path: root/config.guess

#! /bin/sh
#
# GMP config.guess wrapper.


# Copyright 2000-2019 Free Software Foundation, Inc.
#
#  This file is part of the GNU MP Library.
#
#  The GNU MP Library is free software; you can redistribute it and/or modify
#  it under the terms of either:
#
#    * the GNU Lesser General Public License as published by the Free
#      Software Foundation; either version 3 of the License, or (at your
#      option) any later version.
#
#  or
#
#    * the GNU General Public License as published by the Free Software
#      Foundation; either version 2 of the License, or (at your option) any
#      later version.
#
#  or both in parallel, as here.
#
#  The GNU MP Library is distributed in the hope that it will be useful, but
#  WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
#  or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
#  for more details.
#
#  You should have received copies of the GNU General Public License and the
#  GNU Lesser General Public License along with the GNU MP Library.  If not,
#  see https://www.gnu.org/licenses/.


# Usage: config.guess
#
# Print the host system CPU-VENDOR-OS.
#
# configfsf.guess is run and its guess then sharpened up to take advantage
# of the finer grained CPU types that GMP knows.


# Expect to find configfsf.guess in the same directory as this config.guess
configfsf_guess="`echo \"$0\" | sed 's/config.guess$/configfsf.guess/'`"
if test "$configfsf_guess" = "$0"; then
  echo "Cannot derive configfsf.guess from $0" 1>&2
  exit 1
fi
if test -f "$configfsf_guess"; then
  :
else
  echo "$configfsf_guess not found" 1>&2
  exit 1
fi

# Setup a $SHELL with which to run configfsf.guess, using the same
# $CONFIG_SHELL or /bin/sh as autoconf does when running config.guess
SHELL=${CONFIG_SHELL-/bin/sh}

# Identify ourselves on --version, --help or errors
if test $# != 0; then
  echo "(GNU MP wrapped config.guess)"
  $SHELL $configfsf_guess "$@"
  exit 1
fi

guess_full=`$SHELL $configfsf_guess`
if test $? != 0; then
  exit 1
fi

guess_cpu=`echo "$guess_full" | sed 's/-.*$//'`
guess_rest=`echo "$guess_full" | sed 's/^[^-]*//'`
exact_cpu=


# -------------------------------------------------------------------------
# The following should look at the current guess and probe the system to
# establish a better guess in exact_cpu.  Leave exact_cpu empty if probes
# can't be done, or don't work.
#
# When a number of probes are done, test -z "$exact_cpu" can be used instead
# of putting each probe under an "else" of the preceeding.  That can stop
# the code getting horribly nested and marching off the right side of the
# screen.

# Note that when a compile-and-link is done in one step we need to remove .o
# files, since lame C compilers generate these even when not asked.
#

# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.

# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.

# Portable tmp directory creation inspired by the Autoconf team.

set_cc_for_build='
trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
: ${TMPDIR=/tmp} ;
 { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
 { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
 { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
 { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
dummy=$tmp/dummy ;
tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy $dummy.core ${dummy}0.s" ;
case $CC_FOR_BUILD,$HOST_CC,$CC in
 ,,)    echo "int x;" > $dummy.c ;
	for c in cc gcc c89 c99 ; do
	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
	     CC_FOR_BUILD="$c"; break ;
	  fi ;
	done ;
	if test x"$CC_FOR_BUILD" = x ; then
	  CC_FOR_BUILD=no_compiler_found ;
	fi
	;;
 ,,*)   CC_FOR_BUILD=$CC ;;
 ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
esac ; set_cc_for_build= ;'


case "$guess_full" in

alpha-*-*)
  eval $set_cc_for_build
  # configfsf.guess detects exact alpha cpu types for OSF and GNU/Linux, but
  # not for *BSD and other systems.  We try to get an exact type for any
  # plain "alpha" it leaves.
  #
  # configfsf.guess used to have a block of code not unlike this, but these
  # days does its thing with Linux kernel /proc/cpuinfo or OSF psrinfo.
  #
  cat <<EOF >${dummy}0.s
	.data
Lformat:
	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
	.text
	.globl main
	.align 4
	.ent main
main:
	.frame \$30,16,\$26,0
	ldgp \$29,0(\$27)
	.prologue 1
	.long 0x47e03d91 # implver \$17
	lda \$2,-1
	.long 0x47e20c21 # amask \$2,\$1
	lda \$16,Lformat
	not \$1,\$18
	jsr \$26,printf
	ldgp \$29,0(\$26)
	mov 0,\$16
	jsr \$26,exit
	.end main
EOF
  $CC_FOR_BUILD ${dummy}0.s -o $dummy 2>/dev/null
  if test "$?" = 0 ; then
    case `$dummy` in
    0-0)	exact_cpu=alpha      ;;
    1-0)	exact_cpu=alphaev5   ;;
    1-1)	exact_cpu=alphaev56  ;;
    1-101)	exact_cpu=alphapca56 ;;
    2-303)	exact_cpu=alphaev6   ;;
    2-307)	exact_cpu=alphaev67  ;;
    2-1307)	exact_cpu=alphaev68  ;;
    esac
  fi
  ;;

arm*-*-* | aarch64-*-*)
  if [ $( (uname -s) 2>/dev/null) = Darwin ]; then
      case $(system_profiler SPHardwareDataType | grep Chip) in
	  *Apple\ M1)
	    exact_cpu="applem1";;
	  *Apple\ M2)
	    exact_cpu="applem2";;
      esac
  fi

