diff options
Diffstat (limited to 'src/libs/gnulib/Makefile.in')
| -rw-r--r-- | src/libs/gnulib/Makefile.in | 275 |
1 files changed, 170 insertions, 105 deletions
diff --git a/src/libs/gnulib/Makefile.in b/src/libs/gnulib/Makefile.in index 86f259b1..a062c880 100644 --- a/src/libs/gnulib/Makefile.in +++ b/src/libs/gnulib/Makefile.in @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. +# Makefile.in generated by automake 1.12.5 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -15,6 +14,23 @@ @SET_MAKE@ VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -35,23 +51,29 @@ host_triplet = @host@ subdir = . DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(top_srcdir)/configure build-aux/compile \ - build-aux/config.guess build-aux/config.sub build-aux/depcomp \ - build-aux/install-sh build-aux/missing + $(top_srcdir)/build-aux/compile \ + $(top_srcdir)/build-aux/config.guess \ + $(top_srcdir)/build-aux/config.sub \ + $(top_srcdir)/build-aux/install-sh \ + $(top_srcdir)/build-aux/missing $(top_srcdir)/configure \ + build-aux/compile build-aux/config.guess build-aux/config.sub \ + build-aux/depcomp build-aux/install-sh build-aux/missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \ $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/configmake.m4 \ - $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-o.m4 \ + $(top_srcdir)/m4/extensions.m4 \ + $(top_srcdir)/m4/extern-inline.m4 $(top_srcdir)/m4/fcntl-o.m4 \ $(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/gnulib-common.m4 \ $(top_srcdir)/m4/include_next.m4 \ + $(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \ $(top_srcdir)/m4/libunistring-base.m4 \ $(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/longlong.m4 \ $(top_srcdir)/m4/multiarch.m4 $(top_srcdir)/m4/onceonly.m4 \ - $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdint.m4 \ - $(top_srcdir)/m4/warn-on-use.m4 $(top_srcdir)/m4/wchar_h.m4 \ - $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype_h.m4 \ - $(top_srcdir)/m4/wcwidth.m4 $(top_srcdir)/m4/wint_t.m4 \ - $(top_srcdir)/configure.ac + $(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/stddef_h.m4 \ + $(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/warn-on-use.m4 \ + $(top_srcdir)/m4/wchar_h.m4 $(top_srcdir)/m4/wchar_t.m4 \ + $(top_srcdir)/m4/wctype_h.m4 $(top_srcdir)/m4/wcwidth.m4 \ + $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ @@ -69,21 +91,30 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir dist dist-all distcheck + cscope distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags +CSCOPE = cscope DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ - { test ! -d "$(distdir)" \ - || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr "$(distdir)"; }; } + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ @@ -111,7 +142,10 @@ am__relativize = \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best +DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print pkglibexecdir = @pkglibexecdir@ ACLOCAL = @ACLOCAL@ @@ -143,6 +177,8 @@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GLIBC21 = @GLIBC21@ GNULIB_BTOWC = @GNULIB_BTOWC@ +GNULIB_IMAXABS = @GNULIB_IMAXABS@ +GNULIB_IMAXDIV = @GNULIB_IMAXDIV@ GNULIB_ISWBLANK = @GNULIB_ISWBLANK@ GNULIB_ISWCTYPE = @GNULIB_ISWCTYPE@ GNULIB_MBRLEN = @GNULIB_MBRLEN@ @@ -150,6 +186,8 @@ GNULIB_MBRTOWC = @GNULIB_MBRTOWC@ GNULIB_MBSINIT = @GNULIB_MBSINIT@ GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@ GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@ +GNULIB_STRTOIMAX = @GNULIB_STRTOIMAX@ +GNULIB_STRTOUMAX = @GNULIB_STRTOUMAX@ GNULIB_TOWCTRANS = @GNULIB_TOWCTRANS@ GNULIB_WCPCPY = @GNULIB_WCPCPY@ GNULIB_WCPNCPY = @GNULIB_WCPNCPY@ @@ -188,6 +226,10 @@ GNULIB_WMEMMOVE = @GNULIB_WMEMMOVE@ GNULIB_WMEMSET = @GNULIB_WMEMSET@ GREP = @GREP@ HAVE_BTOWC = @HAVE_BTOWC@ +HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@ +HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@ +HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@ +HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@ HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@ HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@ HAVE_FEATURES_H = @HAVE_FEATURES_H@ @@ -245,6 +287,7 @@ HAVE_WMEMCMP = @HAVE_WMEMCMP@ HAVE_WMEMCPY = @HAVE_WMEMCPY@ HAVE_WMEMMOVE = @HAVE_WMEMMOVE@ HAVE_WMEMSET = @HAVE_WMEMSET@ +HAVE__BOOL = @HAVE__BOOL@ INCLUDE_NEXT = @INCLUDE_NEXT@ INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@ INSTALL = @INSTALL@ @@ -252,6 +295,8 @@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INT32_MAX_LT_INTMAX_MAX = @INT32_MAX_LT_INTMAX_MAX@ +INT64_MAX_EQ_LONG_MAX = @INT64_MAX_EQ_LONG_MAX@ LDFLAGS = @LDFLAGS@ LIBGNU_LIBDEPS = @LIBGNU_LIBDEPS@ LIBGNU_LTLIBDEPS = @LIBGNU_LTLIBDEPS@ @@ -263,10 +308,12 @@ LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ +NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H = @NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H@ NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = @NEXT_AS_FIRST_DIRECTIVE_STDDEF_H@ NEXT_AS_FIRST_DIRECTIVE_STDINT_H = @NEXT_AS_FIRST_DIRECTIVE_STDINT_H@ NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = @NEXT_AS_FIRST_DIRECTIVE_WCHAR_H@ NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = @NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H@ +NEXT_INTTYPES_H = @NEXT_INTTYPES_H@ NEXT_STDDEF_H = @NEXT_STDDEF_H@ NEXT_STDINT_H = @NEXT_STDINT_H@ NEXT_WCHAR_H = @NEXT_WCHAR_H@ @@ -282,6 +329,8 @@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PRAGMA_COLUMNS = @PRAGMA_COLUMNS@ PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@ +PRIPTR_PREFIX = @PRIPTR_PREFIX@ +PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@ PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@ RANLIB = @RANLIB@ REPLACE_BTOWC = @REPLACE_BTOWC@ @@ -294,6 +343,7 @@ REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@ REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@ REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@ REPLACE_NULL = @REPLACE_NULL@ +REPLACE_STRTOIMAX = @REPLACE_STRTOIMAX@ REPLACE_TOWLOWER = @REPLACE_TOWLOWER@ REPLACE_WCRTOMB = @REPLACE_WCRTOMB@ REPLACE_WCSNRTOMBS = @REPLACE_WCSNRTOMBS@ @@ -305,9 +355,12 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@ SIZE_T_SUFFIX = @SIZE_T_SUFFIX@ +STDBOOL_H = @STDBOOL_H@ STDDEF_H = @STDDEF_H@ STDINT_H = @STDINT_H@ STRIP = @STRIP@ +UINT32_MAX_LT_UINTMAX_MAX = @UINT32_MAX_LT_UINTMAX_MAX@ +UINT64_MAX_EQ_ULONG_MAX = @UINT64_MAX_EQ_ULONG_MAX@ VERSION = @VERSION@ WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@ WINT_T_SUFFIX = @WINT_T_SUFFIX@ @@ -371,7 +424,7 @@ all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: -am--refresh: +am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ @@ -407,10 +460,8 @@ $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__aclocal_m4_deps): config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi + @if test ! -f $@; then rm -f stamp-h1; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 @@ -424,12 +475,12 @@ distclean-hdr: -rm -f config.h stamp-h1 # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ @@ -439,7 +490,11 @@ $(RECURSIVE_TARGETS): done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -453,37 +508,6 @@ $(RECURSIVE_TARGETS): if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ @@ -492,6 +516,10 @@ ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done +cscopelist-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ + done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ @@ -555,8 +583,32 @@ GTAGS: && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) + +clean-cscope: + -rm -f cscope.files + +cscope.files: clean-cscope cscopelist-recursive cscopelist + +cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) @@ -592,13 +644,10 @@ distdir: $(DISTFILES) done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ @@ -627,36 +676,36 @@ distdir: $(DISTFILES) || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) + $(am__post_remove_distdir) dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) dist-xz: distdir - tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz - $(am__remove_distdir) + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) + $(am__post_remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) + $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) + $(am__post_remove_distdir) -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another @@ -667,8 +716,8 @@ distcheck: dist GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ @@ -678,9 +727,9 @@ distcheck: dist *.zip*) \ unzip $(distdir).zip ;;\ esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ @@ -688,6 +737,7 @@ distcheck: dist && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ @@ -711,13 +761,21 @@ distcheck: dist && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 - $(am__remove_distdir) + $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: - @$(am__cd) '$(distuninstallcheck_dir)' \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ @@ -748,10 +806,15 @@ install-am: all-am installcheck: installcheck-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: @@ -833,20 +896,22 @@ ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ - ctags-recursive install-am install-strip tags-recursive + cscopelist-recursive ctags-recursive install-am install-strip \ + tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ - dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \ - distclean distclean-generic distclean-hdr distclean-tags \ - distcleancheck distdir distuninstallcheck dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ + all all-am am--refresh check check-am clean clean-cscope \ + clean-generic cscope cscopelist cscopelist-recursive ctags \ + ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-lzip \ + dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \ + distclean-generic distclean-hdr distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am |