path: root/gdb/gdbtk/generic/ChangeLog-1999

1999-09-23  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdbtk-varobj.c (variable_value):  Fix small memory leak.

Thu Nov 18 18:19:59 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk.c (tk_command), gdbtk-hooks.c (gdbtk_readline),
 	gdbtk-variable.c (variable_type): Replace strdup with xstrdup.

Thu Nov 18 19:03:28 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-cmds.c (gdb_get_mem): Document nbr parameter.  Fix check
 	on nbr and nbytes parameters.

1999-11-18  Tom Tromey  <tromey@cygnus.com>

	* gdbtk-cmds.c (gdb_actions_command): Updated for new
	get_tracepoint_by_number.

Tue Nov  9 15:40:51 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-cmds.c (gdb_get_mem): Keep calling
 	target_read_memory_partial until all the data is read.

1999-11-01  Tom Tromey  <tromey@cygnus.com>

	* gdbtk-cmds.c (gdb_actions_command): Updated for new
	get_tracepoint_by_number.

Fri Oct 15 18:34:41 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-hooks.c (ui_load_progress_hook): Move extern declaration
 	to defs.h.
	(gdbtk_load_hash): Update SECTION argument to match prototype.
  	Make static.

Wed Oct 13 17:57:17 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-hooks.c (gdbtk_flush): Delete.
	(gdbtk_add_hooks): Don't initialize flush_hook.

Mon Oct 11 10:19:04 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-cmds.c (gdb_get_tracepoint_info): Use paddr_nz to convert
 	the address into a string.

1999-10-05  James Ingham  <jingham@leda.cygnus.com>

	* gdbtk-cmds.c (map_arg_registers): Don't stop at the first
	undefined register, but skip it and go on.  There may be other
	defined registers higher up in the list.

1999-09-29  Fred Fish  <fnf@cygnus.com>

	* gdbtk-varobj.c (variable_create):  Replace cast "(CORE_ADDR) - 1"
	with the more obviously intended expression "(CORE_ADDR) -1".

1999-09-23  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdbtk-variable.c (variable_value): Fix handling of baseclasses and
	correct the behavior when it is not a baseclass (both cases could
	potentially dumping core).

1999-09-23  James Ingham  <jingham@leda.cygnus.com>

	* gdbtk.c (gdbtk_init): Add the initialization of the shell
	execute command under cygwin.

	* gdbtk-hooks.c (gdbtk_attach): New function, run from the attach
	hook.  
	(gdbtk_detach): New function, run from the detach hook.
	(gdbtk_add_hooks): Add the attach & detach hooks.

1999-09-23  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdbtk-varobj.c (variable_create): Dynamically allocate variable
	object name string.

1999-09-22  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdbtk-variable.c (_gdb_variable): Remove unused entry.
	(variable_update): Fix error in list initialization (apparently
	innocuous).
	(type_changeable): Fix handling of typedef'ed structs and
	unions (removing c_variable.exp test case 2.12 FAIL).

Mon Sep 20 18:03:28 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-variable.c (new_root_variable): Fix prototype declaration.
	* gdbtk.c (_initialize_gdbtk): Add declaration.
	* gdbtk-cmds.c (tracepoint_exists): Make static.  Add declaration.
	* gdbtk.c (gdbtk_add_hooks): Move declaration from here.
	* gdbtk.h (gdbtk_add_hooks): To here.

Fri Sep 17 19:00:39 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-cmds.c: Include "source.h".
 	(gdb_load_disassembly): Fix printf calls.
	Makefile.in (gdbtk-cmds.o): Add dependency on source.h.

	* gdbtk.c: Include <itk.h> for Itk_Init.

1999-09-17  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdbtk-varobj.c: New file.  It supersedes gdbtk-variable.c and
	uses standard gdb varobj code.

Fri Sep  3 20:16:54 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk.c (gdbtk_init): Cast ``host_name'' and ``target_name'' to
 	void.  While Tcl_SetVar2 treats the value argument as read-only
 	its prototype does not specify const for the parameter.

Mon Aug 30 17:56:28 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk.c, gdbtk-hooks.c, gdbtk-cmds.c: #include <unistd.h> moved
 	to defs.h.

Mon Aug 30 15:34:42 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-hooks.c (x_event): Missing result to return - return 0.
  	Make in_x_event volatile.
	(in_fputs): Make volatile.

1999-09-02  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtk.c: Include version.h, remove inconsistent decls of
 	host_name and target_name.

1999-08-27  James Ingham  <jingham@leda.cygnus.com>

	* gdbtk.h: Add def'n for gdbtk_fputs, since it is needed outside
	of gdbtk-hooks.c

	* gdbtk-cmds.c (gdb_load_disassembly): Really implement this
	function.  Load the source widget from C.
	(gdbtk_load_source): Helper for the above, which loads source lines.
	(gdbtk_load_asm): Helper for the above, which loads assembly
	lines.
	(gdb_restore_fputs): New function, restore the gdbtk_fputs hook,
	in case somebody supressed it, and then errored out before they
	got a chance to put it back.

1999-08-10  James Ingham  <jingham@leda.cygnus.com>

	* gdbtk-hooks.c: Remove the gdb_disassembly_flavor_hook.  Use the
	set_hook instead.

Mon Aug  9 10:28:22 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk.c, gdbtk-cmds.c: Delete #if ANSI_PROTOTYPES code, GDB
 	assumes ISO-C.

1999-08-06  Tom Tromey  <tromey@cygnus.com>

	* gdbtk-hooks.c (gdbtk_add_hooks): Set `set_hook'.
	(gdbtk_set_hook): New function.

1999-08-05  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-variable.c (new_variable): Add missing return value.

1999-08-02  James Ingham  <jingham@leda.cygnus.com>

	* gdbtk-cmds.c: Misc. Cleanups...  Mostly wrapping at 80
	characters. 
	(gdb_loadfile): Go straight to the widget command to insert the
	text, rather than through the interpreter.  Gives about 2x-3x
	speedup in rendering the source text.
	(gdb_disassemble): Rewrite to separate out the generic disassembly 
	work from the printing part.  The former goes in
	gdb_disassembly_driver.  This way I can share the code with the
	version that loads the text widget directly.
	(gdb_load_disassembly): New function.  This will load the text
	widget directly (not done yet).
	(gdbtk_load_source): Load the text widget with a source line. 
	(gdbtk_load_asm): Load the text widget with an assembly line.
	(gdbtk_print_source): Print a source line to stdout.
	(gdbtk_print_asm): Print an assembly line to stdout.
	(gdb_disassemble_driver): New function.

	* gdbtk.h: Fix a compiler warning from Keith's 07-27 checkin.

1999-08-02  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-variable.c (CPLUS_FAKE_CHILD): NULL variables are not
	"fakes", either.

1999-07-27  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-variable.c: Rewrite. :-)
	* gdbtk-wrapper.c (GDB_value_ind): New function.
	(GDB_value_slice): New function.
	(GDB_value_coerce_array): New function.
	(GDB_value_struct_elt): New function.
	(GDB_value_cast): New function.
	(GDB_get_frame_block): New function.
	(wrap_value_slice): New function.
	(wrap_value_coerce_array): New function.
	(wrap_value_struct_elt): New function.
	(wrap_value_cast): New function.
	(wrap_get_frame_block): New function.
	* gdbtk-wrapper.h: Add declarations for above new functions.	
	* gdbtk-cmds.c (gdb_selected_block): New function.
	(gdb_get_blocks): New function.
	(gdb_block_vars): New function.

1999-07-16  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-cmds.c (gdb_loc): Change all references of "stop_pc" to
	"read_pc ()".

	* gdbtk.c (target_is_native): New function.
	(target_should_use_timer): Use target_is_native to determine whether
	the timer should run.
	* gdbtk.h (target_is_native): Add prototype.
	* gdbtk-cmds.c (gdb_disassemble): Use target_is_native to determine if
	we should disassemble from inferior memory.

1999-07-09  Fernando Nasser  <fnasser@totem.to.cygnus.com>

	* gdbtk-variable.c (variable_obj_command): Add missing comments
	for object variable commands.

Fri Jul  9 12:06:36 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-cmds.c (Gdbtk_Init): Explicitly route log/debug and target
 	output to stderr instead of stdout.

1999-06-21  James Ingham  <jingham@leda.cygnus.com>

	* gdbtk.c (target_should_use_timer): Add check for "linuxthreads"
	to enable the timer for Linux as well as other natives.

1999-06-15  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-hooks.c (gdbtk_annotate_signal): Run
	gdbtk_stop_idle_callback so that signals don't interfere
	with the stop button.

1999-06-10  Keith Seitz  <keiths@cygnus.com>

	* gdbtk.c (gdbtk_init): Add host_name and target_name to
	GDBStartup.

	* gdbtk-cmds.c (gdb_clear_file): Delete breakpoints and
	clear the exec file, too.
	(gdb_loadfile): Don't close a file that's not opened until
	later.

Wed Jun  9 14:21:40 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-cmds.c (old_regs): Change array to a pointer.
	(setup_architecture_data): New function.
	(Gdbtk_Init): Call setup_architecture_data.  Register ``old_regs''
 	as an architecture dependant variable.

1999-05-25  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-wrapper.c (GDB_val_print): Fix compiler warnings.
	(wrap_val_print): Ditto.
	(GDB_block_for_pc): Ditto.
	(wrap_block_for_pc): Ditto.
	(GDB_find_frame_addr_in_frame_chain): Ditto.
	(wrap_find_frame_addr_in_frame_chain): Ditto.

	* gdbtk-variable.c (variable_create): Rename "-pc" option
	to the more explicit name "-frame". Update usage.
	(create_variable): Swallow errors before parse_exp_1, too.
	If no frame is given as an argument, use the current frame;
	otherwise, use the current block in the specified frame.
	(variable_children): Check for errors creating children.
	(create_child): Ditto.

	* gdbtk-cmds.c (get_selected_frame): New function.
	(Gdbtk_Init): Add get_selected_frame to interpreter.
	(gdb_get_vars_command): Use current block in selected frame
	if no args specified.

	* Makefile.in (gdbtk-cmds.o): Depend on frame.h, too

Tue May 25 16:12:57 1999  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-cmds.c (REGISTER_CONVERTIBLE,
 	REGISTER_CONVERT_TO_VIRTUAL): Delete default definitions.
  	gdbarch.h ensures that there is always a definition available.

1999-05-20  Andrew Cagney  <cagney@b1.cygnus.com>

	Mon Apr 26 09:15:27 1999  Andrew Cagney  <cagney@b1.cygnus.com>:
	* gdbtk.c (x_event_wrapper): Wrapper for x_event that matches
	signal function signature.
	(gdbtk_start_timer): set .sa_handler to x_event_wrapper instead of
 	x_event.

1999-05-14  Keith Seitz  <keiths@cygnus.com>

	* configure.in (ENABLE_GDBTK): Don't clobber WIN32LIBS.
	* configure: Regenerated.
	
1999-04-12  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-variable.c (variable_value_changed): Swallow errors from
	evaluate_expression.

1999-04-09  James Ingham  <jingham@cygnus.com>

	* gdbtk-cmds.c (gdb_get_mem): Use the Tcl list API to add the
	ASCII entry to the return list.  We were trying to do the quoting 
	by hand which is bound to lose in some cases.

1999-04-06  Martin Hunt  <hunt@cygnus.com>

	* gdbtk-hooks.c (gdbtk_annotate_signal): New function.
	Notifies GDBtk when a signal occurs.

1999-04-02  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-hooks.c (gdbtk_force_detach): New global.
	(x_event): Change to return gdbtk_force_detach so that
	callers will know if we want to detach. See comments.
	(gdbtk_wait): Insert calls to gdbtk_start/stop_timer. This
	is a nop for most hosts/targets. Remove ice-specific code.

	* gdbtk-cmds.c (gdb_stop): Add "detach" option, which forces
	gdb to detach from the target. See comments.

	* gdbtk.c (target_should_use_timer): New function.
	(gdbtk_start_timer): Only use on unix native targets.
	(gdbtk_stop_timer): Ditto.

	* gdbtk.h (x_event): Update declaration: now returns an int.

1999-03-29  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtk.c, gdbtk-cmds.c, gdbtk-hooks.c: Don't include setjmp.h.

1999-03-29  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-cmds.c (pc_function_name): New function which returns the
	source name (regardless of mangling) of the function at a given PC.
	(gdb_get_function_command): Use it.
	(gdb_get_tracepoint_info): Ditto.
	(gdb_loc): Ditto.
	(gdb_get_breakpoint_info): Ditto.

	* Makefile.in (install-only): Don't install help/index.toc: it doesn't
	exist anymore.

Wed Mar 10 19:37:23 1999  Geoffrey Noer  <noer@cygnus.com>

	* gdbtk-cmds.c: Don't need to include any Win32 API headers.
	* gdbtk-hooks.c: Include Windows.h, not just winuser.h.
	* gdbtk.c: Ditto.

