diff options
| -rw-r--r-- | gdb/ChangeLog | 19 | ||||
| -rw-r--r-- | gdb/annotate.c | 6 | ||||
| -rw-r--r-- | gdb/arch-utils.c | 55 | ||||
| -rw-r--r-- | gdb/arch-utils.h | 10 | ||||
| -rw-r--r-- | gdb/auxv.c | 73 | ||||
| -rw-r--r-- | gdb/auxv.h | 2 | ||||
| -rw-r--r-- | gdb/ax-gdb.c | 12 | ||||
| -rw-r--r-- | gdb/ax-gdb.h | 2 | ||||
| -rw-r--r-- | gdb/ax-general.c | 2 | ||||
| -rw-r--r-- | gdb/breakpoint.h | 249 | ||||
| -rw-r--r-- | gdb/buildsym.h | 17 |
11 files changed, 250 insertions, 197 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 0dafb2765df..f6e90aa5d36 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,10 +1,23 @@ +2010-12-31 Michael Snyder <msnyder@vmware.com> + + * annotate.c: Comment cleanup, shorten long lines. + * arch-utils.c: Ditto. + * arch-utils.h: Ditto. + * auxv.c: Ditto. + * auxv.h: Ditto. + * ax-gdb.c: Ditto. + * ax-gdb.h: Ditto. + * ax-general.c: Ditto. + * breakpoint.h: Ditto. + * buildsym.h: Ditto. + 2010-12-30 Mike Frysinger <vapier@gentoo.org> * bfin-tdep.c (bfin_register_type): Move || to start of line. 2010-12-29 Michael Snyder <msnyder@vmware.com> - * bcache.c: Comment clean-up. + * bcache.c: Comment clean-up, shorten long lines.. * block.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. @@ -71,7 +84,7 @@ 2010-12-28 Michael Snyder <msnyder@vmware.com> - * command.h: Comment clean-up. + * command.h: Comment clean-up, shorten long lines. * cli/cli-cmds.c: Ditto. * cli/cli-cmds.h: Ditto. * cli/cli-decode.c: Ditto. @@ -85,7 +98,7 @@ 2010-12-28 Michael Snyder <msnyder@vmware.com> - * event-loop.c: Comment clean-up. + * event-loop.c: Comment clean-up, shorten long lines. * event-loop.h: Ditto. * event-top.c: Ditto. * gdb.c: Ditto. diff --git a/gdb/annotate.c b/gdb/annotate.c index 66774b01996..1085291535f 100644 --- a/gdb/annotate.c +++ b/gdb/annotate.c @@ -26,7 +26,7 @@ #include "observer.h" -/* Prototypes for local functions. */ +/* Prototypes for local functions. */ extern void _initialize_annotate (void); @@ -57,7 +57,7 @@ breakpoints_changed (void) target_terminal_ours (); printf_unfiltered (("\n\032\032breakpoints-invalid\n")); if (ignore_count_changed) - ignore_count_changed = 0; /* Avoid multiple break annotations. */ + ignore_count_changed = 0; /* Avoid multiple break annotations. */ } } @@ -65,7 +65,7 @@ breakpoints_changed (void) want to provide successive multiple breakpoints-invalid messages that are all caused by the fact that the ignore count is changing (which could keep the GUI very busy). One is enough, after the - target actually "stops". */ + target actually "stops". */ void annotate_ignore_count_change (void) diff --git a/gdb/arch-utils.c b/gdb/arch-utils.c index e8836d2d636..80afbfbf2a7 100644 --- a/gdb/arch-utils.c +++ b/gdb/arch-utils.c @@ -23,7 +23,7 @@ #include "arch-utils.h" #include "buildsym.h" #include "gdbcmd.h" -#include "inferior.h" /* enum CALL_DUMMY_LOCATION et.al. */ +#include "inferior.h" /* enum CALL_DUMMY_LOCATION et al. */ #include "gdb_string.h" #include "regcache.h" #include "gdb_assert.h" @@ -146,7 +146,7 @@ core_addr_greaterthan (CORE_ADDR lhs, CORE_ADDR rhs) return (lhs > rhs); } -/* Misc helper functions for targets. */ +/* Misc helper functions for targets. */ CORE_ADDR core_addr_identity (struct gdbarch *gdbarch, CORE_ADDR addr) @@ -186,8 +186,8 @@ cannot_register_not (struct gdbarch *gdbarch, int regnum) } /* Legacy version of target_virtual_frame_pointer(). Assumes that - there is an gdbarch_deprecated_fp_regnum and that it is the same, cooked or - raw. */ + there is an gdbarch_deprecated_fp_regnum and that it is the same, + cooked or raw. */ void legacy_virtual_frame_pointer (struct gdbarch *gdbarch, @@ -211,7 +211,8 @@ legacy_virtual_frame_pointer (struct gdbarch *gdbarch, else /* Should this be an internal error? I guess so, it is reflecting an architectural limitation in the current design. */ - internal_error (__FILE__, __LINE__, _("No virtual frame pointer available")); + internal_error (__FILE__, __LINE__, + _("No virtual frame pointer available")); *frame_offset = 0; } @@ -373,8 +374,9 @@ choose_architecture_for_target (const struct target_desc *target_desc, if (compat1 == NULL && compat2 == NULL) { - /* BFD considers the architectures incompatible. Check our target - description whether it accepts SELECTED as compatible anyway. */ + /* BFD considers the architectures incompatible. Check our + target description whether it accepts SELECTED as compatible + anyway. */ if (tdesc_compatible_p (target_desc, selected)) return from_target; @@ -391,10 +393,10 @@ choose_architecture_for_target (const struct target_desc *target_desc, if (compat1 == compat2) return compat1; - /* If the two didn't match, but one of them was a default architecture, - assume the more specific one is correct. This handles the case - where an executable or target description just says "mips", but - the other knows which MIPS variant. */ + /* If the two didn't match, but one of them was a default + architecture, assume the more specific one is correct. This + handles the case where an executable or target description just + says "mips", but the other knows which MIPS variant. */ if (compat1->the_default) return compat2; if (compat2->the_default) @@ -408,7 +410,7 @@ choose_architecture_for_target (const struct target_desc *target_desc, return selected; } -/* Functions to manipulate the architecture of the target */ +/* Functions to manipulate the architecture of the target. */ enum set_arch { set_arch_auto, set_arch_manual }; @@ -426,7 +428,7 @@ selected_architecture_name (void) } /* Called if the user enters ``show architecture'' without an - argument. */ + argument. */ static void show_architecture (struct ui_file *file, int from_tty, @@ -443,7 +445,7 @@ The target architecture is assumed to be %s\n"), set_architecture_string); /* Called if the user enters ``set architecture'' with or without an - argument. */ + argument. */ static void set_architecture (char *ignore_args, int from_tty, struct cmd_list_element *c) @@ -583,14 +585,14 @@ initialize_current_architecture (void) const char **arches = gdbarch_printable_names (); struct gdbarch_info info; - /* determine a default architecture and byte order. */ + /* determine a default architecture and byte order. */ gdbarch_info_init (&info); - /* Find a default architecture. */ + /* Find a default architecture. */ if (default_bfd_arch == NULL) { /* Choose the architecture by taking the first one - alphabetically. */ + alphabetically. */ const char *chosen = arches[0]; const char **arch; for (arch = arches; *arch != NULL; arch++) @@ -613,7 +615,7 @@ initialize_current_architecture (void) if (default_byte_order == BFD_ENDIAN_UNKNOWN && default_bfd_vec != NULL) { - /* Extract BFD's default vector's byte order. */ + /* Extract BFD's default vector's byte order. */ switch (default_bfd_vec->byteorder) { case BFD_ENDIAN_BIG: @@ -628,7 +630,7 @@ initialize_current_architecture (void) } if (default_byte_order == BFD_ENDIAN_UNKNOWN) { - /* look for ``*el-*'' in the target name. */ + /* look for ``*el-*'' in the target name. */ const char *chp; chp = strchr (target_name, '-'); if (chp != NULL @@ -651,9 +653,9 @@ initialize_current_architecture (void) "initial architecture failed")); /* Create the ``set architecture'' command appending ``auto'' to the - list of architectures. */ + list of architectures. */ { - /* Append ``auto''. */ + /* Append ``auto''. */ int nr; for (nr = 0; arches[nr] != NULL; nr++); arches = xrealloc (arches, sizeof (char*) * (nr + 2)); @@ -742,12 +744,13 @@ gdbarch_info_fill (struct gdbarch_info *info) gdb_assert (info->bfd_arch_info != NULL); } -/* Return "current" architecture. If the target is running, this is the - architecture of the selected frame. Otherwise, the "current" architecture - defaults to the target architecture. +/* Return "current" architecture. If the target is running, this is + the architecture of the selected frame. Otherwise, the "current" + architecture defaults to the target architecture. - This function should normally be called solely by the command interpreter - routines to determine the architecture to execute a command in. */ + This function should normally be called solely by the command + interpreter routines to determine the architecture to execute a + command in. */ struct gdbarch * get_current_arch (void) { diff --git a/gdb/arch-utils.h b/gdb/arch-utils.h index dbeb67f7379..ac6676ef9db 100644 --- a/gdb/arch-utils.h +++ b/gdb/arch-utils.h @@ -59,7 +59,7 @@ extern int leaving space for inferior function call return breakpoints. */ extern CORE_ADDR displaced_step_at_entry_point (struct gdbarch *gdbarch); -/* The only possible cases for inner_than. */ +/* The only possible cases for inner_than. */ extern int core_addr_lessthan (CORE_ADDR lhs, CORE_ADDR rhs); extern int core_addr_greaterthan (CORE_ADDR lhs, CORE_ADDR rhs); @@ -68,20 +68,20 @@ extern int core_addr_greaterthan (CORE_ADDR lhs, CORE_ADDR rhs); extern CORE_ADDR core_addr_identity (struct gdbarch *gdbarch, CORE_ADDR addr); extern gdbarch_convert_from_func_ptr_addr_ftype convert_from_func_ptr_addr_identity; -/* No-op conversion of reg to regnum. */ +/* No-op conversion of reg to regnum. */ extern int no_op_reg_to_regnum (struct gdbarch *gdbarch, int reg); -/* Do nothing version of elf_make_msymbol_special. */ +/* Do nothing version of elf_make_msymbol_special. */ void default_elf_make_msymbol_special (asymbol *sym, struct minimal_symbol *msym); -/* Do nothing version of coff_make_msymbol_special. */ +/* Do nothing version of coff_make_msymbol_special. */ void default_coff_make_msymbol_special (int val, struct minimal_symbol *msym); /* Version of cannot_fetch_register() / cannot_store_register() that - always fails. */ + always fails. */ int cannot_register_not (struct gdbarch *gdbarch, int regnum); diff --git a/gdb/auxv.c b/gdb/auxv.c index 71144dc6b69..68b1cbad1e3 100644 --- a/gdb/auxv.c +++ b/gdb/auxv.c @@ -34,8 +34,8 @@ #include <fcntl.h> -/* This function handles access via /proc/PID/auxv, which is a common method - for native targets. */ +/* This function handles access via /proc/PID/auxv, which is a common + method for native targets. */ static LONGEST procfs_xfer_auxv (gdb_byte *readbuf, @@ -90,35 +90,39 @@ ld_so_xfer_auxv (gdb_byte *readbuf, if (MSYMBOL_SIZE (msym) != ptr_size) return -1; - /* POINTER_ADDRESS is a location where the `_dl_auxv' variable