  cpu_code=`sed -n 's/^CPU part.*\(0x.*\)$/\1/p' /proc/cpuinfo 2>/dev/null | sort -r | head -n 1 2>/dev/null`
  cpu_implementer=`sed -n 's/^CPU implementer.*\(0x.*\)$/\1/p' /proc/cpuinfo 2>/dev/null | head -n 1 2>/dev/null`
  case "${cpu_implementer}_${cpu_code}" in
    0x53_0x001) exact_cpu=armexynosm1  ;;
    0x51_0x800) exact_cpu=armcortexa57 ;;
    0x43_0x0a1) exact_cpu=armthunderx  ;;
    0x50_0x000) exact_cpu=armxgene1    ;;
    0x61_0x023) exact_cpu=applem1      ;;
  esac
  if test -z "$exact_cpu"; then
    case "$cpu_code" in
	0xa10 | 0xa11 | 0xb11)			# v4 strongarm/sa1100
		exact_cpu="armsa1";;
	0x915 | 0x925 | \
	0x920 | 0x922 | 0x940)			# v4
		exact_cpu="arm9tdmi";;
	0x210 | 0x290 | 0x2d0 | \
	0x212 | 0x292 | 0x2d2 | \
	0x411)	exact_cpu="armxscale";;		# v5 pxa2xx
	0x926 | 0x946 | 0x966 | 0x968)		# v5te/v5tej
		exact_cpu="arm9te";;
	0xa20 | 0xa22 | 0xa26)			# v5te
		exact_cpu="arm10";;
	0xb02)	exact_cpu="arm11mpcore";;	# v6
	0xb36)	exact_cpu="arm1136";;		# v6
	0xb56)	exact_cpu="arm1156";;		# v6t2
	0xb76)	exact_cpu="arm1176";;		# v6
	0xc05)	exact_cpu="armcortexa5";;	# v7a
	0xc07)	exact_cpu="armcortexa7";;	# v7a
	0xc08)	exact_cpu="armcortexa8";;	# v7a
	0xc09)	exact_cpu="armcortexa9";;	# v7a
	0xc0f)	exact_cpu="armcortexa15";;	# v7a
	0xc0d)	exact_cpu="armcortexa12";;	# v7a
	0xc0e)	exact_cpu="armcortexa17";;	# v7a
	0xc14)	exact_cpu="armcortexr4";;	# v7r
	0xc15)	exact_cpu="armcortexr5";;	# v7r
	0xc23)	exact_cpu="armcortexm3";;	# v7m

	0xd04)	exact_cpu="armcortexa35";;	# v8
	0xd03)	exact_cpu="armcortexa53";;	# v8
	0xd05)	exact_cpu="armcortexa55";;	# v8.2
	0xd07)	exact_cpu="armcortexa57";;	# v8
	0xd08)	exact_cpu="armcortexa72";;	# v8
	0xd09)	exact_cpu="armcortexa73";;	# v8
	0xd0a)	exact_cpu="armcortexa75";;	# v8.2
	0xd0b)	exact_cpu="armcortexa76";;	# v8.3
	*)	exact_cpu=$guess_cpu;;
    esac
  fi
  exact_cpu="${exact_cpu}`sed -n 's;^Features.*\(neon\).*;\1;p' /proc/cpuinfo 2>/dev/null | head -n 1 2>/dev/null`"
  ;;

ia64*-*-*)
  eval $set_cc_for_build
  # CPUID[3] bits 24 to 31 is the processor family.  itanium2 is documented
  # as 0x1f, plain itanium has been seen returning 0x07 on two systems, but
  # haven't found any documentation on it as such.
  #
  # Defining both getcpuid and _getcpuid lets us ignore whether the system
  # expects underscores or not.
  #
  # "unsigned long long" is always 64 bits, in fact on hpux in ilp32 mode
  # (which is the default there), it's the only 64-bit type.
  #
  cat >${dummy}0.s <<EOF
	.text
	.global	_getcpuid
	.proc	_getcpuid
_getcpuid:
	mov	r8 = CPUID[r32] ;;
	br.ret.sptk.many rp ;;
	.endp	_getcpuid
	.global	getcpuid
	.proc	getcpuid
getcpuid:
	mov	r8 = CPUID[r32] ;;
	br.ret.sptk.many rp ;;
	.endp	getcpuid
EOF
  cat >$dummy.c <<EOF
#include <stdio.h>
unsigned long long getcpuid ();
int
main ()
{
  if (getcpuid(0LL) == 0x49656E69756E6547LL && getcpuid(1LL) == 0x6C65746ELL)
    {
      /* "GenuineIntel" */
      switch ((getcpuid(3LL) >> 24) & 0xFF) {
      case 0x07: puts ("itanium");  break;
      case 0x1F: puts ("itanium2"); break; /* McKinley, Madison */
      case 0x20: puts ("itanium2"); break; /* Montecito, Montvale, Tukwila */
      case 0x21: puts ("itanium2"); break; /* Poulson */
      }
    }
  return 0;
}
EOF
  if $CC_FOR_BUILD ${dummy}0.s $dummy.c -o $dummy >/dev/null 2>&1; then
    exact_cpu=`$dummy`
  fi
  ;;

mips-*-irix[6789]*)
  # IRIX 6 and up always has a 64-bit mips cpu
  exact_cpu=mips64
  ;;

mips-*-*)
  case $(uname -m) in
    mips64)	exact_cpu=mips64;;
  esac
  ;;

mipsel-*-*)
  case $(uname -m) in
    mips64)	exact_cpu=mips64el;;
  esac
  ;;

m68k-*-*)
  eval $set_cc_for_build
  # NetBSD (and presumably other *BSD) "sysctl hw.model" gives for example
  #   hw.model = Apple Macintosh Quadra 610  (68040)
  exact_cpu=`(sysctl hw.model) 2>/dev/null | sed -n 's/^.*\(680[012346]0\).*$/m\1/p'`
  if test -z "$exact_cpu"; then
    # Linux kernel 2.2 gives for example "CPU: 68020" (tabs in between).
    exact_cpu=`sed -n 's/^CPU:.*\(680[012346]0\).*$/m\1/p' /proc/cpuinfo 2>/dev/null`
  fi
  if test -z "$exact_cpu"; then
    # Try: movel #0,%d0; rts
    # This is to check the compiler and our asm code works etc, before
    # assuming failures below indicate cpu characteristics.
    # .byte is used to avoid problems with assembler syntax variations.
    # For testing, provoke failures by adding "illegal" possibly as
    # ".byte 0x4A, 0xFC"
    cat >${dummy}0.s <<EOF
	.text
	.globl main
	.globl _main
main:
_main:
	.byte	0x70, 0x00
	.byte	0x4e, 0x75
EOF

