diff options
Diffstat (limited to 'readline/CHANGELOG')
-rw-r--r-- | readline/CHANGELOG | 339 |
1 files changed, 0 insertions, 339 deletions
diff --git a/readline/CHANGELOG b/readline/CHANGELOG deleted file mode 100644 index 9024bdfdadb..00000000000 --- a/readline/CHANGELOG +++ /dev/null @@ -1,339 +0,0 @@ -[Readline-specific changelog. Descriptions of changes to the source are - found in the bash changelog.] - - 6/9 - --- -Makefile.in - - quote value of ${INSTALL_DATA} when passing it to makes in - subdirectories - - 7/1 - --- -Makefile.in - - don't pass INSTALL_DATA to a make in the `doc' subdirectory; let - autoconf set the value itself in the Makefile - - removed a stray `-' before $(RANLIB) in the `install' recipe - -doc/Makefile.in - - add a VPATH assignment so the documentation is not remade if it's - already up-to-date in the distribution - -configure.in - - call AC_SUBST(LOCAL_LDFLAGS), since Makefile.in contains - @LOCAL_LDFLAGS@ - - 7/9 - --- - -config.h.in - - add define lines for STRUCT_WINSIZE_IN_SYS_IOCTL and - STRUCT_WINSIZE_IN_TERMIOS - -configure.in - - call BASH_STRUCT_WINSIZE to look for the definition of - `struct winsize' - - 7/17 - ---- -configure.in - - call AC_MINIX - -config.h.in - - add define line for AC_MINIX - - 7/18 - ---- -Makefile.in - - add `install-shared' and `uninstall-shared' targets - - 8/4 - --- -Makefile.in - - install and uninstall libhistory.a in the `install' and - `uninstall' targets - - 9/4 - --- -configure.in - - bumped LIBVERSION up to 2.1.1, indicating that this is patch - level 1 to release 2.1 - - - 9/16 - ---- -Makefile.in - - `make distclean' now descends into the `examples' subdir - -doc/Makefile.in - - the `distclean' and `maintainer-clean' targets should remove - Makefile - -examples/Makefile.in - - added the various clean targets - - 4/2 - --- -configure.in - - bumped LIBVERSION up to 2.2 - - 4/18 - ---- -[readline-2.2 released] - - 4/20 - ---- -Makefile.in - - make `libhistory.a' a dependency of `install' - - fixed a typo in the recipe for `install' that copied libreadline.a - to libhistory.old right after installing it - - 4/27 - ---- -doc/Makefile.in - - install {readline,history}.info out of the source directory if - they are not found in the current (build) directory -- only an - issue if the libraries are built in a different directory than - the source directory - - 5/1 - --- -support/shobj-conf - - script from the bash distribution to do shared object and library - configuration - -shlib/Makefile.in - - new directory and makefile to handle building shared versions of - libreadline and libhistory, controlled by support/shobj-conf - - 5/7 - --- -doc/Makefile.in - - set SHELL to /bin/sh, rather than relying on make to be correct - - 5/14 - ---- -savestring.c - - new file, moved from shell.c, for backwards compatibility - -Makefile.in, shlib/Makefile.in - - make sure savestring.c is compiled and added to libreadline and - libhistory - -[THERE ARE NO MORE #ifdef SHELL LINES IN THE C SOURCE FILES.] - - 5/15 - ---- -README - - updated description of shared library creation for the new scheme - -[THERE ARE NO MORE #ifdef SHELL LINES IN ANY OF THE SOURCE FILES.] - -Makefile.in - - bumped SHLIB_MAJOR up to 4 since we've augmented the library - API - - rlconf.h is now one of the installed headers, so applications can - find out whether things like vi-mode are available in the installed - libreadline - - 5/20 - ---- -configure.in - - changed RL_LIBRARY_VERSION to 4.0 to match the version of the - installed shared libraries - - 6/5 - --- -rlstdc.h - - new file - -Makefile.in - - rlstdc.h is now one of the installed headers - - 8/3 - --- -shlib/Makefile.in - - made the suffix rule that creates xx.so from xx.c write the - compiler output to `a.o', which is then mv'd to xx.so, because - some compilers (Sun WSpro 4.2, for example) don't allow any - suffixes other than `.o' for `cc -c' (not even `a.out') - - 9/15 - ---- - -Makefile.in - - AR and ARFLAGS are now substituted by configure, used in recipes - that build the libraries - -configure.in - - use AC_CHECK_PROG to check for ar - - set ARFLAGS if it has not already been set in the environment - - 10/5 - ---- -Makefile.in - - removed savestring.o from object file list - - 10/28 - ----- -shlib/Makefile.in - - don't use a fixed filename in the .c.so suffix rule to avoid - problems with parallel makes - - 12/21 - ----- -support/shlib-install - - new script to install shared readline and history libraries - -shlib/Makefile.in - - changed to call shlib-install for install and uninstall targets - -[readline-4.0-beta1 frozen] - - 12/22 - ----- -configure.in - - call AC_SUBST for SHOBJ_XLDFLAGS and SHLIB_LIBS - -shlib/Makefile.in - - SHOBJ_XLDFLAGS and SHLIB_LIBS are now substituted by configure - - add $(SHLIB_LIBS) at end of command line that builds the shared - libraries (currently needed only by AIX 4.2) - - 12/31 - ----- -MANIFEST, MANIFEST.doc - - the TOC html files are no longer generated and no longer part of - the distribution - - 2/18/1999 - --------- -configure.in - - set MAKE_SHELL to /bin/sh and substitute into the Makefiles - -Makefile.in,{doc,examples,shlib}/Makefile.in - - set SHELL from @MAKE_SHELL@ - -[readline-4.0 released] - - 3/11 - ---- -doc/Makefile.in - - removed references to HTMLTOC, since separate HTML table-of-contents - files are no longer created - -examples/Makefile.in - - remove `*.exe' in clean target for MS-DOS - -Makefile.in - - make `readline' target depend on ./libreadline.a - - configure now substitutes TERMCAP_LIB into Makefile.in - - use ${TERMCAP_LIB} instead of -ltermcap in recipe for `readline' - - clean target now removes readline and readline.exe in case they - get built - -configure.in - - use `pwd.exe' to set BUILD_DIR on MS-DOS DJGPP - - 3/15 - ---- -support/shlib-install - - Irix 5.x and Irix 6.x should install shared libraries like Solaris 2 - - changes for installing on hp-ux 1[01].x - - 3/23 - ---- -configure.in - - make sure that the $CC argument to shobj-conf is quoted - - 4/8 - --- - -xmalloc.h, rlprivate.h, rlshell.h - - new files - -Makefile.in,shlib/Makefile.in - - add dependencies on xmalloc.h, rlshell.h - - add xmalloc.h, rlprivate.h, rlshell.h to list of header files - -MANIFEST - - add xmalloc.h, rlprivate.h, rlshell.h - - 4/9 - --- -Makefile.in,shlib/Makefile.in - - add dependencies on rlprivate.h - - 4/13 - ---- -doc/Makefile.in - - add variable, PSDVI, which is the desired resolution of the - generated postscript files. Set to 300 because I don't have - any 600-dpi printers - - set LANGUAGE= before calling makeinfo, so messages are in English - - add rluserman.{info,dvi,ps,html} to appropriate variables - - add rules to create rluserman.{info,dvi,ps,html} - - install and uninstall rluserman.info, but don't update the directory - file in $(infodir) yet - -MANIFEST - - add doc/rluserman.{texinfo,info,dvi,ps,html} - - 4/30 - ---- -configure.in - - updated library version to 4.1 - - 5/3 - --- -configure.in - - SHLIB_MAJOR and SHLIB_MINOR shared library version numbers are - constructed from $LIBRARY_VERSION and substituted into Makefiles - - 5/5 - --- -support/shlib-install - - OSF/1 installs shared libraries like Solaris - -Makefile.in - - broke the header file install and uninstall into two new targets: - install-headers and uninstall-headers - - install and uninstall depend on install-headers and uninstall-headers - respectively - - changed install-shared and uninstall-shared targets to depend on - install-headers and uninstall-headers, respectively, so users may - choose to install only the shared libraries. I'm not sure about - the uninstall one yet -- maybe it should check whether or not - the static libraries are installed and not remove the header files - if they are - - 9/3 - --- -configure.in, config.h.in - - added test for memmove (for later use) - - changed version to 4.1-beta1 - - 9/13 - ---- -examples/rlfe.c - - Per Bothner's `rlfe' readline front-end program - -examples/Makefile.in - - added rules to build rlfe - - 9/21 - ---- -support/shlib-install - - changes to handle FreeBSD-3.x elf or a.out shared libraries, which - have different semantics and need different naming conventions - - 1/24/2000 - --------- -doc/Makefile.in - - remove *.bt and *.bts on `make clean' - - 2/4 - --- - - -configure.in - - changed LIBVERSION to 4.1-beta5 |