1999-03-04  Martin Hunt  <hunt@cygnus.com>

	* gdbtk-hooks.c (gdbtk_load_hash): Change download_hash()
	to Download::download_hash().

1999-03-01  Martin Hunt  <hunt@cygnus.com>

	* gdbtk.c (TclDebug): Increase buffer size to 10000, in case
	backtraces are very long.

1999-02-26  James Ingham  <jingham@cygnus.com>

	* gdbtk-cmds.c (gdb_search): Add a -filename switch, which returns 
	the file in which the function or type was defined, along with the 
	function...

	* gdbtk.c (gdbtk_find_main): The external editor stuff was getting 
	set twice...

1999-02-18  Martin Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (gdb_disassemble): When debugging native threads,
	set disassemble_from_exec to 0. This fixes bugs where disassembly 
	of threaded programs failed.

1999-02-16  James Ingham  <jingham@cygnus.com>

	* gdbtk.c (gdbtk_init): Remove redundant setting of the external
	editor variables.

1999-02-11  Martin Hunt  <hunt@cygnus.com>

	* gdbtk-variable.c (variable_format): Enable binary format.

1999-02-11  Martin Hunt  <hunt@cygnus.com>
	
	* gdbtk-hooks.c: Change ALL Tcl_Eval calls in hooks to
	call report_error() if there are errors.

1999-02-11  Martin Hunt  <hunt@cygnus.com>
	
	* gdbtk.c, gdbtk-cmds.c, gdbtk-hooks.c: Removed old IDE stuff.

1999-02-09  Martin Hunt  <hunt@cygnus.com>

	* gdbtk-hooks.c: Remove gdbtk_ignorable_warning prototype.
	It is in gdbtk.h.
	(report_error): New function. Displays debugging information
	if a hook function fails.  All hook functions should probably
	call this.
	(gdbtk_warning): Call report_error() if there is a problem.
	(gdbtk_register_changed): Call report_error() if there is a problem.
	(gdbtk_memory_changed): Call report_error() if there is a problem.
	(gdbtk_ignorable_warning): Pass along class argument. If there
	is a problem, call report_error().
	
	* gdbtk-cmds.c: Remove TclDebug prototype.  It is in gdbtk.h.
	(gdb_loadfile): Add class name to gdbtk_ignorable_warning call.

	* gdbtk.c (TclDebug): Add "priority" argument. Calls "dbug"
	instead of "debug". Removed non-ANSI ifdefs.

	* gdbtk.h: Fixed protos for gdbtk_ignorable_warning and TclDebug.
	
1999-02-05  James Ingham  <jingham@cygnus.com>

	* Makefile.in: Add GDBTK_CFLAGS - this is now used to hold
	-fwritable-strings when compiling with Tk8.1.
 	* configure.in: Add GDBTK_CFLAGS, set it to -fwritable-strings for 
	Tcl/Tk8.1 & greater.
	* acinclude.m4: Move the rest of the defines to find Itcl, Itk &
	Tix from aclocal.m4 to here.
	* aclocal.m4: regenerate.
	* configure: regenerate.

	* gdbtk-hooks.c (x_event): Tcl_ObjGetVar2 was removed from
	Tcl8.1.  Use Tcl_GetVar2 instead.
	* gdbtk-hooks.c (gdbtk_trace_find): Fix up call to
	Tcl_GlobalEvalObj for Tcl/Tk 8.1.
	* gdbtk-hooks.c (gdbtk_trace_start_stop): Call to Tcl_EvalObj was
	inefficient, replace with call to Tcl_GlobalEval.
	* gdbtk.c: Don't swap out the Tcl_Alloc calls in gdbtk.c.  We took 
	care of that in Tcl itself for 8.1.
	* gdbtk.c: Remove const from the script string since Tcl8.1 has
	taken to scribbling sentinals into strings passed to it again...

	* gdbtk-cmds.c (wrapped_call): Change declaration of 1st arg from
	char * to PTR to eliminate warning.
	* gdbtk-cmds.c (perror_with_name_wrapper): Ditto

Thu Feb  4 10:35:28 1999  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-variable.c (variable_create): Allocate enough
	space to hold the NULL, too!

Wed Feb  3 13:37:07 1999  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-variable.c (variable_create): Add parentheses to the name
	so that casts do not confuse the expression parser.

1999-02-03  Keith Seitz  <keiths@cygnus.com>

	* gdbtool.ico: Add missing desktop image.

1999-02-02  Martin Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (get_register): For RAW display, concat all the
	pieces together before calling fputs.

1999-02-01  Martin Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c: (gdb_set_bp): Change the "type" argument
	to be ASCII instead of an integer. Currently accepts "temp"
	or "normal".  Fixed error messages.
	(gdb_set_bp_addr): Ditto.

1999-01-29  James Ingham  <jingham@cygnus.com>

	* gdbtk.c (gdbtk_init): Set the fputs_unfiltered_hook to
	gdbtk_fputs BEFORE you eval script.  The old code was setting it
	to null until after you did this, but that is wrong, because it
	will cause the output of CAUGHT errors to go to gdb_stderr, which
	is wrong.  You only want to write errors to the console if the
	eval generates an error.

1999-01-29  Martin Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (gdb_get_breakpoint_info): When printing addresses,
        do not rely on the format string "%lx" -- it does not exist for all
        hosts. Use paddr instead.
	(gdb_loadfile): Increase maximum line size to pass testsuite cases.

	* gdbtk-hooks.c (gdbtk_add_hooks): Remove pc_changed_hook and
        add register_changed_hook and memory_changed_hook.
        (gdbtk_register_changed): New function.
        (gdbtk_memory_changed): New function.

        * gdbtk.c (gdbtk_init): Create tcl warp_pointer command
        for use with testing.

        * gdbtk-cmds.c (gdb_loc): Fix for case where there are only
        minimal symbols.  Also make gdb_loc return the shared library
        the location is in, if it is in one.

1999-01-27  James Ingham  <jingham@cygnus.com>

	* gdbtk-wrapper.c: Missed a couple of places where FILE->GDB_FILE
	in the fputs_unfiltered_hook needed to propagate.

1999-01-27  James Ingham  <jingham@cygnus.com>

	Merging in changes from gdbtk-980810 - the Itcl3
	gdb branch.

  1999-01-12  Martin Hunt  <hunt@cygnus.com>

	  * gdbtk-cmds.c (gdb_loadfile): Increase maximum line size so
	  files with very long lines get numbered correctly.

  Thu Jan  7 06:50:32 1999  Keith Seitz  <keiths@cygnus.com>

	  * gdbtk-hooks.c (gdbtk_add_hooks): Add the error_begin_hook;
	  (gdbtk_error_begin): New function.
	  (gdbtk_fputs): If GDBTK_ERROR_ONLY is set, treat output to
	  any stream as if it had come from gdb_stderr.

	  * gdbtk.h: Define GDBTK_SYMBOL_SOURCE_NAME: does the same thing
	  as SYMBOL_SOURCE_NAME, except that it NEVER returns a mangled name.
	  Define GDBTK_ERROR_ONLY flag for result_ptr.

	  * gdbtk-cmds.c (gdb_listfuncs): Use SYMBOL_DEMANGLED_NAME to
	  get the symbol's fully demangled name (including class and
	  args for overloaded funcs), not cplus_demangle.
	  (get_frame_name): Use GDBTK_SYMBOL_SOURCE_NAME to get the name
	  of the frame level.

	  * gdbtk-wrapper.c, gdbtk-wrapper.h:
	  (GDB_val_print): Allow caller to specify all function args to val_print.
	  (wrap_val_print): Ditto.

	  * gdbtk-variable.c (variable_value): Clear addressprint when getting
	  value of C++ reference-type variables
	  If we errored because a parent (struct pointer) was junk, output
	  an error message indicating so.
	  (call_gdb_val_print): Tell val_print to dereference C++ reference
	  types.
	  (number_of_children): void * also has no children.
	  (get_call_output): Clear any error flags that may have been set
	  as a result of error_begin.

	  * utils.c (error_begin_hook): New hook.
	  (error_begin): Call error_begin_hook so that the GUI
	  gets notified.

	  * defs.h (error_begin_hook): Declare.

  Wed Jan  6 08:43:31 1999  Keith Seitz  <keiths@cygnus.com>

	  * gdbtk-wrapper.c, gdbtk-wrapper.h: Add wrappers for parse_exp_1,
	  evaluate_type, block_for_pc, block_innermost_frame, reinit_frame_cache,
	  and find_frame_addr_in_frame_chain.

	  * gdbtk-variable.c (variable_create): Check for failure when
	  creating variables.
	  (create_variable): Use wrapped calls for block_for_pc, parse_exp_1,
	  and block_innermost_frame.
	  Return NULL if parse_exp_1 fails.
	  Attempt to prohibit creating a gdb_variable for type names.
	  (variable_value_changed): Use wrapped calls for reinit_frame_cache and
	  find_frame_addr_in_frame_chain.
	  (variable_type): Use wrapped call for evaluate_type.
	  (variable_value): Use wrapped call for parse_exp_1.
	  (variable_editable): Use wrapped call for evaluate_type.

  Tue Jan  5 11:37:17 1999  Keith Seitz  <keiths@cygnus.com>

	  * gdbtk-variable.c: New variable object interface.
	  * gdbtk-wrapper.c, gdbtk-wrapper.h: New wrappers for safely calling
	  gdb functions without the fear of longjmp'ing.
	  * configure.in (CONFIG_OBS): Add gdbtk-wrapper.o and gdbtk-variable.o
	  when gdbtk is enabled.
	  * configure: Regenerate.
	  * Makefile.in: Add gdbtk-wrapper.o and gdbtk-variable.o
	  * gdbtk-cmds.c (call_wrapper): Export so that other files can use.
	  (Gdbtk_Init): Initialize new variable interface.
	  * gdbtk.h: Add declaration for call_wrapper.

  Tue Jan  5 11:19:14 1999  Keith Seitz  <keiths@cygnus.com>

	  * gdbtk-cmds.c (gdb_loc): Call resolve_sal_pc to before using
	  the sal's pc.

	  * gdbtk.c (gdbtk_init): Add global array GDBStartup to interpreter
	  which contains any startup info. Add "inhibit_prefs" (follows -nx)
	  so that "-nx" turns preference reading/writing off.

  Mon Dec 21 11:11:02 1998  Keith Seitz  <keiths@cygnus.com>

	  * gdbtk-cmds.c (get_register): Call get_saved_register instead of
	  read_relative_register_raw_bytes to fetch registers.

  Thu Dec 17 09:00:56 1998  Keith Seitz  <keiths@cygnus.com>

	  * gdbtk-cmds.c (gdb_search): Don't mention C++ RTTI and
	  global constructor/destructor symbols.

  Thu Nov 12 15:20:15 1998  Jim Ingham   <jingham@cygnus.com>
	  * More bug fixes merged in from devo.

	  * gdbtk-cmds.c (gdb_cmd): Added an optional second argument to the
	  gdb_cmd, which is from_tty.  This is passed to the gdb command
	  parser.  It is 0 by default, and the console window passes 1.

	  * gdbtk-cmds.c: moved disassemble_from_exec from gdbtk.c to gdbtk-cmds.c
	  with all the other link-var'ed variables

	  * gdbtk-hooks.c (gdbtk_trace_find): Only run the hook functions if 
	  we are called from_tty.

	  * gdbtk-hooks.c (gdbtk_trace_start_stop): Set the trace buttons
	  from a trace_start_command callback rather than doing it as a
	  special case in gdb_cmd.

	  * tracepoint.c (tstart_command, tstop_command): Add call to
	  trace_start_stop_hook here.

  1998-11-04  Martin M. Hunt  <hunt@cygnus.com>

	  * gdbtk-cmds.c (gdb_set_bp_addr): For callback, send full 
	  pathname instead of just basename.

  1998-11-03  Keith Seitz  <keiths@cygnus.com>
	  * v850ice.c (do_gdb): New function.
	  (ice_stepi): Use do_gdb to step properly.
	  (ice_nexti): Use do_gdb to step properly.
	  (view_source): Correct call to src window's location for new version.

  Tue Aug 25 18:13:30 1998  Jim Ingham    <jingham@cygnus.com>

	  * gdbtk.c (gdbtk_init): I hadn't excised ALL the old startup code, 
	  so it was not working correctly.  Now it does.

  Fri Aug 21 14:37:40 1998  Jim Ingham	<jingham@cygnus.com>

	  * gdbtk.c (gdbtk_init): Changed the startup code to use
	  tcl_findLibrary



	
on Dec 28 17:44:36 1998  David Taylor  <taylor@texas.cygnus.com>


	The following changes were made by Jim Blandy <jimb@cygnus.com>,
 	Edith Epstein <eepstein@cygnus.com>, Elena Zannoni
 	<ezannoni@cygnus.com> Stan Shebs <shebs@cygnus.com>, and David
 	Taylor <taylor@cygnus.com>, as part of the project to merge in
 	changes originally made by HP; HP did not create ChangeLog
 	entries.