    if ($CC_FOR_BUILD ${dummy}0.s -o $dummy && $dummy) >/dev/null 2>&1; then

      # $SHELL -c is used to execute $dummy below, since ($dummy)
      # 2>/dev/null still prints the SIGILL message on some shells.
      #
        # Try: movel #0,%d0
        #      rtd #0
        cat >${dummy}0.s <<EOF
	.text
	.globl main
	.globl _main
main:
_main:
	.byte	0x70, 0x00
	.byte	0x4e, 0x74, 0x00, 0x00
EOF
        if $CC_FOR_BUILD ${dummy}0.s -o $dummy >/dev/null 2>&1; then
          $SHELL -c $dummy >/dev/null 2>&1
	  if test $? != 0; then
            exact_cpu=m68000    # because rtd didn't work
          fi
        fi
      #

      if test -z "$exact_cpu"; then
        # Try: trapf
        #      movel #0,%d0
        #      rts
        # Another possibility for identifying 68000 and 68010 is the
        # different value stored by "movem a0,(a0)+"
        cat >${dummy}0.s <<EOF
	.text
	.globl main
	.globl _main
main:
_main:
	.byte	0x51, 0xFC
	.byte	0x70, 0x00
	.byte	0x4e, 0x75
EOF
        if $CC_FOR_BUILD ${dummy}0.s -o $dummy >/dev/null 2>&1; then
          $SHELL -c $dummy >/dev/null 2>&1
	  if test $? != 0; then
            exact_cpu=m68010    # because trapf didn't work
          fi
        fi
      fi

      if test -z "$exact_cpu"; then
        # Try: bfffo %d1{0:31},%d0
        #      movel #0,%d0
        #      rts
        cat >${dummy}0.s <<EOF
	.text
	.globl main
	.globl _main
main:
_main:
	.byte	0xED, 0xC1, 0x00, 0x1F
	.byte	0x70, 0x00
	.byte	0x4e, 0x75
EOF
        if $CC_FOR_BUILD ${dummy}0.s -o $dummy >/dev/null 2>&1; then
          $SHELL -c $dummy >/dev/null 2>&1
	  if test $? != 0; then
            exact_cpu=m68360  # cpu32, because bfffo didn't work
          fi
        fi
      fi

      if test -z "$exact_cpu"; then
        # FIXME: Now we know 68020 or up, but how to detect 030, 040 and 060?
        exact_cpu=m68020
      fi
    fi
  fi
  if test -z "$exact_cpu"; then
    case "$guess_full" in
      *-*-next* | *-*-openstep*)  # NeXTs are 68020 or better
        exact_cpu=m68020 ;;
    esac
  fi
  ;;


rs6000-*-* | powerpc*-*-*)
  # Enhancement: On MacOS the "machine" command prints for instance
  # "ppc750".  Interestingly on powerpc970-apple-darwin6.8.5 it prints
  # "ppc970" where there's no actual #define for 970 from NXGetLocalArchInfo
  # (as noted below).  But the man page says the command is still "under
  # development", so it doesn't seem wise to use it just yet, not while
  # there's an alternative.

  # Try to read the PVR.  mfpvr is a protected instruction, NetBSD, MacOS and
  # AIX don't allow it in user mode, but the Linux kernel does.  We prefer this
  # to /proc/cpuinfo since the latter lags for newer CPUs.
  #
  # Note this is no good on AIX, since a C function there is the address of
  # a function descriptor, not actual code.  But this doesn't matter since
  # AIX doesn't allow mfpvr anyway.
  #
  if test -z "$exact_cpu"; then
    eval $set_cc_for_build
    cat >$dummy.c <<\EOF
#include <stdio.h>
int
main ()
{
  unsigned  pvr;

  asm ("mfpvr	%0" : "=r" (pvr));

  switch (pvr >> 16) {
  case 0x0001: puts ("powerpc601");  break;
  case 0x0003: puts ("powerpc603");  break;
  case 0x0004: puts ("powerpc604");  break;
  case 0x0006: puts ("powerpc603e"); break;
  case 0x0007: puts ("powerpc603e"); break;  /* 603ev */
  case 0x0008: puts ("powerpc750");  break;
  case 0x0009: puts ("powerpc604e"); break;
  case 0x000a: puts ("powerpc604e"); break;  /* 604ev5 */
  case 0x000c: puts ("powerpc7400"); break;
  case 0x0041: puts ("powerpc630");  break;
  case 0x003f: puts ("power7");      break;
  case 0x004b:
  case 0x004c:
  case 0x004d: puts ("power8");      break;
  case 0x004e: puts ("power9");      break;
  case 0x0050: puts ("powerpc860");  break;
  case 0x8000: puts ("powerpc7450"); break;
  case 0x8001: puts ("powerpc7455"); break;
  case 0x8002: puts ("powerpc7457"); break;
  case 0x8003: puts ("powerpc7447"); break; /* really 7447A */
  case 0x800c: puts ("powerpc7410"); break;
  }
  return 0;
}
EOF
    if ($CC_FOR_BUILD $dummy.c -o $dummy) >/dev/null 2>&1; then
      # This style construct is needed on AIX 4.3 to suppress the SIGILL error
      # from (*fun)().  Using $SHELL -c $dummy 2>/dev/null doesn't work.
      { x=`$dummy`; } 2>/dev/null
      if test -n "$x"; then
	exact_cpu=$x
      fi
    fi
  fi


  # Grep the /proc/cpuinfo pseudo-file.
  # Anything unrecognised is ignored, since of course we mustn't spit out
  # a cpu type config.sub doesn't know.
  if test -z "$exact_cpu" && test -f /proc/cpuinfo; then
    x=`grep "^cpu[ 	]" /proc/cpuinfo | head -n 1`
    x=`echo $x | sed -n 's/^cpu[ 	]*:[ 	]*\([A-Za-z0-9]*\).*/\1/p'`
    x=`echo $x | sed 's/PPC//'`
    case $x in
      601)     exact_cpu="power" ;;
      603ev)   exact_cpu="powerpc603e" ;;
      604ev5)  exact_cpu="powerpc604e" ;;
      970??)   exact_cpu="powerpc970" ;;
      603 | 603e | 604 | 604e | 750 | 821 | 860)
        exact_cpu="powerpc$x" ;;
      POWER[4-9]*)
        exact_cpu=`echo $x | sed -e "s;POWER;power;" -e "s;[a-zA-Z]*$;;"` ;;
    esac
  fi


