path: root/base/gxpcopy.c

/* Copyright (C) 2001-2023 Artifex Software, Inc.
   All Rights Reserved.

   This software is provided AS-IS with no warranty, either express or
   implied.

   This software is distributed under license and may not be copied,
   modified or distributed except as expressly authorized under the terms
   of the license contained in the file LICENSE in this distribution.

   Refer to licensing information at http://www.artifex.com or contact
   Artifex Software, Inc.,  39 Mesa Street, Suite 108A, San Francisco,
   CA 94129, USA, for further information.
*/


/* Path copying and flattening */
#include "math_.h"
#include "gx.h"
#include "gserrors.h"
#include "gxfixed.h"
#include "gxfarith.h"
#include "gxgstate.h"		/* for access to line params */
#include "gzpath.h"

/* Forward declarations */
static void adjust_point_to_tangent(segment *, const segment *,
                                     const gs_fixed_point *);

static inline int
break_line_if_long(gx_path *ppath, const segment *pseg)
{
    fixed x0 = ppath->position.x;
    fixed y0 = ppath->position.y;

    if (gx_check_fixed_diff_overflow(pseg->pt.x, x0) ||
        gx_check_fixed_diff_overflow(pseg->pt.y, y0)) {
        fixed x, y;

        if (gx_check_fixed_sum_overflow(pseg->pt.x, x0))
            x = (pseg->pt.x >> 1) + (x0 >> 1);
        else
            x = (pseg->pt.x + x0) >> 1;
        if (gx_check_fixed_sum_overflow(pseg->pt.y, y0))
            y = (pseg->pt.y >> 1) + (y0 >> 1);
        else
            y = (pseg->pt.y + y0) >> 1;
        return gx_path_add_line_notes(ppath, x, y, pseg->notes);
        /* WARNING: Stringly speaking, the next half segment must get
           the sn_not_first flag. We don't bother, because that flag
           has no important meaning with colinear segments.
         */
    }
    return 0;
}
static inline int
break_gap_if_long(gx_path *ppath, const segment *pseg)
{
    fixed x0 = ppath->position.x;
    fixed y0 = ppath->position.y;

    if (gx_check_fixed_diff_overflow(pseg->pt.x, x0) ||
        gx_check_fixed_diff_overflow(pseg->pt.y, y0)) {
        fixed x, y;

        if (gx_check_fixed_sum_overflow(pseg->pt.x, x0))
            x = (pseg->pt.x >> 1) + (x0 >> 1);
        else
            x = (pseg->pt.x + x0) >> 1;
        if (gx_check_fixed_sum_overflow(pseg->pt.y, y0))
            y = (pseg->pt.y >> 1) + (y0 >> 1);
        else
            y = (pseg->pt.y + y0) >> 1;
        return gx_path_add_gap_notes(ppath, x, y, pseg->notes);
        /* WARNING: Stringly speaking, the next half segment must get
           the sn_not_first flag. We don't bother, because that flag
           has no important meaning with colinear segments.
         */
    }
    return 0;
}

/* Copy a path, optionally flattening or monotonizing it. */
/* If the copy fails, free the new path. */
int
gx_path_copy_reducing(const gx_path *ppath_old, gx_path *ppath,
                      fixed fixed_flatness, const gs_gstate *pgs,
                      gx_path_copy_options options)
{
    const segment *pseg;
    fixed flat = fixed_flatness;
    gs_fixed_point expansion;
    /*
     * Since we're going to be adding to the path, unshare it
     * before we start.
     */
    int code = gx_path_unshare(ppath);

    if (code < 0)
        return code;
#ifdef DEBUG
    if (gs_debug_c('P'))
        gx_dump_path(ppath_old, "before reducing");
#endif
    if (options & pco_for_stroke) {
        /* Precompute the maximum expansion of the bounding box. */
        double width = pgs->line_params.half_width;

        expansion.x =
            float2fixed((fabs(pgs->ctm.xx) + fabs(pgs->ctm.yx)) * width) * 2;
        expansion.y =
            float2fixed((fabs(pgs->ctm.xy) + fabs(pgs->ctm.yy)) * width) * 2;
    } else
        expansion.x = expansion.y = 0; /* Quiet gcc warning. */
    pseg = (const segment *)(ppath_old->first_subpath);
    while (pseg) {
        switch (pseg->type) {
            case s_start:
                code = gx_path_add_point(ppath,
                                         pseg->pt.x, pseg->pt.y);
                break;
            case s_curve:
                {
                    const curve_segment *pc = (const curve_segment *)pseg;

                    if (fixed_flatness == max_fixed) {	/* don't flatten */
                        if (options & pco_monotonize)
                            code = gx_curve_monotonize(ppath, pc);
                        else
                            code = gx_path_add_curve_notes(ppath,
                                     pc->p1.x, pc->p1.y, pc->p2.x, pc->p2.y,
                                           pc->pt.x, pc->pt.y, pseg->notes);
                    } else {
                        fixed x0 = ppath->position.x;
                        fixed y0 = ppath->position.y;
                        segment_notes notes = pseg->notes;
                        curve_segment cseg;
                        int k;

                        if (options & pco_for_stroke) {
                            /*
                             * When flattening for stroking, the flatness
                             * must apply to the outside of the resulting
                             * stroked region.  We approximate this by
                             * dividing the flatness by the ratio of the
                             * expanded bounding box to the original
                             * bounding box.  This is crude, but pretty
                             * simple to calculate, and produces reasonably
                             * good results.
                             */
                            fixed min01, max01, min23, max23;
                            fixed ex, ey, flat_x, flat_y;

#define SET_EXTENT(r, c0, c1, c2, c3)\
    BEGIN\
        if (c0 < c1) min01 = c0, max01 = c1;\
        else         min01 = c1, max01 = c0;\
        if (c2 < c3) min23 = c2, max23 = c3;\
        else         min23 = c3, max23 = c2;\
        r = max(max01, max23) - min(min01, min23);\
    END
                            SET_EXTENT(ex, x0, pc->p1.x, pc->p2.x, pc->pt.x);
                            SET_EXTENT(ey, y0, pc->p1.y, pc->p2.y, pc->pt.y);
#undef SET_EXTENT
                            /*
                             * We check for the degenerate case specially
                             * to avoid a division by zero.
                             */
                            if (ex == 0 || ey == 0)
                                if (ex != 0) {
                                    flat = fixed_mult_quo(fixed_flatness, ex,
                                                          ex + expansion.x);
                                    k = gx_curve_log2_samples(x0,y0,pc,flat);
                                } else if (ey != 0) {
                                    flat = fixed_mult_quo(fixed_flatness, ey,
                                                          ey + expansion.y);
                                    k = gx_curve_log2_samples(x0,y0,pc,flat);
                                } else
                                    k = 0;
                            else {
                                flat_x =
                                    fixed_mult_quo(fixed_flatness, ex,
                                                   ex + expansion.x);
                                flat_y =
                                    fixed_mult_quo(fixed_flatness, ey,
                                                   ey + expansion.y);
                                flat = min(flat_x, flat_y);
                                k = gx_curve_log2_samples(x0, y0, pc, flat);
                            }
                        } else
                            k = gx_curve_log2_samples(x0, y0, pc, flat);
                        if (options & pco_accurate) {
                            segment *start;
                            segment *end;

                            /*
                             * Add an extra line, which will become
                             * the tangent segment.
                             */
                            code = gx_path_add_line_notes(ppath, x0, y0,
                                                          notes);
                            if (code < 0)
                                break;
                            start = ppath->current_subpath->last;
                            notes |= sn_not_first;
                            cseg = *pc;
                            code = gx_subdivide_curve(ppath, k, &cseg, notes);
                            if (code < 0)
                                break;
                            /*
                             * Adjust the first and last segments so that
                             * they line up with the tangents.
                             */
                            end = ppath->current_subpath->last;
                            if ((code = gx_path_add_line_notes(ppath,
                                                          ppath->position.x,
                                                          ppath->position.y,
                                            pseg->notes | sn_not_first)) < 0)
                                break;
                            if (start->next->pt.x != pc->p1.x || start->next->pt.y != pc->p1.y)
                                adjust_point_to_tangent(start, start->next, &pc->p1);
                            else if (start->next->pt.x != pc->p2.x || start->next->pt.y != pc->p2.y)
                                adjust_point_to_tangent(start, start->next, &pc->p2);
                            else
                                adjust_point_to_tangent(start, start->next, &end->prev->pt);
                            if (end->prev->pt.x != pc->p2.x || end->prev->pt.y != pc->p2.y)
                                adjust_point_to_tangent(end, end->prev, &pc->p2);
                            else if (end->prev->pt.x != pc->p1.x || end->prev->pt.y != pc->p1.y)
                                adjust_point_to_tangent(end, end->prev, &pc->p1);
                            else
                                adjust_point_to_tangent(end, end->prev, &start->pt);
                        } else {
                            cseg = *pc;
                            code = gx_subdivide_curve(ppath, k, &cseg, notes);
                        }
                    }
                    break;
                }
            case s_line:
                code = break_line_if_long(ppath, pseg);
                if (code < 0)
                    break;
                code = gx_path_add_line_notes(ppath,
                                       pseg->pt.x, pseg->pt.y, pseg->notes);
                break;
            case s_gap:
                code = break_gap_if_long(ppath, pseg);
                if (code < 0)
                    break;
                code = gx_path_add_gap_notes(ppath,
                                       pseg->pt.x, pseg->pt.y, pseg->notes);
                break;
            case s_dash:
                {
                    const dash_segment *pd = (const dash_segment *)pseg;

                    code = gx_path_add_dash_notes(ppath,
                                       pd->pt.x, pd->pt.y, pd->tangent.x, pd->tangent.y, pseg->notes);
                    break;
                }
            case s_line_close:
                code = break_line_if_long(ppath, pseg);
                if (code < 0)
                    break;
                code = gx_path_close_subpath(ppath);
                break;
            default:		/* can't happen */
                code = gs_note_error(gs_error_unregistered);
        }
        if (code < 0) {
            gx_path_new(ppath);
            return code;
        }
        pseg = pseg->next;
    }
    if (path_last_is_moveto(ppath_old)) {
        code = gx_path_add_point(ppath, ppath_old->position.x,
                          ppath_old->position.y);
        if (code < 0) {
            gx_path_new(ppath);
            return code;
        }
    }
    if (ppath_old->bbox_set) {
        if (ppath->bbox_set) {
            ppath->bbox.p.x = min(ppath_old->bbox.p.x, ppath->bbox.p.x);
            ppath->bbox.p.y = min(ppath_old->bbox.p.y, ppath->bbox.p.y);
            ppath->bbox.q.x = max(ppath_old->bbox.q.x, ppath->bbox.q.x);
            ppath->bbox.q.y = max(ppath_old->bbox.q.y, ppath->bbox.q.y);
        } else {
            ppath->bbox_set = true;
            ppath->bbox = ppath_old->bbox;
        }
    }
#ifdef DEBUG
    if (gs_debug_c('P'))
        gx_dump_path(ppath, "after reducing");
#endif
    return 0;
}

/*
 * Adjust one end of a line (the first or last line of a flattened curve)
 * so it falls on the curve tangent.  The closest point on the line from
 * (0,0) to (C,D) to a point (U,V) -- i.e., the point on the line at which
 * a perpendicular line from the point intersects it -- is given by
 *      T = (C*U + D*V) / (C^2 + D^2)
 *      (X,Y) = (C*T,D*T)
 * However, any smaller value of T will also work: the one we actually
 * use is 0.25 * the value we just derived.  We must check that
 * numerical instabilities don't lead to a negative value of T.
 */
static void
adjust_point_to_tangent(segment * pseg, const segment * next,
                        const gs_fixed_point * p1)
{
    const fixed x0 = pseg->pt.x, y0 = pseg->pt.y;
    const fixed fC = p1->x - x0, fD = p1->y - y0;

    /*
     * By far the commonest case is that the end of the curve is
     * horizontal or vertical.  Check for this specially, because
     * we can handle it with far less work (and no floating point).
     */
    if (fC == 0) {
        /* Vertical tangent. */
        const fixed DT = arith_rshift(next->pt.y - y0, 2);

        if (fD == 0)
            return;		/* anomalous case */
        if_debug1('2', "[2]adjusting vertical: DT = %g\n",
                  fixed2float(DT));
        if ((DT ^ fD) > 0) /* lgtm [cpp/bitwise-sign-check] */
            pseg->pt.y = DT + y0;
    } else if (fD == 0) {
        /* Horizontal tangent. */
        const fixed CT = arith_rshift(next->pt.x - x0, 2);

        if_debug1('2', "[2]adjusting horizontal: CT = %g\n",
                  fixed2float(CT));
        if ((CT ^ fC) > 0) /* lgtm [cpp/bitwise-sign-check] */
            pseg->pt.x = CT + x0;
    } else {
        /* General case. */
        const double C = fC, D = fD;
        double T = (C * (next->pt.x - x0) + D * (next->pt.y - y0)) /
        (C * C + D * D);

        if_debug3('2', "[2]adjusting: C = %g, D = %g, T = %g\n",
                  C, D, T);
        if (T > 0) {
            if (T > 1) {
                /* Don't go outside the curve bounding box. */
                T = 1;
            }
            pseg->pt.x = arith_rshift((fixed) (C * T), 2) + x0;
            pseg->pt.y = arith_rshift((fixed) (D * T), 2) + y0;
        }
    }
}

/* ---------------- Monotonic curves ---------------- */

/* Test whether a path is free of non-monotonic curves. */
bool
gx_path__check_curves(const gx_path * ppath, gx_path_copy_options options, fixed fixed_flat)
{
    const segment *pseg = (const segment *)(ppath->first_subpath);
    gs_fixed_point pt0;

    pt0.x = pt0.y = 0; /* Quiet gcc warning. */
    while (pseg) {
        switch (pseg->type) {
            case s_start:
                {
                    const subpath *psub = (const subpath *)pseg;

                    /* Skip subpaths without curves. */
                    if (!psub->curve_count)
                        pseg = psub->last;
                }
                break;
            case s_line:
            case s_gap:
                if (gx_check_fixed_diff_overflow(pseg->pt.x, pt0.x) ||
                    gx_check_fixed_diff_overflow(pseg->pt.y, pt0.y))
                    return false;
                break;
            case s_curve:
                {
                    const curve_segment *pc = (const curve_segment *)pseg;

                    if (options & pco_monotonize) {
                        double t[2];
                        int nz = gx_curve_monotonic_points(pt0.y,
                                               pc->p1.y, pc->p2.y, pc->pt.y, t);

                        if (nz != 0)
                            return false;
                        nz = gx_curve_monotonic_points(pt0.x,
                                               pc->p1.x, pc->p2.x, pc->pt.x, t);
                        if (nz != 0)
                            return false;
                    }
                    if (options & pco_small_curves) {
                        fixed ax, bx, cx, ay, by, cy;
                        int k = gx_curve_log2_samples(pt0.x, pt0.y, pc, fixed_flat);

                        if(!curve_coeffs_ranged(pt0.x, pc->p1.x, pc->p2.x, pc->pt.x,
                                pt0.y, pc->p1.y, pc->p2.y, pc->pt.y,
                                &ax, &bx, &cx, &ay, &by, &cy, k))
                            return false;
                    if (gx_check_fixed_diff_overflow(pseg->pt.x, pt0.x) ||
                        gx_check_fixed_diff_overflow(pseg->pt.y, pt0.y))
                        return false;
                    }
                }
                break;
            default:
                ;
        }
        pt0 = pseg->pt;
        pseg = pseg->next;
    }
    return true;
}

/* Test whether a path is free of long segments. */
/* WARNING : This function checks the distance between
 * the starting point and the ending point of a segment.
 * When they are not too far, a curve nevertheless may be too long.
 * Don't worry about it here, because we assume
 * this function is never called with paths which have curves.
 */
bool
gx_path_has_long_segments(const gx_path * ppath)
{
    const segment *pseg = (const segment *)(ppath->first_subpath);
    gs_fixed_point pt0;

    pt0.x = pt0.y = 0; /* Quiet gcc warning. */
    while (pseg) {
        switch (pseg->type) {
            case s_start:
                break;
            default:
                if (gx_check_fixed_diff_overflow(pseg->pt.x, pt0.x) ||
                    gx_check_fixed_diff_overflow(pseg->pt.y, pt0.y))
                    return true;
                break;
        }
        pt0 = pseg->pt;
        pseg = pseg->next;
    }
    return false;
}

/* Monotonize a curve, by splitting it if necessary. */
/* In the worst case, this could split the curve into 9 pieces. */
int
gx_curve_monotonize(gx_path * ppath, const curve_segment * pc)
{
    fixed x0 = ppath->position.x, y0 = ppath->position.y;
    segment_notes notes = pc->notes;
    double t[5], tt = 1, tp;
    int c[5];
    int n0, n1, n, i, j, k = 0;
    fixed ax, bx, cx, ay, by, cy, v01, v12;
    fixed px, py, qx, qy, rx, ry, sx, sy;
    const double delta = 0.0000001;

    /* Roots of the derivative : */
    n0 = gx_curve_monotonic_points(x0, pc->p1.x, pc->p2.x, pc->pt.x, t);
    n1 = gx_curve_monotonic_points(y0, pc->p1.y, pc->p2.y, pc->pt.y, t + n0);
    n = n0 + n1;
    if (n == 0)
        return gx_path_add_curve_notes(ppath, pc->p1.x, pc->p1.y,
                pc->p2.x, pc->p2.y, pc->pt.x, pc->pt.y, notes);
    if (n0 > 0)
        c[0] = 1;
    if (n0 > 1)
        c[1] = 1;
    if (n1 > 0)
        c[n0] = 2;
    if (n1 > 1)
        c[n0 + 1] = 2;
    /* Order roots : */
    for (i = 0; i < n; i++)
        for (j = i + 1; j < n; j++)
            if (t[i] > t[j]) {
                int w;
                double v = t[i]; t[i] = t[j]; t[j] = v;
                w = c[i]; c[i] = c[j]; c[j] = w;
            }
    /* Drop roots near zero : */
    for (k = 0; k < n; k++)
        if (t[k] >= delta)
            break;
    /* Merge close roots, and drop roots at 1 : */
    if (t[n - 1] > 1 - delta)
        n--;
    for (i = k + 1, j = k; i < n && t[k] < 1 - delta; i++)
        if (any_abs(t[i] - t[j]) < delta) {
            t[j] = (t[j] + t[i]) / 2; /* Unlikely 3 roots are close. */
            c[j] |= c[i];
        } else {
            j++;
            t[j] = t[i];
            c[j] = c[i];
        }
    n = j + 1;
    /* Do split : */
    curve_points_to_coefficients(x0, pc->p1.x, pc->p2.x, pc->pt.x, ax, bx, cx, v01, v12);
    curve_points_to_coefficients(y0, pc->p1.y, pc->p2.y, pc->pt.y, ay, by, cy, v01, v12);
    ax *= 3, bx *= 2; /* Coefficients of the derivative. */
    ay *= 3, by *= 2;
    px = x0;
    py = y0;
    qx = (fixed)((pc->p1.x - px) * t[0] + 0.5);
    qy = (fixed)((pc->p1.y - py) * t[0] + 0.5);
    tp = 0;
    for (i = k; i < n; i++) {
        double ti = t[i];
        double t2 = ti * ti, t3 = t2 * ti;
        double omt = 1 - ti, omt2 = omt * omt, omt3 = omt2 * omt;
        double x = x0 * omt3 + 3 * pc->p1.x * omt2 * ti + 3 * pc->p2.x * omt * t2 + pc->pt.x * t3;
        double y = y0 * omt3 + 3 * pc->p1.y * omt2 * ti + 3 * pc->p2.y * omt * t2 + pc->pt.y * t3;
        double ddx = (c[i] & 1 ? 0 : ax * t2 + bx * ti + cx); /* Suppress noise. */
        double ddy = (c[i] & 2 ? 0 : ay * t2 + by * ti + cy);
        fixed dx = (fixed)(ddx + 0.5);
        fixed dy = (fixed)(ddy + 0.5);
        int code;