resides. - DATA_ADDRESS is the inferior value present in `_dl_auxv', therefore the - real inferior AUXV address. */ + /* POINTER_ADDRESS is a location where the `_dl_auxv' variable + resides. DATA_ADDRESS is the inferior value present in + `_dl_auxv', therefore the real inferior AUXV address. */ pointer_address = SYMBOL_VALUE_ADDRESS (msym); /* The location of the _dl_auxv symbol may no longer be correct if - ld.so runs at a different address than the one present in the file. - This is very common case - for unprelinked ld.so or with a PIE executable. - PIE executable forces random address even for libraries already being - prelinked to some address. PIE executables themselves are never prelinked - even on prelinked systems. Prelinking of a PIE executable would block - their purpose of randomizing load of everything including the executable. - - If the memory read fails, return -1 to fallback on another mechanism for - retrieving the AUXV. - - In most cases of a PIE running under valgrind there is no way to find - out the base addresses of any of ld.so, executable or AUXV as everything - is randomized and /proc information is not relevant for the virtual - executable running under valgrind. We think that we might need a valgrind - extension to make it work. This is PR 11440. */ + ld.so runs at a different address than the one present in the + file. This is very common case - for unprelinked ld.so or with a + PIE executable. PIE executable forces random address even for + libraries already being prelinked to some address. PIE + executables themselves are never prelinked even on prelinked + systems. Prelinking of a PIE executable would block their + purpose of randomizing load of everything including the + executable. + + If the memory read fails, return -1 to fallback on another + mechanism for retrieving the AUXV. + + In most cases of a PIE running under valgrind there is no way to + find out the base addresses of any of ld.so, executable or AUXV + as everything is randomized and /proc information is not relevant + for the virtual executable running under valgrind. We think that + we might need a valgrind extension to make it work. This is PR + 11440. */ if (target_read_memory (pointer_address, ptr_buf, ptr_size) != 0) return -1; data_address = extract_typed_address (ptr_buf, ptr_type); - /* Possibly still not initialized such as during an inferior startup. */ + /* Possibly still not initialized such as during an inferior + startup. */ if (data_address == 0) return -1; @@ -132,8 +136,8 @@ ld_so_xfer_auxv (gdb_byte *readbuf, return -1; } - /* Stop if trying to read past the existing AUXV block. The final AT_NULL - was already returned before. */ + /* Stop if trying to read past the existing AUXV block. The final + AT_NULL was already returned before. */ if (offset >= auxv_pair_size) { @@ -154,9 +158,10 @@ ld_so_xfer_auxv (gdb_byte *readbuf, if (block > len) block = len; - /* Reading sizes smaller than AUXV_PAIR_SIZE is not supported. Tails - unaligned to AUXV_PAIR_SIZE will not be read during a call (they - should be completed during next read with new/extended buffer). */ + /* Reading sizes smaller than AUXV_PAIR_SIZE is not supported. + Tails unaligned to AUXV_PAIR_SIZE will not be read during a + call (they should be completed during next read with + new/extended buffer). */ block &= -auxv_pair_size; if (block == 0) @@ -174,8 +179,9 @@ ld_so_xfer_auxv (gdb_byte *readbuf, data_address += block; len -= block; - /* Check terminal AT_NULL. This function is being called indefinitely - being extended its READBUF until it returns EOF (0). */ + /* Check terminal AT_NULL. This function is being called + indefinitely being extended its READBUF until it returns EOF + (0). */ while (block >= auxv_pair_size) { @@ -207,10 +213,11 @@ memory_xfer_auxv (struct target_ops *ops, gdb_assert (object == TARGET_OBJECT_AUXV); gdb_assert (readbuf || writebuf); - /* ld_so_xfer_auxv is the only function safe for virtual executables being - executed by valgrind's memcheck. Using ld_so_xfer_auxv during inferior - startup is problematic, because ld.so symbol tables have not yet been - relocated. So GDB uses this function only when attaching to a process. + /* ld_so_xfer_auxv is the only function safe for virtual + executables being executed by valgrind's memcheck. Using + ld_so_xfer_auxv during inferior startup is problematic, because + ld.so symbol tables have not yet been relocated. So GDB uses + this function only when attaching to a process. */ if (current_inferior ()->attach_flag != 0) @@ -308,7 +315,7 @@ target_auxv_search (struct target_ops *ops, CORE_ADDR match, CORE_ADDR *valp) } -/* Print the contents of the target's AUXV on the specified file. */ +/* Print the contents of the target's AUXV on the specified file. */ int fprint_target_auxv (struct ui_file *file, struct target_ops *ops) { diff --git a/gdb/auxv.h b/gdb/auxv.h index 679bf17cec2..6a9f6982ff5 100644 --- a/gdb/auxv.h +++ b/gdb/auxv.h @@ -40,7 +40,7 @@ extern int target_auxv_parse (struct target_ops *ops, extern int target_auxv_search (struct target_ops *ops, CORE_ADDR match, CORE_ADDR *valp); -/* Print the contents of the target's AUXV on the specified