	* gdbtk.c (gdbtk_init): change stderr to gdb_stderr.

	* gdbtk-cmds.c
	(get_pc_register): Use paddr_nz, not sprintf's %llx and
	a cast to `long long'.  Those aren't portable.
	(gdb_eval): add embedded_offset param to val_print call
	(get_register): add embedded_offset param to val_print call

	* gdbtk-hooks.c
	(tk_command_loop): change instream to a FILE.
	(gdbtk_flush): change both the declaration and definition to 
	use GDB_FILE rather than FILE.

Mon Dec 21 11:11:02 1998  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-cmds.c (get_register): Call get_saved_register instead of
	read_relative_register_raw_bytes to fetch registers.

Thu Dec 17 09:00:56 1998  Keith Seitz  <keiths@cygnus.com>

        * gdbtk-cmds.c (gdb_search): Don't mention C++ RTTI and
        global constructor/destructor symbols.

Tue Dec 15 10:09:31 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-cmds.c (gdb_disassemble): Fix typo.

Sun Dec 13 09:52:51 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk-cmds.c: Update TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN.

Fri Dec 11 09:52:04 1998  Andrew Cagney  <cagney@chook>

	* gdbtk-cmds.c: Replace reg_name with REGISTER_NAME.
	
Mon Dec 14 13:20:50 1998 Jim Ingham  <jingham@cygnus.com>

	* Makefile.in, configure.in configure - add support for LIBGUI
	outside the IDE context.
	
Thu Nov 19 13:14:57 1998  Geoffrey Noer  <noer@cygnus.com>

	* gdbtk-cmds.c: Can't start using new API names yet.  Switch back
	to calling cygwin32_ funcs until some time has passed...
	* gdbtk.c: Ditto.  Also, include sys/cygwin.h for Cygwin, instead
	of providing own proto.

Fri Nov 13 00:15:08 1998  Geoffrey Noer  <noer@cygnus.com>

	Changes to account for name change from cygwin32 to cygwin and
	clean up Win32-related ifdefs.
	
        * gdbtk.c: lose "32" from cygwin_ func calls.  ifndef for
        checking DISPLAY should be for _WIN32, not WINNT.
        * gdbtk.h: pick GDBTK_PATH_SEP based on _WIN32, not WINNT.
        * gdbtk-cmds.c (gdb_path_conv): lose "32" from cygwin_	func call,
        change ifdef to __CYGWIN32__ instead of WINNT.
	* {gdbtk.c, gdbtk-hooks.c}: __CYGWIN32__ refs drop the "32".

Thu Nov 12 15:20:15 1998  Jim Ingham   <jingham@cygnus.com>

	* gdbtk-cmds.c (gdb_cmd): Added an optional second argument to the
	gdb_cmd, which is from_tty.  This is passed to the gdb command
	parser.  It is 0 by default, and the console window passes 1.

	* gdbtk-cmds.c: moved disassemble_from_exec from gdbtk.c to gdbtk-cmds.c
	with all the other link-var'ed variables

	* gdbtk-hooks.c (gdbtk_trace_find): Only run the hook functions if 
	we are called from_tty.

	* gdbtk-hooks.c (gdbtk_trace_start_stop): Set the trace buttons
	from a trace_start_command callback rather than doing it as a
	special case in gdb_cmd.

	* tracepoint.c (tstart_command, tstop_command): Add call to
	trace_start_stop_hook here.
	
Wed Nov  4 12:41:42 1998  Jim Ingham  <jingham@cygnus.com>

	* gdbtk-cmds.c (gdb_set_bp_addr): Pass the type, enable & thread
	to gdbtk_tcl_breakpoint.
	* gdbtk-hooks.c (gdbtk_trace_find): Added this function.  It is
	the hook function for tfind commands.
	* tracepoint.c (trace_find_command): Added the trace_find_hook,
	run when you do trace_find_command.
	* tracepoint.h: Define the trace_find_hook.

1998-11-03  Keith Seitz  <keiths@cygnus.com>

        * v850ice.c (do_gdb): New function.
        (ice_stepi): Use do_gdb to step properly.
        (ice_nexti): Use do_gdb to step properly.
        (view_source): Correct call to src window's location for new version.

Mon Nov  2 11:16:10 1998  Jim Ingham  <jingham@cygnus.com>

	* gdbtk-cmds (gdb_get_tracepoint_info): Demangle C++ function names.	

Fri Oct 30 11:22:23 1998  Jim Ingham  <jingham@cygnus.com>

	* gdbtk-cmds (gdb_get_tracepoint_info): Fixed typo.
	
Wed Oct 28 16:19:02 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (gdb_set_bp_addr): For callback, send full 
	pathname instead of just basename.

Wed Oct 28 10:14:33 1998  Jim Ingham   <jingham@cygnus.com>

	* gdbtk-cmds.c: Made the bdtypes & bpdisp arrays shared so they
	could be used in gdbtk-hooks.c (breakpoint_notify).
	Also fixed a few error messages to actually print the bp number
	rather that #%d...	
	* gdbtk-hooks.c (breakpoint_notify): pass more of the information
	about the breakpoint into the Tcl command, so it does not have to
	try and guess about information we have on the C side.
	* gdbtk.h: Export the bptypes & pbdisp arrays.
	
1998-10-13  Jason Molenda  (jsm@bugshack.cygnus.com)

 	* gdbtk.c, gdbtk-cmds.c: Cast parameters passed to make_cleanup to
 	use the new make_cleanup_func typedef.

1998-10-08  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-hooks.c (gdbtk_add_hooks): Install a hook for
	(new) file_changed_hook.
	(gdbtk_exec_file_changed): Rename to gdbtk_exec_file_display
	to mimic hook's name.
	(gdbtk_file_changed): New hook function.
	
Tue Oct  6 22:57:13 1998  Andrew Cagney  <cagney@b1.cygnus.com>

	* configure.in (links): Link gdbtcl2 directory instead of gdbtcl.

Mon Oct  5 00:34:00 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (gdb_set_bp_addr): New command. Sets a
	breakpoint at an address. Use this instead of gdb_cmd "break"
	because the syntax of the break command is broken and doesn't
	allow you to create a thread-specific BP at an address.  Also
	this is faster.

Sun Oct  4 22:35:47 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (gdb_set_bp): Add an optional thread number.
	(gdb_find_bp_at_line): New function. Returns a list of bpnums 
	at the specified line number.
	(gdb_find_bp_at_addr): New function. Returns a list of bpnums 
	at an address..

1998-10-02  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-hooks.c (gdbtk_exec_file_changed): New function which handles
	exec_file changes.
	(gdbtk_add_hooks): Define exec_file_display_hook (to gdbtk_exec_file_changed)

	* gdbtk-cmds.c (gdb_stop): target_stop is ALWAYS defined, so
	compare against something a little more meaningful (target_ignore).

1998-09-24  Keith Seitz  <keiths@cygnus.com>

	* gdbtk.c (gdbtk_wait): Don't run the timer for ice targets.

	* v850ice.c (WM_ADDR_TO_SYM): New message.
	(v850ice_wndproc): Add handler for WM_SOURCE.
	(v850ice_wait): Call the ui_loop_hook occasionally.
	(ice_cont): Acknowledge message before doing anything.
	(ice_stepi): Ack message and let gdbtk do stepping.
	(ice_nexti): Ack message and let gdbtk do stepping.
	(view_source): New function ICE calls to display source code.

1998-09-18  Keith Seitz  <keiths@cygnus.com>

        * gdbtk-cmds.c (get_frame_name): Demangle function names, too.

Thu Sep 10 22:10:29  1998 Jim Ingham <jingham@cygnus.com>

	*gdbtk-cmds.c (gdb_disassemble): Make sure the symtab's linetable is not
	null before trying to use it...
	
1998-09-02  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-cmds.c (gdb_cmd): Do not run the timer when downloading --
	the ui_progress_hook that has been installed will actually
	update the gui for us.

Mon Aug 31 15:42:10 1998  Tom Tromey  <tromey@cygnus.com>

	* gdbtk-hooks.c (context_hook): Don't define.

1998-08-31  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-cmds.c (gdb_listfuncs): When stripping out "global destructors"
	and "global constructors", do not append any elements to the result.

Sun Aug 30 00:49:18 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (Gdbtk_Init): Link C variable gdb_context
	with tcl variable gdb_context_id.

	* gdbtk-hooks.c (gdbtk_context_change): Implement new hook called 
	context_hook.  Called when threads change.

	* gdbtk.c: Initialize gdb_context.

	* gdbtk.h: Declare gdb_context.

	* infrun (wait_for_inferior): Call context_hook.

	* thread.c (thread_command): Call context_hook.

	* defs.h: Declare context_hook.
	
Fri Aug 28 12:14:49 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (gdb_loadfile): Open the file after doing
	the symtab lookup and calling symtab_to_filename(). This
	makes GDBtk work with the GDB "dir" command.

1998-08-18  Keith Seitz  <keiths@cygnus.com>
	
	* gdbtk-hooks.c (gdbtk_add_hooks): Set selected_frame_level_changed_hook.
	(gdbtk_selected_frame_changed): New function.

	* gdbtk-cmds.c (Gdbtk_Init): Add command gdb_stack into interpreter.
	Link gdb's global selected_frame_level with interpreter global
	gdb_selected_frame_level.
	(gdb_stack): New function to faciltate speedier backtraces from
	gdbtk.
	(get_frame_name): New helper function for gdb_stack.

Tue Aug 18 15:42:40 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (gdb_listfuncs): Strip out global constructors
	and destructors from the function list.

Thu Aug 13 15:09:59 1998  Drew Moseley  <dmoseley@cygnus.com>

	* gdbtk.c (gdbtk_cleanup): added a scope-level around the contents
	of the #ifdef so that the variable declarations in there would not
	be illegal in a C compilation.

Mon Jul 27 13:07:16 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdbtk_call_command): Removed because it is now
	in gdbtk-hooks.c
	(null_routine): Removed.

	* gdbtk-hooks.c (tracepoint_notify): Fix sprintf to
	match number of arguments.

	* gdbtk-cmds.c (gdb_loc): When calling gdb_loc with an
	argument, call find_pc_line() to get a complete
	symtab_and_line struct.

Fri Jul 24 14:25:43 1998  Keith Seitz  <keiths@cygnus.com>

	* gdbtk-cmds.c (gdb_search): Add missing NULL to switches.
	Add missing flags to result_ptr.
	Pass along any errors caused by getting the list of files from
	tcl.
	Allocate correct amount of memory for the file list.
	Don't do any unecessary cleanups.

Fri Jul 24 01:08:37 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk-cmds.c (gdb_loadfile): When there are no
	linenumbers, use only one tab.

Sat Jul 18 12:28:39 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdbtk_cleanup): Add call to tcl function
	gdbtk_cleanup. We need this so the GUI gets to clean
	up no matter how GDB exits.

Wed Jul  1 13:10:58 1998  Jim Ingham   <jingham@cygnus.com>

	* Moved gdbtk_hooks.c & gdbtk_cmds.c to gdbtk-hooks.c &
	gdbtk-cmds.c to comply with the gdb conventions.  Changed the
	configure & makefile to reflect the change...
	
Wed Jul  1 11:07:21 1998  Jim Ingham   <jingham@cygnus.com>

	* gdbtk.c: removed all the commands and hooks from this file so
	now it contains only the startup code.
	* gdbtk.c (gdbtk_init): Fixed a bug in the startup code on Windows 
	that caused gdbtk not to find the share directory unless
	GDBTK_LIBRARY was set.
 	* gdbtk_cmds.c: New file - this contains all the Tcl commands that
	gdb defines.  All the old commands were moved here, the
	string-based commands were converted to object commands, and the
	object-based commands were all converted to uniformly use the
	call_wrapper.  A new function, Gdbtk_Init was added to centralize
	initializing the gdb package.
	* gdbtk_hooks.c: New file - All the hooks were moved here, and a new
	function, gdbtk_add_hooks was added to centralize adding all these 
	hook functions.  gdbtk_fputs was also modified to handle the new
	result_ptr structure.  See the comments in gdbtk.h for more
	details.
	* gdbtk.h: New file - this contains all the defines and globals
	shared by gdbtk.c, gdbtk_cmds.c & gdbtk_hooks.c
	* Makefile.in, configure.in & configure: mutatis mutandi for the
	new files.
	

Mon Jun 29 11:49:17 1998  Keith Seitz  <keiths@cygnus.com>

	* main.c (main): Don't include gdbtk test code if GDBTK is
	not defined by configure.

	* configure.in: When enabling gdbtk, add "-DGDBTK" to ENABLE_CFLAGS.

	* configure: Regenerate.
	
Fri Jun 26 13:56:07 1998  Keith Seitz  <keiths@cygnus.com>

	* gdbtk.c: Change all references to static global "interp" to
	"gdbtk_interp" and export this global.
	(gdbtk_init): If gdbtk_source_filename is not NULL, source this file
	into the interpreter when it goes idle.
	Add new command "gdb_search".
	(gdb_search): New function which searches the symbol table.
	(gdbtk_test): New function called by main when the --tclcommand
	option is used.

