1 files changed, 143 insertions, 0 deletions
diff --git a/test/network_tests/initial_event_tests/initial_event_test_master_starter.sh b/test/network_tests/initial_event_tests/initial_event_test_master_starter.sh
new file mode 100755
index 0000000..9d52e3f
--- /dev/null
+++ b/test/network_tests/initial_event_tests/initial_event_test_master_starter.sh
@@ -0,0 +1,143 @@
+#!/bin/bash
+# Copyright (C) 2015-2017 Bayerische Motoren Werke Aktiengesellschaft (BMW AG)
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+
+# Purpose: This script is needed to start the services with
+# one command. This is necessary as ctest - which is used to run the
+# tests - isn't able to start multiple binaries for one testcase. Therefore
+# the testcase simply executes this script. This script then runs the services
+# and checks that all exit successfully.
+
+if [ $# -lt 1 ]
+then
+    echo "Please pass a json file to this script."
+    echo "For example: $0 initial_event_test_diff_client_ids_diff_ports_master.json"
+    echo "To use the same service id but different instances on the node pass SAME_SERVICE_ID as third parameter"
+    echo "To ensure the first client only subscribes to one event pass SUBSCRIBE_ONLY_ONE as third/fourth parameter"
+    exit 1
+fi
+
+PASSED_JSON_FILE=$1
+# Remove processed options from $@
+shift 1
+REMAINING_OPTIONS="$@"
+
+print_starter_message () {
+
+if [ ! -z "$USE_LXC_TEST" ]; then
+    echo "starting initial event test on slave LXC with params $CLIENT_JSON_FILE $REMAINING_OPTIONS"
+    ssh -tt -i $SANDBOX_ROOT_DIR/commonapi_main/lxc-config/.ssh/mgc_lxc/rsa_key_file.pub -o StrictHostKeyChecking=no root@$LXC_TEST_SLAVE_IP "bash -ci \"set -m; cd \\\$SANDBOX_TARGET_DIR/vsomeip_lib/test/network_tests; ./initial_event_test_slave_starter.sh $CLIENT_JSON_FILE $REMAINING_OPTIONS\"" &
+elif [ ! -z "$USE_DOCKER" ]; then
+    docker exec $DOCKER_IMAGE sh -c "cd $DOCKER_TESTS && ./initial_event_test_slave_starter.sh $CLIENT_JSON_FILE $REMAINING_OPTIONS" &
+else
+cat <<End-of-message
+*******************************************************************************
+*******************************************************************************
+** Please now run:
+** initial_event_test_slave_starter.sh $CLIENT_JSON_FILE $REMAINING_OPTIONS
+** from an external host to successfully complete this test.
+**
+** You probably will need to adapt the 'unicast' settings in
+** initial_event_test_diff_client_ids_diff_ports_master.json and
+** initial_event_test_diff_client_ids_diff_ports_slave.json to your personal setup.
+*******************************************************************************
+*******************************************************************************
+End-of-message
+fi
+}
+
+# replace master with slave to be able display the correct json file to be used
+# with the slave script
+MASTER_JSON_FILE=$PASSED_JSON_FILE
+CLIENT_JSON_FILE=${MASTER_JSON_FILE/master/slave}
+
+FAIL=0
+
+# Start the services
+export VSOMEIP_CONFIGURATION=$PASSED_JSON_FILE
+
+export VSOMEIP_APPLICATION_NAME=initial_event_test_service_one
+./initial_event_test_service 1 $REMAINING_OPTIONS &
+PID_SERVICE_ONE=$!
+
+export VSOMEIP_APPLICATION_NAME=initial_event_test_service_two
+./initial_event_test_service 2 $REMAINING_OPTIONS &
+PID_SERVICE_TWO=$!
+
+export VSOMEIP_APPLICATION_NAME=initial_event_test_service_three
+./initial_event_test_service 3 $REMAINING_OPTIONS &
+PID_SERVICE_THREE=$!
+
+sleep 3
+
+unset VSOMEIP_APPLICATION_NAME
+
+# Array for client pids
+CLIENT_PIDS=()
+
+# Start first client which subscribes remotely
+./initial_event_test_client 9000 DONT_EXIT $REMAINING_OPTIONS &
+FIRST_PID=$!
+
+# Start availability checker in order to wait until the services on the remote
+# were started as well
+./initial_event_test_availability_checker 1234 $REMAINING_OPTIONS &
+PID_AVAILABILITY_CHECKER=$!
+
+sleep 1
+
+print_starter_message
+
+# remove SUBSCRIBE_ONLY_ONCE parameter from $REMAINING_OPTIONS to ensure the
+# following clients subscribe normaly
+REMAINING_OPTIONS=${REMAINING_OPTIONS%SUBSCRIBE_ONLY_ONE}
+REMAINING_OPTIONS=${REMAINING_OPTIONS#SUBSCRIBE_ONLY_ONE}
+
+
+# wait until the services on the remote node were started as well
+echo "WAITING FOR SERVICE AVAILABILITY"
+wait $PID_AVAILABILITY_CHECKER
+echo "ALL SERVICES ARE AVAILABLE NOW"
+
+sleep 2
+
+for client_number in $(seq 9001 9011)
+do
+   ./initial_event_test_client $client_number STRICT_CHECKING $REMAINING_OPTIONS &
+   CLIENT_PIDS+=($!)
+done
+
+
+# Wait until all clients are finished
+for job in ${CLIENT_PIDS[*]}
+do
+    # Fail gets incremented if a client exits with a non-zero exit code
+    wait $job || FAIL=$(($FAIL+1))
+done
+
+# wait until all clients exited on slave side
+./initial_event_test_stop_service MASTER &
+PID_STOP_SERVICE=$!
+wait $PID_STOP_SERVICE
+
+# shutdown the first client
+kill $FIRST_PID
+wait $FIRST_PID || FAIL=$(($FAIL+1))
+
+# shutdown the services
+kill $PID_SERVICE_THREE
+kill $PID_SERVICE_TWO
+kill $PID_SERVICE_ONE
+
+sleep 1
+echo ""
+
+# Check if they exited successfully
+if [ $FAIL -eq 0 ]
+then
+    exit 0
+else
+    exit 1
+fi