  if test -z "$exact_cpu"; then
    # On AIX, try looking at _system_configuration.  This is present in
    # version 4 at least.
    cat >$dummy.c <<EOF
#include <stdio.h>
#include <sys/systemcfg.h>
int
main ()
{
  switch (_system_configuration.implementation) {
  /* Old versions of AIX don't have all these constants,
     use ifdef for safety. */
#ifdef POWER_RS2
  case POWER_RS2:    puts ("power2");     break;
#endif
#ifdef POWER_601
  case POWER_601:    puts ("power");      break;
#endif
#ifdef POWER_603
  case POWER_603:    puts ("powerpc603"); break;
#endif
#ifdef POWER_604
  case POWER_604:    puts ("powerpc604"); break;
#endif
#ifdef POWER_620
  case POWER_620:    puts ("powerpc620"); break;
#endif
#ifdef POWER_630
  case POWER_630:    puts ("powerpc630"); break;
#endif
  /* Dunno what this is, leave it out for now.
  case POWER_A35:    puts ("powerpca35"); break;
  */
  /* This is waiting for a bit more info.
  case POWER_RS64II: puts ("powerpcrs64ii"); break;
  */
#ifdef POWER_4
  case POWER_4:    puts ("power4"); break;
#endif
#ifdef POWER_5
  case POWER_5:    puts ("power5"); break;
#endif
#ifdef POWER_6
  case POWER_6:    puts ("power6"); break;
#endif
#ifdef POWER_7
  case POWER_7:    puts ("power7"); break;
#endif
#ifdef POWER_8
  case POWER_8:    puts ("power8"); break;
#endif
#ifdef POWER_9
  case POWER_9:    puts ("power9"); break;
#endif
  default:
    if (_system_configuration.architecture == POWER_RS)
      puts ("power");
    else if (_system_configuration.width == 64)
      puts ("powerpc64");
  }
  return 0;
}
EOF
    if ($CC_FOR_BUILD $dummy.c -o $dummy) >/dev/null 2>&1; then
      x=`$dummy`
      if test -n "$x"; then
        exact_cpu=$x
      fi
    fi
  fi

  if test -z "$exact_cpu"; then
    # On MacOS X (or any Mach-O presumably), NXGetLocalArchInfo cpusubtype
    # can tell us the exact cpu.
    cat >$dummy.c <<EOF
#include <stdio.h>
#include <mach-o/arch.h>
int
main (void)
{
  const NXArchInfo *a = NXGetLocalArchInfo();
  if (a->cputype == CPU_TYPE_POWERPC)
    {
      switch (a->cpusubtype) {
      /* The following known to Darwin 1.3. */
      case CPU_SUBTYPE_POWERPC_601:   puts ("powerpc601");  break;
      case CPU_SUBTYPE_POWERPC_602:   puts ("powerpc602");  break;
      case CPU_SUBTYPE_POWERPC_603:   puts ("powerpc603");  break;
      case CPU_SUBTYPE_POWERPC_603e:  puts ("powerpc603e"); break;
      case CPU_SUBTYPE_POWERPC_603ev: puts ("powerpc603e"); break;
      case CPU_SUBTYPE_POWERPC_604:   puts ("powerpc604");  break;
      case CPU_SUBTYPE_POWERPC_604e:  puts ("powerpc604e"); break;
      case CPU_SUBTYPE_POWERPC_620:   puts ("powerpc620");  break;
      case CPU_SUBTYPE_POWERPC_750:   puts ("powerpc750");  break;
      case CPU_SUBTYPE_POWERPC_7400:  puts ("powerpc7400"); break;
      case CPU_SUBTYPE_POWERPC_7450:  puts ("powerpc7450"); break;
      /* Darwin 6.8.5 doesn't define the following */
      case 0x8001:                    puts ("powerpc7455"); break;
      case 0x8002:                    puts ("powerpc7457"); break;
      case 0x8003:                    puts ("powerpc7447"); break;
      case 100:                       puts ("powerpc970");  break;
      }
    }
  return 0;
}
EOF
    if ($CC_FOR_BUILD $dummy.c -o $dummy) >/dev/null 2>&1; then
      x=`$dummy`
      if test -n "$x"; then
        exact_cpu=$x
      fi
    fi
  fi
  ;;

sparc-*-* | sparc64-*-*)
  # If we can recognise an actual v7 then $exact_cpu is set to "sparc" so as
  # to short-circuit subsequent tests.

  # Grep the linux kernel /proc/cpuinfo pseudo-file.
  # A typical line is "cpu\t\t: TI UltraSparc II  (BlackBird)"
  # See arch/sparc/kernel/cpu.c and arch/sparc64/kernel/cpu.c.
  #
  if test -f /proc/cpuinfo; then
    if grep 'cpu.*Cypress' /proc/cpuinfo >/dev/null; then
      exact_cpu="sparc"   # ie. v7
    elif grep 'cpu.*Power-UP' /proc/cpuinfo >/dev/null; then
      exact_cpu="sparc"   # ie. v7
    elif grep 'cpu.*HyperSparc' /proc/cpuinfo >/dev/null; then
      exact_cpu="sparcv8"
    elif grep 'cpu.*SuperSparc' /proc/cpuinfo >/dev/null; then
      exact_cpu="supersparc"
    elif grep 'cpu.*MicroSparc' /proc/cpuinfo >/dev/null; then
      exact_cpu="microsparc"
    elif grep 'cpu.*MB86904' /proc/cpuinfo >/dev/null; then
      # actually MicroSPARC-II
      exact_cpu=microsparc
    elif grep 'cpu.*UltraSparc T5' /proc/cpuinfo >/dev/null; then
      exact_cpu="ultrasparct5"
    elif grep 'cpu.*UltraSparc T4' /proc/cpuinfo >/dev/null; then
      exact_cpu="ultrasparct4"
    elif grep 'cpu.*UltraSparc T3' /proc/cpuinfo >/dev/null; then
      exact_cpu="ultrasparct3"
    elif grep 'cpu.*UltraSparc T2' /proc/cpuinfo >/dev/null; then
      exact_cpu="ultrasparct2"
    elif grep 'cpu.*UltraSparc T1' /proc/cpuinfo >/dev/null; then
      exact_cpu="ultrasparct1"
    elif grep 'cpu.*UltraSparc III' /proc/cpuinfo >/dev/null; then
      exact_cpu="ultrasparc3"
    elif grep 'cpu.*UltraSparc IIi' /proc/cpuinfo >/dev/null; then
      exact_cpu="ultrasparc2i"
    elif grep 'cpu.*UltraSparc II' /proc/cpuinfo >/dev/null; then
      exact_cpu="ultrasparc2"
    elif grep 'cpu.*UltraSparc' /proc/cpuinfo >/dev/null; then
      exact_cpu="ultrasparc"
    fi
  fi

