summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJohan Herland <johan@herland.net>2013-10-11 14:57:07 +0200
committerEric Wong <normalperson@yhbt.net>2014-04-19 11:30:13 +0000
commitfe191fcaa58cb785c804465a0da9bcba9fd9e822 (patch)
tree34870aa374179b0300e0341899e7dee731a1ae1a
parentcc291953df19aa4a97bee3590e708dc1fc557500 (diff)
downloadgit-fe191fcaa58cb785c804465a0da9bcba9fd9e822.tar.gz
Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not given
git-svn by default puts its Subversion-tracking refs directly in refs/remotes/*. This runs counter to Git's convention of using refs/remotes/$remote/* for storing remote-tracking branches. Furthermore, combining git-svn with regular git remotes run the risk of clobbering refs under refs/remotes (e.g. if you have a git remote called "tags" with a "v1" branch, it will overlap with the git-svn's tracking branch for the "v1" tag from Subversion. Even though the git-svn refs stored in refs/remotes/* are not "proper" remote-tracking branches (since they are not covered by a proper git remote's refspec), they clearly represent a similar concept, and would benefit from following the same convention. For example, if git-svn tracks Subversion branch "foo" at refs/remotes/foo, and you create a local branch refs/heads/foo to add some commits to be pushed back to Subversion (using "git svn dcommit), then it is clearly unhelpful of Git to throw warning: refname 'foo' is ambiguous. every time you checkout, rebase, or otherwise interact with the branch. The existing workaround for this is to supply the --prefix=quux/ to git svn init/clone, so that git-svn's tracking branches end up in refs/remotes/quux/* instead of refs/remotes/*. However, encouraging users to specify --prefix to work around a design flaw in git-svn is suboptimal, and not a long term solution to the problem. Instead, git-svn should default to use a non-empty prefix that saves unsuspecting users from the inconveniences described above. This patch will only affect newly created git-svn setups, as the --prefix option only applies to git svn init (and git svn clone). Existing git-svn setups will continue with their existing (lack of) prefix. Also, if anyone somehow prefers git-svn's old layout, they can recreate that by explicitly passing an empty prefix (--prefix "") on the git svn init/clone command line. The patch changes the default value for --prefix from "" to "origin/", updates the git-svn manual page, and fixes the fallout in the git-svn testcases. (Note that this patch might be easier to review using the --word-diff and --word-diff-regex=. diff options.) [ew: squashed description of <= 1.9 behavior into manpage] Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Eric Wong <normalperson@yhbt.net>
-rw-r--r--Documentation/git-svn.txt20
-rwxr-xr-xgit-svn.perl12
-rwxr-xr-xt/t9107-git-svn-migrate.sh54
-rwxr-xr-xt/t9114-git-svn-dcommit-merge.sh4
-rwxr-xr-xt/t9116-git-svn-log.sh46
-rwxr-xr-xt/t9117-git-svn-init-clone.sh16
-rwxr-xr-xt/t9118-git-svn-funky-branch-names.sh20
-rwxr-xr-xt/t9120-git-svn-clone-with-percent-escapes.sh14
-rwxr-xr-xt/t9125-git-svn-multi-glob-branch-names.sh6
-rwxr-xr-xt/t9128-git-svn-cmd-branch.sh18
-rwxr-xr-xt/t9135-git-svn-moved-branch-empty-file.sh2
-rwxr-xr-xt/t9141-git-svn-multiple-branches.sh28
-rwxr-xr-xt/t9145-git-svn-master-branch.sh2
-rwxr-xr-xt/t9155-git-svn-fetch-deleted-tag.sh4
-rwxr-xr-xt/t9156-git-svn-fetch-deleted-tag-2.sh6
-rwxr-xr-xt/t9161-git-svn-mergeinfo-push.sh22
-rwxr-xr-xt/t9163-git-svn-reset-clears-caches.sh4
-rwxr-xr-xt/t9165-git-svn-fetch-merge-branch-of-branch.sh2
-rwxr-xr-xt/t9166-git-svn-fetch-merge-branch-of-branch2.sh2
-rwxr-xr-xt/t9167-git-svn-cmd-branch-subproject.sh2
20 files changed, 131 insertions, 153 deletions
diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt
index 30c5ee2564..5b3c38de7f 100644
--- a/Documentation/git-svn.txt
+++ b/Documentation/git-svn.txt
@@ -86,13 +86,11 @@ COMMANDS
(refs/remotes/$remote/*). Setting a prefix is also useful
if you wish to track multiple projects that share a common
repository.
+ By default, the prefix is set to 'origin/'.
+
-NOTE: In Git v2.0, the default prefix will CHANGE from "" (no prefix)
-to "origin/". This is done to put SVN-tracking refs at
-"refs/remotes/origin/*" instead of "refs/remotes/*", and make them
-more compatible with how Git's own remote-tracking refs are organized
-(i.e. refs/remotes/$remote/*). You can enjoy the same benefits today,
-by using the --prefix option.