	* main.c (main): Add a new option "--tclcommand" which is used
	by the testsuite to source a file into the interpreter when it
	goes idle.

Sun Jun 21 09:31:12 1998  Ron Unrau  (runrau@cygnus.com)

	* gdbtk.c (gdb_set_bp): Use new interface.

Wed Jun 17 19:12:23 1998  Jeff Holcomb  <jeffh@cygnus.com>

	* Makefile.in (install-only): Install tracing help files.

Mon Jun 15 13:18:21 1998  Jim Ingham <jingham@cygnus.com>

	* gdbtk.c (gdbtk_init): Add elements to the auto_path AS LIST
	ELEMENTS.  This allows gdbtk to work when installed in a directory 
	which has a space in the path.  D. Moseley pointed out the bug.


Tue Jun  9 14:10:46 1998  Keith Seitz  <keiths@cygnus.com>

	* gdbtk.c (gdb_get_vars_command): Return static variables and
	variables stored in registers.

	* main.c (main): Call pre/post_add_symbol_hook's when loading
	executables and symbol files.
	
Fri Jun  5 00:16:22 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdbtk_init): Change all references to
	GDBTK_IDE to IDE_ENABLED.

Thu Jun  4 18:31:53 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdbtk_init): Initialize tkTable.

Thu Jun  4 10:15:03 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdbtk.c: merged:
	
	- Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
        (call_obj_wrapper): in case of error, copy the
        error message from the result to the error_string.
        (gdbtk_fputs): add comments.
        (gdb_actions_command): call validate_actionline when installing the
        tracepoint, to do the syntax checking of the actions for us.
        - Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
        (gdb_get_trace_frame_num): new function to get the
        trace frame number from gdb.
        (gdbtk_init): added new command gdb_get_trace_frame_num.
        - Jim Blandy  <jimb@zwingli.cygnus.com>
        (struct wrapped_call_objs): Change the `func' member to
        be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector
        of objects as arguments.  Change the object vector to be const,
        since that's what all the users of this structure seem to expect.
        (call_obj_wrapper): Cast clientData properly before storing it in
        the wrapped_args structure.
	
Thu May 28 17:19:14 1998  Keith Seitz  <keiths@cygnus.com>

	* gdbtk.c (_initialize_gdbtk): Get rid of the console. Patch from
	Chris Faylor (cgf@cygnus.com).

	* configure.in: Link cygwin32 with subsystem console.

	* configure: Regenerated
	
Sun May 24 14:00:24 1998  Keith Seitz  <keiths@cygnus.com>

	* ser-unix.c (wait_for): Do not reset timeout_remaining for cygwin32 so that
	we can use this member to track real timeouts.
	(hardwire_readchar): Modify for cygwin32 so that we only ever use a real
	system timeout of one second. Track the "real" timeout as a series of these
	one second timeouts.
	Call ui_loop_hook to keep the gui alive.

	* top.c: Define new hook for cygwin32, "ui_loop_hook".

	* gdbtk.c (gdbtk_init): Add ui_loop_hook for CygWin32 to work around
	update problems.

Thu May 21 13:56:24 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
       
	* gdbtk.c: reinserted the changes that were accidentally deleted:
	(_initialize_gdbtk): Use correct device names in
	cygwin-specific call (cosmetic change). 
        (gdbtk_ignorable_warning): removed va_list parameter,
	which was unused.
        (_initialize_gdbtk): add cygwin32 specific code to
	allow `gdb -nw' to work when specified specified from a windows
	console-mode command line.

1998-05-19  Jim Blandy  <jimb@zwingli.cygnus.com>

	* gdbtk.c (struct wrapped_call_objs): Change the `func' member to
 	be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector
 	of objects as arguments.  Change the object vector to be const,
 	since that's what all the users of this structure seem to expect.
	(call_obj_wrapper): Cast clientData properly before storing it in
	the wrapped_args structure.

Wed May 13 11:12:58 1998  James Ingham  <jingham@leda.cygnus.com>

	* gdbtk.c: Fixed a goof in the definition of the gdb_get_args &
	gdb_get_locals Tcl commands.  Moved the previous ChangeLog entry
	from ChangeLog to ChangeLog-gdbtk (here)...
	
Tue May 12 13:29:20 1998  Jeff Holcomb  <jeffh@cygnus.com>

	* Makefile.in (install-only): Add images/icons.txt and
	images2/icons.txt to files that need to be installed.

Tue May 12 12:03:16 1998  James Ingham  <jingham@leda.cygnus.com>

	* gdbtk.c: Add an object call wrapper for the new Tcl_Obj based
	commands.  This way the obj commands will also go through
	catch_errors.  This is just a bandaid while I rewrite the
	string-based commands to use the object format.

Tue May  5 09:30:25 1998  Christopher Faylor <cgf@cygnus.com>

	* gdbtk.c (_initialize_gdbtk): Use correct device names in
	cygwin-specific call (cosmetic change). 

Wed Apr 29 15:53:16 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdbtk.c (gdbtk_ignorable_warning): removed va_list parameter,
	which was unused.

Tue Apr 28 19:41:33 1998  Tom Tromey  <tromey@cygnus.com>

	* Makefile.in (GDBTKLIBS): New macro.
	(INSTALLED_LIBS): Include GDBTKLIBS.
	(CLIBS): Likewise.
	* configure: Rebuilt.
	* configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
	(GDBTKLIBS): AC_SUBST.

Thu Apr 23 19:01:05 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* Makefile.in (install-only): Install help files.

Wed Apr 22 21:17:35 1998  Christopher Faylor <cgf@cygnus.com>

	* gdbtk.c (_initialize_gdbtk): add cygwin32 specific code to
	allow `gdb -nw' to work when specified specified from a windows
	console-mode command line.

Wed Apr 15 11:23:53 1998  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtcl: Remove directory and contents, this version of
	the interface is obsolete.

Mon Apr 13 16:17:52 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdb_loadfile): Change fstat() call to stat().
	Needed because you can't convert a FILE* to an fd.

Mon Apr 13 16:28:07 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
	
	* gdbtk.c: (perror_with_name_wrapper) new function to call 
	perror_with_name safely.
	(gdb_loadfile) added source vs. executable time stamp check.
	(gdbtk_warning) new function to pass a warning message to the gui.
	(gdbtk_ignorable_warning) new function to pass a warning
	to the gui. Used only for the src. vs. exec check.
	(gdbtk_init) added warning_hook 
	added include <sys/stat.h>

Mon Apr 13 12:58:26 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdbtk_start_timer): Include on all platforms. Decrease
	timer interval a little.
	(gdbtk_stop_timer): Include on all platforms.
	(gdbtk_wait): No more signals! Use a timer on all platforms to keep the
	GUI alive.
	(gdbtk_init): Remove FIOASYNC and all x_fd references. Now using timers
	on all platforms.
	
Fri Apr 10 15:48:10 1998  Jason Molenda  (crash@bugshack.cygnus.com)

        * gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically.

Thu Apr  9 14:20:59 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdbtk_init): Remove redundant variable "IDE".

Tue Apr  7 15:13:58 1998  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtk.tcl: Remove, no longer used.

Tue Apr  7 12:49:45 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdb_cmd): NEVER call the busy, update, and idle hooks.

Tue Mar 31 15:42:06 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdb_loadfile): Don't use the return result from
 	sprintf, which returns a char * under SunOS4.

Tue Mar 31 17:18:43 1998  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Add $(LIBIDETCL) as well as $(LIBIDE) if
	--enable-ide.
	* Makefile.in (IDE_CFLAGS_X): Add -I for libidetcl/src.
	(LIBIDETCL): Define.
	* configure: Rebuild.

Sun Mar 29 21:19:46 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdb_get_tracepoint_info): Change formatting of address.
	(tracepoint_exists): Remove code which confuses assembly traces.

Sat Mar 28 12:13:23 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdb_cmd): If argc > 2, assume that the busy and idle hooks
	should not be called.

Thu Mar 26 22:29:28 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdbtk.c: (gdb_trace_status) new function.
        (gdbtk_init) added command "gdb_is_tracing".
        (tracepoint_notify) added passcount information.

Thu Mar 26 12:00:35 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdbtk_fputs): Insert fencepost.
	(gdb_loc): Correct pc calculation.
	(gdb_immediate_command): Return if a load is in progress.
	(gdb_cmd): Return if a load is in progress.
	(target_stop_wrapper): New function.
	(gdb_stop): Call target_stop_wrapper.
	(x_event): Add fencepost and optimize load cancel check.
	(gdbtk_start_timer): Set up structs only once.
	(gdbtk_stop_timer): Just use preset structs to set timer parameters.
	(gdb_loadfile): If file cannot be loaded, return error message.
	(gdb_loadfile): Add space before tab so that lines without
	a '-' can later be changed to have one.

Wed Mar 25 14:08:51 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdbtk.c (gdbtk_pre_add_symbol): Use Tcl_merge to form Tcl commands.

Mon Mar 23 13:41:39 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	* gdbtk.c (gdb_get_mem): Rewrite to fetch entire contents
	of the memory window at once.

Sat Mar 21 19:34:49 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

	Merged changes from Foundry: list follows by author:
	
	- Tom Tromey  <tromey@cygnus.com>

	* Makefile.in (gdbres.o): New target.
	(WINDRES): New define.
	* configure: Rebuilt.
	* configure.in (WINDRES): Define.
	(CONFIG_OBS): Include gdbres.o on Windows.
	* gdbtool.ico: New file.
	* gdb.rc: New file.
        * gdbtk.c (gdbtk_init): Call ide_create_messagebox_command.
	(gdbtk_cleanup): Call ide_interface_deregister_all.
	(gdbtk_init): Pass event handle to cleanup.
	(TclDebug): Use Tcl_Merge to construct command.
	(gdbtk_init): Call ide_create_cygwin_path_command.

        - Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdb_set_bp): Set addr_string for bp.
	(gdb_get_breakpoint_info): Demangle function 
	names in breakpoint info.
	Include "demangle.h".
	(gdb_loc, gdb_listfuncs): Demangle C++ 
	function names.
	(gdb_set_bp): Properly quote filename to fix
	problems with spaces. Send pc back as a hex string.
	(gdb_listfuncs): Remove debugging line.
	 Turn off some debugging lines.
 	(breakpoint_notify): Return correct line number.
	(gdb_get_breakpoint_info): Return correct line number.
	(gdb_set_bp): New function to provide a better way to
	set breakpoints.
	(gdbtk_readline, gdbtk_readline_begin): Memory 
	allocated by tcl needs to be freed by Tcl_Free().
	(find_file_in_dir): Deleted.
	(gdb_find_file_command): Call full_lookup_symtab().
	(gdb_listfuncs): Call full_lookup_symtab().
	(full_lookup_symtab): New function.  Like lookup_symtab
	except handles multiple files with the same basename,
	full pathnames, and always sets symtab->fullname.
	(gdb_loadfile): Call full_lookup_symtab(). Clear
	realloc'd memory.
	(gdb_loadfile):  Don't tag lines without source.
	Tag source lines with source_tag.
	(gdb_find_file_command, find_file_in_dir):
 	Rewrite.  Now searches symtabs and psymtabs for a match
	on the partial or full filename.  Returns the full pathname.
	(gdb_loadfile): Realloc additional memory
	if someone loads in a file with more than 160,000
	lines.  I don't know if this really works because
	I don't have enough memory to test it.
	(gdb_sourcelines): Deleted.
	(gdb_loadfile): New function. Takes a text widget
	and loads it with the contents of a file.  Marks
	and tags source lines.
	(pc_changed): New function.
	(get_pc_register): Returns the value of
	the PC to GDB.
	(gdb_loc): If looking on the stack, return
	real pc along with calling source line.
	(gdb_loc): Return "" instead of "N/A" if
	filename is not found.
	(gdb_get_breakpoint_info): Same.
	(get_register): For Natural mode, set format to 0.
	 Minor bugfixes from keiths.
	(TclDebug): New function for debugging use.
	(gdb_loc): Return correct PC for frames
	that are not the innermost frame.
	(gdb_listfiles): Rewritten to use object
	API.  Now takes an optional dirname which will cause
	only files in that directory or its subdirectories
	to be returned.  Now returns basenames instead of
	full pathnames.
	(gdb_cmd): Set/reset load_in_progress flag.
	(call_wrapper): Don't pop up dialog for errors in
	downloads; just abort download.
	(gdbtk_load_hash): Set return value correctly.