  # Need to invoke this for setup of $dummy
  eval $set_cc_for_build

  # Grep the output from sysinfo on SunOS.
  # sysinfo has been seen living in /bin or in /usr/kvm
  #	cpu0 is a "SuperSPARC Model 41 SPARCmodule" CPU
  #	cpu0 is a "75 MHz TI,TMS390Z55" CPU
  #
  if test -z "$exact_cpu"; then
    for i in sysinfo /usr/kvm/sysinfo; do
      if $SHELL -c $i 2>/dev/null >$dummy; then
        if grep 'cpu0 is a "SuperSPARC' $dummy >/dev/null; then
          exact_cpu=supersparc
          break
        elif grep 'cpu0 is a .*TMS390Z5.' $dummy >/dev/null; then
          # TMS390Z50 and TMS390Z55
          exact_cpu=supersparc
          break
        fi
      fi
    done
  fi

  # Grep the output from prtconf on Solaris.
  # Use an explicit /usr/sbin, since that directory might not be in a normal
  # user's path.
  #
  #     SUNW,UltraSPARC (driver not attached)
  #     SUNW,UltraSPARC-II (driver not attached)
  #     SUNW,UltraSPARC-IIi (driver not attached)
  #     SUNW,UltraSPARC-III+ (driver not attached)
  #     Ross,RT625 (driver not attached)
  #     TI,TMS390Z50 (driver not attached)
  #
  # /usr/sbin/sysdef prints similar information, but includes all loadable
  # cpu modules, not just the real cpu.
  #
  # We first try a plain prtconf, since that is known to work on older systems.
  # But for newer T1 systems, that doesn't produce any useful output, we need
  # "prtconf -vp" there.
  #
  for prtconfopt in "" "-vp"; do
    if test -z "$exact_cpu"; then
      if $SHELL -c "/usr/sbin/prtconf $prtconfopt" 2>/dev/null >$dummy; then
	if grep 'SUNW,UltraSPARC-T5' $dummy >/dev/null; then
	  exact_cpu=ultrasparct5
	elif grep 'SUNW,UltraSPARC-T4' $dummy >/dev/null; then
	  exact_cpu=ultrasparct4
	elif grep 'SUNW,UltraSPARC-T3' $dummy >/dev/null; then
	  exact_cpu=ultrasparct3
	elif grep 'SUNW,UltraSPARC-T2' $dummy >/dev/null; then
	  exact_cpu=ultrasparct2
	elif grep 'SUNW,UltraSPARC-T1' $dummy >/dev/null; then
	  exact_cpu=ultrasparct1
	elif grep 'SUNW,UltraSPARC-III' $dummy >/dev/null; then
	  exact_cpu=ultrasparc3
	elif grep 'SUNW,UltraSPARC-IIi' $dummy >/dev/null; then
	  exact_cpu=ultrasparc2i
	elif grep 'SUNW,UltraSPARC-II' $dummy >/dev/null; then
	  exact_cpu=ultrasparc2
	elif grep 'SUNW,UltraSPARC' $dummy >/dev/null; then
	  exact_cpu=ultrasparc
	elif grep 'Ross,RT62.' $dummy >/dev/null; then
	  # RT620, RT625, RT626 hypersparcs (v8).
	  exact_cpu=sparcv8
	elif grep 'TI,TMS390Z5.' $dummy >/dev/null; then
	  # TMS390Z50 and TMS390Z55
	  exact_cpu=supersparc
	elif grep 'TI,TMS390S10' $dummy >/dev/null; then
	  exact_cpu=microsparc
	elif grep 'FMI,MB86904' $dummy >/dev/null; then
	  # actually MicroSPARC-II
	  exact_cpu=microsparc
	fi
      fi
    fi
  done

  # Grep the output from sysctl hw.model on sparc or sparc64 *BSD.
  # Use an explicit /sbin, since that directory might not be in a normal
  # user's path.  Example outputs,
  #
  #     hw.model: Sun Microsystems UltraSparc-IIi
  #
  if test -z "$exact_cpu"; then
    if $SHELL -c "/sbin/sysctl hw.model" 2>/dev/null >$dummy; then
      if grep -i 'UltraSparc-T5' $dummy >/dev/null; then
        exact_cpu=ultrasparct5
      elif grep -i 'UltraSparc-T4' $dummy >/dev/null; then
        exact_cpu=ultrasparct4
      elif grep -i 'UltraSparc-T3' $dummy >/dev/null; then
        exact_cpu=ultrasparct3
      elif grep -i 'UltraSparc-T2' $dummy >/dev/null; then
        exact_cpu=ultrasparct2
      elif grep -i 'UltraSparc-T1' $dummy >/dev/null; then
        exact_cpu=ultrasparct1
      elif grep -i 'UltraSparc-III' $dummy >/dev/null; then
        exact_cpu=ultrasparc3
      elif grep -i 'UltraSparc-IIi' $dummy >/dev/null; then
        exact_cpu=ultrasparc2i
      elif grep -i 'UltraSparc-II' $dummy >/dev/null; then
        exact_cpu=ultrasparc2
      elif grep -i 'UltraSparc' $dummy >/dev/null; then
        exact_cpu=ultrasparc
      elif grep 'TMS390Z5.' $dummy >/dev/null; then
        # TMS390Z50 and TMS390Z55
        exact_cpu=supersparc
      elif grep 'TMS390S10' $dummy >/dev/null; then
        exact_cpu=microsparc
      elif grep 'MB86904' $dummy >/dev/null; then
        # actually MicroSPARC-II
        exact_cpu=microsparc
      elif grep 'MB86907' $dummy >/dev/null; then
        exact_cpu=turbosparc
      fi
    fi
  fi

  # sun4m and sun4d are v8s of some sort, sun4u is a v9 of some sort
  #
  if test -z "$exact_cpu"; then
    case `uname -m` in
      sun4[md]) exact_cpu=sparcv8 ;;
      sun4u)    exact_cpu=sparcv9 ;;
    esac
  fi
  ;;


# Recognise x86 processors using a tricky cpuid with 4 arguments, repeating
# arguments; for x86-64 we effectively pass the 1st in rdx and the 2nd in rcx.
# This allows the same asm to work for both standard and Windoze calling
# conventions.

i?86-*-* | amd64-*-* | x86_64-*-*)
  eval $set_cc_for_build

  cat <<EOF >$dummy.c
#include <string.h>
#include <stdio.h>
#define CPUID(a,b) cpuid(b,a,a,b)
#if __cplusplus
extern "C"
#endif
unsigned int cpuid (int, char *, char *, int);

int
gmp_workaround_skylake_cpuid_bug ()
{
  char feature_string[49];
  char processor_name_string[49];
  static const char *bad_cpus[] = {" G44", " G45", " G39" /* , "6600" */ };
  int i;

  /* Example strings:                                   */
  /* "Intel(R) Pentium(R) CPU G4400 @ 3.30GHz"          */
  /* "Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz"         */
  /*                  ^               ^               ^ */
  /*     0x80000002       0x80000003      0x80000004    */
  /* We match out just the 0x80000003 part here. */

  /* In their infinitive wisdom, Intel decided to use one register order for
     the vendor string, and another for the processor name string.  We shuffle
     things about here, rather than write a new variant of our assembly cpuid.
  */

  unsigned int eax, ebx, ecx, edx;
  eax = CPUID (feature_string, 0x80000003);
  ebx = ((unsigned int *)feature_string)[0];
  edx = ((unsigned int *)feature_string)[1];
  ecx = ((unsigned int *)feature_string)[2];

  ((unsigned int *) (processor_name_string))[0] = eax;
  ((unsigned int *) (processor_name_string))[1] = ebx;
  ((unsigned int *) (processor_name_string))[2] = ecx;
  ((unsigned int *) (processor_name_string))[3] = edx;

  processor_name_string[16] = 0;

  for (i = 0; i < sizeof (bad_cpus) / sizeof (char *); i++)
    {
      if (strstr (processor_name_string, bad_cpus[i]) != 0)
	return 1;
    }
  return 0;
}

int
main ()
{
  char vendor_string[13];
  char feature_string[12];
  long fms;
  int family, model;
  const char *modelstr, *suffix;
  int cpu_64bit = 0, cpu_avx = 0;
  int cpuid_64bit, cpuid_avx, cpuid_osxsave;

  CPUID (vendor_string, 0);
  vendor_string[12] = 0;

  fms = CPUID (feature_string, 1);

  family = ((fms >> 8) & 0xf) + ((fms >> 20) & 0xff);
  model = ((fms >> 4) & 0xf) + ((fms >> 12) & 0xf0);

  cpuid_avx     = (feature_string[11] >> 4) & 1;
  cpuid_osxsave = (feature_string[11] >> 3) & 1;

  modelstr = "$guess_cpu";

