merge from gcc

7 files changed, 752 insertions, 1479 deletions

diff --git a/libiberty/ChangeLog b/libiberty/ChangeLog
index 00320bbf253..660bb968899 100644
--- a/libiberty/ChangeLog
+++ b/libiberty/ChangeLog
@@ -1,3 +1,12 @@
+2004-12-27  H.J. Lu  <hongjiu.lu@intel.com>
+
+	* Makefile.in: Undo to 2004-12-17.
+	* aclocal.m4: Likewise.
+	* config.table: Likewise.
+	* configure.ac: Likewise.
+	* maint-tool: Likewise.
+	* configure: Likewise.
+
 2004-12-19  H.J. Lu  <hongjiu.lu@intel.com>
 
 	PR bootstrap/19072
diff --git a/libiberty/Makefile.in b/libiberty/Makefile.in
index 0194e5bbd05..ffa4ba51d67 100644
--- a/libiberty/Makefile.in
+++ b/libiberty/Makefile.in
@@ -29,10 +29,6 @@
 libiberty_topdir = @libiberty_topdir@
 srcdir = @srcdir@
 
-top_builddir = .
-
-enable_shared = @enable_shared@
-
 prefix = @prefix@
 
 exec_prefix = @exec_prefix@
@@ -56,6 +52,9 @@ INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 mkinstalldirs = $(SHELL) $(libiberty_topdir)/mkinstalldirs
 
+# Some compilers can't handle cc -c blah.c -o foo/blah.o.
+OUTPUT_OPTION = @OUTPUT_OPTION@
+
 AR = @AR@
 AR_FLAGS = rc
 
@@ -65,26 +64,19 @@ LIBCFLAGS = $(CFLAGS)
 RANLIB = @RANLIB@
 MAKEINFO = @MAKEINFO@
 PERL = @PERL@
-LIBTOOL = @LIBTOOL@
 
 PICFLAG =
 
 MAKEOVERRIDES =
 
 TARGETLIB = ./libiberty.a
-LTTARGETLIB = ./libiberty.la
-PREFIXTARGETLIB= ./libiberty
 TESTLIB = ./testlib.a
-LTTESTLIB = ./testlib.la
-PREFIXTESTLIB = ./testlib
 
 LIBOBJS = @LIBOBJS@
-LTLIBOBJS = @LTLIBOBJS@
 
 # A configuration can specify extra .o files that should be included,
 # even if they are in libc. (Perhaps the libc version is buggy.)
 EXTRA_OFILES = 
-EXTRA_LTOFILES = 
 
 # Flags to pass to a recursive make.
 FLAGS_TO_PASS = \
@@ -95,7 +87,6 @@ FLAGS_TO_PASS = \
 	"DESTDIR=$(DESTDIR)" \
 	"LIBCFLAGS=$(LIBCFLAGS)" \
 	"EXTRA_OFILES=$(EXTRA_OFILES)" \
-	"EXTRA_LTOFILES=$(EXTRA_LTOFILES)" \
 	"HDEFINES=$(HDEFINES)" \
 	"INSTALL=$(INSTALL)" \
 	"INSTALL_DATA=$(INSTALL_DATA)" \
@@ -114,7 +105,7 @@ FLAGS_TO_PASS = \
 SUBDIRS = testsuite
 
 # FIXME: add @BUILD_INFO@ once we're sure it works for everyone.
-all: $(TARGETLIB) needed-list required-list all-subdir
+all: stamp-picdir $(TARGETLIB) needed-list required-list all-subdir
 	@: $(MAKE) ; exec $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all
 
 .PHONY: check installcheck
@@ -126,21 +117,15 @@ installcheck: installcheck-subdir
 INCDIR=$(srcdir)/$(MULTISRCTOP)../include
 
 COMPILE.c = $(CC) -c @DEFS@ $(LIBCFLAGS) -I. -I$(INCDIR) $(HDEFINES) @ac_libiberty_warn_cflags@
-LTCOMPILE = $(LIBTOOL) --mode=compile $(COMPILE.c)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(CFLAGS)
 
 # Just to make sure we don't use a built-in rule with VPATH
 .c.o:
 	false
 
-.c.lo:
-	false
-
 # NOTE: If you add new files to the library, add them to this list
-# (alphabetical), and add them to REQUIRED_OFILES/REQUIRED_LTOFILES, or
-# CONFIGURED_OFILES/CONFIGURED_LTOFILES and funcs in configure.ac.
-# Also run "make maint-deps" to build the new rules.
+# (alphabetical), and add them to REQUIRED_OFILES, or
+# CONFIGURED_OFILES and funcs in configure.ac.  Also run "make maint-deps"
+# to build the new rules.
 CFILES = alloca.c argv.c asprintf.c atexit.c				\
 	basename.c bcmp.c bcopy.c bsearch.c bzero.c			\
 	calloc.c choose-temp.c clock.c concat.c cp-demangle.c		\
@@ -188,22 +173,6 @@ REQUIRED_OFILES = ./regex.o ./cplus-dem.o ./cp-demangle.o ./md5.o	\
 	./ternary.o							\
 	./xatexit.o ./xexit.o ./xmalloc.o ./xmemdup.o ./xstrdup.o	\
 	 ./xstrerror.o
-REQUIRED_LTOFILES = ./regex.lo ./cplus-dem.lo ./cp-demangle.lo ./md5.lo	\
-	./alloca.lo ./argv.lo						\
-	./choose-temp.lo ./concat.lo ./cp-demint.lo			\
-	./dyn-string.lo							\
-	./fdmatch.lo ./fibheap.lo ./floatformat.lo ./fnmatch.lo		\
-	./getopt.lo ./getopt1.lo ./getpwd.lo ./getruntime.lo		\
-	./hashtab.lo ./hex.lo						\
-	./lbasename.lo ./lrealpath.lo					\
-	./make-relative-prefix.lo ./make-temp-file.lo			\
-	./objalloc.lo ./obstack.lo					\
-	./partition.lo ./physmem.lo @ltpexecute@				\
-	./safe-ctype.lo ./sort.lo ./spaces.lo ./splay-tree.lo ./strerror.lo	\
-	 ./strsignal.lo							\
-	./ternary.lo							\
-	./xatexit.lo ./xexit.lo ./xmalloc.lo ./xmemdup.lo ./xstrdup.lo	\
-	 ./xstrerror.lo
 
 # These are all the objects that configure may add to the library via
 # $funcs or EXTRA_OFILES.  This list exists here only for "make
@@ -229,27 +198,6 @@ CONFIGURED_OFILES = ./asprintf.o ./atexit.o				\
 	./vasprintf.o ./vfork.o ./vfprintf.o ./vprintf.o ./vsnprintf.o	\
 	 ./vsprintf.o							\
 	./waitpid.o
-CONFIGURED_LTOFILES = ./asprintf.lo ./atexit.lo				\
-	./basename.lo ./bcmp.lo ./bcopy.lo ./bsearch.lo ./bzero.lo		\
-	./calloc.lo ./clock.lo ./copysign.lo				\
-	./_doprnt.lo							\
-	./ffs.lo								\
-	./getcwd.lo ./getpagesize.lo					\
-	./index.lo ./insque.lo						\
-	./memchr.lo ./memcmp.lo ./memcpy.lo ./memmove.lo ./mempcpy.lo	\
-	 ./memset.lo ./mkstemps.lo					\
-	./pex-djgpp.lo ./pex-mpw.lo ./pex-msdos.lo ./pex-os2.lo		\
-	 ./pex-unix.lo ./pex-win32.lo					\
-	 ./putenv.lo							\
-	./random.lo ./rename.lo ./rindex.lo				\
-	./setenv.lo ./sigsetmask.lo ./snprintf.lo ./stpcpy.lo ./stpncpy.lo	\
-	 ./strcasecmp.lo ./strchr.lo ./strdup.lo ./strncasecmp.lo		\
-	 ./strncmp.lo ./strrchr.lo ./strstr.lo				\
-	 ./strtod.lo ./strtol.lo ./strtoul.lo				\
-	./tmpnam.lo							\
-	./vasprintf.lo ./vfork.lo ./vfprintf.lo ./vprintf.lo ./vsnprintf.lo	\
-	 ./vsprintf.lo							\
-	./waitpid.lo
 
 # These files are installed if the library has been configured to do so.
 INSTALLED_HEADERS =                                                     \
@@ -267,46 +215,24 @@ INSTALLED_HEADERS =                                                     \
 	$(INCDIR)/splay-tree.h                                          \
 	$(INCDIR)/ternary.h
 
-# FIXME: Libtool has to be used to create static and shared libraries
-# if it is used to compile object files. Since libiberty doesn't really
-# build shared library, we have to create the libraries we need by hand
-# and remove those created by libtool.
-$(TARGETLIB): $(REQUIRED_LTOFILES) $(EXTRA_LTOFILES) $(LTLIBOBJS)
-	libtooldir=`$(LIBTOOL) --config | sed -n -e 's/^objdir=//p'`; \
-	rm -f $(TARGETLIB) $$libtooldir/$(TARGETLIB) pic/$(TARGETLIB) \
-	  || true; \
-	$(LINK) -o $(LTTARGETLIB) -rpath $(libdir) \
-	  $(REQUIRED_LTOFILES) $(EXTRA_LTOFILES) $(LTLIBOBJS); \
-	if [ -f $$libtooldir/$(TARGETLIB) ]; then \
-	  cp $$libtooldir/$(TARGETLIB) $(TARGETLIB).tmp; \
-	  $(RANLIB) $(TARGETLIB).tmp; \
-	  $(SHELL) $(srcdir)/../move-if-change \
-	    $(TARGETLIB).tmp $(TARGETLIB); \
-	else true; fi; \
-	rm -f $(LTTARGETLIB) $$libtooldir/$(PREFIXTARGETLIB)*; \
-	if [ x$(enable_shared) = xyes ]; then \
-	  cd $$libtooldir; \
+$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
+	-rm -f $(TARGETLIB) pic/$(TARGETLIB)
+	$(AR) $(AR_FLAGS) $(TARGETLIB) \
+	  $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
+	$(RANLIB) $(TARGETLIB)
+	if [ x"$(PICFLAG)" != x ]; then \
+	  cd pic; \
 	  $(AR) $(AR_FLAGS) $(TARGETLIB) \
 	    $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \
 	  $(RANLIB) $(TARGETLIB); \
-	  [ -d ../pic ] || mkdir ../pic; \
-	  rm -f ../pic/$(TARGETLIB); \
-	  cp $(TARGETLIB) ../pic/$(TARGETLIB); \
 	  cd ..; \
 	else true; fi
 
-$(TESTLIB): $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
-	libtooldir=`$(LIBTOOL) --config | sed -n -e 's/^objdir=//p'`; \
-	rm -f $(TESTLIB) $$libtooldir/$(TESTLIB) || true; \
-	$(LINK) -o $(LTTESTLIB) -rpath $(libdir) \
-	  $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES); \
-	if [ -f $$libtooldir/$(TESTLIB) ]; then \
-	  cp $$libtooldir/$(TESTLIB) $(TESTLIB).tmp; \
-	  $(RANLIB) $(TESTLIB).tmp; \
-	  $(SHELL) $(srcdir)/../move-if-change \
-	    $(TESTLIB).tmp $(TESTLIB); \
-	else true; fi; \
-	rm -f $(LTTESTLIB) $$libtooldir/$(PREFIXTESTLIB)*
+$(TESTLIB): $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+	-rm -f $(TESTLIB)
+	$(AR) $(AR_FLAGS) $(TESTLIB) \
+	  $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+	$(RANLIB) $(TESTLIB)
 
 info: libiberty.info info-subdir
 install-info: install-info-subdir
@@ -394,6 +320,12 @@ needed-list: Makefile
 required-list: Makefile
 	echo $(REQUIRED_OFILES) > required-list
 
+stamp-picdir:
+	if [ x"$(PICFLAG)" != x ] && [ ! -d pic ]; then \
+	  mkdir pic; \
+	else true; fi
+	touch stamp-picdir
+
 .PHONY: all etags tags ls clean stage1 stage2
 
 etags tags: TAGS etags-subdir
@@ -413,9 +345,9 @@ ls:
 # Various targets for maintainers.
 
 maint-missing :
-	@$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
+	@$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
 
-maint-buildall : $(REQUIRED_LTOFILES) $(CONFIGURED_LTOFILES)
+maint-buildall : $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
 	@true
 
 maint-undoc : $(srcdir)/functions.texi
@@ -429,11 +361,9 @@ maint-deps :
 # Cleaning has to be done carefully to ensure that we don't clean our SUBDIRS
 # multiple times, hence our explicit recursion with an empty SUBDIRS.
 mostlyclean: mostlyclean-subdir
-	-libtooldir=`$(LIBTOOL) --config | sed -n -e 's/^objdir=//p'`; \
-	  rm -f $$libtooldir
-	-rm -rf *.o *.lo pic core errs \#* *.E a.out
+	-rm -rf *.o pic core errs \#* *.E a.out
 	-rm -f needed.awk needed2.awk errors dummy needed-list config.h stamp-*
-	-rm -f $(CONFIG_H) $(NEEDED_LIST)
+	-rm -f $(CONFIG_H) $(NEEDED_LIST) stamp-picdir
 	-rm -f libiberty.aux libiberty.cp libiberty.cps libiberty.fn libiberty.ky
 	-rm -f libiberty.log libiberty.tmp libiberty.tps libiberty.pg
 	-rm -f libiberty.pgs libiberty.toc libiberty.tp libiberty.tpl libiberty.vr
@@ -480,353 +410,653 @@ maintainer-clean-subdir: config.h
 	  cd $$dir && $(MAKE) $(FLAGS_TO_PASS) $$target; \
 	done
 
-# Don't export variables to the environment, in order to not confuse
-# configure.
-.NOEXPORT:
+$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS): stamp-picdir
+$(CONFIGURED_OFILES): stamp-picdir
+
 # The dependencies in the remainder of this file are automatically
 # generated by "make maint-deps".  Manual edits will be lost.
 
-./_doprnt.lo: $(srcdir)/_doprnt.c config.h $(INCDIR)/ansidecl.h \
+./_doprnt.o: $(srcdir)/_doprnt.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/_doprnt.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/_doprnt.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/_doprnt.c $(OUTPUT_OPTION)
 
-./alloca.lo: $(srcdir)/alloca.c config.h $(INCDIR)/ansidecl.h \
+./alloca.o: $(srcdir)/alloca.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/alloca.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/alloca.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/alloca.c $(OUTPUT_OPTION)
 
-./argv.lo: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/argv.c
+./argv.o: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/argv.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/argv.c $(OUTPUT_OPTION)
 
-./asprintf.lo: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/asprintf.c
+./asprintf.o: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/asprintf.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/asprintf.c $(OUTPUT_OPTION)
 
-./atexit.lo: $(srcdir)/atexit.c config.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/atexit.c
+./atexit.o: $(srcdir)/atexit.c config.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/atexit.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/atexit.c $(OUTPUT_OPTION)
 
-./basename.lo: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./basename.o: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
 	$(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/basename.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/basename.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/basename.c $(OUTPUT_OPTION)
 
-./bcmp.lo: $(srcdir)/bcmp.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/bcmp.c
+./bcmp.o: $(srcdir)/bcmp.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/bcmp.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/bcmp.c $(OUTPUT_OPTION)
 
-./bcopy.lo: $(srcdir)/bcopy.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/bcopy.c
+./bcopy.o: $(srcdir)/bcopy.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/bcopy.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/bcopy.c $(OUTPUT_OPTION)
 
-./bsearch.lo: $(srcdir)/bsearch.c config.h $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/bsearch.c
+./bsearch.o: $(srcdir)/bsearch.c config.h $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/bsearch.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/bsearch.c $(OUTPUT_OPTION)
 
-./bzero.lo: $(srcdir)/bzero.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/bzero.c
+./bzero.o: $(srcdir)/bzero.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/bzero.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/bzero.c $(OUTPUT_OPTION)
 
-./calloc.lo: $(srcdir)/calloc.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/calloc.c
+./calloc.o: $(srcdir)/calloc.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/calloc.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/calloc.c $(OUTPUT_OPTION)
 
-./choose-temp.lo: $(srcdir)/choose-temp.c config.h $(INCDIR)/ansidecl.h \
+./choose-temp.o: $(srcdir)/choose-temp.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/choose-temp.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/choose-temp.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/choose-temp.c $(OUTPUT_OPTION)
 
-./clock.lo: $(srcdir)/clock.c config.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/clock.c
+./clock.o: $(srcdir)/clock.c config.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/clock.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/clock.c $(OUTPUT_OPTION)
 
-./concat.lo: $(srcdir)/concat.c config.h $(INCDIR)/ansidecl.h \
+./concat.o: $(srcdir)/concat.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/concat.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/concat.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/concat.c $(OUTPUT_OPTION)
 
-./copysign.lo: $(srcdir)/copysign.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/copysign.c
+./copysign.o: $(srcdir)/copysign.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/copysign.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/copysign.c $(OUTPUT_OPTION)
 
-./cp-demangle.lo: $(srcdir)/cp-demangle.c config.h $(INCDIR)/ansidecl.h \
+./cp-demangle.o: $(srcdir)/cp-demangle.c config.h $(INCDIR)/ansidecl.h \
 	$(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \
 	$(INCDIR)/dyn-string.h $(INCDIR)/getopt.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/cp-demangle.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demangle.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/cp-demangle.c $(OUTPUT_OPTION)
 
-./cp-demint.lo: $(srcdir)/cp-demint.c config.h $(INCDIR)/ansidecl.h \
+./cp-demint.o: $(srcdir)/cp-demint.c config.h $(INCDIR)/ansidecl.h \
 	$(srcdir)/cp-demangle.h $(INCDIR)/demangle.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/cp-demint.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/cp-demint.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/cp-demint.c $(OUTPUT_OPTION)
 
-./cplus-dem.lo: $(srcdir)/cplus-dem.c config.h $(INCDIR)/ansidecl.h \
+./cplus-dem.o: $(srcdir)/cplus-dem.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/demangle.h $(INCDIR)/libiberty.h \
 	$(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/cplus-dem.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/cplus-dem.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/cplus-dem.c $(OUTPUT_OPTION)
 
-./dyn-string.lo: $(srcdir)/dyn-string.c config.h $(INCDIR)/ansidecl.h \
+./dyn-string.o: $(srcdir)/dyn-string.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/dyn-string.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/dyn-string.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/dyn-string.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/dyn-string.c $(OUTPUT_OPTION)
 
-./fdmatch.lo: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/fdmatch.c
+./fdmatch.o: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/fdmatch.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/fdmatch.c $(OUTPUT_OPTION)
 
-./ffs.lo: $(srcdir)/ffs.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/ffs.c
+./ffs.o: $(srcdir)/ffs.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/ffs.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/ffs.c $(OUTPUT_OPTION)
 
-./fibheap.lo: $(srcdir)/fibheap.c config.h $(INCDIR)/ansidecl.h \
+./fibheap.o: $(srcdir)/fibheap.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/fibheap.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/fibheap.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/fibheap.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/fibheap.c $(OUTPUT_OPTION)
 
-./floatformat.lo: $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \
+./floatformat.o: $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/floatformat.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/floatformat.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/floatformat.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/floatformat.c $(OUTPUT_OPTION)
 
-./fnmatch.lo: $(srcdir)/fnmatch.c config.h $(INCDIR)/fnmatch.h \
+./fnmatch.o: $(srcdir)/fnmatch.c config.h $(INCDIR)/fnmatch.h \
 	$(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/fnmatch.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/fnmatch.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/fnmatch.c $(OUTPUT_OPTION)
 
-./getcwd.lo: $(srcdir)/getcwd.c config.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/getcwd.c
+./getcwd.o: $(srcdir)/getcwd.c config.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getcwd.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/getcwd.c $(OUTPUT_OPTION)
 
-./getopt.lo: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/getopt.c
+./getopt.o: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/getopt.c $(OUTPUT_OPTION)
 
-./getopt1.lo: $(srcdir)/getopt1.c config.h $(INCDIR)/getopt.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/getopt1.c
+./getopt1.o: $(srcdir)/getopt1.c config.h $(INCDIR)/getopt.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getopt1.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/getopt1.c $(OUTPUT_OPTION)
 
-./getpagesize.lo: $(srcdir)/getpagesize.c config.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/getpagesize.c
+./getpagesize.o: $(srcdir)/getpagesize.c config.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getpagesize.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/getpagesize.c $(OUTPUT_OPTION)
 
-./getpwd.lo: $(srcdir)/getpwd.c config.h $(INCDIR)/ansidecl.h \
+./getpwd.o: $(srcdir)/getpwd.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/getpwd.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getpwd.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/getpwd.c $(OUTPUT_OPTION)
 
-./getruntime.lo: $(srcdir)/getruntime.c config.h $(INCDIR)/ansidecl.h \
+./getruntime.o: $(srcdir)/getruntime.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/getruntime.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/getruntime.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/getruntime.c $(OUTPUT_OPTION)
 
-./hashtab.lo: $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \
+./hashtab.o: $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/hashtab.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/hashtab.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/hashtab.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/hashtab.c $(OUTPUT_OPTION)
 
-./hex.lo: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./hex.o: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
 	$(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/hex.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/hex.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/hex.c $(OUTPUT_OPTION)
 
-./index.lo: $(srcdir)/index.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/index.c
+./index.o: $(srcdir)/index.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/index.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/index.c $(OUTPUT_OPTION)
 
-./insque.lo: $(srcdir)/insque.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/insque.c
+./insque.o: $(srcdir)/insque.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/insque.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/insque.c $(OUTPUT_OPTION)
 
-./lbasename.lo: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
+./lbasename.o: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
 	$(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/lbasename.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/lbasename.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/lbasename.c $(OUTPUT_OPTION)
 
-./lrealpath.lo: $(srcdir)/lrealpath.c config.h $(INCDIR)/ansidecl.h \
+./lrealpath.o: $(srcdir)/lrealpath.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/lrealpath.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/lrealpath.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/lrealpath.c $(OUTPUT_OPTION)
 
-./make-relative-prefix.lo: $(srcdir)/make-relative-prefix.c config.h \
+./make-relative-prefix.o: $(srcdir)/make-relative-prefix.c config.h \
 	$(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/make-relative-prefix.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/make-relative-prefix.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/make-relative-prefix.c $(OUTPUT_OPTION)
 
-./make-temp-file.lo: $(srcdir)/make-temp-file.c config.h $(INCDIR)/ansidecl.h \
+./make-temp-file.o: $(srcdir)/make-temp-file.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/make-temp-file.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/make-temp-file.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/make-temp-file.c $(OUTPUT_OPTION)
 
-./md5.lo: $(srcdir)/md5.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/md5.c
+./md5.o: $(srcdir)/md5.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/md5.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/md5.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/md5.c $(OUTPUT_OPTION)
 
-./memchr.lo: $(srcdir)/memchr.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/memchr.c
+./memchr.o: $(srcdir)/memchr.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memchr.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/memchr.c $(OUTPUT_OPTION)
 
-./memcmp.lo: $(srcdir)/memcmp.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/memcmp.c
+./memcmp.o: $(srcdir)/memcmp.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memcmp.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/memcmp.c $(OUTPUT_OPTION)
 
-./memcpy.lo: $(srcdir)/memcpy.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/memcpy.c
+./memcpy.o: $(srcdir)/memcpy.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memcpy.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/memcpy.c $(OUTPUT_OPTION)
 
-./memmove.lo: $(srcdir)/memmove.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/memmove.c
+./memmove.o: $(srcdir)/memmove.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memmove.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/memmove.c $(OUTPUT_OPTION)
 
-./mempcpy.lo: $(srcdir)/mempcpy.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/mempcpy.c
+./mempcpy.o: $(srcdir)/mempcpy.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/mempcpy.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/mempcpy.c $(OUTPUT_OPTION)
 
-./memset.lo: $(srcdir)/memset.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/memset.c
+./memset.o: $(srcdir)/memset.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/memset.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/memset.c $(OUTPUT_OPTION)
 
-./mkstemps.lo: $(srcdir)/mkstemps.c config.h $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/mkstemps.c
+./mkstemps.o: $(srcdir)/mkstemps.c config.h $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/mkstemps.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/mkstemps.c $(OUTPUT_OPTION)
 
-./mpw.lo: $(srcdir)/mpw.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/mpw.c
+./mpw.o: $(srcdir)/mpw.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/mpw.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/mpw.c $(OUTPUT_OPTION)
 
-./msdos.lo: $(srcdir)/msdos.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/msdos.c
+./msdos.o: $(srcdir)/msdos.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/msdos.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/msdos.c $(OUTPUT_OPTION)
 
-./objalloc.lo: $(srcdir)/objalloc.c config.h $(INCDIR)/ansidecl.h \
+./objalloc.o: $(srcdir)/objalloc.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/objalloc.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/objalloc.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/objalloc.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/objalloc.c $(OUTPUT_OPTION)
 
-./obstack.lo: $(srcdir)/obstack.c config.h $(INCDIR)/obstack.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/obstack.c
+./obstack.o: $(srcdir)/obstack.c config.h $(INCDIR)/obstack.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/obstack.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/obstack.c $(OUTPUT_OPTION)
 
-./partition.lo: $(srcdir)/partition.c config.h $(INCDIR)/ansidecl.h \
+./partition.o: $(srcdir)/partition.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(INCDIR)/partition.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/partition.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/partition.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/partition.c $(OUTPUT_OPTION)
 
-./pex-djgpp.lo: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
+./pex-djgpp.o: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-djgpp.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-djgpp.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/pex-djgpp.c $(OUTPUT_OPTION)
 
-./pex-mpw.lo: $(srcdir)/pex-mpw.c config.h $(INCDIR)/ansidecl.h \
+./pex-mpw.o: $(srcdir)/pex-mpw.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-mpw.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-mpw.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/pex-mpw.c $(OUTPUT_OPTION)
 
-./pex-msdos.lo: $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \
+./pex-msdos.o: $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h \
 	$(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-msdos.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-msdos.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/pex-msdos.c $(OUTPUT_OPTION)
 
-./pex-os2.lo: $(srcdir)/pex-os2.c config.h $(INCDIR)/ansidecl.h \
+./pex-os2.o: $(srcdir)/pex-os2.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-os2.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-os2.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/pex-os2.c $(OUTPUT_OPTION)
 
-./pex-unix.lo: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
+./pex-unix.o: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-unix.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-unix.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/pex-unix.c $(OUTPUT_OPTION)
 
-./pex-win32.lo: $(srcdir)/pex-win32.c config.h $(INCDIR)/ansidecl.h \
+./pex-win32.o: $(srcdir)/pex-win32.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/pex-win32.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-win32.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/pex-win32.c $(OUTPUT_OPTION)
 
-./physmem.lo: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
+./physmem.o: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/physmem.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/physmem.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/physmem.c $(OUTPUT_OPTION)
 
-./putenv.lo: $(srcdir)/putenv.c config.h $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/putenv.c
+./putenv.o: $(srcdir)/putenv.c config.h $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/putenv.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/putenv.c $(OUTPUT_OPTION)
 
-./random.lo: $(srcdir)/random.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/random.c
+./random.o: $(srcdir)/random.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/random.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/random.c $(OUTPUT_OPTION)
 
-./regex.lo: $(srcdir)/regex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/xregex.h \
+./regex.o: $(srcdir)/regex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/xregex.h \
 	$(INCDIR)/xregex2.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/regex.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/regex.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/regex.c $(OUTPUT_OPTION)
 
-./rename.lo: $(srcdir)/rename.c config.h $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/rename.c
+./rename.o: $(srcdir)/rename.c config.h $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/rename.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/rename.c $(OUTPUT_OPTION)
 
-./rindex.lo: $(srcdir)/rindex.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/rindex.c
+./rindex.o: $(srcdir)/rindex.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/rindex.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/rindex.c $(OUTPUT_OPTION)
 
-./safe-ctype.lo: $(srcdir)/safe-ctype.c $(INCDIR)/ansidecl.h \
+./safe-ctype.o: $(srcdir)/safe-ctype.c $(INCDIR)/ansidecl.h \
 	$(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/safe-ctype.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/safe-ctype.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/safe-ctype.c $(OUTPUT_OPTION)
 
-./setenv.lo: $(srcdir)/setenv.c config.h $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/setenv.c
+./setenv.o: $(srcdir)/setenv.c config.h $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/setenv.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/setenv.c $(OUTPUT_OPTION)
 
-./sigsetmask.lo: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/sigsetmask.c
+./sigsetmask.o: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/sigsetmask.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/sigsetmask.c $(OUTPUT_OPTION)
 
-./snprintf.lo: $(srcdir)/snprintf.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/snprintf.c
+./snprintf.o: $(srcdir)/snprintf.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/snprintf.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/snprintf.c $(OUTPUT_OPTION)
 
-./sort.lo: $(srcdir)/sort.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./sort.o: $(srcdir)/sort.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
 	$(INCDIR)/sort.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/sort.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/sort.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/sort.c $(OUTPUT_OPTION)
 
-./spaces.lo: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/spaces.c
+./spaces.o: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/spaces.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/spaces.c $(OUTPUT_OPTION)
 
-./splay-tree.lo: $(srcdir)/splay-tree.c config.h $(INCDIR)/ansidecl.h \
+./splay-tree.o: $(srcdir)/splay-tree.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(INCDIR)/splay-tree.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/splay-tree.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/splay-tree.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/splay-tree.c $(OUTPUT_OPTION)
 
-./stpcpy.lo: $(srcdir)/stpcpy.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/stpcpy.c
+./stpcpy.o: $(srcdir)/stpcpy.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/stpcpy.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/stpcpy.c $(OUTPUT_OPTION)
 
-./stpncpy.lo: $(srcdir)/stpncpy.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/stpncpy.c
+./stpncpy.o: $(srcdir)/stpncpy.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/stpncpy.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/stpncpy.c $(OUTPUT_OPTION)
 
-./strcasecmp.lo: $(srcdir)/strcasecmp.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strcasecmp.c
+./strcasecmp.o: $(srcdir)/strcasecmp.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strcasecmp.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strcasecmp.c $(OUTPUT_OPTION)
 
-./strchr.lo: $(srcdir)/strchr.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strchr.c
+./strchr.o: $(srcdir)/strchr.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strchr.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strchr.c $(OUTPUT_OPTION)
 
-./strdup.lo: $(srcdir)/strdup.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strdup.c
+./strdup.o: $(srcdir)/strdup.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strdup.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strdup.c $(OUTPUT_OPTION)
 
-./strerror.lo: $(srcdir)/strerror.c config.h $(INCDIR)/ansidecl.h \
+./strerror.o: $(srcdir)/strerror.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strerror.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strerror.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strerror.c $(OUTPUT_OPTION)
 
-./strncasecmp.lo: $(srcdir)/strncasecmp.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strncasecmp.c
+./strncasecmp.o: $(srcdir)/strncasecmp.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strncasecmp.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strncasecmp.c $(OUTPUT_OPTION)
 
-./strncmp.lo: $(srcdir)/strncmp.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strncmp.c
+./strncmp.o: $(srcdir)/strncmp.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strncmp.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strncmp.c $(OUTPUT_OPTION)
 
-./strrchr.lo: $(srcdir)/strrchr.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strrchr.c
+./strrchr.o: $(srcdir)/strrchr.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strrchr.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strrchr.c $(OUTPUT_OPTION)
 
-./strsignal.lo: $(srcdir)/strsignal.c config.h $(INCDIR)/ansidecl.h \
+./strsignal.o: $(srcdir)/strsignal.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strsignal.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strsignal.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strsignal.c $(OUTPUT_OPTION)
 
-./strstr.lo: $(srcdir)/strstr.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strstr.c
+./strstr.o: $(srcdir)/strstr.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strstr.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strstr.c $(OUTPUT_OPTION)
 
-./strtod.lo: $(srcdir)/strtod.c $(INCDIR)/ansidecl.h $(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strtod.c
+./strtod.o: $(srcdir)/strtod.c $(INCDIR)/ansidecl.h $(INCDIR)/safe-ctype.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strtod.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strtod.c $(OUTPUT_OPTION)
 
-./strtol.lo: $(srcdir)/strtol.c config.h $(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strtol.c
+./strtol.o: $(srcdir)/strtol.c config.h $(INCDIR)/safe-ctype.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strtol.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strtol.c $(OUTPUT_OPTION)
 
-./strtoul.lo: $(srcdir)/strtoul.c config.h $(INCDIR)/ansidecl.h \
+./strtoul.o: $(srcdir)/strtoul.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/safe-ctype.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/strtoul.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/strtoul.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/strtoul.c $(OUTPUT_OPTION)
 
-./ternary.lo: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
+./ternary.o: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h $(INCDIR)/ternary.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/ternary.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/ternary.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/ternary.c $(OUTPUT_OPTION)
 
-./tmpnam.lo: $(srcdir)/tmpnam.c
-	$(LTCOMPILE) -c -o $@ $(srcdir)/tmpnam.c
+./tmpnam.o: $(srcdir)/tmpnam.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/tmpnam.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/tmpnam.c $(OUTPUT_OPTION)
 
-./vasprintf.lo: $(srcdir)/vasprintf.c config.h $(INCDIR)/ansidecl.h \
+./vasprintf.o: $(srcdir)/vasprintf.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/vasprintf.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vasprintf.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/vasprintf.c $(OUTPUT_OPTION)
 
-./vfork.lo: $(srcdir)/vfork.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/vfork.c
+./vfork.o: $(srcdir)/vfork.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vfork.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/vfork.c $(OUTPUT_OPTION)
 
-./vfprintf.lo: $(srcdir)/vfprintf.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/vfprintf.c
+./vfprintf.o: $(srcdir)/vfprintf.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vfprintf.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/vfprintf.c $(OUTPUT_OPTION)
 
-./vprintf.lo: $(srcdir)/vprintf.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/vprintf.c
+./vprintf.o: $(srcdir)/vprintf.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vprintf.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/vprintf.c $(OUTPUT_OPTION)
 
-./vsnprintf.lo: $(srcdir)/vsnprintf.c config.h $(INCDIR)/ansidecl.h \
+./vsnprintf.o: $(srcdir)/vsnprintf.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/vsnprintf.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vsnprintf.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/vsnprintf.c $(OUTPUT_OPTION)
 
-./vsprintf.lo: $(srcdir)/vsprintf.c $(INCDIR)/ansidecl.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/vsprintf.c
+./vsprintf.o: $(srcdir)/vsprintf.c $(INCDIR)/ansidecl.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/vsprintf.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/vsprintf.c $(OUTPUT_OPTION)
 
-./waitpid.lo: $(srcdir)/waitpid.c config.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/waitpid.c
+./waitpid.o: $(srcdir)/waitpid.c config.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/waitpid.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/waitpid.c $(OUTPUT_OPTION)
 
-./xatexit.lo: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/xatexit.c
+./xatexit.o: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xatexit.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/xatexit.c $(OUTPUT_OPTION)
 
-./xexit.lo: $(srcdir)/xexit.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/xexit.c
+./xexit.o: $(srcdir)/xexit.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xexit.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/xexit.c $(OUTPUT_OPTION)
 
-./xmalloc.lo: $(srcdir)/xmalloc.c config.h $(INCDIR)/ansidecl.h \
+./xmalloc.o: $(srcdir)/xmalloc.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/xmalloc.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xmalloc.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/xmalloc.c $(OUTPUT_OPTION)
 
-./xmemdup.lo: $(srcdir)/xmemdup.c config.h $(INCDIR)/ansidecl.h \
+./xmemdup.o: $(srcdir)/xmemdup.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/xmemdup.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xmemdup.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/xmemdup.c $(OUTPUT_OPTION)
 
-./xstrdup.lo: $(srcdir)/xstrdup.c config.h $(INCDIR)/ansidecl.h \
+./xstrdup.o: $(srcdir)/xstrdup.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/xstrdup.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xstrdup.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/xstrdup.c $(OUTPUT_OPTION)
 
-./xstrerror.lo: $(srcdir)/xstrerror.c config.h $(INCDIR)/ansidecl.h \
+./xstrerror.o: $(srcdir)/xstrerror.c config.h $(INCDIR)/ansidecl.h \
 	$(INCDIR)/libiberty.h
-	$(LTCOMPILE) -c -o $@ $(srcdir)/xstrerror.c
+	if [ x"$(PICFLAG)" != x ]; then \
+	  $(COMPILE.c) $(PICFLAG) $(srcdir)/xstrerror.c -o pic/$@; \
+	else true; fi
+	$(COMPILE.c) $(srcdir)/xstrerror.c $(OUTPUT_OPTION)
 
+# Don't export variables to the environment, in order to not confuse
+# configure.
+.NOEXPORT:
diff --git a/libiberty/aclocal.m4 b/libiberty/aclocal.m4
index 3dbf736b3c4..f33e0c6218d 100644
--- a/libiberty/aclocal.m4
+++ b/libiberty/aclocal.m4
@@ -1,7 +1,6 @@
 sinclude(../config/accross.m4)
 sinclude(../config/acx.m4)
 sinclude(../config/no-executables.m4)
-sinclude(../libtool.m4)
 
 dnl See whether strncmp reads past the end of its string parameters.
 dnl On some versions of SunOS4 at least, strncmp reads a word at a time
diff --git a/libiberty/config.table b/libiberty/config.table
index f1f3fdf55c8..1867cfeaafa 100644
--- a/libiberty/config.table
+++ b/libiberty/config.table
@@ -20,6 +20,33 @@ else
   frags=
 fi
 
+# If they didn't specify --enable-shared, don't generate shared libs.
+case "${enable_shared}" in
+  yes) shared=yes ;;
+  no) shared=no ;;
+  "") shared=no ;;
+  *) shared=yes ;;
+esac
+if [ "${shared}" = "yes" ]; then
+  frag=
+  case "${host}" in
+    *-*-cygwin*)	;;
+    alpha*-*-linux*)	frag=mh-elfalphapic ;;
+    arm*-*-*)		frag=mh-armpic ;;
+    hppa*-*-*)		frag=mh-papic ;;
+    i[34567]86-*-* | x86_64-*-*)
+			frag=mh-x86pic ;;
+    powerpc*-*-aix*)	;;
+    powerpc*-*-*)	frag=mh-ppcpic ;;
+    sparc*-*-*)		frag=mh-sparcpic ;;
+    s390*-*-*)		frag=mh-s390pic ;;
+    *)			frag=mh-${host_cpu}pic ;;
+  esac
+  if [ -n "${frag}" ]; then
+    frags="${frags} ${libiberty_topdir}/config/${frag}"
+  fi
+fi
+
 echo "# Warning: this fragment is automatically generated" > temp-frag
 
 for frag in ${frags}; do
@@ -30,5 +57,12 @@ for frag in ${frags}; do
   fi
 done
 
+# record if we want to build shared libs.
+if [ "${shared}" = "yes" ]; then
+  echo enable_shared = yes >> temp-frag
+else
+  echo enable_shared = no >> temp-frag
+fi
+
 frag=xhost-mkfrag
 ${CONFIG_SHELL-/bin/sh} ${libiberty_topdir}/move-if-change temp-frag xhost-mkfrag
diff --git a/libiberty/configure b/libiberty/configure
index 3d35e679046..fc461eb3d5e 100755
--- a/libiberty/configure
+++ b/libiberty/configure
@@ -309,7 +309,7 @@ ac_includes_default="\
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS libiberty_topdir MAINT NOTMAINT MAKEINFO BUILD_INFO PERL HAVE_PERL build build_cpu build_vendor build_os host host_cpu host_vendor host_os AR ac_ct_AR RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP ac_libiberty_warn_cflags LN_S STRIP ac_ct_STRIP LIBTOOL INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA EGREP LIBOBJS CHECK target_header_dir pexecute ltpexecute INSTALL_DEST enable_shared LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS libiberty_topdir MAINT NOTMAINT MAKEINFO BUILD_INFO PERL HAVE_PERL build build_cpu build_vendor build_os host host_cpu host_vendor host_os AR ac_ct_AR RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP ac_libiberty_warn_cflags NO_MINUS_C_MINUS_O OUTPUT_OPTION INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA EGREP LIBOBJS CHECK target_header_dir pexecute INSTALL_DEST LTLIBOBJS'
 ac_subst_files='host_makefile_frag'
 
 # Initialize some variables set by options.
@@ -847,10 +847,6 @@ Optional Features:
   --enable-maintainer-mode
                           enable make rules and dependencies not useful
                           (and sometimes confusing) to the casual installer
-  --enable-shared=PKGS  build shared libraries default=no
-  --enable-static=PKGS  build static libraries default=yes
-  --enable-fast-install=PKGS  optimize for fast installation default=yes
-  --disable-libtool-lock  avoid locking (might break parallel builds)
   --enable-install-libiberty       Install headers for end users
 
 Optional Packages:
@@ -860,8 +856,6 @@ Optional Packages:
   --with-build-subdir=SUBDIR       Configuring in a subdirectory for build
   --with-cross-host=HOST           Configuring with a cross compiler
   --with-newlib                    Configuring with newlib
-  --with-gnu-ld           assume the C compiler uses GNU ld default=no
-  --with-pic              try to use only PIC/non-PIC objects default=use both
 
 Some influential environment variables:
   CC          C compiler command
@@ -963,7 +957,7 @@ esac
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi
-    cd $ac_popdir
+    cd "$ac_popdir"
   done
 fi
 
@@ -1312,9 +1306,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-# FIXME: libiberty doesn't support --disable-static
-enable_static=yes
-
 # This works around the fact that libtool configuration may change LD
 # for this particular configuration, but some shells, instead of
 # keeping the changes in LD private, export them just because LD is
@@ -2339,8 +2330,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2398,8 +2388,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2515,8 +2504,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2570,8 +2558,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2616,8 +2603,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2661,8 +2647,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -2943,6 +2928,105 @@ if test x$GCC = xyes; then
 fi
 
 
+if test "x$CC" != xcc; then
+  echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
+echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6
+else
+  echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
+echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6
+fi
+set dummy $CC; ac_cc=`echo $2 |
+		      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if eval "test \"\${ac_cv_prog_cc_${ac_cc}_c_o+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest.$ac_objext >&5'
+if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+   test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); };
+then
+  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+  if test "x$CC" != xcc; then
+    # Test first that cc exists at all.
+    if { ac_try='cc -c conftest.$ac_ext >&5'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+      ac_try='cc -c conftest.$ac_ext -o conftest.$ac_objext >&5'
+      if { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 test -f conftest.$ac_objext && { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); };
+      then
+	# cc works too.
+	:
+      else
+	# cc exists but doesn't like -o.
+	eval ac_cv_prog_cc_${ac_cc}_c_o=no
+      fi
+    fi
+  fi
+else
+  eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f conftest*
+
+fi
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+
+cat >>confdefs.h <<\_ACEOF
+#define NO_MINUS_C_MINUS_O 1
+_ACEOF
+
+fi
+
+# autoconf is lame and doesn't give us any substitution variable for this.
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
+  NO_MINUS_C_MINUS_O=yes
+else
+  OUTPUT_OPTION='-o $@'
+fi
+
+
+
 
 echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
 echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
@@ -3019,8 +3103,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3080,8 +3163,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3157,8 +3239,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3199,8 +3280,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -3333,1031 +3413,6 @@ echo "$as_me: error: unknown endianess - sorry, please pre-set ac_cv_c_bigendian
 fi
 
 
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_shared=no
-fi;
-
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_static=yes
-fi;
-# Check whether --enable-fast-install or --disable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
-case $enableval in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac
-else
-  enable_fast_install=yes
-fi;
-
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi;
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  echo "$as_me:$LINENO: checking for ld used by GCC" >&5
-echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
-else
-  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
-fi
-if test "${lt_cv_path_LD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  lt_cv_prog_gnu_ld=yes
-else
-  lt_cv_prog_gnu_ld=no
-fi
-fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
-if test "${lt_cv_ld_reload_flag+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_ld_reload_flag='-r'
-fi
-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
-if test "${lt_cv_path_NM+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    tmp_nm=$ac_dir/${ac_tool_prefix}nm
-    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      # Tru64's nm complains that /dev/null is an invalid object file
-      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -B"
-	break
-      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	lt_cv_path_NM="$tmp_nm -p"
-	break
-      else
-	lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi
-fi
-
-NM="$lt_cv_path_NM"
-echo "$as_me:$LINENO: result: $NM" >&5
-echo "${ECHO_T}$NM" >&6
-
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-else
-  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6
-fi
-
-echo "$as_me:$LINENO: checking how to recognise dependant libraries" >&5
-echo $ECHO_N "checking how to recognise dependant libraries... $ECHO_C" >&6
-if test "${lt_cv_deplibs_check_method+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi4*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin* | mingw* |pw32*)
-  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  # this will be overwritten by pass_all, but leave it in just in case
-  lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  case "$host_os" in
-  rhapsody* | darwin1.012)
-    lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
-    ;;
-  *) # Darwin 1.3 on
-    lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
-    ;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | kfreebsd*-gnu)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20*|hpux11*)
-  case $host_cpu in
-  hppa*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_cmd=/usr/bin/file
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  esac
-  ;;
-
-irix5* | irix6*)
-  case $host_os in
-  irix5*)
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
-    ;;
-  *)
-    case $LD in
-    *-32|*"-32 ") libmagic=32-bit;;
-    *-n32|*"-n32 ") libmagic=N32;;
-    *-64|*"-64 ") libmagic=64-bit;;
-    *) libmagic=never-match;;
-    esac
-    # this will be overridden with pass_all, but let us keep it just in case
-    lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
-    ;;
-  esac
-  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd* | knetbsd*-gnu)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
-  fi
-  ;;
-
-newsos6)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-osf3* | osf4* | osf5*)
-  # this will be overridden with pass_all, but let us keep it just in case
-  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sco3.2v5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  lt_cv_file_magic_test_file=/lib/libc.so
-  ;;
-
-sysv5uw[78]* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-  case $host_vendor in
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  esac
-  ;;
-esac
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-
-
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  case $MAGIC_CMD in
-  /*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-  ?:/*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  ac_save_MAGIC_CMD="$MAGIC_CMD"
-  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/bin:$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    egrep "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  MAGIC_CMD="$ac_save_MAGIC_CMD"
-  ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  else
-    MAGIC_CMD=:
-  fi
-fi
-
-  fi
-  ;;
-esac
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  RANLIB=$ac_ct_RANLIB
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-  STRIP=$ac_ct_STRIP
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
-
-fi;
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
-else
-  pic_mode=default
-fi;
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 4071 "configure"' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
-  fi
-  rm -rf conftest*
-  ;;
-
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case "`/usr/bin/file conftest.o`" in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case "`/usr/bin/file conftest.o`" in
-    *32-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
-if test "${lt_cv_cc_needs_belf+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-
-
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-     if test x$gcc_no_link = xyes; then
-  { { echo "$as_me:$LINENO: error: Link tests are not allowed after GCC_NO_EXECUTABLES." >&5
-echo "$as_me: error: Link tests are not allowed after GCC_NO_EXECUTABLES." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  lt_cv_cc_needs_belf=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-lt_cv_cc_needs_belf=no
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-
-esac
-
-
-# Save cache, so that ltconfig can load it
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
-  (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
-      ;;
-    esac;
-} |
-  sed '
-     t clear
-     : clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
-    cat confcache >$cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| { { echo "$as_me:$LINENO: error: libtool configure failed" >&5
-echo "$as_me: error: libtool configure failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-# Reload cache, that may have been modified by ltconfig
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
-    esac
-  fi
-else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-
-
-
-
 
 
           ac_config_headers="$ac_config_headers config.h:config.in"
@@ -4567,8 +3622,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4632,8 +3686,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4694,8 +3747,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -4776,8 +3828,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5006,8 +4057,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5069,8 +4119,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5110,8 +4159,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5167,8 +4215,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5208,8 +4255,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5273,8 +4319,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5305,10 +4350,8 @@ See \`config.log' for more details." >&2;}
 esac
 else
   if test "$cross_compiling" = yes; then
-  { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
    { (exit 1); exit 1; }; }
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -5421,8 +4464,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5488,8 +4530,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5535,8 +4576,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5582,8 +4622,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5660,8 +4699,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -5894,8 +4932,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6309,8 +5346,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6369,8 +5405,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6470,8 +5505,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6609,8 +5643,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -6831,8 +5864,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7177,8 +6209,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7289,8 +6320,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7359,8 +6389,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7425,8 +6454,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7522,8 +6550,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7599,8 +6626,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -7636,15 +6662,12 @@ fi
 
 # Figure out which version of pexecute to use.
 case "${host}" in
-     *-*-mingw* | *-*-winnt*)	pex=./pex-win32  ;;
-     *-*-msdosdjgpp*)		pex=./pex-djgpp  ;;
-     *-*-msdos*)		pex=./pex-msdos  ;;
-     *-*-os2-emx*)		pex=./pex-os2    ;;
-     *)				pex=./pex-unix   ;;
+     *-*-mingw* | *-*-winnt*)	pexecute=./pex-win32.o  ;;
+     *-*-msdosdjgpp*)		pexecute=./pex-djgpp.o  ;;
+     *-*-msdos*)		pexecute=./pex-msdos.o  ;;
+     *-*-os2-emx*)		pexecute=./pex-os2.o    ;;
+     *)				pexecute=./pex-unix.o   ;;
 esac
-pexecute=${pex}.o
-ltpexecute=${pex}.lo
-
 
 
 if test x$gcc_no_link = xyes; then
@@ -7776,8 +6799,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
   (eval $ac_try) 2>&5
   ac_status=$?
@@ -8109,7 +7131,6 @@ else
 fi
 
 
-# Add `./' to avoid VPATH.
 
 L=""
 for l in x $LIBOBJS; do
@@ -8120,18 +7141,6 @@ for l in x $LIBOBJS; do
 done
 LIBOBJS="$L"
 
-
-L=""
-for l in x $LTLIBOBJS; do
-  case $l in
-    x) ;;
-    *) L="$L ./$l" ;;
-  esac
-done
-LTLIBOBJS="$L"
-
-
-
 # We need multilib support, but only if configuring for the target.
                     ac_config_files="$ac_config_files Makefile testsuite/Makefile"
 
@@ -8798,10 +7807,8 @@ s,@EXEEXT@,$EXEEXT,;t t
 s,@OBJEXT@,$OBJEXT,;t t
 s,@CPP@,$CPP,;t t
 s,@ac_libiberty_warn_cflags@,$ac_libiberty_warn_cflags,;t t
-s,@LN_S@,$LN_S,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@LIBTOOL@,$LIBTOOL,;t t
+s,@NO_MINUS_C_MINUS_O@,$NO_MINUS_C_MINUS_O,;t t
+s,@OUTPUT_OPTION@,$OUTPUT_OPTION,;t t
 s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
 s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
 s,@INSTALL_DATA@,$INSTALL_DATA,;t t
@@ -8810,9 +7817,7 @@ s,@LIBOBJS@,$LIBOBJS,;t t
 s,@CHECK@,$CHECK,;t t
 s,@target_header_dir@,$target_header_dir,;t t
 s,@pexecute@,$pexecute,;t t
-s,@ltpexecute@,$ltpexecute,;t t
 s,@INSTALL_DEST@,$INSTALL_DEST,;t t
-s,@enable_shared@,$enable_shared,;t t
 s,@LTLIBOBJS@,$LTLIBOBJS,;t t
 /@host_makefile_frag@/r $host_makefile_frag
 s,@host_makefile_frag@,,;t t
@@ -8982,11 +7987,6 @@ esac
   *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
   esac
 
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
   # Let's still pretend it is `configure' which instantiates (i.e., don't
   # use $as_me), people would be surprised to read:
   #    /* config.h.  Generated by config.status.  */
@@ -9025,6 +8025,12 @@ echo "$as_me: error: cannot find input file: $f" >&2;}
 	 fi;;
       esac
     done` || { (exit 1); exit 1; }
+
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
   sed "$ac_vpsub
diff --git a/libiberty/configure.ac b/libiberty/configure.ac
index 012bbfc262c..650faee115a 100644
--- a/libiberty/configure.ac
+++ b/libiberty/configure.ac
@@ -4,9 +4,6 @@ AC_PREREQ(2.59)
 AC_INIT
 AC_CONFIG_SRCDIR([xmalloc.c])
 
-# FIXME: libiberty doesn't support --disable-static
-enable_static=yes
-
 # This works around the fact that libtool configuration may change LD
 # for this particular configuration, but some shells, instead of
 # keeping the changes in LD private, export them just because LD is
@@ -121,15 +118,27 @@ if test x$GCC = xyes; then
 fi
 AC_SUBST(ac_libiberty_warn_cflags)
 
+AC_PROG_CC_C_O
+# autoconf is lame and doesn't give us any substitution variable for this.
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
+  NO_MINUS_C_MINUS_O=yes
+else
+  OUTPUT_OPTION='-o $@'
+fi
+AC_SUBST(NO_MINUS_C_MINUS_O)
+AC_SUBST(OUTPUT_OPTION)
+
 AC_C_CONST
 AC_C_INLINE
 AC_C_BIGENDIAN_CROSS
 
+dnl When we start using libtool:
 dnl Default to a non shared library.  This may be overridden by the
 dnl configure option --enable-shared.
-AM_DISABLE_SHARED
+dnl AM_DISABLE_SHARED
 
-AM_PROG_LIBTOOL
+dnl When we start using libtool:
+dnl AM_PROG_LIBTOOL
 
 dnl When we start using automake:
 dnl AM_CONFIG_HEADER(config.h:config.in)
@@ -506,16 +515,13 @@ fi
 
 # Figure out which version of pexecute to use.
 case "${host}" in
-     *-*-mingw* | *-*-winnt*)	pex=./pex-win32  ;;
-     *-*-msdosdjgpp*)		pex=./pex-djgpp  ;;
-     *-*-msdos*)		pex=./pex-msdos  ;;
-     *-*-os2-emx*)		pex=./pex-os2    ;;
-     *)				pex=./pex-unix   ;;
+     *-*-mingw* | *-*-winnt*)	pexecute=./pex-win32.o  ;;
+     *-*-msdosdjgpp*)		pexecute=./pex-djgpp.o  ;;
+     *-*-msdos*)		pexecute=./pex-msdos.o  ;;
+     *-*-os2-emx*)		pexecute=./pex-os2.o    ;;
+     *)				pexecute=./pex-unix.o   ;;
 esac
-pexecute=${pex}.o
-ltpexecute=${pex}.lo
 AC_SUBST(pexecute)
-AC_SUBST(ltpexecute)
 
 libiberty_AC_FUNC_STRNCMP
 
@@ -528,7 +534,6 @@ else
 fi
 AC_SUBST(INSTALL_DEST)
 
-# Add `./' to avoid VPATH.
 m4_pattern_allow(LIBOBJS)
 L=""
 for l in x $LIBOBJS; do
@@ -539,19 +544,6 @@ for l in x $LIBOBJS; do
 done
 LIBOBJS="$L"
 
-m4_pattern_allow(LTLIBOBJS)
-L=""
-for l in x $LTLIBOBJS; do
-  case $l in
-    x) ;;
-    *) L="$L ./$l" ;;
-  esac
-done
-LTLIBOBJS="$L"
-
-dnl Delete it when we start creating shared library with libtool.
-AC_SUBST(enable_shared)
-
 # We need multilib support, but only if configuring for the target.
 AC_CONFIG_FILES([Makefile testsuite/Makefile])
 AC_CONFIG_COMMANDS([default],
diff --git a/libiberty/maint-tool b/libiberty/maint-tool
index 5e35027712c..bfc53042247 100644
--- a/libiberty/maint-tool
+++ b/libiberty/maint-tool
@@ -76,7 +76,7 @@ sub missing {
     for $f (sort keys %listed) {
 	if ($f =~ /(.*)\.c$/) {
 	    $base = $1;
-	    if (! $listed{"$base.lo"}) {
+	    if (! $listed{"$base.o"}) {
 		print "O $f\n";
 	    }
 	}
@@ -213,7 +213,10 @@ sub locals_first {
 
 sub deps {
 
-    $crule .= "\t\$(LTCOMPILE) -c -o \$@ \$<\n";
+    $crule  = "\tif [ x\"\$(PICFLAG)\" != x ]; then \\\n";
+    $crule .= "\t  \$(COMPILE.c) \$(PICFLAG) \$< -o pic/\$@; \\\n";
+    $crule .= "\telse true; fi\n";
+    $crule .= "\t\$(COMPILE.c) \$< \$(OUTPUT_OPTION)\n";
     $crule .= "\n";
 
     $incdir = shift @ARGV;
@@ -262,7 +265,7 @@ sub deps {
 	    }
 	    @deps = sort { &locals_first($a,$b) } keys %scanned;
 	    $obj = $f;
-	    $obj =~ s/\.c$/.lo/;
+	    $obj =~ s/\.c$/.o/;
 	    $obj = "./$obj:";
 	    if ($#deps >= 0) {
 		print OUT "$obj \$(srcdir)/$f";