Moving Pgbouncer HA documentation out of database documentationdocs-move-pgbouncer-ha-docs-out-of-db-docs

2 files changed, 83 insertions, 83 deletions

diff --git a/doc/administration/high_availability/database.md b/doc/administration/high_availability/database.md
index c32a73080ff..0db9985acd9 100644
--- a/doc/administration/high_availability/database.md
+++ b/doc/administration/high_availability/database.md
@@ -478,88 +478,7 @@ Check the [Troubleshooting section](#troubleshooting) before proceeding.
 
 #### Configuring the Pgbouncer node
 
-1. Make sure you collect [`CONSUL_SERVER_NODES`](#consul-information), [`CONSUL_PASSWORD_HASH`](#consul-information), and [`PGBOUNCER_PASSWORD_HASH`](#pgbouncer-information) before executing the next step.
-
-1. Edit `/etc/gitlab/gitlab.rb` replacing values noted in the `# START user configuration` section:
-
-    ```ruby
-    # Disable all components except Pgbouncer and Consul agent
-    roles ['pgbouncer_role']
-
-    # Configure Pgbouncer
-    pgbouncer['admin_users'] = %w(pgbouncer gitlab-consul)
-
-    # Configure Consul agent
-    consul['watchers'] = %w(postgresql)
-
-    # START user configuration
-    # Please set the real values as explained in Required Information section
-    # Replace CONSUL_PASSWORD_HASH with with a generated md5 value
-    # Replace PGBOUNCER_PASSWORD_HASH with with a generated md5 value
-    pgbouncer['users'] = {
-      'gitlab-consul': {
-        password: 'CONSUL_PASSWORD_HASH'
-      },
-      'pgbouncer': {
-        password: 'PGBOUNCER_PASSWORD_HASH'
-      }
-    }
-    # Replace placeholders:
-    #
-    # Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z
-    # with the addresses gathered for CONSUL_SERVER_NODES
-    consul['configuration'] = {
-      retry_join: %w(Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z)
-    }
-    #
-    # END user configuration
-    ```
-
-    > `pgbouncer_role` was introduced with GitLab 10.3
-
-1. [Reconfigure GitLab] for the changes to take effect.
-
-1. Create a `.pgpass` file so Consul is able to
-   reload pgbouncer. Enter the `PGBOUNCER_PASSWORD` twice when asked:
-
-    ```sh
-    gitlab-ctl write-pgpass --host 127.0.0.1 --database pgbouncer --user pgbouncer --hostuser gitlab-consul
-    ```
-
-##### PGBouncer Checkpoint
-
-1. Ensure the node is talking to the current master:
-
-    ```sh
-    gitlab-ctl pgb-console # You will be prompted for PGBOUNCER_PASSWORD
-    ```
-
-    If there is an error `psql: ERROR:  Auth failed` after typing in the
-    password, ensure you previously generated the MD5 password hashes with the correct
-    format. The correct format is to concatenate the password and the username:
-    `PASSWORDUSERNAME`. For example, `Sup3rS3cr3tpgbouncer` would be the text
-    needed to generate an MD5 password hash for the `pgbouncer` user.
-
-1. Once the console prompt is available, run the following queries:
-
-    ```sh
-    show databases ; show clients ;
-    ```
-
-    The output should be similar to the following:
-
-    ```
-            name         |  host       | port |      database       | force_user | pool_size | reserve_pool | pool_mode | max_connections | current_connections
-    ---------------------+-------------+------+---------------------+------------+-----------+--------------+-----------+-----------------+---------------------
-     gitlabhq_production | MASTER_HOST | 5432 | gitlabhq_production |            |        20 |            0 |           |               0 |                   0
-     pgbouncer           |             | 6432 | pgbouncer           | pgbouncer  |         2 |            0 | statement |               0 |                   0
-    (2 rows)
-
-     type |   user    |      database       |  state  |   addr         | port  | local_addr | local_port |    connect_time     |    request_time     |    ptr    | link | remote_pid | tls
-    ------+-----------+---------------------+---------+----------------+-------+------------+------------+---------------------+---------------------+-----------+------+------------+-----
-     C    | pgbouncer | pgbouncer           | active  | 127.0.0.1      | 56846 | 127.0.0.1  |       6432 | 2017-08-21 18:09:59 | 2017-08-21 18:10:48 | 0x22b3880 |      |          0 |
-    (2 rows)
-    ```
+See our [documentation for Pgbouncer](pgbouncer.md) for information on running Pgbouncer as part of an HA setup.
 