        -  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdbtk_init): Define the ui_loop_hook so that it can be
	called by routines which might block, allowing us to update the GUI.
	(gdbtk_wait): Move timer calls to annotation hooks.
	(gdbtk_init): Define the annotation hooks.
	(gdbtk_annotate_starting): New function for cygwin32 hosts.
	(gdbtk_annotate_stopped): New function for cygwin32 hosts.
	(gdbtk_annotate_exited): New function for cygwin32 hosts.
	(gdbtk_annotate_signalled): New function. for cygwin32 hosts.
	(gdbtk_init): Use gdbtk_print_frame_info hook.
	(gdbtk_print_frame_info): New function which sets current_source_symtab
	based on the given symtab and line info.
	(gdb_immediate_command): New function which does 
	not buffer any
	output. (Contrast to gdb_cmd.)
	(gdb_prompt_command): New function to return gdb's prompt.
	(find_file_in_dir): New functon which searches source paths 
	for a given filename.
	(gdb_find_file): New function which returns path to given file -- uses
	find_file_in_dir.
	(gdbtk_init): Install "gdb_immediate", "gdb_find_file", and 
	"gdb_prompt"
 	commands into interpreter.

        -  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (gdbtk_timer_going): If __CYGWIN32__, new static
	variable.
	(gdb_cmd): If __CYGWIN32__, if executing the load command, call
	gdbtk_start_timer and gdbtk_stop_timer.
	(call_wrapper): If __CYGWIN32__, if the timer is going, turn it
	off.  Clear load_in_progress.
	(x_event): If load_in_progress, quit if download_cancel_ok.
	(gdbtk_start_timer): Set gdbtk_timer_going.
	(gdbtk_stop_timer): Clear gdbtk_timer_going.
	(gdbtk_wait): Call x_event.
	(gdbtk_init): Call ide_create_win_grab_command if
	__CYGIN32__.
	(gdb_clear_file): Clear stop_pc.

Wed Mar  4 16:50:18 1998  Jason Molenda  (crash@bugshack.cygnus.com)

	* gdbtk.c (gdb_listfiles): Fix thinko in last change.

Wed Mar  4 15:34:49 1998  Jason Molenda  (crash@bugshack.cygnus.com)

	* gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically.

Tue Feb 10 17:50:37 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdbtk_modify_tracepoint): Define new tracepoint modification hook.
	(gdbtk_print_frame_info): Define this hook so that current_source_symtab
	is set properly.
	(gdb_actions_command): Use free_actions () from tracepoint.c/h.
	
Mon Jan 26 11:37:55 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdb_actions_command): Make note of next action
	before freeing all references to it.

Sat Jan 24 23:52:08 1998  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c: Merge from Foundry branch.
	(TclDebug): New debugging function.
	(gdb_loc): For frames, find address of calling function
	instead of whatever is on the stack (usually the next
	instruction).
	(gdb_listfiles): Takes an optional pathname argument and 
	returns an alphabetized list of basenames of files in the
	path.

Wed Jan 22  10:37:02 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* symfile.c: Define two new hooks for symbol reading: 
	"pre_add_symbol_hook" and "post_add_symbol_hook". These hooks 
	are called before we begin reading symbols, and after we finish.
	(generic_load): Use new symbol reading hooks and get rid of 
	compiler warning.

	* gdbtk.c (gdbtk_init): Add hooks for pre- and post-symbol reading.
	(gdbtk_pre_add_symbol): New function: the pre-add-symbol hook.
	(gdbtk_post_add_symbol): New function: the post-add-symbol hook.
	(find_file_in_dir): New function. Moved the guts of gdb_find_file_command
	into here to allow its use by others.
	(gdb_loc): Use find_file_in_dir to return the real path to the file
	(or "N/A" if we can't find it).

	* configure.in (TIX_LIB_EXT): Define new variable for those special cases
	when TCL_SHLIB_SUFFIX is not enough to specify the dependency.

	* configure: Regenerate.

Fri Jan 23 07:47:06 1998  Fred Fish  <fnf@cygnus.com>

	* Makefile.in (uninstall): Remove installed gdbtcl dir, if one
	was installed.

Thu Jan 15 12:42:28 1998  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdb_immediate_command): New function which does not buffer any
	output. (Contrast to gdb_cmd.)
	(gdbtk_init): Install "gdb_immediate" command into interpreter.

Wed Jan 14 16:38:44 1998  Keith Seitz  <keiths@pizza.cygnus.com>

	* configure.in (--enable-gdbtk): If tcl was built with --enable-shared,
	use TCL_SHLIB_SUFFIX to specify the suffix of the library file so that
	we don't expect to see "libfoo.a" instead of "libfoo.{so,sl, etc}".

	* configure: Regenerate.
	
Wed Dec 31 16:50:26 1998  Keith Seitz  (keiths@onions.cygnus.com)
 
        * gdbtk.c (gdb_actions_command): extract and save step count
        from "while-stepping" command

Tue Dec 16 21:16:42 1997  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (LIBGUI): New variable.
	(GUI_CFLAGS_X): New variable.
	(IDE_CFLAGS): Add $(GUI_CFLAGS_X).
	* configure.in: Add $(LIBGUI) to TCL_LIBS and CONFIG_DEPS.
	* configure: Rebuild.

Wed Dec  10 13:16:45 1997  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c (gdb_get_tracepoint_info): Use info in struct 
	symtab_and_line (not struct tracepoint) so that we get the
	real line info for an address. Arrange data more like
	gdb_get_breakpoint_info.
	(tracepoint_notify): Use info in struct symtab_and_line again.
	(gdbtk_init): Add command "gdb_get_tracepoint_list" into
	interpreter.
	(gdb_get_tracepoint_list): New function that aids the source
	window in displaying tracepoints when the file changes.
	
Fri Dec  5 10:31:23 1997  Keith Seitz  <keiths@pizza.cygnus.com>

	* gdbtk.c (gdbtk_init): Add gdb_find_file into interpreter.
	(gdb_find_file_command): New function which searches source path
	to find the real full filename of a file.

Mon Dec  1 10:19:44 1997  Keith Seitz  <keiths@onions.cygnus.com>

	* gdbtk.c: Move include of "guitcl.h" back out of IDE ifdef.
	(gdbtk_init): Move ide_initialize_paths out of IDE ifdef.

	* configure.in (TCL_LIBS, CONFIG_DEPS): Add IDE libraries for all
	builds.
	(CONFIG_OBS): Remove tracepoint.o, which should always be included.

	* configure: regenerate

	* Makefile.in (install-only): ALWAYS install the new gdbtk
	(REMOTE_OBS): add tracepoint.o
	
Thu Nov 27 09:07:18 1997  Michael Meissner  <meissner@cygnus.com>

	* configure.in ({TCL_LIBS,CONFIG_DEPS}): Don't add IDE libraries
	if not --enable-ide.
	(CONFIG_OBS): Add tracepoint.o to list if --enable-gdbtk.
	* configure: Regenerate.

	* gdbtk.c (gdb_get_breakpoint_info): Add missing filename
	argument.
	(toplevel): Move include of guitcl.h into #ifdef IDE region.
	(gdbtk_init): Move ide_initialize_paths call into #ifdef IDE
	section.

	* Makefile.in (gdbtk.o): Update dependencies.

Wed Nov 26 15:02:43 1997  Keith Seitz  <keiths@onions.cygnus.com>

    	* gdbtk.c (gdb_loc): symtab_to_filename can return NULL.
	(breakpoint_notify): Ditto.
	(gdb_get_breakpoint_info): Ditto.

Wed Nov 26 11:33:09 1997  Keith Seitz  <keiths@onions.cygnus.com>

	Merge in code from Foundry branch:
	
	* Makefile.in (install-only): install the new gdbtk, not the old

	* gdbtk.c (gdbtk_call_command): also run idle hooks for class_trace
	commands
	(gdbtk_init): Add new commands "gdb_get_locals", "gdb_get_args",
	"gdb_get_function", "gdb_get_line", "gdb_get_file",
	"gdb_tracepoint_exists", "gdb_get_tracepoint_info", "gdb_actions",
	and "gdb_prompt".
	(gdb_get_vars_command): New function.
	(gdb_get_line_command): New.
	(gdb_get_file_command): New.
	(gdb_get_function_command): New.
	(gdb_get_tracepoint_info): New.
	(gdbtk_create_tracepoint): New.
	(gdbtk_delete_tracepoint): New.
	(tracepoint_notify): New.
	(tracepoint_exists): New.
	(gdb_actions_command): New.
	(gdb_tracepoint_exists_command): New.
	(gdb_prompt_command): New.

Thu Nov 13 18:15:54 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c: Move include of gdbcore.h to top of file.
	(close_bfds): New static function if _WIN32.
	(gdbtk_readline): Call close_bfds.
	(call_wrapper, tk_command_loop): Likewise.
	(gdb_clear_file): New static function.
	(gdbtk_init): Create gdb_clear_file Tcl command.

Wed Nov 12 14:58:39 1997  Jeff Holcomb  <jeffh@cygnus.com>

	* gdbtk.c: gdbtk_load_hash and ui_load_progress_hook return an
	int result.
	(gdbtk_load_hash): download hash routine returns an int result.

Mon Nov 10 15:11:51 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (gdbtk_init): Call ide_create_shell_execute_command if
	__CYGWIN32__.
	* configure.in: Add -lshell32 to WIN32LIBS on cygwin32.
	* configure: Rebuild.

Sun Nov  9 16:25:34 1997  Tom Tromey  <tromey@cygnus.com>

	* gdbtk.c (gdbtk_init): Run ide_create_help_command.

Tue Oct 28 17:31:47 1997  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdbtk_init): Call ide_create_winprint_command.

Thu Oct 23 15:53:37 1997  Ian Lance Taylor  <ian@cygnus.com>

	* configure.in: Add -lgdi32 to WIN32LIBS when linking gdbtk on
	cygwin32.
	* configure: Rebuild.

Wed Oct 22 21:32:54 1997  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdbtk_init): Create sizebox command on Windows.

Thu Oct  9 14:33:21 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (gdbtk_init): Remove assertion argument from call to
	ide_create_window_register_command.

Wed Oct  1 11:09:52 1997  Tom Tromey  <tromey@cygnus.com>

	* gdbtk.c (gdbtk_init): Pass name of restore interface to
	ide_create_window_register_command.

Fri Sep 26 21:08:22 1997  Keith Seitz  <keiths@pizza.cygnus.com>

	* gdbtk.c (gdbtk_init): Initialize ui_load_progress_hook.

Thu Sep 25 03:05:00 1997  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdb_load_info): New function.  Returns a list
	of section names and sizes for an executable.
	(gdbtk_load_hash): Stub function to call tcl function
	download_hash.

Tue Sep 23 01:29:00 1997  Martin M. Hunt  <hunt@cygnus.com>	

	* gdbtk.c (gdb_get_mem): Fix compiler warning.

Sun Sep 21 00:15:00 1997  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdb_get_mem): Fix problem with ASCII dump.

Tue Sep 16 18:07:17 1997  Martin M. Hunt  <hunt@cygnus.com>	

	* gdbtk.c (gdb_get_mem): New function.  Returns
	a formatted memory dump with optional ASCII dump.

Mon Sep  8 12:48:50 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c: Include ilutk.h if IDE.
	(gdb_confirm_quit, gdb_force_quit): New static functions.
	(gdbtk_init): Add Tcl commands gdb_confirm_quit and
	gdb_force_quit.

Mon Sep  8 03:05:33 1997  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdb_get_breakpoint_info): Now returns the
	function a breakpoint is in.

Fri Sep  5 20:23:58 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (gdbtk_init): Call ide_create_exit_command.

Wed Sep  3 19:39:15 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c: Include guitcl.h.
	(gdbtk_init): Always call ide_initialize_paths.  Set the Tcl
	variable IDE to 1 when using the IDE.  Always try using auto path
	to find main.tcl.
	* Makefile.in (IDE_CFLAGS_X): Always include libide.
	(LIBIDE): New variable.
	(IDE_X): Omit -lide.
	(IDE_DEPS): Omit libide.
	* configure.in: Add LIBIDE to TCL_LIBS and CONFIG_DEPS.
	* configure: Rebuild.

Mon Aug 25 02:28:55 1997  Keith Seitz  <keiths@pizza.cygnus.com>

	* gdbtk.c: (gdb_target_has_inferior) check if inferior_pid is non-zero
	before assuming that the inferior is running.

Mon Aug 25 01:06:48 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (gdbtk_start_timer): Pass third argument to setitimer.
	(gdbtk_stop_timer): Likewise.

Mon Aug 25 00:23:08 1997  Keith Seitz  <keiths@pizza.cygnus.com>

	* gdbtk.c: (gdbtk_init) create new command "gdb_target_has_execution"
	(gdb_target_has_execution_command) new function

Sun Aug 24 20:27:22 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (gdb_loc): If there are no symbols, just bail
	immediately.
	(tk_command_loop): Print errors encountered while running
	gdbtk_tcl_preloop.

Sun Aug 24 13:44:03 1997  Tom Tromey  <tromey@cygnus.com>

	* gdbtk.c (gdbtk_init): Run ide_create_build_command.

Sat Aug 23 21:53:39 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c: If CYGWIN32, include <sys/time.h>.
	(x_fd): Don't define if WINNT.
	(gdbtk_start_timer, gdbtk_stop_timer): New static functions if
	CYGWIN32.
	(gdbtk_wait): Don't set up signal handling if WINNT.  If CYGWIN32,
	call gdbtk_start_timer and gdbtk_stop_timer.
	(gdbtk_init): Don't set up signal handling or make x_fd
	asynchronous if CYGWIN32.

Fri Aug 22 15:23:15 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (error_string_ptr): New static variable.
	(gdbtk_fputs): If result_ptr is NULL, and error_string_ptr is not
	NULL, and we're outputting to stderr, append string to
	error_string_ptr rather than calling gdbtk_tcl_fputs.
	(call_wrapper): Set up error_string_ptr.  Put both error string
	and normal string in Tcl result.

	* gdbtk.c (gdbtk_init): Don't call ide_run_server_init until after
	gdb has initialized.

Thu Aug 21 19:14:38 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c: If _WIN32, include winuser.h.
	(gdbtk_init): If _WIN32, use MessageBox to display an error
	evaluating main.tcl.

Thu Aug 21 00:48:00 1997  Martin M. Hunt  <hunt@pern.cygnus.com>

	* gdbtk.c (gdbtk_init): Add call to ide_run_server_init().
	(gdb_cmd): For the load command, don't buffer the I/O.

Wed Aug 20 11:41:22 1997  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdbtk_query): Chaneg free() call to Tcl_Free().
 	
Tue Aug 19 17:09:19 1997  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (TCL_DEPS, TK_DEPS): New variables.
	(ITCL_DEPS, TIX_DEPS): New variables.
	(IDE_DEPS): New variable.
	(CDEPS): Include @CONFIG_DEPS@.
	* configure.in: Set and substitute CONFIG_DEPS and TIX_DEPS.
	* configure: Rebuild.

Sun Aug 17 00:42:11 1997  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (gdb_listfuncs): New function that returns
	a list of all the functions in a source file.

Tue Aug 12 16:35:21 1997  Ian Lance Taylor  <ian@cygnus.com>

	* Makefile.in (install-only): Install tclIndex if ENABLE_IDE.

Mon Aug 11 10:43:04 1997  Tom Tromey  <tromey@cygnus.com>

	* gdbtk.c (gdbtk_init): Use ide_event_init_from_environment.

Fri Aug  8 15:59:24 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (gdbtk_init): Change gdbtk_lib_tmp and gdbtk_file to be
	dynamically allocated, rather than fixed size.  Pass "gdbtcl" to
	ide_initialize_paths to match installed directory name.  If IDE,
	use auto_path to search for main.tcl.
	* Makefile.in (install-only): If ENABLE_IDE, install from gdbtcl2
	rather than gdbtcl.

	* gdbtk.c (gdbtk_cleanup): New static function.
	(gdbtk_init): Add gdbtk_cleanup as a final cleanup.  Uncomment
	call to ide_initialize_paths.  If we can't initialize the event
	system, set GDBTK_IDE to 0 in the Tcl interpreter.  Create the
	ide_window_register and the ide_window commands.  Initialize tk,
	itcl, and tix after initializing the IDE.

	* configure.in (tixdir): Update for cygwin32 case for Tcl 8.0.
	* configure: Rebuild.

Fri Aug  8 00:13:32 1997  Martin M. Hunt  <hunt@cygnus.com>

	* gdbtk.c (breakpoint_notify): Change buffer size from 100
	to 256 to avoid memory corruption with very long pathnames.

Thu Aug  7 14:08:23 1997  Martin M. Hunt  <hunt@cygnus.com>

	* configure.in: Change required Tix version to 4.1.8.0 .
	* configure: Rebuilt.

Fri Aug  1 15:21:44 1997  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (Tcl_Alloc): Don't provide our own version of this if
	_WIN32.
	(Tcl_Realloc, Tcl_Free): Likewise.
	* configure.in: Check for cygwin32 environment.  Define and
	substitute WIN32LIBS and WIN32LDAPP.  Always set configdir to
	unix; setting it to win was for an old Tcl/Tk configuration
	scheme.
	* aclocal.m4 (CY_AC_LOAD_TKCONFIG): Substitute TK_BUILD_INCLUDES.
	* Makefile.in (TK_CFLAGS): Add @TK_BUILD_INCLUDES@.
	(WIN32LDAPP, WIN32LIBS): Define.
	(CLIBS): Add $(WIN32LIBS).
	(gdb): Use $(WIN32LDAPP).
	* configure: Rebuild.

Tue Jul 22 19:45:37 1997  Martin M. Hunt  <hunt@cygnus.com>

	* configure.in, aclocal.m4: Another fix to find the
	correct Tix library name.

	* configure: Rebuilt.
	
Mon Jul 21 22:24:07 1997  Martin M. Hunt  <hunt@cygnus.com>

	* aclocal.m4: Search for the correct tix library. 

Thu Jul 10 00:02:41 1997  Martin M. Hunt  <hunt@cygnus.com>

	* Makefile.in, configure.in, aclocal.m4: Add Itcl, Tix, and 
	IDE configuration information.

	* gdbtk.c (breakpoint_notify): Send address, linenumber and 
	filename when a breakpoint is set.  Avoids call to bp_info.
 	(gdbtk_init): Call Tcl_FindExecutable(). Add code to handle 
	Itcl, Tix and IDE initialization.

	* configure: Regenerated.

Fri Jun 13 10:28:09 1997  Fred Fish  <fnf@cygnus.com>

	* gdbtk.c (gdbtk_init): Make truth value test explicit.
	Remove unused static variable "Gdbtk_Library".

Sat Jun  7 02:34:19 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

	* gdbtk.c (gdb_get_breakpoint_info):  Add string for new
	enumeration del_at_next_stop to bpdisp array.

Tue Jun  3 15:46:51 1997  Tom Tromey  <tromey@cygnus.com>

	* Makefile.in (LIB_RUNTIME_DIR): New variable.

Wed May  7 19:10:19 1997  Andrew Cagney  <cagney@b1.cygnus.com>

	* gdbtk.c (wrapped_call): New function - make actual call to tk
 	worker function.
	(call_wrapper): Rewrite to use top.c:catch_errors.

	* gdbtk.c (gdb_stop): If No target_stop set quit flag and hope for
 	best.

Mon Apr 21 14:00:08 1997  Doug Evans  <dje@canuck.cygnus.com>

	* gdbtk.c (gdb_disassemble): Store endian-ness in `di'.

Wed Apr 16 12:33:06 1997  Andrew Cagney  <cagney@b1.cygnus.com>

	* Makefile.in (install-only): Make list of gdbtcl files to install
 	explicit - was picking up files such as ChangeLog etc.
	(install-only): Don't blindly create the directory.

Tue Apr  1 15:04:21 1997  Jason Molenda  (crash@godzilla.cygnus.co.jp)

	* configure.in (gdbtcl): Create soft-link for gdbtcl/ directory
 	instead of gdbtk.tcl.

Fri Mar 28 17:04:02 1997  Jason Molenda  (crash@godzilla.cygnus.co.jp)

	* Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
	default, not $(srcdir).

Wed Mar 19 15:16:17 1997  Martin M. Hunt  <hunt@onions.cygnus.com>

	* Makefile.in:  Install gdbtcl dir instead of gdbtk.tcl.
	
	* gdbtk.c: Added some ifdefs for Windows.  Changed GDBTK_FILENAME
	to GDBTK_LIBRARY, which is now a path to search.
	(gdb_path_conv): New function.  Convert Cygwin32 pathname to
	DOS-style pathname.

	* {aclocal.m4,configure.in}: Changes for Windows builds.

	* configure: Rebuilt.

Fri Mar 14 10:01:29 1997  Tom Tromey  <tromey@cygnus.com>

	* configure: Regenerated.
	* configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.

Wed Mar 12 14:29:52 1997  Tom Tromey  <tromey@cygnus.com>

	* gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
	TCL_ALL_EVENTS.

	* configure: Regenerated.
	* configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
	LIBS.

Mon Feb 10 13:50:53 1997  Stu Grossman  (grossman@critters.cygnus.com)

	* gdbtk.c (call_wrapper):  Clear running_now if an error occurs.

Wed Dec 11 18:51:35 1996  Mark Alexander  <marka@cygnus.com>

	* gdbtk.c (gdb_loc): Correct truncation of PC on 64-bit MIPS.

Tue Nov 19 09:26:14 1996  Tom Tromey  <tromey@cygnus.com>

	* gdbtk.c (gdbtk_readline): Fix memory leak.

Mon Nov 18 23:43:05 1996  Tom Tromey  <tromey@cygnus.com>

	Fixes for Tcl 7.6 / Tk 4.2:
	* gdbtk.tcl (apply_filespec): Use tk_getOpenFile.
	Remove old fileselect code.
	* gdbtk.c (Tcl_Alloc): Rename from Tcl_Malloc.

Fri Sep 27 10:25:30 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.tcl (create_copyright_window): Increase timeout from
	15 seconds to 30 seconds.

Wed Sep  4 17:28:40 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* configure configure.in:  Add host *windows* to list of hosts
	that don't support GDBtk.

Fri Aug 23 00:44:57 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.c (gdbtk_init): Check for a DISPLAY env variable and
	gracefully degrade to using command line interface if none is
	found.

Fri Aug  9 12:32:53 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* Makefile.in (LIB_INSTALL_DIR): New macro.
	(TCL): Include @TCL_LD_SEARCH_FLAGS@.

Thu Aug  1 20:35:01 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* gdbtk.c (mainWindow): Deleted.
	(cleanup_init): Don't destroy main window.
	(gdbtk_init): Main window now created by Tk_Init.

	* configure.in: Most X checks now handled automatically by Tk.
	Use new macros to find Tcl/Tk.
	* aclocal.m4: New version for new Tcl/Tk; from Don Libes.
	* config.in, configure: Regenerated.

	* Makefile.in (TCL, TCL_CFLAGS, TK, TK_CFLAGS, X11_CFLAGS,
	X11_LDFLAGS, X11_LIBS): Changed for new Tcl and Tk.

Thu Aug  1 16:12:05 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

	* Makefile.in (gdbtk.tcl): put in $(datadir), not $(libdir).

Fri Jul 26 14:07:37 1996  Ian Lance Taylor  <ian@cygnus.com>

	* gdbtk.c (gdb_disassemble): Initialize di.flavour.

Thu Jul 25 19:41:31 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.c (null_routine): Ditto.
	(gdbtk_flush): Ditto.
 	(gdbtk_fputs): Ditto.
 	(gdbtk_query): Ditto.
	(gdbtk_readline): Ditto.
 	(gdbtk_readline_end): Ditto.
 	(gdb_get_breakpoint_list): Ditto.
	(gdb_get_breakpoint_info): Ditto.
 	(breakpoint_notify): Ditto.
 	(gdbtk_create_breakpoint): Ditto.
	(gdbtk_delete_breakpoint): Ditto.
 	(gdbtk_modify_breakpoint): Ditto.
 	(gdb_loc): Ditto.
 	(gdb_eval): Ditto.
	(gdb_sourcelines): Ditto.
 	(map_arg_registers): Ditto.
 	(get_register_name): Ditto.
 	(gdb_regnames): Ditto.
	(get_register): Ditto.
 	(gdb_fetch_registers): Ditto.
 	(register_changed_p): Ditto.
	(gdb_changed_register_list): Ditto.
 	(gdb_cmd): Ditto.
 	(call_wrapper): Ditto.
 	(gdb_listfiles): Ditto.
	(gdb_stop): Ditto.
 	(gdbtk_dis_asm_read_memory): Ditto.
 	(compare_lines): Ditto.
 	(gdb_disassemble): Ditto.
	(tk_command): Ditto.
 	(cleanup_init): Ditto.
 	(gdbtk_interactive): Ditto.
 	(x_event): Ditto.
 	(gdbtk_wait): Ditto.
	(gdbtk_call_command): Ditto.
 	(tk_command_loop): Ditto.
 	(gdbtk_init): Ditto.

	* gdbtk.c (register_changed_p): Remove unused local variable "buf".

Sat Jul 20 17:46:40 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.tcl (files_command): Reorder the binding tags for
	the listbox widget to avoid referencing the listbox after
	the containing widget has been destroyed by the action of
	a previous binding.

Sat Jul 20 10:09:28 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.tcl (delete_expr): Unset corresponding element of
	expr_update_list when destroying an expression.
	(create_expr_window): Initialize expr_num, delete_expr_num,
	and expr_update_list here when each new expression window
	is created, rather than once at startup.

Mon Jul 15 16:44:05 1996  Stu Grossman  (grossman@critters.cygnus.com)

	* gdbtk.c (gdb_disassemble):  Setup di.mach from
	tm_print_insn_info.mach, and set endian from TARGET_BYTE_ORDER.

Fri Jun 21 11:04:47 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.tcl (create_register_windows): Include missing '$'s.
	Add global declarations for various reg_format_* variables.
	* gdbtk.tcl (populate_register_window): Make initial window one
	line taller to account for new column header line.

Fri Jun 21 09:46:47 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.c (get_register): Support for printing raw formats.
	* gdbtk.tcl: Add hint for using debug_interface.
	(center_window, add_breakpoint_frame, delete_breakpoint_frame):
	Enclose arg in braces for consistency.
	(create_registers_window, populate_reg_window, update_registers):
	Major rewrite to support displaying multiple formats in the register
 	window.
	(init_reg_info): New function.
	(recompute_reg_display_list):  Reset reg_display_list, start
	register display lines at line 2.

Thu Jun 20 08:18:59 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.tcl (gdbtk_tcl_readline_begin): Handle backspace to
	avoid backing up over prompt.  At every input, make sure insert
	point is at least after command start, handle control-u to delete
	current input line.
	(tclsh): Handle backspace to avoid backing up over prompt.  Handle
	control-u to delete current input line.

Wed Jun 19 17:23:38 1996  Geoffrey Noer  <noer@cygnus.com>

	* configure.in: disable gdbtk for *cygwin32* hosted compiles
	* configure: regenerated with autoconf 2.8

Sun May 19 16:49:37 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.c (gdbtk_readline_begin, gdbtk_readline, gdbtk_readline_end):
	New functions.
	(tk_command_loop): Set instream to NULL to enable Tk user interaction.
	(gdbtk_init): Set readline_begin_hook, readline_hook,
	and readline_end_hook.
	* gdbtk.tcl (gdbtk_tcl_readline_begin, gdbtk_tcl_readline,
	gdbtk_tcl_readline_end): New functions.
	(tclsh): Pack scroll bar on right side of window, not left.

Fri May 17 13:54:34 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.tcl (create_command_window): Change a misspelled "get"
	to the intended "cget".
	(delete_line): Fix so it deletes the current line at the
	insertion cursor.

Thu May 16 19:20:29 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.tcl (gdb_prompt): Set this early on.
	(create_command_window): Use gdb_prompt rather than "(gdb) ".
	(gdbtk_tcl_preloop): Proc executed just prior to Tk main loop.
	(tclsh): If an evaluation window already exists, just bring it
	to the front instead of trying to create another.
	* gdbtk.c (tk_command_loop): New function.
	(gdbtk_init): Call tk_command_loop rather than Tk_MainLoop.

Thu May 16 16:16:35 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.tcl (evaluate_tcl_command, tclsh):  New functions that
	implement a tcl evaluation window for gdbtk maintainers to use.

Thu May 16 11:42:58 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* gdbtk.tcl (files_command): Correctly insert list of files into
	listbox widget.

	* gdbtk.tcl (files_command): listbox command no longer accepts
	-geometry.

Wed May 15 16:04:09 1996  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtk.tcl (create_command_window): If command window's buffer
	is disabled, don't execute any of the key bindings.

Mon May 13 13:43:25 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.c (tk_command): Catch case where no argument is given
	since this will cause the tcl interpreter to dump core.

Wed May  8 20:33:24 1996  Fred Fish  <fnf@cygnus.com>

	* gdbtk.c: Fix a couple of misspellings.

Thu May  2 19:17:49 1996  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtk.tcl (debug_interface): New global, use to aid debugging.
	(insert_breakpoint_tag, delete_breakpoint_tag): Fix range.
	(file_popup_menu): Delete, never used.
	(listing_window_popup): Rename from listing_window_button_1,
	remove breakpoint toggling code.
	(toggle_breakpoint): New procedure.
	(create_file_win): Bind popup menu to button 2, toggle breakpoints
 	with button 1 in breakpoint area, add display of tagged areas if
 	debugging on.

Fri Apr  5 13:44:40 1996  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtk.c (running_now): New global variable.
	(gdb_cmd): Test it before executing any command.
	(gdbtk_call_command): Set it when inferior is running.
	* gdbtk.tcl (gdbtk_tcl_busy, gdbtk_tcl_idle): Enable and
	disable interaction with command window's text appropriately.

Fri Apr  5 13:25:42 1996  Michael Meissner  <meissner@tiktok.cygnus.com>

	* gdbtk.c (SIOCSPGRP, linux): If on Linux, undef SIOCSPGRP, since
	some versions of the kernel don't support it.

Tue Feb  6 16:31:25 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* gdbtk.tcl (create_file_win): Eliminate text widget B1 binding so
	double-clicking will work again.
	(create_asm_win): Put "break" at end of all B1 bindings.
	(create_file_win): Lower "sel" tag, don't raise it.
	(ensure_line_visible): New proc.
	(update_listing, update_assembly): Use it.
	(create_copyright_window): Destroy window on Leave event.
	(create_command_window): Put "break" at end of all B2 bindings.

Wed Jan 24 15:28:41 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* gdbtk.tcl, gdbtk.c: Updated copyrights.

	* configure.in: Look for -ldl or -ldld when using Tcl 7.5 or
	greater.
	* configure: Rebuilt.

Tue Jan 23 09:00:48 1996  Doug Evans  <dje@charmed.cygnus.com>

	* gdbtk.c (gdb_disassemble): Pass fprintf_unfiltered to
 	INIT_DISASSEMBLE_INFO.

Mon Jan 15 09:58:41 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* gdbtk.tcl (create_expr_window): Many changes to update GUI.
	(add_expr): Changes from create_expr_window.
	(create_command_window): Set focus.
	(delete_expr): Rewrote.
	(expr_update_button): New proc.
	(add_expr): Put bindings on FocusIn, FocusOut.
	Don't allow .file_popup to be torn off.

Fri Jan 12 09:36:17 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* gdbtk.tcl (gdbtk_tcl_query): Swap Yes and No buttons.
	(update_listing): Use lassign.  Use "see" to scroll.  Don't need
	screen_top, screen_bot, screen_height.
	(update_assembly): Use "see" to scroll.
	(textscrollproc): Removed.
	(create_file_win): Don't use textscrollproc.
	(asmscrollproc): Removed.
	(create_asm_window): Don't use asmscrollproc.
	(create_asm_win): Ditto.
	(screen_height, screen_top, screen_bot): Removed.
	(run_editor): New proc.
	(build_framework): Use it.
	(create_file_win, create_source_window): Don't use textscrollproc.
	(create_breakpoints_window): Set -xscrollcommand on canvas.
	(not_implemented_yet): Default button is 0.
	(delete_char): Don't use tk_textBackspace.
	(create_command_window): Allow Tk bindings to fire after deleting
	character.
	(create_command_window): Make Delete delete left, not right.

Thu Jan 11 10:08:14 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* gdbtk.tcl (FSBox): Don't use tk_listboxSingleSelect.

	Changes in sync with expect:
	* configure.in (ENABLE_GDBTK): Use CY_AC_PATH_TCL and
	CY_AC_PATH_TK.
	* aclocal.m4: Replaced with version from expect.
	* configure: Regenerated.

Wed Jan 10 09:07:22 1996  Tom Tromey  <tromey@creche.cygnus.com>

	* gdbtk.tcl (gdbtk_tcl_fputs, gdbtk_tcl_fputs_error,
	gdbtk_tcl_flush): Use "see", not "yview".
	(gdbtk_tcl_query): Use questhead bitmap.
	various: Always wrap condition of 'if' in {...}.
	(add_breakpoint_frame): Set -value on radiobuttons.
	(lassign): New proc.
	(add_breakpoint_frame): Use lassign, not series of assignments.
	(decr): Made faster.
	(interactive_cmd): Use "see", not "yview".
	(not_implemented_yet): Use warning bitmap.
	(update_expr): Don't allow $expr to be evalled by Tcl.
	(create_expr_window): Don't use "focus".
	(delete_char, delete_line): Define globally.
	(delete_line, delete_char, create_command_window, update_autocmd,
	build_framework, create_asm_win, create_file_win): Use "see", not
	"yview".
	(create_copyright_window, center_window, bind_widget_after_class):
	New procs.
	(FSBox,create_command_window, create_autocmd_window): Binding
	changes for Tk4.
	(textscrollproc): Define globally.
	(build_framework): tk_menuBar no longer needed.  Keys Prior, Next,
	Home, End, Up, and Down are all defined by Tk.
	(apply_filespec): Use error bitmap in dialog.
	(files_command): Don't use tk_listboxSingleSelect.
	(files_command): Don't use "uniq" to remove duplicates from a
	list.
	(update_assembly): Use lassign.
	(create_asm_win): Removed redundant bindings.
	(listing_window_button_1, file_popup_menu): Use tk_popup.
	(ButtonRelease-1 binding): Just remove tag from window; rest
	handled by Tk.

	* gdbtk.c (gdbtk_query): Use Tcl_Merge to provide quoting.
	(call_wrapper): Use Tcl_Eval, not Tcl_VarEval.
	(gdbtk_call_command): Ditto.

Thu Jan  4 16:04:54 1996  Stu Grossman  (grossman@cygnus.com)

	* configure configure.in:  Make --enable-gdbtk be the default.

Thu Dec 28 15:10:49 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* README.GDBTK: Polish introductory paragraph.

Mon Oct 16 11:27:06 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (gdb_disassemble):  Use fprintf_unfiltered instead of
	fprintf_filtered.

Tue Oct 10 15:26:39 1995  Fred Fish  <fnf@cygnus.com>

	* README.GDBTK: Updated for version 4.15.
	
Sat Aug 19 17:20:22 1995  Michael Tiemann  <tiemann@axon.cygnus.com>

	* gdbtk.tcl: ENABLE comes back as "1" or "0", not "enable" or
	"disable".
	Also, wire up the breakpoint window so that it can be demo'd.

Tue Aug  1 11:44:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* gdbtk.c: Include "gdb_string.h" instead of <string.h>.

Tue Jun 20 10:19:40 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c:  Add functions Tcl_Malloc, Tcl_Realloc, and Tcl_Free.

	* gdbtk.tcl (add_breakpoint_frame):  Add more fields.
	* (create_file_win create_asm_win build_framework):  Create null
	bindings for meta keys to keep window from dropping down to
	insertion point when meta is pressed by itself.  New bindings:
	   Up/Down - Scroll up/down one line at a time
	   Next/Prior - Scroll up/down one page at a time
	   Home/End - Warp to current pc/end of file
	* (build_framework):  Turn on breakpoint menu.
	* (create_command_window):  Implement tab completion.  Add binding
	for ^C to stop target.

Fri May 19 06:15:40 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>

	* gdbtk.c: Conditionalize use of stdarg rather than varargs on
 	ANSI_PROTOTYPES not __STDC__; it must match the definition of
 	PARAMS.

Thu May 18 15:58:46 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

	* gdbtk.c (gdbtk_query): Use stdarg.h macros when compiling with
 	an ANSI compiler.

Sat Apr 15 13:52:24 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtk.c (gdb_disassemble): Read from inferior if connected
	to a VxWorks target.

Fri Apr 14 10:18:20 1995  Stu Grossman  (grossman@cygnus.com)

	* README.GDBTK:  New file.  Contains the obvious.

Tue Apr 11 11:07:12 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but
	F_SETOWN is, use that.

Thu Apr  6 17:00:46 1995  Michael Meissner  <meissner@tiktok.cygnus.com>

	* Makefile.in (X11_INCLUDES): Define as empty.
	(X11_CFLAGS): Define as including $(X11_INCLUDES).
	(X11_LIB_SWITCHES): Define as empty.
	(X11_LIBS): Define as -lX11.

	* configure.in (enable_gdbtk): If gdbtk, support the --x-includes
	and --x-libraries switches, setting the X11_INCLUDES and
	X11_LIB_SWITCHES respectively.  Instead of using a hardcoded -lX11
	in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables.

	* gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use
	it.  This means that the stop button doesn't work, but is better
	than nothing.

Wed Mar 29 17:09:29 1995  Stu Grossman  (grossman@cygnus.com)

	* Makefile.in (gdbtk.o):  Use X11_CFLAGS to provide alternate
	locations (per-host) for X11 include files.
	* config/pa/hppahpux.mh (XM_CLIBS):  Add -L/usr/lib/X11R5 to force
	the use of R5 libs.
	(X11_CFLAGS):  Add this to indicate the locs
	of the R5 include files.

Wed Mar  8 16:12:21 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (gdb_get_breakpoint_info):  Return error if breakpoint
	type is not bp_breakpoint.

