Fix paths to gpsd.hotplug in udev rules

The gpsd build system allows us to specify where to install udev rules
with "scons udevdir=...", but the rules file itself will always contain
(hardcoded) paths to /lib/udev. Which makes it broken.

This patch makes it so that the references to gpsd.hotplug stays in sync
with where the rules file is installed, by adding a @udevdir@ "magic
marker" in the rules file (now renamed to gpsd.rules.in) and then
substituting that for the real udevdir install path at build time.

Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>

1 files changed, 0 insertions, 53 deletions

diff --git a/gpsd.rules b/gpsd.rules
deleted file mode 100644
index f1dbe631..00000000
--- a/gpsd.rules
+++ /dev/null
@@ -1,53 +0,0 @@
-# udev rules for gpsd
-#
-# This file is Copyright (c) 2010 by the GPSD project
-# BSD terms apply: see the file COPYING in the distribution root for details.
-#
-# GPSes don't have their own USB device class.  They're serial-over-USB
-# devices, so what you see is actually the ID of the serial-over-USB chip.
-# Fortunately, just two of these account for over 80% of consumer-grade
-# GPS sensors.  The gpsd.hotplug wrapper script will tell a running gpsd
-# that it should look at the device that just went active, because it
-# might be a GPS.
-#
-# The following setup works on Debian and Ubuntu - something similar
-# will apply on other distributions:
-# 
-#   /lib/udev/rules.d/25-gpsd.rules
-#   /lib/udev/gpsd.hotplug
-# 
-# Setting the link in /lib/udev/rules.d activates the rule and determines
-# when to run it on boot (similar to init.d processing).
-
-SUBSYSTEM!="tty", GOTO="gpsd_rules_end"
-
-# Prolific Technology, Inc. PL2303 Serial Port [linux module: pl2303]
-ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# ATEN International Co., Ltd UC-232A Serial Port [linux module: pl2303]
-ATTRS{idVendor}=="0557", ATTRS{idProduct}=="2008", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# PS-360 OEM (GPS sold with MS Street and Trips 2005) [linux module: pl2303]
-ATTRS{idVendor}=="067b", ATTRS{idProduct}=="aaa0", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# FTDI 8U232AM / FT232 [linux module: ftdi_sio]
-ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# Cypress M8/CY7C64013 (Delorme uses these) [linux module: cypress_m8]
-ATTRS{idVendor}=="1163", ATTRS{idProduct}=="0100", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# Cypress M8/CY7C64013 (DeLorme LT-40)
-ATTRS{idVendor}=="1163", ATTRS{idProduct}=="0200", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug" 
-# Garmin International GPSmap, various models (tested with Garmin GPS 18 USB)  [linux module: garmin_gps]
-ATTRS{idVendor}=="091e", ATTRS{idProduct}=="0003", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# Cygnal Integrated Products, Inc. CP210x Composite Device (Used by Holux m241 and Wintec grays2 wbt-201) [linux module: cp210x]
-ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", SYMLINK+="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# Cygnal Integrated Products, Inc. [linux module: cp210x]
-ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea71", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# u-blox AG, u-blox 5 (tested with Navilock NL-402U) [linux module: cdc_acm]
-ATTRS{idVendor}=="1546", ATTRS{idProduct}=="01a5", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# u-blox AG, u-blox 6 (tested with GNSS Evaluation Kit TCXO) [linux module: cdc_acm]
-ATTRS{idVendor}=="1546", ATTRS{idProduct}=="01a6", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# MediaTek (tested with HOLUX M-1200E) [linux module: cdc_acm]
-ATTRS{idVendor}=="0e8d", ATTRS{idProduct}=="3329", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-# Telit wireless solutions (tested with HE910G) [linux module: cdc_acm]
-ATTRS{interface}=="Telit Wireless Module Port", ATTRS{bInterfaceNumber}=="06", SYMLINK="gps%n", RUN+="/lib/udev/gpsd.hotplug"
-
-ACTION=="remove", RUN+="/lib/udev/gpsd.hotplug"
-
-LABEL="gpsd_rules_end"