" "none" "-1"
+gdb_test "help tdump" "Print everything collected at the current.*" \
+	"9.3: help tdump"
 
-gdb_tfind_test "9.1: find frame for TP $tdp1" "tracepoint $tdp1" \
+# Check the collected trace data from different sources, such as live
+# inferior and tfile.
+
+proc use_collected_data { data_source } { with_test_prefix "${data_source}" {
+    global tdp1 tdp2 tdp3 tdp4 tdp5 tdp6
+    global testline1 testline2 testline3 testline4 testline5 testline6
+    global pcreg fpreg spreg
+    global srcfile srcdir subdir
+    global arg1 arg3
+    global decimal hex gdb_prompt
+    #
+    # 9.1 test the tdump command
+    #
+
+    set timeout 60
+
+    gdb_tfind_test "9.1: find frame for TP $tdp1" "tracepoint $tdp1" \
 	"\$tracepoint" "$tdp1"
 
-# Nothing was collected at tdp1, so this tdump should be empty.
-gdb_test "tdump" \
+    # Nothing was collected at tdp1, so this tdump should be empty.
+    gdb_test "tdump" \
 	"Data collected at tracepoint $tdp1, trace frame $decimal:" \
 	"9.1: tdump, nothing collected"
 
-gdb_tfind_test "9.1: find frame for TP $tdp2" "tracepoint $tdp2" \
+    gdb_tfind_test "9.1: find frame for TP $tdp2" "tracepoint $tdp2" \
 	"\$tracepoint" "$tdp2"
 
-# regs were collected at tdp2.
-# How to match for the output of "info registers" on an unknown architecture?
-# For now, assume that most architectures have a register called "pc".
+    # regs were collected at tdp2.
+    # How to match for the output of "info registers" on an unknown architecture?
+    # For now, assume that most architectures have a register called "pc".
 
-gdb_test "tdump" \
-       "\[\r\n\]$pcreg .*" \
-       "9.1: tdump, regs collected"
+    gdb_test "tdump" \
+	"\[\r\n\]$pcreg .*" \
+	"9.1: tdump, regs collected"
 
-gdb_tfind_test "9.1: find frame for TP $tdp3" "tracepoint $tdp3" \
+    gdb_tfind_test "9.1: find frame for TP $tdp3" "tracepoint $tdp3" \
 	"\$tracepoint" "$tdp3"
 
-# args were collected at tdp3
-gdb_test "tdump" \
+    # args were collected at tdp3
+    gdb_test "tdump" \
 	"depth = 3.*q1 = 2.*q2 = 2.*q3 = 3.*q4 = 4.*q5 = 5.*q6 = 6" \
 	"9.1: tdump, args collected"
 
-gdb_tfind_test "9.1: find frame for TP $tdp4" "tracepoint $tdp4" \
+    gdb_tfind_test "9.1: find frame for TP $tdp4" "tracepoint $tdp4" \
 	"\$tracepoint" "$tdp4"
 
-# locals were collected at tdp4
-gdb_test "tdump" \
+    # locals were collected at tdp4
+    gdb_test "tdump" \
 	"q = 1" \
 	"9.1: tdump, locals collected"
 
-gdb_tfind_test "9.1: find frame for TP $tdp5" "tracepoint $tdp5" \
+    gdb_tfind_test "9.1: find frame for TP $tdp5" "tracepoint $tdp5" \
 	"\$tracepoint" "$tdp5"
 
-# stack was collected at tdp5, plus the frame pointer
-gdb_test "tdump" \
-       ".$fpreg = .*$spreg @ 64 = .*" \
-       "9.1: tdump, memrange collected"
+    # stack was collected at tdp5, plus the frame pointer
+    gdb_test "tdump" \
+	".$fpreg = .*$spreg @ 64 = .*" \
+	"9.1: tdump, memrange collected"
 
-gdb_tfind_test "9.1: find frame for TP $tdp6" "tracepoint $tdp6" \
+    gdb_tfind_test "9.1: find frame for TP $tdp6" "tracepoint $tdp6" \
 	"\$tracepoint" "$tdp6"
 
-# globals were collected at tdp6
-gdb_test "tdump" \
+    # globals were collected at tdp6
+    gdb_test "tdump" \
 	"gdb_char_test = 1.*gdb_short_test = 2.*gdb_long_test = 3" \
 	"9.1: tdump, global variables collected"
 
-# 9.2 test tdump with arguments
-#     [no go, tdump doesn't have any arguments]
+    # 9.2 test tdump with arguments
+    #     [no go, tdump doesn't have any arguments]
 
