diff options
Diffstat (limited to 'gettext-tools/po/zh_TW.po')
-rw-r--r-- | gettext-tools/po/zh_TW.po | 4126 |
1 files changed, 4126 insertions, 0 deletions
diff --git a/gettext-tools/po/zh_TW.po b/gettext-tools/po/zh_TW.po new file mode 100644 index 0000000..ea6b4d2 --- /dev/null +++ b/gettext-tools/po/zh_TW.po @@ -0,0 +1,4126 @@ +# Traditional Chinese translation for gettext. +# Copyright (C) 1998, 2001, 2002, 2005 Free Software Foundation, Inc. +# This file is distributed under the same license as the gettext package. +# Pofeng Lee <pofeng@linux.org.tw>, 2001-2002. +# Yuan-Chung Cheng <platin@ms.ccafps.khc.edu.tw>, 1998. +# Abel Cheung <abelcheung@gmail.com>, 2002, 2005. +# Wei-Lun Chao <bluebat@member.fsf.org>, 2013. +# +msgid "" +msgstr "" +"Project-Id-Version: gettext-tools 0.18.3\n" +"Report-Msgid-Bugs-To: bug-gnu-gettext@gnu.org\n" +"POT-Creation-Date: 2014-12-24 16:27+0900\n" +"PO-Revision-Date: 2013-09-03 13:00+0800\n" +"Last-Translator: Wei-Lun Chao <bluebat@member.fsf.org>\n" +"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n" +"Language: zh_TW\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +#: gnulib-lib/argmatch.c:133 +#, c-format +msgid "invalid argument %s for %s" +msgstr "%2$s 的引數 %1$s 無效" + +#: gnulib-lib/argmatch.c:134 +#, c-format +msgid "ambiguous argument %s for %s" +msgstr "%2$s 的引數 %1$s 不明確" + +#: gnulib-lib/argmatch.c:153 +msgid "Valid arguments are:" +msgstr "有效的引數為:" + +#: gnulib-lib/clean-temp.c:325 +#, c-format +msgid "cannot find a temporary directory, try setting $TMPDIR" +msgstr "找不到暫存檔目錄,正嘗試設定 $TMPDIR" + +#: gnulib-lib/clean-temp.c:339 +#, c-format +msgid "cannot create a temporary directory using template \"%s\"" +msgstr "無法根據目錄名稱樣式 %s 建立暫存檔目錄" + +#: gnulib-lib/clean-temp.c:435 +#, c-format +msgid "cannot remove temporary file %s" +msgstr "無法刪除暫存檔 %s" + +#: gnulib-lib/clean-temp.c:450 +#, c-format +msgid "cannot remove temporary directory %s" +msgstr "無法刪除暫存目錄 %s" + +#: gnulib-lib/closeout.c:66 +msgid "write error" +msgstr "寫入時發生錯誤" + +#: gnulib-lib/copy-acl.c:54 gnulib-lib/copy-file.c:212 +#, c-format +msgid "preserving permissions for %s" +msgstr "" + +# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, c-format +#: gnulib-lib/copy-file.c:189 +#, c-format +msgid "error while opening %s for reading" +msgstr "當開啟檔案 %s 準備讀取時發生錯誤" + +#: gnulib-lib/copy-file.c:193 +#, c-format +msgid "cannot open backup file %s for writing" +msgstr "無法開啟備份檔 %s 來寫入內容" + +#: gnulib-lib/copy-file.c:197 +#, c-format +msgid "error reading %s" +msgstr "讀取 %s 時發生錯誤" + +#: gnulib-lib/copy-file.c:201 +#, c-format +msgid "error writing %s" +msgstr "寫入 %s 時發生錯誤" + +#: gnulib-lib/copy-file.c:205 +#, c-format +msgid "error after reading %s" +msgstr "完成讀取 %s 後發生錯誤" + +#: gnulib-lib/csharpcomp.c:310 gnulib-lib/javaversion.c:76 src/msginit.c:898 +#: src/msginit.c:973 src/msginit.c:1133 src/msginit.c:1232 +#: src/read-csharp.c:72 src/read-java.c:70 src/read-resources.c:73 +#: src/read-tcl.c:110 src/write-resources.c:77 +#, c-format +msgid "fdopen() failed" +msgstr "fdopen() 失敗" + +#: gnulib-lib/csharpcomp.c:571 +#, c-format +msgid "C# compiler not found, try installing pnet" +msgstr "找不到 C# 編譯器,請安裝 pnet" + +#: gnulib-lib/csharpexec.c:343 +#, c-format +msgid "C# virtual machine not found, try installing pnet" +msgstr "找不到 C# virtual machine,請安裝 pnet" + +#: gnulib-lib/error.c:191 +msgid "Unknown system error" +msgstr "系統出現不明錯誤" + +#: gnulib-lib/execute.c:191 gnulib-lib/execute.c:264 +#: gnulib-lib/spawn-pipe.c:236 gnulib-lib/spawn-pipe.c:350 +#: gnulib-lib/wait-process.c:282 gnulib-lib/wait-process.c:356 +#, c-format +msgid "%s subprocess failed" +msgstr "%s 副行程發生錯誤" + +#: gnulib-lib/getopt.c:547 gnulib-lib/getopt.c:576 +#, c-format +msgid "%s: option '%s' is ambiguous; possibilities:" +msgstr "%s:選項 ‘%s’ 不明確;可能選項包括:" + +#: gnulib-lib/getopt.c:624 gnulib-lib/getopt.c:628 +#, c-format +msgid "%s: option '--%s' doesn't allow an argument\n" +msgstr "%s:選項 --%s 不可配合引數使用\n" + +#: gnulib-lib/getopt.c:637 gnulib-lib/getopt.c:642 +#, fuzzy, c-format +msgid "%s: option '%c%s' doesn't allow an argument\n" +msgstr "%s:選項 ‘%c%s’ 不可配合引數使用\n" + +#: gnulib-lib/getopt.c:685 gnulib-lib/getopt.c:704 +#, fuzzy, c-format +msgid "%s: option '--%s' requires an argument\n" +msgstr "%s:選項 ‘%s’ 需要引數\n" + +#: gnulib-lib/getopt.c:742 gnulib-lib/getopt.c:745 +#, fuzzy, c-format +msgid "%s: unrecognized option '--%s'\n" +msgstr "%s:無法辨識 ‘--%s’ 選項\n" + +#: gnulib-lib/getopt.c:753 gnulib-lib/getopt.c:756 +#, fuzzy, c-format +msgid "%s: unrecognized option '%c%s'\n" +msgstr "%s:無法辨識 ‘%c%s’ 選項\n" + +#: gnulib-lib/getopt.c:805 gnulib-lib/getopt.c:808 +#, fuzzy, c-format +msgid "%s: invalid option -- '%c'\n" +msgstr "%s:選項無效 -- %c\n" + +#: gnulib-lib/getopt.c:861 gnulib-lib/getopt.c:878 gnulib-lib/getopt.c:1088 +#: gnulib-lib/getopt.c:1106 +#, fuzzy, c-format +msgid "%s: option requires an argument -- '%c'\n" +msgstr "%s:選項需要引數 -- %c\n" + +#: gnulib-lib/getopt.c:934 gnulib-lib/getopt.c:950 +#, fuzzy, c-format +msgid "%s: option '-W %s' is ambiguous\n" +msgstr "%s:選項 ‘-W %s’ 不明確\n" + +#: gnulib-lib/getopt.c:974 gnulib-lib/getopt.c:992 +#, fuzzy, c-format +msgid "%s: option '-W %s' doesn't allow an argument\n" +msgstr "%s:選項 ‘-W %s’ 不可配合引數使用\n" + +#: gnulib-lib/getopt.c:1013 gnulib-lib/getopt.c:1031 +#, fuzzy, c-format +msgid "%s: option '-W %s' requires an argument\n" +msgstr "%s:選項 ‘%s’ 需要引數\n" + +#: gnulib-lib/javacomp.c:121 gnulib-lib/javacomp.c:135 +#: gnulib-lib/javacomp.c:151 +#, c-format +msgid "invalid source_version argument to compile_java_class" +msgstr "" + +#: gnulib-lib/javacomp.c:166 gnulib-lib/javacomp.c:187 +#, c-format +msgid "invalid target_version argument to compile_java_class" +msgstr "" + +#: gnulib-lib/javacomp.c:498 src/write-csharp.c:739 src/write-java.c:1140 +#: src/write-java.c:1148 src/write-java.c:1176 src/write-java.c:1188 +#, c-format +msgid "failed to create \"%s\"" +msgstr "無法建立 “%s”" + +#: gnulib-lib/javacomp.c:505 src/write-catalog.c:255 src/write-catalog.c:319 +#: src/write-csharp.c:748 src/write-java.c:1156 src/write-java.c:1197 +#: src/write-mo.c:811 src/write-qt.c:748 src/write-tcl.c:222 +#, c-format +msgid "error while writing \"%s\" file" +msgstr "當寫入檔案 %s 時發生錯誤" + +#: gnulib-lib/javacomp.c:2338 +#, c-format +msgid "Java compiler not found, try installing gcj or set $JAVAC" +msgstr "找不到 Java 編譯器,請安裝 gcj 或是設定 $JAVAC 環境變數" + +#: gnulib-lib/javaexec.c:417 +#, c-format +msgid "Java virtual machine not found, try installing gij or set $JAVA" +msgstr "找不到 Java virtual machine,請安裝 gij 或是設定 $JAVA 環境變數" + +#: gnulib-lib/javaversion.c:84 src/msginit.c:906 src/msginit.c:981 +#: src/msginit.c:1141 +#, c-format +msgid "%s subprocess I/O error" +msgstr "%s 副行程輸出/輸入錯誤" + +#: gnulib-lib/obstack.c:338 gnulib-lib/obstack.c:340 gnulib-lib/xmalloc.c:37 +#: gnulib-lib/xsetenv.c:37 src/msgl-check.c:559 src/po-lex.c:83 +#: src/po-lex.c:102 src/x-glade.c:548 libgettextpo/gettext-po.c:1326 +#, c-format +msgid "memory exhausted" +msgstr "記憶體耗盡" + +#: gnulib-lib/pipe-filter-ii.c:192 +#, c-format +msgid "creation of threads failed" +msgstr "" + +#: gnulib-lib/pipe-filter-ii.c:224 gnulib-lib/pipe-filter-ii.c:381 +#: src/msgexec.c:405 +#, c-format +msgid "write to %s subprocess failed" +msgstr "寫入至 %s 副行程時發生錯誤" + +#: gnulib-lib/pipe-filter-ii.c:245 gnulib-lib/pipe-filter-ii.c:424 +#, c-format +msgid "read from %s subprocess failed" +msgstr "由 %s 副行程讀入資料時出現錯誤" + +#: gnulib-lib/pipe-filter-ii.c:298 +#, c-format +msgid "cannot set up nonblocking I/O to %s subprocess" +msgstr "無法和 %s 副行程建立非專用的 I/O" + +#: gnulib-lib/pipe-filter-ii.c:336 +#, c-format +msgid "communication with %s subprocess failed" +msgstr "和 %s 副行程溝通時出現錯誤" + +#: gnulib-lib/pipe-filter-ii.c:456 +#, c-format +msgid "%s subprocess terminated with exit code %d" +msgstr "%s 副行程已終止,錯誤碼為 %d" + +#. TRANSLATORS: +#. Get translations for open and closing quotation marks. +#. The message catalog should translate "`" to a left +#. quotation mark suitable for the locale, and similarly for +#. "'". For example, a French Unicode local should translate +#. these to U+00AB (LEFT-POINTING DOUBLE ANGLE +#. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE +#. QUOTATION MARK), respectively. +#. +#. If the catalog has no translation, we will try to +#. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and +#. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the +#. current locale is not Unicode, locale_quoting_style +#. will quote 'like this', and clocale_quoting_style will +#. quote "like this". You should always include translations +#. for "`" and "'" even if U+2018 and U+2019 are appropriate +#. for your locale. +#. +#. If you don't know what to put here, please see +#. <http://en.wikipedia.org/wiki/Quotation_marks_in_other_languages> +#. and use glyphs suitable for your language. +#: gnulib-lib/quotearg.c:312 +msgid "`" +msgstr "" + +#: gnulib-lib/quotearg.c:313 +msgid "'" +msgstr "" + +#: gnulib-lib/set-acl.c:46 +#, c-format +msgid "setting permissions for %s" +msgstr "" + +#: gnulib-lib/spawn-pipe.c:142 gnulib-lib/spawn-pipe.c:145 +#: gnulib-lib/spawn-pipe.c:266 gnulib-lib/spawn-pipe.c:269 +#, c-format +msgid "cannot create pipe" +msgstr "無法建立管線" + +#: gnulib-lib/w32spawn.h:43 +#, c-format +msgid "_open_osfhandle failed" +msgstr "_open_osfhandle 失敗" + +#: gnulib-lib/w32spawn.h:84 +#, fuzzy, c-format +msgid "cannot restore fd %d: dup2 failed" +msgstr "無法產生輸出檔 “%s”" + +#: gnulib-lib/wait-process.c:223 gnulib-lib/wait-process.c:255 +#: gnulib-lib/wait-process.c:317 +#, c-format +msgid "%s subprocess" +msgstr "%s 副行程" + +#: gnulib-lib/wait-process.c:274 gnulib-lib/wait-process.c:346 +#, c-format +msgid "%s subprocess got fatal signal %d" +msgstr "%s 副行程出現代表嚴重錯誤的訊號 %d" + +# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, c-format +#: src/file-list.c:53 src/msggrep.c:247 src/open-catalog.c:122 +#: src/read-mo.c:258 src/read-tcl.c:125 src/urlget.c:216 src/xgettext.c:1974 +#: src/xgettext.c:1987 src/xgettext.c:1997 +#, c-format +msgid "error while opening \"%s\" for reading" +msgstr "當開啟檔案 %s 準備讀取時發生錯誤" + +#: src/format.c:151 +#, fuzzy, c-format +msgid "'%s' is not a valid %s format string, unlike '%s'. Reason: %s" +msgstr "和 ‘msgid’ 不同,‘%s’ 的 %s 格式字串無效。原因:%s" + +#: src/format-awk.c:509 src/format-boost.c:617 src/format-elisp.c:348 +#: src/format-gcc-internal.c:627 src/format-librep.c:312 src/format-lua.c:228 +#: src/format-pascal.c:397 src/format-perl.c:584 src/format-php.c:350 +#: src/format-qt.c:173 src/format-tcl.c:390 src/format-ycp.c:147 +#, fuzzy, c-format +msgid "" +"a format specification for argument %u, as in '%s', doesn't exist in '%s'" +msgstr "‘%2$s’ 中第 %1$u 個引數的規格在 ‘msgid’ 中並不存在" + +#: src/format-awk.c:520 src/format-boost.c:628 src/format-elisp.c:359 +#: src/format-gcc-internal.c:638 src/format-librep.c:323 src/format-lua.c:235 +#: src/format-pascal.c:408 src/format-perl.c:595 src/format-php.c:361 +#: src/format-qt.c:170 src/format-tcl.c:401 src/format-ycp.c:144 +#, c-format +msgid "a format specification for argument %u doesn't exist in '%s'" +msgstr "第 %u 個引數的規格在‘%s’中並不存在" + +#: src/format-awk.c:540 src/format-boost.c:648 src/format-c.c:146 +#: src/format-elisp.c:379 src/format-gcc-internal.c:658 +#: src/format-gfc-internal.c:372 src/format-javascript.c:227 +#: src/format-librep.c:343 src/format-lua.c:242 src/format-pascal.c:428 +#: src/format-perl.c:615 src/format-php.c:381 src/format-python.c:527 +#: src/format-tcl.c:421 +#, fuzzy, c-format +msgid "format specifications in '%s' and '%s' for argument %u are not the same" +msgstr "‘msgid’和‘%s’的第 %u 個引數的規格並不相同" + +#: src/format-boost.c:449 +#, fuzzy, c-format +msgid "The directive number %u starts with | but does not end with |." +msgstr "第 %u 個指令結束的不是 ‘}’,而是不合法的字元。" + +#: src/format-c.c:36 +#, c-format +msgid "" +"In the directive number %u, the token after '<' is not the name of a format " +"specifier macro. The valid macro names are listed in ISO C 99 section 7.8.1." +msgstr "" +"在第 %u 個指令,‘<’ 之後的關鍵字不是正確的變數規格。如果想獲知正確的變數規格" +"名稱,請參考 ISO C 99 規格第 7.8.1 節。" + +#: src/format-c.c:39 +#, c-format +msgid "In the directive number %u, the token after '<' is not followed by '>'." +msgstr "在第 %u 個指令,‘<’ 之後的關鍵字後面缺少了 ‘>’。" + +#: src/format-c.c:42 src/format-gfc-internal.c:289 +#, c-format +msgid "The string refers to argument number %u but ignores argument number %u." +msgstr "字串中有提及第 %u 個引數,但忽略了第 %u 個。" + +#: src/format-c.c:137 src/format-csharp.c:206 src/format-gfc-internal.c:363 +#: src/format-javascript.c:215 src/format-python.c:515 +#: src/format-qt-plural.c:110 +#, fuzzy, c-format +msgid "number of format specifications in '%s' and '%s' does not match" +msgstr "‘msgid’ 和 ‘%s’ 的格式規格數目不符" + +#: src/format-csharp.c:88 src/format-java.c:205 +#, c-format +msgid "In the directive number %u, '{' is not followed by an argument number." +msgstr "" + +#: src/format-csharp.c:109 +#, c-format +msgid "In the directive number %u, ',' is not followed by a number." +msgstr "在第 %u 個指令,‘,’ 後面的不是數字。" + +#: src/format-csharp.c:130 src/format-java.c:191 +msgid "" +"The string ends in the middle of a directive: found '{' without matching '}'." +msgstr "" + +#: src/format-csharp.c:139 +#, c-format +msgid "" +"The directive number %u ends with an invalid character '%c' instead of '}'." +msgstr "第 %u 個指令結束的字元是 ‘%c’ 而不是 ‘}’。" + +#: src/format-csharp.c:140 +#, c-format +msgid "The directive number %u ends with an invalid character instead of '}'." +msgstr "第 %u 個指令結束的不是 ‘}’,而是不合法的字元。" + +#: src/format-csharp.c:161 src/format-java.c:346 +msgid "" +"The string starts in the middle of a directive: found '}' without matching " +"'{'." +msgstr "" + +#: src/format-csharp.c:162 +#, c-format +msgid "The string contains a lone '}' after directive number %u." +msgstr "第 %u 個指令後出現單獨的 ‘}’。" + +#: src/format-gcc-internal.c:255 +#, fuzzy, c-format +msgid "In the directive number %u, the flags combination is invalid." +msgstr "第 %u 個指令的子字串 %s 是無效的數字格式。" + +#: src/format-gcc-internal.c:292 +#, fuzzy, c-format +msgid "In the directive number %u, a precision is not allowed before '%c'." +msgstr "第 %u 個指令的 %s 後面缺少了逗號。" + +#: src/format-gcc-internal.c:334 +#, fuzzy, c-format +msgid "" +"In the directive number %u, the argument number for the precision must be " +"equal to %u." +msgstr "第 %u 個指令中的數字 0 不是正整數。" + +#: src/format-gcc-internal.c:398 +#, fuzzy, c-format +msgid "" +"In the directive number %u, a precision specification is not allowed before " +"'%c'." +msgstr "在第 %u 個指令,‘<’ 之後的關鍵字後面缺少了 ‘>’。" + +#: src/format-gcc-internal.c:406 +#, fuzzy, c-format +msgid "In the directive number %u, the precision specification is invalid." +msgstr "第 %u 個指令的子字串 %s 是無效的數字格式。" + +#: src/format-gcc-internal.c:463 +#, c-format +msgid "In the directive number %u, flags are not allowed before '%c'." +msgstr "" + +#: src/format-gcc-internal.c:677 +#, fuzzy, c-format +msgid "'%s' uses %%m but '%s' doesn't" +msgstr "‘msgid’ 使用了 %%m 但 ‘%s’ 沒有。" + +#: src/format-gcc-internal.c:680 +#, fuzzy, c-format +msgid "'%s' does not use %%m but '%s' uses %%m" +msgstr "‘msgid’ 沒有使用 %%m 但 ‘%s’ 有使用 %%m。" + +#: src/format-gfc-internal.c:383 +#, fuzzy, c-format +msgid "'%s' uses %%C but '%s' doesn't" +msgstr "‘msgid’ 使用了 %%m 但 ‘%s’ 沒有。" + +#: src/format-gfc-internal.c:386 +#, fuzzy, c-format +msgid "'%s' does not use %%C but '%s' uses %%C" +msgstr "‘msgid’ 沒有使用 %%m 但 ‘%s’ 有使用 %%m。" + +#: src/format-invalid.h:22 +msgid "The string ends in the middle of a directive." +msgstr "在指令中間,字串突然結束" + +#: src/format-invalid.h:25 +msgid "" +"The string refers to arguments both through absolute argument numbers and " +"through unnumbered argument specifications." +msgstr "字串中同時出現了有硬性規定和沒有硬性規定位置的引數" + +#: src/format-invalid.h:28 +#, c-format +msgid "" +"In the directive number %u, the argument number 0 is not a positive integer." +msgstr "第 %u 個指令中的數字 0 不是正整數。" + +#: src/format-invalid.h:30 +#, c-format +msgid "" +"In the directive number %u, the width's argument number 0 is not a positive " +"integer." +msgstr "" + +#: src/format-invalid.h:32 +#, c-format +msgid "" +"In the directive number %u, the precision's argument number 0 is not a " +"positive integer." +msgstr "" + +#: src/format-invalid.h:36 +#, c-format +msgid "" +"In the directive number %u, the character '%c' is not a valid conversion " +"specifier." +msgstr "第 %u 個指令的 ‘%c’ 字元屬於無效的列印格式。" + +#: src/format-invalid.h:37 +#, c-format +msgid "" +"The character that terminates the directive number %u is not a valid " +"conversion specifier." +msgstr "用來結束第 %u 個指令的字元屬於無效的列印格式。" + +#: src/format-invalid.h:40 +#, c-format +msgid "The string refers to argument number %u in incompatible ways." +msgstr "字串採用了不相容的方法來表示第 %u 個引數。" + +#: src/format-java.c:240 +#, c-format +msgid "" +"In the directive number %u, the substring \"%s\" is not a valid date/time " +"style." +msgstr "第 %u 個指令的子字串 %s 是無效的日期/時間格式。" + +#: src/format-java.c:251 src/format-java.c:285 src/format-java.c:314 +#, c-format +msgid "In the directive number %u, \"%s\" is not followed by a comma." +msgstr "第 %u 個指令的 %s 後面缺少了逗號。" + +#: src/format-java.c:274 +#, c-format +msgid "" +"In the directive number %u, the substring \"%s\" is not a valid number style." +msgstr "第 %u 個指令的子字串 %s 是無效的數字格式。" + +#: src/format-java.c:323 +#, c-format +msgid "" +"In the directive number %u, the argument number is not followed by a comma " +"and one of \"%s\", \"%s\", \"%s\", \"%s\"." +msgstr "" + +#: src/format-java.c:572 +#, c-format +msgid "In the directive number %u, a choice contains no number." +msgstr "" + +#: src/format-java.c:583 +#, c-format +msgid "" +"In the directive number %u, a choice contains a number that is not followed " +"by '<', '#' or '%s'." +msgstr "" + +#: src/format-java.c:745 +#, fuzzy, c-format +msgid "" +"a format specification for argument {%u}, as in '%s', doesn't exist in '%s'" +msgstr "‘%2$s’ 中的引數 {%1$u} 的格式在 ‘msgid’ 中並不存在" + +#: src/format-java.c:756 +#, c-format +msgid "a format specification for argument {%u} doesn't exist in '%s'" +msgstr "引數 {%u} 的規格在 ‘%s’ 中並不存在" + +#: src/format-java.c:776 +#, fuzzy, c-format +msgid "" +"format specifications in '%s' and '%s' for argument {%u} are not the same" +msgstr "‘msgid’ 和 ‘%s’ 的引數 {%u} 規格並不相同" + +#: src/format-lisp.c:2339 src/format-lisp.c:2351 src/format-scheme.c:2365 +#: src/format-scheme.c:2377 +#, c-format +msgid "" +"In the directive number %u, parameter %u is of type '%s' but a parameter of " +"type '%s' is expected." +msgstr "" + +#: src/format-lisp.c:2374 src/format-scheme.c:2400 +#, c-format +msgid "" +"In the directive number %u, too many parameters are given; expected at most " +"%u parameter." +msgid_plural "" +"In the directive number %u, too many parameters are given; expected at most " +"%u parameters." +msgstr[0] "" +msgstr[1] "" + +#: src/format-lisp.c:2498 src/format-scheme.c:2501 +#, c-format +msgid "In the directive number %u, '%c' is not followed by a digit." +msgstr "" + +#: src/format-lisp.c:2738 src/format-scheme.c:2756 +#, c-format +msgid "In the directive number %u, the argument %d is negative." +msgstr "" + +#: src/format-lisp.c:2807 +msgid "The string ends in the middle of a ~/.../ directive." +msgstr "" + +#: src/format-lisp.c:2845 src/format-lisp.c:3110 src/format-lisp.c:3227 +#: src/format-lisp.c:3287 src/format-lisp.c:3399 src/format-scheme.c:2842 +#: src/format-scheme.c:3107 src/format-scheme.c:3224 src/format-scheme.c:3322 +#, c-format +msgid "Found '~%c' without matching '~%c'." +msgstr "找到 ‘~%c’ 但沒有 ‘~%c’ 配合。" + +#: src/format-lisp.c:2865 src/format-scheme.c:2862 +#, c-format +msgid "In the directive number %u, both the @ and the : modifiers are given." +msgstr "" + +#: src/format-lisp.c:2978 src/format-scheme.c:2975 +#, c-format +msgid "" +"In the directive number %u, '~:[' is not followed by two clauses, separated " +"by '~;'." +msgstr "" + +#: src/format-lisp.c:3328 src/format-scheme.c:3265 +#, c-format +msgid "In the directive number %u, '~;' is used in an invalid position." +msgstr "" + +#: src/format-lisp.c:3434 src/format-scheme.c:3357 +msgid "The string refers to some argument in incompatible ways." +msgstr "" + +#: src/format-lisp.c:3476 src/format-scheme.c:3399 +#, fuzzy, c-format +msgid "format specifications in '%s' and '%s' are not equivalent" +msgstr "‘msgid’ 和 ‘%s’ 的格式規格並非同等" + +#: src/format-lisp.c:3492 src/format-scheme.c:3415 +#, fuzzy, c-format +msgid "format specifications in '%s' are not a subset of those in '%s'" +msgstr "‘%s’ 的格式規格並非 ‘msgid’ 的格式規格的一部份" + +#: src/format-perl.c:433 +#, c-format +msgid "" +"In the directive number %u, the size specifier is incompatible with the " +"conversion specifier '%c'." +msgstr "" + +#: src/format-perl-brace.c:199 src/format-python.c:471 +#: src/format-python-brace.c:434 src/format-python-brace.c:447 +#: src/format-sh.c:308 +#, c-format +msgid "a format specification for argument '%s' doesn't exist in '%s'" +msgstr "格式 ‘%s’ 的規格在 ‘%s’ 中並不存在" + +#: src/format-python.c:115 +msgid "" +"The string refers to arguments both through argument names and through " +"unnamed argument specifications." +msgstr "" + +#: src/format-python.c:354 +#, c-format +msgid "The string refers to the argument named '%s' in incompatible ways." +msgstr "" + +#: src/format-python.c:430 +#, fuzzy, c-format +msgid "" +"format specifications in '%s' expect a mapping, those in '%s' expect a tuple" +msgstr "" +"‘msgid’ 裡的規格對應的是雜湊表 (mapping),而 ‘%s’ 的卻是固定有序列 (tuple)" + +#: src/format-python.c:437 +#, fuzzy, c-format +msgid "" +"format specifications in '%s' expect a tuple, those in '%s' expect a mapping" +msgstr "" +"‘msgid’ 裡的規格對應的是固定有序列 (tuple),而 ‘%s’ 的卻是雜湊表 (mapping)" + +#: src/format-python.c:460 src/format-sh.c:297 +#, fuzzy, c-format +msgid "" +"a format specification for argument '%s', as in '%s', doesn't exist in '%s'" +msgstr "‘%2$s’ 中的引數 ‘%1$s’ 的格式在 ‘msgid’ 中並不存在" + +#: src/format-python.c:494 +#, fuzzy, c-format +msgid "" +"format specifications in '%s' and '%s' for argument '%s' are not the same" +msgstr "‘msgid’和‘%s’的引數‘%s’的格式並不相同" + +#: src/format-python-brace.c:137 +#, fuzzy, c-format +msgid "In the directive number %u, '%c' cannot start a field name." +msgstr "在第 %u 個指令,‘,’ 後面的不是數字。" + +#: src/format-python-brace.c:150 +#, fuzzy, c-format +msgid "In the directive number %u, '%c' cannot start a getattr argument." +msgstr "在第 %u 個指令,‘,’ 後面的不是數字。" + +#: src/format-python-brace.c:165 +#, fuzzy, c-format +msgid "In the directive number %u, '%c' cannot start a getitem argument." +msgstr "在第 %u 個指令,‘,’ 後面的不是數字。" + +#: src/format-python-brace.c:185 +#, fuzzy, c-format +msgid "" +"In the directive number %u, no more nesting is allowed in a format specifier." +msgstr "在第 %u 個指令,‘,’ 後面的不是數字。" + +#: src/format-python-brace.c:270 +#, fuzzy, c-format +msgid "In the directive number %u, there is an unterminated format directive." +msgstr "第 %u 個指令中的數字 0 不是正整數。" + +#: src/format-qt.c:152 +#, c-format +msgid "" +"'%s' is a simple format string, but '%s' is not: it contains an 'L' flag or " +"a double-digit argument number" +msgstr "" + +#: src/format-sh.c:79 +msgid "The string refers to a shell variable with a non-ASCII name." +msgstr "字串中的 shell 變數名稱含有不屬於 ASCII 的字元。" + +#: src/format-sh.c:81 +msgid "" +"The string refers to a shell variable with complex shell brace syntax. This " +"syntax is unsupported here due to security reasons." +msgstr "" +"字串中的 shell 變數名稱含有較複雜的括號格式,因安全理由,這種格式不會支援。" + +#: src/format-sh.c:83 +msgid "" +"The string refers to a shell variable whose value may be different inside " +"shell functions." +msgstr "" + +#: src/format-sh.c:85 +msgid "The string refers to a shell variable with an empty name." +msgstr "字串中的 shell 變數沒有名稱。" + +#: src/format-ycp.c:90 +#, c-format +msgid "" +"In the directive number %u, the character '%c' is not a digit between 1 and " +"9." +msgstr "第 %u 個指令的字元‘%c’不是 1 至 9 之間的整數。" + +#: src/format-ycp.c:91 +#, c-format +msgid "" +"The character that terminates the directive number %u is not a digit between " +"1 and 9." +msgstr "第 %u 個指令最後一個字元不是 1 至 9 之間的整數。" + +#: src/hostname.c:180 src/msgattrib.c:355 src/msgcat.c:294 src/msgcmp.c:172 +#: src/msgcomm.c:285 src/msgconv.c:244 src/msgen.c:241 src/msgexec.c:180 +#: src/msgfilter.c:282 src/msgfmt.c:416 src/msggrep.c:419 src/msginit.c:269 +#: src/msgmerge.c:356 src/msgunfmt.c:262 src/msguniq.c:264 +#: src/recode-sr-latin.c:110 src/urlget.c:143 src/xgettext.c:615 +#, c-format, no-wrap +msgid "" +"Copyright (C) %s Free Software Foundation, Inc.\n" +"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\n" +"This is free software: you are free to change and redistribute it.\n" +"There is NO WARRANTY, to the extent permitted by law.\n" +msgstr "" + +#: src/hostname.c:186 src/msgattrib.c:361 src/msgcat.c:300 src/msgcmp.c:178 +#: src/msgcomm.c:291 src/msgconv.c:250 src/msgen.c:247 src/msgexec.c:186 +#: src/msgfilter.c:288 src/msgfmt.c:422 src/msggrep.c:425 src/msginit.c:275 +#: src/msgmerge.c:362 src/msgunfmt.c:268 src/msguniq.c:270 src/urlget.c:149 +#: src/xgettext.c:621 +#, c-format +msgid "Written by %s.\n" +msgstr "由 %s 編寫。\n" + +#. This is a proper name. See the gettext manual, section Names. +#: src/hostname.c:186 src/msgattrib.c:361 src/msgcat.c:300 src/msgconv.c:250 +#: src/msgen.c:247 src/msgexec.c:186 src/msgfilter.c:288 src/msggrep.c:425 +#: src/msginit.c:275 src/msguniq.c:270 src/recode-sr-latin.c:121 +#: src/urlget.c:149 +msgid "Bruno Haible" +msgstr "" + +#: src/hostname.c:196 src/msginit.c:285 src/recode-sr-latin.c:130 +#, c-format +msgid "too many arguments" +msgstr "引數過多" + +#: src/hostname.c:209 src/msgattrib.c:417 src/msgcat.c:363 src/msgcmp.c:209 +#: src/msgcomm.c:355 src/msgconv.c:303 src/msgen.c:300 src/msgexec.c:253 +#: src/msgfilter.c:403 src/msgfmt.c:770 src/msggrep.c:512 src/msginit.c:359 +#: src/msgmerge.c:494 src/msgunfmt.c:423 src/msguniq.c:322 +#: src/recode-sr-latin.c:143 src/urlget.c:172 src/xgettext.c:851 +#, fuzzy, c-format +msgid "Try '%s --help' for more information.\n" +msgstr "請執行 ‘%s --help’ 顯示額外資訊。\n" + +#: src/hostname.c:213 src/msginit.c:363 src/recode-sr-latin.c:148 +#, c-format, no-wrap +msgid "Usage: %s [OPTION]\n" +msgstr "用法:%s [選項]\n" + +#: src/hostname.c:217 +#, c-format +msgid "Print the machine's hostname.\n" +msgstr "列印主機的名稱。\n" + +#: src/hostname.c:220 +#, c-format +msgid "Output format:\n" +msgstr "輸出格式:\n" + +#: src/hostname.c:222 +#, c-format +msgid " -s, --short short host name\n" +msgstr " -s, --short 短的主機名稱\n" + +#: src/hostname.c:224 +#, c-format +msgid "" +" -f, --fqdn, --long long host name, includes fully qualified " +"domain\n" +" name, and aliases\n" +msgstr "" +" -f, --fqdn, --long 長的主機名稱,包括正式的網域名稱(FQDN)及別名\n" + +#: src/hostname.c:227 +#, c-format +msgid " -i, --ip-address addresses for the hostname\n" +msgstr " -i, --ip-address 主機的 IP 地址\n" + +#: src/hostname.c:230 src/msgattrib.c:534 src/msgcat.c:469 src/msgcmp.c:258 +#: src/msgcomm.c:455 src/msgconv.c:385 src/msgen.c:381 src/msgexec.c:295 +#: src/msgfilter.c:495 src/msgfmt.c:916 src/msggrep.c:628 src/msginit.c:421 +#: src/msgmerge.c:619 src/msgunfmt.c:527 src/msguniq.c:417 +#: src/recode-sr-latin.c:161 src/urlget.c:186 src/xgettext.c:1023 +#, c-format, no-wrap +msgid "Informative output:\n" +msgstr "顯示資訊:\n" + +#: src/hostname.c:232 src/msgattrib.c:536 src/msgcat.c:471 src/msgcmp.c:260 +#: src/msgcomm.c:457 src/msgconv.c:387 src/msgen.c:383 src/msgexec.c:297 +#: src/msgfilter.c:497 src/msgfmt.c:918 src/msggrep.c:630 src/msginit.c:423 +#: src/msgmerge.c:621 src/msgunfmt.c:529 src/msguniq.c:419 +#: src/recode-sr-latin.c:164 src/urlget.c:188 src/xgettext.c:1025 +#, c-format, no-wrap +msgid " -h, --help display this help and exit\n" +msgstr " -h, --help 顯示本訊息,然後結束\n" + +#: src/hostname.c:234 src/msgattrib.c:538 src/msgcat.c:473 src/msgcmp.c:262 +#: src/msgcomm.c:459 src/msgconv.c:389 src/msgen.c:385 src/msgexec.c:299 +#: src/msgfilter.c:499 src/msgfmt.c:920 src/msggrep.c:632 src/msginit.c:425 +#: src/msgmerge.c:623 src/msgunfmt.c:531 src/msguniq.c:421 +#: src/recode-sr-latin.c:167 src/urlget.c:190 src/xgettext.c:1027 +#, c-format, no-wrap +msgid " -V, --version output version information and exit\n" +msgstr " -V, --version 顯示版本資訊,然後結束\n" + +#. TRANSLATORS: The placeholder indicates the bug-reporting address +#. for this package. Please add _another line_ saying +#. "Report translation bugs to <...>\n" with the address for translation +#. bugs (typically your translation team's web or email address). +#: src/hostname.c:241 src/msgattrib.c:545 src/msgcat.c:480 src/msgcmp.c:269 +#: src/msgcomm.c:466 src/msgconv.c:396 src/msgen.c:392 src/msgexec.c:306 +#: src/msgfilter.c:506 src/msgfmt.c:931 src/msggrep.c:639 src/msginit.c:432 +#: src/msgmerge.c:634 src/msgunfmt.c:540 src/msguniq.c:428 +#: src/recode-sr-latin.c:174 src/urlget.c:199 src/xgettext.c:1034 +msgid "Report bugs to <bug-gnu-gettext@gnu.org>.\n" +msgstr "請向 <bug-gnu-gettext@gnu.org> 匯報錯誤。\n" + +#: src/hostname.c:257 src/hostname.c:263 src/hostname.c:270 +#, c-format +msgid "could not get host name" +msgstr "無法取得主機名稱" + +#: src/msgattrib.c:376 src/msgconv.c:265 src/msgexec.c:152 src/msgfilter.c:194 +#: src/msggrep.c:440 src/msginit.c:198 src/msguniq.c:285 +#, c-format +msgid "at most one input file allowed" +msgstr "最多只接受一個輸入檔" + +#: src/msgattrib.c:382 src/msgcat.c:316 src/msgcomm.c:301 src/msgconv.c:271 +#: src/msgen.c:269 src/msgfilter.c:303 src/msgfmt.c:470 src/msgfmt.c:478 +#: src/msgfmt.c:493 src/msgfmt.c:515 src/msggrep.c:446 src/msgmerge.c:387 +#: src/msgmerge.c:392 src/msgmerge.c:397 src/msgmerge.c:418 src/msgunfmt.c:299 +#: src/msguniq.c:291 src/xgettext.c:631 src/xgettext.c:638 src/xgettext.c:641 +#: src/xgettext.c:644 +#, c-format +msgid "%s and %s are mutually exclusive" +msgstr "%s 和 %s 兩者是互不相容的" + +#: src/msgattrib.c:421 src/msgconv.c:307 src/msggrep.c:516 src/msguniq.c:326 +#, c-format +msgid "Usage: %s [OPTION] [INPUTFILE]\n" +msgstr "用法:%s [選項] [輸入檔]\n" + +#: src/msgattrib.c:426 +#, c-format, no-wrap +msgid "" +"Filters the messages of a translation catalog according to their attributes,\n" +"and manipulates the attributes.\n" +msgstr "根據訊息的屬性過濾翻譯檔裡的條目,並處理這些屬性。\n" + +#: src/msgattrib.c:430 src/msgcat.c:384 src/msgcmp.c:227 src/msgcomm.c:375 +#: src/msgconv.c:315 src/msgen.c:316 src/msgexec.c:276 src/msgfilter.c:415 +#: src/msggrep.c:526 src/msginit.c:373 src/msgmerge.c:515 src/msgunfmt.c:435 +#: src/msguniq.c:342 +#, c-format +msgid "" +"Mandatory arguments to long options are mandatory for short options too.\n" +msgstr "長選項必須用的引數在使用短選項時也是必須的。\n" + +#: src/msgattrib.c:433 src/msgcat.c:387 src/msgcmp.c:230 src/msgcomm.c:378 +#: src/msgconv.c:318 src/msgen.c:319 src/msgexec.c:279 src/msgfilter.c:418 +#: src/msgfmt.c:788 src/msggrep.c:529 src/msginit.c:376 src/msgmerge.c:518 +#: src/msgunfmt.c:449 src/msguniq.c:345 src/xgettext.c:869 +#, c-format +msgid "Input file location:\n" +msgstr "輸入檔位置:\n" + +#: src/msgattrib.c:435 src/msgconv.c:320 src/msggrep.c:531 src/msguniq.c:347 +#, c-format +msgid " INPUTFILE input PO file\n" +msgstr " INPUTFILE 用作輸入的 PO 檔\n" + +#: src/msgattrib.c:437 src/msgcat.c:393 src/msgcmp.c:236 src/msgcomm.c:384 +#: src/msgconv.c:322 src/msgen.c:323 src/msgexec.c:283 src/msgfilter.c:422 +#: src/msgfmt.c:792 src/msggrep.c:533 src/msgmerge.c:524 src/msguniq.c:349 +#: src/xgettext.c:875 +#, c-format +msgid "" +" -D, --directory=DIRECTORY add DIRECTORY to list for input files search\n" +msgstr " -D, --directory=目錄 搜尋輸入檔時加入指定<目錄>\n" + +#: src/msgattrib.c:439 src/msgconv.c:324 src/msgexec.c:285 src/msgfilter.c:424 +#: src/msggrep.c:535 src/msgunfmt.c:453 src/msguniq.c:351 +#, c-format +msgid "If no input file is given or if it is -, standard input is read.\n" +msgstr "如果沒有指定輸入檔或輸入檔是 ‘-’,則由標準輸入讀取內容。\n" + +#: src/msgattrib.c:442 src/msgcat.c:398 src/msgcomm.c:389 src/msgconv.c:327 +#: src/msgen.c:328 src/msgfilter.c:427 src/msgfmt.c:814 src/msggrep.c:538 +#: src/msginit.c:384 src/msgmerge.c:536 src/msgunfmt.c:489 src/msguniq.c:354 +#: src/xgettext.c:880 +#, c-format +msgid "Output file location:\n" +msgstr "輸出檔位置:\n" + +#: src/msgattrib.c:444 src/msgcat.c:400 src/msgcomm.c:391 src/msgconv.c:329 +#: src/msgen.c:330 src/msgfilter.c:429 src/msgfmt.c:816 src/msgfmt.c:865 +#: src/msggrep.c:540 src/msgmerge.c:538 src/msgunfmt.c:491 src/msguniq.c:356 +#, c-format +msgid " -o, --output-file=FILE write output to specified file\n" +msgstr " -o, --output-file=檔案 將輸出的內容寫入指定<檔案>\n" + +#: src/msgattrib.c:446 src/msgcat.c:402 src/msgcomm.c:393 src/msgconv.c:331 +#: src/msgen.c:332 src/msgfilter.c:431 src/msggrep.c:542 src/msgmerge.c:540 +#: src/msgunfmt.c:493 src/msguniq.c:358 +#, c-format +msgid "" +"The results are written to standard output if no output file is specified\n" +"or if it is -.\n" +msgstr "如果沒有指定<輸出檔>或<輸出檔>是 ‘-’,則會在標準輸出顯示結果。\n" + +#: src/msgattrib.c:450 src/msgcat.c:406 src/msgcomm.c:397 src/msguniq.c:362 +#, c-format +msgid "Message selection:\n" +msgstr "篩選訊息:\n" + +#: src/msgattrib.c:452 +#, c-format +msgid "" +" --translated keep translated, remove untranslated messages\n" +msgstr " --translated 只保留已翻譯條目,刪除未翻譯條目\n" + +#: src/msgattrib.c:454 +#, c-format +msgid "" +" --untranslated keep untranslated, remove translated messages\n" +msgstr " --untranslated 只保留未翻譯條目,刪除已翻譯條目\n" + +#: src/msgattrib.c:456 +#, c-format +msgid " --no-fuzzy remove 'fuzzy' marked messages\n" +msgstr " --no-fuzzy 刪除加上 'fuzzy' 標記的條目\n" + +#: src/msgattrib.c:458 +#, c-format +msgid " --only-fuzzy keep 'fuzzy' marked messages\n" +msgstr " --only-fuzzy 只保留加上 'fuzzy' 標記的條目\n" + +#: src/msgattrib.c:460 +#, c-format +msgid " --no-obsolete remove obsolete #~ messages\n" +msgstr " --no-obsolete 刪除過時的條目 (#~)\n" + +#: src/msgattrib.c:462 +#, c-format +msgid " --only-obsolete keep obsolete #~ messages\n" +msgstr " --only-obsolete 只保留過時的條目 (#~) \n" + +#: src/msgattrib.c:465 +#, c-format +msgid "Attribute manipulation:\n" +msgstr "處理屬性:\n" + +#: src/msgattrib.c:467 +#, c-format +msgid " --set-fuzzy set all messages 'fuzzy'\n" +msgstr " --set-fuzzy 將所有條目標記為 'fuzzy'\n" + +#: src/msgattrib.c:469 +#, c-format +msgid " --clear-fuzzy set all messages non-'fuzzy'\n" +msgstr " --clear-fuzzy 移除所有條目的 'fuzzy' 狀態\n" + +#: src/msgattrib.c:471 +#, c-format +msgid " --set-obsolete set all messages obsolete\n" +msgstr " --set-obsolete 將所有條目標記為過時\n" + +#: src/msgattrib.c:473 +#, c-format +msgid " --clear-obsolete set all messages non-obsolete\n" +msgstr " --clear-obsolete 清除所有條目的過時標記\n" + +#: src/msgattrib.c:475 +#, fuzzy, c-format +msgid "" +" --previous when setting 'fuzzy', keep previous msgids\n" +" of translated messages.\n" +msgstr "" +" -u, --unique 等於 --less-than=2,表示只顯示\n" +" 只有一種翻譯的字句\n" + +#: src/msgattrib.c:478 +#, fuzzy, c-format +msgid "" +" --clear-previous remove the \"previous msgid\" from all " +"messages\n" +msgstr " --clear-fuzzy 移除所有條目的 'fuzzy' 狀態\n" + +#: src/msgattrib.c:480 +#, fuzzy, c-format +msgid "" +" --empty when removing 'fuzzy', also set msgstr empty\n" +msgstr " --no-fuzzy 刪除加上 'fuzzy' 標記的條目\n" + +#: src/msgattrib.c:482 +#, c-format +msgid "" +" --only-file=FILE.po manipulate only entries listed in FILE.po\n" +msgstr " --only-file=FILE.po 只處理 FILE.po 裡已經有的條目\n" + +#: src/msgattrib.c:484 +#, c-format +msgid "" +" --ignore-file=FILE.po manipulate only entries not listed in FILE.po\n" +msgstr " --ignore-file=FILE.po 只處理 FILE.po 裡沒有的條目\n" + +#: src/msgattrib.c:486 +#, c-format +msgid " --fuzzy synonym for --only-fuzzy --clear-fuzzy\n" +msgstr " --fuzzy 等於 --only-fuzzy --clear-fuzzy\n" + +#: src/msgattrib.c:488 +#, c-format +msgid "" +" --obsolete synonym for --only-obsolete --clear-obsolete\n" +msgstr " --obsolete 等於 --only-obsolete --clear-obsolete\n" + +#: src/msgattrib.c:491 src/msgcat.c:418 src/msgcmp.c:250 src/msgcomm.c:409 +#: src/msgconv.c:342 src/msgen.c:336 src/msgexec.c:288 src/msgfilter.c:450 +#: src/msgfmt.c:878 src/msggrep.c:585 src/msginit.c:392 src/msgmerge.c:573 +#: src/msguniq.c:369 +#, c-format +msgid "Input file syntax:\n" +msgstr "輸入檔格式:\n" + +#: src/msgattrib.c:493 src/msgconv.c:344 src/msgen.c:338 src/msgexec.c:290 +#: src/msgfilter.c:452 src/msggrep.c:587 src/msginit.c:394 src/msguniq.c:371 +#, c-format +msgid "" +" -P, --properties-input input file is in Java .properties syntax\n" +msgstr " -P, --properties-input 以 Java .properties 格式處理輸入檔\n" + +#: src/msgattrib.c:495 src/msgconv.c:346 src/msgen.c:340 src/msgexec.c:292 +#: src/msgfilter.c:454 src/msggrep.c:589 src/msginit.c:396 src/msguniq.c:373 +#, c-format +msgid "" +" --stringtable-input input file is in NeXTstep/GNUstep .strings " +"syntax\n" +msgstr "" +" --stringtable-input 以 NeXTstep/GNUstep .strings 格式處理輸入檔\n" + +#: src/msgattrib.c:498 src/msgcat.c:426 src/msgcomm.c:417 src/msgconv.c:349 +#: src/msgen.c:343 src/msgfilter.c:457 src/msgfmt.c:906 src/msggrep.c:592 +#: src/msginit.c:399 src/msgmerge.c:581 src/msgunfmt.c:497 src/msguniq.c:376 +#: src/xgettext.c:969 +#, c-format +msgid "Output details:\n" +msgstr "輸出內容細節:\n" + +#: src/msgattrib.c:500 src/msgcat.c:435 src/msgcomm.c:419 src/msgconv.c:351 +#: src/msgen.c:347 src/msgfilter.c:459 src/msggrep.c:594 src/msginit.c:405 +#: src/msgmerge.c:585 src/msgunfmt.c:499 src/msguniq.c:383 src/xgettext.c:971 +#, c-format +msgid "" +" --color use colors and other text attributes always\n" +" --color=WHEN use colors and other text attributes if WHEN.\n" +" WHEN may be 'always', 'never', 'auto', or " +"'html'.\n" +msgstr "" + +#: src/msgattrib.c:504 src/msgcat.c:439 src/msgcomm.c:423 src/msgconv.c:355 +#: src/msgen.c:351 src/msgfilter.c:463 src/msggrep.c:598 src/msginit.c:409 +#: src/msgmerge.c:589 src/msgunfmt.c:503 src/msguniq.c:387 src/xgettext.c:975 +#, c-format +msgid " --style=STYLEFILE specify CSS style rule file for --color\n" +msgstr "" + +#: src/msgattrib.c:506 src/msgcat.c:441 src/msgcomm.c:425 src/msgconv.c:357 +#: src/msgen.c:353 src/msgmerge.c:591 src/msgunfmt.c:505 src/msguniq.c:389 +#: src/xgettext.c:977 +#, c-format +msgid "" +" -e, --no-escape do not use C escapes in output (default)\n" +msgstr "" +" -e, --no-escape 輸出結果不使用 C 轉義控制序列\n" +" (escape sequence),這是預設運作方式\n" + +#: src/msgattrib.c:508 src/msgcat.c:443 src/msgcomm.c:427 src/msgconv.c:359 +#: src/msgen.c:355 src/msgfilter.c:467 src/msgmerge.c:593 src/msgunfmt.c:507 +#: src/msguniq.c:391 src/xgettext.c:979 +#, c-format +msgid "" +" -E, --escape use C escapes in output, no extended chars\n" +msgstr "" +" -E, --escape 在輸出結果中使用 C 轉義控制序列 (escape " +"sequence)\n" +" ,而不使用非 ASCII 字元\n" + +#: src/msgattrib.c:510 src/msgcat.c:445 src/msgcomm.c:429 src/msgconv.c:361 +#: src/msgen.c:357 src/msgfilter.c:469 src/msggrep.c:604 src/msgmerge.c:595 +#: src/msgunfmt.c:509 src/msguniq.c:393 src/xgettext.c:981 +#, c-format +msgid " --force-po write PO file even if empty\n" +msgstr " --force-po 就算沒有內容仍產生 PO 檔\n" + +#: src/msgattrib.c:512 src/msgcat.c:447 src/msgcomm.c:431 src/msguniq.c:395 +#: src/xgettext.c:983 +#, c-format +msgid " -i, --indent write the .po file using indented style\n" +msgstr " -i, --indent 寫入的 .po 檔內容會進行縮排\n" + +#: src/msgattrib.c:514 src/msgcat.c:449 src/msgcomm.c:433 src/msguniq.c:397 +#: src/xgettext.c:985 +#, c-format +msgid " --no-location do not write '#: filename:line' lines\n" +msgstr " --no-location 不加入類似 '#: 檔案:行號' 的源代碼位置\n" + +#: src/msgattrib.c:516 src/msgcat.c:451 src/msgcomm.c:435 src/msguniq.c:399 +#: src/xgettext.c:987 +#, c-format +msgid "" +" -n, --add-location generate '#: filename:line' lines (default)\n" +msgstr "" +" -n, --add-location 會加入 '#: 檔案:行號' 格式的源代碼位置 (預設)\n" + +#: src/msgattrib.c:518 src/msgcat.c:453 src/msgcomm.c:437 src/msguniq.c:401 +#: src/xgettext.c:989 +#, c-format +msgid "" +" --strict write out strict Uniforum conforming .po file\n" +msgstr "" +" --strict 產生的 .po 檔內容跟隨嚴格的 Uniforum 格式\n" + +#: src/msgattrib.c:520 src/msgcat.c:455 src/msgcomm.c:439 src/msgconv.c:371 +#: src/msgen.c:367 src/msgfilter.c:481 src/msggrep.c:614 src/msginit.c:411 +#: src/msgmerge.c:605 src/msgunfmt.c:515 src/msguniq.c:403 +#, c-format +msgid " -p, --properties-output write out a Java .properties file\n" +msgstr " -p, --properties-output 產生 Java .properties 檔案\n" + +#: src/msgattrib.c:522 src/msgcat.c:457 src/msgcomm.c:441 src/msgconv.c:373 +#: src/msgen.c:369 src/msgfilter.c:483 src/msggrep.c:616 src/msginit.c:413 +#: src/msgmerge.c:607 src/msgunfmt.c:517 src/msguniq.c:405 src/xgettext.c:993 +#, c-format +msgid "" +" --stringtable-output write out a NeXTstep/GNUstep .strings file\n" +msgstr " --stringtable-output 產生 NeXTstep/GNUstep .strings 檔案\n" + +#: src/msgattrib.c:524 src/msgcat.c:459 src/msgcomm.c:443 src/msgconv.c:375 +#: src/msgen.c:371 src/msgfilter.c:485 src/msggrep.c:618 src/msginit.c:415 +#: src/msgmerge.c:609 src/msgunfmt.c:519 src/msguniq.c:407 src/xgettext.c:995 +#, c-format +msgid " -w, --width=NUMBER set output page width\n" +msgstr " -w, --width=NUMBER 指定輸出檔每行寬度\n" + +#: src/msgattrib.c:526 src/msgcat.c:461 src/msgcomm.c:445 src/msgconv.c:377 +#: src/msgen.c:373 src/msgfilter.c:487 src/msggrep.c:620 src/msginit.c:417 +#: src/msgmerge.c:611 src/msgunfmt.c:521 src/msguniq.c:409 src/xgettext.c:997 +#, c-format +msgid "" +" --no-wrap do not break long message lines, longer than\n" +" the output page width, into several lines\n" +msgstr "" +" --no-wrap 即使輸出的訊息超出頁寬,也不將輸出的訊息斷行\n" + +#: src/msgattrib.c:529 src/msgcat.c:464 src/msgcomm.c:448 src/msgconv.c:380 +#: src/msgen.c:376 src/msgfilter.c:490 src/msgmerge.c:614 src/msgunfmt.c:524 +#: src/msguniq.c:412 src/xgettext.c:1000 +#, c-format +msgid " -s, --sort-output generate sorted output\n" +msgstr " -s, --sort-output 將輸出結果排序\n" + +#: src/msgattrib.c:531 src/msgcat.c:466 src/msgcomm.c:450 src/msgconv.c:382 +#: src/msgen.c:378 src/msgfilter.c:492 src/msgmerge.c:616 src/msguniq.c:414 +#: src/xgettext.c:1002 +#, c-format +msgid " -F, --sort-by-file sort output by file location\n" +msgstr " -F, --sort-by-file 根據檔案位置排列輸出結果\n" + +#: src/msgcat.c:322 src/msgcomm.c:327 +#, c-format +msgid "impossible selection criteria specified (%d < n < %d)" +msgstr "不可能出現的選擇條件 (%d < n <%d)" + +#: src/msgcat.c:367 src/msgcomm.c:359 src/xgettext.c:855 +#, c-format +msgid "Usage: %s [OPTION] [INPUTFILE]...\n" +msgstr "用法:%s [選項] [輸入檔]...\n" + +#: src/msgcat.c:372 +#, fuzzy, c-format, no-wrap +msgid "" +"Concatenates and merges the specified PO files.\n" +"Find messages which are common to two or more of the specified PO files.\n" +"By using the --more-than option, greater commonality may be requested\n" +"before messages are printed. Conversely, the --less-than option may be\n" +"used to specify less commonality before messages are printed (i.e.\n" +"--less-than=2 will only print the unique messages). Translations,\n" +"comments, extracted comments, and file positions will be cumulated, except\n" +"that if --use-first is specified, they will be taken from the first PO file\n" +"to define them.\n" +msgstr "" +"合併指定的 PO 檔。\n" +"在兩個或多個指定的 PO 檔中找出共同的翻譯訊息。利用 --more-than 選項,可以\n" +"令訊息在不同檔案出現的次數較多才會列印。相反地,--less-than 選項則會令訊息\n" +"在不同檔案出現的次數較少才列印(例如 --less-than=2 表示列印只出現一次的訊\n" +"息)。翻譯內容、自行加上的註解和原程式碼的註解都會累積,除非使用了\n" +"--use-first 選項,那樣則會由第一個含有該翻譯條目的檔案取得資料。\n" +"所有 PO 檔中的翻譯條目的檔案位置都會累積下來。\n" + +#: src/msgcat.c:389 src/msgcomm.c:380 src/xgettext.c:871 +#, c-format +msgid " INPUTFILE ... input files\n" +msgstr " INPUTFILE ... 輸入檔\n" + +#: src/msgcat.c:391 src/msgcomm.c:382 src/xgettext.c:873 +#, c-format +msgid " -f, --files-from=FILE get list of input files from FILE\n" +msgstr " -f, --files-from=FILE 由 FILE 讀取所有輸入檔的位置\n" + +#: src/msgcat.c:395 src/msgcomm.c:386 src/msgen.c:325 src/msgfmt.c:794 +#: src/xgettext.c:877 +#, c-format +msgid "If input file is -, standard input is read.\n" +msgstr "如果輸入檔是 - 的話,會由標準輸入讀取資料。\n" + +#: src/msgcat.c:408 src/msgcomm.c:399 +#, c-format +msgid "" +" -<, --less-than=NUMBER print messages with less than this many\n" +" definitions, defaults to infinite if not set\n" +msgstr "" +" -<, --less-than=NUMBER 當一項條目的不同翻譯少於多少種就會顯示,\n" +" 預設為無限 (即顯示所有條目)\n" + +#: src/msgcat.c:411 +#, c-format +msgid "" +" ->, --more-than=NUMBER print messages with more than this many\n" +" definitions, defaults to 0 if not set\n" +msgstr "" +" ->, --more-than=NUMBER 當一項條目的不同翻譯多於多少種才會顯示,\n" +" 預設為 0 種 (即顯示所有條目)\n" + +#: src/msgcat.c:414 src/msgcomm.c:405 +#, c-format +msgid "" +" -u, --unique shorthand for --less-than=2, requests\n" +" that only unique messages be printed\n" +msgstr "" +" -u, --unique 等於 --less-than=2,表示只顯示\n" +" 只有一種翻譯的字句\n" + +#: src/msgcat.c:420 src/msgcmp.c:252 src/msgcomm.c:411 src/msgfmt.c:880 +#: src/msgmerge.c:575 +#, c-format +msgid "" +" -P, --properties-input input files are in Java .properties syntax\n" +msgstr " -P, --properties-input 輸入檔格式為 Java .properties 格式\n" + +#: src/msgcat.c:422 src/msgcmp.c:254 src/msgcomm.c:413 src/msgfmt.c:882 +#: src/msgmerge.c:577 +#, c-format +msgid "" +" --stringtable-input input files are in NeXTstep/GNUstep .strings\n" +" syntax\n" +msgstr "" +" --stringtable-input 輸入檔格式為 NeXTstep/GNUstep .strings 格式\n" + +#: src/msgcat.c:428 src/msgconv.c:337 src/msguniq.c:378 +#, c-format +msgid " -t, --to-code=NAME encoding for output\n" +msgstr " -t, --to-code=名稱 輸出的編碼\n" + +#: src/msgcat.c:430 src/msguniq.c:380 +#, c-format +msgid "" +" --use-first use first available translation for each\n" +" message, don't merge several translations\n" +msgstr "" +" --use-first 每句只使用第一個出現的翻譯,而不會將所有\n" +" 翻譯合併起來\n" + +#: src/msgcat.c:433 src/msgen.c:345 src/msgmerge.c:583 +#, c-format +msgid "" +" --lang=CATALOGNAME set 'Language' field in the header entry\n" +msgstr "" + +#. This is a proper name. See the gettext manual, section Names. +#: src/msgcmp.c:178 src/msgcomm.c:291 src/msgmerge.c:362 +msgid "Peter Miller" +msgstr "" + +#: src/msgcmp.c:189 src/msgmerge.c:373 +#, c-format +msgid "no input files given" +msgstr "未指定輸入檔" + +#: src/msgcmp.c:194 src/msgmerge.c:378 +#, c-format +msgid "exactly 2 input files required" +msgstr "需要恰好指定兩個輸入檔" + +#: src/msgcmp.c:213 src/msgmerge.c:498 +#, c-format +msgid "Usage: %s [OPTION] def.po ref.pot\n" +msgstr "用法:%s [選項] def.po ref.pot\n" + +#: src/msgcmp.c:218 +#, c-format, no-wrap +msgid "" +"Compare two Uniforum style .po files to check that both contain the same\n" +"set of msgid strings. The def.po file is an existing PO file with the\n" +"translations. The ref.pot file is the last created PO file, or a PO Template\n" +"file (generally created by xgettext). This is useful for checking that\n" +"you have translated each and every message in your program. Where an exact\n" +"match cannot be found, fuzzy matching is used to produce better diagnostics.\n" +msgstr "" +"比較兩個 Uniforum 格式的 .po 檔案,檢查兩者是否含有相同的 msgid 欄位。\n" +"def.po 是翻譯過的舊 PO 檔,ref.pot 則是新建立的 PO 檔或是 POT 檔\n" +"(通常由 xgettext 產生)。\n" +"此程式可用來檢查程式中的所有的訊息是否都已經翻譯好了。比較時如果\n" +"有不完全配合的字串出現,程式會以模糊配對的方式得出較好的結果。\n" + +#: src/msgcmp.c:232 +#, c-format +msgid " def.po translations\n" +msgstr " def.po 翻譯檔\n" + +#: src/msgcmp.c:234 +#, c-format +msgid " ref.pot references to the sources\n" +msgstr " ref.pot 未翻譯檔案\n" + +#: src/msgcmp.c:239 src/msgmerge.c:564 +#, c-format +msgid "Operation modifiers:\n" +msgstr "運作模式有關選項:\n" + +#: src/msgcmp.c:241 src/msgmerge.c:566 +#, c-format +msgid "" +" -m, --multi-domain apply ref.pot to each of the domains in def." +"po\n" +msgstr "" +" -m, --multi-domain 將 ref.pot 套用於 def.po 中的每一個領域\n" + +#: src/msgcmp.c:243 src/msgmerge.c:568 +#, c-format +msgid " -N, --no-fuzzy-matching do not use fuzzy matching\n" +msgstr " -N, --no-fuzzy-matching 不進行模糊字串配對\n" + +#: src/msgcmp.c:245 +#, fuzzy, c-format +msgid " --use-fuzzy consider fuzzy entries\n" +msgstr " -f, --use-fuzzy 在輸出結果中顯示模糊翻譯\n" + +#: src/msgcmp.c:247 +#, fuzzy, c-format +msgid " --use-untranslated consider untranslated entries\n" +msgstr " --untranslated 只保留未翻譯條目,刪除已翻譯條目\n" + +#: src/msgcmp.c:324 +#, fuzzy, c-format +msgid "this message is untranslated" +msgstr "警告:沒有使用這個訊息" + +#: src/msgcmp.c:330 +#, c-format +msgid "this message needs to be reviewed by the translator" +msgstr "" + +#: src/msgcmp.c:369 src/msgmerge.c:1518 +#, c-format +msgid "this message is used but not defined..." +msgstr "這個訊息有使用過但沒有定義..." + +#: src/msgcmp.c:372 src/msgmerge.c:1521 +#, c-format +msgid "...but this definition is similar" +msgstr "...但這個定義很相似" + +#: src/msgcmp.c:377 src/msgmerge.c:1549 +#, c-format +msgid "this message is used but not defined in %s" +msgstr "這個訊息有使用過但在 %s 中沒有定義" + +#: src/msgcmp.c:546 +#, c-format +msgid "warning: this message is not used" +msgstr "警告:沒有使用這個訊息" + +#: src/msgcmp.c:553 src/msgfmt.c:652 src/msgfmt.c:1443 +#, c-format +msgid "found %d fatal error" +msgid_plural "found %d fatal errors" +msgstr[0] "找到 %d 個嚴重錯誤" + +#: src/msgcomm.c:316 +#, c-format +msgid "at least two files must be specified" +msgstr "必須指定至少兩個檔案" + +#: src/msgcomm.c:364 +#, fuzzy, c-format, no-wrap +msgid "" +"Find messages which are common to two or more of the specified PO files.\n" +"By using the --more-than option, greater commonality may be requested\n" +"before messages are printed. Conversely, the --less-than option may be\n" +"used to specify less commonality before messages are printed (i.e.\n" +"--less-than=2 will only print the unique messages). Translations,\n" +"comments and extracted comments will be preserved, but only from the first\n" +"PO file to define them. File positions from all PO files will be\n" +"cumulated.\n" +msgstr "" +"在兩個或多個指定的 PO 檔中找出共同的翻譯訊息。利用 --more-than 選項,可以\n" +"令訊息在不同檔案出現的次數較多才會列印。相反地,--less-than 選項則會令訊息\n" +"在不同檔案出現的次數較少才列印(例如 --less-than=2 表示列印只出現一次的\n" +"訊息)。翻譯內容、自行加上的註解和原程式碼的註解都會保留,但只會由第一個\n" +"含有該翻譯條目的檔案取得。所有 PO 檔中的翻譯條目的檔案位置都會累積下來。\n" + +#: src/msgcomm.c:402 +#, c-format +msgid "" +" ->, --more-than=NUMBER print messages with more than this many\n" +" definitions, defaults to 1 if not set\n" +msgstr "" +" ->, --more-than=NUMBER 顯示出現多於指定次數的字句,預設為 1 次\n" + +#: src/msgcomm.c:452 src/xgettext.c:1004 +#, fuzzy, c-format +msgid "" +" --omit-header don't write header with 'msgid \"\"' entry\n" +msgstr " --omit-header 不顯示標頭 (即 ‘msgid \"\"’ 項目)\n" + +#: src/msgconv.c:311 +#, c-format +msgid "Converts a translation catalog to a different character encoding.\n" +msgstr "將一個翻譯檔的編碼轉換為另一種文字編碼。\n" + +#: src/msgconv.c:335 +#, c-format +msgid "Conversion target:\n" +msgstr "轉換目標:\n" + +#: src/msgconv.c:339 +#, c-format +msgid "The default encoding is the current locale's encoding.\n" +msgstr "預設的編碼為目前語言的編碼。\n" + +#: src/msgconv.c:363 src/msgen.c:359 src/msgmerge.c:597 +#, c-format +msgid " -i, --indent indented output style\n" +msgstr " -i, --indent 將輸出結果進行縮排\n" + +#: src/msgconv.c:365 src/msgen.c:361 src/msgfilter.c:475 src/msggrep.c:608 +#: src/msgmerge.c:599 +#, c-format +msgid " --no-location suppress '#: filename:line' lines\n" +msgstr " --no-location 不輸出源代碼位置\n" + +#: src/msgconv.c:367 src/msgen.c:363 src/msgfilter.c:477 src/msggrep.c:610 +#: src/msgmerge.c:601 +#, fuzzy, c-format +msgid "" +" -n, --add-location preserve '#: filename:line' lines (default)\n" +msgstr " --add-location 保留源代碼位置 (預設)\n" + +#: src/msgconv.c:369 src/msgen.c:365 src/msgfilter.c:479 src/msggrep.c:612 +#: src/msgmerge.c:603 +#, c-format +msgid " --strict strict Uniforum output style\n" +msgstr " --strict 嚴格遵從 Uniforum 格式\n" + +#: src/msgen.c:258 src/msgfmt.c:433 src/xgettext.c:661 +#, c-format +msgid "no input file given" +msgstr "未指定輸入檔" + +#: src/msgen.c:263 +#, c-format +msgid "exactly one input file required" +msgstr "需要恰好指定一個輸入檔" + +#: src/msgen.c:304 +#, c-format +msgid "Usage: %s [OPTION] INPUTFILE\n" +msgstr "用法:%s [選項] 輸入檔\n" + +#: src/msgen.c:309 +#, c-format, no-wrap +msgid "" +"Creates an English translation catalog. The input file is the last\n" +"created English PO file, or a PO Template file (generally created by\n" +"xgettext). Untranslated entries are assigned a translation that is\n" +"identical to the msgid.\n" +msgstr "" +"產生英文翻譯檔。輸入檔可以是 PO 檔或 POT 檔 (通常由 xgettext 產生)。\n" +"未翻譯的條目會填上和 msgid 一樣的字串。\n" + +#: src/msgen.c:321 +#, c-format +msgid " INPUTFILE input PO or POT file\n" +msgstr " 輸入檔 作為輸入的 PO 或 POT 檔\n" + +#: src/msgexec.c:196 +#, c-format +msgid "missing command name" +msgstr "缺少了指令名稱" + +#: src/msgexec.c:257 +#, c-format +msgid "Usage: %s [OPTION] COMMAND [COMMAND-OPTION]\n" +msgstr "用法:%s [選項] 指令 [指令選項]\n" + +#: src/msgexec.c:262 +#, c-format, no-wrap +msgid "" +"Applies a command to all translations of a translation catalog.\n" +"The COMMAND can be any program that reads a translation from standard\n" +"input. It is invoked once for each translation. Its output becomes\n" +"msgexec's output. msgexec's return code is the maximum return code\n" +"across all invocations.\n" +msgstr "" +"以翻譯檔的所有翻譯條目內容作為某指令的輸入資料。\n" +"<指令>可以是任何由標準輸入讀入翻譯條目的程式。\n" +"對於每個翻譯條目指令都會執行一次。它的輸出結果\n" +"即是 msgexec 的輸出結果。msgexec 的回傳值是所有\n" +"指令執行的回傳值的最大值。\n" + +#: src/msgexec.c:271 +#, c-format, no-wrap +msgid "" +"A special builtin command called '0' outputs the translation, followed by a\n" +"null byte. The output of \"msgexec 0\" is suitable as input for \"xargs -0\".\n" +msgstr "" +"有一個稱為 '0' 的特殊內置指令,它會輸出所有翻譯條目,並隨後加上 null 位元。\n" +"“msgexec 0” 的輸出適用於作為 “xargs -0” 的輸入。\n" + +#: src/msgexec.c:281 src/msgfilter.c:420 +#, c-format +msgid " -i, --input=INPUTFILE input PO file\n" +msgstr " -i, --input=INPUTFILE 作為輸入的 PO 檔\n" + +#: src/msgexec.c:345 +#, c-format +msgid "write to stdout failed" +msgstr "寫入至標準輸出時發生錯誤" + +#: src/msgfilter.c:298 +#, c-format +msgid "missing filter name" +msgstr "未指定過濾器" + +#: src/msgfilter.c:318 +#, c-format +msgid "at least one sed script must be specified" +msgstr "必須指定至少一個 sed script" + +#: src/msgfilter.c:407 +#, c-format +msgid "Usage: %s [OPTION] FILTER [FILTER-OPTION]\n" +msgstr "用法:%s [選項] 過濾器 [過濾器選項]\n" + +#: src/msgfilter.c:411 +#, c-format +msgid "Applies a filter to all translations of a translation catalog.\n" +msgstr "對於翻譯檔中的所有翻譯條目進行過濾。\n" + +#: src/msgfilter.c:435 +#, c-format +msgid "" +"The FILTER can be any program that reads a translation from standard input\n" +"and writes a modified translation to standard output.\n" +msgstr "" +"<過濾器>可以是任何由標準輸入讀入翻譯條目\n" +"並將修改後的翻譯寫進標準輸出的程式。\n" + +#: src/msgfilter.c:440 +#, c-format +msgid "Useful FILTER-OPTIONs when the FILTER is 'sed':\n" +msgstr "當<過濾器>是 ‘sed’ 時一些比較有用的選項:\n" + +#: src/msgfilter.c:442 +#, c-format +msgid "" +" -e, --expression=SCRIPT add SCRIPT to the commands to be executed\n" +msgstr "" + +#: src/msgfilter.c:444 +#, c-format +msgid "" +" -f, --file=SCRIPTFILE add the contents of SCRIPTFILE to the " +"commands\n" +" to be executed\n" +msgstr "" + +#: src/msgfilter.c:447 +#, c-format +msgid "" +" -n, --quiet, --silent suppress automatic printing of pattern space\n" +msgstr " -n, --quiet, --silent 不會自動顯示過濾後的結果\n" + +#: src/msgfilter.c:465 src/msggrep.c:600 +#, c-format +msgid "" +" --no-escape do not use C escapes in output (default)\n" +msgstr "" +" --no-escape 輸出結果不使用 C 轉義控制序列\n" +" (escape sequence),這是預設運作方式\n" + +#: src/msgfilter.c:471 src/msggrep.c:606 +#, c-format +msgid " --indent indented output style\n" +msgstr " --indent 將輸出結果進行縮排\n" + +#: src/msgfilter.c:473 +#, c-format +msgid "" +" --keep-header keep header entry unmodified, don't filter it\n" +msgstr " --keep-header 保護標頭內容,過濾內容時不會被更改\n" + +#: src/msgfmt.c:345 +#, c-format +msgid "the argument to %s should be a single punctuation character" +msgstr "%s 的引數應該是一個標點符號" + +#: src/msgfmt.c:392 +#, c-format +msgid "invalid endianness: %s" +msgstr "" + +#. This is a proper name. See the gettext manual, section Names. +#: src/msgfmt.c:422 src/msgunfmt.c:268 src/xgettext.c:621 +msgid "Ulrich Drepper" +msgstr "" + +#: src/msgfmt.c:439 +#, fuzzy, c-format +msgid "no input file should be given if %s and %s are specified" +msgstr "如果沒有指定輸入檔或輸入檔是 ‘-’,則由標準輸入讀取內容。\n" + +#: src/msgfmt.c:484 src/msgfmt.c:506 src/msgfmt.c:528 src/msgunfmt.c:330 +#: src/msgunfmt.c:353 +#, c-format +msgid "%s requires a \"-d directory\" specification" +msgstr "%s 需要指定 “-d 目錄” 選項" + +#: src/msgfmt.c:499 src/msgfmt.c:521 src/msgfmt.c:556 src/msgunfmt.c:323 +#: src/msgunfmt.c:346 +#, c-format +msgid "%s requires a \"-l locale\" specification" +msgstr "%s 需要指定 “-l locale” 選項" + +#: src/msgfmt.c:538 +#, fuzzy, c-format +msgid "%s requires a \"--template template\" specification" +msgstr "%s 需要指定 “-l locale” 選項" + +#: src/msgfmt.c:545 +#, fuzzy, c-format +msgid "%s requires a \"-o file\" specification" +msgstr "%s 需要指定 “-l locale” 選項" + +#: src/msgfmt.c:551 +#, fuzzy, c-format +msgid "%s and %s are mutually exclusive in %s" +msgstr "%s 和 %s 兩者是互不相容的" + +#: src/msgfmt.c:565 src/msgunfmt.c:362 src/msgunfmt.c:368 +#, c-format +msgid "%s is only valid with %s or %s" +msgstr "%s 只能配合 %s 或 %s 一起使用才有效" + +#: src/msgfmt.c:571 src/msgfmt.c:577 +#, c-format +msgid "%s is only valid with %s, %s or %s" +msgstr "%s 只能配合 %s、%s 或 %s 一起使用才有效" + +#. TRANSLATORS: The prefix before a statistics message. The argument +#. is a file name or a comma separated list of file names. +#: src/msgfmt.c:740 +#, c-format +msgid "%s: " +msgstr "" + +#: src/msgfmt.c:744 +#, c-format +msgid "%d translated message" +msgid_plural "%d translated messages" +msgstr[0] "已翻譯 %d 個條目" + +#: src/msgfmt.c:749 +#, c-format +msgid ", %d fuzzy translation" +msgid_plural ", %d fuzzy translations" +msgstr[0] ",有 %d 個條目標記為模糊翻譯" + +#: src/msgfmt.c:754 +#, c-format +msgid ", %d untranslated message" +msgid_plural ", %d untranslated messages" +msgstr[0] ",還有 %d 個條目未翻譯" + +#: src/msgfmt.c:774 +#, c-format +msgid "Usage: %s [OPTION] filename.po ...\n" +msgstr "用法:%s [選項] filename.po ...\n" + +#: src/msgfmt.c:778 +#, c-format +msgid "Generate binary message catalog from textual translation description.\n" +msgstr "由文字模式翻譯檔產生二元碼翻譯檔。\n" + +#: src/msgfmt.c:783 src/xgettext.c:864 +#, c-format, no-wrap +msgid "" +"Mandatory arguments to long options are mandatory for short options too.\n" +"Similarly for optional arguments.\n" +msgstr "長選項必要的引數在使用短選項時也是必要的。對於選擇性的引數也一樣。\n" + +#: src/msgfmt.c:790 +#, c-format +msgid " filename.po ... input files\n" +msgstr " filename.po ... 輸入檔\n" + +#: src/msgfmt.c:797 src/msgmerge.c:530 src/msgunfmt.c:438 src/xgettext.c:913 +#, c-format +msgid "Operation mode:\n" +msgstr "操作模式:\n" + +#: src/msgfmt.c:799 +#, c-format +msgid "" +" -j, --java Java mode: generate a Java ResourceBundle " +"class\n" +msgstr "" +" -j, --java Java 模式:產生 Java ResourceBundle class\n" + +#: src/msgfmt.c:801 +#, c-format +msgid "" +" --java2 like --java, and assume Java2 (JDK 1.2 or " +"higher)\n" +msgstr "" +" --java2 類似 --java,假設格式為 Java2 (JDK 1.2 或以" +"上)\n" + +#: src/msgfmt.c:803 +#, c-format +msgid " --csharp C# mode: generate a .NET .dll file\n" +msgstr " --csharp C# 模式,會產生 .NET .dll 檔\n" + +#: src/msgfmt.c:805 +#, c-format +msgid "" +" --csharp-resources C# resources mode: generate a .NET .resources " +"file\n" +msgstr "" +" --csharp-resources C# resources 模式,會產生 .NET .resources 檔" +"案\n" + +#: src/msgfmt.c:807 +#, c-format +msgid "" +" --tcl Tcl mode: generate a tcl/msgcat .msg file\n" +msgstr " --tcl Tcl 模式:產生 tcl/msgcat .msg 檔\n" + +#: src/msgfmt.c:809 +#, c-format +msgid " --qt Qt mode: generate a Qt .qm file\n" +msgstr " --qt Qt 模式:產生 Qt .qm 檔\n" + +#: src/msgfmt.c:811 +#, fuzzy, c-format +msgid "" +" --desktop Desktop Entry mode: generate a .desktop file\n" +msgstr " --qt Qt 模式:產生 Qt .qm 檔\n" + +#: src/msgfmt.c:818 +#, c-format +msgid " --strict enable strict Uniforum mode\n" +msgstr " --strict 強制使用 Uniforum 格式翻譯檔\n" + +#: src/msgfmt.c:820 src/xgettext.c:888 +#, c-format +msgid "If output file is -, output is written to standard output.\n" +msgstr "如果輸出檔是 - 的話,則會在標準輸出顯示結果。\n" + +#: src/msgfmt.c:823 +#, c-format +msgid "Output file location in Java mode:\n" +msgstr "Java 模式的輸出檔位置:\n" + +#: src/msgfmt.c:825 src/msgfmt.c:841 src/msgunfmt.c:458 src/msgunfmt.c:469 +#, c-format +msgid " -r, --resource=RESOURCE resource name\n" +msgstr " -r, --resource=RESOURCE resource 名稱\n" + +#: src/msgfmt.c:827 src/msgfmt.c:843 src/msgfmt.c:853 src/msgfmt.c:863 +#: src/msgunfmt.c:460 src/msgunfmt.c:471 src/msgunfmt.c:481 +#, c-format +msgid "" +" -l, --locale=LOCALE locale name, either language or " +"language_COUNTRY\n" +msgstr "" +" -l, --locale=LOCALE 指定語言,可以用語言名稱或者 xy_XY 格式的\n" +" 語言代號\n" + +#: src/msgfmt.c:829 +#, fuzzy, c-format +msgid "" +" --source produce a .java file, instead of a .class " +"file\n" +msgstr "" +" --tcl Tcl 模式:輸入資料是 tcl/msgcat .msg 檔\n" + +#: src/msgfmt.c:831 +#, c-format +msgid "" +" -d DIRECTORY base directory of classes directory hierarchy\n" +msgstr " -d 目錄 class 目錄層的基本目錄\n" + +#: src/msgfmt.c:833 +#, c-format +msgid "" +"The class name is determined by appending the locale name to the resource " +"name,\n" +"separated with an underscore. The -d option is mandatory. The class is\n" +"written under the specified directory.\n" +msgstr "" +"class 名稱是由語言名稱和 resource 名稱合併來決定的,兩者之間會用底線分隔。\n" +"-d 選項是必須的。class 檔會存放在指定的目錄。\n" + +#: src/msgfmt.c:839 +#, c-format +msgid "Output file location in C# mode:\n" +msgstr "C# 模式的輸出檔位置:\n" + +#: src/msgfmt.c:845 src/msgunfmt.c:473 +#, c-format +msgid "" +" -d DIRECTORY base directory for locale dependent .dll " +"files\n" +msgstr "" + +#: src/msgfmt.c:847 +#, c-format +msgid "" +"The -l and -d options are mandatory. The .dll file is written in a\n" +"subdirectory of the specified directory whose name depends on the locale.\n" +msgstr "" + +#: src/msgfmt.c:851 +#, c-format +msgid "Output file location in Tcl mode:\n" +msgstr "Tcl 模式的輸出檔位置:\n" + +#: src/msgfmt.c:855 src/msgunfmt.c:483 +#, c-format +msgid " -d DIRECTORY base directory of .msg message catalogs\n" +msgstr "" + +#: src/msgfmt.c:857 +#, c-format +msgid "" +"The -l and -d options are mandatory. The .msg file is written in the\n" +"specified directory.\n" +msgstr "" + +#: src/msgfmt.c:861 +#, c-format +msgid "Desktop Entry mode options:\n" +msgstr "" + +#: src/msgfmt.c:867 +#, c-format +msgid " --template=TEMPLATE a .desktop file used as a template\n" +msgstr "" + +#: src/msgfmt.c:869 +#, fuzzy, c-format +msgid " -d DIRECTORY base directory of .po files\n" +msgstr " -d 目錄 class 目錄層的基本目錄\n" + +#: src/msgfmt.c:871 src/xgettext.c:934 +#, fuzzy, c-format +msgid "" +" -kWORD, --keyword=WORD look for WORD as an additional keyword\n" +" -k, --keyword do not to use default keywords\n" +msgstr "" +" -k, --keyword[=WORD] 要留意的額外關鍵字 (如果沒有指定,\n" +" 表示不使用預設的關鍵字)\n" + +#: src/msgfmt.c:874 +#, c-format +msgid "" +"The -l, -o, and --template options are mandatory. If -D is specified, " +"input\n" +"files are read from the directory instead of the command line arguments.\n" +msgstr "" + +#: src/msgfmt.c:886 src/xgettext.c:905 +#, c-format +msgid "Input file interpretation:\n" +msgstr "輸入檔處理:\n" + +#: src/msgfmt.c:888 +#, c-format +msgid "" +" -c, --check perform all the checks implied by\n" +" --check-format, --check-header, --check-" +"domain\n" +msgstr "" +" -c, --check 進行以下所有的檢查:\n" +" --check-format, --check-header, --check-" +"domain\n" + +#: src/msgfmt.c:891 +#, c-format +msgid " --check-format check language dependent format strings\n" +msgstr " --check-format 檢查各種程式語言的格式字串\n" + +#: src/msgfmt.c:893 +#, c-format +msgid "" +" --check-header verify presence and contents of the header " +"entry\n" +msgstr " --check-header 確保標頭欄位存在和內容正確\n" + +#: src/msgfmt.c:895 +#, c-format +msgid "" +" --check-domain check for conflicts between domain directives\n" +" and the --output-file option\n" +msgstr "" +" --check-domain 檢查 domain 關鍵字和 --output-file 選項之間\n" +" 有沒有衝突\n" + +#: src/msgfmt.c:898 +#, c-format +msgid "" +" -C, --check-compatibility check that GNU msgfmt behaves like X/Open " +"msgfmt\n" +msgstr "" +" -C, --check-compatibility 確保 GNU msgfmt 運作的方式和 X/Open msgfmt 兼" +"容\n" + +#: src/msgfmt.c:900 +#, c-format +msgid "" +" --check-accelerators[=CHAR] check presence of keyboard accelerators " +"for\n" +" menu items\n" +msgstr " --check-accelerators[=CHAR] 檢查選單項目中代表捷徑鍵的字元\n" + +#: src/msgfmt.c:903 +#, c-format +msgid " -f, --use-fuzzy use fuzzy entries in output\n" +msgstr " -f, --use-fuzzy 在輸出結果中顯示模糊翻譯\n" + +#: src/msgfmt.c:908 +#, c-format +msgid "" +" -a, --alignment=NUMBER align strings to NUMBER bytes (default: %d)\n" +msgstr "" +" -a, --alignment=數字 以<數字>個位元組為單位配置字串位置(預設:%d)\n" + +#: src/msgfmt.c:910 +#, c-format +msgid "" +" --endianness=BYTEORDER write out 32-bit numbers in the given byte " +"order\n" +" (big or little, default depends on " +"platform)\n" +msgstr "" + +#: src/msgfmt.c:913 +#, c-format +msgid "" +" --no-hash binary file will not include the hash table\n" +msgstr "" +" --no-hash 二元碼檔不會包含雜湊表 (hash table) 在內\n" + +#: src/msgfmt.c:922 +#, c-format +msgid " --statistics print statistics about translations\n" +msgstr " --statistics 顯示有關翻譯訊息的統計\n" + +#: src/msgfmt.c:924 src/msgmerge.c:625 src/msgunfmt.c:533 +#, c-format +msgid " -v, --verbose increase verbosity level\n" +msgstr " -v, --verbose 顯示詳細資訊\n" + +#: src/msgfmt.c:1037 +#, c-format +msgid "warning: PO file header missing or invalid\n" +msgstr "警告:缺少了 PO 檔的標頭或是格式無效\n" + +#: src/msgfmt.c:1040 +#, c-format +msgid "warning: charset conversion will not work\n" +msgstr "警告:字元集轉換的功能不會生效\n" + +#: src/msgfmt.c:1050 +#, c-format +msgid "warning: PO file header fuzzy\n" +msgstr "警告:PO 檔的標頭仍然是模糊狀態\n" + +#: src/msgfmt.c:1052 +#, c-format +msgid "warning: older versions of msgfmt will give an error on this\n" +msgstr "警告:較舊版本的 msgfmt 遇到此檔案時會印出錯誤訊息\n" + +#: src/msgfmt.c:1076 +#, c-format +msgid "domain name \"%s\" not suitable as file name" +msgstr "領域名稱 %s 不適合作為檔案名稱" + +#: src/msgfmt.c:1081 +#, c-format +msgid "domain name \"%s\" not suitable as file name: will use prefix" +msgstr "領域名稱 %s 不適合作為檔案名稱:將使用字首" + +#: src/msgfmt.c:1095 +#, fuzzy, c-format +msgid "'domain %s' directive ignored" +msgstr "忽略‘domain %s’指令" + +#: src/msgfmt.c:1155 +#, fuzzy, c-format +msgid "empty 'msgstr' entry ignored" +msgstr "忽略空的‘msgstr’欄位" + +#: src/msgfmt.c:1156 +#, fuzzy, c-format +msgid "fuzzy 'msgstr' entry ignored" +msgstr "忽略模糊的‘msgstr’欄位" + +#: src/msgfmt.c:1205 +#, c-format +msgid "%s: warning: source file contains fuzzy translation" +msgstr "%s:警告:原始檔包含模糊翻譯條目" + +#: src/msgfmt.c:1323 +#, c-format +msgid "%s does not exist" +msgstr "" + +#: src/msgfmt.c:1334 +#, c-format +msgid "%s exists but cannot read" +msgstr "" + +#: src/msggrep.c:258 src/po-lex.c:657 src/read-mo.c:87 +#: src/read-properties.c:89 src/read-stringtable.c:98 src/x-awk.c:139 +#: src/x-c.c:486 src/x-csharp.c:163 src/x-elisp.c:145 src/x-glade.c:565 +#: src/x-java.c:181 src/x-javascript.c:171 src/x-librep.c:147 src/x-lisp.c:212 +#: src/x-lua.c:173 src/x-perl.c:227 src/x-perl.c:302 src/x-perl.c:395 +#: src/x-php.c:163 src/x-python.c:176 src/x-rst.c:233 src/x-scheme.c:171 +#: src/x-sh.c:155 src/x-smalltalk.c:91 src/x-tcl.c:150 src/x-vala.c:176 +#: src/x-ycp.c:91 +#, c-format +msgid "error while reading \"%s\"" +msgstr "讀取 %s 時出現錯誤" + +#: src/msggrep.c:501 +#, fuzzy, c-format +msgid "" +"option '%c' cannot be used before 'J' or 'K' or 'T' or 'C' or 'X' has been " +"specified" +msgstr "未指定 ‘K’、‘T’ 或 ‘C’ 選項前不能使用選項 ‘%c’" + +#: src/msggrep.c:521 +#, c-format, no-wrap +msgid "" +"Extracts all messages of a translation catalog that match a given pattern\n" +"or belong to some given source files.\n" +msgstr "抽取翻譯檔中的訊息,而這些訊息符合某種樣式或屬於某個指定的來源檔。\n" + +#: src/msggrep.c:547 +#, fuzzy, c-format, no-wrap +msgid "" +"Message selection:\n" +" [-N SOURCEFILE]... [-M DOMAINNAME]...\n" +" [-J MSGCTXT-PATTERN] [-K MSGID-PATTERN] [-T MSGSTR-PATTERN]\n" +" [-C COMMENT-PATTERN] [-X EXTRACTED-COMMENT-PATTERN]\n" +"A message is selected if it comes from one of the specified source files,\n" +"or if it comes from one of the specified domains,\n" +"or if -J is given and its context (msgctxt) matches MSGCTXT-PATTERN,\n" +"or if -K is given and its key (msgid or msgid_plural) matches MSGID-PATTERN,\n" +"or if -T is given and its translation (msgstr) matches MSGSTR-PATTERN,\n" +"or if -C is given and the translator's comment matches COMMENT-PATTERN,\n" +"or if -X is given and the extracted comment matches EXTRACTED-COMMENT-PATTERN.\n" +"\n" +"When more than one selection criterion is specified, the set of selected\n" +"messages is the union of the selected messages of each criterion.\n" +"\n" +"MSGCTXT-PATTERN or MSGID-PATTERN or MSGSTR-PATTERN or COMMENT-PATTERN or\n" +"EXTRACTED-COMMENT-PATTERN syntax:\n" +" [-E | -F] [-e PATTERN | -f FILE]...\n" +"PATTERNs are basic regular expressions by default, or extended regular\n" +"expressions if -E is given, or fixed strings if -F is given.\n" +"\n" +" -N, --location=SOURCEFILE select messages extracted from SOURCEFILE\n" +" -M, --domain=DOMAINNAME select messages belonging to domain DOMAINNAME\n" +" -J, --msgctxt start of patterns for the msgctxt\n" +" -K, --msgid start of patterns for the msgid\n" +" -T, --msgstr start of patterns for the msgstr\n" +" -C, --comment start of patterns for the translator's comment\n" +" -X, --extracted-comment start of patterns for the extracted comment\n" +" -E, --extended-regexp PATTERN is an extended regular expression\n" +" -F, --fixed-strings PATTERN is a set of newline-separated strings\n" +" -e, --regexp=PATTERN use PATTERN as a regular expression\n" +" -f, --file=FILE obtain PATTERN from FILE\n" +" -i, --ignore-case ignore case distinctions\n" +" -v, --invert-match output only the messages that do not match any\n" +" selection criterion\n" +msgstr "" +"訊息選擇:\n" +" [-N SOURCEFILE]... [-M DOMAINNAME]...\n" +" [-K MSGID-PATTERN] [-T MSGSTR-PATTERN] [-C COMMENT-PATTERN]\n" +"\n" +"程式會依據以下其中一個標準來選擇翻譯訊息:\n" +"* 指定的原始檔\n" +"* 指定的文字領域\n" +"* 使用了選項 -K,而原文 (msgid or msgid_plural) 符合 MSGID-PATTERN\n" +"* 使用了選項 -T,而翻譯字句 (msgstr) 符合 MSGSTR-PATTERN\n" +"* 使用了選項 -C,而翻譯註解符合 COMMENT-PATTERN\n" +"\n" +"若指定了兩個或以上的選擇標準,訊息最少只要符合其中一個標準就已經足夠。\n" +"\n" +"MSGID-PATTERN 或 MSGSTR-PATTERN 或 COMMENT-PATTERN 的語法:\n" +" [-E | -F] [-e PATTERN | -f FILE]...\n" +"PATTERN 內定是基礎常規運算式 (basic regular expression),\n" +"如果指定 -E 則是延伸常規運算式 (extended regular expression),\n" +"如果指定 -F 則是普通字串。\n" +"\n" +" -N, --location=SOURCEFILE 選擇自 SOURCEFILE 抽取出來的翻譯訊息\n" +" -M, --domain=DOMAINNAME 選擇屬於 DOMAINNAME 領域的翻譯訊息\n" +" -K, --msgid 指定符合 msgid 的樣式\n" +" -T, --msgstr 指定符合 msgstr 的樣式\n" +" -C, --comment 指定符合翻譯註釋的樣式\n" +" -E, --extended-regexp 指定 PATTERN 為延伸常規運算式\n" +" -F, --fixed-strings 指定 PATTERN 為普通字串\n" +" -e, --regexp=PATTERN 指定 PATTERN 為基礎常規運算式\n" +" -f, --file=FILE PATTERN 採用 FILE 的內容 \n" +" -i, --ignore-case 不區分大小寫\n" + +#: src/msggrep.c:602 +#, c-format +msgid "" +" --escape use C escapes in output, no extended chars\n" +msgstr "" +" --escape 在輸出結果中使用 C 轉義控制序列 (escape " +"sequence)\n" +" ,而不使用非 ASCII 字元\n" + +#: src/msggrep.c:623 +#, c-format +msgid " --sort-output generate sorted output\n" +msgstr " --sort-output 將訊息排序\n" + +#: src/msggrep.c:625 +#, c-format +msgid " --sort-by-file sort output by file location\n" +msgstr " --sort-by-file 根據檔案位置排序\n" + +#: src/msginit.c:298 +msgid "" +"You are in a language indifferent environment. Please set\n" +"your LANG environment variable, as described in the ABOUT-NLS\n" +"file. This is necessary so you can test your translations.\n" +msgstr "" +"系統環境沒有任何和語言有關的設定。請根據 ABOUT-NLS 檔案所述,\n" +"設定 LANG 環境變數。這是測試翻譯時的必要步驟。\n" + +#: src/msginit.c:322 +#, c-format +msgid "" +"Output file %s already exists.\n" +"Please specify the locale through the --locale option or\n" +"the output .po file through the --output-file option.\n" +msgstr "" +"輸出檔 %s 已經存在。\n" +"請透過 --locale 選項指定語系或\n" +"--output-file 選項指定輸出的 .po 檔。\n" + +#: src/msginit.c:348 +#, c-format +msgid "Created %s.\n" +msgstr "已建立 %s。\n" + +#: src/msginit.c:368 +#, c-format, no-wrap +msgid "" +"Creates a new PO file, initializing the meta information with values from the\n" +"user's environment.\n" +msgstr "建立新的 PO 檔,並由使用者環境取得初始化所需的檔頭資料。\n" + +#: src/msginit.c:378 +#, c-format +msgid " -i, --input=INPUTFILE input POT file\n" +msgstr " -i, --input=輸入檔 輸入的 POT 檔\n" + +#: src/msginit.c:380 +#, c-format +msgid "" +"If no input file is given, the current directory is searched for the POT " +"file.\n" +"If it is -, standard input is read.\n" +msgstr "" +"如果沒有指定輸入檔,會在目前的目錄搜尋 POT 檔。\n" +"如果輸入檔是 -,則讀取標準輸入的內容。\n" + +#: src/msginit.c:386 +#, c-format +msgid " -o, --output-file=FILE write output to specified PO file\n" +msgstr " -o, --output-file=FILE 將輸出的內容寫入指定的 PO 檔\n" + +#: src/msginit.c:388 +#, c-format +msgid "" +"If no output file is given, it depends on the --locale option or the user's\n" +"locale setting. If it is -, the results are written to standard output.\n" +msgstr "" +"如果沒有指定輸出檔,檔名將會由 --locale 選項或使用者的語系決定。\n" +"如果輸出檔是 -,則會將結果寫至標準輸出。\n" + +#: src/msginit.c:401 +#, c-format +msgid " -l, --locale=LL_CC set target locale\n" +msgstr " -l, --locale=LL_CC 指定地區設定\n" + +#: src/msginit.c:403 +#, c-format +msgid "" +" --no-translator assume the PO file is automatically generated\n" +msgstr " --no-translator 假設 PO 檔是自動產生的\n" + +#: src/msginit.c:469 +msgid "" +"Found more than one .pot file.\n" +"Please specify the input .pot file through the --input option.\n" +msgstr "" +"找到多於一個的 .pot 檔。\n" +"請透過 --input 選項指定作為輸入檔的 .pot 檔。\n" + +#: src/msginit.c:477 src/msginit.c:482 +#, c-format +msgid "error reading current directory" +msgstr "讀取目前的目錄時發生錯誤" + +#: src/msginit.c:490 +msgid "" +"Found no .pot file in the current directory.\n" +"Please specify the input .pot file through the --input option.\n" +msgstr "" +"在目前目錄中找不到任何 .pot 檔。\n" +"請透過 --input 選項指定作為輸入檔的 .pot 檔。\n" + +#: src/msginit.c:919 src/msginit.c:994 src/msginit.c:1154 src/msginit.c:1249 +#: src/read-csharp.c:83 src/read-java.c:81 src/read-resources.c:84 +#: src/read-tcl.c:127 src/write-resources.c:104 +#, c-format +msgid "%s subprocess failed with exit code %d" +msgstr "%s 副行程失敗,錯誤碼為 %d" + +#: src/msginit.c:1119 +msgid "" +"The new message catalog should contain your email address, so that users " +"can\n" +"give you feedback about the translations, and so that maintainers can " +"contact\n" +"you in case of unexpected technical problems.\n" +msgstr "" +"新的翻譯檔應該含有您的電郵地址,這樣使用者就可以對您的翻譯提出意見,\n" +"同時軟件維護者也可以在出現技術問題時聯絡您。\n" + +#. TRANSLATORS: "English" needs to be replaced by your language. +#. For example in it.po write "Traduzioni italiani ...", +#. *not* "Traduzioni inglesi ...". +#: src/msginit.c:1535 +#, c-format +msgid "English translations for %s package" +msgstr "%s 套件的傳統字漢語翻譯" + +#: src/msgl-cat.c:177 src/msgl-charset.c:86 src/msgl-iconv.c:247 +#, c-format +msgid "present charset \"%s\" is not a portable encoding name" +msgstr "目前的字元集編碼 %s 不是通用的編碼名稱" + +#: src/msgl-cat.c:188 src/msgl-iconv.c:259 +#, c-format +msgid "two different charsets \"%s\" and \"%s\" in input file" +msgstr "輸入檔有兩種不同的字元集編碼 %s 和 “%s”" + +#: src/msgl-cat.c:203 +#, fuzzy, c-format +msgid "" +"input file '%s' doesn't contain a header entry with a charset specification" +msgstr "輸入檔‘%s’的標頭欄位中沒有指定字元集" + +#: src/msgl-cat.c:207 +#, fuzzy, c-format +msgid "" +"domain \"%s\" in input file '%s' doesn't contain a header entry with a " +"charset specification" +msgstr "輸入檔 ‘%2$s’ 的 domain “%1$s” 的標頭欄位中沒有指定字元集" + +#: src/msgl-cat.c:391 src/msgl-iconv.c:375 +#, c-format +msgid "target charset \"%s\" is not a portable encoding name." +msgstr "目標的字元集編碼 %s 不是通用的編碼名稱。" + +#: src/msgl-cat.c:442 src/msgl-cat.c:448 src/msgl-charset.c:92 +#: src/msgl-charset.c:127 src/po-xerror.c:122 src/po-xerror.c:147 +#: src/xgettext.c:544 src/xgettext.c:3426 +#, c-format +msgid "warning: " +msgstr "警告:" + +#: src/msgl-cat.c:443 +#, c-format +msgid "" +"Input files contain messages in different encodings, UTF-8 among others.\n" +"Converting the output to UTF-8.\n" +msgstr "" +"輸入檔含有不同編碼的訊息,其中一種是 UTF-8。會將輸出的編碼轉換為 UTF-8。\n" + +#: src/msgl-cat.c:449 +#, c-format +msgid "" +"Input files contain messages in different encodings, %s and %s among " +"others.\n" +"Converting the output to UTF-8.\n" +"To select a different output encoding, use the --to-code option.\n" +msgstr "" +"輸入檔含有不同編碼的訊息,其中包括 %s 和 %s。會將輸出的編碼轉換為 UTF-8。\n" +"若要選擇另一種輸出編碼,請使用 --to-code 選項。\n" + +#: src/msgl-cat.c:488 +#, c-format +msgid "" +"Conversion of file %s from %s encoding to %s encoding\n" +"changes some msgids or msgctxts.\n" +"Either change all msgids and msgctxts to be pure ASCII, or ensure they are\n" +"UTF-8 encoded from the beginning, i.e. already in your source code files.\n" +msgstr "" + +#: src/msgl-charset.c:93 +#, c-format +msgid "" +"Locale charset \"%s\" is different from\n" +"input file charset \"%s\".\n" +"Output of '%s' might be incorrect.\n" +"Possible workarounds are:\n" +msgstr "" +"目前語系的字元集“%s”和輸入檔的字元集“%s”不同。\n" +"‘%s’的輸出可能有誤。\n" +"可行的解決方法包括:\n" + +#: src/msgl-charset.c:100 +#, c-format +msgid "- Set LC_ALL to a locale with encoding %s.\n" +msgstr "- 設定 LC_ALL 環境變數為使用編碼 %s 的語系。\n" + +#: src/msgl-charset.c:105 +#, c-format +msgid "" +"- Convert the translation catalog to %s using 'msgconv',\n" +" then apply '%s',\n" +" then convert back to %s using 'msgconv'.\n" +msgstr "" +"- 用 ‘msgconv’ 將翻譯檔的字元集轉換為 %s,\n" +" 然後套用 ‘%s’ 指令過濾內容,\n" +" 最後再用 ‘msgconv’ 將翻譯檔的字元集還原為 %s。\n" + +#: src/msgl-charset.c:114 +#, c-format +msgid "" +"- Set LC_ALL to a locale with encoding %s,\n" +" convert the translation catalog to %s using 'msgconv',\n" +" then apply '%s',\n" +" then convert back to %s using 'msgconv'.\n" +msgstr "" +"- 設定 LC_ALL 環境變數為使用編碼 %s 的語系,\n" +" 用 ‘msgconv’ 將翻譯檔的字元集轉換為 %s,\n" +" 然後套用 ‘%s’ 指令過濾內容,\n" +" 最後再用 ‘msgconv’ 將翻譯檔的字元集還原為 %s。\n" + +#: src/msgl-charset.c:128 +#, c-format +msgid "" +"Locale charset \"%s\" is not a portable encoding name.\n" +"Output of '%s' might be incorrect.\n" +"A possible workaround is to set LC_ALL=C.\n" +msgstr "" +"語言的字元集編碼 %s 不是通用的編碼名稱。\n" +"‘%s’ 的輸出可能有誤。\n" +"設定 LC_ALL=C 是一個可行的解決方法。\n" + +#: src/msgl-check.c:130 +msgid "plural expression can produce negative values" +msgstr "複數表示式可能產生負數" + +#: src/msgl-check.c:141 +#, c-format +msgid "nplurals = %lu but plural expression can produce values as large as %lu" +msgstr "nplurals = %lu,但複數表示式的最大值可能等於 %lu" + +#: src/msgl-check.c:187 +msgid "plural expression can produce division by zero" +msgstr "複數表示式會引致被 0 整除的錯誤" + +#: src/msgl-check.c:192 +msgid "plural expression can produce integer overflow" +msgstr "複數表示式會引致整數溢位的錯誤" + +#: src/msgl-check.c:197 +msgid "" +"plural expression can produce arithmetic exceptions, possibly division by " +"zero" +msgstr "複數表示式會引致運算錯誤,例如被 0 整除" + +#: src/msgl-check.c:266 +#, fuzzy, c-format +msgid "Try using the following, valid for %s:" +msgstr "嘗試使用下列 %s 中屬於合法的型態:\n" + +#: src/msgl-check.c:358 src/msgl-check.c:382 +#, fuzzy +msgid "message catalog has plural form translations" +msgstr "翻譯檔含有複數型態的翻譯..." + +#: src/msgl-check.c:360 +#, fuzzy +msgid "but header entry lacks a \"plural=EXPRESSION\" attribute" +msgstr "...但檔頭缺少了像 “plural=表示式” 的項目" + +#: src/msgl-check.c:384 +#, fuzzy +msgid "but header entry lacks a \"nplurals=INTEGER\" attribute" +msgstr "...但檔頭缺少了像 “nplurals=整數” 的項目" + +#: src/msgl-check.c:420 +msgid "invalid nplurals value" +msgstr "無效的 nplurals 值" + +#: src/msgl-check.c:442 +msgid "invalid plural expression" +msgstr "無效的複數表示式" + +#: src/msgl-check.c:472 src/msgl-check.c:488 +#, fuzzy, c-format +msgid "nplurals = %lu" +msgstr "nplurals = %lu..." + +#: src/msgl-check.c:474 +#, fuzzy, c-format +msgid "but some messages have only one plural form" +msgid_plural "but some messages have only %lu plural forms" +msgstr[0] "...但某些訊息只有 %lu 種複數型態" + +#: src/msgl-check.c:490 +#, fuzzy, c-format +msgid "but some messages have one plural form" +msgid_plural "but some messages have %lu plural forms" +msgstr[0] "...但某些訊息有 %lu 種複數型態" + +#: src/msgl-check.c:514 +msgid "" +"message catalog has plural form translations, but lacks a header entry with " +"\"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\"" +msgstr "" +"翻譯檔含有複數型態的翻譯,但缺少了以下的標頭欄位:\n" +"“Plural-Forms: nplurals=<整數>; plural=<表示式>;”" + +#: src/msgl-check.c:611 +#, fuzzy +msgid "'msgid' and 'msgid_plural' entries do not both begin with '\\n'" +msgstr "`msgid' 和 `msgid_plural' 欄位並非同時以 '\\n' 開始" + +#: src/msgl-check.c:619 +#, fuzzy, c-format +msgid "'msgid' and 'msgstr[%u]' entries do not both begin with '\\n'" +msgstr "‘msgid’和‘msgstr[%u]’欄位並非同時以‘\\n’開始" + +#: src/msgl-check.c:634 +#, fuzzy +msgid "'msgid' and 'msgstr' entries do not both begin with '\\n'" +msgstr "‘msgid’和‘msgstr’欄位並非同時以‘\\n’開始" + +#: src/msgl-check.c:652 +#, fuzzy +msgid "'msgid' and 'msgid_plural' entries do not both end with '\\n'" +msgstr "‘msgid’和‘msgid_plural’欄位並非同時以‘\\n’結束" + +#: src/msgl-check.c:660 +#, fuzzy, c-format +msgid "'msgid' and 'msgstr[%u]' entries do not both end with '\\n'" +msgstr "‘msgid’和‘msgstr[%u]’欄位並非同時以‘\\n’結束" + +#: src/msgl-check.c:675 +#, fuzzy +msgid "'msgid' and 'msgstr' entries do not both end with '\\n'" +msgstr "‘msgid’和‘msgstr’欄位並非同時以‘\\n’結束" + +#: src/msgl-check.c:687 +msgid "plural handling is a GNU gettext extension" +msgstr "複數處理是 GNU gettext 的擴展功能" + +#: src/msgl-check.c:729 +#, c-format +msgid "msgstr lacks the keyboard accelerator mark '%c'" +msgstr "msgstr 缺少了捷徑鍵標記‘%c’" + +#: src/msgl-check.c:740 +#, c-format +msgid "msgstr has too many keyboard accelerator marks '%c'" +msgstr "msgstr 含有過多的捷徑鍵標記‘%c’" + +#: src/msgl-check.c:814 +#, fuzzy, c-format +msgid "header field '%s' still has the initial default value\n" +msgstr "某些標頭欄位仍然是預設值\n" + +#: src/msgl-check.c:831 +#, fuzzy, c-format +msgid "header field '%s' missing in header\n" +msgstr "缺少了標頭欄位‘%s’\n" + +#: src/msgl-iconv.c:65 +#, c-format +msgid "%s: input is not valid in \"%s\" encoding" +msgstr "" + +# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, c-format +#: src/msgl-iconv.c:69 +#, fuzzy, c-format +msgid "%s: error while converting from \"%s\" encoding to \"%s\" encoding" +msgstr "當開啟檔案 %s 準備讀取時發生錯誤" + +#: src/msgl-iconv.c:290 +msgid "input file doesn't contain a header entry with a charset specification" +msgstr "輸入檔沒有指定字元集的標頭欄位" + +#: src/msgl-iconv.c:305 src/recode-sr-latin.c:288 src/recode-sr-latin.c:293 +#: src/x-python.c:665 src/xgettext.c:720 +#, c-format +msgid "" +"Cannot convert from \"%s\" to \"%s\". %s relies on iconv(), and iconv() does " +"not support this conversion." +msgstr "" +"不支援將字元集由 %s 轉換至 “%s”。%s 需要 iconv(),但 iconv() 不支援此種轉換方" +"式。" + +#: src/msgl-iconv.c:335 +#, c-format +msgid "" +"Conversion from \"%s\" to \"%s\" introduces duplicates: some different " +"msgids become equal." +msgstr "" +"由 %s 轉換至 %s 會產生重複訊息:有些本來不同的 msgid 轉換後會變成相同。" + +#: src/msgl-iconv.c:341 src/recode-sr-latin.c:302 src/x-python.c:672 +#: src/xgettext.c:727 +#, c-format +msgid "" +"Cannot convert from \"%s\" to \"%s\". %s relies on iconv(). This version was " +"built without iconv()." +msgstr "" +"不支援將字元集由 %s 轉換至 “%s”。%s 需要 iconv(),但編譯此程式時沒有 iconv() " +"支援。" + +#: src/msgmerge.c:405 src/msgmerge.c:411 +#, c-format +msgid "%s is only valid with %s" +msgstr "%s 只能和 %s 配合一起使用才有效" + +#: src/msgmerge.c:466 +msgid "backup type" +msgstr "備份方式" + +#: src/msgmerge.c:503 +#, c-format, no-wrap +msgid "" +"Merges two Uniforum style .po files together. The def.po file is an\n" +"existing PO file with translations which will be taken over to the newly\n" +"created file as long as they still match; comments will be preserved,\n" +"but extracted comments and file positions will be discarded. The ref.pot\n" +"file is the last created PO file with up-to-date source references but\n" +"old translations, or a PO Template file (generally created by xgettext);\n" +"any translations or comments in the file will be discarded, however dot\n" +"comments and file positions will be preserved. Where an exact match\n" +"cannot be found, fuzzy matching is used to produce better results.\n" +msgstr "" +"合併兩個 Uniforum 格式的 .po 檔。def.po 是舊的 PO 檔,裡面的翻譯訊息只要\n" +"和新產生的檔案條目符合,都會被合併進去;合併時會保留自行加上的註解,不過\n" +"會捨棄原程式碼的註解和檔案位置。ref.pot 可以是有最新來源條目但只含有舊翻譯\n" +"的 PO 檔,或是一個 POT 檔 (通常由 xgettext 產生);任何翻譯後的訊息或檔案裡\n" +"的註解都會被捨棄,但特殊旗標註解和檔案位置都會被保留。比較時如果有不完全\n" +"配合的字串出現,程式會以模糊配對的方式得出較好的結果。\n" + +#: src/msgmerge.c:520 +#, c-format +msgid " def.po translations referring to old sources\n" +msgstr " def.po 舊版本的翻譯檔\n" + +#: src/msgmerge.c:522 +#, c-format +msgid " ref.pot references to new sources\n" +msgstr " ref.pot 新版本程式的翻譯檔\n" + +#: src/msgmerge.c:526 +#, c-format +msgid "" +" -C, --compendium=FILE additional library of message translations,\n" +" may be specified more than once\n" +msgstr " -C, --compendium=FILE 額外的翻譯記憶庫,選項可以使用多次\n" + +#: src/msgmerge.c:532 +#, c-format +msgid "" +" -U, --update update def.po,\n" +" do nothing if def.po already up to date\n" +msgstr " -U, --update 更新 def.po (僅當 def.po 未更新時)\n" + +#: src/msgmerge.c:544 +#, c-format +msgid "Output file location in update mode:\n" +msgstr "更新模式的檔案輸出位置:\n" + +#: src/msgmerge.c:546 +#, c-format +msgid "The result is written back to def.po.\n" +msgstr "輸出結果會寫入至 def.po。\n" + +#: src/msgmerge.c:548 +#, c-format +msgid " --backup=CONTROL make a backup of def.po\n" +msgstr " --backup=CONTROL 將 def.po 備份\n" + +#: src/msgmerge.c:550 +#, c-format +msgid " --suffix=SUFFIX override the usual backup suffix\n" +msgstr " --suffix=SUFFIX 自行指定備份檔名末端的字串\n" + +#: src/msgmerge.c:552 +#, c-format +msgid "" +"The version control method may be selected via the --backup option or " +"through\n" +"the VERSION_CONTROL environment variable. Here are the values:\n" +" none, off never make backups (even if --backup is given)\n" +" numbered, t make numbered backups\n" +" existing, nil numbered if numbered backups exist, simple otherwise\n" +" simple, never always make simple backups\n" +msgstr "" +"版本控制的方式可透過 --backup 選項或 VERSION_CONTROL 環境變數來選擇。\n" +"以下是可用的變數值:\n" +" none, off 即使使用了 --backup 選項仍不會備份\n" +" numbered, t 備份檔名加上數字\n" +" existing, nil 若有數字的備份檔已經存在則使用數字,否則使用一般名稱\n" +" simple, never 永遠使用普通方式備份\n" + +#: src/msgmerge.c:559 +#, fuzzy, c-format +msgid "" +"The backup suffix is '~', unless set with --suffix or the " +"SIMPLE_BACKUP_SUFFIX\n" +"environment variable.\n" +msgstr "" +"備份檔的後置字元為‘~’,除非以 --suffix 選項或是 SIMPLE_BACKUP_SUFFIX\n" +"環境變數指定。\n" + +#: src/msgmerge.c:570 +#, fuzzy, c-format +msgid "" +" --previous keep previous msgids of translated messages\n" +msgstr " --translated 只保留已翻譯條目,刪除未翻譯條目\n" + +#: src/msgmerge.c:627 src/urlget.c:192 +#, c-format +msgid " -q, --quiet, --silent suppress progress indicators\n" +msgstr " -q, --quiet, --silent 隱藏進度指示\n" + +#: src/msgmerge.c:1622 +#, c-format +msgid "this message should define plural forms" +msgstr "此訊息應該有複數型態" + +#: src/msgmerge.c:1645 +#, c-format +msgid "this message should not define plural forms" +msgstr "此訊息不應有複數型態" + +#: src/msgmerge.c:2048 +#, c-format +msgid "" +"%sRead %ld old + %ld reference, merged %ld, fuzzied %ld, missing %ld, " +"obsolete %ld.\n" +msgstr "" +"%s\n" +"讀入 %ld 舊翻譯 + %ld 參考條目。合併:%ld,模糊:%ld,未譯:%ld,過時:" +"%ld。\n" + +#: src/msgmerge.c:2056 src/urlget.c:306 src/urlget.c:353 src/urlget.c:395 +#: src/urlget.c:437 +#, c-format +msgid " done.\n" +msgstr " 完成。\n" + +#: src/msgunfmt.c:308 src/msgunfmt.c:317 src/msgunfmt.c:340 +#, c-format +msgid "%s and explicit file names are mutually exclusive" +msgstr "使用 %s 不能同時指定檔案名稱" + +#: src/msgunfmt.c:427 +#, c-format +msgid "Usage: %s [OPTION] [FILE]...\n" +msgstr "用法:%s [選項] [檔案]...\n" + +#: src/msgunfmt.c:431 +#, c-format +msgid "Convert binary message catalog to Uniforum style .po file.\n" +msgstr "將二元碼翻譯檔轉換為 Uniforum 型式的 .po 檔。\n" + +#: src/msgunfmt.c:440 +#, c-format +msgid "" +" -j, --java Java mode: input is a Java ResourceBundle " +"class\n" +msgstr "" +" -j, --java Java 模式:產生 Java ResourceBundle class\n" + +#: src/msgunfmt.c:442 +#, c-format +msgid " --csharp C# mode: input is a .NET .dll file\n" +msgstr " --csharp C# 模式:輸入檔是 .NET .dll 檔\n" + +#: src/msgunfmt.c:444 +#, c-format +msgid "" +" --csharp-resources C# resources mode: input is a .NET .resources " +"file\n" +msgstr "" +" --csharp-resources C# resources 模式:輸入內容是 .NET .resources " +"檔案\n" + +#: src/msgunfmt.c:446 +#, c-format +msgid "" +" --tcl Tcl mode: input is a tcl/msgcat .msg file\n" +msgstr "" +" --tcl Tcl 模式:輸入資料是 tcl/msgcat .msg 檔\n" + +#: src/msgunfmt.c:451 +#, c-format +msgid " FILE ... input .mo files\n" +msgstr " 檔案 ... 作為輸入的 .mo 檔\n" + +#: src/msgunfmt.c:456 +#, c-format +msgid "Input file location in Java mode:\n" +msgstr "Java 模式的輸入檔位置:\n" + +#: src/msgunfmt.c:462 +#, c-format +msgid "" +"The class name is determined by appending the locale name to the resource " +"name,\n" +"separated with an underscore. The class is located using the CLASSPATH.\n" +msgstr "" +"class 名稱是由語言名稱和 resource 名稱合併來決定的,兩者之間會用底線分隔。\n" +"class 檔會在 CLASSPATH 變數所指定的目錄中搜尋。\n" + +#: src/msgunfmt.c:467 +#, c-format +msgid "Input file location in C# mode:\n" +msgstr "C# 模式的輸入檔位置:\n" + +#: src/msgunfmt.c:475 +#, c-format +msgid "" +"The -l and -d options are mandatory. The .dll file is located in a\n" +"subdirectory of the specified directory whose name depends on the locale.\n" +msgstr "" + +#: src/msgunfmt.c:479 +#, c-format +msgid "Input file location in Tcl mode:\n" +msgstr "Tcl 模式的輸入檔位置:\n" + +#: src/msgunfmt.c:485 +#, c-format +msgid "" +"The -l and -d options are mandatory. The .msg file is located in the\n" +"specified directory.\n" +msgstr "" + +#: src/msgunfmt.c:511 +#, c-format +msgid " -i, --indent write indented output style\n" +msgstr " -i, --indent 將輸出結果進行縮排\n" + +#: src/msgunfmt.c:513 +#, c-format +msgid " --strict write strict uniforum style\n" +msgstr " --strict 輸出結果嚴格遵從 Uniforum 格式\n" + +#: src/msguniq.c:331 +#, c-format, no-wrap +msgid "" +"Unifies duplicate translations in a translation catalog.\n" +"Finds duplicate translations of the same message ID. Such duplicates are\n" +"invalid input for other programs like msgfmt, msgmerge or msgcat. By\n" +"default, duplicates are merged together. When using the --repeated option,\n" +"only duplicates are output, and all other messages are discarded. Comments\n" +"and extracted comments will be cumulated, except that if --use-first is\n" +"specified, they will be taken from the first translation. File positions\n" +"will be cumulated. When using the --unique option, duplicates are discarded.\n" +msgstr "" +"統一翻譯檔裡重複出現的條目。\n" +"它會搜尋重複的條目,這些條目會令 msgfmt、msgmerge 或 msgcat 等的程式無法\n" +"正常處理翻譯條目。在預設模式中,重複的條目會合併在一起。使用 --repeated \n" +"選項時,只會顯示重複的條目而捨棄其它條目。\n" +"自行加上的註解和原程式碼的註解都會累積;除非使用 --use-first 選項,那樣\n" +"則會由第一個翻譯條目中讀取這些資料。檔案位置是會累積下來的。\n" +"當使用 --unique 選項時,則會捨棄任何重複的翻譯條目。\n" + +#: src/msguniq.c:364 +#, c-format +msgid " -d, --repeated print only duplicates\n" +msgstr " -d, --repeated 只顯示重複條目\n" + +#: src/msguniq.c:366 +#, c-format +msgid "" +" -u, --unique print only unique messages, discard " +"duplicates\n" +msgstr "" +" -u, --unique 只顯示出現一次的條目,捨棄任何重複的條目\n" + +#: src/open-catalog.c:56 libgettextpo/gettext-po.c:102 +#: libgettextpo/gettext-po.c:150 libgettextpo/gettext-po.c:198 +msgid "<stdin>" +msgstr "<標準輸入>" + +#: src/po-charset.c:489 +#, c-format +msgid "" +"Charset \"%s\" is not a portable encoding name.\n" +"Message conversion to user's charset might not work.\n" +msgstr "" +"字元集“%s”不是通用的編碼名稱。\n" +"轉換訊息至使用者字元集的功能將不會運作。\n" + +#: src/po-charset.c:557 +#, c-format +msgid "" +"Charset \"%s\" is not supported. %s relies on iconv(),\n" +"and iconv() does not support \"%s\".\n" +msgstr "" +"不支援字元集 “%s”。%s 需要 iconv(),\n" +"但 iconv() 不支援 “%s”。\n" + +#: src/po-charset.c:564 src/po-charset.c:612 +msgid "" +"Installing GNU libiconv and then reinstalling GNU gettext\n" +"would fix this problem.\n" +msgstr "先安裝 GNU libiconv,然後再安裝 GNU gettext,將會修正此問題。\n" + +#: src/po-charset.c:578 src/po-charset.c:616 +msgid "Continuing anyway, expect parse errors." +msgstr "仍會繼續執行,但預計解析內容時會出現錯誤。" + +#: src/po-charset.c:580 +msgid "Continuing anyway." +msgstr "仍會繼續執行。" + +#: src/po-charset.c:607 +#, c-format +msgid "" +"Charset \"%s\" is not supported. %s relies on iconv().\n" +"This version was built without iconv().\n" +msgstr "" +"不支援字元集 “%s”。%s 需要 iconv(),\n" +"但編譯此程式時沒有 iconv() 支援。\n" + +#: src/po-charset.c:644 +msgid "" +"Charset missing in header.\n" +"Message conversion to user's charset will not work.\n" +msgstr "" +"檔頭缺少了指定字元集的欄位。\n" +"轉換訊息至使用者字元集的功能將不會生效。\n" + +#: src/po-gram-gen.y:93 +#, c-format +msgid "inconsistent use of #~" +msgstr "不一致地使用 #~" + +#: src/po-gram-gen.y:243 +#, fuzzy, c-format +msgid "missing 'msgstr[]' section" +msgstr "缺少了 ‘msgstr[]’ 段落" + +#: src/po-gram-gen.y:252 +#, fuzzy, c-format +msgid "missing 'msgid_plural' section" +msgstr "缺少了 ‘msgid_plural’ 段落" + +#: src/po-gram-gen.y:260 +#, fuzzy, c-format +msgid "missing 'msgstr' section" +msgstr "缺少了 ‘msgstr’ 段落" + +#: src/po-gram-gen.y:399 +#, c-format +msgid "first plural form has nonzero index" +msgstr "第一個複數格式的索引數字不是 0" + +#: src/po-gram-gen.y:401 +#, c-format +msgid "plural form has wrong index" +msgstr "複數格式含有錯誤的索引數字" + +#: src/po-lex.c:90 src/po-lex.c:109 +#, c-format +msgid "too many errors, aborting" +msgstr "錯誤太多,必須中斷作業" + +#: src/po-lex.c:437 src/po-lex.c:507 src/write-po.c:812 src/write-po.c:950 +#, c-format +msgid "invalid multibyte sequence" +msgstr "無效的位元組序列" + +#: src/po-lex.c:465 +#, c-format +msgid "incomplete multibyte sequence at end of file" +msgstr "檔案末端出現不完整的位元組序列" + +#: src/po-lex.c:475 +#, c-format +msgid "incomplete multibyte sequence at end of line" +msgstr "行末出現不完整的位元組序列" + +#: src/po-lex.c:487 +msgid "iconv failure" +msgstr "iconv 失敗" + +#: src/po-lex.c:744 +#, c-format +msgid "keyword \"%s\" unknown" +msgstr "不明的關鍵字“%s”" + +#: src/po-lex.c:854 +#, c-format +msgid "invalid control sequence" +msgstr "無效的控制序列" + +#: src/po-lex.c:981 +#, c-format +msgid "end-of-file within string" +msgstr "檔案在字串中段突然結束" + +#: src/po-lex.c:987 +#, c-format +msgid "end-of-line within string" +msgstr "字串中間突然斷行" + +#: src/po-lex.c:1008 +#, c-format +msgid "context separator <EOT> within string" +msgstr "" + +#: src/read-catalog.c:318 src/xgettext.c:1046 +#, c-format +msgid "this file may not contain domain directives" +msgstr "此檔案不能含有 domain 指令" + +#: src/read-catalog.c:363 +msgid "duplicate message definition" +msgstr "訊息被重複定義" + +#: src/read-catalog.c:365 +#, fuzzy +msgid "this is the location of the first definition" +msgstr "...這是第一次定義的位置" + +#: src/read-mo.c:107 src/read-mo.c:129 src/read-mo.c:177 src/read-mo.c:205 +#, c-format +msgid "file \"%s\" is truncated" +msgstr "檔案 %s 被截斷了" + +#: src/read-mo.c:132 +#, c-format +msgid "file \"%s\" contains a not NUL terminated string" +msgstr "檔案 %s 包含並非以 NUL 為結尾的字串" + +#: src/read-mo.c:169 src/read-mo.c:280 +#, c-format +msgid "file \"%s\" is not in GNU .mo format" +msgstr "檔案 %s 並非 GNU .mo 格式檔案" + +#: src/read-mo.c:183 +#, c-format +msgid "file \"%s\" contains a not NUL terminated string, at %s" +msgstr "檔案 %s 在 %s 包含並非以 NUL 為結尾的字串" + +#: src/read-properties.c:227 +#, fuzzy +msgid "warning: invalid \\uxxxx syntax for Unicode character" +msgstr "%s:%lu: 錯誤:Unicode 字元格式 \\uxxxx 無效" + +#: src/read-stringtable.c:802 +#, fuzzy +msgid "warning: unterminated string" +msgstr "%s:%d: 警告:字串未完結" + +#: src/read-stringtable.c:810 +#, fuzzy +msgid "warning: syntax error" +msgstr "%s:%lu: 警告:格式錯誤" + +#: src/read-stringtable.c:871 src/read-stringtable.c:893 +#, fuzzy +msgid "warning: unterminated key/value pair" +msgstr "%s:%d: 警告:正規表示式不完整" + +#: src/read-stringtable.c:939 +#, fuzzy +msgid "warning: syntax error, expected ';' after string" +msgstr "%s:%lu: 警告:格式錯誤,字串後應出現‘;’" + +#: src/read-stringtable.c:948 +#, fuzzy +msgid "warning: syntax error, expected '=' or ';' after string" +msgstr "%s:%lu: 警告:格式錯誤,字串後應該出現 ‘=’ 或 ‘;’" + +#: src/recode-sr-latin.c:116 +#, fuzzy, c-format +msgid "Written by %s and %s.\n" +msgstr "由 %s 編寫。\n" + +#. TRANSLATORS: This is a proper name. The last name is +#. (with Unicode escapes) "\u0160egan" or (with HTML entities) +#. "Šegan". +#. This is a proper name. See the gettext manual, section Names. +#: src/recode-sr-latin.c:120 +msgid "Danilo Segan" +msgstr "" + +#: src/recode-sr-latin.c:153 +#, c-format, no-wrap +msgid "Recode Serbian text from Cyrillic to Latin script.\n" +msgstr "" + +#: src/recode-sr-latin.c:156 +#, c-format, no-wrap +msgid "" +"The input text is read from standard input. The converted text is output to\n" +"standard output.\n" +msgstr "" + +#: src/recode-sr-latin.c:339 +#, c-format +msgid "input is not valid in \"%s\" encoding" +msgstr "" + +# lib/copy-file.c:61 src/file-list.c:57 src/po-lex.c:726 src/read-mo.c:171 src/urlget.c:204 src/xgettext.c:823 src/xgettext.c:836 src/xgettext.c:846 #, c-format +#: src/recode-sr-latin.c:367 +#, fuzzy, c-format +msgid "error while converting from \"%s\" encoding to \"%s\" encoding" +msgstr "當開啟檔案 %s 準備讀取時發生錯誤" + +#: src/urlget.c:159 +#, c-format +msgid "expected two arguments" +msgstr "需要恰好兩個引數" + +#: src/urlget.c:176 +#, c-format +msgid "Usage: %s [OPTION] URL FILE\n" +msgstr "用法:%s [選項] 網址 檔案\n" + +#: src/urlget.c:181 +#, c-format, no-wrap +msgid "" +"Fetches and outputs the contents of an URL. If the URL cannot be accessed,\n" +"the locally accessible FILE is used instead.\n" +msgstr "擷取並輸出某網址的內容。如果無法存取該網址,則改用指定的本機檔案代替。\n" + +#: src/urlget.c:228 +#, c-format +msgid "error reading \"%s\"" +msgstr "讀取 %s 時發生錯誤" + +#: src/urlget.c:234 +#, c-format +msgid "error writing stdout" +msgstr "寫入至標準輸出時發生錯誤" + +#: src/urlget.c:238 +#, c-format +msgid "error after reading \"%s\"" +msgstr "完成讀取 %s 後發生錯誤" + +#: src/urlget.c:264 +#, c-format +msgid "Retrieving %s..." +msgstr "" + +#: src/urlget.c:308 +#, c-format +msgid " timed out.\n" +msgstr "" + +#: src/urlget.c:445 +#, c-format +msgid " failed.\n" +msgstr "" + +#: src/write-catalog.c:126 +#, fuzzy +msgid "" +"Cannot output multiple translation domains into a single file with the " +"specified output format. Try using PO file syntax instead." +msgstr "" +"不可以將多個屬於不同 domain 的翻譯訊息寫入一個 Java .properties 檔案。請改用" +"PO 檔案格式。" + +#: src/write-catalog.c:129 +#, fuzzy +msgid "" +"Cannot output multiple translation domains into a single file with the " +"specified output format." +msgstr "" +"不可以將多個屬於不同領域的翻譯訊息寫入一個 NeXTstep/GNUstep .strings 檔案。" + +#: src/write-catalog.c:162 +#, fuzzy +msgid "" +"message catalog has context dependent translations, but the output format " +"does not support them." +msgstr "翻譯檔含有複數型態的翻譯,但輸出檔的格式不支援複數型態。" + +#: src/write-catalog.c:197 +msgid "" +"message catalog has plural form translations, but the output format does not " +"support them. Try generating a Java class using \"msgfmt --java\", instead " +"of a properties file." +msgstr "" +"翻譯檔中有複數格式的翻譯字句,但輸出格式不支援複數。請嘗試使用 “msgfmt --" +"java” 產生 Java class,而不用 properties 檔案。" + +#: src/write-catalog.c:202 +msgid "" +"message catalog has plural form translations, but the output format does not " +"support them." +msgstr "翻譯檔含有複數型態的翻譯,但輸出檔的格式不支援複數型態。" + +#: src/write-catalog.c:231 src/write-catalog.c:275 +#, c-format +msgid "cannot create output file \"%s\"" +msgstr "無法產生輸出檔 “%s”" + +#: src/write-catalog.c:239 src/write-catalog.c:283 +msgid "standard output" +msgstr "標準輸出" + +#: src/write-csharp.c:703 +#, c-format +msgid "failed to create directory \"%s\"" +msgstr "無法建立 %s 目錄" + +#: src/write-csharp.c:766 +#, c-format +msgid "compilation of C# class failed, please try --verbose" +msgstr "編譯 C# class 檔出現錯誤,請嘗試使用 --verbose 選項" + +#: src/write-csharp.c:768 +#, fuzzy, c-format +msgid "compilation of C# class failed" +msgstr "編譯 C# class 檔出現錯誤,請嘗試使用 --verbose 選項" + +#: src/write-java.c:1091 +#, c-format +msgid "not a valid Java class name: %s" +msgstr "並非有效的 Java class 名稱:%s" + +#: src/write-java.c:1210 +#, c-format +msgid "compilation of Java class failed, please try --verbose or set $JAVAC" +msgstr "" +"編譯 Java class 檔出現錯誤,請嘗試使用 --verbose 選項或設定 $JAVAC 環境變數" + +#: src/write-java.c:1213 +#, fuzzy, c-format +msgid "compilation of Java class failed, please try to set $JAVAC" +msgstr "" +"編譯 Java class 檔出現錯誤,請嘗試使用 --verbose 選項或設定 $JAVAC 環境變數" + +#: src/write-mo.c:799 src/write-qt.c:736 src/write-tcl.c:212 +#, c-format +msgid "error while opening \"%s\" for writing" +msgstr "當開啟檔案 %s 來寫入內容時發生錯誤" + +#: src/write-po.c:821 +#, fuzzy +msgid "incomplete multibyte sequence" +msgstr "無效的位元組序列" + +#: src/write-po.c:884 +#, fuzzy, c-format +msgid "" +"internationalized messages should not contain the '\\%c' escape sequence" +msgstr "國際化的訊息不應含有 ‘\\%c’ 這個轉義控制序列 (escape sequence)" + +#: src/write-po.c:1335 src/write-po.c:1459 +#, fuzzy, c-format +msgid "" +"The following msgctxt contains non-ASCII characters.\n" +"This will cause problems to translators who use a character encoding\n" +"different from yours. Consider using a pure ASCII msgctxt instead.\n" +"%s\n" +msgstr "" +"下列的 msgid 含有不屬於 ASCII 的字元。\n" +"這樣會對任何使用其它編碼 (和您用的字元集編碼不同) 的翻譯者構成問題。\n" +"請考慮使用只有 ASCII 字元的 msgid。\n" +"%s\n" + +#: src/write-po.c:1347 src/write-po.c:1471 +#, c-format +msgid "" +"The following msgid contains non-ASCII characters.\n" +"This will cause problems to translators who use a character encoding\n" +"different from yours. Consider using a pure ASCII msgid instead.\n" +"%s\n" +msgstr "" +"下列的 msgid 含有不屬於 ASCII 的字元。\n" +"這樣會對任何使用其它編碼 (和您用的字元集編碼不同) 的翻譯者構成問題。\n" +"請考慮使用只有 ASCII 字元的 msgid。\n" +"%s\n" + +#: src/write-qt.c:667 +msgid "" +"message catalog has plural form translations\n" +"but the Qt message catalog format doesn't support plural handling\n" +msgstr "翻譯檔含有複數型態的翻譯,但 Qt 的翻譯檔不能處理複數型態\n" + +#: src/write-qt.c:693 +#, fuzzy +msgid "" +"message catalog has msgctxt strings containing characters outside " +"ISO-8859-1\n" +"but the Qt message catalog format supports Unicode only in the translated\n" +"strings, not in the context strings\n" +msgstr "" +"翻譯檔中某些 msgid 含有 ISO-8859-1 以外的字元,但 Qt 翻譯檔格式只支援翻譯後的" +"字句使用 Unicode,未翻譯的字句是不支援的。\n" + +#: src/write-qt.c:717 +msgid "" +"message catalog has msgid strings containing characters outside ISO-8859-1\n" +"but the Qt message catalog format supports Unicode only in the translated\n" +"strings, not in the untranslated strings\n" +msgstr "" +"翻譯檔中某些 msgid 含有 ISO-8859-1 以外的字元,但 Qt 翻譯檔格式只支援翻譯後的" +"字句使用 Unicode,未翻譯的字句是不支援的。\n" + +#: src/write-resources.c:94 +#, c-format +msgid "error while writing to %s subprocess" +msgstr "將內容寫入至 %s 副行程時發生錯誤" + +#: src/write-resources.c:131 +#, fuzzy +msgid "" +"message catalog has context dependent translations\n" +"but the C# .resources format doesn't support contexts\n" +msgstr "翻譯檔含有複數型態的翻譯,但 C# 的翻譯檔不能處理複數型態\n" + +#: src/write-resources.c:150 +msgid "" +"message catalog has plural form translations\n" +"but the C# .resources format doesn't support plural handling\n" +msgstr "翻譯檔含有複數型態的翻譯,但 C# 的翻譯檔不能處理複數型態\n" + +#: src/write-tcl.c:157 +#, fuzzy +msgid "" +"message catalog has context dependent translations\n" +"but the Tcl message catalog format doesn't support contexts\n" +msgstr "翻譯檔含有複數型態的翻譯,但 Tcl 的翻譯檔不能處理複數型態\n" + +#: src/write-tcl.c:176 +msgid "" +"message catalog has plural form translations\n" +"but the Tcl message catalog format doesn't support plural handling\n" +msgstr "翻譯檔含有複數型態的翻譯,但 Tcl 的翻譯檔不能處理複數型態\n" + +#: src/x-awk.c:341 src/x-javascript.c:795 src/x-python.c:931 +#, c-format +msgid "%s:%d: warning: unterminated string" +msgstr "%s:%d: 警告:字串未完結" + +#: src/x-awk.c:592 +#, c-format +msgid "%s:%d: warning: unterminated regular expression" +msgstr "%s:%d: 警告:正規表示式不完整" + +#: src/x-c.c:1052 +#, fuzzy, c-format +msgid "warning: invalid Unicode character" +msgstr "%s:%d: 警告:Unicode 字元無效" + +#: src/x-c.c:1344 src/x-csharp.c:1509 src/x-java.c:872 src/x-vala.c:619 +#, c-format +msgid "%s:%d: warning: unterminated character constant" +msgstr "%s:%d: 警告:字元常數未完結" + +#: src/x-c.c:1390 src/x-c.c:1430 src/x-vala.c:729 +#, c-format +msgid "%s:%d: warning: unterminated string literal" +msgstr "%s:%d: 警告:字串未完結" + +#: src/x-csharp.c:224 src/xgettext.c:2106 +#, fuzzy +msgid "Please specify the source encoding through --from-code." +msgstr "" +"%s%s 出現不屬於 ASCII 字元的字串。\n" +"請使用 --from-code 選項指定源代碼的文字編碼。\n" + +#: src/x-csharp.c:269 +#, c-format +msgid "" +"%s:%d: Invalid multibyte sequence.\n" +"Please specify the correct source encoding through --from-code.\n" +msgstr "" +"%s:%d: 出現無效的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-csharp.c:285 +#, c-format +msgid "" +"%s:%d: Long incomplete multibyte sequence.\n" +"Please specify the correct source encoding through --from-code.\n" +msgstr "" +"%s:%d: 出現無效而且十分長的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-csharp.c:297 +#, c-format +msgid "" +"%s:%d: Incomplete multibyte sequence at end of file.\n" +"Please specify the correct source encoding through --from-code.\n" +msgstr "" +"%s:%d: 檔案末端出現不完整的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-csharp.c:306 +#, c-format +msgid "" +"%s:%d: Incomplete multibyte sequence at end of line.\n" +"Please specify the correct source encoding through --from-code.\n" +msgstr "" +"%s:%d: 該行末端出現不完整的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-csharp.c:315 src/x-javascript.c:321 src/x-python.c:374 +#, c-format +msgid "%s:%d: iconv failure" +msgstr "%s:%d: iconv 失敗" + +#: src/x-csharp.c:338 +#, c-format +msgid "" +"%s:%d: Invalid multibyte sequence.\n" +"Please specify the source encoding through --from-code.\n" +msgstr "" +"%s:%d: 出現無效的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-csharp.c:1390 src/x-python.c:1138 +#, c-format +msgid "%s:%d: warning: invalid Unicode character" +msgstr "%s:%d: 警告:Unicode 字元無效" + +#: src/x-csharp.c:1512 src/x-java.c:875 +#, c-format +msgid "%s:%d: warning: unterminated string constant" +msgstr "%s:%d: 警告:字元常數未完結" + +#: src/x-csharp.c:2018 src/x-java.c:1369 +#, c-format +msgid "%s:%d: warning: ')' found where '}' was expected" +msgstr "%s:%d: 應該有 ‘)’ 的地方出現了 ‘}’" + +#: src/x-csharp.c:2052 src/x-java.c:1403 +#, c-format +msgid "%s:%d: warning: '}' found where ')' was expected" +msgstr "%s:%d: 應該有 ‘}’ 的地方出現了 ‘)’" + +#: src/x-glade.c:295 +#, c-format +msgid "Missing context for the string extracted from '%s' element" +msgstr "" + +#: src/x-glade.c:417 +#, c-format +msgid "The root element <%s> is not allowed in a valid Glade file" +msgstr "" + +#: src/x-glade.c:572 src/x-glade.c:579 +#, fuzzy, c-format +msgid "%s:%lu:%lu: %s" +msgstr "%s:%d:%d: %s" + +#: src/x-glade.c:606 +#, c-format +msgid "" +"Language \"glade\" is not supported. %s relies on expat.\n" +"This version was built without expat.\n" +msgstr "" +"不支援 “glade” 語言。%s 是需要 expat 軟體的,\n" +"但這個版本編譯時沒有加入 expat 支援。\n" + +#: src/x-java.c:494 +#, fuzzy, c-format +msgid "%s:%d: warning: lone surrogate U+%04X" +msgstr "%s:%d: 警告:字串未完結" + +#: src/x-javascript.c:230 +#, fuzzy +msgid "Please specify the source encoding through --from-code\n" +msgstr "" +"%s%s 出現不屬於 ASCII 字元的字串。\n" +"請使用 --from-code 選項指定源代碼的文字編碼。\n" + +#: src/x-javascript.c:275 +#, fuzzy, c-format +msgid "" +"%s:%d: Invalid multibyte sequence.\n" +"Please specify the correct source encoding through --from-code\n" +msgstr "" +"%s:%d: 出現無效的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-javascript.c:291 +#, fuzzy, c-format +msgid "" +"%s:%d: Long incomplete multibyte sequence.\n" +"Please specify the correct source encoding through --from-code\n" +msgstr "" +"%s:%d: 出現無效而且十分長的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-javascript.c:303 +#, fuzzy, c-format +msgid "" +"%s:%d: Incomplete multibyte sequence at end of file.\n" +"Please specify the correct source encoding through --from-code\n" +msgstr "" +"%s:%d: 檔案末端出現不完整的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-javascript.c:312 +#, fuzzy, c-format +msgid "" +"%s:%d: Incomplete multibyte sequence at end of line.\n" +"Please specify the correct source encoding through --from-code\n" +msgstr "" +"%s:%d: 該行末端出現不完整的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-javascript.c:344 +#, fuzzy, c-format +msgid "" +"%s:%d: Invalid multibyte sequence.\n" +"Please specify the source encoding through --from-code\n" +msgstr "" +"%s:%d: 出現無效的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-javascript.c:954 +#, fuzzy, c-format +msgid "%s:%d: warning: RegExp literal terminated too early" +msgstr "%s:%d: 警告:字串未完結" + +#: src/x-javascript.c:1055 +#, fuzzy, c-format +msgid "%s:%d: warning: %s is not allowed" +msgstr "%s:%d: 警告:Unicode 字元無效" + +#: src/x-javascript.c:1069 +#, fuzzy, c-format +msgid "%s:%d: warning: unterminated XML markup" +msgstr "%s:%d: 警告:字串未完結" + +#: src/x-perl.c:308 +#, c-format +msgid "%s:%d: can't find string terminator \"%s\" anywhere before EOF" +msgstr "%s:%d: EOF 之前找不到任何表示字串完結的標記 “%s”" + +#: src/x-perl.c:1043 +#, c-format +msgid "%s:%d: missing right brace on \\x{HEXNUMBER}" +msgstr "%s:%d: \\x{HEXNUMBER} 缺少了右邊的大括號" + +#: src/x-perl.c:1163 +#, c-format +msgid "%s:%d: invalid interpolation (\"\\l\") of 8bit character \"%c\"" +msgstr "%s:%d: 8bit 字元 “%c” 的轉換 (“\\l”) 無效" + +#: src/x-perl.c:1183 +#, c-format +msgid "%s:%d: invalid interpolation (\"\\u\") of 8bit character \"%c\"" +msgstr "%s:%d: 8bit 字元 “%c” 的轉換 (“\\u”) 無效" + +#: src/x-perl.c:1217 +#, c-format +msgid "%s:%d: invalid variable interpolation at \"%c\"" +msgstr "" + +#: src/x-perl.c:1230 +#, c-format +msgid "%s:%d: invalid interpolation (\"\\L\") of 8bit character \"%c\"" +msgstr "%s:%d: 8bit 字元 “%c” 的轉換 (“\\L”) 無效" + +#: src/x-perl.c:1247 +#, c-format +msgid "%s:%d: invalid interpolation (\"\\U\") of 8bit character \"%c\"" +msgstr "%s:%d: 8bit 字元 “%c” 的轉換 (“\\U”) 無效" + +#: src/x-python.c:278 +msgid "" +"Please specify the source encoding through --from-code or through a comment\n" +"as specified in http://www.python.org/peps/pep-0263.html.\n" +msgstr "" + +#: src/x-python.c:324 +#, fuzzy, c-format +msgid "" +"%s:%d: Invalid multibyte sequence.\n" +"Please specify the correct source encoding through --from-code or through a\n" +"comment as specified in http://www.python.org/peps/pep-0263.html.\n" +msgstr "" +"%s:%d: 出現無效的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-python.c:341 +#, fuzzy, c-format +msgid "" +"%s:%d: Long incomplete multibyte sequence.\n" +"Please specify the correct source encoding through --from-code or through a\n" +"comment as specified in http://www.python.org/peps/pep-0263.html.\n" +msgstr "" +"%s:%d: 出現無效而且十分長的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-python.c:354 +#, fuzzy, c-format +msgid "" +"%s:%d: Incomplete multibyte sequence at end of file.\n" +"Please specify the correct source encoding through --from-code or through a\n" +"comment as specified in http://www.python.org/peps/pep-0263.html.\n" +msgstr "" +"%s:%d: 檔案末端出現不完整的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-python.c:364 +#, fuzzy, c-format +msgid "" +"%s:%d: Incomplete multibyte sequence at end of line.\n" +"Please specify the correct source encoding through --from-code or through a\n" +"comment as specified in http://www.python.org/peps/pep-0263.html.\n" +msgstr "" +"%s:%d: 該行末端出現不完整的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-python.c:397 +#, fuzzy, c-format +msgid "" +"%s:%d: Invalid multibyte sequence.\n" +"Please specify the source encoding through --from-code or through a comment\n" +"as specified in http://www.python.org/peps/pep-0263.html.\n" +msgstr "" +"%s:%d: 出現無效的位元組序列。\n" +"請使用 --from-code 選項指定源代碼的正確文字編碼。\n" + +#: src/x-python.c:722 +#, c-format +msgid "Unknown encoding \"%s\". Proceeding with ASCII instead." +msgstr "" + +#: src/x-rst.c:108 +#, c-format +msgid "%s:%d: invalid string definition" +msgstr "%s:%d: 無效的字串定義" + +#: src/x-rst.c:172 +#, c-format +msgid "%s:%d: missing number after #" +msgstr "%s:%d: # 後缺少了數字" + +#: src/x-rst.c:207 +#, c-format +msgid "%s:%d: invalid string expression" +msgstr "%s:%d: 無效的字串表示式" + +#: src/x-sh.c:1075 +#, c-format +msgid "" +"%s:%lu: warning: the syntax $\"...\" is deprecated due to security reasons; " +"use eval_gettext instead" +msgstr "" +"%s:%lu: 警告:$\"...\" 這種格式因為安全理由已經過時;請改用 eval_gettext" + +#: src/x-vala.c:414 +#, fuzzy, c-format +msgid "%s:%d: warning: regular expression literal terminated too early" +msgstr "%s:%d: 警告:字串未完結" + +#: src/xgettext.c:545 +#, c-format +msgid "'%s' is not a valid encoding name. Using ASCII as fallback.\n" +msgstr "" + +#: src/xgettext.c:648 +#, c-format +msgid "--join-existing cannot be used when output is written to stdout" +msgstr "當結果被導向至標準輸出時,不可以用 --join-existing 選項" + +#: src/xgettext.c:653 +#, c-format +msgid "xgettext cannot work without keywords to look for" +msgstr "若無關鍵字,xgettext 將無法運作" + +#: src/xgettext.c:808 +#, fuzzy, c-format +msgid "warning: file '%s' extension '%s' is unknown; will try C" +msgstr "警告:無法辨認檔案 ‘%s’ 的副檔名 ‘%s’;會假設是 C 格式來處理" + +#: src/xgettext.c:859 +#, c-format +msgid "Extract translatable strings from given input files.\n" +msgstr "由指定的輸入檔抽取可翻譯的字串。\n" + +#: src/xgettext.c:882 +#, c-format +msgid "" +" -d, --default-domain=NAME use NAME.po for output (instead of messages." +"po)\n" +msgstr "" +" -d, --default-domain=NAME 使用 NAME.po 作為輸出檔 (而不是 messages.po)\n" + +#: src/xgettext.c:884 +#, c-format +msgid " -o, --output=FILE write output to specified file\n" +msgstr " -o, --output=FILE 將輸出內容寫入至指定檔案\n" + +#: src/xgettext.c:886 +#, c-format +msgid "" +" -p, --output-dir=DIR output files will be placed in directory DIR\n" +msgstr " -p, --output-dir=DIR 輸出檔會存取在指定目錄\n" + +#: src/xgettext.c:891 +#, c-format +msgid "Choice of input file language:\n" +msgstr "輸入檔的語言選擇:\n" + +#: src/xgettext.c:893 +#, fuzzy, c-format +msgid "" +" -L, --language=NAME recognise the specified language\n" +" (C, C++, ObjectiveC, PO, Shell, Python, " +"Lisp,\n" +" EmacsLisp, librep, Scheme, Smalltalk, Java,\n" +" JavaProperties, C#, awk, YCP, Tcl, Perl, " +"PHP,\n" +" GCC-source, NXStringTable, RST, Glade, Lua,\n" +" JavaScript, Vala, Desktop)\n" +msgstr "" +" -L, --language=語言 辨認指定的程式語言\n" +" (C, C++, ObjectiveC, PO, Shell, Python, " +"Lisp,\n" +" EmacsLisp, librep, Scheme, Smalltalk, Java,\n" +" JavaProperties, C#, awk, YCP, Tcl, Perl, " +"PHP,\n" +" GCC-source, NXStringTable, RST, Glade)\n" + +#: src/xgettext.c:900 +#, c-format +msgid " -C, --c++ shorthand for --language=C++\n" +msgstr " -C, --c++ --language=C++ 的簡寫\n" + +#: src/xgettext.c:902 +#, c-format +msgid "" +"By default the language is guessed depending on the input file name " +"extension.\n" +msgstr "預設的語言是由輸入檔的延伸檔名決定的。\n" + +#: src/xgettext.c:907 +#, c-format +msgid "" +" --from-code=NAME encoding of input files\n" +" (except for Python, Tcl, Glade)\n" +msgstr "" +" --from-code=NAME 輸入檔的文字編碼\n" +" (Python, Tcl, Glade 例外)\n" + +#: src/xgettext.c:910 +#, c-format +msgid "By default the input files are assumed to be in ASCII.\n" +msgstr "輸入檔內容預設會當作 ASCII 看待。\n" + +#: src/xgettext.c:915 +#, c-format +msgid " -j, --join-existing join messages with existing file\n" +msgstr " -j, --join-existing 合併已存在的訊息檔\n" + +#: src/xgettext.c:917 +#, c-format +msgid " -x, --exclude-file=FILE.po entries from FILE.po are not extracted\n" +msgstr " -x, --exclude-file=FILE.po 不取出屬於 FILE.po 的訊息\n" + +#: src/xgettext.c:919 +#, c-format +msgid "" +" -cTAG, --add-comments=TAG place comment blocks starting with TAG and\n" +" preceding keyword lines in output file\n" +" -c, --add-comments place all comment blocks preceding keyword " +"lines\n" +" in output file\n" +msgstr "" + +#: src/xgettext.c:925 +#, c-format +msgid "Language specific options:\n" +msgstr "個別語言特殊選項:\n" + +#: src/xgettext.c:927 +#, c-format +msgid " -a, --extract-all extract all strings\n" +msgstr " -a, --extract-all 抽取所有字串\n" + +#: src/xgettext.c:929 +#, fuzzy, c-format +msgid "" +" (only languages C, C++, ObjectiveC, Shell,\n" +" Python, Lisp, EmacsLisp, librep, Scheme, " +"Java,\n" +" C#, awk, Tcl, Perl, PHP, GCC-source, Glade,\n" +" Lua, JavaScript, Vala)\n" +msgstr "" +" (只適用於 C, C++, ObjectiveC, Shell,\n" +" Python, Lisp, EmacsLisp, librep, Scheme, " +"Java,\n" +" C#, awk, Tcl, Perl, PHP, GCC-source, Glade)\n" + +#: src/xgettext.c:937 +#, fuzzy, c-format +msgid "" +" (only languages C, C++, ObjectiveC, Shell,\n" +" Python, Lisp, EmacsLisp, librep, Scheme, " +"Java,\n" +" C#, awk, Tcl, Perl, PHP, GCC-source, Glade,\n" +" Lua, JavaScript, Vala, Desktop)\n" +msgstr "" +" (只適用於 C, C++, ObjectiveC, Shell,\n" +" Python, Lisp, EmacsLisp, librep, Scheme, " +"Java,\n" +" C#, awk, Tcl, Perl, PHP, GCC-source, Glade)\n" + +#: src/xgettext.c:942 +#, c-format +msgid "" +" --flag=WORD:ARG:FLAG additional flag for strings inside the " +"argument\n" +" number ARG of keyword WORD\n" +msgstr "" + +#: src/xgettext.c:945 +#, fuzzy, c-format +msgid "" +" (only languages C, C++, ObjectiveC, Shell,\n" +" Python, Lisp, EmacsLisp, librep, Scheme, " +"Java,\n" +" C#, awk, YCP, Tcl, Perl, PHP, GCC-source,\n" +" Lua, JavaScript, Vala)\n" +msgstr "" +" (只適用於 C, C++, ObjectiveC, Shell,\n" +" Python, Lisp, EmacsLisp, librep, Scheme, " +"Java,\n" +" C#, awk, YCP, Tcl, Perl, PHP, GCC-source)\n" + +#: src/xgettext.c:950 +#, c-format +msgid " -T, --trigraphs understand ANSI C trigraphs for input\n" +msgstr " -T, --trigraphs 支援讀取輸入內容中的 ANSI C trigraph\n" + +#: src/xgettext.c:952 +#, c-format +msgid " (only languages C, C++, ObjectiveC)\n" +msgstr " (只適用於 C, C++, ObjectiveC)\n" + +#: src/xgettext.c:954 +#, c-format +msgid " --qt recognize Qt format strings\n" +msgstr " --qt 辨認 Qt 格式的字串\n" + +#: src/xgettext.c:956 src/xgettext.c:960 src/xgettext.c:964 +#, c-format +msgid " (only language C++)\n" +msgstr " (只適用於 C++)\n" + +#: src/xgettext.c:958 +#, fuzzy, c-format +msgid " --kde recognize KDE 4 format strings\n" +msgstr " --qt 辨認 Qt 格式的字串\n" + +#: src/xgettext.c:962 +#, fuzzy, c-format +msgid " --boost recognize Boost format strings\n" +msgstr " --qt 辨認 Qt 格式的字串\n" + +#: src/xgettext.c:966 +#, c-format +msgid "" +" --debug more detailed formatstring recognition result\n" +msgstr " --debug 顯示較詳細的格式字串辨認結果\n" + +#: src/xgettext.c:991 +#, c-format +msgid " --properties-output write out a Java .properties file\n" +msgstr " --properties-output 輸出檔格式為 Java .properties 檔\n" + +#: src/xgettext.c:1006 +#, c-format +msgid " --copyright-holder=STRING set copyright holder in output\n" +msgstr " --copyright-holder=STRING 設定輸出檔的版權所有者\n" + +#: src/xgettext.c:1008 +#, c-format +msgid "" +" --foreign-user omit FSF copyright in output for foreign user\n" +msgstr "" +" --foreign-user 輸出檔不加上 FSF 的版權宣告,適用於 FSF 以外的" +"專案\n" + +#: src/xgettext.c:1010 +#, c-format +msgid " --package-name=PACKAGE set package name in output\n" +msgstr "" + +#: src/xgettext.c:1012 +#, fuzzy, c-format +msgid " --package-version=VERSION set package version in output\n" +msgstr " --copyright-holder=STRING 設定輸出檔的版權所有者\n" + +#: src/xgettext.c:1014 +#, c-format +msgid "" +" --msgid-bugs-address=EMAIL@ADDRESS set report address for msgid bugs\n" +msgstr "" +" --msgid-bugs-address=EMAIL@ADDRESS 指定匯報 msgid 問題時的郵件地址\n" + +#: src/xgettext.c:1016 +#, c-format +msgid "" +" -m[STRING], --msgstr-prefix[=STRING] use STRING or \"\" as prefix for " +"msgstr\n" +" values\n" +msgstr "" + +#: src/xgettext.c:1019 +#, c-format +msgid "" +" -M[STRING], --msgstr-suffix[=STRING] use STRING or \"\" as suffix for " +"msgstr\n" +" values\n" +msgstr "" + +#: src/xgettext.c:1840 +#, c-format +msgid "" +"A --flag argument doesn't have the <keyword>:<argnum>:[pass-]<flag> syntax: " +"%s" +msgstr "" + +#: src/xgettext.c:1965 +msgid "standard input" +msgstr "標準輸入" + +#: src/xgettext.c:2071 +#, c-format +msgid "Non-ASCII character at %s%s." +msgstr "" + +#: src/xgettext.c:2075 +#, c-format +msgid "Non-ASCII comment at or before %s%s." +msgstr "" + +#: src/xgettext.c:2080 +#, c-format +msgid "Non-ASCII string at %s%s." +msgstr "" + +#: src/xgettext.c:2186 src/xgettext.c:2219 src/xgettext.c:2281 +#, c-format +msgid "%s%s: warning: " +msgstr "%s%s: 警告:" + +#: src/xgettext.c:2189 +#, c-format +msgid "" +"Although being used in a format string position, the %s is not a valid %s " +"format string. Reason: %s\n" +msgstr "" + +#: src/xgettext.c:2190 +#, c-format +msgid "" +"Although declared as such, the %s is not a valid %s format string. Reason: " +"%s\n" +msgstr "縱使表面上 %s 宣告了是 %s 格式字串,但實際上不是。原因為:%s\n" + +#: src/xgettext.c:2221 +#, c-format +msgid "" +"'%s' format string with unnamed arguments cannot be properly localized:\n" +"The translator cannot reorder the arguments.\n" +"Please consider using a format string with named arguments,\n" +"and a mapping instead of a tuple for the arguments.\n" +msgstr "" + +#: src/xgettext.c:2283 +msgid "" +"Empty msgid. It is reserved by GNU gettext:\n" +"gettext(\"\") returns the header entry with\n" +"meta information, not the empty string.\n" +msgstr "" +"空白的 msgid。它是保留給 GNU gettext 專用的:\n" +"gettext(\"\") 會回傳檔案開始部份的資訊,\n" +"並非空白字串。\n" + +#: src/xgettext.c:2979 +#, fuzzy, c-format +msgid "ambiguous argument specification for keyword '%.*s'" +msgstr "%2$s 的引數 %1$s 不明確" + +#: src/xgettext.c:3006 +#, c-format +msgid "warning: missing context for keyword '%.*s'" +msgstr "" + +#: src/xgettext.c:3031 +#, c-format +msgid "warning: missing context for plural argument of keyword '%.*s'" +msgstr "" + +#: src/xgettext.c:3052 +#, c-format +msgid "context mismatch between singular and plural form" +msgstr "" + +#: src/xgettext.c:3427 +#, fuzzy +msgid "" +"The option --msgid-bugs-address was not specified.\n" +"If you are using a 'Makevars' file, please specify\n" +"the MSGID_BUGS_ADDRESS variable there; otherwise please\n" +"specify an --msgid-bugs-address command line option.\n" +msgstr "" +"您未使用 --msgid-bugs-address 選項。\n" +"如果您使用 ‘Makevars’ 檔案,請在其中設定\n" +"MSGID_BUGS_ADDRESS 變數;否則請在指令中\n" +"使用 --msgid-bugs-address 選項。\n" + +#: src/xgettext.c:3646 +#, fuzzy, c-format +msgid "language '%s' unknown" +msgstr "不明的語言 ‘%s’" + +#: libgettextpo/gettext-po.c:84 +msgid "<unnamed>" +msgstr "<未命名>" + +#~ msgid "%s: illegal option -- %c\n" +#~ msgstr "%s:選項不合法 -- %c\n" + +#~ msgid "DuplicateHandle failed with error code 0x%08x" +#~ msgstr "DuplicateHandle 失敗,錯誤碼為 0x%08x" + +#~ msgid "The %%J directive is only allowed at the beginning of the string." +#~ msgstr "%%J 只允許在字串最開始出現。" + +#~ msgid "" +#~ "Copyright (C) %s Free Software Foundation, Inc.\n" +#~ "This is free software; see the source for copying conditions. There is " +#~ "NO\n" +#~ "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR " +#~ "PURPOSE.\n" +#~ msgstr "" +#~ "版權所有 (C) %s Free Software Foundation, Inc.\n" +#~ "這是自由軟體;請參考原始碼的版權聲明。本軟體不提供任何保證,甚至不會包括\n" +#~ "可售性或適用於任何特定目的的保證。\n" + +#~ msgid "Not yet implemented." +#~ msgstr "功能尚未編寫。" + +#~ msgid "header field `%s' should start at beginning of line\n" +#~ msgstr "標頭欄位‘%s’應該位於行首\n" + +#~ msgid "field `%s' still has initial default value\n" +#~ msgstr "標頭欄位‘%s’仍然是預設值\n" + +#~ msgid "conversion failure" +#~ msgstr "轉換錯誤" + +#~ msgid "%s: warning: " +#~ msgstr "%s:警告:" + +#~ msgid "%s\n" +#~ msgstr "%s\n" + +#~ msgid "%s:%lu: warning: unterminated string" +#~ msgstr "%s:%lu: 警告:字串未結束" + +#~ msgid "%s:%d: fatal: plural message seen before singular message\n" +#~ msgstr "%s:%d: 嚴重錯誤:複數式出現在單數式之前\n" + +#~ msgid "Which is your email address?" +#~ msgstr "請問您的電子郵件地址?" + +#~ msgid "Please choose the number, or enter your email address." +#~ msgstr "請選擇數字,或者自行填上電子郵件地址。" + +#~ msgid "Invalid email address: invalid character." +#~ msgstr "電子郵件地址無效:字元無效。" + +#~ msgid "" +#~ "Invalid email address: need a fully qualified host name or domain name." +#~ msgstr "電子郵件地址無效:需要完整的主機名稱和網域名稱。" + +#~ msgid "Invalid email address: missing @" +#~ msgstr "電子郵件地址無效:缺少了 @" + +#~ msgid "Is the following your email address?" +#~ msgstr "以下的是否您的電子郵件地址?" + +#~ msgid "Please confirm by pressing Return, or enter your email address." +#~ msgstr "請按 [ENTER] 確認,或者自行輸入電子郵件地址。" + +#~ msgid "Couldn't find out about your email address." +#~ msgstr "無法決定您的郵件位址。" + +#~ msgid "Please enter your email address." +#~ msgstr "請自行輸入電子郵件地址。" |