diff options
Diffstat (limited to 'glib/aclocal.m4')
| -rw-r--r-- | glib/aclocal.m4 | 395 |
1 files changed, 395 insertions, 0 deletions
diff --git a/glib/aclocal.m4 b/glib/aclocal.m4 new file mode 100644 index 000000000..9f99ab8e7 --- /dev/null +++ b/glib/aclocal.m4 @@ -0,0 +1,395 @@ +dnl aclocal.m4 generated automatically by aclocal 1.2 + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) + +AC_DEFUN(AM_INIT_AUTOMAKE, +[AC_REQUIRE([AM_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE") +AC_DEFINE_UNQUOTED(VERSION, "$VERSION")) +AM_SANITY_CHECK +AC_ARG_PROGRAM +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_PROG_MAKE_SET]) + + +# serial 1 + +AC_DEFUN(AM_PROG_INSTALL, +[AC_REQUIRE([AC_PROG_INSTALL]) +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' +AC_SUBST(INSTALL_SCRIPT)dnl +]) + +# +# Check to make sure that the build environment is sane. +# + +AC_DEFUN(AM_SANITY_CHECK, +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$@" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + test "[$]2" = conftestfile + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +rm -f conftest* +AC_MSG_RESULT(yes)]) + +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. +AC_DEFUN(AM_MISSING_PROG, +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi +AC_SUBST($1)]) + +# Like AC_CONFIG_HEADER, but automatically create stamp file. + +AC_DEFUN(AM_CONFIG_HEADER, +[AC_PREREQ([2.12]) +AC_CONFIG_HEADER([$1]) +dnl When config.status generates a header, we must update the stamp-h file. +dnl This file resides in the same directory as the config header +dnl that is generated. We must strip everything past the first ":", +dnl and everything past the last "/". +AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl +ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, +<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, +<<am_indx=1 +for am_file in <<$1>>; do + case " <<$>>CONFIG_HEADERS " in + *" <<$>>am_file "*<<)>> + echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx + ;; + esac + am_indx=`expr "<<$>>am_indx" + 1` +done<<>>dnl>>) +changequote([,]))]) + + +# serial 17 AM_PROG_LIBTOOL +AC_DEFUN(AM_PROG_LIBTOOL, +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_RANLIB]) +AC_REQUIRE([AC_PROG_CC]) +AC_REQUIRE([AM_PROG_LD]) +AC_REQUIRE([AM_PROG_NM]) +AC_REQUIRE([AC_PROG_LN_S]) + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL) + +dnl Allow the --disable-shared flag to stop us from building shared libs. +AC_ARG_ENABLE(shared, +[ --enable-shared build shared libraries [default=yes]], +[if test "$enableval" = no; then + libtool_enable_shared=no +else + libtool_enable_shared=yes +fi]) +test -n "$libtool_enable_shared" && enable_shared="$libtool_enable_shared" +libtool_shared= +test "$enable_shared" = no && libtool_shared=" --disable-shared" + +dnl Allow the --disable-static flag to stop us from building static libs. +AC_ARG_ENABLE(static, +[ --enable-static build static libraries [default=yes]], +[if test "$enableval" = no; then + libtool_enable_static=no +else + libtool_enable_static=yes +fi]) +test -n "$libtool_enable_static" && enable_static="$libtool_enable_static" +libtool_static= +test "$enable_static" = no && libtool_static=" --disable-static" + +libtool_flags="$libtool_shared$libtool_static" +test "$silent" = yes && libtool_flags="$libtool_flags --silent" +test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" +test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +[case "$host" in +*-*-irix6*) + ac_save_CFLAGS="$CFLAGS" + flag_passed=no + for f in -32 -64 -n32 ABI -cckr -mips1 -mips2 -mips3 -mips4; do + case "$f" in + ABI) + test -n "$SGI_ABI" && flag_passed=yes + if test "$flag_passed" = no && test "$ac_cv_prog_gcc" = yes; then + # Choose the ABI flag according to GCC's specs. + if $CC -dumpspecs 2>&1 | sed '/^\*link:$/,/^$/!d' | egrep -e '[ ]-32' >/dev/null; then + LD="${LD-ld} -32" + else + LD="${LD-ld} -n32" + fi + fi + ;; + + *) + if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then + flag_passed=yes + LD="${LD-ld} $f" + fi + ;; + esac + done + CFLAGS="$ac_save_CFLAGS" + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + CFLAGS="$CFLAGS -belf" + ;; +esac] + +# Actually configure libtool. ac_aux_dir is where install-sh is found. +CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ +|| AC_MSG_ERROR([libtool configure failed]) +]) + +# AM_PROG_LD - find the path to the GNU or non-GNU linker +AC_DEFUN(AM_PROG_LD, +[AC_ARG_WITH(gnu-ld, +[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], +test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) +AC_REQUIRE([AC_PROG_CC]) +ac_prog=ld +if test "$ac_cv_prog_gcc" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + ac_prog=`($CC -print-prog-name=ld) 2>&5` + case "$ac_prog" in + # Accept absolute paths. + /*) + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(ac_cv_path_LD, +[if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog"; then + ac_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" +else + ac_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$ac_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_SUBST(LD) +AM_PROG_LD_GNU +]) + +AC_DEFUN(AM_PROG_LD_GNU, +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then + ac_cv_prog_gnu_ld=yes +else + ac_cv_prog_gnu_ld=no +fi]) +]) + +# AM_PROG_NM - find the path to a BSD-compatible name lister +AC_DEFUN(AM_PROG_NM, +[AC_MSG_CHECKING([for BSD-compatible nm]) +AC_CACHE_VAL(ac_cv_path_NM, +[case "$NM" in +/*) + ac_cv_path_NM="$NM" # Let the user override the test with a path. + ;; +*) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in /usr/ucb $PATH /bin; do + test -z "$ac_dir" && dir=. + if test -f $ac_dir/nm; then + # Check to see if the nm accepts a BSD-compat flag. + if ($ac_dir/nm -B /dev/null 2>&1; exit 0) | grep /dev/null >/dev/null; then + ac_cv_path_NM="$ac_dir/nm -B" + elif ($ac_dir/nm -p /dev/null 2>&1; exit 0) | grep /dev/null >/dev/null; then + ac_cv_path_NM="$ac_dir/nm -p" + else + ac_cv_path_NM="$ac_dir/nm" + fi + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm + ;; +esac]) +NM="$ac_cv_path_NM" +AC_MSG_RESULT([$NM]) +AC_SUBST(NM) +]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + if test $USE_MAINTAINER_MODE = yes; then + MAINT= + else + MAINT='#M#' + fi + AC_SUBST(MAINT)dnl +] +) + + +# serial 1 + +# @defmac AC_PROG_CC_STDC +# @maindex PROG_CC_STDC +# @ovindex CC +# If the C compiler in not in ANSI C mode by default, try to add an option +# to output variable @code{CC} to make it so. This macro tries various +# options that select ANSI C on some system or another. It considers the +# compiler to be in ANSI C mode if it defines @code{__STDC__} to 1 and +# handles function prototypes correctly. +# +# If you use this macro, you should check after calling it whether the C +# compiler has been set to accept ANSI C; if not, the shell variable +# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source +# code in ANSI C, you can make an un-ANSIfied copy of it by using the +# program @code{ansi2knr}, which comes with Ghostscript. +# @end defmac + +AC_DEFUN(AM_PROG_CC_STDC, +[AC_REQUIRE([AC_PROG_CC]) +AC_BEFORE([$0], [AC_C_INLINE]) +AC_BEFORE([$0], [AC_C_CONST]) +AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C) +AC_CACHE_VAL(am_cv_prog_cc_stdc, +[am_cv_prog_cc_stdc=no +ac_save_CC="$CC" +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + AC_TRY_COMPILE( +[#if !defined(__STDC__) || __STDC__ != 1 +choke me +#endif +/* DYNIX/ptx V4.1.3 can't compile sys/stat.h with -Xc -D__EXTENSIONS__. */ +#ifdef _SEQUENT_ +# include <sys/types.h> +# include <sys/stat.h> +#endif +], [ +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);};], +[am_cv_prog_cc_stdc="$ac_arg"; break]) +done +CC="$ac_save_CC" +]) +if test -z "$am_cv_prog_cc_stdc"; then + AC_MSG_RESULT([none needed]) +else + AC_MSG_RESULT($am_cv_prog_cc_stdc) +fi +case "x$am_cv_prog_cc_stdc" in + x|xno) ;; + *) CC="$CC $am_cv_prog_cc_stdc" ;; +esac +]) + |