file. */ +/* Print the contents of the target's AUXV on the specified file. */ extern int fprint_target_auxv (struct ui_file *file, struct target_ops *ops); extern LONGEST memory_xfer_auxv (struct target_ops *ops, diff --git a/gdb/ax-gdb.c b/gdb/ax-gdb.c index 4941d327167..42a6b81e9ca 100644 --- a/gdb/ax-gdb.c +++ b/gdb/ax-gdb.c @@ -59,7 +59,7 @@ -/* Prototypes for local functions. */ +/* Prototypes for local functions. */ /* There's a standard order to the arguments of these functions: union exp_element ** --- pointer into expression @@ -614,7 +614,7 @@ static void gen_var_ref (struct gdbarch *gdbarch, struct agent_expr *ax, struct axs_value *value, struct symbol *var) { - /* Dereference any typedefs. */ + /* Dereference any typedefs. */ value->type = check_typedef (SYMBOL_TYPE (var)); value->optimized_out = 0; @@ -986,7 +986,7 @@ gen_cast (struct agent_expr *ax, struct axs_value *value, struct type *type) /* GCC does allow casts to yield lvalues, so this should be fixed before merging these changes into the trunk. */ require_rvalue (ax, value); - /* Dereference typedefs. */ + /* Dereference typedefs. */ type = check_typedef (type); switch (TYPE_CODE (type)) @@ -1289,7 +1289,7 @@ gen_bitfield_ref (struct expression *exp, struct agent_expr *ax, equal to the number of `one' bits in bytesize, but who cares? */ int fragment_count; - /* Dereference any typedefs. */ + /* Dereference any typedefs. */ type = check_typedef (type); /* Can we fetch the number of bits requested at all? */ @@ -1677,7 +1677,7 @@ gen_aggregate_elt_ref (struct expression *exp, return 0; } -/* Generate code for GDB's magical `repeat' operator. +/* Generate code for GDB's magical `repeat' operator. LVALUE @ INT creates an array INT elements long, and whose elements have the same type as LVALUE, located in memory so that LVALUE is its first element. For example, argv[0]@argc gives you the array @@ -2049,7 +2049,7 @@ gen_expr (struct expression *exp, union exp_element **pc, case UNOP_PLUS: (*pc)++; - /* + FOO is equivalent to 0 + FOO, which can be optimized. */ + /* + FOO is equivalent to 0 + FOO, which can be optimized. */ gen_expr (exp, pc, ax, value); gen_usual_unary (exp, ax, value); break; diff --git a/gdb/ax-gdb.h b/gdb/ax-gdb.h index 924df0891a2..b7fe8be0b66 100644 --- a/gdb/ax-gdb.h +++ b/gdb/ax-gdb.h @@ -78,7 +78,7 @@ struct axs_value /* The type of the subexpression. Even if lvalue == axs_lvalue_memory, this is the type of the value itself; the value on the stack is a - "pointer to" an object of this type. */ + "pointer to" an object of this type. */ struct type *type; /* If nonzero, this is a variable which does not actually exist in diff --git a/gdb/ax-general.c b/gdb/ax-general.c index e1269e6ff10..fb35670c26b 100644 --- a/gdb/ax-general.c +++ b/gdb/ax-general.c @@ -248,7 +248,7 @@ ax_const_l (struct agent_expr *x, LONGEST l) break; } - /* Emit the right opcode... */ + /* Emit the right opcode... */ ax_simple (x, ops[op]); /* Emit the low SIZE bytes as an unsigned number. We know that diff --git a/gdb/breakpoint.h b/gdb/breakpoint.h index a044c6b3667..bfae8d97df0 100644 --- a/gdb/breakpoint.h +++ b/gdb/breakpoint.h @@ -28,24 +28,25 @@ struct value; struct block; struct breakpoint_object; -/* This is the maximum number of bytes a breakpoint instruction can take. - Feel free to increase it. It's just used in a few places to size - arrays that should be independent of the target architecture. */ +/* This is the maximum number of bytes a breakpoint instruction can + take. Feel free to increase it. It's just used in a few places to + size arrays that should be independent of the target + architecture. */ #define BREAKPOINT_MAX 16 /* Type of breakpoint. */ -/* FIXME In the future, we should fold all other breakpoint-like things into - here. This includes: +/* FIXME In the future, we should fold all other breakpoint-like + things into here. This includes: - * single-step (for machines where we have to simulate single stepping) - (probably, though perhaps it is better for it to look as much as - possible like a single-step to wait_for_inferior). */ + * single-step (for machines where we have to simulate single + stepping) (probably, though perhaps it is better for it to look as + much as possible like a single-step to wait_for_inferior). */ enum bptype { - bp_none = 0, /* Eventpoint has been deleted. */ + bp_none = 0, /* Eventpoint has been deleted */ bp_breakpoint, /* Normal breakpoint */ bp_hardware_breakpoint, /* Hardware assisted breakpoint */ bp_until, /* used by until command */ @@ -64,8 +65,9 @@ enum bptype exception will land. */ bp_exception_resume, - /* Used by wait_for_inferior for stepping over subroutine calls, for - stepping over signal handlers, and for skipping prologues. */ + /* Used by wait_for_inferior for stepping over subroutine calls, + for stepping over signal handlers, and for skipping + prologues. */ bp_step_resume, /* Used to detect when a watchpoint expression has gone out of @@ -83,12 +85,13 @@ enum bptype bp_watchpoint_scope, /* The breakpoint at the end of a call dummy. */ - /* FIXME: What if the function we are calling longjmp()s out of the - call, or the user gets out with the "return" command? We