        tt = (i + 1 < n ? t[i + 1] : 1) - ti;
        rx = (fixed)(dx * (t[i] - tp) / 3 + 0.5);
        ry = (fixed)(dy * (t[i] - tp) / 3 + 0.5);
        sx = (fixed)(x + 0.5);
        sy = (fixed)(y + 0.5);
        /* Suppress the derivative sign noise near a peak : */
        if ((double)(sx - px) * qx + (double)(sy - py) * qy < 0)
            qx = -qx, qy = -qy;
        if ((double)(sx - px) * rx + (double)(sy - py) * ry < 0)
            rx = -rx, ry = -qy;
        /* Do add : */
        code = gx_path_add_curve_notes(ppath, px + qx, py + qy, sx - rx, sy - ry, sx, sy, notes);
        if (code < 0)
            return code;
        notes |= sn_not_first;
        px = sx;
        py = sy;
        qx = (fixed)(dx * tt / 3 + 0.5);
        qy = (fixed)(dy * tt / 3 + 0.5);
        tp = t[i];
    }
    sx = pc->pt.x;
    sy = pc->pt.y;
    rx = (fixed)((pc->pt.x - pc->p2.x) * tt + 0.5);
    ry = (fixed)((pc->pt.y - pc->p2.y) * tt + 0.5);
    /* Suppress the derivative sign noise near peaks : */
    if ((double)(sx - px) * qx + (double)(sy - py) * qy < 0)
        qx = -qx, qy = -qy;
    if ((double)(sx - px) * rx + (double)(sy - py) * ry < 0)
        rx = -rx, ry = -qy;
    return gx_path_add_curve_notes(ppath, px + qx, py + qy, sx - rx, sy - ry, sx, sy, notes);
}

/*
 * Split a curve if necessary into pieces that are monotonic in X or Y as a
 * function of the curve parameter t.  This allows us to rasterize curves
 * directly without pre-flattening.  This takes a fair amount of analysis....
 * Store the values of t of the split points in pst[0] and pst[1].  Return
 * the number of split points (0, 1, or 2).
 */
int
gx_curve_monotonic_points(fixed v0, fixed v1, fixed v2, fixed v3,
                          double pst[2])
{
    /*
       Let
       v(t) = a*t^3 + b*t^2 + c*t + d, 0 <= t <= 1.
       Then
       dv(t) = 3*a*t^2 + 2*b*t + c.
       v(t) has a local minimum or maximum (or inflection point)
       precisely where dv(t) = 0.  Now the roots of dv(t) = 0 (i.e.,
       the zeros of dv(t)) are at
       t =  ( -2*b +/- sqrt(4*b^2 - 12*a*c) ) / 6*a
       =    ( -b +/- sqrt(b^2 - 3*a*c) ) / 3*a
       (Note that real roots exist iff b^2 >= 3*a*c.)
       We want to know if these lie in the range (0..1).
       (The endpoints don't count.)  Call such a root a "valid zero."
       Since computing the roots is expensive, we would like to have
       some cheap tests to filter out cases where they don't exist
       (i.e., where the curve is already monotonic).
     */
    fixed v01, v12, a, b, c, b2, a3;
    fixed dv_end, b2abs, a3abs;

    curve_points_to_coefficients(v0, v1, v2, v3, a, b, c, v01, v12);
    b2 = b << 1;
    a3 = (a << 1) + a;
    /*
       If a = 0, the only possible zero is t = -c / 2*b.
       This zero is valid iff sign(c) != sign(b) and 0 < |c| < 2*|b|.
     */
    if (a == 0) {
        if ((b ^ c) < 0 && any_abs(c) < any_abs(b2) && c != 0) {
            *pst = (double)(-c) / b2;
            return 1;
        } else
            return 0;
    }
    /*
       Iff a curve is horizontal at t = 0, c = 0.  In this case,
       there can be at most one other zero, at -2*b / 3*a.
       This zero is valid iff sign(a) != sign(b) and 0 < 2*|b| < 3*|a|.
     */
    if (c == 0) {
        if ((a ^ b) < 0 && any_abs(b2) < any_abs(a3) && b != 0) {
            *pst = (double)(-b2) / a3;
            return 1;
        } else
            return 0;
    }
    /*
       Similarly, iff a curve is horizontal at t = 1, 3*a + 2*b + c = 0.
       In this case, there can be at most one other zero,
       at -1 - 2*b / 3*a, iff sign(a) != sign(b) and 1 < -2*b / 3*a < 2,
       i.e., 3*|a| < 2*|b| < 6*|a|.
     */
    else if ((dv_end = a3 + b2 + c) == 0) {
        if ((a ^ b) < 0 &&
            (b2abs = any_abs(b2)) > (a3abs = any_abs(a3)) &&
            b2abs < a3abs << 1
            ) {
            *pst = (double)(-b2 - a3) / a3;
            return 1;
        } else
            return 0;
    }
    /*
       If sign(dv_end) != sign(c), at least one valid zero exists,
       since dv(0) and dv(1) have opposite signs and hence
       dv(t) must be zero somewhere in the interval [0..1].
     */
    else if ((dv_end ^ c) < 0);
    /*
       If sign(a) = sign(b), no valid zero exists,
       since dv is monotonic on [0..1] and has the same sign
       at both endpoints.
     */
    else if ((a ^ b) >= 0)
        return 0;
    /*
       Otherwise, dv(t) may be non-monotonic on [0..1]; it has valid zeros
       iff its sign anywhere in this interval is different from its sign
       at the endpoints, which occurs iff it has an extremum in this
       interval and the extremum is of the opposite sign from c.
       To find this out, we look for the local extremum of dv(t)
       by observing
       d2v(t) = 6*a*t + 2*b
       which has a zero only at
       t1 = -b / 3*a
       Now if t1 <= 0 or t1 >= 1, no valid zero exists.
       Note that we just determined that sign(a) != sign(b), so we know t1 > 0.
     */
    else if (any_abs(b) >= any_abs(a3))
        return 0;
    /*
       Otherwise, we just go ahead with the computation of the roots,
       and test them for being in the correct range.  Note that a valid
       zero is an inflection point of v(t) iff d2v(t) = 0; we don't
       bother to check for this case, since it's rare.
     */
    {
        double nbf = (double)(-b);
        double a3f = (double)a3;
        double radicand = nbf * nbf - a3f * c;

        if (radicand < 0) {
            if_debug1('2', "[2]negative radicand = %g\n", radicand);
            return 0;
        } {
            double root = sqrt(radicand);
            int nzeros = 0;
            double z = (nbf - root) / a3f;

            /*
             * We need to return the zeros in the correct order.
             * We know that root is non-negative, but a3f may be either
             * positive or negative, so we need to check the ordering
             * explicitly.
             */
            if_debug2('2', "[2]zeros at %g, %g\n", z, (nbf + root) / a3f);
            if (z > 0 && z < 1)
                *pst = z, nzeros = 1;
            if (root != 0) {
                z = (nbf + root) / a3f;
                if (z > 0 && z < 1) {
                    if (nzeros && a3f < 0)	/* order is reversed */
                        pst[1] = *pst, *pst = z;
                    else
                        pst[nzeros] = z;
                    nzeros++;
                }
            }
            return nzeros;
        }
    }
}

/* ---------------- Path optimization for the filling algorithm. ---------------- */

static bool
find_contacting_segments(const subpath *sp0, segment *sp0last,
                         const subpath *sp1, segment *sp1last,
                         segment **sc0, segment **sc1)
{
    segment *s0, *s1;
    const segment *s0s, *s1s;
    int count0, count1, search_limit = 50;
    int min_length = fixed_1 * 1;

    /* This is a simplified algorithm, which only checks for quazi-colinear vertical lines.
       "Quazi-vertical" means dx <= 1 && dy >= min_length . */
    /* To avoid a big unuseful expence of the processor time,
       we search the first subpath from the end
       (assuming that it was recently merged near the end),
       and restrict the search with search_limit segments
       against a quadratic scanning of two long subpaths.
       Thus algorithm is not necessary finds anything contacting.
       Instead it either quickly finds something, or maybe not. */
    for (s0 = sp0last, count0 = 0; count0 < search_limit && s0 != (segment *)sp0; s0 = s0->prev, count0++) {
        s0s = s0->prev;
        if ((s0->type == s_line || s0->type == s_gap) &&
            (s0s->pt.x == s0->pt.x ||
             (any_abs(s0s->pt.x - s0->pt.x) == 1 &&
              any_abs(s0s->pt.y - s0->pt.y) > min_length))) {
            for (s1 = sp1last, count1 = 0; count1 < search_limit && s1 != (segment *)sp1; s1 = s1->prev, count1++) {
                s1s = s1->prev;
                if ((s1->type == s_line || s1->type == s_gap) &&
                    (s1s->pt.x == s1->pt.x ||
                     (any_abs(s1s->pt.x - s1->pt.x) == 1 && any_abs(s1s->pt.y - s1->pt.y) > min_length))) {
                    if (s0s->pt.x == s1s->pt.x || s0->pt.x == s1->pt.x || s0->pt.x == s1s->pt.x || s0s->pt.x == s1->pt.x) {
                        if (s0s->pt.y < s0->pt.y && s1s->pt.y > s1->pt.y) {
                            fixed y0 = max(s0s->pt.y, s1->pt.y);
                            fixed y1 = min(s0->pt.y, s1s->pt.y);

                            if (y0 <= y1) {
                                *sc0 = s0;
                                *sc1 = s1;
                                return true;
                            }
                        }
                        if (s0s->pt.y > s0->pt.y && s1s->pt.y < s1->pt.y) {
                            fixed y0 = max(s0->pt.y, s1s->pt.y);
                            fixed y1 = min(s0s->pt.y, s1->pt.y);