-# 9.3 help tdump
+    set linecount1 0
+    set linecount2 0
+    set linecount3 0
+    set linecount4 0
+    set linecount5 0
+    set linecount6 0
 
-gdb_test "help tdump" "Print everything collected at the current.*" \
-	"9.3: help tdump"
-
-set linecount1 0
-set linecount2 0
-set linecount3 0
-set linecount4 0
-set linecount5 0
-set linecount6 0
-
-gdb_tfind_test "11.x, 12.1: find start frame" "start" "0"
+    gdb_tfind_test "11.x, 12.1: find start frame" "start" "0"
 
-#
-# 11.x test built-in trace variables $trace_frame, $trace_line etc.
-#
+    #
+    # 11.x test built-in trace variables $trace_frame, $trace_line etc.
+    #
 
-gdb_test "printf \"x %d x\\n\", \$trace_frame" "x 0 x" \
+    gdb_test "printf \"x %d x\\n\", \$trace_frame" "x 0 x" \
 	"11.1: test \$trace_frame"
 
-gdb_test "printf \"x %d x\\n\", \$tracepoint" "x $tdp1 x" \
+    gdb_test "printf \"x %d x\\n\", \$tracepoint" "x $tdp1 x" \
 	"11.2: test \$tracepoint"
 
-gdb_test "printf \"x %d x\\n\", \$trace_line" "x $testline1 x" \
+    gdb_test "printf \"x %d x\\n\", \$trace_line" "x $testline1 x" \
 	"11.3: test \$trace_line"
 
-gdb_test_multiple "print \$trace_file" "11.4: test \$trace_file" {
-    -re "\\$\[0-9\]+ = \"$srcfile\"\[\r\n\]+$gdb_prompt $" {
-	pass "11.4: test \$trace_file"
-    }
-    -re "\\$\[0-9\]+ = \"$srcdir/$subdir/$srcfile\"\[\r\n\]+$gdb_prompt $" {
-	pass "11.4: test \$trace_file"
+    gdb_test_multiple "print \$trace_file" "11.4: test \$trace_file" {
+	-re "\\$\[0-9\]+ = \"$srcfile\"\[\r\n\]+$gdb_prompt $" {
+	    pass "11.4: test \$trace_file"
+	}
+	-re "\\$\[0-9\]+ = \"$srcdir/$subdir/$srcfile\"\[\r\n\]+$gdb_prompt $" {
+	    pass "11.4: test \$trace_file"
+	}
     }
-}
 
-#gdb_test "print \$trace_file" "\"$srcdir/$subdir/$srcfile\"" \
-#	"11.4: test \$trace_file"
+    #gdb_test "print \$trace_file" "\"$srcdir/$subdir/$srcfile\"" \
+	#	"11.4: test \$trace_file"
 
-#
-# 12.x test report generation using arbitrary GDB commands, loops etc.
-#
+    #
+    # 12.x test report generation using arbitrary GDB commands, loops etc.
+    #
 