currently - have no way of cleaning up the breakpoint in these (obscure) situations. - (Probably can solve this by noticing longjmp, "return", etc., it's - similar to noticing when a watchpoint on a local variable goes out - of scope (with hardware support for watchpoints)). */ + /* FIXME: What if the function we are calling longjmp()s out of + the call, or the user gets out with the "return" command? We + currently have no way of cleaning up the breakpoint in these + (obscure) situations. (Probably can solve this by noticing + longjmp, "return", etc., it's similar to noticing when a + watchpoint on a local variable goes out of scope (with hardware + support for watchpoints)). */ bp_call_dummy, /* A breakpoint set on std::terminate, that is used to catch @@ -146,39 +149,46 @@ enum bptype bp_jit_event, }; -/* States of enablement of breakpoint. */ +/* States of enablement of breakpoint. */ enum enable_state { - bp_disabled, /* The eventpoint is inactive, and cannot trigger. */ - bp_enabled, /* The eventpoint is active, and can trigger. */ - bp_call_disabled, /* The eventpoint has been disabled while a call - into the inferior is "in flight", because some - eventpoints interfere with the implementation of - a call on some targets. The eventpoint will be - automatically enabled and reset when the call - "lands" (either completes, or stops at another - eventpoint). */ - bp_startup_disabled,/* The eventpoint has been disabled during inferior - startup. This is necessary on some targets where - the main executable will get relocated during - startup, making breakpoint addresses invalid. - The eventpoint will be automatically enabled and - reset once inferior startup is complete. */ - bp_permanent /* There is a breakpoint instruction hard-wired into - the target's code. Don't try to write another - breakpoint instruction on top of it, or restore - its value. Step over it using the architecture's - SKIP_INSN macro. */ + bp_disabled, /* The eventpoint is inactive, and cannot + trigger. */ + bp_enabled, /* The eventpoint is active, and can + trigger. */ + bp_call_disabled, /* The eventpoint has been disabled while a + call into the inferior is "in flight", + because some eventpoints interfere with + the implementation of a call on some + targets. The eventpoint will be + automatically enabled and reset when the + call "lands" (either completes, or stops + at another eventpoint). */ + bp_startup_disabled, /* The eventpoint has been disabled during + inferior startup. This is necessary on + some targets where the main executable + will get relocated during startup, making + breakpoint addresses invalid. The + eventpoint will be automatically enabled + and reset once inferior startup is + complete. */ + bp_permanent /* There is a breakpoint instruction + hard-wired into the target's code. Don't + try to write another breakpoint + instruction on top of it, or restore its + value. Step over it using the + architecture's SKIP_INSN macro. */ }; -/* Disposition of breakpoint. Ie: what to do after hitting it. */ +/* Disposition of breakpoint. Ie: what to do after hitting it. */ enum bpdisp { disp_del, /* Delete it */ - disp_del_at_next_stop, /* Delete at next stop, whether hit or not */ + disp_del_at_next_stop, /* Delete at next stop, + whether hit or not */ disp_disable, /* Disable it */ disp_donttouch /* Leave it alone */ }; @@ -216,11 +226,11 @@ struct bp_target_info int shadow_len; /* The size of the placed breakpoint, according to - gdbarch_breakpoint_from_pc, when the breakpoint was inserted. This is - generally the same as SHADOW_LEN, unless we did not need + gdbarch_breakpoint_from_pc, when the breakpoint was inserted. + This is generally the same as SHADOW_LEN, unless we did not need to read from the target to implement the memory breakpoint - (e.g. if a remote stub handled the details). We may still - need the size to remove the breakpoint safely. */ + (e.g. if a remote stub handled the details). We may still need + the size to remove the breakpoint safely. */ int placed_size; }; @@ -313,14 +323,16 @@ struct bp_location bp_loc_other. */ CORE_ADDR address; - /* For hardware watchpoints, the size of data ad ADDRESS being watches. */ + /* For hardware watchpoints, the size of data ad ADDRESS being + watches. */ int length; - /* Type of hardware watchpoint. */ + /* Type of hardware watchpoint. */ enum target_hw_bp_type watchpoint_type; /* For any breakpoint type with an address, this is the section - associated with the address. Used primarily for overlay debugging. */ + associated with the address. Used primarily for overlay + debugging. */ struct obj_section *section; /* Address at which breakpoint was requested, either by the user or @@ -374,11 +386,12 @@ struct breakpoint_ops hit it. */ enum print_stop_action (*print_it) (struct breakpoint *); - /* Display information about this breakpoint, for "info breakpoints". */ + /* Display information about this breakpoint, for "info + breakpoints". */ void (*print_one) (struct breakpoint *, struct bp_location **); - /* Display information about this breakpoint after setting it (roughly - speaking; this is called from "mention"). */ + /* Display information about this breakpoint after setting it + (roughly speaking; this is called from "mention"). */ void (*print_mention) (struct breakpoint *); /* Print to FP the CLI command that recreates this breakpoint. */ @@ -420,11 +433,11 @@ struct counted_command_line; struct breakpoint { struct breakpoint *next; - /* Type of breakpoint. */ + /* Type of breakpoint. */ enum bptype type; /* Zero means disabled; remember the info but don't break here. */ enum enable_state enable_state; - /* What to do with this breakpoint after we hit it. */ + /* What to do with this breakpoint after we hit it. */ enum bpdisp disposition; /* Number assigned to distinguish breakpoints. */ int number; @@ -441,12 +454,13 @@ struct breakpoint char *source_file; /* Non-zero means a silent breakpoint (don't print frame info - if we stop here). */ + if we stop here). */ unsigned char silent; /* Number of stops at this breakpoint that should be continued automatically before really stopping. */ int ignore_count; - /* Chain of command lines to execute when this breakpoint is hit. */ + /* Chain of command lines to execute when this breakpoint is + hit. */ struct counted_command_line *commands; /* Stack depth (address of frame). If nonzero, break only if fp equals this. */ @@ -463,11 +477,11 @@ struct breakpoint enum language language; /* Input radix we used to set the breakpoint. */ int input_radix; - /* String form of the breakpoint condition (malloc'd), or NULL if there - is no condition. */ + /* String form of the breakpoint condition (malloc'd), or NULL if + there is no condition. */ char *cond_string; - /* String form of exp to use for displaying to the user (malloc'd), or - NULL if none. */ + /* String form of exp to use for displaying to the user + (malloc'd), or NULL if none. */ char *exp_string; /* String form to use for reparsing of EXP (malloc'd) or NULL. */ char *exp_string_reparse; @@ -491,9 +505,10 @@ struct breakpoint int val_valid; /* Holds the address of the related watchpoint_scope breakpoint - when using watchpoints on local variables (might the concept - of a related breakpoint be useful elsewhere, if not just call - it the watchpoint_scope breakpoint or something like that. FIXME). */ + when using watchpoints on local variables (might the concept of + a related breakpoint be useful elsewhere, if not just call it + the watchpoint_scope breakpoint or something like that. + FIXME). */ struct breakpoint *related_breakpoint; /* Holds the frame address which identifies the frame this @@ -510,10 +525,12 @@ struct breakpoint hardware. */ enum watchpoint_triggered watchpoint_triggered; - /* Thread number for thread-specific breakpoint, or -1 if don't care. */ + /* Thread number for thread-specific breakpoint, + or -1 if don't care. */ int thread; - /* Ada task number for task-specific breakpoint, or 0 if don't care. */ + /* Ada task number for task-specific breakpoint, + or 0 if don't care. */ int task; /* Count of the number of times this breakpoint was taken, dumped @@ -532,10 +549,10 @@ struct breakpoint triggered. */ char *exec_pathname; - /* Syscall numbers used for the 'catch syscall' feature. - If no syscall has been specified for filtering, its value is NULL. - Otherwise, it holds a list of all syscalls to be caught. - The list elements are allocated with xmalloc. */ + /* Syscall numbers used for the 'catch syscall' feature. If no + syscall has been specified for filtering, its value is NULL. + Otherwise, it holds a list of all syscalls to be caught. The + list elements are allocated with xmalloc. */ VEC(int) *syscalls_to_be_caught; /* Methods associated with this breakpoint. */ @@ -621,15 +638,16 @@ enum bpstat_what_main_action BPSTAT_WHAT_KEEP_CHECKING, /* Remove breakpoints, single step once, then put them back in and - go back to what we were doing. It's possible that this should be - removed from the main_action and put into a separate field, to more - cleanly handle BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE. */ + go back to what we were doing. It's possible that this should + be removed from the main_action and put into a separate field, + to more cleanly handle + BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE. */ BPSTAT_WHAT_SINGLE, /* Set longjmp_resume breakpoint, remove all other breakpoints, - and continue. The "remove all other breakpoints" part is required - if we are also stepping over another breakpoint as well as doing - the longjmp handling. */ + and continue. The "remove all other breakpoints" part is + required if we are also stepping over another breakpoint as + well as doing the longjmp handling. */ BPSTAT_WHAT_SET_LONGJMP_RESUME, /* Clear longjmp_resume breakpoint, then handle as @@ -639,8 +657,8 @@ enum bpstat_what_main_action /* Rather than distinguish between noisy and silent stops here, it might be cleaner to have bpstat_print make that decision (also taking into account stop_print_frame and source_only). But the - implications are a bit scary (interaction with auto-displays, etc.), - so I won't try it. */ + implications are a bit scary (interaction with auto-displays, + etc.), so I won't try it. */ /* Stop silently. */ BPSTAT_WHAT_STOP_SILENT, @@ -670,10 +688,10 @@ struct bpstat_what { enum bpstat_what_main_action main_action; - /* Did we hit a call dummy breakpoint? This only goes with a main_action - of BPSTAT_WHAT_STOP_SILENT or BPSTAT_WHAT_STOP_NOISY (the concept of - continuing from a call dummy without popping the frame is not a - useful one). */ + /* Did we hit a call dummy breakpoint? This only goes with a + main_action of BPSTAT_WHAT_STOP_SILENT or + BPSTAT_WHAT_STOP_NOISY (the concept of continuing from a call + dummy without popping the frame is not a useful one). */ enum stop_stack_kind call_dummy; /* Used for BPSTAT_WHAT_SET_LONGJMP_RESUME and @@ -683,7 +701,7 @@ struct bpstat_what }; /* The possible return values for print_bpstat, print_it_normal, - print_it_done, print_it_noop. */ + print_it_done, print_it_noop. */ enum print_stop_action { PRINT_UNKNOWN = -1, @@ -695,7 +713,7 @@ enum print_stop_action /* Tell what to do about this bpstat. */ struct bpstat_what bpstat_what (bpstat); -/* Find the bpstat associated with a breakpoint. NULL otherwise. */ +/* Find the bpstat associated with a breakpoint. NULL otherwise. */ bpstat bpstat_find_breakpoint (bpstat, struct breakpoint *); /* Nonzero if a signal that we got in wait() was due to circumstances @@ -717,10 +735,11 @@ extern int bpstat_should_step (void); return means print the frame as well as the source line). */ extern enum print_stop_action bpstat_print (bpstat); -/* Put in *NUM the breakpoint number of the first breakpoint we are stopped - at. *BSP upon return is a bpstat which points to the remaining - breakpoints stopped at (but which is not guaranteed to be good for - anything but further calls to bpstat_num). +/* Put in *NUM the breakpoint number of the first breakpoint we are + stopped at. *BSP upon return is a bpstat which points to the + remaining breakpoints stopped at (but which is not guaranteed to be + good for anything but further calls to bpstat_num). + Return 0 if passed a bpstat which does not indicate any breakpoints. Return -1 if stopped at a breakpoint that has been deleted since we set it. @@ -738,15 +757,17 @@ extern void bpstat_clear_actions (bpstat); /* Implementation: */ -/* Values used to tell the printing routine how to behave for this bpstat. */ +/* Values used to tell the printing routine how to behave for this + bpstat. */ enum bp_print_how { /* This is used when we want to do a normal printing of the reason - for stopping. The output will depend on the type of eventpoint - we are dealing with. This is the default value, most commonly - used. */ + for stopping. The output will depend on the type of eventpoint + we are dealing with. This is the default value, most commonly + used. */ print_it_normal, - /* This is used when nothing should be printed for this bpstat entry. */ + /* This is used when nothing should be printed for this bpstat + entry. */ print_it_noop, /* This is used when everything which needs to be printed has already been printed. But we still want to print the frame. */ @@ -824,15 +845,18 @@ enum breakpoint_here /* Prototypes for breakpoint-related functions. */ -extern enum breakpoint_here breakpoint_here_p (struct address_space *, CORE_ADDR); +extern enum breakpoint_here breakpoint_here_p (struct address_space *, + CORE_ADDR); extern int moribund_breakpoint_here_p (struct address_space *, CORE_ADDR); extern int breakpoint_inserted_here_p (struct address_space *, CORE_ADDR); -extern int regular_breakpoint_inserted_here_p (struct address_space *, CORE_ADDR); +extern int regular_breakpoint_inserted_here_p (struct address_space *, + CORE_ADDR); -extern int software_breakpoint_inserted_here_p (struct address_space *, CORE_ADDR); +extern int software_breakpoint_inserted_here_p (struct address_space *, + CORE_ADDR); /* Returns true if there's a hardware watchpoint or access watchpoint inserted in the range defined by ADDR and LEN. */ @@ -840,7 +864,8 @@ extern int hardware_watchpoint_inserted_in_range (struct address_space *, CORE_ADDR addr, ULONGEST len); -extern int breakpoint_thread_match (struct address_space *, CORE_ADDR, ptid_t); +extern int breakpoint_thread_match (struct address_space *, + CORE_ADDR, ptid_t); extern void until_break_command (char *, int, int); @@ -902,9 +927,9 @@ extern int remove_breakpoints_pid (int pid); /* This function can be used to physically insert eventpoints from the specified traced inferior process, without modifying the breakpoint - package's state. This can be useful for those targets which support - following the processes of a fork() or vfork() system call, when both - of the resulting two processes are to be followed. */ + package's state. This can be useful for those targets which + support following the processes of a fork() or vfork() system call, + when both of the resulting two processes are to be followed. */ extern int reattach_breakpoints (int); /* This function can be used to update the breakpoint package's state @@ -921,7 +946,7 @@ extern int reattach_breakpoints (int); - A step-resume breakpoint, if any, is explicitly removed from the breakpoint list. - All eventpoints without a symbolic address are removed from the - breakpoint list. */ + breakpoint list. */ extern void update_breakpoints_after_exec (void); /* This function can be used to physically remove hardware breakpoints @@ -989,7 +1014,8 @@ extern void disable_breakpoints_before_startup (void); extern void enable_breakpoints_after_startup (void); /* For script interpreters that need to define breakpoint commands - after they've already read the commands into a struct command_line. */ + after they've already read the commands into a struct + command_line. */ extern enum command_control_type commands_from_control_command (char *arg, struct command_line *cmd); @@ -1001,8 +1027,8 @@ extern int get_number_or_range (char **); extern struct breakpoint *get_breakpoint (int num); -/* The following are for displays, which aren't really breakpoints, but - here is as good a place as any for them. */ +/* The following are for displays, which aren't really breakpoints, + but here is as good a place as any for them. */ extern void disable_current_display (void); @@ -1039,21 +1065,22 @@ extern void remove_thread_event_breakpoints (void); extern void disable_breakpoints_in_shlibs (void); -/* This function returns TRUE if ep is a catchpoint. */ +/* This function returns TRUE if ep is a catchpoint. */ extern int ep_is_catchpoint (struct breakpoint *); /* Enable breakpoints and delete when hit. Called with ARG == NULL - deletes all breakpoints. */ + deletes all breakpoints. */ extern void delete_command (char *arg, int from_tty); -/* Pull all H/W watchpoints from the target. Return non-zero if the - remove fails. */ +/* Pull all H/W watchpoints from the target. Return non-zero if the + remove fails. */ extern int remove_hw_watchpoints (void); -/* Manage a software single step breakpoint (or two). Insert may be called - twice before remove is called. */ +/* Manage a software single step breakpoint (or two). Insert may be + called twice before remove is called. */ extern void insert_single_step_breakpoint (struct gdbarch *, - struct address_space *, CORE_ADDR); + struct address_space *, + CORE_ADDR); extern int single_step_breakpoints_inserted (void); extern void remove_single_step_breakpoints (void); extern void cancel_single_step_breakpoints (void); @@ -1062,7 +1089,8 @@ extern void cancel_single_step_breakpoints (void); breakpoints. These functions are used in murky target-specific ways. Please do not add more uses! */ extern void *deprecated_insert_raw_breakpoint (struct gdbarch *, - struct address_space *, CORE_ADDR); + struct address_space *, + CORE_ADDR); extern int deprecated_remove_raw_breakpoint (struct gdbarch *, void *); /* Check if any hardware watchpoints have triggered, according to the @@ -1103,7 +1131,8 @@ extern struct breakpoint *get_tracepoint (int num); extern struct breakpoint *get_tracepoint_by_number_on_target (int num); /* Find a tracepoint by parsing a number in the supplied string. */ -extern struct breakpoint *get_tracepoint_by_number (char **arg, int multi_p, +extern struct breakpoint *get_tracepoint_by_number (char **arg, + int multi_p, int optional_p); /* Return a vector of all tracepoints currently defined. The vector diff --git a/gdb/buildsym.h b/gdb/buildsym.h index 99897fdcd91..c5d98410e6b 100644 --- a/gdb/buildsym.h +++ b/gdb/buildsym.h @@ -44,11 +44,11 @@ struct block; #endif #define HASHSIZE 127 /* Size of things hashed via - hashname() */ + hashname(). */ /* Name of source file whose symbol data we are now processing. This - comes from a symbol of type N_SO for stabs. For Dwarf it comes from the - DW_AT_name attribute of a DW_TAG_compile_unit DIE. */ + comes from a symbol of type N_SO for stabs. For Dwarf it comes + from the DW_AT_name attribute of a DW_TAG_compile_unit DIE. */ EXTERN char *last_source_file; @@ -158,7 +158,7 @@ struct context_stack CORE_ADDR start_addr; - /* Temp slot for exception handling. */ + /* Temp slot for exception handling. */ CORE_ADDR end_addr; @@ -198,7 +198,7 @@ struct pending_block /* Pointer to the head of a linked list of symbol blocks which have already been finalized (lexical contexts already closed) and which are just waiting to be built into a blockvector when finalizing the - associated symtab. */ + associated symtab. */ EXTERN struct pending_block *pending_blocks; @@ -213,7 +213,7 @@ EXTERN struct subfile_stack *subfile_stack; #define next_symbol_text(objfile) (*next_symbol_text_func)(objfile) -/* Function to invoke get the next symbol. Return the symbol name. */ +/* Function to invoke get the next symbol. Return the symbol name. */ EXTERN char *(*next_symbol_text_func) (struct objfile *); @@ -286,7 +286,7 @@ extern void free_pending_blocks (void); /* FIXME: Note that this is used only in buildsym.c and dstread.c, which should be fixed to not need direct access to - record_pending_block. */ + record_pending_block. */ extern void record_pending_block (struct objfile *objfile, struct block *block, @@ -300,7 +300,8 @@ extern void merge_symbol_lists (struct pending **srclist, struct pending **targetlist); /* The macro table for the compilation unit whose symbols we're - currently reading. All the symtabs for this CU will point to this. */ + currently reading. All the symtabs for this CU will point to + this. */ EXTERN struct macro_table *pending_macros; #undef EXTERN |