                            if (y0 <= y1) {
                                *sc0 = s0;
                                *sc1 = s1;
                                return true;
                            }
                        }
                    }
                }
            }
        }
    }
    return false;
}

int
gx_path_merge_contacting_contours(gx_path *ppath)
{
    /* Now this is a simplified algorithm,
       which merge only contours by a common quazi-vertical line. */
    /* Note the merged contour is not equivalent to sum of original contours,
       because we ignore small coordinate differences within fixed_epsilon. */
    int window = 5/* max spot holes */ * 6/* segments per subpath */;
    subpath *sp0 = ppath->segments->contents.subpath_first;

    for (; sp0 != NULL; sp0 = (subpath *)sp0->last->next) {
        segment *sp0last = sp0->last;
        subpath *sp1 = (subpath *)sp0last->next, *spnext;
        subpath *sp1p = sp0;
        int count;

        for (count = 0; sp1 != NULL && count < window; sp1 = spnext, count++) {
            segment *sp1last = sp1->last;
            segment *sc0, *sc1, *old_first;

            spnext = (subpath *)sp1last->next;
            if (find_contacting_segments(sp0, sp0last, sp1, sp1last, &sc0, &sc1)) {
                /* Detach the subpath 1 from the path: */
                sp1->prev->next = sp1last->next;
                if (sp1last->next != NULL)
                    sp1last->next->prev = sp1->prev;
                sp1->prev = 0;
                sp1last->next = 0;
                old_first = sp1->next;
                /* sp1 is not longer in use. Move subpath_current from it for safe removing : */
                if (ppath->segments->contents.subpath_current == sp1) {
                    ppath->segments->contents.subpath_current = sp1p;
                }
                if (sp1last->type == s_line_close) {
                    /* Change 'closepath' of the subpath 1 to a line (maybe degenerate) : */
                    sp1last->type = s_line;
                    /* sp1 is not longer in use. Free it : */
                    gs_free_object(gs_memory_stable(ppath->memory), sp1, "gx_path_merge_contacting_contours");
                } else if (sp1last->pt.x == sp1->pt.x && sp1last->pt.y == sp1->pt.y) {
                    /* Implicit closepath with zero length. Don't need a new segment. */
                    /* sp1 is not longer in use. Free it : */
                    gs_free_object(gs_memory_stable(ppath->memory), sp1, "gx_path_merge_contacting_contours");
                } else {
                    /* Insert the closing line segment. */
                    /* sp1 is not longer in use. Convert it to the line segment : */
                    sp1->type = s_line;
                    sp1last->next = (segment *)sp1;
                    sp1->next = NULL;
                    sp1->prev = sp1last;
                    sp1->last = NULL; /* Safety for garbager. */
                    sp1last = (segment *)sp1;
                }
                sp1 = 0; /* Safety. */
                /* Rotate the subpath 1 to sc1 : */
                {   /* Detach s_start and make a loop : */
                    sp1last->next = old_first;
                    old_first->prev = sp1last;
                    /* Unlink before sc1 : */
                    sp1last = sc1->prev;
                    sc1->prev->next = 0;
                    sc1->prev = 0; /* Safety. */
                    /* sp1 is not longer in use. Free it : */
                    if (ppath->segments->contents.subpath_current == sp1) {
                        ppath->segments->contents.subpath_current = sp1p;
                    }
                    gs_free_object(gs_memory_stable(ppath->memory), sp1, "gx_path_merge_contacting_contours");
                    sp1 = 0; /* Safety. */
                }
                /* Insert the subpath 1 into the subpath 0 before sc0 :*/
                sc0->prev->next = sc1;
                sc1->prev = sc0->prev;
                sp1last->next = sc0;
                sc0->prev = sp1last;
                /* Remove degenearte "bridge" segments : (fixme: Not done due to low importance). */
                /* Edit the subpath count : */
                ppath->subpath_count--;
            } else
                sp1p = sp1;
        }
    }
    return 0;
}

static int
is_colinear(gs_fixed_rect *rect, fixed x, fixed y)
{
    fixed x0 = rect->p.x;
    fixed y0 = rect->p.y;
    fixed x1 = rect->q.x;
    fixed y1 = rect->q.y;

