diff options
Diffstat (limited to 'gdb/config/pa/tm-hppa.h')
| -rw-r--r-- | gdb/config/pa/tm-hppa.h | 139 |
1 files changed, 7 insertions, 132 deletions
diff --git a/gdb/config/pa/tm-hppa.h b/gdb/config/pa/tm-hppa.h index d1b35551546..1a78c6ceb6f 100644 --- a/gdb/config/pa/tm-hppa.h +++ b/gdb/config/pa/tm-hppa.h @@ -1,6 +1,8 @@ /* Parameters for execution on any Hewlett-Packard PA-RISC machine. - Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, - 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. + + Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, + 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software + Foundation, Inc. Contributed by the Center for Software Science at the University of Utah (pa-gdb-bugs@cs.utah.edu). @@ -24,19 +26,10 @@ #include "regcache.h" -/* Wonder if this is correct? Should be using push_dummy_call(). */ -#define DEPRECATED_DUMMY_WRITE_SP(SP) deprecated_write_sp (SP) - #define GDB_MULTI_ARCH 1 -/* NOTE: cagney/2002-11-24: This is a guess. */ -#define DEPRECATED_USE_GENERIC_DUMMY_FRAMES 0 -#define CALL_DUMMY_LOCATION ON_STACK -#define DEPRECATED_PC_IN_CALL_DUMMY(pc, sp, frame_address) deprecated_pc_in_call_dummy_on_stack (pc, sp, frame_address) /* Hack, get around problem with including "arch-utils.h". */ struct frame_info; -extern CORE_ADDR init_frame_pc_default (int fromleaf, struct frame_info *prev); -#define DEPRECATED_INIT_FRAME_PC(l,f) (init_frame_pc_default (l, f)) /* Forward declarations of some types we use in prototypes */ @@ -66,6 +59,8 @@ extern int hppa_pc_requires_run_before_use (CORE_ADDR pc); other r registers. */ #define FLAGS_REGNUM 0 /* Various status flags */ #define RP_REGNUM 2 /* return pointer */ +#define HPPA_FP_REGNUM 3 /* The ABI's frame pointer, when used */ +#define HPPA_SP_REGNUM 30 /* Stack pointer. */ #define SAR_REGNUM 32 /* Shift Amount Register */ #define IPSW_REGNUM 41 /* Interrupt Processor Status Word */ #define PCOQ_HEAD_REGNUM 33 /* instruction offset queue head */ @@ -80,6 +75,7 @@ extern int hppa_pc_requires_run_before_use (CORE_ADDR pc); #define CCR_REGNUM 54 /* Coprocessor Configuration Register */ #define TR0_REGNUM 57 /* Temporary Registers (cr24 -> cr31) */ #define CR27_REGNUM 60 /* Base register for thread-local storage, cr27 */ +#define HPPA_FP0_REGNUM 64 /* First floating-point. */ #define FP4_REGNUM 72 #define ARG0_REGNUM 26 /* The first argument of a callee. */ @@ -97,137 +93,16 @@ extern int hppa_pc_requires_run_before_use (CORE_ADDR pc); (buf)[sizeof(CORE_ADDR) -1] &= ~0x3; \ } while (0) -/* Define DEPRECATED_DO_REGISTERS_INFO() to do machine-specific - formatting of register dumps. */ - -#define DEPRECATED_DO_REGISTERS_INFO(_regnum, fp) pa_do_registers_info (_regnum, fp) -extern void pa_do_registers_info (int, int); - /* PA specific macro to see if the current instruction is nullified. */ #ifndef INSTRUCTION_NULLIFIED extern int hppa_instruction_nullified (void); #define INSTRUCTION_NULLIFIED hppa_instruction_nullified () #endif -/* elz: Return a large value, which is stored on the stack at addr. - This is defined only for the hppa, at this moment. The above macro - DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS is not called anymore, - because it assumes that on exit from a called function which - returns a large structure on the stack, the address of the ret - structure is still in register 28. Unfortunately this register is - usually overwritten by the called function itself, on hppa. This is - specified in the calling convention doc. As far as I know, the only - way to get the return value is to have the caller tell us where it - told the callee to put it, rather than have the callee tell us. */ -struct value *hppa_value_returned_from_stack (register struct type *valtype, - CORE_ADDR addr); -#define VALUE_RETURNED_FROM_STACK(valtype,addr) \ - hppa_value_returned_from_stack (valtype, addr) - -extern void hppa_frame_init_saved_regs (struct frame_info *); -#define DEPRECATED_FRAME_INIT_SAVED_REGS(FI) \ - hppa_frame_init_saved_regs (FI) - #define INSTRUCTION_SIZE 4 -/* This sequence of words is the instructions - - ; Call stack frame has already been built by gdb. Since we could be calling - ; a varargs function, and we do not have the benefit of a stub to put things in - ; the right place, we load the first 4 word of arguments into both the general - ; and fp registers. - call_dummy - ldw -36(sp), arg0 - ldw -40(sp), arg1 - ldw -44(sp), arg2 - ldw -48(sp), arg3 - ldo -36(sp), r1 - fldws 0(0, r1), fr4 - fldds -4(0, r1), fr5 - fldws -8(0, r1), fr6 - fldds -12(0, r1), fr7 - ldil 0, r22 ; FUNC_LDIL_OFFSET must point here - ldo 0(r22), r22 ; FUNC_LDO_OFFSET must point here - ldsid (0,r22), r4 - ldil 0, r1 ; SR4EXPORT_LDIL_OFFSET must point here - ldo 0(r1), r1 ; SR4EXPORT_LDO_OFFSET must point here - ldsid (0,r1), r20 - combt,=,n r4, r20, text_space ; If target is in data space, do a - ble 0(sr5, r22) ; "normal" procedure call - copy r31, r2 - break 4, 8 - mtsp r21, sr0 - ble,n 0(sr0, r22) - text_space ; Otherwise, go through _sr4export, - ble (sr4, r1) ; which will return back here. - stw r31,-24(r30) - break 4, 8 - mtsp r21, sr0 - ble,n 0(sr0, r22) - nop ; To avoid kernel bugs - nop ; and keep the dummy 8 byte aligned - - The dummy decides if the target is in text space or data space. If - it's in data space, there's no problem because the target can - return back to the dummy. However, if the target is in text space, - the dummy calls the secret, undocumented routine _sr4export, which - calls a function in text space and can return to any space. Instead - of including fake instructions to represent saved registers, we - know that the frame is associated with the call dummy and treat it - specially. - - The trailing NOPs are needed to avoid a bug in HPUX, BSD and OSF1 - kernels. If the memory at the location pointed to by the PC is - 0xffffffff then a ptrace step call will fail (even if the instruction - is nullified). - - The code to pop a dummy frame single steps three instructions - starting with the last mtsp. This includes the nullified "instruction" - following the ble (which is uninitialized junk). If the - "instruction" following the last BLE is 0xffffffff, then the ptrace - will fail and the dummy frame is not correctly popped. - - By placing a NOP in the delay slot of the BLE instruction we can be - sure that we never try to execute a 0xffffffff instruction and - avoid the kernel bug. The second NOP is needed to keep the call - dummy 8 byte aligned. */ - -#define CALL_DUMMY {0x4BDA3FB9, 0x4BD93FB1, 0x4BD83FA9, 0x4BD73FA1,\ - 0x37C13FB9, 0x24201004, 0x2C391005, 0x24311006,\ - 0x2C291007, 0x22C00000, 0x36D60000, 0x02C010A4,\ - 0x20200000, 0x34210000, 0x002010b4, 0x82842022,\ - 0xe6c06000, 0x081f0242, 0x00010004, 0x00151820,\ - 0xe6c00002, 0xe4202000, 0x6bdf3fd1, 0x00010004,\ - 0x00151820, 0xe6c00002, 0x08000240, 0x08000240} - #define REG_PARM_STACK_SPACE 16 -/* If we've reached a trap instruction within the call dummy, then - we'll consider that to mean that we've reached the call dummy's - end after its successful completion. */ -#define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \ - (DEPRECATED_PC_IN_CALL_DUMMY((pc), (sp), (frame_address)) && \ - (read_memory_integer((pc), 4) == BREAKPOINT32)) - -/* Insert the specified number of args and function address into a - call sequence of the above form stored at DUMMYNAME. - - On the hppa we need to call the stack dummy through $$dyncall. - Therefore our version of DEPRECATED_FIX_CALL_DUMMY takes an extra - argument, real_pc, which is the location where gdb should start up - the inferior to do the function call. */ - -/* FIXME: brobecker 2002-12-26. This macro is going to cause us some - problems before we can go to multiarch partial as it has been - diverted on HPUX to return the value of the PC! */ -/* NOTE: cagney/2003-05-03: This has been replaced by push_dummy_code. - Hopefully that has all the parameters HP/UX needs. */ -#define DEPRECATED_FIX_CALL_DUMMY hppa_fix_call_dummy -extern CORE_ADDR hppa_fix_call_dummy (char *, CORE_ADDR, CORE_ADDR, int, - struct value **, struct type *, int); - -#define GDB_TARGET_IS_HPPA - /* * Unwind table and descriptor. */ |