Tue Feb 14 17:16:41 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c: Ditto.
	* gdbtk.c: General cleanups, get rid of unused variables.  Redo
	handling of stdout/stderr to just return output as the result of
	the tcl command that caused the output.  Cleanup -Wall stuff.
	* (breakpoint_notify):  Now returns just action and breakpoint
	number.
	* (gdb_get_breakpoint_list):  New routine.  Does the obvious.
	* (gdb_get_breakpoint_info):  Mostly derived from the old
	breakpoint_notify, but returns lots more info.
	* (dsprintf_append_element):  Helper routine, works like printf,
	but appends a tcl element onto the specified DString.  Good for
	building up lists as return values.
	* (gdbtk_enable/disable_breakpoint):  Go away.  Replaced with
	gdbtk_modify_breakpoint.
	* (*many routines*):  Use new result protocol.
	* (call_wrapper):  Make sure that recursive calls don't trash results.
	* gdbtk.tcl:  New windows, autocmd, and breakpoints.
	* (gdbtk_tcl_fputs):  Don't use $current_output_win redirection
	anymore.  It's not needed (in fact, this routine may not be needed
	anymore).
	* (gdbtk_tcl_breakpoint):  Change to reflect new breakpoint
	notification protocol.
	* (gdbtk_tcl_busy gdbtk_tcl_idle):  Straighten out buttons, remove
	catches.
	* (interactive_cmd):  Use this wrapper around button invocations
	of many commands.  This will catch errors and put the results into
	the command window.  It also updates all the other windows.
	* Also, change reliefs of most things to sunken.  This actually
	looks better.
	* (create_file_win):  Fix margin binding to allow breakpoints to
	work again.
	* (create_asm_win):  Use return value of gdb_disassemble instead
	of implicit I/O to the command window.	
	* (create_command_window):  Use new result protocol to get output
	from commands.

Sun Feb  5 20:32:44 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

	* gdbtk.c (gdb_disassemble): Deference pointer to function before
	calling it (pre-ANSI compilers generally require this).

Fri Feb  3 11:19:20 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (gdb_disassemble): Get rid of
	dis_asm_read_memory_hook.  We can now call the disassemblers
	directly and have no need for this hook anymore.

Mon Jan 30 17:34:24 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.tcl (create_file_win):  Disable old popup menu for source
	window.

Wed Jan 25 18:23:46 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (gdbtk_init):  Prevent segfault when gdbtk.tcl can't be
	found.
	* gdbtk.tcl:  Initialize expr_update_list() to prevent errors when
	popping up expression window for the first time.

Tue Jan 24 12:10:28 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.tcl (create_registers_window):  Work around a radiobutton
	widget bug to make Options|Natural button work.

	* gdbtk.c (gdb_disassemble):  Fix problem with source+assembly and
	g++ caused by out-of-order pc's.
	* gdbtk.tcl (files_command):  Remove duplicate file names.  Also,
	add scrollbar.

Mon Jan 23 17:21:09 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.tcl:  Take .gdbtkinit if it exists.  Makes gdbtk match the
	doc!

Thu Jan 12 15:02:40 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c, gdbtk.tcl:  Update/add copyright.
	* gdbtk.tcl (build_framework):  Several fixes for filespec widget,
	including dismiss button, and better error handling.
	* (create_command_win):  Bind button 2 to retrieve selection.

Wed Jan 11 17:06:55 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.tcl:  Add button to control mixed source disassembly.
	Use text widgets in expr window.  The give me more control over
	layout.
	Add auto-updating of exprs in expression window.
	Handle expressions out of scope a bit better.
	Make selected window pop up to the top when invoked via the
	menubar.
	Make copyright message have raised relief.

	* gdbtk.c (gdbtk_init):  Improve handling for errors in gdbtk.tcl
	during startup.

Thu Jan  5 17:38:29 1995  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (finish_saving_output):  Don't do anything if not saving
	output.
	* (breakpoint_notify):  Don't send null filename to tcl.
	* (gdb_eval):  New tcl command to eval an expression.
	* (gdb_disassemble):  New tcl command to do disassembly.  This
	allows tcl code to choose between exec file and target memeory,
	and can also do mixed source and assembly.
	* (gdbtk_init):  Move reading of gdbtk.tcl to the end to make sure
	that more of the environment is set up.  Also, create link between
	gdb and tcl vars disassemble{-_}from{-_}exec.

	* gdbtk.tcl:  New expression window support.
	* Make assembly window be 80 columns wide.
	* Use new disassembly method.  Add menu items to select
	disassembly from exec file or target.
	* Change View menubar item to Options.

	* Get rid of Stack, Breakpoints, Signals, and Variables Windows,
	since they don't exist yet.

	* Pop up a copyright window on startup.

Wed Jan  4 19:49:10 1995  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtk.tcl (build_framework): Add standard commands menu, more
	windows to standard windows menu.
	(not_implemented_yet): Clarify message.

Fri Dec 30 15:49:00 1994  Stan Shebs  <shebs@andros.cygnus.com>

	* gdbtk.tcl (FSBox): New proc, File Selection Box code from exmh.
	(not_implemented_yet): New proc.
	(build_framework): Add various file commands to file menu.

Fri Dec 23 16:18:50 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (gdbtk_wait gdbtk_init):  Portability improvements for
	SIGIO handling.

Mon Dec 19 09:55:47 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.tcl (update_assembly):  Force update to make sure that pc
	is visible when creating new assembly windows.

Sun Dec 18 23:31:20 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (gdbtk_wait gdbtk_init):  Use different method of
	enabling I/O interrupts for SVR4 (streams).
	* (start_saving_output save_output get_saved_output
	finish_saving_output flush_holdbuf gdbtk_flush gdbtk_fputs
	gdbtk_init):
	Totally revamp to use TCLs dynamic string functions.  Also, quote
	all data passed back to TCL to prevent errors with unmatched
	braces, odd characters, etc...  This fixes several wierd problems
	with outputting strings containing unmatched braces.
	* (breakpoint_notify gdb_loc):  Use long hex format to output
	addresses of breakpoints and PCs.  This fixes some Alpha problems.
	* (breakpoint_notify):  Add stream arg to call to gdbtk_fputs.
	* (gdb_listfiles):  Also, go through the symtabs when looking for
	files.  This makes xcoff work (sort of), but probably breaks
	something else.
	* (gdb_stop):  Return TCL_OK instead of nothing.  This fixes odd
	TCL errors when hitting stop button.
	* (tk_command):  Don't pass interp->result on to Tcl_{Var}Eval, as
	that will trash the result.  strdup the result instead and pass
	that on.  Improve error handling as well.

	* gdbtk.tcl (gdbtk_tcl_flush):  Use global def of
	current_output_win.  Makes flushing actually work!
	* (asm_win_name create_asm_win update_assembly):  Bunch of fixes
	to make assembly windows stop flashing when loading a new file.
	* (gdbtk_tcl_busy gdbtk_tcl_idle):  Use catch to prevent gdb_cmd
	errors from losing control.
	* (create_source_window):  Add source file selection to View menu.
	* (create_command_window (<Key-Return> binding):  Quote text fed
	into gdb_cmd to prevent eval errors.

Thu Dec 15 16:40:10 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c: Improve mechanism for capturing output values.
	(full_filename): Remove.
	(gdb_cmd call_wrapper gdbtk_init): Protect all calls from tcl land
	with call_wrapper.  This prevents longjmps (usually via error())
	from jumping out of tcl/tk and leaving things in an indeterminate
	state.
	(gdbtk_fputs): Differentiate stdout from stderr when passing text
	into tcl land.
	* gdbtk.tcl: New view option to disable line numbers.  Put catch
	around most uses of gdb_cmd.  Add update button to reg config
	window.  Stop doing immediate updates when selecting registers.
	Change register view values into checkbuttons.

Mon Dec 12 16:59:29 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.tcl (reg_config_menu create_registers_window
	recompute_reg_display_list):  Use array instead of individual vars
	for register display list.
	* (recompute_reg_display_list update_registers):  Fix bug with not
	displaying all registers.

Mon Dec 12 12:22:21 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c:  New tcl commands:  gdb_fetch_registers,
	gdb_changed_register_list, and gdb_regnames.
	* gdbtk.tcl:  Use monochrome color model for now.
	* (delete_breakpoint_tag create_file_win):  Add breakdot support.
	* (create_file_win create_asm_win update_listing build_framework
	create_source_window create_command_window):  Re-org window
	creation to give all windows consistent look and feel.
	* (update_listing update_asm):  Change pc pointer to '->'.
	* (registers_command reg_config_menu create_registers_window
	populate_reg_window update_registers):  Revamp register window.
	Allow selection of registers to be displayed.  Highlight changed
	registers.

Mon Nov 28 09:17:20 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.tcl (build_framework):  Fix bug with setting window titles.

	* gdbtk.tcl (build_framework):  Add "Report bug" to help menu.

	* gdbtk.tcl:  Re-arrange windows using new, consistent layout. Clean
	up lots of code and centralize framework initialization.

Wed Nov 16 15:28:29 1994  Rob Savoye  (rob@cygnus.com)

	* Makefile.in: Fix the test for installing gdbtk.

Mon Nov 14 08:51:29 1994  Stu Grossman  (grossman@cygnus.com)

	* Makefile.in:  Install gdbtk.tcl.
	* configure.in:  Add ENABLE_GDBTK flag.
	* gdbtk.c (gdb_sourcelines):  Returns list of source lines
	containing code.  (gdb_regnames):  Returns list of register names.

Thu Nov  3 14:25:24 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (gdb_stop):  Switch to target_stop().

Tue Nov  1 16:41:12 1994  Stu Grossman  (grossman@cygnus.com)

	* Makefile.in:  Use $(objdir)/tcl and $(objdir)/tk if they are
	available.
	* configure.in (ENABLE_CLIBS):  Use $(TCL) and $(TK) instead of
	-ltcl and -ltk.
	* gdbtk.c:  Get rid of lots of unnecessary #includes.
	* (gdbtk_init):  Use ConnectionNumber macro instead of referencing
	Display structure directly.
	* gdbtk.tcl:  Change exit button to quit button.

Wed Oct 26 15:41:07 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c: Change sense and name of no_windows variable.  Now
 	called use_windows, and defaults to off (for compatibility).

Thu Oct 20 17:35:45 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (gdb_cmd):  Force GUI into idle mode when errors occur.
	* (gdb_stop):  New tcl command to stop the target process.
	* (x_event, gdbtk_wait):  Allow GUI to interrupt gdb out of target
	waits.
	* (gdbtk_call_command):  Wrapper around command processing to
	alert GUI of target state changes.
	* (gdbtk_init):  Get the fd of X server for doing async
	notification of X events (via x_event).  Setup new hooks.
	* gdbtk.tcl:  Add scrollbars to assembly and command windows.
	* Change window foreground & background colors.
	* Create margin tag for breakpoints in source and assembly windows.
	* Add new routines to be invoked when target state changes to/from
	idle.
	* Add start of expression window.
	* Change bindings of mouse button 1 in assembly and source window
	to just set or clear breakpoints when in the margin tag.
	* Change shape of register window to be more vertical to better
	reflect its contents.
	* Add stop button.
	* Cleanup some code around command window bindings.

Sat Sep 17 17:05:14 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.tcl:  Let ^U delete lines in the command window.

Fri Sep 16 15:40:34 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c:  Replace calls to full_filename with symtab_to_filename.  
	* gdbtk.tcl:  New routine pc_to_line replaces in line code.  New
	routine decr replaces in line code.
	* (create_file_win):  Use catch to handle open failures more
	elegantly.  Also, create special window to display file open
	failure message.  Move opening of file prior to creation of text
	widget.
	* (create_asm_win):  Add PC as argument.  We now base disassembly
	on PC instead of function name, since function names can be
	ambiguous (usually seen with shared libs).  Also, use catch to
	simplify code where we don't care about failures.

Wed Sep 14 00:55:26 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.tcl:  Add ref counts to breakpoint tags.
	* Put quotes around function name in disassemble command to better
	handle assembler names containing `.'.
	* Make pclist element 0 be filler to avoid off-by-one problem with
	line numbers.
	* Set names of top-level windows.
	* Add register display window.
	* Add PC to label of assembly window.

Tue Sep 13 08:59:04 1994  Stu Grossman  (grossman@cygnus.com)

	* gdbtk.c (gdbtk_flush gdbtk_fputs):  Buffer up output to make
	disassembly more efficient.
	* (breakpoint_notify):  Include pc in gdbtk_tcl_breakpoint
	callback.
	* (gdb_loc):  Include pc in return value.  Also, return function
	name if arg was specified.
	* (gdb_cmd_stub):  Call gdb_flush to drain internal GDB buffers
	after command completes.
	* (gdbtk_init):  Improve error handling.

	* gdbtk.tcl:  Add lots of comments.  Clean up code.
	* (gdbtk_tcl_fputs):  Make output window redirectable.
	* Add assembly window, and breapoint support.
	* Make button 1 in margin toggle breakpoints.
	* Use stippling to indicate breakpoint disabling.

Fri Sep  2 19:11:40 1994  Stu Grossman  (grossman@cygnus.com)

	* configure.in: Don't symlink to gdbtk.tcl if it's already there.

Thu Jul 28 14:37:36 1994  Stu Grossman  (grossman@cygnus.com)

	Support for TK GUI.
	* Makefile.in:  Add rule for gdbtk.o.
	* configure.in:  Add support for --enable-gdbtk.
	* gdbtk.c:  New file.  Contains support routines for TK interface.
	* gdbtk.tcl:  New file.  Implements GUI policy.


Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: