path: root/itcl/iwidgets3.0.0/doc/tabnotebook.n

'\"
'\" Copyright (c) 1995 DSC Technologies Corporation
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
'\" @(#) tabnotebook.n
'/"
.so man.macros
.HS tabnotebook iwid
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
tabnotebook \- create and manipulate tabnotebook widgets
.SH SYNOPSIS
\fBtabnotebook\fR \fIpathName\fR? \fIoptions\fR?
.SH "INHERITANCE"
itk::Widget <- tabnotebook
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 4c 8c 12c
\fBbackground\fR	\fBdisabledForeground\fR	\fBforeground\fR	\fBscrollCommand\fR
\fBcursor\fR	\fBfont\fR	\fBheight\fR	\fBwidth\fR
.fi
.LP
See the "options" manual entry for details on the standard options.
.SH "WIDGET-SPECIFIC OPTIONS"
.LP
.nf
Name:	\fBangle\fR
Class:	\fBAngle\fR
Command-Line Switch:	\fB-angle\fR
.fi
.IP
Specifes the angle of slope from the inner edge to the outer edge of the tab. 
An angle of 0 specifies square tabs. Valid ranges are 0 to 45 degrees 
inclusive. Default is 15 degrees. If \fBtabPos\fR is e or w, this option 
is ignored.
.LP
.nf
Name:	\fBauto\fR
Class:	\fBAuto\fR
Command-Line Switch:	\fB-auto\fR
.fi
.IP
Specifies whether to use the automatic packing/unpacking algorithm of the 
notebook. A value of true indicates that page frames will be unpacked and 
packed acoording to the algorithm described in the select command. A value 
of \fBfalse\fR leaves the current page packed and 
subsequent \fBselects\fR, \fBnext\fR, or \fBprevious\fR commands do not 
switch pages automatically. In either case the page's associated 
command (see the \fBadd\fR command's description of the command option) is 
invoked. The value may have any of the forms accepted by 
the \fBTcl_GetBoolean\fR, such as \fBtrue\fR, \fBfalse\fR, \fB0\fR, 
\fB1\fR, \fByes\fR, or \fBno\fR.
.LP
.nf
Name:	\fBbackdrop\fR
Class:	\fBBackdrop\fR
Command-Line Switch:	\fB-backdrop\fR
.fi
.IP
Specifies a background color to use when filling in the backdrop area 
behind the tabs.
.LP
.nf
Name:	\fBbackground\fR
Class:	\fBBackground\fR
Command-Line Switch:	\fB-background\fR
.fi
.IP
Specifies a background color to use for displaying a page and its associated 
tab. This can be thought of as the selected tab background color, since the 
tab associated with the selected page is the selected tab.
.LP
.nf
Name:	\fBbevelAmount\fR
Class:	\fBBevelAmount\fR
Command-Line Switch:	\fB-bevelamount\fR
.fi
.IP
Specifes the size of tab corners. A value of 0 with \fBangle\fR set to 
0 results in square tabs. A \fBbevelAmount\fR of 4, means that the tab will 
be drawn with angled corners that cut in 4 pixels from the edge of 
the tab. The default is 0.
.LP
.nf
Name:	\fBborderWidth\fR
Class:	\fBBorderWidth\fR
Command-Line Switch:	\fB-borderwidth\fR
.fi
.IP
Specifies the width of shadowed border to place around the notebook area of 
the tabnotebook. The default value is 2.
.LP
.nf
Name:	\fBdisabledForeground\fR
Class:	\fBDisabledForeground\fR
Command-Line Switch:	\fB-disabledforeground\fR
.fi
.IP
Specifies a foreground color to use for displaying a tab's label when 
its \fBstate\fR is disabled.
.LP
.nf
Name:	\fBequalTabs\fR
Class:	\fBEqualTabs\fR
Command-Line Switch:	\fB-equaltabs\fR
.fi
.IP
Specifies whether to force tabs to be equal sized or not. A value 
of \fBtrue\fR means constrain tabs to be equal sized. A value 
of \fBfalse\fR allows each tab to size based on the text label size. The 
value may have any of the forms accepted by the \fBTcl_GetBoolean\fR, such 
as \fBtrue\fR, \fBfalse\fR, \fB0\fR, \fB1\fR, \fByes\fR, or \fBno\fR.
.IP
For horizontally positioned tabs (\fBtabpos\fR is either \fBs\fR or \fBn\fR),
\fBtrue\fR forces all tabs to be equal width (the width being equal to 
the longest label plus any \fBpadX\fR specified). Horizontal tabs are 
always equal in height. 
.IP
For vertically positioned tabs (\fBtabpos\fR is either \fBw\fR or \fBe\fR), 
\fBtrue\fR forces all tabs to be equal height (the height being equal to the 
height of the label with the largest font). Vertically oriented tabs 
are always equal in width.
.LP
.nf
Name:	\fBforeground\fR
Class:	\fBForeground\fR
Command-Line Switch:	\fB-foreground\fR
.fi
.IP
Specifies a foreground color to use for displaying a page and its associated 
tab label. This can be thought of as the selected tab background color, 
since the tab associated with the selected page is the selected tab.
.LP
.nf
Name:	\fBgap\fR
Class:	\fBGap\fR
Command-Line Switch:	\fB-gap\fR
.fi
.IP
Specifies the amount of pixel space to place between each tab. Value may 
be any pixel offset value. In addition, a special keyword \fBoverlap\fR 
can be used as the value to achieve a standard overlap of tabs. This value 
may have any of the forms acceptable to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBmargin\fR
Class:	\fBMargin\fR
Command-Line Switch:	\fB-Bmargin\fR
.fi
.IP
Specifies the amount of space to place between the outside edge of the 
tabnotebook and the outside edge of its tabs. If \fBtabPos\fR is \fBs\fR, 
this is the amount of space between the bottom edge of the tabnotebook and 
the bottom edge of the set of tabs. If \fBtabPos\fR is \fBn\fR, this is 
the amount of space between the top edge of the tabnotebook and the top 
edge of the set of tabs. If \fBtabPos\fR is \fBe\fR, this is the amount of 
space between the right edge of the tabnotebook and the right edge of the 
set of tabs. If \fBtabPos\fR is \fBw\fR, this is the amount of space 
between the left edge of the tabnotebook and the left edge of the set 
of tabs. This value may have any of the forms acceptable to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBpadX\fR
Class:	\fBPadX\fR
Command-Line Switch:	\fB-padx\fR
.fi
.IP
Specifies a non-negative value indicating how much extra space to request 
for a tab around its label in the X-direction. When computing how large 
a window it needs, the tab will add this amount to the width it would 
normally need The tab will end up with extra internal space to the left 
and right of its text label. This value may have any of the forms acceptable 
to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBpadY\fR
Class:	\fBPadY\fR
Command-Line Switch:	\fB-pady\fR
.fi
.IP
Specifies a non-negative value indicating how much extra space to request for 
a tab around its label in the Y-direction. When computing how large a 
window it needs, the tab will add this amount to the height it would normally 
need The tab will end up with extra internal space to the top and bottom of 
its text label. This value may have any of the forms acceptable 
to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBraiseSelect\fR
Class:	\fBRaiseSelect\fR
Command-Line Switch:	\fB-raiseselect\fR
.fi
.IP
Specifes whether to slightly raise the selected tab from the rest of the 
tabs. The selected tab is drawn 2 pixels closer to the outside of the 
tabnotebook than the unselected tabs. A value of \fBtrue\fR says to 
raise selected tabs, a value of \fBfalse\fR turns this feature off. The 
default is \fBfalse\fR. The value may have any of the forms accepted 
by the \fBTcl_GetBoolean\fR, such as \fBtrue\fR, \fBfalse\fR, \fB0\fR, 
\fB1\fR, \fByes\fR, or \fBno\fR.
.LP
.nf
Name:	\fBstart\fR
Class:	\fBStart\fR
Command-Line Switch:	\fB-start\fR
.fi
.IP
Specifies the amount of space to place between the left or top edge of the 
tabnotebook and the starting edge of its tabs. For horizontally positioned 
tabs, this is the amount of space between the left edge of the notebook and 
the left edge of the first tab. For vertically positioned tabs, this is the 
amount of space between the top of the notebook and the top of the first 
tab. This value may change if the user performs a MButton-2 scroll on the 
tabs. This value may have any of the forms acceptable to \fBTk_GetPixels\fR.
.LP
.nf
Name:	\fBstate\fR
Class:	\fBState\fR
Command-Line Switch:	\fB-state\fR
.fi
.IP
Sets the active state of the tabnotebook. Specifying \fBnormal\fR allows 
all pages to be selectable. Specifying \fBdisabled\fR disables the notebook 
causing all page tabs to be drawn in the \fBdisabledForeground\fR color.
.LP
.nf
Name:	\fBtabBackground\fR
Class:	\fBTabBackground\fR
Command-Line Switch:	\fB-tabbackground\fR
.fi
.IP
Specifies a background color to use for displaying tab backgrounds when 
they are in their unselected state. This is the background associated with 
tabs on all pages other than the selected page.
.LP
.nf
Name:	\fBtabBorders\fR
Class:	\fBTabBorders\fR
Command-Line Switch:	\fB-tabborders\fR
.fi
.IP
Specifies whether to draw the borders of tabs that are not selected. 
Specifying \fBtrue\fR (the default) draws these borders, 
specifying \fBfalse\fR draws only the border around the selected tab. The 
value may have any of the forms accepted by the \fBTcl_GetBoolean\fR, 
such as \fBtrue\fR, \fBfalse\fR, \fB0\fR, \fB1\fR,\fB yes\fR, or \fBno\fR.
.LP
.nf
Name:	\fBtabForeground\fR
Class:	\fBTabForeground\fR
Command-Line Switch:	\fB-tabforeground\fR
.fi
.IP
Specifies a foreground color to use for displaying tab labels when they 
are in their unselected state. This is the foreground associated with tabs 
on all pages other than the selected page.
.LP
.nf
Name:	\fBtabPos\fR
Class:	\fBTabPos\fR
Command-Line Switch:	\fB-tabpos\fR
.fi
.IP
Specifies the location of the set of tabs in relation to the notebook 
area. Must be n, s, e, or w. Defaults to s.
.BE
.SH DESCRIPTION
.PP
The \fBtabnotebook\fR command creates a new window (given by the pathName 
argument) and makes it into a \fBtabnotebook\fR widget. Additional options, 
described above may be specified on the command line or in the option 
database to configure aspects of the tabnotebook such as its colors, font, 
and text. The tabnotebook command returns its pathName argument. At the 
time this command is invoked, there must not exist a window named 
pathName, but pathName's parent must exist.
.PP
A \fBtabnotebook\fR is a widget that contains a set of tabbed pages. It 
displays one page from the set as the selected page. A Tab displays the 
label for the page to which it is attached and serves as a page 
selector. When a page's tab is selected, the page's contents are displayed 
in the page area. The selected tab has a three-dimensional effect to make 
it appear to float above the other tabs. The tabs are displayed as a group 
along either the left, top, right, or bottom edge. When first created a 
tabnotebook has no pages. Pages may be added or deleted using widget 
commands described below.
.PP
A special option may be provided to the tabnotebook. The \fB-auto\fR 
option specifies whether the tabnotebook will automatically handle the 
unpacking and packing of pages when pages are selected. A value of 
true signifies that the notebook will automatically manage it. This is the 
default value. A value of false signifies the notebook will not perform 
automatic switching of pages.
.SH NOTEBOOK PAGES
A tabnotebook's pages area contains a single child site frame. When a 
new page is created it is a child of this frame. The page's child site 
frame serves as a geometry container for applications to pack widgets 
into. It is this frame that is automatically unpacked or packed when 
the auto option is true. This creates the effect of one page being visible 
at a time. When a new page is selected, the previously selected page's 
child site frame is automatically unpacked from the tabnotebook's child 
site frame and the newly selected page's child site is packed into the 
tabnotebook's child site frame.
.PP
However, sometimes it is desirable to handle page changes in a different 
manner. By specifying the \fBauto\fR option as \fBfalse\fR, child site 
packing can be disabled and done differently. For example, all widgets 
might be packed into the first page's child site \fBframe\fR. Then when 
a new page is selected, the application can reconfigure the widgets 
and give the appearance that the page was flipped.
.PP
In both cases the command option for a page specifies a Tcl Command 
to execute when the page is selected. In the case of \fBauto\fR 
being \fBtrue\fR, it is between the unpacking of the previously selected 
page and the packing of the newly selected page.
.PP
Notebook pages can also be controlled with scroll bars or other widgets 
that obey the \fBscrollcommand\fR protocol. By giving a scrollbar 
a \fB-command\fR to call the tabnotebook's \fBselect\fR method, the 
tabnotebook can be controlled with a scrollbar.
.PP
The notebook area is implemented with the notebook mega widget.
.SH TABS
Tabs appear along the edge of the notebook area. Tabs are drawn to appear 
attached to their associated page. When a tab is clicked on, the associated 
page is selected and the tab is drawn as raised above all other tabs and as 
a seamless part of its notebook page. Tabs can be controlled in their 
location along the edges, the angle tab sides are drawn with, gap between 
tabs, starting margin of tabs, internal padding around text labels in 
a tab, the font, and its label. 
.PP
The Tab area is implemented with the \fBtabset\fR mega widget. 
See \fBtabset(1)\fR. Tabs may be oriented along either the north, south, 
east, or west sides with the \fBtabPos\fR option. North and south tabs 
may appear as angled, square, or bevelled. West and east tabs may appear 
as square or bevelled. By changing tab gaps, tab angles, bevelling, 
orientations, colors, fonts, start locations, and margins; tabs may appear 
in a wide variety of styles. For example, it is possible to implement 
Microsoft-style tabs, Borland property tab styles, or Borland Delphi 
style tabs all with the same tabnotebook.
.SH "WIDGET-SPECIFIC METHODS"
.PP
The \fBtabnotebook\fR command creates a new Tcl command whose name 
is \fIpathName\fR. This command may be used to invoke various operations 
on the widget. It has the following general form:
.DS C
\fIpathName option \fR?\fIarg arg ...\fR?
.DE
\fIoption\fR and the \fIarg\fRs
determine the exact behavior of the command.
.PP
Many of the widget commands for a notebook take as one argument an 
indicator of which page of the notebook to operate on. These indicators are 
called indexes and may be specified in any of the following forms:
.TP
\fInumber\fR
Specifies the page numerically, where 0 corresponds to the first page 
in the notebook, 1 to the second, and so on.
.TP
\fBselect\fR
Specifies the currently selected page's index. If no page is currently 
selected, the value -1 is returned.
.TP
\fBend\fR
Specifes the last page in the tabnotebook's index. If the notebook is empty 
this will return -1.
.TP
\fIpattern\fR
If the index doesn't satisfy any of the above forms, then this form is 
used. Pattern is pattern-matched against the label of each page in the 
notebook, in order from the first to the last page, until a matching entry 
is found. The rules of Tcl_StringMatch are used.
'.............................................................................
The following commands are possible for tabnotebook widgets:
.TP
\fIpathName\fR \fBadd\fR ?\fIoption\fR \fIvalue\fR \fIoption\fR \fIvalue\fR ...?
Add a new page at the end of the tabnotebook. A new child site frame is 
created. Returns the child site pathName. If additional arguments are 
present, they specify any of the following options:
.RS
.TP
\fB-angle\fR \fIvalue\fR
Specifes the angle of slope from the inner edge to the outer edge of the 
tab. An angle of 0 specifies square tabs. Valid ranges are 0 to 45 degrees 
inclusive. Default is 15 degrees. If this option is specified as an empty 
string (the default), then the angle option for the overall tabnotebook 
is used. This is generally only set at the tabnotebook level. Tabs normally 
will want to share the same angle value.
.TP
\fB-background\fR \fIvalue\fR
Specifies a background color to use for displaying tabs when they are 
selected and for displaying the current page. If this option is specified 
as an empty string (the default), then the background option for the 
overall tabnotebook is used.
.TP
\fB-bevelamount\fR \fIvalue\fR
Specifes the size of tab corners. A value of 0 with angle set to 0 
results in square tabs. A bevelAmount of 4, means that the tab will be 
drawn with angled corners that cut in 4 pixels from the edge of the tab. 
The default is 0. This is generally only set at the tabnotebook level. 
Tabs normally will want to share the same bevelAmount.
.TP
\fB-bitmap\fR \fIvalue\fR
If label is a non-empty string, specifies a bitmap to display in this 
page's tab. Bitmap may be of any of the forms accepted by Tk_GetPixmap. 
.TP
\fB-command\fR \fIvalue\fR
Specifies a Tcl command to be executed when this page is selected. This 
allows the programmer a hook to reconfigure this page's widgets or any 
other page's widgets.
.IP
If the tabnotebook has the auto option set to true, when a page is 
selected this command will be called immediately after the previously 
selected page is unpacked and immediately before this page is selected. The 
index value select is valid during this Tcl command. `index select' will 
return this page's page number. 
.IP
If the auto option is set to false, when a page is selected the unpack 
and pack calls are bypassed. This Tcl command is still called.
.TP
\fB-disabledforeground\fR \fIvalue\fR
Specifies a foreground color to use for displaying tab labels when tabs 
are in their disable state. If this option is specified as an empty 
string (the default), then the disabledforeground option for the overall 
tabnotebook is used.
.TP
\fB-font\fR \fIvalue\fR
Specifies the font to use when drawing a text label on a page tab. If 
this option is specified as an empty string then the font option for the 
overall tabnotebook is used..
.TP
\fB-foreground\fR \fIvalue\fR
Specifies a foreground color to use for displaying tab labels when they are 
selected. If this option is specified as an empty string (the default), 
then the foreground option for the overall tabnotebook is used.
.TP
\fB-label\fR \fIvalue\fR
Specifies a string to display as an identifying label for a notebook 
page. This label serves as an additional identifier used to reference the 
page. This label may be used for the index value in widget commands.
.TP
\fB-tabbackground\fR \fIvalue\fR
Specifies a background color to use for displaying a tab when it is not 
elected. If this option is specified as an empty string (the default), then 
the tabBackground option for the overall tabnotebook is used.
.TP
\fB-tabforeground\fR \fIvalue\fR
Specifies a foreground color to use for displaying the tab's text label 
when it is not selected. If this option is specified as an empty 
string (the default), then the tabForeground option for the overall 
tabnotebook is used.
.TP
\fB-padx\fR \fIvalue\fR
Specifies a non-negative value indicating how much extra space to request 
for a tab around its label in the X-direction. When computing how large a 
window it needs, the tab will add this amount to the width it would 
normally need The tab will end up with extra internal space to the 
left and right of its text label. This value may have any of the forms 
acceptable to Tk_GetPixels. If this option is specified as an empty 
string (the default), then the padX option for the overall tabnotebook is used
.TP
\fB-pady\fR \fIvalue\fR
Specifies a non-negative value indicating how much extra space to request 
for a tab around its label in the Y-direction. When computing how large 
a window it needs, the tab will add this amount to the height it would 
normally need The tab will end up with extra internal space to the top and 
bottom of its text label. This value may have any of the forms acceptable 
to Tk_GetPixels. If this option is specified as an empty string (the 
default), then the padY option for the overall tabnotebook is used
.TP
\fB-state\fR \fIvalue\fR
Specifies one of two states for the page: normal or disabled. In normal state 
unselected tabs are displayed using the tabforeground and tabbackground 
option from the tabnotebook or the page. Selected tabs and pages are 
displayed using the foreground and background option from the tabnotebook or 
the page. The disabled state means that the page and its tab is 
insensitive: it doesn't respond to mouse button presses or releases. In this 
state the entry is displayed according to its disabledForeground option for 
the tabnotebook and the background/tabbackground option from the page or 
the tabnotebook.
.RE
.TP
'>>>>>>>>>>
\fIpathName\fR \fBchildSite\fR ?\fIindex\fR?
If passed no arguments, returns a list of pathNames for all the pages 
in the tabnotebook. If the tab notebook is empty, an empty list is returned
.IP
If \fIindex\fR is passed, it returns the \fIpathName\fR for the page's 
child site \fBframe\fR specified by \fIindex\fR. Widgets that are created 
with this \fIpathName\fR will be displayed when the associated page is 
selected. If \fIindex\fR is not a valid index, an empty string is returned. 
.TP
\fIpathName\fR \fBconfigure\fR ?\fIoption\fR? ?\fIvalue\fR \fIoption\fR \fIvalue\fR ...?
Query or modify the configuration options of the widget. If no \fIoption\fR 
is specified, returns a list describing all of the available options 
for \fIpathName\fR (see \fBTk_ConfigureInfo\fR for information on the 
format of this list). If option is specified with no value, then the 
command returns a list describing the one named option (this list will be 
identical to the corresponding sublist of the value returned if no option 
is specified). If one or more option-value pairs are specified, then the 
command modifies the given widget option(s) to have the given value(s); in 
this case the command returns an empty string. \fIOption\fR may have any 
of the values accepted by the tabnotebook command.
.TP
\fIpathName\fR \fBdelete\fR \fIindex1\fR ?\fIindex2\fR?
Delete all of the pages between \fIindex1\fR and \fIindex2\fR inclusive. 
If \fIindex2\fR is omitted then it defaults to \fIindex1\fR. Returns an 
empty string.
.TP
\fIpathName\fR \fBindex\fR \fIindex\fR
Returns the numerical index corresponding to \fIindex\fR.
.TP
\fIpathName\fR \fBinsert\fR \fIindex\fR ?\fIoption\fR \fIvalue\fR \fIoption\fR \fIvalue\fR ...?
Insert a new page in the tabnotebook before the page specified 
by \fIindex\fR. A new child site \fBframe\fR is created. The additional 
arguments are the same as for the \fBadd\fR command. Returns the 
child site \fIpathName\fR.
.TP
\fIpathName\fR \fBnext\fR
Advances the selected page to the next page (order is determined by 
insertion order). If the currently selected page is the last page in 
the notebook, the selection wraps around to the first page in the 
notebook. It behaves as if the user selected the new page.
.IP
For notebooks with \fBauto\fR set to \fBtrue\fR the current page's 
child site is unpacked from the notebook's child site frame. Then the next 
page's child site is packed into the notebook's child site frame. The 
Tcl command given with the command option will be invoked between these 
two operations.
.IP
For notebooks with \fBauto\fR set to \fBfalse\fR the Tcl command given 
with the command option will be invoked.
.TP
\fIpathName\fR \fBpageconfigure\fR \fIindex\fR ?\fIoption\fR? ?\fIvalue\fR \fIoption\fR \fIvalue\fR ...?
This command is similar to the \fBconfigure\fR command, except that it 
applies to the options for an individual page, whereas configure applies 
to the options for the tabnotebook as a whole. \fIOptions\fR may have 
any of the values accepted by the add widget command. If options are 
specified, options are modified as indicated in the command and the 
command returns an empty string. If no options are specified, returns a 
list describing the current options for page index (see \fBTk_ConfigureInfo\fR
for information on the format of this list).
.TP
\fIpathName\fR \fBprev\fR
Moves the selected page to the previous page (order is determined by 
insertion order). If the currently selected page is the first page in 
the notebook, the selection wraps around to the last page in the notebook. It 
behaves as if the user selected the new page.
.IP
For notebooks with \fBauto\fR set to \fBtrue\fR the current page's 
child site is unpacked from the notebook's child site \fBframe\fR. Then the 
previous page's child site is packed into the notebook's child site frame. 
The Tcl command given with the command option will be invoked between these 
two operations.
.IP
For notebooks with \fBauto\fR set to \fBfalse\fR the Tcl command given 
with the command option will be invoked.
.TP
\fIpathName\fR \fBselect\fR \fIindex\fR
Selects the page specified by \fIindex\fR as the currently selected page. 
It behaves as if the user selected the new page.
.IP
For notebooks with \fBauto\fR set to \fBtrue\fR the current page's child 
site is unpacked from the notebook's child site frame. Then the \fIindex\fR 
page's child site is packed into the notebook's child site frame. The 
Tcl command given with the command option will be invoked between these two 
operations.
.IP
For notebooks with \fBauto\fR set to \fBfalse\fR the Tcl command given 
with the command option will be invoked.
.TP
\fIpathName\fR \fBview\fR
Returns the currently selected page. This command is for compatibility with 
the \fBscrollbar\fR widget.
.TP
\fIpathName\fR \fBview\fR \fIindex\fR
Selects the page specified by \fIindex\fR as the currently selected page. 
This command is for compatibility with the \fBscrollbar\fR widget.
.TP
\fIpathName\fR \fBview\fR \fBmoveto\fR \fIfraction\fR
Uses the \fIfraction\fR value to determine the corresponding page to move to. 
This command is for compatibility with the \fBscrollbar\fR widget.
.TP
\fIpathName\fR \fBview\fR \fBscroll\fR \fInum\fR \fIwhat\fR
Uses the \fInum\fR value to determine how many pages to move forward or 
backward (\fInum\fR can be negative or positive). The \fIwhat\fR argument 
is ignored. This command is for compatibility with the \fBscrollbar\fR widget.
.SH "COMPONENTS"
.LP
Generally all behavior of the internal components, \fBtabset\fR 
and \fBnotebook\fR are controlled via the \fBpageconfigure\fR method. 
The following section documents these two components.
.LP
.nf
Name:   \fBtabset\fR
Class:  \fBTabset\fR
.fi
.IP
This is the tabset component. It implements the tabs that are associated 
with the notebook component.
.IP
See the "\fBTabset\fR" widget manual entry for details on 
the \fBtabset\fR component item.
.LP
.nf
Name:   \fBnotebook\fR
Class:  \fBNotebook\fR
.fi
.IP
This is the notebook component. It implements the notebook that contains the 
pages of the tabnotebook.
.IP
See the "\fBNotebook\fR" widget manual entry for details on 
the \fBnotebook\fR component item.
.fi
.SH EXAMPLE
.PP
Following is an example that creates a tabnotebook with two pages.
.PP
.nf
.IP
.ta 2c 8c 12c
# Create the tabnotebook widget and pack it.
  tabnotebook .tn -width 100 -height 100
  pack .tn \\
	-anchor nw \\
	-fill both \\
	-expand yes \\
	-side left \\
	-padx 10 \\
	-pady 10
.IP
# Add two pages to the tabnotebook, 
# labelled "Page One" and "Page Two"
  .tn add -label "Page One"
  .tn add -label "Page Two"
.IP
# Get the child site frames of these two pages.
  set page1CS [.tn childsite 0]
  set page2CS [.tn childsite "Page Two"]
.IP
# Create buttons on each page of the tabnotebook.
  button $page1CS.b -text "Button One"
  pack $page1CS.b
  button $page2CS.b -text "Button Two"
  pack $page2CS.b
.IP
# Select the first page of the tabnotebook.
  .tn select 0
.fi
.SH AUTHOR
Bill W. Scott
.SH KEYWORDS
tab tabset notebook tabnotebook page