 #### Configuring the Application nodes
 
diff --git a/doc/administration/high_availability/pgbouncer.md b/doc/administration/high_availability/pgbouncer.md
index 053dae25823..2788b087628 100644
--- a/doc/administration/high_availability/pgbouncer.md
+++ b/doc/administration/high_availability/pgbouncer.md
@@ -14,7 +14,88 @@ It is recommended to run pgbouncer alongside the `gitlab-rails` service, or on i
 
 ### Running Pgbouncer as part of an HA GitLab installation
 
-See our [HA documentation for PostgreSQL](database.md) for information on running pgbouncer as part of a HA setup
+1. Make sure you collect [`CONSUL_SERVER_NODES`](database.md#consul-information), [`CONSUL_PASSWORD_HASH`](database.md#consul-information), and [`PGBOUNCER_PASSWORD_HASH`](database.md#pgbouncer-information) before executing the next step.
+
+1. Edit `/etc/gitlab/gitlab.rb` replacing values noted in the `# START user configuration` section:
+
+    ```ruby
+    # Disable all components except Pgbouncer and Consul agent
+    roles ['pgbouncer_role']
+
+    # Configure Pgbouncer
+    pgbouncer['admin_users'] = %w(pgbouncer gitlab-consul)
+
+    # Configure Consul agent
+    consul['watchers'] = %w(postgresql)
+
+    # START user configuration
+    # Please set the real values as explained in Required Information section
+    # Replace CONSUL_PASSWORD_HASH with with a generated md5 value
+    # Replace PGBOUNCER_PASSWORD_HASH with with a generated md5 value
+    pgbouncer['users'] = {
+      'gitlab-consul': {
+        password: 'CONSUL_PASSWORD_HASH'
+      },
+      'pgbouncer': {
+        password: 'PGBOUNCER_PASSWORD_HASH'
+      }
+    }
+    # Replace placeholders:
+    #
+    # Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z
+    # with the addresses gathered for CONSUL_SERVER_NODES
+    consul['configuration'] = {
+      retry_join: %w(Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z)
+    }
+    #
+    # END user configuration
+    ```
+
+    > `pgbouncer_role` was introduced with GitLab 10.3
+
+1.  Run `gitlab-ctl reconfigure`
+
+1. Create a `.pgpass` file so Consul is able to
+   reload pgbouncer. Enter the `PGBOUNCER_PASSWORD` twice when asked:
+
+    ```sh
+    gitlab-ctl write-pgpass --host 127.0.0.1 --database pgbouncer --user pgbouncer --hostuser gitlab-consul
+    ```
+
+#### PGBouncer Checkpoint
+
+1. Ensure the node is talking to the current master:
+
+    ```sh
+    gitlab-ctl pgb-console # You will be prompted for PGBOUNCER_PASSWORD
+    ```
+
+    If there is an error `psql: ERROR:  Auth failed` after typing in the
+    password, ensure you previously generated the MD5 password hashes with the correct
+    format. The correct format is to concatenate the password and the username:
+    `PASSWORDUSERNAME`. For example, `Sup3rS3cr3tpgbouncer` would be the text
+    needed to generate an MD5 password hash for the `pgbouncer` user.
+
+1. Once the console prompt is available, run the following queries:
+
+    ```sh
+    show databases ; show clients ;
+    ```
+
+    The output should be similar to the following:
+
+    ```
+            name         |  host       | port |      database       | force_user | pool_size | reserve_pool | pool_mode | max_connections | current_connections
+    ---------------------+-------------+------+---------------------+------------+-----------+--------------+-----------+-----------------+---------------------
+     gitlabhq_production | MASTER_HOST | 5432 | gitlabhq_production |            |        20 |            0 |           |               0 |                   0
+     pgbouncer           |             | 6432 | pgbouncer           | pgbouncer  |         2 |            0 | statement |               0 |                   0
+    (2 rows)
+
+     type |   user    |      database       |  state  |   addr         | port  | local_addr | local_port |    connect_time     |    request_time     |    ptr    | link | remote_pid | tls
+    ------+-----------+---------------------+---------+----------------+-------+------------+------------+---------------------+---------------------+-----------+------+------------+-----
+     C    | pgbouncer | pgbouncer           | active  | 127.0.0.1      | 56846 | 127.0.0.1  |       6432 | 2017-08-21 18:09:59 | 2017-08-21 18:10:48 | 0x22b3880 |      |          0 |
+    (2 rows)
+    ```
 
 ### Running Pgbouncer as part of a non-HA GitLab installation