  /**************************************************/
  /*** WARNING: keep this list in sync with fat.c ***/
  /**************************************************/
  if (strcmp (vendor_string, "GenuineIntel") == 0)
    {
      switch (family)
	{
	case 5:
          if (model == 4 || model == 8)               modelstr = "pentiummmx";
	  else                                        modelstr = "pentium";
	  break;
	case 6:
          if (model <= 1)                                   modelstr = "pentiumpro";
          else if (model <= 6)                              modelstr = "pentium2";
          else if (model <= 8)                              modelstr = "pentium3";
          else if (model <= 9)                              modelstr = "pentiumm";
          else if (model <= 0x0c)                           modelstr = "pentium3";
          else if (model <= 0x0e)                           modelstr = "pentiumm";
          else if (model <= 0x19) cpu_64bit = 1,            modelstr = "core2";
          else if (model == 0x1a) cpu_64bit = 1,            modelstr = "nehalem";    /* NHM Gainestown */
          else if (model == 0x1c) cpu_64bit = 1,            modelstr = "atom";       /* Silverthorne */
          else if (model == 0x1d) cpu_64bit = 1,            modelstr = "core2";      /* PNR Dunnington */
          else if (model == 0x1e) cpu_64bit = 1,            modelstr = "nehalem";    /* NHM Lynnfield/Jasper */
          else if (model == 0x25) cpu_64bit = 1,            modelstr = "westmere";   /* WSM Clarkdale/Arrandale */
          else if (model == 0x26) cpu_64bit = 1,            modelstr = "atom";       /* Lincroft */
          else if (model == 0x27) cpu_64bit = 1,            modelstr = "atom";       /* Saltwell */
          else if (model == 0x2a) cpu_64bit = 1, cpu_avx=1, modelstr = "sandybridge";/* SB */
          else if (model == 0x2c) cpu_64bit = 1,            modelstr = "westmere";   /* WSM Gulftown */
          else if (model == 0x2d) cpu_64bit = 1, cpu_avx=1, modelstr = "sandybridge";/* SBC-EP */
          else if (model == 0x2e) cpu_64bit = 1,            modelstr = "nehalem";    /* NHM Beckton */
          else if (model == 0x2f) cpu_64bit = 1,            modelstr = "westmere";   /* WSM Eagleton */
          else if (model == 0x36) cpu_64bit = 1,            modelstr = "atom";       /* Cedarview/Saltwell */
          else if (model == 0x37) cpu_64bit = 1,            modelstr = "silvermont"; /* Silvermont */
          else if (model == 0x3a) cpu_64bit = 1, cpu_avx=1, modelstr = "ivybridge";  /* IBR */
          else if (model == 0x3c) cpu_64bit = 1, cpu_avx=1, modelstr = "haswell";    /* Haswell client */
          else if (model == 0x3d) cpu_64bit = 1, cpu_avx=1, modelstr = "broadwell";  /* Broadwell */
          else if (model == 0x3e) cpu_64bit = 1, cpu_avx=1, modelstr = "ivybridge";  /* Ivytown */
          else if (model == 0x3f) cpu_64bit = 1, cpu_avx=1, modelstr = "haswell";    /* Haswell server */
          else if (model == 0x45) cpu_64bit = 1, cpu_avx=1, modelstr = "haswell";    /* Haswell ULT */
          else if (model == 0x46) cpu_64bit = 1, cpu_avx=1, modelstr = "haswell";    /* Crystal Well */
          else if (model == 0x47) cpu_64bit = 1, cpu_avx=1, modelstr = "broadwell";  /* Broadwell */
          else if (model == 0x4a) cpu_64bit = 1,            modelstr = "silvermont"; /* Silvermont */
          else if (model == 0x4c) cpu_64bit = 1,            modelstr = "silvermont"; /* Airmont */
          else if (model == 0x4d) cpu_64bit = 1,            modelstr = "silvermont"; /* Silvermont/Avoton */
          else if (model == 0x4e) cpu_64bit = 1, cpu_avx=1, modelstr = "skylake";    /* Skylake client */
          else if (model == 0x4f) cpu_64bit = 1, cpu_avx=1, modelstr = "broadwell";  /* Broadwell server */
          else if (model == 0x55) cpu_64bit = 1, cpu_avx=1, modelstr = "skylake";    /* Skylake server */
          else if (model == 0x56) cpu_64bit = 1, cpu_avx=1, modelstr = "broadwell";  /* Broadwell microserver */
          else if (model == 0x57) cpu_64bit = 1,            modelstr = "knightslanding"; /* aka Xeon Phi */
          else if (model == 0x5a) cpu_64bit = 1,            modelstr = "silvermont"; /* Silvermont */
          else if (model == 0x5c) cpu_64bit = 1,            modelstr = "goldmont";   /* Goldmont */
          else if (model == 0x5e) cpu_64bit = 1, cpu_avx=1, modelstr = "skylake";    /* Skylake */
          else if (model == 0x5f) cpu_64bit = 1,            modelstr = "goldmont";   /* Goldmont */
          else if (model == 0x6a) cpu_64bit = 1, cpu_avx=1, modelstr = "icelake";    /* Ice Lake-DE */
          else if (model == 0x6c) cpu_64bit = 1, cpu_avx=1, modelstr = "icelake";    /* Ice Lake-SP */
          else if (model == 0x7a) cpu_64bit = 1,            modelstr = "goldmont";   /* Goldmont Plus */
          else if (model == 0x7d) cpu_64bit = 1, cpu_avx=1, modelstr = "icelake";    /* Ice Lake Y */
          else if (model == 0x7e) cpu_64bit = 1, cpu_avx=1, modelstr = "icelake";    /* Ice Lake U */
          else if (model == 0x8a) cpu_64bit = 1,            modelstr = "tremont";    /* Tremont */
          else if (model == 0x8c) cpu_64bit = 1, cpu_avx=1, modelstr = "tigerlake";  /* Tiger Lake U */
          else if (model == 0x8d) cpu_64bit = 1, cpu_avx=1, modelstr = "tigerlake";  /* Tiger Lake H */
          else if (model == 0x8e) cpu_64bit = 1, cpu_avx=1, modelstr = "kabylake";   /* Kaby Lake Y/U */
          else if (model == 0x8f) cpu_64bit = 1, cpu_avx=1, modelstr = "alderlake";  /* Sapphire Rapids */
          else if (model == 0x96) cpu_64bit = 1,            modelstr = "tremont";    /* Tremont */
          else if (model == 0x97) cpu_64bit = 1, cpu_avx=1, modelstr = "alderlake";  /* Alder Lake S */
          else if (model == 0x9a) cpu_64bit = 1, cpu_avx=1, modelstr = "alderlake";  /* Alder Lake P */
          else if (model == 0x9c) cpu_64bit = 1,            modelstr = "tremont";    /* Tremont */
          else if (model == 0x9e) cpu_64bit = 1, cpu_avx=1, modelstr = "kabylake";   /* Kaby Lake desktop */
          else if (model == 0xa7) cpu_64bit = 1, cpu_avx=1, modelstr = "rocketlake"; /* Rocket Lake S */
          else                    cpu_64bit = 1,            modelstr = "nehalem";    /* default */

	  if (strcmp (modelstr, "haswell") == 0 ||
	      strcmp (modelstr, "broadwell") == 0 ||
	      strcmp (modelstr, "skylake") == 0)
	    {
	      /* Some haswell, broadwell, skylake lack BMI2.  Let them appear
		 as sandybridge for now.  */
	      CPUID (feature_string, 7);
	      if ((feature_string[0 + 8 / 8] & (1 << (8 % 8))) == 0
		  || gmp_workaround_skylake_cpuid_bug ())
		modelstr = "sandybridge";
	    }

	  break;
	case 15:
	  cpu_64bit = 1, modelstr = "pentium4";
	  break;
	}
    }
  else if (strcmp (vendor_string, "AuthenticAMD") == 0)
    {
      switch (family)
	{
	case 5:
	  if (model <= 3)	modelstr = "k5";
	  else if (model <= 7)	modelstr = "k6";
	  else if (model == 8)	modelstr = "k62";
	  else if (model == 9)	modelstr = "k63";
	  else if (model == 10) modelstr = "geode";
	  else if (model == 13) modelstr = "k63";
	  break;
	case 6:
	  modelstr = "athlon";
	  break;
	case 15:		/* K8, K9 */
	  cpu_64bit = 1, modelstr = "k8";
	  break;
	case 16:		/* K10 */
	  cpu_64bit = 1, modelstr = "k10";
	  break;
	case 17:		/* Hybrid k8/k10, claim k8 */
	  cpu_64bit = 1, modelstr = "k8";
	  break;
	case 18:		/* Llano, uses K10 core */
	  cpu_64bit = 1, modelstr = "k10";
	  break;
	case 19:		/* AMD Internal, assume future K10 */
	  cpu_64bit = 1, modelstr = "k10";
	  break;
	case 20:		/* Bobcat */
	  cpu_64bit = 1, modelstr = "bobcat";
	  break;
	case 21:		/* Bulldozer */
	  cpu_64bit = 1, cpu_avx = 1;
	  if (model <= 1)
	    modelstr = "bulldozer";
	  else if (model < 0x20)	/* really 2, [0x10-0x20) */
	    modelstr = "piledriver";
	  else if (model < 0x40)	/* really [0x30-0x40) */
	    modelstr = "steamroller";
	  else				/* really [0x60-0x70) */
	    modelstr = "excavator";
	  break;
	case 22:		/* Jaguar, an improved bobcat */
	  cpu_64bit = 1, cpu_avx = 1, modelstr = "jaguar";
	  break;
	case 23:		/* Zen */
	  cpu_64bit = 1, cpu_avx = 1;
	  switch (model)
	    {
	    case 1:
	    case 8:
	    case 17:
	    case 24:
	      modelstr = "zen";
	      break;
	    default:
	      modelstr = "zen2";
	      break;
	    }
	  break;
	case 25:		/* Zen 3 */
	  cpu_64bit = 1, cpu_avx = 1;
	  modelstr = "zen3";
	  break;
	}
    }
  else if (strcmp (vendor_string, "HygonGenuine") == 0)
    {
      cpu_64bit = 1, cpu_avx = 1;
      modelstr = "zen";
    }
  else if (strcmp (vendor_string, "CyrixInstead") == 0)
    {
      /* Should recognize Cyrix' processors too.  */
    }
  else if (strcmp (vendor_string, "CentaurHauls") == 0)
    {
      switch (family)
	{
	case 6:
	  if (model < 9)	modelstr = "viac3";
	  else if (model < 15)	modelstr = "viac32";
	  else			cpu_64bit = 1, modelstr = "nano";
	  break;
	}
    }

  CPUID (feature_string, 0x80000001);
  cpuid_64bit = (feature_string[7] >> 5) & 1;

  suffix = "";

  if (cpuid_64bit && ! cpu_64bit)
    /* If our cpuid-based CPU identification thinks this is a 32-bit CPU but
       cpuid claims AMD64 capabilities, then revert to the generic "x86_64".
       This is of course wrong, but it can happen in some virtualisers and
       emulators, and this workaround allows for successful 64-bit builds.  */
    modelstr = "x86_64";
  else if (cpu_avx && ! (cpuid_avx && cpuid_osxsave))
    /* For CPUs nominally capable of executing AVX, append "noavx" when not
       both the AVX and OSXSAVE cpuid bits are set.  We tolerate weirdness
       here, as some virtualisers set a broken cpuid state, while other
       virtualisers allow guests to set a broken state.  */
    suffix = "noavx";

  printf ("%s%s", modelstr, suffix);
  return 0;
}
EOF

# The rcx/ecx zeroing here and in the variant below is needed for the BMI2
# check.

  cat <<EOF >${dummy}0.s
	.globl cpuid
	.globl _cpuid
cpuid:
_cpuid:
	push	%rbx
	mov	%rdx, %r8
	mov	%ecx, %eax
	xor	%ecx, %ecx
	.byte	0x0f
	.byte	0xa2
	mov	%ebx, (%r8)
	mov	%edx, 4(%r8)
	mov	%ecx, 8(%r8)
	pop	%rbx
	ret
EOF

  if ($CC_FOR_BUILD ${dummy}0.s $dummy.c -o $dummy) >/dev/null 2>&1; then
    # On 80386 and early 80486 cpuid is not available and will result in a
    # SIGILL message, hence 2>/dev/null.
    #
    # On i386-unknown-freebsd4.9, "/bin/sh -c ./dummy" seems to send an
    # "Illegal instruction (core dumped)" message to stdout, so we test $?
    # to check if the program run was successful.
    #
    x=`$SHELL -c $dummy 2>/dev/null`
    if test $? = 0 && test -n "$x"; then
      exact_cpu=$x
    fi
  fi

  cat <<EOF >${dummy}0.s
	.globl cpuid
	.globl _cpuid
cpuid:
_cpuid:
	pushl %esi
	pushl %ebx
	movl 24(%esp),%eax
	xor	%ecx, %ecx
	.byte 0x0f
	.byte 0xa2
	movl 20(%esp),%esi
	movl %ebx,(%esi)
	movl %edx,4(%esi)
	movl %ecx,8(%esi)
	popl %ebx
	popl %esi
	ret
EOF

  if test -z "$exact_cpu"; then
  if ($CC_FOR_BUILD ${dummy}0.s $dummy.c -o $dummy) >/dev/null 2>&1; then
    # On 80386 and early 80486 cpuid is not available and will result in a
    # SIGILL message, hence 2>/dev/null.
    #
    # On i386-unknown-freebsd4.9, "/bin/sh -c ./dummy" seems to send an
    # "Illegal instruction (core dumped)" message to stdout, so we test $?
    # to check if the program run was successful.
    #
    x=`$SHELL -c $dummy 2>/dev/null`
    if test $? = 0 && test -n "$x"; then
      exact_cpu=$x
    fi
  fi
  fi

  # We need to remove some .o files here since lame C compilers
  # generate these even when not asked.
  ;;

s390*-*-*)
  if test -f /proc/cpuinfo; then
    model=`grep "^processor 0: version =" /proc/cpuinfo | sed -e 's/.*machine = //'`
    case $model in
      2064 | 2066) zcpu="z900" ;;
      2084 | 2086) zcpu="z990" ;;
      2094 | 2096) zcpu="z9"   ;;
      2097 | 2098) zcpu="z10"  ;;
      2817 | 2818 | *) zcpu="z196" ;;
    esac
    if grep "^features.* vxe2" /proc/cpuinfo >/dev/null; then
      zcpu="z15"
    elif grep "^features.* vxe" /proc/cpuinfo >/dev/null; then
      zcpu="z14"
    elif grep "^features.* vx" /proc/cpuinfo >/dev/null; then
      zcpu="z13"
    fi
    case "$guess_full" in
      s390x-*-*) exact_cpu=${zcpu}    ;;
      s390-*-*)  exact_cpu=${zcpu}esa ;;
    esac
  fi
  ;;

esac



# -------------------------------------------------------------------------
# Use an exact cpu, if possible

if test -n "$exact_cpu"; then
  echo "$exact_cpu$guess_rest"
else
  echo "$guess_full"
fi
exit 0



# Local variables:
# fill-column: 76
# End: