path: root/contrib/gdevlx32.c

/*
 * Lexmark 3200 Color Jetprinter driver
 *
 * version 0.4.1
 *
 * Copyright 2000 by Daniel Gordini (dgordin@tin.it)
 *
 * --------------------------------------------------------------------
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to:
 *
 * Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor
 * Boston, MA 02110-1301
 * USA
 *
 *
 * --------------------------------------------------------------------
 *
 * This driver is almost 100% original code but it is based
 * on protocol information partly discovered by Andrew Onifer III
 * (http://www.mindspring.com/~aonifer) and Peter B. West
 * (http://www.powerup.com.au/~pbwest) that were used as a starting
 * base for the reverse-engineering of the protocol.
 *
 * Please mail me bug reports, comments and suggestions.
 *
 * Don't forget to read the release notes before installing !!
 *
 */

#include "gdevprn.h"
#include "gsparams.h"

#ifndef TRUE
#define TRUE  1
#endif

#ifndef FALSE
#define FALSE 0
#endif

typedef struct lxm_device_s lxm_device;

/* General global data that must be accessible
 * by all routines. (Now moved into device struct).
 */
typedef struct pagedata_s
{
        /* General invariant data */
        int numbytes;    /* Number of bytes in a scanline of the buffer */
        int numrbytes;   /* Width (in bytes) of one rasterized scanline */
        int goffset;     /* Guard offset at each side of each scanline (columns) */
        int numblines;   /* Number of lines in a buffer */
        int numlines;    /* Number of lines in a vertical head pass */
        int rendermode;  /* Type of rendering */
        int numvlines;   /* Number of lines in the page */
        int numcols;     /* Number of columns in a row */
        int numpasses;   /* Number of passes used to print one stripe */
        int bidirprint;  /* Bidirectional printing enabled ? */
        int select;      /* Resolution selector */
        int modelprint;  /* which printer? - lxm3200=0, z12=1, z31=2 */
        int z31margin;   /* margin for the Z31 */

        /* Printing offsets */
        int leftoffset;  /* Start printing offset from left margin */
        int topoffset;   /* Start printing offset from top margin */

        /* Resolution settings */
        int xres;        /* Horizontal dots per inch */
        int yres;        /* Vertical dots per inch */
        int xrmul;       /* Horizontal coordinate multiplier */
        int yrmul;       /* Vertical coordinate multiplier */

        /* Pagewide status */
        int curheadpos;  /* Current absolute printhead position */
        int linetoeject; /* Number of lines for the eject command */
        int direction;   /* Printing direction for next stripe */

        /* Alignment data */
        int bwsep;     /* Nozzle columns separation in B&W/photo cartridge */
        int colsep;    /* Nozzle columns separation in color cartridge */
        int vertalign; /* Vertical alignment offset of the two cartridges */
        int lrhalign;  /* Horizontal alignment between left and right cartridges */

        /* Data pointers */
        byte *outdata;    /* Buffer to output data codes for one full stripe */
        byte *scanbuf;    /* Buffer to contain the rasterized scanlines */
        gp_file *stream;     /* Output stream */
        lxm_device *dev;  /* Pointer to our device */

        /* Buffer data */
        int left, right;  /* Actual left and right margins */
        int firstline;    /* Head of the circular scanline buffer */
        int lastblack;    /* Line of last black pass rendered in a color print */
        int curvline;     /* Current vertical position */

        /* Stripe related data */
        byte header[24];  /* Stripe header data */
        int  fullflag;    /* A stripe is ready to be output */
        int  stripebytes; /* Number of bytes in a stripe */
        int  ileave;      /* Interleaving pass: 0=even lines, 1=odd lines */

} pagedata;

/* Prototypes for public routines */
static dev_proc_map_rgb_color(lxm3200_map_rgb_color);
static dev_proc_map_color_rgb(lxm3200_map_color_rgb);
static dev_proc_print_page(lxm3200_print_page);
static dev_proc_get_params(lxm3200_get_params);
static dev_proc_put_params(lxm3200_put_params);
static dev_proc_open_device(lxm3200_open);

/* Prototypes for internal routines */
static void freeresources(lxm_device *pdev);
static byte calccheck8(byte *data);
static void outputepilogue(pagedata *gendata);
static void skiplines(pagedata *gendata, int skipcol, int skipin);
static void fillheader(pagedata *gendata, int head, int numcol, int firstcol, int bytes);
static void finalizeheader(pagedata *gendata, int vskip, int newhead);
static void convbuf(pagedata *gendata, int head, int numcols, int firstcol);
static void encode_bw_buf(pagedata *gendata);
static void encode_col_buf(pagedata *gendata, int head);
static int fill_mono_buffer(pagedata *gendata, int vline);
static int init_buffer(pagedata *gendata);
static int qualify_buffer(pagedata *gendata);
static int roll_buffer(pagedata *gendata);
static void calclinemargins(pagedata *gendata, byte *data, int mask, int *left, int *right);
static void calcbufmargins(pagedata *gendata,int head);
static int print_color_page(pagedata *gendata);
static void print_mono_page(pagedata *gendata);
static int print_photo_page(pagedata *gendata);

/* Codes for the color indexes. */
#define WHITE        0x00  /* Pure white */
#define MAGENTA      0x01  /* Standard magenta */
#define CYAN         0x02  /* Standard cyan */
#define YELLOW       0x04  /* Standard yellow */
#define LIGHTCYAN    0x10  /* Light cyan (photo mode) */
#define LIGHTMAGENTA 0x20  /* Light magenta (photo mode) */
#define BLACK        0x40  /* Pure black */

/* Modes for rendering: used by the common procedures to
 * discriminate from mono to color and photo modes.
 */
#define LXM3200_M  0  /* Monochrome mode */
#define LXM3200_C  1  /* Standard color mode */
#define LXM3200_P  2  /* Photo color mode */

/* Initial horizontal position for the printheads,
 * in 1200ths of an inch. Note that "left" and "right"
 * head here refers to paper margin, and so looking at
 * them from the front of printer they will appear reversed.
 */

/* Left head (B&W/photo) start position */
#define LHSTART (gendata->leftoffset+6254)
/* added for Lexmark Z12 28.09.2002 */
#define LHSTART_z12 (gendata->leftoffset+5000)

/* Right head (color) start position. This is relative to
 * LHSTART so we only need to change one parameter to adjust
 * the head starting position. In the case of the Lexmark Z12
 * we have only one cartridge: black or color, so
 * LHSTART_Z12 = RHSTART_Z12
 */
#define RHSTART (LHSTART-2120)
#define RHSTART_z12 (LHSTART_z12) /* added for Lexmark Z12 28.9.2002 */

/* Difference in starting position between left-to-right
 * and right-to-left passes, in 1200ths of an inch.
 * Obviously only used in bidirectional mode.
 */
#define LRPASSHOFS 62

/* Initial vertical position of the printheads,
 * in 1200ths of an inch.
 */
#define BWTOPSTART  (gendata->topoffset+420)
#define COLTOPSTART (gendata->topoffset+476)

/* Base alignment offset between the color cartridge
 * and the B&W cartridge in 192 nozzles mode.
 */
#define COLORVALIGN_V  8
#define BLACKVALIGN_V  (gendata->vertalign+30)
#define PHOTOVALIGN_V  (gendata->vertalign)

/* Values used to index the vertical aligment array */
#define COLORVALIGN  0
#define BLACKVALIGN  1
#define PHOTOVALIGN  2

/* Offset of color pens from first row, in 1/600ths of an inch.
 * Pen 0 is the topmost and is the CYAN or LIGHTCYAN pen (depending
 * on the cartridge: standard color or photo). Pen 1 is the middle
 * one, which carries MAGENTA or LIGHTMAGENTA color. Pen 2 is the
 * bottom one, which is YELLOW or BLACK.
 */
#define PEN0OFS  0
#define PEN1OFS  92
#define PEN2OFS  184

/* Number of nozzles in each pen type */
#define COLORPEN 64   /* Each color pen of a color/photo cartridge */
#define BWCOLPEN 192  /* Black cartridge used in color or 1200dpi modes */
#define BWSTDPEN 208  /* Black cartridge used in mono non-1200dpi mode */

/* Values used by the color mapping routines */
#define HALFTONE (gx_max_color_value/2)
#define FULLTONE (gx_max_color_value)
#define ONETHIRD (FULLTONE/3)
#define TWOTHIRD ((2*FULLTONE)/3)

/* Printer head and printing direction selectors */
#define LEFT   0 /* Left head (B/W or photo) or left-to-right direction */
#define RIGHT  1 /* Right head (colour) or right-to-left direction */

/* Qualificators for the scan buffer */
#define LAST   0x01 /* The buffer is the last on the page */
#define LHDATA 0x02 /* The buffer contains data for the left head */
#define RHDATA 0x04 /* The buffer contains data for the right head */

/* Printer's margins, in inches. The Lexmark 3200 has two settings
 * for the side margins: one is used with A4-sized paper and one
 * (here called conventionally "LETTER") is used for all other paper
 * sizes. Envelopes have different margins as well, but under ghostscript
 * it's quite hard to know, from inside a printer driver, if we are
 * printing on envelopes or on standard paper, so we just ignore that.
 */
#define LXM3200_TOP_MARGIN           0.070f
#define LXM3200_BOTTOM_MARGIN        0.200f
#define LXM3200_A4_LEFT_MARGIN       0.135f
#define LXM3200_LETTER_LEFT_MARGIN   0.250f
#define LXM3200_A4_RIGHT_MARGIN      0.135f
#define LXM3200_LETTER_RIGHT_MARGIN  0.250f

/* Offsets for the top and bootom start of the printing frame. */
#define LXM3200_A4_TOPOFFSET       84
#define LXM3200_A4_LEFTOFFSET      162
#define LXM3200_LETTER_TOPOFFSET   84
#define LXM3200_LETTER_LEFTOFFSET  300

/*
 * ------ The device descriptor ------
 */

/* Device procedures */
static void
lxm3200_initialize_device_procs(gx_device *dev)
{
    gdev_prn_initialize_device_procs(dev);

    set_dev_proc(dev, open_device, lxm3200_open);
    set_dev_proc(dev, map_rgb_color, lxm3200_map_rgb_color);
    set_dev_proc(dev, map_color_rgb, lxm3200_map_color_rgb);
    set_dev_proc(dev, get_params, lxm3200_get_params);
    set_dev_proc(dev, put_params, lxm3200_put_params);
    set_dev_proc(dev, map_cmyk_color, gx_error_encode_color);
    set_dev_proc(dev, encode_color, lxm3200_map_rgb_color);
    set_dev_proc(dev, decode_color, lxm3200_map_color_rgb);
}

/* Define an extension (subclass) of gx_device_printer. */
struct lxm_device_s
{
        gx_device_common;
        gx_prn_device_common;
        int rendermode;  /* Rendering mode (BW, CMYK, CcMmYK) */
        int algnA; /* Horizontal alignment between left and right cartridges */
        int algnB; /* Vertical alignment between left and right cartridges */
        int algnC; /* Nozzle column separation of left cartridge */
        int algnD; /* Nozzle column separation of right cartridge */
        int bidir;   /* Bidirectional printing active ? */
        int numpass; /* Number of head passes for each stripe */
        int leftoffset; /* Offset of first column from left side of paper */
        int topoffset;  /* Offset of first row from top of paper */
        int model; /* Parameter to choose the model - lxm3200=0, z12=1, z31=2 */
        int z31m; /* Alignment parameter for the Z31 */

	/* Lookup table for pen position offsets of color/photo cartridges.
         * Parameter is the pen number, as defined by the pen offsets above:
         * pen 0 is CYAN/LIGHTCYAN, pen 1 is MAGENTA/LIGHTMAGENTA, pen 2 is
         * YELLOW/BLACK. This is used to properly take account the position
         * of each color pen relative to the vertical position of the
         * color/photo cartridge. */
        int penofs[3];

        /* Lookup table for vertical alignment of the cartridges relative to
         * each other. Parameter is the cartridge type: 0 = color cartridge,
         * 1 = black cartridge in color mode, 2 = photo cartridge.
         * Black cartridge in monochromatic mode is always aligned at 0
         * because in that mode we print with only one cartridge so there can
         * be no alignment problems (a single cartridge is always aligned
         * with itself, otherwise the printer tray is faulty). */
        int valign[3];

        /* Lookup table for horizontal offsets. First parameter is the
         * head, second parameter the printing direction. */
        int hoffset[2][2];

	/* formerly globals */
        pagedata data;
};

/* Device definition: Lexmark 3200 */
lxm_device far_data gs_lxm3200_device =
{
        prn_device_body(lxm_device,
                lxm3200_initialize_device_procs,
                "lxm3200",
                DEFAULT_WIDTH_10THS,
                DEFAULT_HEIGHT_10THS,
                600, /* default x dpi */
                600, /* default y dpi */
                0.0, /* left margin, inches (filled-in later) */
                0.0, /* bottom margin, inches (filled-in later) */
                0.0, /* right margin, inches (filled-in later) */
                0.0, /* top margin, inches (filled-in later) */
                1,   /* number of color components (mono) */
                8,   /* bits per pixel */
                1,   /* number of gray levels-1: B&W only */
                0,   /* number of color levels-1: no color */
                2,   /* dither gray: maximum 2 distinct gray levels */
                0,   /* dither rgb: no RGB dithering in this mode */
                lxm3200_print_page),
        LXM3200_C,      /* default printing mode */
        16, 8, 16, 16,  /* default aligment parameters value */
        0, 1,           /* default bidirectional and numpasses value */
        0, 0,           /* left and top offsets (filled-in later) */
        0,     /* default model = Lexmark 3200 */
        100   /* default z31m */
};

/* --------- Static data --------- */

/* Lookup tables to speed up bitwise operations */
static byte bits[8] = { 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01 };
static byte ibits[8] = { 0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0xfe };

/* Lookup table for masking color pens in color/photo cartridges.
 * This is used to check the raster buffer for the presence of a
 * particular color in the pixel we are encoding.
 * The first index is the head (LEFT or RIGHT) which is used to
 * distinguish between photo and color cartridges. The second index
 * is the pen number (0 is the upper pen, 1 the middle pen, 2 the
 * lower pen) on that cartridge.
 */
static byte colmask[2][3] =
{
        { LIGHTCYAN, LIGHTMAGENTA, BLACK},
        { CYAN, MAGENTA, YELLOW }
};

/* Initialization sequence needed at the beginning of the data stream.
 * This is invariant and contains a reset sequence, meaning each single
 * page in a multiple page output is sent to the printer as an independent
 * print job.
 */
static byte init_sequence[] =
{
        0x1b, 0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
        0x1b, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33,
        0x1b, 0x30, 0x80, 0x0C, 0x02, 0x00, 0x00, 0xbe,
        0x1b, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21
};

static byte z12_init_sequence[] =
{
        0x1b, 0x2a, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
        0x1b, 0x33, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33,
        0x1b, 0x63, 0x00, 0x01, 0x40, 0x02, 0x0d, 0xb3,
        0x1b, 0x30, 0x80, 0x0c, 0x01, 0x00, 0x00, 0xbd,
        0x1b, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21
};

/* --------- Interface routines --------- */

/* Function called by ghostscript to open the
 * printer device. We set the margins and offsets
 * here. Note that to guess which paper is loaded
 * into the printer, we calculate the line width
 * and then anything between 8.25 and 8.4 inches
 * is considered to be A4.
 * This routine is inspired by the omologous
 * routine from the "gdevbj10" driver.
 */
static int
lxm3200_open(gx_device *pdev)
{
        float linewidth;

        static const float a4_margins[4] =
        {
                LXM3200_A4_LEFT_MARGIN, LXM3200_BOTTOM_MARGIN,
                LXM3200_A4_RIGHT_MARGIN, LXM3200_TOP_MARGIN
        };

        static const float letter_margins[4] =
        {
                LXM3200_LETTER_LEFT_MARGIN, LXM3200_BOTTOM_MARGIN,
                LXM3200_LETTER_RIGHT_MARGIN, LXM3200_TOP_MARGIN
        };

        linewidth = (float)(pdev->width) / (float)(pdev->x_pixels_per_inch);

        if(linewidth >= 8.25 && linewidth <= 8.4)
        {
                gx_device_set_margins(pdev, a4_margins, true);
                ((lxm_device *)pdev)->topoffset = LXM3200_A4_TOPOFFSET;
                ((lxm_device *)pdev)->leftoffset = LXM3200_A4_LEFTOFFSET;
        }
        else
        {
                gx_device_set_margins(pdev, letter_margins, true);
                ((lxm_device *)pdev)->topoffset = LXM3200_LETTER_TOPOFFSET;
                ((lxm_device *)pdev)->leftoffset = LXM3200_LETTER_LEFTOFFSET;
        }

        return gdev_prn_open(pdev);
}

/* Function used by ghostscript to map a RGB
 * value to the driver's internal representation
 * of the nearest color.
 */
static gx_color_index
lxm3200_map_rgb_color(gx_device *dev, const gx_color_value cv[])
{
        gx_color_index col;
        gx_color_value r, g, b;
        int c, m, y;
        gx_color_value tmpcv[3];

        r = cv[0]; g = cv[1]; b = cv[2];
        /* In case R, G and B values are equal, ghostscript
         * prescribes that the color value must be turned
         * into a gray shade. In our case this means either
         * black or white
         */
        if(r == g && r == b)
        {
                if(r > HALFTONE)
                        return(WHITE);
                else
                        return(BLACK);
        }

        /* Calculate CMY values from RGB. This is *overly*
         * simple, but it's enough to print something.
         */
        c = FULLTONE - r;
        m = FULLTONE - g;
        y = FULLTONE - b;

        /* Now encode the calculated color into the internal
         * format. This means simply to turn on or off the
         * bits representing each color depending on the value
         * of the appropriate CMY component.
         * Note that we are not doing black separation or any
         * other fancy stuff: this is spartane code just to
         * make the printer work.
         */
        col = 0;
        if(y > HALFTONE)col |= YELLOW;

        switch(((lxm_device *)dev)->rendermode)
        {
                case LXM3200_C:
                        if(c > HALFTONE)col |= CYAN;
                        if(m > HALFTONE)col |= MAGENTA;
                        break;

                case LXM3200_P:
                        if(c > TWOTHIRD)
                                col |= CYAN;
                        else
                                if(c > ONETHIRD)col |= LIGHTCYAN;

                        if(m > TWOTHIRD)
                                col |= MAGENTA;
                        else
                                if(m > ONETHIRD)col |= LIGHTMAGENTA;
                        break;

                default:
                        tmpcv[0] = r; tmpcv[1] = g; tmpcv[2] = b;
                        col = gdev_prn_map_rgb_color(dev, tmpcv);
                        break;
        }

        return(col);
}

/* Function called by ghostscript to map the
 * internal representation of a color to a
 * RGB value.
 */
static int
lxm3200_map_color_rgb(gx_device *dev, gx_color_index color,
                                                                                        gx_color_value prgb[3])
{
        int c, m, y;

        if(color == WHITE)
        {
                prgb[0] = FULLTONE;
                prgb[1] = FULLTONE;
                prgb[2] = FULLTONE;
                return(0);
        }

        if(color & BLACK)
        {
                prgb[0] = 0;
                prgb[1] = 0;
                prgb[2] = 0;
                return(0);
        }

        /* Calculate back CMY components from the internal
         * representation of the color
         */
        c = 0;
        m = 0;
        y = 0;

        switch(((lxm_device *)dev)->rendermode)
        {
                case LXM3200_C:
                        color &= (CYAN|MAGENTA|YELLOW);
                        if(color & CYAN)c = 2;
                        if(color & MAGENTA)m = 2;
                        if(color & YELLOW)y = 2;
                        break;

                case LXM3200_P:
                default:
                        color &= (CYAN|MAGENTA|YELLOW|LIGHTCYAN|LIGHTMAGENTA);
                        if(color & LIGHTCYAN)c = 1;
                        if(color & LIGHTMAGENTA)m = 1;
                        if(color & YELLOW)y = 2;
                        if(color & CYAN)c = 2;
                        if(color & MAGENTA)m = 2;
                        break;
        }

        /* And now turn CMY to RGB, in the usual spartane way */

        prgb[0] = (gx_color_value)((2 - c) * HALFTONE);
        prgb[1] = (gx_color_value)((2 - m) * HALFTONE);
        prgb[2] = (gx_color_value)((2 - y) * HALFTONE);

        return(0);
}

/* Main routine of the driver. This takes care of
 * all parameters and static data initialization
 * and calls the proper page printing routines
 * depending on the selected printing mode.
 */
static int
lxm3200_print_page(gx_device_printer *pdev, gp_file *prn_stream)
{
	int code = 0;
	lxm_device *dev = (lxm_device *)pdev;
	pagedata *gendata;

	gendata = &dev->data;

        /* Store data passed by ghostscript to the driver */
        gendata->dev = dev;
        gendata->stream = prn_stream;
        gendata->rendermode = (gendata->dev)->rendermode;

        /* Snap resolution on one of the three supported setting
         * (300, 600, 1200 dpi) depending on the input resoution value.
         * Horizontal and vertical resolution are treated independently.
   */
        gendata->xres = 600;
        if((gendata->dev)->x_pixels_per_inch < 450)gendata->xres = 300;
        if((gendata->dev)->x_pixels_per_inch > 900)gendata->xres = 1200;
        gendata->xrmul = 1200 / gendata->xres;

        gendata->yres = 600;
        if((gendata->dev)->y_pixels_per_inch < 450)gendata->yres = 300;
        if((gendata->dev)->y_pixels_per_inch > 900)gendata->yres = 1200;
        gendata->yrmul = 1200 / gendata->yres;

        /* Cache horizontal and vertical starting offsets */
        gendata->topoffset = (gendata->dev)->topoffset;
        gendata->leftoffset = (gendata->dev)->leftoffset;

        /* Build lookup table for pen offset, adjusting for
         * vertical resolution setting
         */
        dev->penofs[0] = (PEN0OFS * 2) / gendata->yrmul;
        dev->penofs[1] = (PEN1OFS * 2) / gendata->yrmul;
        dev->penofs[2] = (PEN2OFS * 2) / gendata->yrmul;

        /* Build lookup table for vertical heads alignment,
         * adjusting for vertical resolution setting
         */
        dev->valign[COLORVALIGN] = (COLORVALIGN_V * 2) / gendata->yrmul;
        dev->valign[BLACKVALIGN] = (BLACKVALIGN_V * 2) / gendata->yrmul;
        dev->valign[PHOTOVALIGN] = (PHOTOVALIGN_V * 2) / gendata->yrmul;

        /* Build lookup tables for initial horizontal offsets,
         * adjusting for horizontal resolution setting
         */
         /* choose whether to use lxm3200 or Z12 settings */
      gendata->modelprint=(gendata->dev)->model; /* which model? */
      gendata->z31margin=(gendata->dev)->z31m; /*which additional margin for z31*/
      switch(gendata->modelprint){
      case 1:  /* we use the Lexmark Z12 */
          dev->hoffset[LEFT][LEFT] = LHSTART_z12;
          dev->hoffset[RIGHT][LEFT] = RHSTART_z12 + gendata->lrhalign;
          break;
      default: /* default (if one uses the Lexmark 3200 or the Lexmark Z31) */
          dev->hoffset[LEFT][LEFT] = LHSTART;
          dev->hoffset[RIGHT][LEFT] = RHSTART + gendata->lrhalign;
          break;
      }
      dev->hoffset[LEFT][RIGHT] = dev->hoffset[LEFT][LEFT] - LRPASSHOFS;
      dev->hoffset[RIGHT][RIGHT] = dev->hoffset[RIGHT][LEFT] - LRPASSHOFS;

        /* Initialization of general parameters */
        gendata->outdata = NULL;
        gendata->scanbuf = NULL;
        gendata->curheadpos = 0;
        gendata->left = 0;
        gendata->right = 0;
        gendata->lastblack = 0;
        gendata->curvline = 0;
        gendata->firstline = 0;
        gendata->fullflag = FALSE;
        gendata->direction = LEFT;
        gendata->ileave = 0;

        gendata->bidirprint = (gendata->dev)->bidir;
        gendata->numpasses = (gendata->dev)->numpass;

        /* Set some parameters that depend on resolution and
         * printing mode. We calculate all at 600dpi (the native
         * resolution) and then correct later for different
         * resolution settings.
         */
        switch(gendata->rendermode)
        {
                /* In monochrome mode we try to use all 208 nozzles of
                 * the black cartridge to speed up printing. But if we
                 * are printing at 1200 dpi horizontal, only 192 nozzles
                 * are available anyway (it seems an hardware limitation).
                 * We print a full buffer at every pass, so the number of
                 * lines in the buffer is the same as the number of nozzles
                 * of the head.
                 */
                case LXM3200_M:
                        gendata->numblines = 208;
                        gendata->numlines = 208;
                        gendata->select = 0x10;
                        if(gendata->xres == 1200)
                        {
                                gendata->numblines = 192;
                                gendata->numlines = 192;
                                gendata->select = 0x00;
                        }
                        break;

                /* In color or photo mode we must use 192 nozzles only in
                 * the black cartridge, to cope with the color and photo
                 * cartridges (which have 3 color pen of 64 nozzles each,
                 * for a total of 192 nozzles). But the color pens are
                 * vertically spaced and misaligned with respect to the
                 * black pen. To solve this problem, we need a buffer which
                 * is larger than 192 lines and then we print only the
                 * proper "windows" from it. We choose to set the buffer
                 * height to 256, which is the smallest power of two large
                 * enough to hold all the needed data. We use a power of
                 * two for speed, since in this way the modulo operation
                 * in the inner loops (needed to take care of buffer rolling)
                 * becomes a simple and much faster bitwise AND.
                 */
                case LXM3200_P:
                case LXM3200_C:
                        gendata->numblines = 256;
                        gendata->numlines = 192;
                        gendata->select = 0x00;
                        break;
        }

        /* Correct the number of lines of the buffer to take care
         * of different vertical resolution modes. Since the buffer
         * does cover a constant vertical spacing, we must double the
         * number of lines at 1200dpi and half it at 300dpi, to take
         * into account the different thickness of the lines at the
         * three different vertical resolutions.
         */
        gendata->numblines = (gendata->numblines * 2) / gendata->yrmul;

        /* Now correct the "select" field to adjust the horizontal
         * motor speed depending on position. Meanwhile, if we are
         * at 1200 dpi, double the number of horizontal passes
         * because each stripe at 1200 dpi horizontal must be printed
         * in two passes.
         */
        switch(gendata->xres)
        {
                case 300:
                        gendata->select |= 0x60;
                        break;

                case 1200:
                        gendata->select |= 0x40;
                        gendata->numpasses *= 2;
                        break;
        }

        /* Now store some useful info taken from the ghostscript
         * device structure to speed up access.
         */
        gendata->numcols = (gendata->dev)->width;
        gendata->numvlines = (gendata->dev)->height;
        gendata->lrhalign = (gendata->dev)->algnA;
        gendata->vertalign = (gendata->dev)->algnB;
        gendata->bwsep = (gendata->dev)->algnC;
        gendata->colsep = (gendata->dev)->algnD;
        gendata->goffset = (max(gendata->bwsep, gendata->colsep) * 2) / gendata->xrmul;
        gendata->numbytes = gendata->numcols + (2 * gendata->goffset);
        gendata->numrbytes = gdev_mem_bytes_per_scan_line(gendata->dev);

        /* Calculate number of lines in the page and initialize the
         * counter of the lines to eject. At the end of the printing,
         * to eject the paper sheet we must send to the printer a
         * command to move the paper forward. The amount to move is
         * the length of paper which is still inside the printer plus
         * two inches (the number is expressed in 1200ths of an inch,
         * so "plus two inches" means "add 2400").
         */
        gendata->linetoeject = gendata->numvlines * gendata->yrmul;
        gendata->linetoeject += 2400;

        /* Allocate memory for the buffers and
         * verify that the allocation was done properly.
         */
        gendata->scanbuf = (byte *)gs_malloc(pdev->memory->non_gc_memory, gendata->numbytes, gendata->numblines,
                                                                                                                                                        "lxm3200_print_page(scanbuf)");

        gendata->outdata = (byte *)gs_malloc(pdev->memory->non_gc_memory, gendata->numbytes, 30,
                                                                                                                                                        "lxm3200_print_page(outdata)");

        if(gendata->scanbuf == NULL ||
                 gendata->outdata == NULL)
        {
                freeresources(dev);
                return_error(gs_error_VMerror);
        }

        /* Send initialization sequence to the printer */
        if(gendata->modelprint==1) gp_fwrite(z12_init_sequence, sizeof(z12_init_sequence), 1, prn_stream);
        else gp_fwrite(init_sequence, sizeof(init_sequence), 1, prn_stream);

        /* Choose the right page printing routine
         * depending on the printing mode.
         */
        switch(gendata->rendermode)
        {
                case LXM3200_P:
                        code = print_photo_page(gendata);
                        if (code < 0)   goto end;
                        break;

                case LXM3200_C:
                        code = print_color_page(gendata);
                        if (code < 0)   goto end;
                        break;

                case LXM3200_M:
                default:
                        print_mono_page(gendata);
                        break;
        }

        /* Output the end-of-page epilogue */
        outputepilogue(gendata);

        end:

        /* Free the allocated resources */
        freeresources(dev);

        /* Done. Bye bye, see you on next page. */
        return code;
}

/* Function that Ghostscript calls to ask the driver
 * the value of its parameters. This function is based
 * on the equivalent from the HP850 driver (gdevcd8.c)
 * by Uli Wortmann.
 * I won't comment it because I haven't even tried
 * to understand this code... :)
 */
static int
lxm3200_get_params(gx_device *pdev, gs_param_list *plist)
{
  int code;

  code = gdev_prn_get_params(pdev, plist);

  if(code < 0)return(code);

        code = param_write_int(plist, "algnA", &((lxm_device *)pdev)->algnA);
        if(code < 0)return(code);

        code = param_write_int(plist, "algnB", &((lxm_device *)pdev)->algnB);
        if(code < 0)return(code);

        code = param_write_int(plist, "algnC", &((lxm_device *)pdev)->algnC);
        if(code < 0)return(code);

        code = param_write_int(plist, "algnD", &((lxm_device *)pdev)->algnD);
        if(code < 0)return(code);

        code = param_write_int(plist, "bidir", &((lxm_device *)pdev)->bidir);
        if(code < 0)return(code);

        code = param_write_int(plist, "numpass", &((lxm_device *)pdev)->numpass);
        if(code < 0)return(code);

        code = param_write_int(plist, "mode", &((lxm_device *)pdev)->rendermode);
        if(code < 0)return(code);

        code = param_write_int(plist, "model", &((lxm_device *)pdev)->model);
        if(code < 0)return(code);

        code = param_write_int(plist, "z31m", &((lxm_device *)pdev)->z31m);

  return code;
}

/* Function that Ghostscript calls to let the driver
 * set the value of its parameters. This function is
 * based on the equivalent from the HP850 driver
 * (gdevcd8.c) by Uli Wortmann.
 * I won't comment it because I haven't even tried
 * to understand this code... :)
 */
static int
lxm3200_put_params(gx_device *pdev, gs_param_list *plist)
{
  int algnA = ((lxm_device *)pdev)->algnA;
  int algnB = ((lxm_device *)pdev)->algnB;
  int algnC = ((lxm_device *)pdev)->algnC;
  int algnD = ((lxm_device *)pdev)->algnD;
  int bidir = ((lxm_device *)pdev)->bidir;
  int numpass = ((lxm_device *)pdev)->numpass;
  int mode = ((lxm_device *)pdev)->rendermode;
  int code = 0;
  int model = ((lxm_device *)pdev)->model; /* for model selection */
  int z31m = ((lxm_device *)pdev)->z31m; /* additional margin for the z31 */

  code = param_read_int(plist, "algnA", &algnA);
        if(code < 0)return(code);
        if(algnA < 0 || algnA > 30)
                param_signal_error(plist, "algnA", gs_error_rangecheck);

  code = param_read_int(plist, "algnB", &algnB);
        if(code < 0)return(code);
        if(algnB < 0 || algnB > 15)
                param_signal_error(plist, "algnB", gs_error_rangecheck);

  code = param_read_int(plist, "algnC", &algnC);
        if(code < 0)return(code);
        if(algnC < 0 || algnC > 30)
                param_signal_error(plist, "algnC", gs_error_rangecheck);

  code = param_read_int(plist, "algnD", &algnD);
        if(code < 0)return(code);
        if(algnD < 0 || algnD > 30)
                param_signal_error(plist, "algnD", gs_error_rangecheck);

  code = param_read_int(plist, "bidir", &bidir);
        if(code < 0)return(code);
        if(bidir != 0 && bidir != 1)
                param_signal_error(plist, "bidir", gs_error_rangecheck);

  code = param_read_int(plist, "numpass", &numpass);
        if(code < 0)return(code);
        if(numpass < 1 || numpass > 16)
                param_signal_error(plist, "numpass", gs_error_rangecheck);

  code = param_read_int(plist, "mode", &mode);
        if(code < 0)return(code);
        if(mode != LXM3200_M && mode != LXM3200_C && mode != LXM3200_P)
                param_signal_error(plist, "mode", gs_error_rangecheck);

   code = param_read_int(plist, "model", &model); /* asking for the model of printer: lxm3200 , Z12, Z31 */
        if(code < 0)return(code);
        if(model < 0 || model > 2 )
                param_signal_error(plist, "model", gs_error_rangecheck);

   code = param_read_int(plist, "z31m", &z31m); /* What additional margin for the Z31 */
        if(code < 0)return(code);

  ((lxm_device *)pdev)->algnA = algnA;
  ((lxm_device *)pdev)->algnB = algnB;
  ((lxm_device *)pdev)->algnC = algnC;
  ((lxm_device *)pdev)->algnD = algnD;
  ((lxm_device *)pdev)->bidir = bidir;
  ((lxm_device *)pdev)->numpass = numpass;
  ((lxm_device *)pdev)->rendermode = mode;
  ((lxm_device *)pdev)->model = model; /* Model selection: lxm3200, Z12, Z31. */
  ((lxm_device *)pdev)->z31m = z31m;  /* Additional margin for the Z31 */

    /* Depending on the selected rendering mode, change the
    * driver's parameters that ghostscript needs for the
    * dithering. We need to do it here because the "get_params"
    * and "put_params" are the only routines in the driver that
    * ghostscript calls before using the dithering parameters.
    */
    {
      int old_num = pdev->color_info.num_components;

      switch (mode)
      {
      case LXM3200_M:
          pdev->color_info.num_components = 1;
          pdev->color_info.max_gray = 1;
          pdev->color_info.max_color = 0;
          pdev->color_info.dither_grays = 2;
          pdev->color_info.dither_colors = 0;
          break;

      case LXM3200_C:
          pdev->color_info.num_components = 3;
          pdev->color_info.max_gray = 1;
          pdev->color_info.max_color = 1;
          pdev->color_info.dither_grays = 2;
          pdev->color_info.dither_colors = 2;
          break;

      case LXM3200_P:
          pdev->color_info.num_components = 3;
          pdev->color_info.max_gray = 1;
          pdev->color_info.max_color = 2;
          pdev->color_info.dither_grays = 2;
          pdev->color_info.dither_colors = 3;
          break;
      }
      /* The above is horrid.  But, if we change the color model
         the ICC profile needs to change too.  Blow away the
         current structure.  A new one will be built when we
         go to gdev_prn_put_params. */
      if (old_num != pdev->color_info.num_components) {
          rc_decrement(pdev->icc_struct, "lxm3200_put_params");
          pdev->icc_struct = NULL;
      }
    }

    code = gdev_prn_put_params(pdev, plist);

    return code;
}

/* --------- Internal routines --------- */

/* Free the resources allocated by the driver */
static void
freeresources(lxm_device *dev)
{
	pagedata *gendata = &dev->data;

        if(gendata->scanbuf)
                gs_free(dev->memory->non_gc_memory, (char *)gendata->scanbuf, gendata->numbytes, gendata->numblines,
                                                "lxm3200:freeresources(scanbuf)");

        if(gendata->outdata)
                gs_free(dev->memory->non_gc_memory, (char *)gendata->outdata, gendata->numbytes, 30,
                                                "lxm3200:freeresources(outdata)");
}

/* Calculate the checksum of an escape sequence.
 * It is defined as the sum modulo 256 of the
 * six bytes following the escape character.
 *
 * data: pointer to the first of the 8 characters
 *       of an escape sequence.
 */
static byte
calccheck8(byte *data)
{
        int ck, i;

        ck = 0;
        for(i=1; i<7; i++)ck += data[i];

        return(ck);
}

/* Output the page epilogue. This procedure outputs
 * the escape sequence needed to eject the page and
 * take the printheads to the "park" position.
 */
static void
outputepilogue(pagedata *gendata)
{
        byte trailer[24];
        int pos;

        /* Page eject sequence */
        trailer[0] = 0x1b;
        trailer[1] = 0x22;
        trailer[2] = 0x80;
        trailer[3] = gendata->linetoeject >> 8;
        trailer[4] = gendata->linetoeject & 0xff;
        trailer[5] = 0x00;
        trailer[6] = 0x00;
        trailer[7] = calccheck8(trailer);

        /* Calculate the value we need to take the head back
         * to the park position. This is the current head position
         * if we printed the last stripe left-to-right, and the
         * current head position minus 168 (0xa8) if we printed the
         * last stripe right-to-left.
         */
        pos = gendata->curheadpos;
        if(gendata->bidirprint && gendata->direction == LEFT)pos -= 0xa8;
        if(pos < 0)pos = 0;

        /* Horizontal back sequence */
        trailer[8] = 0x1b;
        trailer[9] = 0x31;
        trailer[10] = 0x10;
        trailer[11] = pos >> 8;
        trailer[12] = pos & 0xff;
        trailer[13] = 0x00;
        trailer[14] = 0x00;
        trailer[15] = calccheck8(trailer+8);

        /* Reset sequence */
        trailer[16] = 0x1b;
        trailer[17] = 0x33;
        trailer[18] = 0x00;
        trailer[19] = 0x00;
        trailer[20] = 0x00;
        trailer[21] = 0x00;
        trailer[22] = 0x00;
        trailer[23] = 0x33;

        gp_fwrite(trailer, 8, 3, gendata->stream);
}

/* Output a "page forward" escape sequence,
 * needed to move the paper forward some lines.
 *
 * skiprow: number of buffer lines to skip
 * vskip  : fixed offset, in 1200ths of an inch
 */
static void
skiplines(pagedata *gendata, int skiprow, int skipin)
{
        byte escape[8];
        int vskip;

        /* The vertical skip command accepts a spacing expressed in
         * 1200ths of an inch, so we must convert lines to 1200ths
         * of an inch. After the conversion we sum an offset directly
         * expressed in 1200ths of an inch: this way we can use this
         * routine to skip both a certain amount of lines (which exact
         * spacing value depends on the vertical resolution) and a
         * fixed offset that we directly know in spacing units.
         */
        vskip = skiprow*gendata->yrmul + skipin;

        escape[0] = 0x1b;
        escape[1] = 0x23;
        escape[2] = 0x80;
        escape[3] = vskip >> 8;
        escape[4] = vskip & 0xff;
        escape[5] = 0x00;
        escape[6] = 0x00;
        escape[7] = calccheck8(escape);

        /* Adjust the number of lines still inside the printer */
        gendata->linetoeject -= vskip;

        gp_fwrite(escape, 8, 1, gendata->stream);
}

/* Fill a stripe header with data.
 *
 * head:     LEFT or RIGHT, chooses which head we are "feeding"
 * numcol:   number of data columns in this stripe, including blank ones
 * firstcol: position of the first column in the stripe (the *very first*,
 *           even if it's blank).
 * bytes:    total number of bytes in the stripe, including directories
 *           (but excluding the 24 bytes of the header).
 */
static void
fillheader(pagedata *gendata, int head, int numcol, int firstcol, int bytes)
{
        int len, offs1, startabs;
        int endabs, select, fwd;
        int back, nabspos;
        /* int sep;*/
        byte *header;

        header = gendata->header;

        /* Correct the measures: firstcol and len need to
         * be in 1200ths of an inch.
         */
        firstcol *= gendata->xrmul;
        len = numcol * gendata->xrmul;

        /* Alter select to choose direction */
        select = gendata->select | (gendata->direction == LEFT ? 0x01 : 0x00);

        /* Calculate the proper horizontal offset */
        offs1 = gendata->dev->hoffset[head][gendata->direction];

        /* Now calculate the correct separation depending on the
         * head type and adjust "select" to choose between left
         * or right head.
         */
        if(head == LEFT)
        {
                /* sep = (gendata->bwsep * 2) / gendata->xrmul;*/
        }
        else
        {
                /* sep = (gendata->colsep * 2) / gendata->xrmul; */
                select |= 0x80;
        }

        /* Now calculate absolute starting and ending positions
         * of this stripe, taking into account the printing direction
         */
        startabs = firstcol + offs1;

        if(gendata->direction == LEFT)
                endabs = startabs + len;
        else
                endabs = startabs - len;

        /* And now, basing on current head position,
         * transform the absolute coordinates in a
         * relative movement of the head.
         * The formulas used for this are "black magic",
         * since this is a part of the protocol which is
         * still not well known. What you see here is an
         * empyrical formula devised by examination and
         * parameter fitting on the data output by the
         * Windows driver.
         */
        if(gendata->direction == LEFT)
        {
                nabspos = (((endabs - 3600) >> 3) & 0xfff0) + 9;
                fwd = nabspos - gendata->curheadpos;
        }
        else
        {
                if(endabs > 4816)
                        nabspos = (((endabs - 4800) >> 3) & 0xfff0) + 9;
                else
                        nabspos = (((endabs - 3600) >> 3) & 0xfff0) + 9;
                fwd = gendata->curheadpos - nabspos;
        }

        gendata->curheadpos += (gendata->direction == LEFT ? fwd : -fwd);

        /* If we are printing unidirectionally, calculate
         * the backward movement to return the printing head
         * at the beginning of this stripe.
         */
        back = 0;
        if(gendata->bidirprint == FALSE)
        {
                if(startabs > 4816)
                        nabspos = ((startabs - 4800) >> 3) & 0xfff0;
                else
                        nabspos = ((startabs - 3600) >> 3) & 0xfff0;

                if(gendata->direction == LEFT)
                        back = gendata->curheadpos - nabspos;
                else
                        back = nabspos - gendata->curheadpos;
        }

        gendata->curheadpos -= (gendata->direction == LEFT ? back : -back);

        /* First part of the header */
        header[0] = 0x1b;
        header[1] = 0x40;
        header[2] = select;        /* Printing type flags */
        header[3] = numcol >> 8;   /* MSB of the number of columns to print */
        header[4] = numcol & 0xff; /* LSB of the number of columns to print */
        header[5] = fwd >> 8;      /* MSB of the relative forward head motion */
        header[6] = fwd & 0xff;    /* LSB of the relative forward head motion */
        header[7] = calccheck8(&header[0]);

        /* Second part of the header */
        header[8] = 0x1b;
        header[9] = 0x42;
        header[10] = 0x00;
        if(gendata->modelprint==1) header[10] = 0x10; /* Lexmark Z12 protocol */
        header[11] = back >> 8;  /* MSB of the relative backward head motion */
        header[12] = back & 0xff;  /* LSB of the relative backward head motion */
        header[13] = 0x00;  /* MSB of the relative downward head motion */
        header[14] = 0x00;  /* LSB of the relative downward head motion */
        header[15] = calccheck8(&header[8]);

        /* Third (and last) part of the header */
        header[16] = 0x1b;
        header[17] = 0x43;
        header[18] = (bytes >> 16) & 0xff;
        header[19] = (bytes >> 8) & 0xff;
        header[20] = bytes & 0xff;    /* LSB of the number of bytes in this stripe */
        header[21] = startabs >> 8;   /* MSB of the starting column of this stripe */
        header[22] = startabs & 0xff; /* LSB of the starting column of this stripe */
        header[23] = calccheck8(&header[16]);

        /* Signal to other routines that the output buffer
         * is full and how many bytes it is long.
         */
        gendata->stripebytes = bytes;
        gendata->fullflag = TRUE;

        /* If bidirectional printing is in effect, change
         * the printing direction for the next stripe
         */
        if(gendata->bidirprint)
                gendata->direction = (gendata->direction == LEFT ? RIGHT : LEFT);
}

/* Set final information in the header and output all
 * the data passes. This routine is needed because the
 * actual values of two fields of the header (final
 * head position and number of vertical lines to reach
 * the next stripe) depend on the next stripe and are
 * therefore unknown when "fillheader" is called.
 *
 * vskip  : number of lines to skip to reach next stripe
 * newhead: head used for the next stripe (LEFT or RIGHT)
 */
static void
finalizeheader(pagedata *gendata, int vskip, int newhead)
{
        int offs2, nstartabs, back, fwd;
        int habs, p, dir, endabs, col;
        int newstart, sep;
        byte *header;

        header = gendata->header;

        /* Check the printing direction this stripe
         * was originally intended for.
         */
        dir = (header[2] & 0x01 ? LEFT : RIGHT);

        /* Retrieve the horizontal offset for the next stripe. We don't do this
        if newhead is negative, because otherwise we would be out of bounds in
        gendata->dev->hoffset[]; offs2 isn't actually used in this case anyway.
        */
        if (newhead >= 0) {
            offs2 = gendata->dev->hoffset[newhead][gendata->direction];
        }

        /* Calculate the separation adjust in 1200ths of an inch */
        if(newhead == LEFT)
                sep = (gendata->bwsep * 2) / gendata->xrmul;
        else
                sep = (gendata->colsep * 2) / gendata->xrmul;

        /* Now calculate the correct starting column
         * of the next stripe
         */
        if(gendata->direction == LEFT)
                newstart = (gendata->left * gendata->xrmul) - sep;
        else
                newstart = (gendata->right * gendata->xrmul);

        vskip *= gendata->yrmul;

        /* Calculate absolute starting position of new stripe */
        if (newhead >= 0) {
            nstartabs = newstart + offs2;
        }

        /* Calculate absolute ending position of this stripe
         * by summing (with proper sign) the starting position
         * and the width.
         */
        endabs = header[21]*256 + header[22]; /* Starting position */
        col = (header[3]*256 + header[4]); /* Width in columns */
        col *= gendata->xrmul; /* Transformed in 1200ths of an inch */

        if(dir == LEFT)
                endabs += col; /* Printing left-to-right */
        else
                endabs -= col; /* Printing right-to-left */

        /* Correct head position neutralizing the effect
         * of the last issued head movement commands. The
         * head movement for this stripe needs to be
         * recalculated from scratch to take into account
         * the correct beginning position of the next stripe.
         */
        if(dir == LEFT)
        {
                gendata->curheadpos += header[11]*256 + header[12]; /* Back movement */
                gendata->curheadpos -= header[5]*256 + header[6];   /* Forward movement */
        }
        else
        {
                gendata->curheadpos -= header[11]*256 + header[12]; /* Back movement */
                gendata->curheadpos += header[5]*256 + header[6];   /* Forward movement */
        }

        /* We use a convention of passing a negative value for
         * "newhead" to mean that this is the last stripe of the
         * sheet, so we don't need to care for the next stripe.
         */
        if(newhead < 0)
        {
                /* Last stripe: we only need to calculate proper forward
                 * motion to print all the current stripe.
                 */
                fwd = ((header[5]*256 + header[6]) & 0xfff0) + 9;
        }
        else
        {
                /* This is not the last stripe, so we need to calculate
                 * the forward (in the printing direction) movement
                 * that will take the printing head at the end of the
                 * current stripe or at the beginning of the next,
                 * whichever is farther. Note that we are always
                 * talking relative to printing direction, so we must
                 * take into proper account if we are printing from left
                 * to right or from right to left.
                 */
                if(dir == LEFT)
                {
                        p = max(endabs, nstartabs);
                        habs = (((p - 3600) >> 3) & 0xfff0) + 9;
                        fwd = habs - gendata->curheadpos;

                        /* part for the Lexmark Z31!!! */
                        if(gendata->modelprint==2) fwd += gendata->z31margin;

                }
                else
                {
                        p = min(endabs, nstartabs);
                        if(p > 4816)
                                habs = (((p - 4800) >> 3) & 0xfff0);
                        else
                                habs = (((p - 3600) >> 3) & 0xfff0);
                        fwd = gendata->curheadpos - habs;
                }
        }

        /* Now update the current head position to take into
         * account the forward movement just computed
         */
        gendata->curheadpos += (dir == LEFT ? fwd : -fwd);

        /* Now calculate the value of the needed backward movement
         * to poisition the head correctly for the start of the
         * next stripe.
         */
        if(newhead < 0 || gendata->bidirprint)
        {
                /* If this is the last stripe of the page,
                 * there is no need to take back the head:
                 * it will be done by the parking command.
                 * Or if we are printing bidirectionally,
                 * the forward command has taken the head to
                 * the correct position, so no need to move it.
                 */
                back = 0;
        }
        else
        {
                /* Calculate the right backward movement basing
                 * on the start of the next stripe.
                 */
                if(nstartabs > 4856)
                        habs = ((nstartabs - 4840) >> 3) & 0xfff0;
                else
                        habs = ((nstartabs - 3600) >> 3) & 0xfff0;

                back = gendata->curheadpos - habs;

                /* If the next stripe starts at the right
                 * of this one, "back" will be too small or
                 * negative, so correct it.
                 * It appears that 16 is the minimum allowable
                 * backward movement that does not make the 3200
                 * misbehave in the next stripe. This does not hold
                 * if we are changing printing direction (in such a
                 * case backward movement may be zero). This means
                 * we are moving the head a little more than needed,
                 * but it seems unavoidable.
                 */
                if(back < 16)back = 16;
        }

  /* Lastly, update the current head position with the
         * backward movement just calculated.
         */
        gendata->curheadpos -= (dir == LEFT ? back : -back);

        /* Modify first part of the header */
        header[5] = fwd >> 8;
        header[6] = fwd & 0xff;
        header[7] = calccheck8(&header[0]);

        /* Modify second part of the header */
        header[8] = 0x1b;
        header[9] = 0x42;
        header[10] = 0x00;
        if(gendata->modelprint==1) header[10] = 0x10; /* Lexmark Z12 protocol */
        header[11] = back >> 8;    /* MSB of the relative backward head motion */
        header[12] = back & 0xff;  /* LSB of the relative backward head motion */
        header[13] = vskip >> 8;   /* MSB of the relative downward head motion */
        header[14] = vskip & 0xff; /* LSB of the relative downward head motion */
        header[15] = calccheck8(&header[8]);

        /* Now output the data, signalling that the output
         * buffer is now empty.
         */
        gp_fwrite(header, 3, 8, gendata->stream);
        gp_fwrite(gendata->outdata, gendata->stripebytes, 1, gendata->stream);
        gendata->fullflag = FALSE;
}

/* Convert a buffer data stream into
 * directory/data representation, using the
 * shortest coding (either direct or RLE)
 *
 * head    : head we are printing with (left or right).
 * numcols : number of columns in the buffer.
 * firstcol: first column to print.
 */
static void
convbuf(pagedata *gendata, int head, int numcols, int firstcol)
{
        byte *read, *write;
        int x, i, c, p, q, cnt, rle, std;
        int nby, ofs, dts0, dtr0, dtr1;
        int bytes;

        /* Initialize the pointers. We use the same buffer
         * for both input and output (we can do it because
         * the output data is at most as long as the input).
         * Note that the encode routines skipped 4 bytes at
         * each column to make room for the directory word.
         */
        read = gendata->outdata + 4;
        write = gendata->outdata;

        /* Set the parameters that will be used to create the directory and
         * to access the data. These parameters define the structure of the
         * directory word (32 bit) and depend on the number of nozzles that
         * are used. Note that the directory bitfield is initialized to all
         * ones (but read below for further info) because it works in negative
         * logic (i.e. a change is marked by a zero bit).
         * Below, nby is the number of bytes needed in the input data to map
         * a column (each nozzle is 1 bit, so 208 nozzles are 26 bytes and
         * 192 nozzles are 24 bytes). Ofs is the number of the first bit of
         * the directory bitfield in the directory word (with 208 nozzles we
         * need 26 bits, from 6 to 31, with 192 nozzles we need 24 bits, from
         * 8 to 31). The other three parameters are the values needed to
         * initialize the directory word properly: the key is the first two
         * bits, which must be "10" for a directly encoded stripe and "01" for
         * a RLE encoded one. In the lexmark directory, each bit represents a
         * group of 8 nozzles: in a directly encoded stripe if the bit is "1"
         * it means none of the nozzles in the group are used, if it is a "0"
         * it means at least one is used and we need to append a data byte to
         * define the exact usage pattern. So, for direct encoded stripes we
         * start with the first two bits set to "10" and all the directory
         * bitfield set to "1" (we will unset to "0" only the needed bits in
         * the encoding loop). If we are using RLE encoding, each "0" bits
         * means that there is a data byte that defines a pattern for the
         * group of 8 nozzles associated to that bit, and an "1" means that
         * the pattern for the associated group of nozzles is the same as the
         * previous group. This means that for RLE encoded stripes we start the
         * directory word with two bits set to "01" and then initialize to "1"
         * all the directory bitfield, except the first one which must be 0
         * because we must have at least one data byte to define the initial
         * pattern that will be eventually repeated.
         */
        if(gendata->numlines == 208)
        {
                nby = 26;
                ofs = 6;
                dts0 = 0x83;
                dtr0 = 0x41;
                dtr1 = 0xff;
        }
        else
        {
                nby = 24;
                ofs = 8;
                dts0 = 0x80;
                dtr0 = 0x40;
                dtr1 = 0x7f;
        }

        /* The variable "bytes" will contain the total
         * number of output bytes in the data stripe.
         */
        bytes = 0;

        /* For all the columns in the stripe */
        for(x = 0; x < numcols; x++)
        {
                /* Calculate which representation is smaller by counting
                 * the number of non zero data bytes for the direct encoding
                 * and the number of changes between data bytes for the RLE.
                 * At the end we have in "std" the length of the output data
                 * if encoded with standard encoding, and in "rle" the length
                 * of the output data if encoded with RLE.
                 */
                rle = 1;
                c = read[0];
                std = (c ? 1 : 0);
                for(i=1; i<nby; i++)
                {
                        if((p = read[i]))std++;
                        if(p != c)
                        {
                                rle++;
                                c = read[i];
                        }
                }

                /* Now initialize the last two bytes in the directory
                 * word. These always belong to the directory bitfield
                 * and must be set to all ones.
                 */
                write[2] = 0xff;
                write[3] = 0xff;

                /* And now encode the column, using the shortest encoding.
                 * If the two encodings are of equal length we prefer the
                 * standard encoding to the RLE one. No real reason for
                 * this: it could have been done the other way, but it
                 * seems the Windows driver does this way as well...
                 */
                if(std > rle)
                {
                        /* Run-length encoding */

                        write[0] = dtr0;
                        write[1] = dtr1;

                        p = read[0];
                        write[4] = p;
                        cnt = 5;
                        q = ofs + 1;

                        for(i=1; i<nby; i++)
                        {
                                if(read[i] != p)
                                {
                                        p = read[i];
                                        write[cnt] = p;
                                        write[q>>3] &= ibits[q & 7];
                                        cnt++;
                                }
                                q++;
                        }
                }
                else
                {
                        /* Standard encoding */

                        write[0] = dts0;
                        write[1] = 0xff;

                        cnt = 4;
                        q = ofs;

                        for(i=0; i<nby; i++)
                        {
                                p = read[i];
                                if(p)
                                {
                                        write[cnt] = p;
                                        write[q>>3] &= ibits[q & 7];
                                        cnt++;
                                }
                                q++;
                        }
                }

                /* Update the counters and pointers. Note that when
                 * we are here "cnt" is the number of bytes that we
                 * have actually output, including the directory word.
                 */
                read += (nby + 4);
                write += cnt;
                bytes += cnt;
        }

        fillheader(gendata, head, numcols, firstcol, bytes);
}

/* This routine takes one full buffer of data and
 * prints the black part, which of course is the only
 * one if we are printing in monochrome mode.
 */
static void
encode_bw_buf(pagedata *gendata)
{
        int left, right, x, y, nn, mod;
        int nxp, yy, numcols, incr;
        int dy, dy2, csep, pass, f1;
        int f2, start, s1, s2, yincr;
        int q, mask, lines;
        byte *scan, *data;

        /* Set some parameters that depend on resolution and are
         * used in the inner loop to select lines to print.
         * We basically encode all the even nozzles in a loop and
         * all the odd nozzles in another loop. The values of s1
         * and s2 are the starting offset in the line buffer for
         * the first and second loop, and yincr is the number of lines
         * in the buffer we move on at each cycle.
         */
        switch(gendata->yres)
        {
                /* At 300 dpi we use only one nozzle column, and
                 * each line in the buffer is printed. So both offsets
                 * are zero (only one is used, actually) and yincr is 1.
                 * The mask is set to 127 because the buffer is 128 lines.
                 */
                case 300:
                        yincr = 1;
                        s1 = 0;
                        s2 = 0;
                        mask = 127;
                        break;

