diff options
Diffstat (limited to 'itcl/itk/win/configure.in')
-rw-r--r-- | itcl/itk/win/configure.in | 630 |
1 files changed, 0 insertions, 630 deletions
diff --git a/itcl/itk/win/configure.in b/itcl/itk/win/configure.in deleted file mode 100644 index 42beccee3ca..00000000000 --- a/itcl/itk/win/configure.in +++ /dev/null @@ -1,630 +0,0 @@ -dnl This file is an input file used by the GNU "autoconf" program to -dnl generate the file "configure", which is run during Tk installation -dnl to configure the system for the local environment. - -AC_PREREQ(2.5) - -AC_INIT(../generic/itk.h) - -AC_CONFIG_AUX_DIR(../../../) -AC_CANONICAL_HOST - -AC_PROG_RANLIB - -AC_PROG_CC -AC_OBJEXT -AC_CHECK_TOOL(NM, nm, nm) -AC_SUBST(NM) -AC_CHECK_TOOL(AS, as, as) -AC_SUBST(AS) -AC_CHECK_TOOL(LD, ld, ld) -AC_SUBST(LD) -AC_CHECK_TOOL(DLLTOOL, dlltool, dlltool) -AC_SUBST(DLLTOOL) -AC_CHECK_TOOL(WINDRES, windres, windres) -AC_SUBST(WINDRES) - -AC_PROG_INSTALL - -# needed for the subtle differences between cygwin and mingw32 -case "${host}" in -*-*-cygwin*) - DLL_LDLIBS=-lcygwin - DLL_LDFLAGS='-nostartfiles -Wl,--dll' - ;; -*-*-mingw32*) - DLL_LDLIBS= - DLL_LDFLAGS='-mdll' - ;; -esac -AC_SUBST(DLL_LDFLAGS) -AC_SUBST(DLL_LDLIBS) - -ITCL_VERSION=3.0 -ITCL_MAJOR_VERSION=3 -ITCL_MINOR_VERSION=0 -VERSION=${ITCL_MAJOR_VERSION}${ITCL_MINOR_VERSION} - -if test "${prefix}" = "NONE"; then - prefix=/usr/local -fi -if test "${exec_prefix}" = "NONE"; then - exec_prefix=$prefix -fi - -# ----------------------------------------------------------------------- -# Set up a new default --prefix. If a previous installation of -# [incr Tcl] can be found searching $PATH use that directory. -# ----------------------------------------------------------------------- - -AC_PREFIX_DEFAULT(/usr/local) -AC_PREFIX_PROGRAM(itclsh) - -# ----------------------------------------------------------------------- -BUILD_DIR=`pwd` -ITK_SRC_DIR=`cd $srcdir/..; pwd` - -if ! test "$GCC" = yes; then - tmp="`cygpath --windows $ITK_SRC_DIR`" - ITK_SRC_DIR="`echo $tmp | sed -e s#\\\\\\\\#/#g`" -fi - -cd ${BUILD_DIR} - -AC_ARG_ENABLE(gcc, [ --enable-gcc allow use of gcc if available], - [itk_ok=$enableval], [itk_ok=no]) -if test "$itk_ok" = "yes"; then - AC_PROG_CC -else - CC=${CC-cc} -AC_SUBST(CC) -fi -AC_HAVE_HEADERS(unistd.h limits.h) - - -#-------------------------------------------------------------------- -# See if there was a command-line option for where Tcl is; if -# not, assume that its top-level directory is a sibling of ours. -# CYGNUS LOCAL - Actually Tcl & Tk are siblings of the itcl directory -# that contains itcl & itk & iwidgets. -#-------------------------------------------------------------------- - -AC_ARG_WITH(tcl, [ --with-tcl=DIR use Tcl 8.0 binaries from DIR], - TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd ../../../tcl/win; pwd`) - -if test ! -f $TCL_BIN_DIR/../unix/tclConfig.sh; then - TCL_BIN_DIR=`cd ../../../tcl8.1/win;pwd` -fi - -if test ! -f $TCL_BIN_DIR/../unix/tclConfig.sh; then - AC_MSG_ERROR(There's no tclConfig.sh in $TCL_BIN_DIR; perhaps you didn't specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?) -fi - -#-------------------------------------------------------------------- -# Read in configuration information generated by Tcl for shared -# libraries, and arrange for it to be substituted into our -# Makefile. -#-------------------------------------------------------------------- - -file=$TCL_BIN_DIR/../unix/tclConfig.sh -. $file - -dnl CFLAGS=$TCL_CFLAGS - -SHLIB_CFLAGS=$TCL_SHLIB_CFLAGS -SHLIB_LD=$TCL_SHLIB_LD -SHLIB_LD_LIBS=$TCL_SHLIB_LD_LIBS -SHLIB_SUFFIX=$TCL_SHLIB_SUFFIX -SHLIB_VERSION=$TCL_SHLIB_VERSION -DL_LIBS=$TCL_DL_LIBS -LD_FLAGS=$TCL_LD_FLAGS -ITK_LD_SEARCH_FLAGS=$TCL_LD_SEARCH_FLAGS - -#-------------------------------------------------------------------- -# See if there was a command-line option for where Tk is; if -# not, assume that its top-level directory is a sibling of ours. -# CYGNUS LOCAL - actually these are one level higher in the CYGNUS tree. -#-------------------------------------------------------------------- - -AC_ARG_WITH(tcl, [ --with-tk=DIR use Tk 8.0 binaries from DIR], - TK_BIN_DIR=$withval, TK_BIN_DIR=`cd ../../../tk/win; pwd`) - -if test ! -f $TK_BIN_DIR/../unix/tkConfig.sh; then - TK_BIN_DIR=`cd ../../../tk8.1/win;pwd` -fi - -if test ! -f $TK_BIN_DIR/../unix/tkConfig.sh; then - AC_MSG_ERROR(There's no tkConfig.sh in $TK_BIN_DIR; perhaps you didn't specify the Tk *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?) -fi - -file=$TK_BIN_DIR/../unix/tkConfig.sh -. $file - -if ! test "$GCC" = yes; then - tmp="`cygpath --windows $TK_BIN_DIR`" - TK_BIN_DIR="`echo $tmp | sed -e s#\\\\\\\\#/#g`" -fi - - -#-------------------------------------------------------------------- -# See if there was a command-line option for where [incr Tcl] is. -# If not, assume that its top-level directory is a sibling of ours. -#-------------------------------------------------------------------- - -AC_ARG_WITH(itcl, [ --with-itcl=DIR use Itcl 3.0 binaries from DIR], - ITCL_BIN_DIR=$withval, ITCL_BIN_DIR=`cd ../../itcl/win; pwd`) -if test ! -d $ITCL_BIN_DIR; then - AC_MSG_ERROR(Itcl directory $ITCL_BIN_DIR doesn't exist) -fi -if test ! -f $ITCL_BIN_DIR/Makefile; then - AC_MSG_ERROR(There's no Makefile in $ITCL_BIN_DIR; perhaps you didn't specify the Itcl *build* directory (not the toplevel Itcl directory) or you forgot to configure Itcl?) -fi - -file=$ITCL_BIN_DIR/../itclConfig.sh -. $file - - -AC_MSG_CHECKING([whether C compiler is gcc]) -AC_CACHE_VAL(itcl_cv_prog_gcc, [ - AC_EGREP_CPP(_cc_is_gcc_, [ -#ifdef __GNUC__ -_cc_is_gcc_ -#endif -], [itcl_cv_prog_gcc=yes], [itcl_cv_prog_gcc=no])]) -AC_MSG_RESULT([$itcl_cv_prog_gcc]) - -if test -z "$CFLAGS" ; then - CFLAGS="-O" -fi -if test "$itcl_cv_prog_gcc" = "yes" ; then - CFLAGS="$CFLAGS -Wshadow -Wtraditional -Wall" -fi - -AC_MSG_CHECKING([default compiler flags]) -AC_ARG_WITH(cflags, [ --with-cflags=FLAGS set compiler flags to FLAGS], - [CFLAGS="$with_cflags"]) - -AC_MSG_RESULT([$CFLAGS]) - -#-------------------------------------------------------------------- -# Supply a substitute for stdlib.h if it doesn't define strtol, -# strtoul, or strtod (which it doesn't in some versions of SunOS). -#-------------------------------------------------------------------- - -AC_MSG_CHECKING(stdlib.h) -AC_HEADER_EGREP(strtol, stdlib.h, itk_ok=yes, itk_ok=no) -AC_HEADER_EGREP(strtoul, stdlib.h, , itk_ok=no) -AC_HEADER_EGREP(strtod, stdlib.h, , itk_ok=no) -if test $itk_ok = no; then - AC_DEFINE(NO_STDLIB_H) -fi -AC_MSG_RESULT($itk_ok) - -#-------------------------------------------------------------------- -# Check for various typedefs and provide substitutes if -# they don't exist. -#-------------------------------------------------------------------- - -AC_MODE_T -AC_PID_T -AC_SIZE_T -AC_UID_T - -# ----------------------------------------------------------------------- -# C compiler and debugging flags -# ----------------------------------------------------------------------- -AC_MSG_CHECKING([which C compiler]) -if test -z "$CC" ; then - CC="cc" -fi -AC_ARG_WITH(cc, [ --with-cc=CC set C compiler to CC], - [CC=$with_cc]) -AC_MSG_RESULT([$CC]) -AC_SUBST(CC) - -AC_PROG_CPP - -#-------------------------------------------------------------------- -# Supply substitutes for missing POSIX header files. -# Replacements are handled in "tclInt.h" which we include here. -#-------------------------------------------------------------------- - -AC_CHECK_HEADER(limits.h, , AC_DEFINE(NO_LIMITS_H)) -AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) -AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) -AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) -AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) -if test $tcl_ok = 0; then - AC_DEFINE(NO_STDLIB_H) -fi -AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) -AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) -AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) -if test $tcl_ok = 0; then - AC_DEFINE(NO_STRING_H) -fi - -#-------------------------------------------------------------------- -# Check for various typedefs and provide substitutes if -# they don't exist. -#-------------------------------------------------------------------- - -AC_MODE_T -AC_PID_T -AC_SIZE_T -AC_UID_T - -#-------------------------------------------------------------------- -# Locate the X11 header files and the X11 library archive. Try -# the ac_path_x macro first, but if it doesn't find the X stuff -# (e.g. because there's no xmkmf program) then check through -# a list of possible directories. Under some conditions the -# autoconf macro will return an include directory that contains -# no include files, so double-check its result just to be safe. -#-------------------------------------------------------------------- - -AC_PATH_X -not_really_there="" -if test "$no_x" = ""; then - if test "$x_includes" = ""; then - AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes") - else - if test ! -r $x_includes/X11/Intrinsic.h; then - not_really_there="yes" - fi - fi -fi -if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then - echo checking for X11 header files - XINCLUDES="# no special path needed" - AC_TRY_CPP([#include <X11/Intrinsic.h>], , XINCLUDES="nope") - if test "$XINCLUDES" = nope; then - dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/include/X11R6 /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" - for i in $dirs ; do - if test -r $i/X11/Intrinsic.h; then - XINCLUDES=" -I$i" - fi - done - fi -else - if test "$x_includes" != ""; then - XINCLUDES=-I$x_includes - else - XINCLUDES="# no special path needed" - fi -fi -if test "$XINCLUDES" = nope; then - echo "Warning: couldn't find any X11 include files." - XINCLUDES="# no include files found" -fi -AC_SUBST(XINCLUDES) - -if test "$no_x" = yes; then - XLIBSW=nope - if test "$XLIBSW" = nope; then - dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/lib/X11R6 /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" - for i in $dirs ; do - if test -r $i/libX11.a; then - XLIBSW="-L$i -lX11" - fi - done - fi -else - if test "$x_libraries" = ""; then - XLIBSW=-lX11 - else - XLIBSW="-L$x_libraries -lX11" - fi -fi -if test "$XLIBSW" = nope ; then - AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) -fi -if test "$XLIBSW" = nope ; then - AC_MSG_RESULT(couldn't find any! Using -lX11.) - XLIBSW=-lX11 -fi - -#-------------------------------------------------------------------- -# If the X library binaries are in a non-standard directory, and -# if a mechanism such as -R is available on this platform for -# specifying a runtime search path for shared libraries, add the X -# library location into that search path. -#-------------------------------------------------------------------- - -if test "$x_libraries" != "" -a "$ITK_LD_SEARCH_FLAGS" != ""; then - itk_tmp=`sed -e "s|\\\${LIB_RUNTIME_DIR}|$x_libraries|" << EOF -$ITK_LD_SEARCH_FLAGS -EOF` - ITK_LD_SEARCH_FLAGS="$ITK_LD_SEARCH_FLAGS $itk_tmp" -fi - -#-------------------------------------------------------------------- -# Check for the existence of various libraries. The order here -# is important, so that then end up in the right order in the -# command line generated by make. The -lsocket and -lnsl libraries -# require a couple of special tricks: -# 1. Use "connect" and "accept" to check for -lsocket, and -# "gethostbyname" to check for -lnsl. -# 2. Use each function name only once: can't redo a check because -# autoconf caches the results of the last check and won't redo it. -# 3. Use -lnsl and -lsocket only if they supply procedures that -# aren't already present in the normal libraries. This is because -# IRIX 5.2 has libraries, but they aren't needed and they're -# bogus: they goof up name resolution if used. -# 4. On some SVR4 systems, can't use -lsocket without -lnsl too. -# To get around this problem, check for both libraries together -# if -lsocket doesn't work by itself. -#-------------------------------------------------------------------- - -AC_CHECK_LIB(Xbsd, main, [LIBS="$LIBS -lXbsd"]) - -itk_checkBoth=0 -AC_CHECK_FUNC(connect, itk_checkSocket=0, itk_checkSocket=1) -if test "$itk_checkSocket" = 1; then - AC_CHECK_LIB(socket, main, LIBS="$LIBS -lsocket", itk_checkBoth=1) -fi -if test "$itk_checkBoth" = 1; then - itk_oldLibs=$LIBS - LIBS="$LIBS -lsocket -lnsl" - AC_CHECK_FUNC(accept, itk_checkNsl=0, [LIBS=$itk_oldLibs]) -fi -AC_CHECK_FUNC(gethostbyname, , AC_CHECK_LIB(nsl, main, [LIBS="$LIBS -lnsl"])) - -#-------------------------------------------------------------------- -# One more check related to the X libraries. The standard releases -# of Ultrix don't support the "xauth" mechanism, so send won't work -# unless TK_NO_SECURITY is defined. However, there are usually copies -# of the MIT X server available as well, which do support xauth. -# Check for the MIT stuff and use it if it exists. -# -# Note: can't use ac_check_lib macro (at least, not in Autoconf 2.1) -# because it can't deal with the "-" in the library name. -#-------------------------------------------------------------------- - -if test -d /usr/include/mit ; then - AC_MSG_CHECKING([MIT X libraries]) - itk_oldCFlags=$CFLAGS - CFLAGS="$CFLAGS -I/usr/include/mit" - itk_oldLibs=$LIBS - LIBS="$LIBS -lX11-mit" - AC_TRY_LINK([ - #include <X11/Xlib.h> - ], [ - XOpenDisplay(0); - ], [ - AC_MSG_RESULT(yes) - XLIBSW="-lX11-mit" - XINCLUDES="-I/usr/include/mit" - ], AC_MSG_RESULT(no)) - CFLAGS=$itk_oldCFlags - LIBS=$itk_oldLibs -fi - -#-------------------------------------------------------------------- -# On a few very rare systems, all of the libm.a stuff is -# already in libc.a. Set compiler flags accordingly. -# Also, Linux requires the "ieee" library for math to -# work right (and it must appear before "-lm"). -#-------------------------------------------------------------------- - -MATH_LIBS="" -AC_CHECK_FUNC(sin, , MATH_LIBS="-lm") -AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) - -#-------------------------------------------------------------------- -# If this system doesn't have a memmove procedure, use memcpy -# instead. -#-------------------------------------------------------------------- - -AC_CHECK_FUNC(memmove, , [AC_DEFINE(memmove, memcpy)]) - -#-------------------------------------------------------------------- -# Figure out whether "char" is unsigned. If so, set a -# #define for __CHAR_UNSIGNED__. -#-------------------------------------------------------------------- - -#AC_C_CHAR_UNSIGNED - -#-------------------------------------------------------------------- -# Under Solaris 2.4, strtod returns the wrong value for the -# terminating character under some conditions. Check for this -# and if the problem exists use a substitute procedure -# "fixstrtod" (provided by Tcl) that corrects the error. -#-------------------------------------------------------------------- - -AC_CHECK_FUNC(strtod, itk_strtod=1, itk_strtod=0) -if test "$itk_strtod" = 1; then - AC_MSG_CHECKING([for Solaris 2.4 strtod bug]) - AC_TRY_RUN([ - extern double strtod(); - int main() - { - char *string = "NaN"; - char *term; - strtod(string, &term); - if ((term != string) && (term[-1] == 0)) { - exit(1); - } - exit(0); - }], itk_ok=1, itk_ok=0, itk_ok=0) - if test "$itk_ok" = 1; then - AC_MSG_RESULT(ok) - else - AC_MSG_RESULT(buggy) - AC_DEFINE(strtod, fixstrtod) - fi -fi - -#-------------------------------------------------------------------- -# If we are building with cygwin, we need one set of library names, -# otherwise, we need the Source-Navigator set. -#-------------------------------------------------------------------- - - - -if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then - CYGITKLIBSPEC=itk${VERSION} -else - CYGITKLIBSPEC="itk`echo ${VERSION} | tr -d .`" -fi -CYGITKLIB=lib${CYGITKLIBSPEC}.a -CYGITKDLL=cygitk${VERSION}.dll -CYGITKWISH=cygitkwish${VERSION}.exe -CYGITKDEF=itkcyg.def -CYGITKTEST=cygitktest.exe -CYGIMPORTLIB=cygitk${VERSION}.lib -CYGITKRES=cygitk.o -CYGITKWISHRES=cygitkwish.o - -SNITKLIBSPEC=itk30.lib -SNITKLIB=${SNITKLIBSPEC} -SNITKDLL=snitk30.dll -SNITKWISH=snitkwish30.exe -SNITKDEF=itksn.def -SNITKTEST=snitktest.exe -SNIMPORTLIB=snitk30.lib -SNITKRES=snitk.obj -SNITKWISHRES=snitksh.obj - -if test "$GCC" = yes; then -ITKLIBSPEC=${CYGITKLIBSPEC} -ITKLIB=${CYGITKLIB} -ITKDLL=${CYGITKDLL} -ITKWISH=${CYGITKWISH} -ITKDEF=${CYGITKDEF} -ITKTEST=${CYGITKTEST} -ITKIMPORTLIB=${CYGIMPORTLIB} -ITKRES=${CYGITKRES} -ITKWISHRES=${CYGITKWISHRES} -else -ITKLIBSPEC=${SNITKLIBSPEC} -ITKLIB=${SNITKLIB} -ITKDLL=${SNITKDLL} -ITKWISH=${SNITKWISH} -ITKDEF=${SNITKDEF} -ITKTEST=${SNITKTEST} -ITKIMPORTLIB=${SNIMPORTLIB} -ITKRES=${SNITKRES} -ITKWISHRES=${SNITKWISHRES} -fi - -#-------------------------------------------------------------------- -# The statements below define a collection of symbols related to -# building libitk as a shared library instead of a static library. -#-------------------------------------------------------------------- - -AC_ARG_ENABLE(shared, - [ --enable-shared build libitk as a shared library], - [ok=$enableval], [ok=no]) -if test "$ok" = "yes" -a "${SHLIB_SUFFIX}" != ""; then - ITK_SHLIB_CFLAGS="${SHLIB_CFLAGS}" - eval "ITK_LIB_FILE=libitk${VERSION}${SHLIB_SUFFIX}" - ITK_PKG_FILE="[[file join [file dirname \$dir] ${ITK_LIB_FILE}]]" - MAKE_LIB="\${SHLIB_LD} -o ${ITK_LIB_FILE} ${LIBS} \${OBJS} ${SHLIB_LD_LIBS}" - RANLIB=":" -else - ITK_SHLIB_CFLAGS="" - eval "ITK_LIB_FILE=libitk${VERSION}.a" - ITK_PKG_FILE="" - MAKE_LIB="ar cr ${ITK_LIB_FILE} \${OBJS}" -fi - -# Note: in the following variable, it's important to use the absolute -# path name of the Tcl directory rather than "..": this is because -# AIX remembers this path and will attempt to use it at run-time to look -# up the Tcl library. - -if test "$GCC" = yes; then - ITK_BUILD_LIB_SPEC="-L`pwd` -l${ITKLIBSPEC}" - ITK_LIB_SPEC="-L${exec_prefix}/lib/ITK -l{ITKLIBSPEC}" - ITK_LIB_FULL_PATH="`pwd`/${ITKLIB}" -else - tmp="`pwd`/${ITKLIB}" - tmp2="`cygpath --windows $tmp`" - ITK_BUILD_LIB_SPEC="`echo $tmp2 | sed -e s#\\\\\\\\#/#g`" - ITK_LIB_FULL_PATH=${ITK_BUILD_LIB_SPEC} - tmp="${exec_prefix}/lib/ITK/${ITKLIB}" - tmp2="`cygpath --windows $tmp`" - ITK_LIB_SPEC="`echo $tmp2 | sed -e s#\\\\\\\\#/#g`" -fi - -if test "$GCC" = yes; then - BASELIBS="-lkernel32 $optlibs -ladvapi32 -luser32" - WINLIBS="-lgdi32 -lcomdlg32 -lwinspool" - LIBCDLL= -else - BASELIBS="kernel32.lib advapi32.lib user32.lib" - WINLIBS="gdi32.lib comdlg32.lib winspool.lib" - LIBCDLL="msvcrt.lib oldnames.lib" -fi - -AC_SUBST(CFLAGS) -AC_SUBST(DL_LIBS) -AC_SUBST(LD_FLAGS) -AC_SUBST(MATH_LIBS) -AC_SUBST(MAKE_LIB) -AC_SUBST(SHLIB_CFLAGS) -AC_SUBST(SHLIB_LD) -AC_SUBST(SHLIB_LD_LIBS) -AC_SUBST(SHLIB_SUFFIX) -AC_SUBST(SHLIB_VERSION) -AC_SUBST(TCL_BIN_DIR) -AC_SUBST(TCL_BUILD_LIB_SPEC) -AC_SUBST(TCL_SRC_DIR) -AC_SUBST(TCL_VERSION) -AC_SUBST(TCL_LIB_FILE) -AC_SUBST(TCL_LIB_FULL_PATH) -AC_SUBST(TK_BIN_DIR) -AC_SUBST(TK_BUILD_LIB_SPEC) -AC_SUBST(TK_SRC_DIR) -AC_SUBST(TK_VERSION) -AC_SUBST(TK_LIB_FILE) -AC_SUBST(TK_LIB_FULL_PATH) -AC_SUBST(ITCL_BIN_DIR) -AC_SUBST(ITCL_BUILD_LIB_SPEC) -AC_SUBST(ITCL_MAJOR_VERSION) -AC_SUBST(ITCL_MINOR_VERSION) -AC_SUBST(ITCL_SRC_DIR) -AC_SUBST(ITCL_VERSION) -AC_SUBST(ITCL_LIB_FILE) -AC_SUBST(ITCL_LIB_FULL_PATH) -AC_SUBST(ITK_BUILD_LIB_SPEC) -AC_SUBST(ITK_LD_SEARCH_FLAGS) -AC_SUBST(ITK_LIB_FILE) -AC_SUBST(ITK_LIB_FULL_PATH) -AC_SUBST(ITK_LIB_SPEC) -AC_SUBST(ITK_PKG_FILE) -AC_SUBST(ITK_SHLIB_CFLAGS) -AC_SUBST(ITK_SRC_DIR) -AC_SUBST(XINCLUDES) -AC_SUBST(XLIBSW) -AC_SUBST(CYGITKLIB) -AC_SUBST(CYGITKDLL) -AC_SUBST(CYGITKWISH) -AC_SUBST(CYGITKDEF) -AC_SUBST(CYGITKTEST) -AC_SUBST(CYGIMPORTLIB) -AC_SUBST(CYGITKRES) -AC_SUBST(CYGITKWISHRES) -AC_SUBST(SNITKLIB) -AC_SUBST(SNITKDLL) -AC_SUBST(SNITKWISH) -AC_SUBST(SNITKDEF) -AC_SUBST(SNITKTEST) -AC_SUBST(SNIMPORTLIB) -AC_SUBST(SNITKRES) -AC_SUBST(SNITKWISHRES) -AC_SUBST(ITKLIB) -AC_SUBST(ITKDLL) -AC_SUBST(ITKWISH) -AC_SUBST(ITKDEF) -AC_SUBST(ITKTEST) -AC_SUBST(ITKIMPORTLIB) -AC_SUBST(ITKRES) -AC_SUBST(ITKWISHRES) -AC_SUBST(BASELIBS) -AC_SUBST(WINLIBS) -AC_SUBST(LIBCDLL) - -AC_OUTPUT(Makefile ../unix/pkgIndex.tcl ../itkConfig.sh) - |