-gdb_test_multiple "while \$trace_frame != -1\n  output \$trace_file\n  printf \", line \%d \(tracepoint #\%d\)\\n\", \$trace_line, \$tracepoint\n  tfind\n  end" "12.1: trace report #1" {
-    -re ">  end\r\n" {
-	exp_continue
-    }
-    -re "^Found trace frame \[0-9\]+, tracepoint \[0-9\]+\r\n" {
-	exp_continue
-    }
-    -re "^\[^\r\n\]* line $testline1 .tracepoint .$tdp1\\)\r\n" {
-	set linecount1 [expr $linecount1 + 1]
-	exp_continue
-    }
-    -re "^\[^\r\n\]* line $testline2 .tracepoint .$tdp2\\)\r\n" {
-	set linecount2 [expr $linecount2 + 1]
-	exp_continue
-    }
-    -re "^\[^\r\n\]* line $testline3 .tracepoint .$tdp3\\)\r\n" {
-	set linecount3 [expr $linecount3 + 1]
-	exp_continue
-    }
-    -re "^\[^\r\n\]* line $testline4 .tracepoint .$tdp4\\)\r\n" {
-	set linecount4 [expr $linecount4 + 1]
-	exp_continue
-    }
-    -re "^\[^\r\n\]* line $testline5 .tracepoint .$tdp5\\)\r\n" {
-	set linecount5 [expr $linecount5 + 1]
-	exp_continue
-    }
-    -re "^\[^\r\n\]* line $testline6 .tracepoint .$tdp6\\)\r\n" {
-	set linecount6 [expr $linecount6 + 1]
-	exp_continue
-    }
-    -re "^No trace frame found\r\n$gdb_prompt $" {
-	if { ($linecount1 < 4) || ($linecount2 < 4) || ($linecount3 < 4) || ($linecount4 < 4) || ($linecount5 < 4) || ($linecount6 < 4) } {
-	    fail "12.1: trace report #1"
-	} else {
-	    pass "12.1: trace report #1"
+    gdb_test_multiple "while \$trace_frame != -1\n  output \$trace_file\n  printf \", line \%d \(tracepoint #\%d\)\\n\", \$trace_line, \$tracepoint\n  tfind\n  end" "12.1: trace report #1" {
+	-re ">  end\r\n" {
+	    exp_continue
+	}
+	-re "^Found trace frame \[0-9\]+, tracepoint \[0-9\]+\r\n" {
+	    exp_continue
+	}
+	-re "^\[^\r\n\]* line $testline1 .tracepoint .$tdp1\\)\r\n" {
+	    set linecount1 [expr $linecount1 + 1]
+	    exp_continue
+	}
+	-re "^\[^\r\n\]* line $testline2 .tracepoint .$tdp2\\)\r\n" {
+	    set linecount2 [expr $linecount2 + 1]
+	    exp_continue
+	}
+	-re "^\[^\r\n\]* line $testline3 .tracepoint .$tdp3\\)\r\n" {
+	    set linecount3 [expr $linecount3 + 1]
+	    exp_continue
+	}
+	-re "^\[^\r\n\]* line $testline4 .tracepoint .$tdp4\\)\r\n" {
+	    set linecount4 [expr $linecount4 + 1]
+	    exp_continue
+	}
+	-re "^\[^\r\n\]* line $testline5 .tracepoint .$tdp5\\)\r\n" {
+	    set linecount5 [expr $linecount5 + 1]
+	    exp_continue
+	}
+	-re "^\[^\r\n\]* line $testline6 .tracepoint .$tdp6\\)\r\n" {
+	    set linecount6 [expr $linecount6 + 1]
+	    exp_continue
+	}
+	-re "^No trace frame found\r\n$gdb_prompt $" {
+	    if { ($linecount1 < 4) || ($linecount2 < 4) || ($linecount3 < 4) || ($linecount4 < 4) || ($linecount5 < 4) || ($linecount6 < 4) } {
+		fail "12.1: trace report #1"
+	    } else {
+		pass "12.1: trace report #1"
+	    }
 	}
     }
-}
 
-gdb_tfind_test "12.2: tfind end, selects no frame" "end" "-1"
-gdb_tfind_test "12.2: find first TDP #2 frame" "tracepoint $tdp2" \
+    gdb_tfind_test "12.2: tfind end, selects no frame" "end" "-1"
+    gdb_tfind_test "12.2: find first TDP #2 frame" "tracepoint $tdp2" \
 	"\$tracepoint" "$tdp2"
 
-set linecount2 0
+    set linecount2 0
 
-gdb_test_multiple "while \$trace_frame != -1\n printf \"tracepoint #\%d, FP 0x\%08x, SP 0x\%08x, PC 0x%08x\\n\", \$tracepoint, \$fp, \$sp, \$pc\n tfind tracepoint\n end" "12.2: trace report #2" {
-    -re "tracepoint #$tdp2, FP $hex, SP $hex, PC $hex" {
-	set linecount2 [expr $linecount2 + 1]
-	exp_continue
-    }
-    -re ".*$gdb_prompt $" {
-	if { ($linecount2 < 4) } {
-	    fail "12.2: trace report #2"
-	} else {
-	    pass "12.2: trace report #2"
+    gdb_test_multiple "while \$trace_frame != -1\n printf \"tracepoint #\%d, FP 0x\%08x, SP 0x\%08x, PC 0x%08x\\n\", \$tracepoint, \$fp, \$sp, \$pc\n tfind tracepoint\n end" "12.2: trace report #2" {
+	-re "tracepoint #$tdp2, FP $hex, SP $hex, PC $hex" {
+	    set linecount2 [expr $linecount2 + 1]
+	    exp_continue
+	}
+	-re ".*$gdb_prompt $" {
+	    if { ($linecount2 < 4) } {
+		fail "12.2: trace report #2"
+	    } else {
+		pass "12.2: trace report #2"
+	    }
 	}
     }
-}
 