                /* At 600 dpi we use both nozzle columns: each row goes
                 * alternatively to the left or right nozzle column. So
                 * the even offset is zero, the odd offset is 1 and the
                 * increment is 2: in this way the even loop scans lines
                 * 0, 2, 4, ... and the odd loop lines 1, 3, 5, ...
                 * Here the buffer is 256 lines so mask is set to 255.
                 */
                default:
                case 600:
                        yincr = 2;
                        s1 = 0;
                        s2 = 1;
                        mask = 255;
                        break;

                /* At 1200 dpi we are printing two interleaved passes. Each
                 * nozzle column sees every fourth line in the buffer (so
                 * yincr is 4) and the starting offset varies depending on
                 * which interleaved pass we are doing.
                 * During the first pass, even nozzles are used to print
                 * lines 0, 4, 8, ... and odd nozzles are used to print
                 * lines 2, 6, 10, ... while in the second pass the even
                 * nozzles print lines 1, 5, 9, ... and the odd nozzles
                 * print lines 3, 7, 11, ...
                 * The buffer is 512 lines, so mask is set to 511 */
                case 1200:
                        yincr = 4;
                        s1 = (gendata->ileave ? 1 : 0);
                        s2 = (gendata->ileave ? 3 : 2);
                        mask = 511;
                        break;
        }

        /* Now we must calculate the offset q from the beginning of
         * the buffer of the first line to print in this pass, and
         * the total number of lines to be printed. We print as many
         * lines as we can in a single pass, i.e. the value of "lines"
         * is simply the number of lines that at the current vertical
         * resolution fully cover the printing pen.
         * Note that in case of monochrome printing we print all
         * buffer lines, from first to last, so we also need to set
         * the mask to a neutral value because we don't use wrapping.
         */
        if(gendata->rendermode == LXM3200_M)
        {
                mask = 511;
                q = 0;
                lines = gendata->numblines;
        }
        else
        {
                q = gendata->firstline + gendata->dev->valign[BLACKVALIGN];
                lines = (BWCOLPEN * 2) / gendata->yrmul;
        }

        /* Adjust the value of the nozzle column separation to the
         * horizontal resolution we are using now.
         */
        csep = (gendata->bwsep * 2) / gendata->xrmul;

        /* Here we calculate how many "real" passes we are doing.
         * A "real" pass is a pass where a full column is printed
         * and then some columns (maybe zero) are skipped before
         * printing another one. If we are at 1200 dpi horizontal
         * then we must use only one nozzle column at a time, so each
         * real pass comprises two subpasses, one where we print with
         * even nozzles only and another where we print with odd
         * nozzles only. So at 1200 dpi the "real" passes are half the
         * total number of passes. Another way of looking at it: the
         * "nxp" variable holds the separation, in columns, between two
         * dot columns printed in the same head sweep.
         */
        nxp = gendata->numpasses;
        if(gendata->xres == 1200)nxp /= 2;

        /* Now calculate the byte increments for the *output* data
         * buffer (i.e. the encoded buffer). The first variable,
         * dy, is the number of bytes taken by a single data burst
         * (both even and odd nozzle columns). The second variable,
         * dy2, tells how many bytes we must skip from one column
         * to the other (if we are printing multipass we skip some
         * columns that will be printed in subsequent passes).
         */
        dy = (gendata->numlines / 8) + 4;
        dy2 = dy * nxp;

        /* Calculate the starting and ending horizontal positions for
         * this head pass. There are the margins corrected to take
         * into account the displacement between the odd and even
         * nozzle columns (csep). Moreover we start "csep" pixels
         * before the margin to give the head a little more room to
         * accelerate properly (not sure if this really works, but it
         * doesn't cost much, so I've left it in).
         */
        if(gendata->direction == LEFT)
        {
                left = gendata->left - 2*csep;
                right = gendata->right + csep;
        }
        else
        {
                left = gendata->left - csep;
                right = gendata->right + 2*csep;
        }
        /* Make sure we don't try to write data to the left of 0, or the right of the
         * media. In the absence of a physical pritner to try this on, we'll have to
         * hope the comment above is correct and we can simply not bother with the
         * optimisation for accelerating the print head. The right edge one seems
         * bonkers, why would we care about accelerating the head when we have
         * already started printing ?
         * This is to fix bug #701905, accessing beyond the end of gendata->outdata
         * in 'convbuf' because right - left > number bytes in scan line.
         */
        if (left < 0)
            left = 0;
        if (right > gendata->numbytes)
            right = gendata->numbytes;

        /* Number of columns in a full row */
        numcols = right - left;

        /* Calculate the last pixel of the first pass of the
         * stripe. If we are printing bidirectionally, this
         * will be the base to calculate the start of the
         * passes printed right-to-left.
         */
        mod = numcols - (numcols % nxp);

        /* f1 and f2 are two flags that define which nozzle columns
         * we are using in this stripe, f1 for the even nozzle column
         * and f2 for the odd nozzle column: if they are zero that
         * nozzle column is not used in this pass.
         */
        f1 = 1;
        f2 = 1;
        if(gendata->yres == 300)
        {
                /* At 300 dpi we use only one nozzle column. As of now this
                 * is always the even one, but maybe it could be tried to
                 * alternate between columns at each pass, to improve the
                 * output quality.
                 */
                f1 = 1;
                f2 = 0;
        }

        /* Now start the passes to fill all the stripe */
        for(pass = 0; pass < gendata->numpasses; pass++)
        {
                /* If there is data in the buffer which has not been
                 * sent to the printer yet, send it now.
                 */
                if(gendata->fullflag)
                {
                        gp_fwrite(gendata->header, 3, 8, gendata->stream);
                        gp_fwrite(gendata->outdata, gendata->stripebytes, 1, gendata->stream);
                        gendata->fullflag = FALSE;
                }

                /* Clear the output buffer to avoid problems with the bitwise
                 * operations we will do later on.
                 */
                memset(gendata->outdata, 0, gendata->numbytes * 30);

                /* Calculate standard increments, starting column
                 * and start of output data. They will be corrected
                 * later for 1200dpi or right-to-left printing direction.
                 */
                incr = nxp;
                start = left + pass;
                data = gendata->outdata + (pass*dy) + 4;

                /* It appears that at 1200dpi, in addition of not being able
                 * to use 208 nozzles mode for the black cartridge, the Lexmark
                 * 3200 cannot print at full rate with all the 192 useable nozzles.
                 * Maybe the reason is that the data rate of 1200dpi horizontal
                 * resolution exceeds the mechanical/thermal limits of the heads.
                 * So if we are printing at 1200dpi we need to use alternatively
                 * only odd or even numbered nozzles, for each printed column, to
                 * half the data rate towards the head.
                 * This obviously means that, at 1200dpi horizontal, a minimum of
                 * two passes are required to print each stripe. Since if we are
                 * printing at 1200dpi vertical we need two interlaced passes, a
                 * minimum grand total of 4 passes are needed to print one full
                 * 1200x1200 dpi stripe with the Lexmark 3200.
                 */
                if(gendata->xres == 1200)
                {
                        f1 = pass & 1;
                        f2 = 1 - f1;

                        start = left + (pass/2);
                        data = gendata->outdata + ((pass/2)*dy) + 4;
                }

                /* If printing right-to-left we need to present data
                 * to the printer in that direction, inverting the
                 * normal flow of data.
                 */
                if(gendata->direction == RIGHT)
                {
                        incr = -nxp;
                        start += mod;
                }

                /* Start column scanning */
                x = start;

                /* Now we split the behaviour depending on the printing
                 * direction. To be honest, the inner loops are almost
                 * identical between left-to-right and right-to-left
                 * directions. The only difference is where is computed
                 * the contribute of the nozzle columns separation ("csep"),
                 * but having the "if" outside the loop it's somehow better.
                 */
                if(gendata->direction == LEFT)
                {
                        /* For all the columns in this pass */
                        for(nn = 0; nn < numcols; nn += nxp)
                        {
                                /* Encode the even numbered nozzles */
                                if((x >= 0) && f1)
                                {
                                        scan = gendata->scanbuf + x;
                                        yy = 0;
                                        for(y = s1; y < lines; y += yincr)
                                        {
                                                if(scan[((y+q) & mask) * gendata->numbytes] & BLACK)
                                                        data[yy/8] |= bits[yy&7];
                                                yy += 2;
                                        }
                                }

                                /* Encode the odd numbered nozzles */
                                if(((x+csep) < gendata->numbytes) && f2)
                                {
                                        scan = gendata->scanbuf + x + csep;
                                        yy = 1;
                                        for(y = s2; y < lines; y += yincr)
                                        {
                                                if(scan[((y+q) & mask) * gendata->numbytes] & BLACK)
                                                        data[yy/8] |= bits[yy&7];
                                                yy += 2;
                                        }
                                }

                                /* If we are in 1200dpi horizontal resolution,
                                 * alternate between nozzle columns to avoid
                                 * overstressing the printing head.
                                 */
                                if(gendata->xres == 1200)
                                {
                                        f1 = 1 - f1;
                                        f2 = 1 - f2;
                                }

                                /* Adjust data pointers */
                                data += dy2;
                                x += incr;
                        }
                }
                else /* direction == RIGHT */
                {
                        /* For all the columns in this pass */
                        for(nn = 0; nn < numcols; nn += nxp)
                        {
                                /* Encode the odd numbered nozzles */
                                if((x < gendata->numbytes) && f1)
                                {
                                        scan = gendata->scanbuf + x;
                                        yy = 1;
                                        for(y = s1; y < lines; y += yincr)
                                        {
                                                if(scan[((y+q) & mask) * gendata->numbytes] & BLACK)
                                                        data[yy/8] |= bits[yy&7];
                                                yy += 2;
                                        }
                                }

                                /* Encode the even numbered nozzles */
                                if(((x-csep) >= 0) && f2)
                                {
                                        scan = gendata->scanbuf + x - csep;
                                        yy = 0;
                                        for(y = s2; y < lines; y += yincr)
                                        {
                                                if(scan[((y+q) & mask)*gendata->numbytes] & BLACK)
                                                        data[yy/8] |= bits[yy&7];
                                                yy += 2;
                                        }
                                }

                                /* If we are in 1200dpi horizontal resolution,
                                 * alternate between nozzle columns to avoid
                                 * overstressing the printing head.
                                 */
                                if(gendata->xres == 1200)
                                {
                                        f1 = 1 - f1;
                                        f2 = 1 - f2;
                                }

                                /* Adjust data pointers */
                                data += dy2;
                                x += incr;
                        }
                }

                /* Convert the buffer to the shortest output format.
                 * Which is the first column of the output depends
                 * on the printing direction: it will be the left
                 * margin if we are printing left to right or the
                 * right margin if we are printing right to left.
                 */
                if(gendata->direction == LEFT)
                        convbuf(gendata, LEFT, numcols, left);
                else
                        convbuf(gendata, LEFT, numcols, right);
        }
}

/* This routine is the equivalent of encode_bw_buf() but
 * for color or photo cartridge. Since this routine is
 * heavily based on the B/W one, the comments here will
 * be somewhat less esaurient. Please have a look at
 * encode_bw_buf() to understand better how this routine
 * works: I will only pinpoint the differences between this
 * routine and encode_bw_buf().
 *
 * head: the head we are calculating the buffer for. It will
 *       be LEFT for a photo cartridge or RIGHT for a color one.
 */
static void
encode_col_buf(pagedata *gendata, int head)
{
        int left, right, x, y, nn, mod;
        int nxp, yy, numcols, incr;
        int dy, dy2, csep, pass, f1;
        int f2, start, s1, s2, yincr;
        int q, mask, k, align, lines;
        byte *scan, *data;

        /* Here there are two more parameters: mask and lines, that
         * for color cartridges are both dependent on vertical
         * resolution. Since the buffer is "rolling", i.e. it is
         * implemented as a circular array, all the coordinates of
         * the buffer lines must be taken modulo the buffer length.
         * We choose a buffer length that is a power of two to be
         * able to turn the modulo operation into a bitwise AND, so
         * we need to set "mask" to the correct value for the AND.
         * Another difference is that "lines", i.e. the number of
         * lines to print in each pass, is based on the height of a
         * color pen. Since there are three color pens in each cartridge,
         * each color pen is treated separately to fully cover the
         * printing head.
         */
        switch(gendata->yres)
        {
                case 300:
                        yincr = 1;
                        s1 = 0;
                        s2 = 0;
                        mask = 127;
                        lines = COLORPEN/2;
                        break;

                default:
                case 600:
                        yincr = 2;
                        s1 = 0;
                        s2 = 1;
                        mask = 255;
                        lines = COLORPEN;
                        break;

                case 1200:
                        yincr = 4;
                        s1 = (gendata->ileave ? 1 : 0);
                        s2 = (gendata->ileave ? 3 : 2);
                        mask = 511;
                        lines = COLORPEN*2;
                        break;
        }

        /* Choose the vertical alignment depending on the head.
         * This is needed to vertically align the color cartridge
         * with the photo or black cartridge.
         */
        if(head == LEFT)
                align = gendata->dev->valign[PHOTOVALIGN];
        else
                align = gendata->dev->valign[COLORVALIGN];

        /* All the stuff below is exactly the same as in
         * encode_bw_buf(), and is therefore commented there.
         */

        csep = (gendata->bwsep * 2) / gendata->xrmul;
        nxp = gendata->numpasses;
        if(gendata->xres == 1200)nxp /= 2;

        dy = (gendata->numlines / 8) + 4;
        dy2 = dy * nxp;

        if(gendata->direction == LEFT)
        {
                left = gendata->left - 2*csep;
                right = gendata->right + csep;
        }
        else
        {
                left = gendata->left - csep;
                right = gendata->right + 2*csep;
        }

        numcols = right - left;
        mod = numcols - (numcols % nxp);

        f1 = 1;
        f2 = 1;
        if(gendata->yres == 300)
        {
                f1 = 1;
                f2 = 0;
        }

        /* For all passes */
        for(pass = 0; pass < gendata->numpasses; pass++)
        {
                /* If there is data in the buffer which has not been
                 * sent to the printer yet, do it now.
                 */
                if(gendata->fullflag)
                {
                        gp_fwrite(gendata->header, 3, 8, gendata->stream);
                        gp_fwrite(gendata->outdata, gendata->stripebytes, 1, gendata->stream);
                        gendata->fullflag = FALSE;
                }

                /* All the stuff below is exactly the same as in
                 * encode_bw_buf(), and is therefore commented there.
                 */

                memset(gendata->outdata, 0, gendata->numbytes * 30);

                incr = nxp;
                start = left + pass;
                data = gendata->outdata + (pass*dy) + 4;

                if(gendata->xres == 1200)
                {
                        f1 = pass & 1;
                        f2 = 1 - f1;

                        start = left + (pass/2);
                        data = gendata->outdata + ((pass/2)*dy) + 4;
                }

                if(gendata->direction == RIGHT)
                {
                        incr = -nxp;
                        start += mod;
                }

                /* Start column scanning */
                x = start;

                if(gendata->direction == LEFT)
                {
                        /* For all the columns */
                        for(nn = 0; nn < numcols; nn += nxp)
                        {
                                /* Encode the even numbered nozzles */
                                if((x >= 0) && f1)
                                {
                                        scan = gendata->scanbuf + x;
                                        yy = 0;

                                        /* In color printing there is one more loop to scan
                                         * all three color pens. We have to do exactly the
                                         * same things for all pens: the only differences are
                                         * the color encoding bit we are testing and the offset
                                         * from the beginning of the buffer and the offset of the
                                         * output data. All of this is stored into arrays. The
                                         * "penofs" array stores the offset of the first line of
                                         * each pen in the raster buffer. The array "colmask" stores
                                         * the encoding bits for the color of each pen, and it
                                         * is bidimensional because pen masks are different between
                                         * a color cartridge (where pens are Cyan, Magenta, Yellow)
                                         * and a photo cartridge (where pens are LightCyan,
                                         * LightMagenta and Black).
                                         */
                                        for(k=0; k<3; k++)
                                        {
                                                q = gendata->firstline + align + gendata->dev->penofs[k];
                                                for(y = s1; y < lines; y += yincr)
                                                {
                                                        if(scan[((y+q) & mask) * gendata->numbytes] & colmask[head][k])
                                                                data[yy/8] |= bits[yy&7];
                                                        yy += 2;
                                                }
                                        }
                                }

                                /* Encode the odd numbered nozzles */
                                if(((x+csep) < gendata->numbytes) && f2)
                                {
                                        scan = gendata->scanbuf + x + csep;
                                        yy = 1;
                                        for(k=0; k<3; k++)
                                        {
                                                q = gendata->firstline + align + gendata->dev->penofs[k];
                                                for(y = s2; y < lines; y += yincr)
                                                {
                                                        if(scan[((y+q) & mask) * gendata->numbytes] & colmask[head][k])
                                                                data[yy/8] |= bits[yy&7];
                                                        yy += 2;
                                                }
                                        }
                                }

                                /* If we are in 1200dpi horizontal resolution,
                                 * alternate between nozzle columns to avoid
                                 * overstressing the printing head.
                                 */
                                if(gendata->xres == 1200)
                                {
                                        f1 = 1 - f1;
                                        f2 = 1 - f2;
                                }

                                /* Adjust data pointers */
                                data += dy2;
                                x += incr;
                        }
                }
                else
                {
                        /* For all the columns */
                        for(nn = 0; nn < numcols; nn += nxp)
                        {
                                /* Encode the odd numbered nozzles */
                                if((x < gendata->numbytes) && f1)
                                {
                                        scan = gendata->scanbuf + x;
                                        yy = 1;
                                        for(k=0; k<3; k++)
                                        {
                                                q = gendata->firstline + align + gendata->dev->penofs[k];
                                                for(y = s1; y < lines; y += yincr)
                                                {
                                                        if(scan[((y+q) & mask) * gendata->numbytes] & colmask[head][k])
                                                                data[yy/8] |= bits[yy&7];
                                                        yy += 2;
                                                }
                                        }
                                }

                                /* Encode the even numbered nozzles */
                                if(((x-csep) >= 0) && f2)
                                {
                                        scan = gendata->scanbuf + x - csep;
                                        yy = 0;
                                        for(k=0; k<3; k++)
                                        {
                                                q = gendata->firstline + align + gendata->dev->penofs[k];
                                                for(y = s2; y < lines; y += yincr)
                                                {
                                                        if(scan[((y+q) & mask) * gendata->numbytes] & colmask[head][k])
                                                                data[yy/8] |= bits[yy&7];
                                                        yy += 2;
                                                }
                                        }
                                }

                                /* If we are in 1200dpi horizontal resolution,
                                 * alternate between nozzle columns to avoid
                                 * overstressing the printing head.
                                 */
                                if(gendata->xres == 1200)
                                {
                                        f1 = 1 - f1;
                                        f2 = 1 - f2;
                                }

                                /* Adjust data pointers */
                                data += dy2;
                                x += incr;
                        }
                }

                if(gendata->direction == LEFT)
                        convbuf(gendata, head, numcols, left);
                else
                        convbuf(gendata, head, numcols, right);
        }
}

/* Fill monochrome buffer: this routine fills the buffer
 * with rasterized lines, skipping over vertical spacing
 * (i.e. completely blank lines). The routine is only
 * used in monochrome mode, where we print a full buffer
 * at each stripe. The color printing needs a different
 * routine which makes use of a circular buffer.
 *
 * vline: the line from which to start searching for data.
 */
static int
fill_mono_buffer(pagedata *gendata, int vline)
{
        byte *in_data, *data;
        int i, ret, ofs, code = 0;

        /* Initialize the "data" pointer, that will be used to
         * scan all the lines in the buffer, and the "ofs" pointer
         * that will be used to mark the start of the "real" rasterized
         * data into the buffer (see below). To compensate for the offsets
         * caused by the horizontal spacing between nozzle columns on a
         * cartridge, the head must start before the horizontal margin, so
         * the buffer width is slightly bigger than the width of the
         * rasterized lines. The difference is the "guard offset", and the
         * variables gendata->numbytes and gendata->numrbytes hold respectively
         * the number of bytes in a buffer line and the number of bytes in a
         * rasterized scanline, while gendata->goffset contains the number of
         * bytes reserved to the guard offset on each side of the scanline.
         */
        data = gendata->scanbuf;
        ofs = gendata->goffset;

        /* Cycle until we have no more lines on the page */
        while(vline < gendata->numvlines)
        {
                /* Ask Ghostscript for one rasterized line */
                code = gdev_prn_get_bits((gx_device_printer *)gendata->dev,
                                                                                        vline, data+ofs, &in_data);
                if (code < 0)
                    return code;

                /* And check if it's all zero: if not, break out of
                 * the loop. This nice trick with memcpy it's by Stephen
                 * Taylor (if I'm not wrong...)

                 */
                if(in_data[0] != 0 ||
                         memcmp(in_data, in_data+1,gendata->numrbytes-1))break;
                vline++;
        }

        /* If we are here because no non-empty lines were found before
         * the end of the page, our work is over. Return to the caller
         * saying that this is the last buffer (LAST bit set) and it's
         * empty (no LHDATA or RHDATA bit set).
         */
        if(vline >= gendata->numvlines)return(LAST);

        /* This buffer contains at least one non-empty line.
         * Adjust the current vertical position and load the first
         * line into the buffer.
         */
        gendata->curvline = vline;
        memset(data, 0, gendata->numbytes);
        if(in_data != data+ofs)memcpy(data+ofs, in_data, gendata->numrbytes);

        vline++;
        data += gendata->numbytes;

        /* Now initialize the return value to LHDATA (since at least
         * one non-blank line was found, this buffer contains data, and
         * it is obviously left-head data because we are in monochromatic
         * mode and so we are printing with left head only).
         * After that, get as many rasterized lines as needed to fill the
         * buffer, checking if in the process we have reached the end of
         * the page.
         */
        ret = LHDATA;
        for(i=1; i<gendata->numblines; i++)
        {
                memset(data, 0, gendata->numbytes);
                if(vline > gendata->numvlines)
                {
                        /* Ok, we are at the end of the page, so set the LAST bit
                         * in the return value but don't exit the loop because we
                         * need to make sure all remaining lines in the buffer will
                         * be blanked (exiting now would leave them untouched from
                         * the previous stripe). This is needed to avoid printing
                         * random data under the bottom margin.
                         */
                        ret = LHDATA | LAST;
                }
                else
                {
                        /* If we are not at the end of the page, copy one more
                         * scanline into the buffer.
                         */
                        code = gdev_prn_get_bits((gx_device_printer *)gendata->dev,
                                                                                                vline, data+ofs, &in_data);
                        if (code < 0)
                            return code;
                        if(in_data != data+ofs)memcpy(data+ofs, in_data, gendata->numrbytes);
                }

                vline++;
                data += gendata->numbytes;

        }

        return(ret);
}

/* Fill the buffer with initial data.
 * This routine is used to load the first buffer at the
 * beginning of the page. If we are printing in monochromatic
 * mode, we just call fill_mono_buffer for the first line.
 * If we are printing in color mode, we have a problem to
 * solve: since the color pen are stacked vertically, we
 * need multiple head passes to print all colors on the
 * same line. So, to simplify all, we start with the paper
 * at a fixed vertical position, even if it's blank, and
 * then we go down in fixed increments, equal to the height
 * of a color pen. This means we check all buffers without
 * skipping over blank ones, but since we actually send the
 * printing commands to the printer only when there is something
 * to print, there is no speed impact.
 */
static int
init_buffer(pagedata *gendata)
{
        byte *in_data, *data;
        int i, ret, p1, p2, ofs, code = 0;

        data = gendata->scanbuf;
        ofs = gendata->goffset;

        if(gendata->rendermode == LXM3200_M)return(fill_mono_buffer(gendata, 0));

        /* We position the heads with the bottom color pen (the
         * yellow one in the color cartridge and the black one
         * in the photo cartridge) just covering the first lines
         * of the paper sheet. So the first buffer is divided in
         * two parts: "p1" is the number of lines above the top
         * border and "p2" the number of lines below.
         */
        p1 = 368 / gendata->yrmul;
        p2 = 144 / gendata->yrmul;

        /* Initialize the counters */
        gendata->curvline = -p1;
        gendata->lastblack = gendata->curvline - 1;
        data = gendata->scanbuf;

        /* Clear the lines of the buffer that correspond to
         * lines above the top margin: of course we don't
         * want to print anything on the air...
         */
        for(i=0; i<p1; i++)
        {
                memset(data, 0, gendata->numbytes);
                data += gendata->numbytes;
        }

        /* And now load the last part of the buffer.
         * Note that here we don't check for blank lines,
         * this will be cared for later.
         */
        for(i=0; i<p2; i++)
        {
                memset(data, 0, gendata->numbytes);

                if(i < gendata->numvlines)
                {
                        code = gdev_prn_get_bits((gx_device_printer *)gendata->dev,
                                                                                                i, data+ofs, &in_data);
                        if (code < 0)
                            return code;

                        if(in_data != data+ofs)memcpy(data+ofs, in_data, gendata->numrbytes);
                }

                data += gendata->numbytes;
        }

        gendata->firstline = 0;

        /* Now check the return value. If by chance we are under
         * the bottom margin, add the LAST bit to the return value.
         * Of course, since this is the first buffer of the page,
         * it's not likely we will reach the bottom margin in
         * this pass. Anyway this is code that will be executed
         * only once per page, so better safe than sorry.
         */
        ret = (gendata->numvlines < p2 ? LAST : 0) | qualify_buffer(gendata);

        return(ret);
}

/* This function checks if the current buffer contains
 * data to be printed with the left or right head.
 * It assumes that we are printing in color mode, and it
 * is useful to minimize the number of needed passes.
 * When we are printing in monochrome mode we directly skip
 * over blank lines, so this routine is not needed.
 */
static int
qualify_buffer(pagedata *gendata)
{
        int i, j, k, ret;
        int rmsk, q, v1;
        int bpsz, cpsz;
        byte *data;

        ret = 0;

        /* Set variables which contains the size, in rows, of
         * each color pen and of the black pen in color mode,
         * adjusting for different resolution settings.
         * Also set the mask used to rollover the buffer.
         */
        cpsz = (COLORPEN * 2) / gendata->yrmul;
        bpsz = (BWCOLPEN * 2) / gendata->yrmul;
        rmsk = gendata->numblines - 1;

        /* Check the right head data, it is always a color cartridge */
        for(k=0; k<3 && ret==0; k++)
        {
                /* For each pen, scan all the bytes on each row of
                 * the buffer that is covered by the current pen,
                 * ORing together all the bits.
                 */
                v1 = 0;
                q = gendata->firstline + gendata->dev->valign[COLORVALIGN] + gendata->dev->penofs[k];
                for(i=0; i<cpsz; i++)
                {
                        data = gendata->scanbuf + ((q+i) & rmsk)*gendata->numbytes;
                        for(j=0; j<gendata->numbytes; j++)v1 |= *data++;
                }
                /* If the result of the OR has the proper color bit
                 * set, it means that this buffer contains at least
                 * one pixel of this pen, so we need a color pass.
                 * Note that we exit as soon as we find a color bit
                 * set, because if at least one color pen is used
                 * in this buffer we need to do a color pass anyway,
                 * so there's no need to check the other two pens.
                 */
                if(v1 & colmask[RIGHT][k])ret |= RHDATA;
        }

        /* Check the left head data: it could be a black or
         * a photo cartridge, depending on the printing mode.
         */
        if(gendata->rendermode == LXM3200_C)
        {
                /* We are in standard color mode: the left cartridge
                 * is a black cartridge used in 192 nozzles mode.
                 * This is done exactly in the same way as above, but
                 * without the outer loop because we have only one
                 * color pen on this cartridge.
                 */
                v1 = 0;
                q = gendata->firstline + gendata->dev->valign[BLACKVALIGN];
                for(i=0; i<bpsz; i++)
                {
                        data = gendata->scanbuf + ((q+i) & rmsk)*gendata->numbytes;
                        for(j=0; j<gendata->numbytes; j++)v1 |= *data++;
                }
                if(v1 & BLACK)ret |= LHDATA;
        }
        else
        {
                /* If we are here we need to check for a photo cartridge
                 * (this routine is never called in monochrome mode, so
                 * if we are not in color mode we must be in photo mode).
                 * This routine is identical to the color routine above.
                 */
                for(k=0; k<3 && !(ret & LHDATA); k++)
                {
                        v1 = 0;
                        q = gendata->firstline + gendata->dev->valign[PHOTOVALIGN] + gendata->dev->penofs[k];
                        for(i=0; i<cpsz; i++)
                        {
                                data = gendata->scanbuf + ((q+i) & rmsk)*gendata->numbytes;
                                for(j=0; j<gendata->numbytes; j++)v1 |= *data++;
                        }
                        if(v1 & colmask[LEFT][k])ret |= LHDATA;
                }
        }

        return(ret);
}

/* This functions rolls the circular buffer by the
 * number of lines of one color pen, reading new
 * lines to refill the buffer.
 * In color mode we use a circular buffer because
 * we need to read the same lines more than once.
 * So when we are forwarding to the next pass we
 * simply read in the new lines and then update the
 * pointers, without actually moving data into memory.
 * The need to read the same data more than once arises
 * from the fact that the color pens are vertically
 * stacked, so we need to read a data line to lay down
 * the yellow component at the first pass. We need to
 * read it again at the next pass to lay down magenta,
 * and on the last pass we read the same line once more
 * to lay down the cyan component.
 */
static int
roll_buffer(pagedata *gendata)
{
        int i, ret, fline, vl, ofs;
        int cpen, cmask, lline;
        byte *data, *in_data;

        /* Adjust the size of the color pen and the
         * mask to take into account the current resolution
         */
        cpen = (COLORPEN * 2) / gendata->yrmul;
        cmask = (gendata->numblines) - 1;

        /* Calculate the line number corresponding to
         * the last buffer we can print before being
         * forced to eject the page. At 600dpi this
         * has been experimentally determined to be
         * 112 lines from the bottom of the page.
         */
        lline = gendata->numvlines - (224 / gendata->yrmul);

        /* Roll the buffer by advancing the first line
         * pointer by the height of one color pen.
         */
        fline = gendata->firstline;
        gendata->firstline = (fline + cpen) & cmask;

        /* Now calculate the pointer to the first "fresh"
         * line on the page, i.e. the first line we must
         * read into the buffer at this pass.
         */
        vl = gendata->curvline + cmask + 1;

        /* Take into account the guard offset */
        ofs = gendata->goffset;

        /* Initialize the return value and update the
         * current vertical position on the page, while
         * checking if we have reached the last printable
         * buffer.
         */
        ret = 0;
        gendata->curvline += cpen;
        if(gendata->curvline >= lline)ret = LAST;

        /* Now read "fresh" rasterized scanlines into the
         * input buffer.
         */
        for(i=0; i<cpen; i++)
        {
                data = gendata->scanbuf + ((fline + i) & cmask) * gendata->numbytes;

                memset(data, 0, gendata->numbytes);
                if(vl < gendata->numvlines)
                {
                        int code = gdev_prn_get_bits((gx_device_printer *)gendata->dev, vl, data+ofs, &in_data);
                        if (code < 0) {
                            return code;
                        }
                        if(in_data != data+ofs)memcpy(data+ofs, in_data, gendata->numrbytes);
                }
                vl++;
        }

        /* And test for the presence of actual data to print */
        ret |= qualify_buffer(gendata);

        return(ret);
}

/* Calculate the margins of one line, i.e. the leftmost
 * and the rightmost non-blank pixel on the line.
 *
 * data:  the pointer to the data for this line
 * mask:  the mask with the bits to check for: if the buffer
 *        contains data which is not on the mask it will be
 *        ignored (for the purpose of calculating margins)
 * left:  calculated left margin (output variable)
 * right: calculated right margin (output variable)
 */
static void
calclinemargins(pagedata *gendata, byte *data, int mask, int *left, int *right)
{
        int l,r,num;

        num = gendata->numbytes - 1;

        l = 0;
        while((l <= num) && ((data[l] & mask) == 0))l++;

        r = num;
        while((r >= 0) && ((data[r] & mask) == 0))r--;

        *left = l;
        *right = r;
}

/* Calculate the margins of the whole buffer. The
 * calculation accounts separately for the data to
 * be printed with the left or with the right head,
 * so we can try to minimize the head movement even
 * on multiple passes.
 *
 * head: the code of the head we are calculating
 *       margins for (LEFT or RIGHT)
 */
static void
calcbufmargins(pagedata *gendata, int head)
{
        int i, l1, r1, q, k;
        int mleft, mright, nl;
        int cpen, cmask, al;
        byte *scan;

        /* Adjust mask and pen height according to vertical resolution */
        cpen = (COLORPEN * 2) / gendata->yrmul;
        cmask = (gendata->numblines) - 1;

        /* Calculate margins for a color or photo cartridge */
        if(head == RIGHT || (gendata->rendermode == LXM3200_P))
        {
                /* Get correct vertical aligment */
                al = (head == LEFT ? PHOTOVALIGN : COLORVALIGN);

                q = gendata->firstline + gendata->dev->valign[al];

                /* Calculate margins for first line, using those values
                 * to initialize the max and min values.
                 */
                scan = gendata->scanbuf + ((q+gendata->dev->penofs[0]) & cmask)*gendata->numbytes;
                calclinemargins(gendata, scan, colmask[head][0], &mleft, &mright);

                /* And now scan all the remaining buffer. We scan according
                 * to color pens, i.e. we calculate the margin on the rows
                 * where magenta will be laid down taking into account magenta
                 * pixels only, and this will be the magenta submargin. After
                 * having done that for cyan and yellow as well, we take as the
                 * global margin the smaller space that contains all the three
                 * submargins.
                 */
                for(k=0; k<3; k++)
                {
                        for(i=0; i<cpen; i++)
                        {
                                scan = gendata->scanbuf + ((q+i+gendata->dev->penofs[k]) & cmask)*gendata->numbytes;
                                calclinemargins(gendata, scan, colmask[head][k], &l1, &r1);
                                mleft = min(mleft, l1);
                                mright = max(mright, r1);
                        }
                }

                gendata->left = mleft;
                gendata->right = mright;

                return;
        }

        /* Calculate buffer margins for a black head. This is
         * almost exactly the same as before, but now we do
         * a single pass because we have only one black pen.
         */
        if(gendata->rendermode == LXM3200_M)
        {
                /* Monochromatic mode: we use 208 nozzles and
                 * all the buffer, so the initial offset is zero.
                 */

                scan = gendata->scanbuf;
                calclinemargins(gendata, scan, BLACK, &mleft, &mright);

                for(i=1; i<gendata->numblines; i++)
                {
                        scan += gendata->numbytes;
                        calclinemargins(gendata, scan, BLACK, &l1, &r1);
                        mleft = min(mleft, l1);
                        mright = max(mright, r1);
                }

                gendata->left = mleft;
                gendata->right = mright;

                return;
        }

        /* Standard color mode: we use 192 nozzles and must
         * take into account the vertical alignment.
         */

        nl = (gendata->numlines * 2) / gendata->yrmul;
        q = gendata->firstline + gendata->dev->valign[BLACKVALIGN];

        scan = gendata->scanbuf + (q & cmask)*gendata->numbytes;
        calclinemargins(gendata, scan, BLACK, &mleft, &mright);

        for(i=1; i<nl; i++)
        {
                scan = gendata->scanbuf + ((q+i) & cmask)*gendata->numbytes;
                calclinemargins(gendata, scan, BLACK, &l1, &r1);
                mleft = min(mleft, l1);
                mright = max(mright, r1);
        }
        gendata->left = mleft;
        gendata->right = mright;
}

/*
 * This is the main routine that prints in
 * standard color mode.
 */
static int
print_color_page(pagedata *gendata)
{
        int res, lline, cmask;
        int i, j, nl, q, sk;
        byte *scan;

        /* Set the blackskip value depending on vertical resolution.
         * Since we have a black pen which is 3 times as high as
         * each color pen, we must print black only once every three
         * passes. So we take into account on which line we printed
         * the last black stripe and then we print another only if
         * the current line is at least "sk" lines after that.
         */
        sk = (BWCOLPEN * 2) / gendata->yrmul;

        /* Get the first buffer, and if it's empty continue
         * to skip forward without doing anything.
         */
        res = init_buffer(gendata);
        while(res == 0)res = roll_buffer(gendata);
        if (res < 0) {
            return res;
        }

        /* If this buffer happens to be the last one,
         * and empty as well, we had a blank page.
         * Just exit without ado.
         */
        if(res == LAST)return 0;

        /* This is the first non-blank line of the
         * page: issue a vertical skip command to
         * advance the paper to proper position.
         */
        skiplines(gendata, gendata->curvline, COLTOPSTART);

        /* "lline" holds the number of the first line of
         * the last buffer printed, either with left or
         * right head. This is needed to keep track of
         * how many lines we must skip from one stripe to
         * the next (if we encounter blank buffers we just
         * ignore them without moving the head, so we need
         * to do the proper vertical motion in one single
         * pass as soon as we encounter a non-blank buffer).
         */
        lline = gendata->curvline;

        /* Now depending on the data we have into the
         * buffer, print with the left head, right
         * head or both.
         * NOTE: this is the first buffer, and it needs
         * to be treated specially from the others.
         * The main difference is that we usually finalize
         * the buffer (issuing the print commands) at the
         * start of the next buffer, and not at the end of
         * the current one. This is because the Lexmark 3200
         * wants to know where to leave the printing head
         * at the end of each printing command, but we can't
         * know that until we start the next buffer so discovering
         * its margins and position. The solution is that we keep
         * "suspended" each buffer until we find another valid one.
         * The first buffer is special since there is no previous
         * buffer to finalize.
         * NOTE: I will comment the general case below, because
         * this code is simply a subset of the main loop.
         */
        switch(res)
        {
                case LHDATA:
                        calcbufmargins(gendata, LEFT);
                        gendata->ileave = 0;
                        encode_bw_buf(gendata);
                        gendata->lastblack = gendata->curvline + sk;
                        lline = gendata->curvline;
                        if(gendata->yres == 1200)
                        {
                                finalizeheader(gendata, 1, LEFT);
                                gendata->ileave = 1;
                                encode_bw_buf(gendata);
                                lline++;
                        }
                        break;

                case RHDATA:
                        calcbufmargins(gendata, RIGHT);
                        gendata->ileave = 0;
                        encode_col_buf(gendata, RIGHT);
                        lline = gendata->curvline;
                        if(gendata->yres == 1200)
                        {
                                finalizeheader(gendata, 1, RIGHT);
                                gendata->ileave = 1;
                                encode_col_buf(gendata, RIGHT);
                                lline++;
                        }
                        break;

                case LHDATA|RHDATA:
                        calcbufmargins(gendata, LEFT);
                        gendata->ileave = 0;
                        encode_bw_buf(gendata);
                        gendata->lastblack = gendata->curvline + sk;
                        calcbufmargins(gendata, RIGHT);
                        finalizeheader(gendata, 0, RIGHT);
                        encode_col_buf(gendata, RIGHT);
                        lline = gendata->curvline;
                        if(gendata->yres == 1200)
                        {
                                calcbufmargins(gendata, LEFT);
                                finalizeheader(gendata, 1, LEFT);
                                gendata->ileave = 1;
                                encode_bw_buf(gendata);
                                calcbufmargins(gendata, RIGHT);
                                finalizeheader(gendata, 0, RIGHT);
                                encode_col_buf(gendata, RIGHT);
                                lline++;
                        }
                        break;
        }

        /* Skip to next buffer */
        res = roll_buffer(gendata);

        /* Start the main loop. Here we do all the stuff required
         * to print buffers properly.
         */
        while(!(res & LAST))
        {
                /* If we haven't forwarded until "lastblack", do not
                 * print black data because it has been printed on
                 * previous passes. So, if we are below gendata->lastblack
                 * clear the LHDATA flag to ignore left-head data.
                 */
                if(gendata->curvline < gendata->lastblack)res &= ~LHDATA;

                /* And now start examining the buffer for data */
                switch(res)
                {
                        /* We have left head data */
                        case LHDATA:

                                /* Calculate the margins of this buffer */
                                calcbufmargins(gendata, LEFT);

                                /* And then finalize the previous buffer. We can't
                                 * do this until now, because only now we know the
                                 * margins and vertical position of the next buffer,
                                 * which are required data to calculate the final
                                 * head position at the end of the previous buffer.
                                 */
                                finalizeheader(gendata, gendata->curvline - lline, LEFT);

                                /* Set interleave to zero (only meaningful in 1200dpi
                                 * vertical mode.
                                 */
                                gendata->ileave = 0;

                                /* Encode this buffer making it the current buffer */
                                encode_bw_buf(gendata);

                                /* Since we are printing a black buffer, update
                                 * gendata->lastblack to point to the first line
                                 * not covered by this black pass.
                                 */
                                gendata->lastblack = gendata->curvline + sk;

                                /* And update "lline" as well */
                                lline = gendata->curvline;

                                /* If we are printing at 1200 dpi vertical, we must
                                 * do one more pass, interleaved with the one before.
                                 */
                                if(gendata->yres == 1200)
                                {
                                        /* Finalize previous buffer, moving down 1/1200th
                                         * of an inch to properly interleave the two passes.
                                         * This is naive: we should do something here, because
                                         * this way two adjacent lines are printed by the same
                                         * nozzle, and there is the danger of having a slight
                                         * banding on output (no more than 1/600th of an inch,
                                         * but maybe noticeable).
                                         */
                                        finalizeheader(gendata, 1, LEFT);

                                        /* Set interleave to 1 to start an interleaved pass */
                                        gendata->ileave = 1;

                                        /* Encode the buffer, and not finalize it: we leave
                                         * the buffer suspended until we find another buffer
                                         * to print.
                                         */
                                        encode_bw_buf(gendata);

                                        /* And adjust "lline" because to print the interleaved
                                         * pass we have moved down one line, so we need to
                                         * skip one line less to print the next buffer.
                                         */
                                        lline++;
                                }
                                break;

                        /* Right head data. This is absolutely identical to the
                         * code above for left head data, with two exceptions: all
                         * the "LEFT" codes are changed to "RIGHT" and we don't
                         * update gendata->lastblack because we are printing a
                         * color stripe and not a black one.
                         */
                  case RHDATA:
                                calcbufmargins(gendata, RIGHT);
                                finalizeheader(gendata, gendata->curvline - lline, RIGHT);
                                gendata->ileave = 0;
                                encode_col_buf(gendata, RIGHT);
                                lline = gendata->curvline;
                                if(gendata->yres == 1200)
                                {
                                        finalizeheader(gendata, 1, RIGHT);
                                        gendata->ileave = 1;
                                        encode_col_buf(gendata, RIGHT);
                                        lline++;
                                }
                                break;

                        /* We have both left and right head data (i.e. black and
                         * color on the same stripe).
                         * The code here is identical to the code for the left data
                         * only and right data only cases above. But they are
                         * interleaved, because since we can't take back the paper
                         * once it's advanced, in case we are printing at 1200 dpi
                         * vertical (and so we need two interlaced passes) we need
                         * to do both the first black and the first color pass,
                         * advance the paper and then do the second black and the
                         * second color pass. Simply appendig the two code pieces
                         * above would not work.
                         */
                        case LHDATA|RHDATA:
                                calcbufmargins(gendata, LEFT);
                                finalizeheader(gendata, gendata->curvline - lline, LEFT);
                                gendata->ileave = 0;
                                encode_bw_buf(gendata);
                                gendata->lastblack = gendata->curvline + sk;
                                calcbufmargins(gendata, RIGHT);
                                finalizeheader(gendata, 0, RIGHT);
                                encode_col_buf(gendata, RIGHT);
                                lline = gendata->curvline;
                                if(gendata->yres == 1200)
                                {
                                        calcbufmargins(gendata, LEFT);
                                        finalizeheader(gendata, 1, LEFT);
                                        gendata->ileave = 1;
                                        encode_bw_buf(gendata);
                                        calcbufmargins(gendata, RIGHT);
                                        finalizeheader(gendata, 0, RIGHT);
                                        encode_col_buf(gendata, RIGHT);
                                        lline++;
                                }
                                break;
                }

                /* Get another buffer */
                res = roll_buffer(gendata);
        }

        /* Last buffer. We treat this one specially as well,
         * because we don't have a subsequent buffer to print,
         * and so we need to finalize this buffers as soon as
         * possible.
         */
        res = qualify_buffer(gendata);

        /* Void the printed blacks. Since we are printing the
         * last buffer, it could happen that we have advanced
         * from the last time we printed a black stripe but
         * we are not yet at the point where another black
         * stripe would have been triggered. This would cause
         * an eventual black component in the last lines of
         * the page to be ignored.
         * To avoid the problem we do an unconditional black
         * pass, but we also must clear the black bits from the
         * lines we have already printed otherwise we would
         * print them twice.
         */
        if((res & LHDATA) && (gendata->curvline <= gendata->lastblack))
        {
                /* Find how many black lines we have yet printed
                 * are still in the buffer
                 */
                nl = gendata->lastblack - gendata->curvline;

                /* And now remove the BLACK bit from them */

                q = gendata->firstline + gendata->dev->valign[BLACKVALIGN];
                cmask = (gendata->numblines) - 1;
                for(i=0; i<nl; i++)
                {
                        scan = gendata->scanbuf + ((i+q) & cmask)*gendata->numbytes;
                        for(j=0; j<gendata->numbytes; j++)
                        {
                                *scan &= ~BLACK;
                                scan++;
                        }
                }
        }

        /* Now we can print the last buffer as usual.
         * This is perfectly identical to the code
         * into the loop above: we are replicating it
         * only because we need the blanking code above
         * to be executed before this code.
         * Maybe there is a better way to do it...
         */
        switch(res)
        {
                case LHDATA:
                        calcbufmargins(gendata, LEFT);
                        finalizeheader(gendata, gendata->curvline - lline, LEFT);
                        gendata->ileave = 0;
                        encode_bw_buf(gendata);
                        if(gendata->yres == 1200)
                        {
                                finalizeheader(gendata, 1, LEFT);
                                gendata->ileave = 1;
                                encode_bw_buf(gendata);
                                lline++;
                        }
                        break;

                case RHDATA:
                        calcbufmargins(gendata, RIGHT);
                        finalizeheader(gendata, gendata->curvline - lline, RIGHT);
                        gendata->ileave = 0;
                        encode_col_buf(gendata, RIGHT);
                        if(gendata->yres == 1200)
                        {
                                finalizeheader(gendata, 1, RIGHT);
                                gendata->ileave = 1;
                                encode_col_buf(gendata, RIGHT);
                                lline++;
                        }
                        break;

                case LHDATA|RHDATA:
                        calcbufmargins(gendata, LEFT);
                        finalizeheader(gendata, gendata->curvline - lline, LEFT);
                        gendata->ileave = 0;
                        encode_bw_buf(gendata);
                        calcbufmargins(gendata, RIGHT);
                        finalizeheader(gendata, 0, RIGHT);
                        encode_col_buf(gendata, RIGHT);
                        if(gendata->yres == 1200)
                        {
                                calcbufmargins(gendata, LEFT);
                                finalizeheader(gendata, 1, LEFT);
                                gendata->ileave = 1;
                                encode_bw_buf(gendata);
                                calcbufmargins(gendata, RIGHT);
                                finalizeheader(gendata, 0, RIGHT);
                                encode_col_buf(gendata, RIGHT);
                                lline++;
                        }
                        break;
        }

        /* Now finalize the header using a value of "0" for
         * the vertical skip (no need to move down: the
         * paper is about to be ejected) and -1 for the
         * head (meaning: last buffer, don't care for the
         * final head position, it will be reset unconditionally
         * by the trailing sequence).
         */
        finalizeheader(gendata, 0, -1);

        return 0;
}

/* This is the equivalent of print_color_page()
 * for monochrome output. It is almost identical,
 * only much simpler because now we are printing
 * with only one head.
 */
static void
print_mono_page(pagedata *gendata)
{
        int res, lline;

        /* Load the first buffer, skipping over
         * blank lines (if any).
         */
        res = init_buffer(gendata);

        /* If we happen to have a buffer which is LAST
         * and empty, we have a blank page to print:
         * just say goodbye.
         */
        if(res == LAST)return;

        /* Skip enough lines to reach the start of
         * the first stripe to print.
         */
        skiplines(gendata, gendata->curvline, BWTOPSTART);
        lline = gendata->curvline;

        /* And now print the first buffer. This part of
         * the code is identical to the LHDATA part in
         * print_color_page()
         */
        calcbufmargins(gendata, LEFT);
        gendata->ileave = 0;
        encode_bw_buf(gendata);
        lline = gendata->curvline;
        if(gendata->yres == 1200)
        {
                finalizeheader(gendata, 1, LEFT);
                gendata->ileave = 1;
                encode_bw_buf(gendata);
                lline++;
        }

        /* And now load another buffer, starting to
         * look for it from the first line after the
         * pass we have just done.
         */
        res = fill_mono_buffer(gendata, gendata->curvline + gendata->numblines);

        /* Now loop. Even this code is identical
         * to the code above: the only difference
         * is that here we also finalize the previous
         * buffer before encoding this one. No need
         * to check if the buffer is empty because
         * a buffer is reported only if it's full
         * or if it is the last one, so if it's not
         * the last it must be full.
         */
        while(!(res & LAST))
        {
                calcbufmargins(gendata, LEFT);
                finalizeheader(gendata, gendata->curvline - lline, LEFT);
                gendata->ileave = 0;
                encode_bw_buf(gendata);
                lline = gendata->curvline;
                if(gendata->yres == 1200)
                {
                        finalizeheader(gendata, 1, LEFT);
                        gendata->ileave = 1;
                        encode_bw_buf(gendata);
                        lline++;
                }

                /* Get another buffer, and so on */
                res = fill_mono_buffer(gendata, gendata->curvline + gendata->numblines);
        }

        /* Last buffer. This can be either empty or full.
         * If it's not empty (LHDATA bit set), print it.
         */
        if(res & LHDATA)
        {
                calcbufmargins(gendata, LEFT);
                finalizeheader(gendata, gendata->curvline - lline, LEFT);
                encode_bw_buf(gendata);
                if(gendata->yres == 1200)
                {
                        finalizeheader(gendata, 1, LEFT);
                        gendata->ileave = 1;
                        encode_bw_buf(gendata);
                        lline++;
                }
        }

        /* Finalize the last buffer */
        finalizeheader(gendata, 0, -1);
}

/* This is the equivalent of print_color_page()
 * for photoquality output. They are almost identical,
 * the only real difference is that we now are
 * printing with two identical heads, so there is
 * no need to care for different heights of the
 * printing pens (i.e.: no "lastblack" tricks).
 */
static int
print_photo_page(pagedata *gendata)
{
        int res, lline;

        res = init_buffer(gendata);
        while(res == 0)res = roll_buffer(gendata);

        if (res < 0)    {
            return res;
        }

        if(res == LAST)return 0;

        skiplines(gendata, gendata->curvline, COLTOPSTART);
        lline = gendata->curvline;

        switch(res)
        {
                case LHDATA:
                        calcbufmargins(gendata, LEFT);
                        gendata->ileave = 0;
                        encode_col_buf(gendata, LEFT);
                        lline = gendata->curvline;
                        if(gendata->yres == 1200)
                        {
                                finalizeheader(gendata, 1, LEFT);
                                gendata->ileave = 1;
                                encode_col_buf(gendata, LEFT);
                                lline++;
                        }
                        break;

                case RHDATA:
                        calcbufmargins(gendata, RIGHT);
                        gendata->ileave = 0;
                        encode_col_buf(gendata, RIGHT);
                        lline = gendata->curvline;
                        if(gendata->yres == 1200)
                        {
                                finalizeheader(gendata, 1, RIGHT);
                                gendata->ileave = 1;
                                encode_col_buf(gendata, RIGHT);
                                lline++;
                        }
                        break;

                case LHDATA|RHDATA:
                        calcbufmargins(gendata, LEFT);
                        gendata->ileave = 0;
                        encode_col_buf(gendata, LEFT);
                        calcbufmargins(gendata, RIGHT);
                        finalizeheader(gendata, 0, RIGHT);
                        encode_col_buf(gendata, RIGHT);
                        lline = gendata->curvline;
                        if(gendata->yres == 1200)
                        {
                                calcbufmargins(gendata, LEFT);
                                finalizeheader(gendata, 1, LEFT);
                                gendata->ileave = 1;
                                encode_col_buf(gendata, LEFT);
                                calcbufmargins(gendata, RIGHT);
                                finalizeheader(gendata, 0, RIGHT);
                                encode_col_buf(gendata, RIGHT);
                                lline++;
                        }

                        break;
        }

        res = roll_buffer(gendata);
        if (res < 0) {
            return res;
        }

        while(!(res & LAST))
        {
                switch(res)
                {
                        case LHDATA:
                                calcbufmargins(gendata, LEFT);
                                finalizeheader(gendata, gendata->curvline - lline, LEFT);
                                gendata->ileave = 0;
                                encode_col_buf(gendata, LEFT);
                                lline = gendata->curvline;
                                if(gendata->yres == 1200)
                                {
                                        finalizeheader(gendata, 1, LEFT);
                                        gendata->ileave = 1;
                                        encode_col_buf(gendata, LEFT);
                                        lline++;
                                }
                                break;

                        case RHDATA:
                                calcbufmargins(gendata, RIGHT);
                                finalizeheader(gendata, gendata->curvline - lline, RIGHT);
                                gendata->ileave = 0;
                                encode_col_buf(gendata, RIGHT);
                                lline = gendata->curvline;
                                if(gendata->yres == 1200)
                                {
                                        finalizeheader(gendata, 1, RIGHT);
                                        gendata->ileave = 1;
                                        encode_col_buf(gendata, RIGHT);
                                        lline++;
                                }
                                break;

                        case LHDATA|RHDATA:
                                calcbufmargins(gendata, LEFT);
                                finalizeheader(gendata, gendata->curvline - lline, LEFT);
                                gendata->ileave = 0;
                                encode_col_buf(gendata, LEFT);
                                calcbufmargins(gendata, RIGHT);
                                finalizeheader(gendata, 0, RIGHT);
                                encode_col_buf(gendata, RIGHT);
                                lline = gendata->curvline;
                                if(gendata->yres == 1200)
                                {
                                        calcbufmargins(gendata, LEFT);
                                        finalizeheader(gendata, 1, LEFT);
                                        gendata->ileave = 1;
                                        encode_col_buf(gendata, LEFT);
                                        calcbufmargins(gendata, RIGHT);
                                        finalizeheader(gendata, 0, RIGHT);
                                        encode_col_buf(gendata, RIGHT);
                                        lline++;
                                }
                                break;
                }

                res = roll_buffer(gendata);
                if (res < 0) {
                    return res;
                }
        }

        switch(res)
        {
                case LHDATA:
                        calcbufmargins(gendata, LEFT);
                        finalizeheader(gendata, gendata->curvline - lline, LEFT);
                        gendata->ileave = 0;
                        encode_col_buf(gendata, LEFT);
                        if(gendata->yres == 1200)
                        {
                                finalizeheader(gendata, 1, LEFT);
                                gendata->ileave = 1;
                                encode_col_buf(gendata, LEFT);
                                lline++;
                        }
                        break;

                case RHDATA:
                        calcbufmargins(gendata, RIGHT);
                        finalizeheader(gendata, gendata->curvline - lline, RIGHT);
                        gendata->ileave = 0;
                        encode_col_buf(gendata, RIGHT);
                        if(gendata->yres == 1200)
                        {
                                finalizeheader(gendata, 1, RIGHT);
                                gendata->ileave = 1;
                                encode_col_buf(gendata, RIGHT);
                                lline++;
                        }
                        break;

                case LHDATA|RHDATA:
                        calcbufmargins(gendata, LEFT);
                        finalizeheader(gendata, gendata->curvline - lline, LEFT);
                        gendata->ileave = 0;
                        encode_col_buf(gendata, LEFT);
                        calcbufmargins(gendata, RIGHT);
                        finalizeheader(gendata, 0, RIGHT);
                        encode_col_buf(gendata, RIGHT);
                        if(gendata->yres == 1200)
                        {
                                calcbufmargins(gendata, LEFT);
                                finalizeheader(gendata, 1, LEFT);
                                gendata->ileave = 1;
                                encode_col_buf(gendata, LEFT);
                                calcbufmargins(gendata, RIGHT);
                                finalizeheader(gendata, 0, RIGHT);
                                encode_col_buf(gendata, RIGHT);
                                lline++;
                        }
                        break;
        }

        finalizeheader(gendata, 0, -1);
        return 0;
}