    if (x0 == x1) {
        if (y0 == y1) {
            /* Initial case */
            /* Still counts as colinear */
        } else if (x == x0) {
            /* OK! */
        } else {
            return 0; /* Not colinear */
        }
    } else if (rect->p.y == rect->q.y) {
        if (y == rect->p.y) {
            /* OK */
        } else {
            return 0; /* Not colinear */
        }
    } else {
        /* Need to do hairy maths */
        /* The distance of a point (x,y) from the line passing through
         * (x0,y0) and (x1,y1) is:
         * d = |(y1-y0)x - (x1-x0)y + x1y0 - y1x0| / SQR((y1-y0)^2 + (x1-x0)^2)
         *
         * We want d <= epsilon to count as colinear.
         *
         * d = |(y1-y0)x - (x1-x0)y + x1y0 - y1x0| / SQR((y1-y0)^2 + (x1-x0)^2) <= epsilon
         *
         * |(y1-y0)x - (x1-x0)y + x1y0 - y1x0| <= epsilon * SQR((y1-y0)^2 + (x1-x0)^2)
         *
         * ((y1-y0)x - (x1-x0)y + x1y0 - y1x0)^2 <= epsilon^2 * ((y1-y0)^2 + (x1-x0)^2)
         */
        int64_t ix1 = ((int64_t)x1);
        int64_t iy1 = ((int64_t)y1);
        int64_t dx  = ix1 - x0;
        int64_t dy  = iy1 - y0;
        int64_t num = dy*x - dx*y + ix1*y0 - iy1*x0;
        int64_t den = dx*dx + dy*dy;
        int epsilon_squared = 2;

        if (num < 0)
            num = -num;
        while (num > (1<<30)) {
            num >>= 2;
            den >>= 1;
            if (den == 0)
                return 0; /* Not colinear */
        }
        num *= num;
        if (num > epsilon_squared * den)
            return 0;
    }
    /* rect is not really a rect. It's just a pair of points. We guarantee that x0 <= x1. */
    if (x == x0) {
        if (y < y0)
            rect->p.y = y;
        else if (y > y1)
            rect->q.y = y;
    } else if (x < x0) {
        rect->p.x = x;
        rect->p.y = y;
    } else {
        rect->q.x = x;
        rect->q.y = y;
    }

    return 1;
}

static int
gx_path_copy_eliding_1d(const gx_path *ppath_old, gx_path *ppath)
{
    const segment *pseg;
    /*
     * Since we're going to be adding to the path, unshare it
     * before we start.
     */
    int code = gx_path_unshare(ppath);

    if (code < 0)
        return code;
#ifdef DEBUG
    if (gs_debug_c('P'))
        gx_dump_path(ppath_old, "before eliding_1d");
#endif

    pseg = (const segment *)(ppath_old->first_subpath);
    while (pseg != NULL) {
        const segment *look = pseg;
        gs_fixed_rect rect;

        rect.p.x = rect.q.x = look->pt.x;
        rect.p.y = rect.q.y = look->pt.y;

        if (look->type != s_start) {
            dlprintf("Unlikely?");
        }

        look = look->next;
        while (look != NULL && look->type != s_start) {
            if (look->type == s_curve) {
                const curve_segment *pc = (const curve_segment *)look;
                if (!is_colinear(&rect, pc->p1.x, pc->p1.y) ||
                    !is_colinear(&rect, pc->p2.x, pc->p2.y) ||
                    !is_colinear(&rect, pc->pt.x, pc->pt.y))
                    goto not_colinear;
            } else if (!is_colinear(&rect, look->pt.x, look->pt.y)) {
                goto not_colinear;
            }
            look = look->next;
        }
        pseg = look;
        if (0)
        {
not_colinear:
            /* Not colinear. We want to keep this section. */
            while (look != NULL && look->type != s_start)
                look = look->next;
            while (pseg != look && code >= 0) {
                /* Copy */
                switch (pseg->type) {
                    case s_start:
                        code = gx_path_add_point(ppath,
                                                 pseg->pt.x, pseg->pt.y);
                        break;
                    case s_curve:
                        {
                            const curve_segment *pc = (const curve_segment *)pseg;

                            code = gx_path_add_curve_notes(ppath,
                                             pc->p1.x, pc->p1.y, pc->p2.x, pc->p2.y,
                                                   pc->pt.x, pc->pt.y, pseg->notes);
                            break;
                        }
                    case s_line:
                        code = gx_path_add_line_notes(ppath,
                                               pseg->pt.x, pseg->pt.y, pseg->notes);
                        break;
                    case s_gap:
                        code = gx_path_add_gap_notes(ppath,
                                               pseg->pt.x, pseg->pt.y, pseg->notes);
                        break;
                    case s_dash:
                        {
                            const dash_segment *pd = (const dash_segment *)pseg;

                            code = gx_path_add_dash_notes(ppath,
                                               pd->pt.x, pd->pt.y, pd->tangent.x, pd->tangent.y, pseg->notes);
                            break;
                        }
                    case s_line_close:
                        code = gx_path_close_subpath(ppath);
                        break;
                    default:		/* can't happen */
                        code = gs_note_error(gs_error_unregistered);
                }
                pseg = pseg->next;
            }
            if (code < 0) {
                gx_path_new(ppath);
                return code;
            }
        }
    }
    ppath->bbox_set = false;
#ifdef DEBUG
    if (gs_debug_c('P'))
        gx_dump_path(ppath, "after eliding_1d");
#endif
    return 0;
}

int
gx_path_elide_1d(gx_path *ppath)
{
    int code;
    gx_path path;

    gx_path_init_local(&path, ppath->memory);
    code = gx_path_copy_eliding_1d(ppath, &path);
    if (code < 0)
        return code;
    gx_path_assign_free(ppath, &path);
    gx_path_free(&path, "gx_path_elide_1d");

    return 0;
}