+NOTE: Before Git v2.0, the default prefix was "" (no prefix). This
+meant that SVN-tracking refs were put at "refs/remotes/*", which is
+incompatible with how Git's own remote-tracking refs are organized.
--ignore-paths=<regex>;;
When passed to 'init' or 'clone' this regular expression will
@@ -994,16 +992,6 @@ without giving any repository layout options. If the full history with
branches and tags is required, the options '--trunk' / '--branches' /
'--tags' must be used.
-When using the options for describing the repository layout (--trunk,
---tags, --branches, --stdlayout), please also specify the --prefix
-option (e.g. '--prefix=origin/') to cause your SVN-tracking refs to be
-placed at refs/remotes/origin/* rather than the default refs/remotes/*.
-The former is more compatible with the layout of Git's "regular"
-remote-tracking refs (refs/remotes/$remote/*), and may potentially
-prevent similarly named SVN branches and Git remotes from clobbering
-each other. In Git v2.0 the default prefix used (i.e. when no --prefix
-is given) will change from "" (no prefix) to "origin/".
-
When using multiple --branches or --tags, 'git svn' does not automatically
handle name collisions (for example, if two branches from different paths have
the same name, or if a branch and a tag have the same name). In these cases,
diff --git a/git-svn.perl b/git-svn.perl
index 7349ffea5a..0a323722a6 100755
--- a/git-svn.perl
+++ b/git-svn.perl
@@ -1389,17 +1389,7 @@ sub cmd_multi_init {
usage(1);
}
- unless (defined $_prefix) {
- $_prefix = '';
- warn <<EOF
-WARNING: --prefix is not given, defaulting to empty prefix.
- This is probably not what you want! In order to stay compatible
- with regular remote-tracking refs, provide a prefix like
- --prefix=origin/ (remember the trailing slash), which will cause
- the SVN-tracking refs to be placed at refs/remotes/origin/*.
-NOTE: In Git v2.0, the default prefix will change from empty to 'origin/'.
-EOF
- }
+ $_prefix = 'origin/' unless defined $_prefix;
if (defined $url) {
$url = canonicalize_url($url);
init_subdir(@_);
diff --git a/t/t9107-git-svn-migrate.sh b/t/t9107-git-svn-migrate.sh
index ee73013eed..6e69fc4c65 100755
--- a/t/t9107-git-svn-migrate.sh
+++ b/t/t9107-git-svn-migrate.sh
@@ -45,27 +45,27 @@ test_expect_success 'initialize old-style (v0) git svn layout' '
test_expect_success 'initialize a multi-repository repo' '
git svn init "$svnrepo" -T trunk -t tags -b branches &&
git config --get-all svn-remote.svn.fetch > fetch.out &&
- grep "^trunk:refs/remotes/trunk$" fetch.out &&
+ grep "^trunk:refs/remotes/origin/trunk$" fetch.out &&
test -n "`git config --get svn-remote.svn.branches \
- "^branches/\*:refs/remotes/\*$"`" &&
+ "^branches/\*:refs/remotes/origin/\*$"`" &&
test -n "`git config --get svn-remote.svn.tags \
- "^tags/\*:refs/remotes/tags/\*$"`" &&
+ "^tags/\*:refs/remotes/origin/tags/\*$"`" &&
git config --unset svn-remote.svn.branches \
- "^branches/\*:refs/remotes/\*$" &&
+ "^branches/\*:refs/remotes/origin/\*$" &&
git config --unset svn-remote.svn.tags \
- "^tags/\*:refs/remotes/tags/\*$" &&
- git config --add svn-remote.svn.fetch "branches/a:refs/remotes/a" &&
- git config --add svn-remote.svn.fetch "branches/b:refs/remotes/b" &&
+ "^tags/\*:refs/remotes/origin/tags/\*$" &&
+ git config --add svn-remote.svn.fetch "branches/a:refs/remotes/origin/a" &&
+ git config --add svn-remote.svn.fetch "branches/b:refs/remotes/origin/b" &&
for i in tags/0.1 tags/0.2 tags/0.3; do
git config --add svn-remote.svn.fetch \
- $i:refs/remotes/$i || exit 1; done &&
+ $i:refs/remotes/origin/$i || exit 1; done &&
git config --get-all svn-remote.svn.fetch > fetch.out &&
- grep "^trunk:refs/remotes/trunk$" fetch.out &&
- grep "^branches/a:refs/remotes/a$" fetch.out &&
- grep "^branches/b:refs/remotes/b$" fetch.out &&
- grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out &&
- grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out &&
- grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out &&
+ grep "^trunk:refs/remotes/origin/trunk$" fetch.out &&
+ grep "^branches/a:refs/remotes/origin/a$" fetch.out &&
+ grep "^branches/b:refs/remotes/origin/b$" fetch.out &&
+ grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out &&
+ grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out &&
+ grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out &&
grep "^:refs/${remotes_git_svn}" fetch.out
'
@@ -73,14 +73,14 @@ test_expect_success 'initialize a multi-repository repo' '
test_expect_success 'multi-fetch works on partial urls + paths' "
git svn multi-fetch &&
for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do
- git rev-parse --verify refs/remotes/\$i^0 >> refs.out || exit 1;
+ git rev-parse --verify refs/remotes/origin/\$i^0 >> refs.out || exit 1;
done &&
test -z \"\`sort < refs.out | uniq -d\`\" &&
for i in trunk a b tags/0.1 tags/0.2 tags/0.3; do
for j in trunk a b tags/0.1 tags/0.2 tags/0.3; do
if test \$j != \$i; then continue; fi
- test -z \"\`git diff refs/remotes/\$i \
- refs/remotes/\$j\`\" ||exit 1; done; done
+ test -z \"\`git diff refs/remotes/origin/\$i \
+ refs/remotes/origin/\$j\`\" ||exit 1; done; done
"
test_expect_success 'migrate --minimize on old inited layout' '
@@ -98,27 +98,27 @@ test_expect_success 'migrate --minimize on old inited layout' '
git svn migrate --minimize &&
test -z "`git config -l | grep "^svn-remote\.git-svn\."`" &&
git config --get-all svn-remote.svn.fetch > fetch.out &&
- grep "^trunk:refs/remotes/trunk$" fetch.out &&
- grep "^branches/a:refs/remotes/a$" fetch.out &&
- grep "^branches/b:refs/remotes/b$" fetch.out &&
- grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out &&
- grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out &&
- grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out &&
+ grep "^trunk:refs/remotes/origin/trunk$" fetch.out &&
+ grep "^branches/a:refs/remotes/origin/a$" fetch.out &&
+ grep "^branches/b:refs/remotes/origin/b$" fetch.out &&
+ grep "^tags/0\.1:refs/remotes/origin/tags/0\.1$" fetch.out &&
+ grep "^tags/0\.2:refs/remotes/origin/tags/0\.2$" fetch.out &&
+ grep "^tags/0\.3:refs/remotes/origin/tags/0\.3$" fetch.out &&
grep "^:refs/${remotes_git_svn}" fetch.out
'
test_expect_success ".rev_db auto-converted to .rev_map.UUID" '
git svn fetch -i trunk &&
- test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" &&
- expect="$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_map.*)" &&
+ test -z "$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db.* 2>/dev/null)" &&
+ expect="$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_map.*)" &&
test -n "$expect" &&
rev_db="$(echo $expect | sed -e "s,_map,_db,")" &&
convert_to_rev_db "$expect" "$rev_db" &&
rm -f "$expect" &&
test -f "$rev_db" &&
git svn fetch -i trunk &&
- test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" &&
- test ! -e "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db &&
+ test -z "$(ls "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db.* 2>/dev/null)" &&
+ test ! -e "$GIT_DIR"/svn/refs/remotes/origin/trunk/.rev_db &&
test -f "$expect"
'
diff --git a/t/t9114-git-svn-dcommit-merge.sh b/t/t9114-git-svn-dcommit-merge.sh
index d33d714006..fb41876677 100755
--- a/t/t9114-git-svn-dcommit-merge.sh
+++ b/t/t9114-git-svn-dcommit-merge.sh
@@ -48,7 +48,7 @@ test_expect_success 'setup svn repository' '
test_expect_success 'setup git mirror and merge' '
git svn init "$svnrepo" -t tags -T trunk -b branches &&
git svn fetch &&
- git checkout -b svn remotes/trunk &&
+ git checkout -b svn remotes/origin/trunk &&
git checkout -b merge &&
echo new file > new_file &&
git add new_file &&
@@ -81,7 +81,7 @@ test_debug 'gitk --all & sleep 1'
test_expect_success 'verify post-merge ancestry' "
test x\`git rev-parse --verify refs/heads/svn\` = \
- x\`git rev-parse --verify refs/remotes/trunk \` &&
+ x\`git rev-parse --verify refs/remotes/origin/trunk \` &&
test x\`git rev-parse --verify refs/heads/svn^2\` = \
x\`git rev-parse --verify refs/heads/merge\` &&
git cat-file commit refs/heads/svn^ | grep '^friend$'
diff --git a/t/t9116-git-svn-log.sh b/t/t9116-git-svn-log.sh
index cf4c05261b..45773ee560 100755
--- a/t/t9116-git-svn-log.sh
+++ b/t/t9116-git-svn-log.sh
@@ -20,20 +20,20 @@ test_expect_success 'setup repository and import' '
) &&
git svn init "$svnrepo" -T trunk -b branches -t tags &&
git svn fetch &&
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
echo bye >> README &&
git commit -a -m bye &&
git svn dcommit &&
- git reset --hard a &&
+ git reset --hard origin/a &&
echo why >> FEEDME &&
git update-index --add FEEDME &&
git commit -m feedme &&
git svn dcommit &&
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
echo aye >> README &&
git commit -a -m aye &&
git svn dcommit &&
- git reset --hard b &&
+ git reset --hard origin/b &&
echo spy >> README &&
git commit -a -m spy &&
echo try >> README &&
@@ -42,26 +42,26 @@ test_expect_success 'setup repository and import' '
'
test_expect_success 'run log' "
- git reset --hard a &&
- git svn log -r2 trunk | grep ^r2 &&
- git svn log -r4 trunk | grep ^r4 &&
+ git reset --hard origin/a &&
+ git svn log -r2 origin/trunk | grep ^r2 &&
+ git svn log -r4 origin/trunk | grep ^r4 &&
git svn log -r3 | grep ^r3
"
test_expect_success 'run log against a from trunk' "
- git reset --hard trunk &&
- git svn log -r3 a | grep ^r3
+ git reset --hard origin/trunk &&
+ git svn log -r3 origin/a | grep ^r3
"
printf 'r1 \nr2 \nr4 \n' > expected-range-r1-r2-r4
test_expect_success 'test ascending revision range' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 1:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2-r4 -
"
test_expect_success 'test ascending revision range with --show-commit' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log --show-commit -r 1:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2-r4 -
"
@@ -69,7 +69,7 @@ test_expect_success 'test ascending revision range with --show-commit (sha1)' "
git svn find-rev r1 >expected-range-r1-r2-r4-sha1 &&
git svn find-rev r2 >>expected-range-r1-r2-r4-sha1 &&
git svn find-rev r4 >>expected-range-r1-r2-r4-sha1 &&
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log --show-commit -r 1:4 | grep '^r[0-9]' | cut -d'|' -f2 >out &&
git rev-parse \$(cat out) >actual &&
test_cmp expected-range-r1-r2-r4-sha1 actual
@@ -78,67 +78,67 @@ test_expect_success 'test ascending revision range with --show-commit (sha1)' "
printf 'r4 \nr2 \nr1 \n' > expected-range-r4-r2-r1
test_expect_success 'test descending revision range' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 4:1 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4-r2-r1 -
"
printf 'r1 \nr2 \n' > expected-range-r1-r2
test_expect_success 'test ascending revision range with unreachable revision' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 1:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r1-r2 -
"
printf 'r2 \nr1 \n' > expected-range-r2-r1
test_expect_success 'test descending revision range with unreachable revision' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 3:1 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r2-r1 -
"
printf 'r2 \n' > expected-range-r2
test_expect_success 'test ascending revision range with unreachable upper boundary revision and 1 commit' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 2:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r2 -
"
test_expect_success 'test descending revision range with unreachable upper boundary revision and 1 commit' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 3:2 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r2 -
"
printf 'r4 \n' > expected-range-r4
test_expect_success 'test ascending revision range with unreachable lower boundary revision and 1 commit' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 3:4 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 -
"
test_expect_success 'test descending revision range with unreachable lower boundary revision and 1 commit' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 4:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 -
"
printf -- '------------------------------------------------------------------------\n' > expected-separator
test_expect_success 'test ascending revision range with unreachable boundary revisions and no commits' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 5:6 | test_cmp expected-separator -
"
test_expect_success 'test descending revision range with unreachable boundary revisions and no commits' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 6:5 | test_cmp expected-separator -
"
test_expect_success 'test ascending revision range with unreachable boundary revisions and 1 commit' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 3:5 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 -
"
test_expect_success 'test descending revision range with unreachable boundary revisions and 1 commit' "
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn log -r 5:3 | grep '^r[0-9]' | cut -d'|' -f1 | test_cmp expected-range-r4 -
"
diff --git a/t/t9117-git-svn-init-clone.sh b/t/t9117-git-svn-init-clone.sh
index 69e9c0db5d..dfed76fedc 100755
--- a/t/t9117-git-svn-init-clone.sh
+++ b/t/t9117-git-svn-init-clone.sh
@@ -83,25 +83,25 @@ EOF
rm -f expect actual
}
-test_expect_success 'init with -s/-T/-b/-t without --prefix warns' '
+test_expect_success 'init with -s/-T/-b/-t assumes --prefix=origin/' '
test ! -d project &&
git svn init -s "$svnrepo"/project project 2>warning &&
- grep -q prefix warning &&
- test_svn_configured_prefix "" &&
+ test_must_fail grep -q prefix warning &&
+ test_svn_configured_prefix "origin/" &&
rm -rf project &&
rm -f warning
'
-test_expect_success 'clone with -s/-T/-b/-t without --prefix warns' '
+test_expect_success 'clone with -s/-T/-b/-t assumes --prefix=origin/' '
test ! -d project &&
git svn clone -s "$svnrepo"/project 2>warning &&
- grep -q prefix warning &&
- test_svn_configured_prefix "" &&
+ test_must_fail grep -q prefix warning &&
+ test_svn_configured_prefix "origin/" &&
rm -rf project &&
rm -f warning
'
-test_expect_success 'init with -s/-T/-b/-t and --prefix does not warn' '
+test_expect_success 'init with -s/-T/-b/-t and --prefix="" still works' '
test ! -d project &&
git svn init -s "$svnrepo"/project project --prefix="" 2>warning &&
test_must_fail grep -q prefix warning &&
@@ -110,7 +110,7 @@ test_expect_success 'init with -s/-T/-b/-t and --prefix does not warn' '
rm -f warning
'
-test_expect_success 'clone with -s/-T/-b/-t and --prefix does not warn' '
+test_expect_success 'clone with -s/-T/-b/-t and --prefix="" still works' '
test ! -d project &&
git svn clone -s "$svnrepo"/project --prefix="" 2>warning &&
test_must_fail grep -q prefix warning &&
diff --git a/t/t9118-git-svn-funky-branch-names.sh b/t/t9118-git-svn-funky-branch-names.sh
index 15f93b4c28..ed4d1369cc 100755
--- a/t/t9118-git-svn-funky-branch-names.sh
+++ b/t/t9118-git-svn-funky-branch-names.sh
@@ -41,20 +41,20 @@ test_expect_success 'test clone with funky branch names' '
git svn clone -s "$svnrepo/pr ject" project &&
(
cd project &&
- git rev-parse "refs/remotes/fun%20plugin" &&
- git rev-parse "refs/remotes/more%20fun%20plugin!" &&
- git rev-parse "refs/remotes/$scary_ref" &&
- git rev-parse "refs/remotes/%2Eleading_dot" &&
- git rev-parse "refs/remotes/trailing_dot%2E" &&
- git rev-parse "refs/remotes/trailing_dotlock%2Elock" &&
- git rev-parse "refs/remotes/$non_reflog"
+ git rev-parse "refs/remotes/origin/fun%20plugin" &&
+ git rev-parse "refs/remotes/origin/more%20fun%20plugin!" &&
+ git rev-parse "refs/remotes/origin/$scary_ref" &&
+ git rev-parse "refs/remotes/origin/%2Eleading_dot" &&
+ git rev-parse "refs/remotes/origin/trailing_dot%2E" &&
+ git rev-parse "refs/remotes/origin/trailing_dotlock%2Elock" &&
+ git rev-parse "refs/remotes/origin/$non_reflog"
)
'
test_expect_success 'test dcommit to funky branch' "
(
cd project &&
- git reset --hard 'refs/remotes/more%20fun%20plugin!' &&
+ git reset --hard 'refs/remotes/origin/more%20fun%20plugin!' &&
echo hello >> foo &&
git commit -m 'hello' -- foo &&
git svn dcommit
@@ -64,7 +64,7 @@ test_expect_success 'test dcommit to funky branch' "
test_expect_success 'test dcommit to scary branch' '
(
cd project &&
- git reset --hard "refs/remotes/$scary_ref" &&
+ git reset --hard "refs/remotes/origin/$scary_ref" &&
echo urls are scary >> foo &&
git commit -m "eep" -- foo &&
git svn dcommit
@@ -74,7 +74,7 @@ test_expect_success 'test dcommit to scary branch' '
test_expect_success 'test dcommit to trailing_dotlock branch' '
(
cd project &&
- git reset --hard "refs/remotes/trailing_dotlock%2Elock" &&
+ git reset --hard "refs/remotes/origin/trailing_dotlock%2Elock" &&
echo who names branches like this anyway? >> foo &&
git commit -m "bar" -- foo &&
git svn dcommit
diff --git a/t/t9120-git-svn-clone-with-percent-escapes.sh b/t/t9120-git-svn-clone-with-percent-escapes.sh
index 1d92c05035..1c84ce1023 100755
--- a/t/t9120-git-svn-clone-with-percent-escapes.sh
+++ b/t/t9120-git-svn-clone-with-percent-escapes.sh
@@ -58,19 +58,19 @@ test_expect_success 'test clone --stdlayout with percent escapes' '
git svn clone --stdlayout "$svnrepo/pr%20ject" percent &&
(
cd percent &&
- git rev-parse refs/remotes/trunk^0 &&
- git rev-parse refs/remotes/b^0 &&
- git rev-parse refs/remotes/tags/v1^0
+ git rev-parse refs/remotes/origin/trunk^0 &&
+ git rev-parse refs/remotes/origin/b^0 &&
+ git rev-parse refs/remotes/origin/tags/v1^0
)
'
test_expect_success 'test clone -s with unescaped space' '
- git svn clone -s "$svnrepo/pr ject" space &&
+ git svn clone -s "$svnrepo/pr ject" --prefix origin/ space &&
(
cd space &&
- git rev-parse refs/remotes/trunk^0 &&
- git rev-parse refs/remotes/b^0 &&
- git rev-parse refs/remotes/tags/v1^0
+ git rev-parse refs/remotes/origin/trunk^0 &&
+ git rev-parse refs/remotes/origin/b^0 &&
+ git rev-parse refs/remotes/origin/tags/v1^0
)
'
diff --git a/t/t9125-git-svn-multi-glob-branch-names.sh b/t/t9125-git-svn-multi-glob-branch-names.sh
index 096abd1fe5..0d53fc9014 100755
--- a/t/t9125-git-svn-multi-glob-branch-names.sh
+++ b/t/t9125-git-svn-multi-glob-branch-names.sh
@@ -20,14 +20,14 @@ test_expect_success 'test clone with multi-glob in branch names' '
git svn clone -T trunk -b branches/*/* -t tags \
"$svnrepo/project" project &&
(cd project &&
- git rev-parse "refs/remotes/v14.1/beta" &&
- git rev-parse "refs/remotes/v14.1/gold"
+ git rev-parse "refs/remotes/origin/v14.1/beta" &&
+ git rev-parse "refs/remotes/origin/v14.1/gold"
)
'
test_expect_success 'test dcommit to multi-globbed branch' "
(cd project &&
- git reset --hard 'refs/remotes/v14.1/gold' &&
+ git reset --hard 'refs/remotes/origin/v14.1/gold' &&
echo hello >> foo &&
git commit -m 'hello' -- foo &&
git svn dcommit
diff --git a/t/t9128-git-svn-cmd-branch.sh b/t/t9128-git-svn-cmd-branch.sh
index 4b034a67f3..4e95f791db 100755
--- a/t/t9128-git-svn-cmd-branch.sh
+++ b/t/t9128-git-svn-cmd-branch.sh
@@ -29,30 +29,30 @@ test_expect_success 'initialize svnrepo' '
test_expect_success 'import into git' '
git svn init --stdlayout "$svnrepo" &&
git svn fetch &&
- git checkout remotes/trunk
+ git checkout remotes/origin/trunk
'
test_expect_success 'git svn branch tests' '
git svn branch a &&
base=$(git rev-parse HEAD:) &&
- test $base = $(git rev-parse remotes/a:) &&
+ test $base = $(git rev-parse remotes/origin/a:) &&
git svn branch -m "created branch b blah" b &&
- test $base = $(git rev-parse remotes/b:) &&
+ test $base = $(git rev-parse remotes/origin/b:) &&
test_must_fail git branch -m "no branchname" &&
git svn branch -n c &&
- test_must_fail git rev-parse remotes/c &&
+ test_must_fail git rev-parse remotes/origin/c &&
test_must_fail git svn branch a &&
git svn branch -t tag1 &&
- test $base = $(git rev-parse remotes/tags/tag1:) &&
+ test $base = $(git rev-parse remotes/origin/tags/tag1:) &&
git svn branch --tag tag2 &&
- test $base = $(git rev-parse remotes/tags/tag2:) &&
+ test $base = $(git rev-parse remotes/origin/tags/tag2:) &&
git svn tag tag3 &&
- test $base = $(git rev-parse remotes/tags/tag3:) &&
+ test $base = $(git rev-parse remotes/origin/tags/tag3:) &&
git svn tag -m "created tag4 foo" tag4 &&
- test $base = $(git rev-parse remotes/tags/tag4:) &&
+ test $base = $(git rev-parse remotes/origin/tags/tag4:) &&
test_must_fail git svn tag -m "no tagname" &&
git svn tag -n tag5 &&
- test_must_fail git rev-parse remotes/tags/tag5 &&
+ test_must_fail git rev-parse remotes/origin/tags/tag5 &&
test_must_fail git svn tag tag1
'
diff --git a/t/t9135-git-svn-moved-branch-empty-file.sh b/t/t9135-git-svn-moved-branch-empty-file.sh
index 5280e5f1e4..93db45db7d 100755
--- a/t/t9135-git-svn-moved-branch-empty-file.sh
+++ b/t/t9135-git-svn-moved-branch-empty-file.sh
@@ -12,7 +12,7 @@ test_expect_success 'clone using git svn' 'git svn clone -s "$svnrepo" x'
test_expect_success 'test that b1 exists and is empty' '
(
cd x &&
- git reset --hard branch-c &&
+ git reset --hard origin/branch-c &&
test -f b1 &&
! test -s b1
)
diff --git a/t/t9141-git-svn-multiple-branches.sh b/t/t9141-git-svn-multiple-branches.sh
index 3cd06718eb..8e7f7d68b7 100755
--- a/t/t9141-git-svn-multiple-branches.sh
+++ b/t/t9141-git-svn-multiple-branches.sh
@@ -66,18 +66,18 @@ test_expect_success 'clone multiple branch and tag paths' '
-t tags_A/* --tags tags_B \
"$svnrepo/project" git_project &&
( cd git_project &&
- git rev-parse refs/remotes/first &&
- git rev-parse refs/remotes/second &&
- git rev-parse refs/remotes/1 &&
- git rev-parse refs/remotes/2 &&
- git rev-parse refs/remotes/tags/1.0 &&
- git rev-parse refs/remotes/tags/2.0 &&
- git rev-parse refs/remotes/tags/3.0 &&
- git rev-parse refs/remotes/tags/4.0 &&
- git rev-parse refs/remotes/tags/v5 &&
- git rev-parse refs/remotes/tags/v6 &&
- git rev-parse refs/remotes/tags/v7 &&
- git rev-parse refs/remotes/tags/v8
+ git rev-parse refs/remotes/origin/first &&
+ git rev-parse refs/remotes/origin/second &&
+ git rev-parse refs/remotes/origin/1 &&
+ git rev-parse refs/remotes/origin/2 &&
+ git rev-parse refs/remotes/origin/tags/1.0 &&
+ git rev-parse refs/remotes/origin/tags/2.0 &&
+ git rev-parse refs/remotes/origin/tags/3.0 &&
+ git rev-parse refs/remotes/origin/tags/4.0 &&
+ git rev-parse refs/remotes/origin/tags/v5 &&
+ git rev-parse refs/remotes/origin/tags/v6 &&
+ git rev-parse refs/remotes/origin/tags/v7 &&
+ git rev-parse refs/remotes/origin/tags/v8
)
'
@@ -85,8 +85,8 @@ test_expect_success 'Multiple branch or tag paths require -d' '
( cd git_project &&
test_must_fail git svn branch -m "No new branch" Nope &&
test_must_fail git svn tag -m "No new tag" Tagless &&
- test_must_fail git rev-parse refs/remotes/Nope &&
- test_must_fail git rev-parse refs/remotes/tags/Tagless
+ test_must_fail git rev-parse refs/remotes/origin/Nope &&
+ test_must_fail git rev-parse refs/remotes/origin/tags/Tagless
) &&
( cd svn_project &&
svn_cmd up &&
diff --git a/t/t9145-git-svn-master-branch.sh b/t/t9145-git-svn-master-branch.sh
index 16852d26ae..6559137493 100755
--- a/t/t9145-git-svn-master-branch.sh
+++ b/t/t9145-git-svn-master-branch.sh
@@ -17,7 +17,7 @@ test_expect_success 'git svn clone --stdlayout sets up trunk as master' '
git svn clone -s "$svnrepo" g &&
(
cd g &&
- test x`git rev-parse --verify refs/remotes/trunk^0` = \
+ test x`git rev-parse --verify refs/remotes/origin/trunk^0` = \
x`git rev-parse --verify refs/heads/master^0`
)
'
diff --git a/t/t9155-git-svn-fetch-deleted-tag.sh b/t/t9155-git-svn-fetch-deleted-tag.sh
index a486a98f84..184336f346 100755
--- a/t/t9155-git-svn-fetch-deleted-tag.sh
+++ b/t/t9155-git-svn-fetch-deleted-tag.sh
@@ -35,8 +35,8 @@ test_expect_success 'fetch deleted tags from same revision with checksum error'
cd git_project &&
git svn fetch &&
- git diff --exit-code mybranch:trunk/subdir/file tags/mytag:file &&
- git diff --exit-code master:subdir/file tags/mytag^:file
+ git diff --exit-code origin/mybranch:trunk/subdir/file origin/tags/mytag:file &&
+ git diff --exit-code master:subdir/file origin/tags/mytag^:file
'
test_done
diff --git a/t/t9156-git-svn-fetch-deleted-tag-2.sh b/t/t9156-git-svn-fetch-deleted-tag-2.sh
index 5ce7e2f3b0..7a6e33ba3c 100755
--- a/t/t9156-git-svn-fetch-deleted-tag-2.sh
+++ b/t/t9156-git-svn-fetch-deleted-tag-2.sh
@@ -36,9 +36,9 @@ test_expect_success 'fetch deleted tags from same revision with no checksum erro
cd git_project &&
git svn fetch &&
- git diff --exit-code master:subdir3/file tags/mytag:file &&
- git diff --exit-code master:subdir2/file tags/mytag^:file &&
- git diff --exit-code master:subdir1/file tags/mytag^^:file
+ git diff --exit-code master:subdir3/file origin/tags/mytag:file &&
+ git diff --exit-code master:subdir2/file origin/tags/mytag^:file &&
+ git diff --exit-code master:subdir1/file origin/tags/mytag^^:file
'
test_done
diff --git a/t/t9161-git-svn-mergeinfo-push.sh b/t/t9161-git-svn-mergeinfo-push.sh
index 1eab7015c7..6cb0909afe 100755
--- a/t/t9161-git-svn-mergeinfo-push.sh
+++ b/t/t9161-git-svn-mergeinfo-push.sh
@@ -18,8 +18,8 @@ test_expect_success 'load svn dump' "
test_expect_success 'propagate merge information' '
git config svn.pushmergeinfo yes &&
- git checkout svnb1 &&
- git merge --no-ff svnb2 &&
+ git checkout origin/svnb1 &&
+ git merge --no-ff origin/svnb2 &&
git svn dcommit
'
@@ -29,7 +29,7 @@ test_expect_success 'check svn:mergeinfo' '
'
test_expect_success 'merge another branch' '
- git merge --no-ff svnb3 &&
+ git merge --no-ff origin/svnb3 &&
git svn dcommit
'
@@ -40,7 +40,7 @@ test_expect_success 'check primary parent mergeinfo respected' '
'
test_expect_success 'merge existing merge' '
- git merge --no-ff svnb4 &&
+ git merge --no-ff origin/svnb4 &&
git svn dcommit
'
@@ -53,7 +53,7 @@ test_expect_success "check both parents' mergeinfo respected" '
'
test_expect_success 'make further commits to branch' '
- git checkout svnb2 &&
+ git checkout origin/svnb2 &&
touch newb2file &&
git add newb2file &&
git commit -m "later b2 commit" &&
@@ -64,8 +64,8 @@ test_expect_success 'make further commits to branch' '
'
test_expect_success 'second forward merge' '
- git checkout svnb1 &&
- git merge --no-ff svnb2 &&
+ git checkout origin/svnb1 &&
+ git merge --no-ff origin/svnb2 &&
git svn dcommit
'
@@ -78,8 +78,8 @@ test_expect_success 'check new mergeinfo added' '
'
test_expect_success 'reintegration merge' '
- git checkout svnb4 &&
- git merge --no-ff svnb1 &&
+ git checkout origin/svnb4 &&
+ git merge --no-ff origin/svnb1 &&
git svn dcommit
'
@@ -92,11 +92,11 @@ test_expect_success 'check reintegration mergeinfo' '
'
test_expect_success 'dcommit a merge at the top of a stack' '
- git checkout svnb1 &&
+ git checkout origin/svnb1 &&
touch anotherfile &&
git add anotherfile &&
git commit -m "a commit" &&
- git merge svnb4 &&
+ git merge origin/svnb4 &&
git svn dcommit
'
diff --git a/t/t9163-git-svn-reset-clears-caches.sh b/t/t9163-git-svn-reset-clears-caches.sh
index cd4c662ba2..d6245cee08 100755
--- a/t/t9163-git-svn-reset-clears-caches.sh
+++ b/t/t9163-git-svn-reset-clears-caches.sh
@@ -70,9 +70,9 @@ test_expect_success 'rebase looses SVN merge (m)' '
#
test_expect_success 'reset and fetch gets the SVN merge (m) correctly' '
git svn reset -r 3 &&
- git reset --hard trunk &&
+ git reset --hard origin/trunk &&
git svn fetch &&
- test 2 = $(git cat-file -p trunk|grep parent|wc -l)
+ test 2 = $(git cat-file -p origin/trunk|grep parent|wc -l)
'
test_done
diff --git a/t/t9165-git-svn-fetch-merge-branch-of-branch.sh b/t/t9165-git-svn-fetch-merge-branch-of-branch.sh
index 13ae7e33f9..fa3ef3b1f7 100755
--- a/t/t9165-git-svn-fetch-merge-branch-of-branch.sh
+++ b/t/t9165-git-svn-fetch-merge-branch-of-branch.sh
@@ -53,7 +53,7 @@ test_expect_success 'clone svn repo' '
'
test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) &&
- y=$(git rev-parse branch2) &&
+ y=$(git rev-parse origin/branch2) &&
test "x$x" = "x$y"
'
diff --git a/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh b/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh
index af0ec0e2e3..52f2e46a5b 100755
--- a/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh
+++ b/t/t9166-git-svn-fetch-merge-branch-of-branch2.sh
@@ -46,7 +46,7 @@ test_expect_success 'clone svn repo' '
'
test_expect_success 'verify merge commit' 'x=$(git rev-parse HEAD^2) &&
- y=$(git rev-parse branch2) &&
+ y=$(git rev-parse origin/branch2) &&
test "x$x" = "x$y"
'
diff --git a/t/t9167-git-svn-cmd-branch-subproject.sh b/t/t9167-git-svn-cmd-branch-subproject.sh
index 53def876ed..ba35fc06fc 100755
--- a/t/t9167-git-svn-cmd-branch-subproject.sh
+++ b/t/t9167-git-svn-cmd-branch-subproject.sh
@@ -31,7 +31,7 @@ test_expect_success 'import into git' '
git svn init --trunk=trunk/project --branches=branches/*/project \
--tags=tags/*/project "$svnrepo" &&
git svn fetch &&
- git checkout remotes/trunk
+ git checkout remotes/origin/trunk
'
test_expect_success 'git svn branch tests' '