-gdb_tfind_test "12.3: tfind end, selects no frame" "end" "-1"
-gdb_tfind_test "12.3: find first TDP #3 frame" "tracepoint $tdp3" \
+    gdb_tfind_test "12.3: tfind end, selects no frame" "end" "-1"
+    gdb_tfind_test "12.3: find first TDP #3 frame" "tracepoint $tdp3" \
 	"\$tracepoint" "$tdp3"
 
-set linecount3 0
+    set linecount3 0
 
-gdb_test_multiple "while \$trace_frame != -1\n printf \"TDP #\%d, frame \%d: depth = \%d, q1 = \%d\\n\", \$tracepoint, \$trace_frame, depth, q1\n tfind tracepoint\n end" "12.3: trace report #3" {
-    -re "TDP #$tdp3, frame $decimal: depth = $decimal, q1 = $decimal" {
-	set linecount3 [expr $linecount3 + 1]
-	exp_continue
-    }
-    -re ".*$gdb_prompt $" {
-	if { ($linecount3 < 4) } {
-	    fail "12.3: trace report #3"
-	} else {
-	    pass "12.3: trace report #3"
+    gdb_test_multiple "while \$trace_frame != -1\n printf \"TDP #\%d, frame \%d: depth = \%d, q1 = \%d\\n\", \$tracepoint, \$trace_frame, depth, q1\n tfind tracepoint\n end" "12.3: trace report #3" {
+	-re "TDP #$tdp3, frame $decimal: depth = $decimal, q1 = $decimal" {
+	    set linecount3 [expr $linecount3 + 1]
+	    exp_continue
+	}
+	-re ".*$gdb_prompt $" {
+	    if { ($linecount3 < 4) } {
+		fail "12.3: trace report #3"
+	    } else {
+		pass "12.3: trace report #3"
+	    }
 	}
     }
-}
 
-gdb_tfind_test "12.4: tfind end, selects no frame" "end" "-1"
-gdb_tfind_test "12.4: find first TDP #6 frame" "tracepoint $tdp6" \
+    gdb_tfind_test "12.4: tfind end, selects no frame" "end" "-1"
+    gdb_tfind_test "12.4: find first TDP #6 frame" "tracepoint $tdp6" \
 	"\$tracepoint" "$tdp6"
 
-set linecount6 0
+    set linecount6 0
 
-gdb_test_multiple "while \$trace_frame != -1\n printf \"TDP #\%d, frame %d: char_test = \%d, long_test = \%d\\n\", \$tracepoint, \$trace_frame, gdb_char_test, gdb_long_test\n tfind tracepoint\n end" "12.4: trace report #4" {
-    -re "TDP #$tdp6, frame $decimal: char_test = $arg1, long_test = $arg3" {
-	set linecount6 [expr $linecount6 + 1]
-	exp_continue
-    }
-    -re ".*$gdb_prompt $" {
-	if { ($linecount6 < 4) } {
-	    fail "12.4: trace report #4"
-	} else {
-	    pass "12.4: trace report #4"
+    gdb_test_multiple "while \$trace_frame != -1\n printf \"TDP #\%d, frame %d: char_test = \%d, long_test = \%d\\n\", \$tracepoint, \$trace_frame, gdb_char_test, gdb_long_test\n tfind tracepoint\n end" "12.4: trace report #4" {
+	-re "TDP #$tdp6, frame $decimal: char_test = $arg1, long_test = $arg3" {
+	    set linecount6 [expr $linecount6 + 1]
+	    exp_continue
+	}
+	-re ".*$gdb_prompt $" {
+	    if { ($linecount6 < 4) } {
+		fail "12.4: trace report #4"
+	    } else {
+		pass "12.4: trace report #4"
+	    }
 	}
     }
 }
+}
+
+use_collected_data "live"
 
 # Finished!
-gdb_tfind_test "finished: make sure not debugging any trace frame" "none" "-1"
+gdb_tfind_test "finished: make sure not debugging any trace frame" \
+    "none" "-1"
+
+# Save trace frames to tfile.
+gdb_test "tsave report.tf" "Trace data saved to file 'report.tf'.*"
+
+# Change target to tfile.
+set test "change to tfile target"
+gdb_test_multiple "target tfile report.tf" "$test" {
+    -re "A program is being debugged already.  Kill it. .y or n. " {
+	send_gdb "y\n"
+	exp_continue
+    }
+    -re "$gdb_prompt $" {
+	pass "$test"
+    }
+}
+# Test the collected trace frames from tfile.
+use_collected_data "tfile"