path: root/doc/ref/api-io.texi

@c -*-texinfo-*-
@c This is part of the GNU Guile Reference Manual.
@c Copyright (C)  1996, 1997, 2000, 2001, 2002, 2003, 2004, 2007, 2009,
@c   2010, 2011, 2013  Free Software Foundation, Inc.
@c See the file guile.texi for copying conditions.

@node Input and Output
@section Input and Output

@menu
* Ports::                       The idea of the port abstraction.
* Reading::                     Procedures for reading from a port.
* Writing::                     Procedures for writing to a port.
* Closing::                     Procedures to close a port.
* Buffering::                   Controlling when data is written to ports.
* Random Access::               Moving around a random access port.
* Line/Delimited::              Read and write lines or delimited text.
* Block Reading and Writing::   Reading and writing blocks of text.
* Default Ports::               Defaults for input, output and errors.
* Port Types::                  Types of port and how to make them.
* R6RS I/O Ports::              The R6RS port API.
* I/O Extensions::              Implementing new port types in C.
* BOM Handling::                Handling of Unicode byte order marks.
@end menu


@node Ports
@subsection Ports
@cindex Port

Sequential input/output in Scheme is represented by operations on a
@dfn{port}.  This chapter explains the operations that Guile provides
for working with ports.

Ports are created by opening, for instance @code{open-file} for a file
(@pxref{File Ports}).  Other kinds of ports include @dfn{soft ports} and
@dfn{string ports} (@pxref{Soft Ports}, and @ref{String Ports}).
Characters or bytes can be read from an input port and written to an
output port, or both on an input/output port.  A port can be closed
(@pxref{Closing}) when no longer required, after which any attempt to
read or write is an error.

Ports are garbage collected in the usual way (@pxref{Memory
Management}), and will be closed at that time if not already closed.  In
this case any errors occurring in the close will not be reported.
Usually a program will want to explicitly close so as to be sure all its
operations have been successful, including any buffered writes
(@pxref{Buffering}).  Of course if a program has abandoned something due
to an error or other condition then closing problems are probably not of
interest.

It is strongly recommended that file ports be closed explicitly when
no longer required.  Most systems have limits on how many files can be
open, both on a per-process and a system-wide basis.  A program that
uses many files should take care not to hit those limits.  The same
applies to similar system resources such as pipes and sockets.

Note that automatic garbage collection is triggered only by memory
consumption, not by file or other resource usage, so a program cannot
rely on that to keep it away from system limits.  An explicit call to
@code{gc} can of course be relied on to pick up unreferenced ports.
If program flow makes it hard to be certain when to close then this
may be an acceptable way to control resource usage.

All file access uses the ``LFS'' large file support functions when
available, so files bigger than 2 Gbytes (@math{2^31} bytes) can be
read and written on a 32-bit system.

Each port has an associated character encoding that controls how bytes
read from the port are converted to characters and controls how
characters written to the port are converted to bytes.  When ports are
created, they inherit their character encoding from the current locale,
but, that can be modified after the port is created.

Currently, the ports only work with @emph{non-modal} encodings.  Most
encodings are non-modal, meaning that the conversion of bytes to a
string doesn't depend on its context: the same byte sequence will always
return the same string.  A couple of modal encodings are in common use,
like ISO-2022-JP and ISO-2022-KR, and they are not yet supported.

@cindex port conversion strategy
@cindex conversion strategy, port
@cindex decoding error
@cindex encoding error
Each port also has an associated conversion strategy, which determines
what to do when a Guile character can't be converted to the port's
encoded character representation for output.  There are three possible
strategies: to raise an error, to replace the character with a hex
escape, or to replace the character with a substitute character.  Port
conversion strategies are also used when decoding characters from an
input port.

Finally, all ports have associated input and output buffers, as
appropriate.  Buffering is a common strategy to limit the overhead of
small reads and writes: without buffering, each character fetched from a
file would involve at least one call into the kernel, and maybe more
depending on the character and the encoding.  Instead, Guile will batch
reads and writes into internal buffers.  However, sometimes you want to
make output on a port show up immediately.  @xref{Buffering}, for more
on interfaces to control port buffering.

@rnindex input-port?
@deffn {Scheme Procedure} input-port? x
@deffnx {C Function} scm_input_port_p (x)
Return @code{#t} if @var{x} is an input port, otherwise return
@code{#f}.  Any object satisfying this predicate also satisfies
@code{port?}.
@end deffn

@rnindex output-port?
@deffn {Scheme Procedure} output-port? x
@deffnx {C Function} scm_output_port_p (x)
Return @code{#t} if @var{x} is an output port, otherwise return
@code{#f}.  Any object satisfying this predicate also satisfies
@code{port?}.
@end deffn

@deffn {Scheme Procedure} port? x
@deffnx {C Function} scm_port_p (x)
Return a boolean indicating whether @var{x} is a port.
Equivalent to @code{(or (input-port? @var{x}) (output-port?
@var{x}))}.
@end deffn

@deffn {Scheme Procedure} set-port-encoding! port enc
@deffnx {C Function} scm_set_port_encoding_x (port, enc)
Sets the character encoding that will be used to interpret all port I/O.
@var{enc} is a string containing the name of an encoding.  Valid
encoding names are those
@url{http://www.iana.org/assignments/character-sets, defined by IANA}.
@end deffn

@defvr {Scheme Variable} %default-port-encoding
A fluid containing @code{#f} or the name of the encoding to
be used by default for newly created ports (@pxref{Fluids and Dynamic
States}).  The value @code{#f} is equivalent to @code{"ISO-8859-1"}.

New ports are created with the encoding appropriate for the current
locale if @code{setlocale} has been called or the value specified by
this fluid otherwise.
@end defvr

@deffn {Scheme Procedure} port-encoding port
@deffnx {C Function} scm_port_encoding (port)
Returns, as a string, the character encoding that @var{port} uses to interpret
its input and output.  The value @code{#f} is equivalent to @code{"ISO-8859-1"}.
@end deffn

@deffn {Scheme Procedure} set-port-conversion-strategy! port sym
@deffnx {C Function} scm_set_port_conversion_strategy_x (port, sym)
Sets the behavior of Guile when outputting a character that is not
representable in the port's current encoding, or when Guile encounters a
decoding error when trying to read a character.  @var{sym} can be either
@code{error}, @code{substitute}, or @code{escape}.

If @var{port} is an open port, the conversion error behavior
is set for that port.  If it is @code{#f}, it is set as the
default behavior for any future ports that get created in
this thread.
@end deffn

For an output port, a there are three possible port conversion
strategies.  The @code{error} strategy will throw an error when a
nonconvertible character is encountered.  The @code{substitute} strategy
will replace nonconvertible characters with a question mark (@samp{?}).
Finally the @code{escape} strategy will print nonconvertible characters
as a hex escape, using the escaping that is recognized by Guile's string
syntax.  Note that if the port's encoding is a Unicode encoding, like
@code{UTF-8}, then encoding errors are impossible.

For an input port, the @code{error} strategy will cause Guile to throw
an error if it encounters an invalid encoding, such as might happen if
you tried to read @code{ISO-8859-1} as @code{UTF-8}.  The error is
thrown before advancing the read position.  The @code{substitute}
strategy will replace the bad bytes with a U+FFFD replacement character,
in accordance with Unicode recommendations.  When reading from an input
port, the @code{escape} strategy is treated as if it were @code{error}.

@deffn {Scheme Procedure} port-conversion-strategy port
@deffnx {C Function} scm_port_conversion_strategy (port)
Returns the behavior of the port when outputting a character that is not
representable in the port's current encoding.

If @var{port} is @code{#f}, then the current default behavior will be
returned.  New ports will have this default behavior when they are
created.
@end deffn

@deffn {Scheme Variable} %default-port-conversion-strategy
The fluid that defines the conversion strategy for newly created ports,
and for other conversion routines such as @code{scm_to_stringn},
@code{scm_from_stringn}, @code{string->pointer}, and
@code{pointer->string}.

Its value must be one of the symbols described above, with the same
semantics: @code{error}, @code{substitute}, or @code{escape}.

When Guile starts, its value is @code{substitute}.

Note that @code{(set-port-conversion-strategy! #f @var{sym})} is
equivalent to @code{(fluid-set! %default-port-conversion-strategy
@var{sym})}.
@end deffn


@node Reading
@subsection Reading
@cindex Reading

These procedures pertain to reading characters and strings from
ports. To read general S-expressions from ports, @xref{Scheme Read}.

@rnindex eof-object?
@cindex End of file object
@deffn {Scheme Procedure} eof-object? x
@deffnx {C Function} scm_eof_object_p (x)
Return @code{#t} if @var{x} is an end-of-file object; otherwise
return @code{#f}.
@end deffn

@rnindex char-ready?
@deffn {Scheme Procedure} char-ready? [port]
@deffnx {C Function} scm_char_ready_p (port)
Return @code{#t} if a character is ready on input @var{port}
and return @code{#f} otherwise.  If @code{char-ready?} returns
@code{#t} then the next @code{read-char} operation on
@var{port} is guaranteed not to hang.  If @var{port} is a file
port at end of file then @code{char-ready?} returns @code{#t}.

@code{char-ready?} exists to make it possible for a
program to accept characters from interactive ports without
getting stuck waiting for input.  Any input editors associated
with such ports must make sure that characters whose existence
has been asserted by @code{char-ready?} cannot be rubbed out.
If @code{char-ready?} were to return @code{#f} at end of file,
a port at end of file would be indistinguishable from an
interactive port that has no ready characters.
@end deffn

@rnindex read-char
@deffn {Scheme Procedure} read-char [port]
@deffnx {C Function} scm_read_char (port)
Return the next character available from @var{port}, updating @var{port}
to point to the following character.  If no more characters are
available, the end-of-file object is returned.  A decoding error, if
any, is handled in accordance with the port's conversion strategy.
@end deffn

@deftypefn {C Function} size_t scm_c_read (SCM port, void *buffer, size_t size)
Read up to @var{size} bytes from @var{port} and store them in
@var{buffer}.  The return value is the number of bytes actually read,
which can be less than @var{size} if end-of-file has been reached.

Note that this function does not update @code{port-line} and
@code{port-column} below.
@end deftypefn

@rnindex peek-char
@deffn {Scheme Procedure} peek-char [port]
@deffnx {C Function} scm_peek_char (port)
Return the next character available from @var{port},
@emph{without} updating @var{port} to point to the following
character.  If no more characters are available, the
end-of-file object is returned.

The value returned by
a call to @code{peek-char} is the same as the value that would
have been returned by a call to @code{read-char} on the same
port.  The only difference is that the very next call to
@code{read-char} or @code{peek-char} on that @var{port} will
return the value returned by the preceding call to
@code{peek-char}.  In particular, a call to @code{peek-char} on
an interactive port will hang waiting for input whenever a call
to @code{read-char} would have hung.

As for @code{read-char}, decoding errors are handled in accordance with
the port's conversion strategy.
@end deffn

@deffn {Scheme Procedure} unread-char cobj [port]
@deffnx {C Function} scm_unread_char (cobj, port)
Place character @var{cobj} in @var{port} so that it will be read by the
next read operation.  If called multiple times, the unread characters
will be read again in last-in first-out order.  If @var{port} is
not supplied, the current input port is used.
@end deffn

@deffn {Scheme Procedure} unread-string str port
@deffnx {C Function} scm_unread_string (str, port)
Place the string @var{str} in @var{port} so that its characters will
be read from left-to-right as the next characters from @var{port}
during subsequent read operations.  If called multiple times, the
unread characters will be read again in last-in first-out order.  If
@var{port} is not supplied, the @code{current-input-port} is used.
@end deffn

@deffn {Scheme Procedure} drain-input port
@deffnx {C Function} scm_drain_input (port)
This procedure clears a port's input buffers, similar
to the way that force-output clears the output buffer.  The
contents of the buffers are returned as a single string, e.g.,

@lisp
(define p (open-input-file ...))
(drain-input p) => empty string, nothing buffered yet.
(unread-char (read-char p) p)
(drain-input p) => initial chars from p, up to the buffer size.
@end lisp

Draining the buffers may be useful for cleanly finishing
buffered I/O so that the file descriptor can be used directly
for further input.
@end deffn

@deffn {Scheme Procedure} port-column port
@deffnx {Scheme Procedure} port-line port
@deffnx {C Function} scm_port_column (port)
@deffnx {C Function} scm_port_line (port)
Return the current column number or line number of @var{port}.
If the number is
unknown, the result is #f.  Otherwise, the result is a 0-origin integer
- i.e.@: the first character of the first line is line 0, column 0.
(However, when you display a file position, for example in an error
message, we recommend you add 1 to get 1-origin integers.  This is
because lines and column numbers traditionally start with 1, and that is
what non-programmers will find most natural.)
@end deffn

@deffn {Scheme Procedure} set-port-column! port column
@deffnx {Scheme Procedure} set-port-line! port line
@deffnx {C Function} scm_set_port_column_x (port, column)
@deffnx {C Function} scm_set_port_line_x (port, line)
Set the current column or line number of @var{port}.
@end deffn

@node Writing
@subsection Writing
@cindex Writing

These procedures are for writing characters and strings to
ports. For more information on writing arbitrary Scheme objects to
ports, @xref{Scheme Write}.

@deffn {Scheme Procedure} get-print-state port
@deffnx {C Function} scm_get_print_state (port)
Return the print state of the port @var{port}.  If @var{port}
has no associated print state, @code{#f} is returned.
@end deffn

@rnindex newline
@deffn {Scheme Procedure} newline [port]
@deffnx {C Function} scm_newline (port)
Send a newline to @var{port}.
If @var{port} is omitted, send to the current output port.
@end deffn

@deffn {Scheme Procedure} port-with-print-state port [pstate]
@deffnx {C Function} scm_port_with_print_state (port, pstate)
Create a new port which behaves like @var{port}, but with an
included print state @var{pstate}.  @var{pstate} is optional.
If @var{pstate} isn't supplied and @var{port} already has
a print state, the old print state is reused.
@end deffn

@deffn {Scheme Procedure} simple-format destination message . args
@deffnx {C Function} scm_simple_format (destination, message, args)
Write @var{message} to @var{destination}, defaulting to the current
output port.  @var{message} can contain @code{~A} and @code{~S} escapes.
When printed, the escapes are replaced with corresponding members of
@var{args}: @code{~A} formats using @code{display} and @code{~S} formats
using @code{write}.  If @var{destination} is @code{#t}, then use the
current output port, if @var{destination} is @code{#f}, then return a
string containing the formatted text.  Does not add a trailing newline.
@end deffn

@rnindex write-char
@deffn {Scheme Procedure} write-char chr [port]
@deffnx {C Function} scm_write_char (chr, port)
Send character @var{chr} to @var{port}.
@end deffn

@deftypefn {C Function} void scm_c_write (SCM port, const void *buffer, size_t size)
Write @var{size} bytes at @var{buffer} to @var{port}.

Note that this function does not update @code{port-line} and
@code{port-column} (@pxref{Reading}).
@end deftypefn

@deftypefn {C Function} void scm_lfwrite (const char *buffer, size_t size, SCM port)
Write @var{size} bytes at @var{buffer} to @var{port}.  The @code{lf}
indicates that unlike @code{scm_c_write}, this function updates the
port's @code{port-line} and @code{port-column}, and also flushes the
port if the data contains a newline (@code{\n}) and the port is
line-buffered.
@end deftypefn

@findex fflush
@deffn {Scheme Procedure} force-output [port]
@deffnx {C Function} scm_force_output (port)
Flush the specified output port, or the current output port if @var{port}
is omitted.  The current output buffer contents are passed to the
underlying port implementation (e.g., in the case of fports, the
data will be written to the file and the output buffer will be cleared.)
It has no effect on an unbuffered port.

The return value is unspecified.
@end deffn

@deffn {Scheme Procedure} flush-all-ports
@deffnx {C Function} scm_flush_all_ports ()
Equivalent to calling @code{force-output} on
all open output ports.  The return value is unspecified.
@end deffn


@node Closing
@subsection Closing
@cindex Closing ports
@cindex Port, close

@deffn {Scheme Procedure} close-port port
@deffnx {C Function} scm_close_port (port)
Close the specified port object.  Return @code{#t} if it successfully
closes a port or @code{#f} if it was already closed.  An exception may
be raised if an error occurs, for example when flushing buffered output.
@xref{Buffering}, for more on buffered output.  See also @ref{Ports and
File Descriptors, close}, for a procedure which can close file
descriptors.
@end deffn

@deffn {Scheme Procedure} close-input-port port
@deffnx {Scheme Procedure} close-output-port port
@deffnx {C Function} scm_close_input_port (port)
@deffnx {C Function} scm_close_output_port (port)
@rnindex close-input-port
@rnindex close-output-port
Close the specified input or output @var{port}.  An exception may be
raised if an error occurs while closing.  If @var{port} is already
closed, nothing is done.  The return value is unspecified.

See also @ref{Ports and File Descriptors, close}, for a procedure
which can close file descriptors.
@end deffn

@deffn {Scheme Procedure} port-closed? port
@deffnx {C Function} scm_port_closed_p (port)
Return @code{#t} if @var{port} is closed or @code{#f} if it is
open.
@end deffn


@node Buffering
@subsection Buffering
@cindex Port, buffering

Every port has associated input and output buffers.  You can think of
ports as being backed by some mutable store, and that store might be far
away.  For example, ports backed by file descriptors have to go all the
way to the kernel to read and write their data.  To avoid this
round-trip cost, Guile usually reads in data from the mutable store in
chunks, and then services small requests like @code{get-char} out of
that intermediate buffer.  Similarly, small writes like
@code{write-char} first go to a buffer, and are sent to the store when
the buffer is full (or when port is flushed).  Buffered ports speed up
your program by reducing the number of round-trips to the mutable store,
and the do so in a way that is mostly transparent to the user.

There are two major ways, however, in which buffering affects program
semantics.  Building correct, performant programs requires understanding
these situations.

The first case is in random-access read/write ports (@pxref{Random
Access}).  These ports, usually backed by a file, logically operate over
the same mutable store when both reading and writing.  So, if you read a
character, causing the buffer to fill, then write a character, the bytes
you filled in your read buffer are now invalid.  Every time you switch
between reading and writing, Guile has to flush any pending buffer.  If
this happens frequently, the cost can be high.  In that case you should
reduce the amount that you buffer, in both directions.  Similarly, Guile
has to flush buffers before seeking.  None of these considerations apply
to sockets, which don't logically read from and write to the same
mutable store, and are not seekable.  Note also that sockets are
unbuffered by default.  @xref{Network Sockets and Communication}.

The second case is the more pernicious one.  If you write data to a
buffered port, it probably hasn't gone out to the mutable store yet.
(This ``probably'' introduces some indeterminism in your program: what
goes to the store, and when, depends on how full the buffer is.  It is
something that the user needs to explicitly be aware of.)  The data is
written to the store later -- when the buffer fills up due to another
write, or when @code{force-output} is called, or when @code{close-port}
is called, or when the program exits, or even when the garbage collector
runs.  The salient point is, @emph{the errors are signalled then too}.
Buffered writes defer error detection (and defer the side effects to the
mutable store), perhaps indefinitely if the port type does not need to
be closed at GC.

One common heuristic that works well for textual ports is to flush
output when a newline (@code{\n}) is written.  This @dfn{line buffering}
mode is on by default for TTY ports.  Most other ports are @dfn{block
buffered}, meaning that once the output buffer reaches the block size,
which depends on the port and its configuration, the output is flushed
as a block, without regard to what is in the block.  Likewise reads are
read in at the block size, though if there are fewer bytes available to
read, the buffer may not be entirely filled.

Note that binary reads or writes that are larger than the buffer size go
directly to the mutable store without passing through the buffers.  If
your access pattern involves many big reads or writes, buffering might
not matter so much to you.

To control the buffering behavior of a port, use @code{setvbuf}.

@deffn {Scheme Procedure} setvbuf port mode [size]
@deffnx {C Function} scm_setvbuf (port, mode, size)
@cindex port buffering
Set the buffering mode for @var{port}.  @var{mode} can be one of the
following symbols:

@table @code
@item none
non-buffered
@item line
line buffered
@item block
block buffered, using a newly allocated buffer of @var{size} bytes.
If @var{size} is omitted, a default size will be used.
@end table
@end deffn

Another way to set the buffering, for file ports, is to open the file
with @code{0} or @code{l} as part of the mode string, for unbuffered or
line-buffered ports, respectively.  @xref{File Ports}, for more.

All of these considerations are very similar to those of streams in the
C library, although Guile's ports are not built on top of C streams.
Still, it is useful to read what other systems do.
@xref{Streams,,,libc,The GNU C Library Reference Manual}, for more
discussion on C streams.


@node Random Access
@subsection Random Access
@cindex Random access, ports
@cindex Port, random access

@deffn {Scheme Procedure} seek fd_port offset whence
@deffnx {C Function} scm_seek (fd_port, offset, whence)
Sets the current position of @var{fd_port} to the integer
@var{offset}.  For a file port, @var{offset} is expressed
as a number of bytes; for other types of ports, such as string
ports, @var{offset} is an abstract representation of the
position within the port's data, not necessarily expressed
as a number of bytes.  @var{offset} is interpreted according to
the value of @var{whence}.

One of the following variables should be supplied for
@var{whence}:
@defvar SEEK_SET
Seek from the beginning of the file.
@end defvar
@defvar SEEK_CUR
Seek from the current position.
@end defvar
@defvar SEEK_END
Seek from the end of the file.
@end defvar
If @var{fd_port} is a file descriptor, the underlying system
call is @code{lseek}.  @var{port} may be a string port.

The value returned is the new position in @var{fd_port}.  This means
that the current position of a port can be obtained using:
@lisp
(seek port 0 SEEK_CUR)
@end lisp
@end deffn

@deffn {Scheme Procedure} ftell fd_port
@deffnx {C Function} scm_ftell (fd_port)
Return an integer representing the current position of
@var{fd_port}, measured from the beginning.  Equivalent to:

@lisp
(seek port 0 SEEK_CUR)
@end lisp
@end deffn

@findex truncate
@findex ftruncate
@deffn {Scheme Procedure} truncate-file file [length]
@deffnx {C Function} scm_truncate_file (file, length)
Truncate @var{file} to @var{length} bytes.  @var{file} can be a
filename string, a port object, or an integer file descriptor.  The
return value is unspecified.

For a port or file descriptor @var{length} can be omitted, in which
case the file is truncated at the current position (per @code{ftell}
above).

On most systems a file can be extended by giving a length greater than
the current size, but this is not mandatory in the POSIX standard.
@end deffn

@node Line/Delimited
@subsection Line Oriented and Delimited Text
@cindex Line input/output
@cindex Port, line input/output

The delimited-I/O module can be accessed with:

@lisp
(use-modules (ice-9 rdelim))
@end lisp

It can be used to read or write lines of text, or read text delimited by
a specified set of characters.  It's similar to the @code{(scsh rdelim)}
module from guile-scsh, but does not use multiple values or character
sets and has an extra procedure @code{write-line}.

@c begin (scm-doc-string "rdelim.scm" "read-line")
@deffn {Scheme Procedure} read-line [port] [handle-delim]
Return a line of text from @var{port} if specified, otherwise from the
value returned by @code{(current-input-port)}.  Under Unix, a line of text
is terminated by the first end-of-line character or by end-of-file.

If @var{handle-delim} is specified, it should be one of the following
symbols:
@table @code
@item trim
Discard the terminating delimiter.  This is the default, but it will
be impossible to tell whether the read terminated with a delimiter or
end-of-file.
@item concat
Append the terminating delimiter (if any) to the returned string.
@item peek
Push the terminating delimiter (if any) back on to the port.
@item split
Return a pair containing the string read from the port and the
terminating delimiter or end-of-file object.
@end table
@end deffn

@c begin (scm-doc-string "rdelim.scm" "read-line!")
@deffn {Scheme Procedure} read-line! buf [port]
Read a line of text into the supplied string @var{buf} and return the
number of characters added to @var{buf}.  If @var{buf} is filled, then
@code{#f} is returned.
Read from @var{port} if
specified, otherwise from the value returned by @code{(current-input-port)}.
@end deffn

@c begin (scm-doc-string "rdelim.scm" "read-delimited")
@deffn {Scheme Procedure} read-delimited delims [port] [handle-delim]
Read text until one of the characters in the string @var{delims} is found
or end-of-file is reached.  Read from @var{port} if supplied, otherwise
from the value returned by @code{(current-input-port)}.
@var{handle-delim} takes the same values as described for @code{read-line}.
@end deffn

@c begin (scm-doc-string "rdelim.scm" "read-delimited!")
@deffn {Scheme Procedure} read-delimited! delims buf [port] [handle-delim] [start] [end]
Read text into the supplied string @var{buf}.

If a delimiter was found, return the number of characters written,
except if @var{handle-delim} is @code{split}, in which case the return
value is a pair, as noted above.

As a special case, if @var{port} was already at end-of-stream, the EOF
object is returned. Also, if no characters were written because the
buffer was full, @code{#f} is returned.

It's something of a wacky interface, to be honest.
@end deffn

@deffn {Scheme Procedure} write-line obj [port]
@deffnx {C Function} scm_write_line (obj, port)
Display @var{obj} and a newline character to @var{port}.  If
@var{port} is not specified, @code{(current-output-port)} is
used.  This function is equivalent to:
@lisp
(display obj [port])
(newline [port])
@end lisp
@end deffn

In the past, Guile did not have a procedure that would just read out all
of the characters from a port.  As a workaround, many people just called
@code{read-delimited} with no delimiters, knowing that would produce the
behavior they wanted.  This prompted Guile developers to add some
routines that would read all characters from a port.  So it is that
@code{(ice-9 rdelim)} is also the home for procedures that can reading
undelimited text:

@deffn {Scheme Procedure} read-string [port] [count]
Read all of the characters out of @var{port} and return them as a
string.  If the @var{count} is present, treat it as a limit to the
number of characters to read.

By default, read from the current input port, with no size limit on the
result.  This procedure always returns a string, even if no characters
were read.
@end deffn

@deffn {Scheme Procedure} read-string! buf [port] [start] [end]
Fill @var{buf} with characters read from @var{port}, defaulting to the
current input port.  Return the number of characters read.

If @var{start} or @var{end} are specified, store data only into the
substring of @var{str} bounded by @var{start} and @var{end} (which
default to the beginning and end of the string, respectively).
@end deffn

Some of the aforementioned I/O functions rely on the following C
primitives.  These will mainly be of interest to people hacking Guile
internals.

@deffn {Scheme Procedure} %read-delimited! delims str gobble [port [start [end]]]
@deffnx {C Function} scm_read_delimited_x (delims, str, gobble, port, start, end)
Read characters from @var{port} into @var{str} until one of the
characters in the @var{delims} string is encountered.  If
@var{gobble} is true, discard the delimiter character;
otherwise, leave it in the input stream for the next read.  If
@var{port} is not specified, use the value of
@code{(current-input-port)}.  If @var{start} or @var{end} are
specified, store data only into the substring of @var{str}
bounded by @var{start} and @var{end} (which default to the
beginning and end of the string, respectively).

 Return a pair consisting of the delimiter that terminated the
string and the number of characters read.  If reading stopped
at the end of file, the delimiter returned is the
@var{eof-object}; if the string was filled without encountering
a delimiter, this value is @code{#f}.
@end deffn

@deffn {Scheme Procedure} %read-line [port]
@deffnx {C Function} scm_read_line (port)
Read a newline-terminated line from @var{port}, allocating storage as
necessary.  The newline terminator (if any) is removed from the string,
and a pair consisting of the line and its delimiter is returned.  The
delimiter may be either a newline or the @var{eof-object}; if
@code{%read-line} is called at the end of file, it returns the pair
@code{(#<eof> . #<eof>)}.
@end deffn

@node Block Reading and Writing
@subsection Block reading and writing
@cindex Block read/write
@cindex Port, block read/write

The Block-string-I/O module can be accessed with:

@lisp
(use-modules (ice-9 rw))
@end lisp

It currently contains procedures that help to implement the
@code{(scsh rw)} module in guile-scsh.

@deffn {Scheme Procedure} read-string!/partial str [port_or_fdes [start [end]]]
@deffnx {C Function} scm_read_string_x_partial (str, port_or_fdes, start, end)
Read characters from a port or file descriptor into a
string @var{str}.  A port must have an underlying file
descriptor --- a so-called fport.  This procedure is
scsh-compatible and can efficiently read large strings.
It will:

@itemize
@item
attempt to fill the entire string, unless the @var{start}
and/or @var{end} arguments are supplied.  i.e., @var{start}
defaults to 0 and @var{end} defaults to
@code{(string-length str)}
@item
use the current input port if @var{port_or_fdes} is not
supplied.
@item
return fewer than the requested number of characters in some
cases, e.g., on end of file, if interrupted by a signal, or if
not all the characters are immediately available.
@item
wait indefinitely for some input if no characters are
currently available,
unless the port is in non-blocking mode.
@item
read characters from the port's input buffers if available,
instead from the underlying file descriptor.
@item
return @code{#f} if end-of-file is encountered before reading
any characters, otherwise return the number of characters
read.
@item
return 0 if the port is in non-blocking mode and no characters
are immediately available.
@item
return 0 if the request is for 0 bytes, with no
end-of-file check.
@end itemize
@end deffn

@deffn {Scheme Procedure} write-string/partial str [port_or_fdes [start [end]]]
@deffnx {C Function} scm_write_string_partial (str, port_or_fdes, start, end)
Write characters from a string @var{str} to a port or file
descriptor.  A port must have an underlying file descriptor
--- a so-called fport.  This procedure is
scsh-compatible and can efficiently write large strings.
It will:

@itemize
@item
attempt to write the entire string, unless the @var{start}
and/or @var{end} arguments are supplied.  i.e., @var{start}
defaults to 0 and @var{end} defaults to
@code{(string-length str)}
@item
use the current output port if @var{port_of_fdes} is not
supplied.
@item
in the case of a buffered port, store the characters in the
port's output buffer, if all will fit.  If they will not fit
then any existing buffered characters will be flushed
before attempting
to write the new characters directly to the underlying file
descriptor.  If the port is in non-blocking mode and
buffered characters can not be flushed immediately, then an
@code{EAGAIN} system-error exception will be raised (Note:
scsh does not support the use of non-blocking buffered ports.)
@item
write fewer than the requested number of
characters in some cases, e.g., if interrupted by a signal or
if not all of the output can be accepted immediately.
@item
wait indefinitely for at least one character
from @var{str} to be accepted by the port, unless the port is
in non-blocking mode.
@item
return the number of characters accepted by the port.
@item
return 0 if the port is in non-blocking mode and can not accept
at least one character from @var{str} immediately
@item
return 0 immediately if the request size is 0 bytes.
@end itemize
@end deffn

@node Default Ports
@subsection Default Ports for Input, Output and Errors
@cindex Default ports
@cindex Port, default

@rnindex current-input-port
@deffn {Scheme Procedure} current-input-port
@deffnx {C Function} scm_current_input_port ()
@cindex standard input
Return the current input port.  This is the default port used
by many input procedures.

Initially this is the @dfn{standard input} in Unix and C terminology.
When the standard input is a tty the port is unbuffered, otherwise
it's fully buffered.

Unbuffered input is good if an application runs an interactive
subprocess, since any type-ahead input won't go into Guile's buffer
and be unavailable to the subprocess.

Note that Guile buffering is completely separate from the tty ``line
discipline''.  In the usual cooked mode on a tty Guile only sees a
line of input once the user presses @key{Return}.
@end deffn

@rnindex current-output-port
@deffn {Scheme Procedure} current-output-port
@deffnx {C Function} scm_current_output_port ()
@cindex standard output
Return the current output port.  This is the default port used
by many output procedures.

Initially this is the @dfn{standard output} in Unix and C terminology.
When the standard output is a tty this port is unbuffered, otherwise
it's fully buffered.

Unbuffered output to a tty is good for ensuring progress output or a
prompt is seen.  But an application which always prints whole lines
could change to line buffered, or an application with a lot of output
could go fully buffered and perhaps make explicit @code{force-output}
calls (@pxref{Writing}) at selected points.
@end deffn

@deffn {Scheme Procedure} current-error-port
@deffnx {C Function} scm_current_error_port ()
@cindex standard error output
Return the port to which errors and warnings should be sent.

Initially this is the @dfn{standard error} in Unix and C terminology.
When the standard error is a tty this port is unbuffered, otherwise
it's fully buffered.
@end deffn

@deffn {Scheme Procedure} set-current-input-port port
@deffnx {Scheme Procedure} set-current-output-port port
@deffnx {Scheme Procedure} set-current-error-port port
@deffnx {C Function} scm_set_current_input_port (port)
@deffnx {C Function} scm_set_current_output_port (port)
@deffnx {C Function} scm_set_current_error_port (port)
Change the ports returned by @code{current-input-port},
@code{current-output-port} and @code{current-error-port}, respectively,
so that they use the supplied @var{port} for input or output.
@end deffn

@deftypefn {C Function} void scm_dynwind_current_input_port (SCM port)
@deftypefnx {C Function} void scm_dynwind_current_output_port (SCM port)
@deftypefnx {C Function} void scm_dynwind_current_error_port (SCM port)
These functions must be used inside a pair of calls to
@code{scm_dynwind_begin} and @code{scm_dynwind_end} (@pxref{Dynamic
Wind}).  During the dynwind context, the indicated port is set to
@var{port}.

More precisely, the current port is swapped with a `backup' value
whenever the dynwind context is entered or left.  The backup value is
initialized with the @var{port} argument.
@end deftypefn

@node Port Types
@subsection Types of Port
@cindex Types of ports
@cindex Port, types

@menu
* File Ports:: Ports on an operating system file.
* String Ports:: Ports on a Scheme string.
* Soft Ports:: Ports on arbitrary Scheme procedures.
* Void Ports:: Ports on nothing at all.
@end menu


@node File Ports
@subsubsection File Ports
@cindex File port
@cindex Port, file

The following procedures are used to open file ports.
See also @ref{Ports and File Descriptors, open}, for an interface
to the Unix @code{open} system call.

Most systems have limits on how many files can be open, so it's
strongly recommended that file ports be closed explicitly when no
longer required (@pxref{Ports}).

@deffn {Scheme Procedure} open-file filename mode @
                          [#:guess-encoding=#f] [#:encoding=#f]
@deffnx {C Function} scm_open_file_with_encoding @
                     (filename, mode, guess_encoding, encoding)
@deffnx {C Function} scm_open_file (filename, mode)
Open the file whose name is @var{filename}, and return a port
representing that file.  The attributes of the port are
determined by the @var{mode} string.  The way in which this is
interpreted is similar to C stdio.  The first character must be
one of the following:

@table @samp
@item r
Open an existing file for input.
@item w
Open a file for output, creating it if it doesn't already exist
or removing its contents if it does.
@item a
Open a file for output, creating it if it doesn't already
exist.  All writes to the port will go to the end of the file.
The "append mode" can be turned off while the port is in use
@pxref{Ports and File Descriptors, fcntl}
@end table

The following additional characters can be appended:

@table @samp
@item +
Open the port for both input and output.  E.g., @code{r+}: open
an existing file for both input and output.
@item 0
Create an "unbuffered" port.  In this case input and output
operations are passed directly to the underlying port
implementation without additional buffering.  This is likely to
slow down I/O operations.  The buffering mode can be changed
while a port is in use (@pxref{Buffering}).
@item l
Add line-buffering to the port.  The port output buffer will be
automatically flushed whenever a newline character is written.
@item b
Use binary mode, ensuring that each byte in the file will be read as one
Scheme character.

To provide this property, the file will be opened with the 8-bit
character encoding "ISO-8859-1", ignoring the default port encoding.
@xref{Ports}, for more information on port encodings.

Note that while it is possible to read and write binary data as
characters or strings, it is usually better to treat bytes as octets,
and byte sequences as bytevectors.  @xref{R6RS Binary Input}, and
@ref{R6RS Binary Output}, for more.

This option had another historical meaning, for DOS compatibility: in
the default (textual) mode, DOS reads a CR-LF sequence as one LF byte.
The @code{b} flag prevents this from happening, adding @code{O_BINARY}
to the underlying @code{open} call.  Still, the flag is generally useful
because of its port encoding ramifications.
@end table

Unless binary mode is requested, the character encoding of the new port
is determined as follows: First, if @var{guess-encoding} is true, the
@code{file-encoding} procedure is used to guess the encoding of the file
(@pxref{Character Encoding of Source Files}).  If @var{guess-encoding}
is false or if @code{file-encoding} fails, @var{encoding} is used unless
it is also false.  As a last resort, the default port encoding is used.
@xref{Ports}, for more information on port encodings.  It is an error to
pass a non-false @var{guess-encoding} or @var{encoding} if binary mode
is requested.

If a file cannot be opened with the access requested, @code{open-file}
throws an exception.
@end deffn

@rnindex open-input-file
@deffn {Scheme Procedure} open-input-file filename @
       [#:guess-encoding=#f] [#:encoding=#f] [#:binary=#f]

Open @var{filename} for input.  If @var{binary} is true, open the port
in binary mode, otherwise use text mode.  @var{encoding} and
@var{guess-encoding} determine the character encoding as described above
for @code{open-file}.  Equivalent to
@lisp
(open-file @var{filename}
           (if @var{binary} "rb" "r")
           #:guess-encoding @var{guess-encoding}
           #:encoding @var{encoding})
@end lisp
@end deffn

@rnindex open-output-file
@deffn {Scheme Procedure} open-output-file filename @
       [#:encoding=#f] [#:binary=#f]

Open @var{filename} for output.  If @var{binary} is true, open the port
in binary mode, otherwise use text mode.  @var{encoding} specifies the
character encoding as described above for @code{open-file}.  Equivalent
to
@lisp
(open-file @var{filename}
           (if @var{binary} "wb" "w")
           #:encoding @var{encoding})
@end lisp
@end deffn

@deffn {Scheme Procedure} call-with-input-file filename proc @
        [#:guess-encoding=#f] [#:encoding=#f] [#:binary=#f]
@deffnx {Scheme Procedure} call-with-output-file filename proc @
        [#:encoding=#f] [#:binary=#f]
@rnindex call-with-input-file
@rnindex call-with-output-file
Open @var{filename} for input or output, and call @code{(@var{proc}
port)} with the resulting port.  Return the value returned by
@var{proc}.  @var{filename} is opened as per @code{open-input-file} or
@code{open-output-file} respectively, and an error is signaled if it
cannot be opened.

When @var{proc} returns, the port is closed.  If @var{proc} does not
return (e.g.@: if it throws an error), then the port might not be
closed automatically, though it will be garbage collected in the usual
way if not otherwise referenced.
@end deffn

@deffn {Scheme Procedure} with-input-from-file filename thunk @
        [#:guess-encoding=#f] [#:encoding=#f] [#:binary=#f]
@deffnx {Scheme Procedure} with-output-to-file filename thunk @
        [#:encoding=#f] [#:binary=#f]
@deffnx {Scheme Procedure} with-error-to-file filename thunk @
        [#:encoding=#f] [#:binary=#f]
@rnindex with-input-from-file
@rnindex with-output-to-file
Open @var{filename} and call @code{(@var{thunk})} with the new port
setup as respectively the @code{current-input-port},
@code{current-output-port}, or @code{current-error-port}.  Return the
value returned by @var{thunk}.  @var{filename} is opened as per
@code{open-input-file} or @code{open-output-file} respectively, and an
error is signaled if it cannot be opened.

When @var{thunk} returns, the port is closed and the previous setting
of the respective current port is restored.

The current port setting is managed with @code{dynamic-wind}, so the
previous value is restored no matter how @var{thunk} exits (eg.@: an
exception), and if @var{thunk} is re-entered (via a captured
continuation) then it's set again to the @var{filename} port.

The port is closed when @var{thunk} returns normally, but not when
exited via an exception or new continuation.  This ensures it's still
ready for use if @var{thunk} is re-entered by a captured continuation.
Of course the port is always garbage collected and closed in the usual
way when no longer referenced anywhere.
@end deffn

@deffn {Scheme Procedure} port-mode port
@deffnx {C Function} scm_port_mode (port)
Return the port modes associated with the open port @var{port}.
These will not necessarily be identical to the modes used when
the port was opened, since modes such as "append" which are
used only during port creation are not retained.
@end deffn

@deffn {Scheme Procedure} port-filename port
@deffnx {C Function} scm_port_filename (port)
Return the filename associated with @var{port}, or @code{#f} if no
filename is associated with the port.

@var{port} must be open, @code{port-filename} cannot be used once the
port is closed.
@end deffn

@deffn {Scheme Procedure} set-port-filename! port filename
@deffnx {C Function} scm_set_port_filename_x (port, filename)
Change the filename associated with @var{port}, using the current input
port if none is specified.  Note that this does not change the port's
source of data, but only the value that is returned by
@code{port-filename} and reported in diagnostic output.
@end deffn

@deffn {Scheme Procedure} file-port? obj
@deffnx {C Function} scm_file_port_p (obj)
Determine whether @var{obj} is a port that is related to a file.
@end deffn


@node String Ports
@subsubsection String Ports
@cindex String port
@cindex Port, string

The following allow string ports to be opened by analogy to R4RS
file port facilities:

With string ports, the port-encoding is treated differently than other
types of ports.  When string ports are created, they do not inherit a
character encoding from the current locale.  They are given a
default locale that allows them to handle all valid string characters.
Typically one should not modify a string port's character encoding
away from its default.

@deffn {Scheme Procedure} call-with-output-string proc
@deffnx {C Function} scm_call_with_output_string (proc)
Calls the one-argument procedure @var{proc} with a newly created output
port.  When the function returns, the string composed of the characters
written into the port is returned.  @var{proc} should not close the port.
@end deffn

@deffn {Scheme Procedure} call-with-input-string string proc
@deffnx {C Function} scm_call_with_input_string (string, proc)
Calls the one-argument procedure @var{proc} with a newly
created input port from which @var{string}'s contents may be
read.  The value yielded by the @var{proc} is returned.
@end deffn

@deffn {Scheme Procedure} with-output-to-string thunk
Calls the zero-argument procedure @var{thunk} with the current output
port set temporarily to a new string port.  It returns a string
composed of the characters written to the current output.
@end deffn

@deffn {Scheme Procedure} with-input-from-string string thunk
Calls the zero-argument procedure @var{thunk} with the current input
port set temporarily to a string port opened on the specified
@var{string}.  The value yielded by @var{thunk} is returned.
@end deffn

@deffn {Scheme Procedure} open-input-string str
@deffnx {C Function} scm_open_input_string (str)
Take a string and return an input port that delivers characters
from the string. The port can be closed by
@code{close-input-port}, though its storage will be reclaimed
by the garbage collector if it becomes inaccessible.
@end deffn

@deffn {Scheme Procedure} open-output-string
@deffnx {C Function} scm_open_output_string ()
Return an output port that will accumulate characters for
retrieval by @code{get-output-string}. The port can be closed
by the procedure @code{close-output-port}, though its storage
will be reclaimed by the garbage collector if it becomes
inaccessible.
@end deffn

@deffn {Scheme Procedure} get-output-string port
@deffnx {C Function} scm_get_output_string (port)
Given an output port created by @code{open-output-string},
return a string consisting of the characters that have been
output to the port so far.

@code{get-output-string} must be used before closing @var{port}, once
closed the string cannot be obtained.
@end deffn

A string port can be used in many procedures which accept a port
but which are not dependent on implementation details of fports.
E.g., seeking and truncating will work on a string port,
but trying to extract the file descriptor number will fail.


@node Soft Ports
@subsubsection Soft Ports
@cindex Soft port
@cindex Port, soft

A @dfn{soft-port} is a port based on a vector of procedures capable of
accepting or delivering characters.  It allows emulation of I/O ports.

@deffn {Scheme Procedure} make-soft-port pv modes
@deffnx {C Function} scm_make_soft_port (pv, modes)
Return a port capable of receiving or delivering characters as
specified by the @var{modes} string (@pxref{File Ports,
open-file}).  @var{pv} must be a vector of length 5 or 6.  Its
components are as follows:

@enumerate 0
@item
procedure accepting one character for output
@item
procedure accepting a string for output
@item
thunk for flushing output
@item
thunk for getting one character
@item
thunk for closing port (not by garbage collection)
@item
(if present and not @code{#f}) thunk for computing the number of
characters that can be read from the port without blocking.
@end enumerate

For an output-only port only elements 0, 1, 2, and 4 need be
procedures.  For an input-only port only elements 3 and 4 need
be procedures.  Thunks 2 and 4 can instead be @code{#f} if
there is no useful operation for them to perform.

If thunk 3 returns @code{#f} or an @code{eof-object}
(@pxref{Input, eof-object?, ,r5rs, The Revised^5 Report on
Scheme}) it indicates that the port has reached end-of-file.
For example:

@lisp
(define stdout (current-output-port))
(define p (make-soft-port
           (vector
            (lambda (c) (write c stdout))
            (lambda (s) (display s stdout))
            (lambda () (display "." stdout))
            (lambda () (char-upcase (read-char)))
            (lambda () (display "@@" stdout)))
           "rw"))

(write p p) @result{} #<input-output: soft 8081e20>
@end lisp
@end deffn


@node Void Ports
@subsubsection Void Ports
@cindex Void port
@cindex Port, void

This kind of port causes any data to be discarded when written to, and
always returns the end-of-file object when read from.

@deffn {Scheme Procedure} %make-void-port mode
@deffnx {C Function} scm_sys_make_void_port (mode)
Create and return a new void port.  A void port acts like
@file{/dev/null}.  The @var{mode} argument
specifies the input/output modes for this port: see the
documentation for @code{open-file} in @ref{File Ports}.
@end deffn


@node R6RS I/O Ports
@subsection R6RS I/O Ports

@cindex R6RS
@cindex R6RS ports

The I/O port API of the @uref{http://www.r6rs.org/, Revised Report^6 on
the Algorithmic Language Scheme (R6RS)} is provided by the @code{(rnrs
io ports)} module.  It provides features, such as binary I/O and Unicode
string I/O, that complement or refine Guile's historical port API
presented above (@pxref{Input and Output}). Note that R6RS ports are not
disjoint from Guile's native ports, so Guile-specific procedures will
work on ports created using the R6RS API, and vice versa.

The text in this section is taken from the R6RS standard libraries
document, with only minor adaptions for inclusion in this manual.  The
Guile developers offer their thanks to the R6RS editors for having
provided the report's text under permissive conditions making this
possible.

@c FIXME: Update description when implemented.
@emph{Note}: The implementation of this R6RS API is not complete yet.

@menu
* R6RS File Names::             File names.
* R6RS File Options::           Options for opening files.
* R6RS Buffer Modes::           Influencing buffering behavior.
* R6RS Transcoders::            Influencing port encoding.
* R6RS End-of-File::            The end-of-file object.
* R6RS Port Manipulation::      Manipulating R6RS ports.
* R6RS Input Ports::            Input Ports.
* R6RS Binary Input::           Binary input.
* R6RS Textual Input::          Textual input.
* R6RS Output Ports::           Output Ports.
* R6RS Binary Output::          Binary output.
* R6RS Textual Output::         Textual output.
@end menu

A subset of the @code{(rnrs io ports)} module, plus one non-standard
procedure @code{unget-bytevector} (@pxref{R6RS Binary Input}), is
provided by the @code{(ice-9 binary-ports)} module.  It contains binary
input/output procedures and does not rely on R6RS support.

@node R6RS File Names
@subsubsection File Names

Some of the procedures described in this chapter accept a file name as an
argument. Valid values for such a file name include strings that name a file
using the native notation of file system paths on an implementation's
underlying operating system, and may include implementation-dependent
values as well.

A @var{filename} parameter name means that the
corresponding argument must be a file name.

@node R6RS File Options
@subsubsection File Options
@cindex file options

When opening a file, the various procedures in this library accept a
@code{file-options} object that encapsulates flags to specify how the
file is to be opened. A @code{file-options} object is an enum-set
(@pxref{rnrs enums}) over the symbols constituting valid file options.

A @var{file-options} parameter name means that the corresponding
argument must be a file-options object.

@deffn {Scheme Syntax} file-options @var{file-options-symbol} ...

Each @var{file-options-symbol} must be a symbol.

The @code{file-options} syntax returns a file-options object that
encapsulates the specified options.

When supplied to an operation that opens a file for output, the
file-options object returned by @code{(file-options)} specifies that the
file is created if it does not exist and an exception with condition
type @code{&i/o-file-already-exists} is raised if it does exist.  The
following standard options can be included to modify the default
behavior.

@table @code
@item no-create
      If the file does not already exist, it is not created;
      instead, an exception with condition type @code{&i/o-file-does-not-exist}
      is raised.
      If the file already exists, the exception with condition type
      @code{&i/o-file-already-exists} is not raised
      and the file is truncated to zero length.
@item no-fail
      If the file already exists, the exception with condition type
      @code{&i/o-file-already-exists} is not raised,
      even if @code{no-create} is not included,
      and the file is truncated to zero length.
@item no-truncate
      If the file already exists and the exception with condition type
      @code{&i/o-file-already-exists} has been inhibited by inclusion of
      @code{no-create} or @code{no-fail}, the file is not truncated, but
      the port's current position is still set to the beginning of the
      file.
@end table

These options have no effect when a file is opened only for input.
Symbols other than those listed above may be used as
@var{file-options-symbol}s; they have implementation-specific meaning,
if any.

@quotation Note
  Only the name of @var{file-options-symbol} is significant.
@end quotation
@end deffn

@node R6RS Buffer Modes
@subsubsection Buffer Modes

Each port has an associated buffer mode.  For an output port, the
buffer mode defines when an output operation flushes the buffer
associated with the output port.  For an input port, the buffer mode
defines how much data will be read to satisfy read operations.  The
possible buffer modes are the symbols @code{none} for no buffering,
@code{line} for flushing upon line endings and reading up to line
endings, or other implementation-dependent behavior,
and @code{block} for arbitrary buffering.  This section uses
the parameter name @var{buffer-mode} for arguments that must be
buffer-mode symbols.

If two ports are connected to the same mutable source, both ports
are unbuffered, and reading a byte or character from that shared
source via one of the two ports would change the bytes or characters
seen via the other port, a lookahead operation on one port will
render the peeked byte or character inaccessible via the other port,
while a subsequent read operation on the peeked port will see the
peeked byte or character even though the port is otherwise unbuffered.

In other words, the semantics of buffering is defined in terms of side
effects on shared mutable sources, and a lookahead operation has the
same side effect on the shared source as a read operation.

@deffn {Scheme Syntax} buffer-mode @var{buffer-mode-symbol}

@var{buffer-mode-symbol} must be a symbol whose name is one of
@code{none}, @code{line}, and @code{block}. The result is the
corresponding symbol, and specifies the associated buffer mode.

@quotation Note
  Only the name of @var{buffer-mode-symbol} is significant.
@end quotation
@end deffn

@deffn {Scheme Procedure} buffer-mode?  obj
Returns @code{#t} if the argument is a valid buffer-mode symbol, and
returns @code{#f} otherwise.
@end deffn

@node R6RS Transcoders
@subsubsection Transcoders
@cindex codec
@cindex end-of-line style
@cindex transcoder
@cindex binary port
@cindex textual port

Several different Unicode encoding schemes describe standard ways to
encode characters and strings as byte sequences and to decode those
sequences. Within this document, a @dfn{codec} is an immutable Scheme
object that represents a Unicode or similar encoding scheme.

An @dfn{end-of-line style} is a symbol that, if it is not @code{none},
describes how a textual port transcodes representations of line endings.

A @dfn{transcoder} is an immutable Scheme object that combines a codec
with an end-of-line style and a method for handling decoding errors.
Each transcoder represents some specific bidirectional (but not
necessarily lossless), possibly stateful translation between byte
sequences and Unicode characters and strings.  Every transcoder can
operate in the input direction (bytes to characters) or in the output
direction (characters to bytes).  A @var{transcoder} parameter name
means that the corresponding argument must be a transcoder.

A @dfn{binary port} is a port that supports binary I/O, does not have an
associated transcoder and does not support textual I/O.  A @dfn{textual
port} is a port that supports textual I/O, and does not support binary
I/O.  A textual port may or may not have an associated transcoder.

@deffn {Scheme Procedure} latin-1-codec
@deffnx {Scheme Procedure} utf-8-codec
@deffnx {Scheme Procedure} utf-16-codec

These are predefined codecs for the ISO 8859-1, UTF-8, and UTF-16
encoding schemes.

A call to any of these procedures returns a value that is equal in the
sense of @code{eqv?} to the result of any other call to the same
procedure.
@end deffn

@deffn {Scheme Syntax} eol-style @var{eol-style-symbol}

@var{eol-style-symbol} should be a symbol whose name is one of
@code{lf}, @code{cr}, @code{crlf}, @code{nel}, @code{crnel}, @code{ls},
and @code{none}.

The form evaluates to the corresponding symbol.  If the name of
@var{eol-style-symbol} is not one of these symbols, the effect and
result are implementation-dependent; in particular, the result may be an
eol-style symbol acceptable as an @var{eol-style} argument to
@code{make-transcoder}.  Otherwise, an exception is raised.

All eol-style symbols except @code{none} describe a specific
line-ending encoding:

@table @code
@item lf
linefeed
@item cr
carriage return
@item crlf
carriage return, linefeed
@item nel
next line
@item crnel
carriage return, next line
@item ls
line separator
@end table

For a textual port with a transcoder, and whose transcoder has an
eol-style symbol @code{none}, no conversion occurs.  For a textual input
port, any eol-style symbol other than @code{none} means that all of the
above line-ending encodings are recognized and are translated into a
single linefeed.  For a textual output port, @code{none} and @code{lf}
are equivalent.  Linefeed characters are encoded according to the
specified eol-style symbol, and all other characters that participate in
possible line endings are encoded as is.

@quotation Note
  Only the name of @var{eol-style-symbol} is significant.
@end quotation
@end deffn

@deffn {Scheme Procedure} native-eol-style
Returns the default end-of-line style of the underlying platform, e.g.,
@code{lf} on Unix and @code{crlf} on Windows.
@end deffn

@deffn {Condition Type} &i/o-decoding
@deffnx {Scheme Procedure} make-i/o-decoding-error  port
@deffnx {Scheme Procedure} i/o-decoding-error?  obj

This condition type could be defined by

@lisp
(define-condition-type &i/o-decoding &i/o-port
  make-i/o-decoding-error i/o-decoding-error?)
@end lisp

An exception with this type is raised when one of the operations for
textual input from a port encounters a sequence of bytes that cannot be
translated into a character or string by the input direction of the
port's transcoder.

When such an exception is raised, the port's position is past the
invalid encoding.
@end deffn

@deffn {Condition Type} &i/o-encoding
@deffnx {Scheme Procedure} make-i/o-encoding-error  port char
@deffnx {Scheme Procedure} i/o-encoding-error?  obj
@deffnx {Scheme Procedure} i/o-encoding-error-char  condition

This condition type could be defined by

@lisp
(define-condition-type &i/o-encoding &i/o-port
  make-i/o-encoding-error i/o-encoding-error?
  (char i/o-encoding-error-char))
@end lisp

An exception with this type is raised when one of the operations for
textual output to a port encounters a character that cannot be
translated into bytes by the output direction of the port's transcoder.
@var{char} is the character that could not be encoded.
@end deffn

@deffn {Scheme Syntax} error-handling-mode @var{error-handling-mode-symbol}

@var{error-handling-mode-symbol} should be a symbol whose name is one of
@code{ignore}, @code{raise}, and @code{replace}. The form evaluates to
the corresponding symbol.  If @var{error-handling-mode-symbol} is not
one of these identifiers, effect and result are
implementation-dependent: The result may be an error-handling-mode
symbol acceptable as a @var{handling-mode} argument to
@code{make-transcoder}.  If it is not acceptable as a
@var{handling-mode} argument to @code{make-transcoder}, an exception is
raised.

@quotation Note
  Only the name of @var{error-handling-mode-symbol} is significant.
@end quotation

The error-handling mode of a transcoder specifies the behavior
of textual I/O operations in the presence of encoding or decoding
errors.

If a textual input operation encounters an invalid or incomplete
character encoding, and the error-handling mode is @code{ignore}, an
appropriate number of bytes of the invalid encoding are ignored and
decoding continues with the following bytes.

If the error-handling mode is @code{replace}, the replacement
character U+FFFD is injected into the data stream, an appropriate
number of bytes are ignored, and decoding
continues with the following bytes.

If the error-handling mode is @code{raise}, an exception with condition
type @code{&i/o-decoding} is raised.

If a textual output operation encounters a character it cannot encode,
and the error-handling mode is @code{ignore}, the character is ignored
and encoding continues with the next character.  If the error-handling
mode is @code{replace}, a codec-specific replacement character is
emitted by the transcoder, and encoding continues with the next
character.  The replacement character is U+FFFD for transcoders whose
codec is one of the Unicode encodings, but is the @code{?}  character
for the Latin-1 encoding.  If the error-handling mode is @code{raise},
an exception with condition type @code{&i/o-encoding} is raised.
@end deffn

@deffn {Scheme Procedure} make-transcoder  codec
@deffnx {Scheme Procedure} make-transcoder codec eol-style
@deffnx {Scheme Procedure} make-transcoder codec eol-style handling-mode

@var{codec} must be a codec; @var{eol-style}, if present, an eol-style
symbol; and @var{handling-mode}, if present, an error-handling-mode
symbol.

@var{eol-style} may be omitted, in which case it defaults to the native
end-of-line style of the underlying platform.  @var{handling-mode} may
be omitted, in which case it defaults to @code{replace}.  The result is
a transcoder with the behavior specified by its arguments.
@end deffn

@deffn {Scheme procedure} native-transcoder
Returns an implementation-dependent transcoder that represents a
possibly locale-dependent ``native'' transcoding.
@end deffn

@deffn {Scheme Procedure} transcoder-codec  transcoder
@deffnx {Scheme Procedure} transcoder-eol-style  transcoder
@deffnx {Scheme Procedure} transcoder-error-handling-mode  transcoder

These are accessors for transcoder objects; when applied to a
transcoder returned by @code{make-transcoder}, they return the
@var{codec}, @var{eol-style}, and @var{handling-mode} arguments,
respectively.
@end deffn

@deffn {Scheme Procedure} bytevector->string  bytevector transcoder

Returns the string that results from transcoding the
@var{bytevector} according to the input direction of the transcoder.
@end deffn

@deffn {Scheme Procedure} string->bytevector  string transcoder

Returns the bytevector that results from transcoding the
@var{string} according to the output direction of the transcoder.
@end deffn

@node R6RS End-of-File
@subsubsection The End-of-File Object

@cindex EOF
@cindex end-of-file

R5RS' @code{eof-object?} procedure is provided by the @code{(rnrs io
ports)} module:

@deffn {Scheme Procedure} eof-object? obj
@deffnx {C Function} scm_eof_object_p (obj)
Return true if @var{obj} is the end-of-file (EOF) object.
@end deffn

In addition, the following procedure is provided:

@deffn {Scheme Procedure} eof-object
@deffnx {C Function} scm_eof_object ()
Return the end-of-file (EOF) object.

@lisp
(eof-object? (eof-object))
@result{} #t
@end lisp
@end deffn


@node R6RS Port Manipulation
@subsubsection Port Manipulation

The procedures listed below operate on any kind of R6RS I/O port.

@deffn {Scheme Procedure} port? obj
Returns @code{#t} if the argument is a port, and returns @code{#f}
otherwise.
@end deffn

@deffn {Scheme Procedure} port-transcoder port
Returns the transcoder associated with @var{port} if @var{port} is
textual and has an associated transcoder, and returns @code{#f} if
@var{port} is binary or does not have an associated transcoder.
@end deffn

@deffn {Scheme Procedure} binary-port? port
Return @code{#t} if @var{port} is a @dfn{binary port}, suitable for
binary data input/output.

Note that internally Guile does not differentiate between binary and
textual ports, unlike the R6RS.  Thus, this procedure returns true when
@var{port} does not have an associated encoding---i.e., when
@code{(port-encoding @var{port})} is @code{#f} (@pxref{Ports,
port-encoding}).  This is the case for ports returned by R6RS procedures
such as @code{open-bytevector-input-port} and
@code{make-custom-binary-output-port}.

However, Guile currently does not prevent use of textual I/O procedures
such as @code{display} or @code{read-char} with binary ports.  Doing so
``upgrades'' the port from binary to textual, under the ISO-8859-1
encoding.  Likewise, Guile does not prevent use of
@code{set-port-encoding!} on a binary port, which also turns it into a
``textual'' port.
@end deffn

@deffn {Scheme Procedure} textual-port? port
Always return @code{#t}, as all ports can be used for textual I/O in
Guile.
@end deffn

@deffn {Scheme Procedure} transcoded-port binary-port transcoder
The @code{transcoded-port} procedure
returns a new textual port with the specified @var{transcoder}.
Otherwise the new textual port's state is largely the same as
that of @var{binary-port}.
If @var{binary-port} is an input port, the new textual
port will be an input port and
will transcode the bytes that have not yet been read from
@var{binary-port}.
If @var{binary-port} is an output port, the new textual
port will be an output port and
will transcode output characters into bytes that are
written to the byte sink represented by @var{binary-port}.

As a side effect, however, @code{transcoded-port}
closes @var{binary-port} in
a special way that allows the new textual port to continue to
use the byte source or sink represented by @var{binary-port},
even though @var{binary-port} itself is closed and cannot
be used by the input and output operations described in this
chapter.
@end deffn

@deffn {Scheme Procedure} port-position port
If @var{port} supports it (see below), return the offset (an integer)
indicating where the next octet will be read from/written to in
@var{port}.  If @var{port} does not support this operation, an error
condition is raised.

This is similar to Guile's @code{seek} procedure with the
@code{SEEK_CUR} argument (@pxref{Random Access}).
@end deffn

@deffn {Scheme Procedure} port-has-port-position? port
Return @code{#t} is @var{port} supports @code{port-position}.
@end deffn

@deffn {Scheme Procedure} set-port-position! port offset
If @var{port} supports it (see below), set the position where the next
octet will be read from/written to @var{port} to @var{offset} (an
integer).  If @var{port} does not support this operation, an error
condition is raised.

This is similar to Guile's @code{seek} procedure with the
@code{SEEK_SET} argument (@pxref{Random Access}).
@end deffn

@deffn {Scheme Procedure} port-has-set-port-position!? port
Return @code{#t} is @var{port} supports @code{set-port-position!}.
@end deffn

@deffn {Scheme Procedure} call-with-port port proc
Call @var{proc}, passing it @var{port} and closing @var{port} upon exit
of @var{proc}.  Return the return values of @var{proc}.
@end deffn

@node R6RS Input Ports
@subsubsection Input Ports

@deffn {Scheme Procedure} input-port? obj
Returns @code{#t} if the argument is an input port (or a combined input
and output port), and returns @code{#f} otherwise.
@end deffn

@deffn {Scheme Procedure} port-eof? input-port
Returns @code{#t}
if the @code{lookahead-u8} procedure (if @var{input-port} is a binary port)
or the @code{lookahead-char} procedure (if @var{input-port} is a textual port)
would return
the end-of-file object, and @code{#f} otherwise.
The operation may block indefinitely if no data is available
but the port cannot be determined to be at end of file.
@end deffn

@deffn {Scheme Procedure} open-file-input-port filename
@deffnx {Scheme Procedure} open-file-input-port filename file-options
@deffnx {Scheme Procedure} open-file-input-port filename file-options buffer-mode
@deffnx {Scheme Procedure} open-file-input-port filename file-options buffer-mode maybe-transcoder
@var{maybe-transcoder} must be either a transcoder or @code{#f}.

The @code{open-file-input-port} procedure returns an
input port for the named file. The @var{file-options} and
@var{maybe-transcoder} arguments are optional.

The @var{file-options} argument, which may determine
various aspects of the returned port (@pxref{R6RS File Options}),
defaults to the value of @code{(file-options)}.

The @var{buffer-mode} argument, if supplied,
must be one of the symbols that name a buffer mode.
The @var{buffer-mode} argument defaults to @code{block}.

If @var{maybe-transcoder} is a transcoder, it becomes the transcoder associated
with the returned port.

If @var{maybe-transcoder} is @code{#f} or absent,
the port will be a binary port and will support the
@code{port-position} and @code{set-port-position!}  operations.
Otherwise the port will be a textual port, and whether it supports
the @code{port-position} and @code{set-port-position!} operations
is implementation-dependent (and possibly transcoder-dependent).
@end deffn

@deffn {Scheme Procedure} standard-input-port
Returns a fresh binary input port connected to standard input.  Whether
the port supports the @code{port-position} and @code{set-port-position!}
operations is implementation-dependent.
@end deffn

@deffn {Scheme Procedure} current-input-port
This returns a default textual port for input.  Normally, this default
port is associated with standard input, but can be dynamically
re-assigned using the @code{with-input-from-file} procedure from the
@code{io simple (6)} library (@pxref{rnrs io simple}).  The port may or
may not have an associated transcoder; if it does, the transcoder is
implementation-dependent.
@end deffn

@node R6RS Binary Input
@subsubsection Binary Input

@cindex binary input

R6RS binary input ports can be created with the procedures described
below.

@deffn {Scheme Procedure} open-bytevector-input-port bv [transcoder]
@deffnx {C Function} scm_open_bytevector_input_port (bv, transcoder)
Return an input port whose contents are drawn from bytevector @var{bv}
(@pxref{Bytevectors}).

@c FIXME: Update description when implemented.
The @var{transcoder} argument is currently not supported.
@end deffn

@cindex custom binary input ports

@deffn {Scheme Procedure} make-custom-binary-input-port id read! get-position set-position! close
@deffnx {C Function} scm_make_custom_binary_input_port (id, read!, get-position, set-position!, close)
Return a new custom binary input port@footnote{This is similar in spirit
to Guile's @dfn{soft ports} (@pxref{Soft Ports}).} named @var{id} (a
string) whose input is drained by invoking @var{read!} and passing it a
bytevector, an index where bytes should be written, and the number of
bytes to read.  The @code{read!}  procedure must return an integer
indicating the number of bytes read, or @code{0} to indicate the
end-of-file.

Optionally, if @var{get-position} is not @code{#f}, it must be a thunk
that will be called when @code{port-position} is invoked on the custom
binary port and should return an integer indicating the position within
the underlying data stream; if @var{get-position} was not supplied, the
returned port does not support @code{port-position}.

Likewise, if @var{set-position!} is not @code{#f}, it should be a
one-argument procedure.  When @code{set-port-position!} is invoked on the
custom binary input port, @var{set-position!} is passed an integer
indicating the position of the next byte is to read.

Finally, if @var{close} is not @code{#f}, it must be a thunk.  It is
invoked when the custom binary input port is closed.

The returned port is fully buffered by default, but its buffering mode
can be changed using @code{setvbuf} (@pxref{Buffering}).

Using a custom binary input port, the @code{open-bytevector-input-port}
procedure could be implemented as follows:

@lisp
(define (open-bytevector-input-port source)
  (define position 0)
  (define length (bytevector-length source))

  (define (read! bv start count)
    (let ((count (min count (- length position))))
      (bytevector-copy! source position
                        bv start count)
      (set! position (+ position count))
      count))

  (define (get-position) position)

  (define (set-position! new-position)
    (set! position new-position))

  (make-custom-binary-input-port "the port" read!
                                  get-position
                                  set-position!))

(read (open-bytevector-input-port (string->utf8 "hello")))
@result{} hello
@end lisp
@end deffn

@cindex binary input
Binary input is achieved using the procedures below:

@deffn {Scheme Procedure} get-u8 port
@deffnx {C Function} scm_get_u8 (port)
Return an octet read from @var{port}, a binary input port, blocking as
necessary, or the end-of-file object.
@end deffn

@deffn {Scheme Procedure} lookahead-u8 port
@deffnx {C Function} scm_lookahead_u8 (port)
Like @code{get-u8} but does not update @var{port}'s position to point
past the octet.
@end deffn

@deffn {Scheme Procedure} get-bytevector-n port count
@deffnx {C Function} scm_get_bytevector_n (port, count)
Read @var{count} octets from @var{port}, blocking as necessary and
return a bytevector containing the octets read.  If fewer bytes are
available, a bytevector smaller than @var{count} is returned.
@end deffn

@deffn {Scheme Procedure} get-bytevector-n! port bv start count
@deffnx {C Function} scm_get_bytevector_n_x (port, bv, start, count)
Read @var{count} bytes from @var{port} and store them in @var{bv}
starting at index @var{start}.  Return either the number of bytes
actually read or the end-of-file object.
@end deffn

@deffn {Scheme Procedure} get-bytevector-some port
@deffnx {C Function} scm_get_bytevector_some (port)
Read from @var{port}, blocking as necessary, until bytes are available
or an end-of-file is reached.  Return either the end-of-file object or a
new bytevector containing some of the available bytes (at least one),
and update the port position to point just past these bytes.
@end deffn

@deffn {Scheme Procedure} get-bytevector-all port
@deffnx {C Function} scm_get_bytevector_all (port)
Read from @var{port}, blocking as necessary, until the end-of-file is
reached.  Return either a new bytevector containing the data read or the
end-of-file object (if no data were available).
@end deffn

The @code{(ice-9 binary-ports)} module provides the following procedure
as an extension to @code{(rnrs io ports)}:

@deffn {Scheme Procedure} unget-bytevector port bv [start [count]]
@deffnx {C Function} scm_unget_bytevector (port, bv, start, count)
Place the contents of @var{bv} in @var{port}, optionally starting at
index @var{start} and limiting to @var{count} octets, so that its bytes
will be read from left-to-right as the next bytes from @var{port} during
subsequent read operations.  If called multiple times, the unread bytes
will be read again in last-in first-out order.
@end deffn

@node R6RS Textual Input
@subsubsection Textual Input

@deffn {Scheme Procedure} get-char textual-input-port
Reads from @var{textual-input-port}, blocking as necessary, until a
complete character is available from @var{textual-input-port},
or until an end of file is reached.

If a complete character is available before the next end of file,
@code{get-char} returns that character and updates the input port to
point past the character. If an end of file is reached before any
character is read, @code{get-char} returns the end-of-file object.
@end deffn

@deffn {Scheme Procedure} lookahead-char textual-input-port
The @code{lookahead-char} procedure is like @code{get-char}, but it does
not update @var{textual-input-port} to point past the character.
@end deffn

@deffn {Scheme Procedure} get-string-n textual-input-port count

@var{count} must be an exact, non-negative integer object, representing
the number of characters to be read.

The @code{get-string-n} procedure reads from @var{textual-input-port},
blocking as necessary, until @var{count} characters are available, or
until an end of file is reached.

If @var{count} characters are available before end of file,
@code{get-string-n} returns a string consisting of those @var{count}
characters. If fewer characters are available before an end of file, but
one or more characters can be read, @code{get-string-n} returns a string
containing those characters. In either case, the input port is updated
to point just past the characters read. If no characters can be read
before an end of file, the end-of-file object is returned.
@end deffn

@deffn {Scheme Procedure} get-string-n! textual-input-port string start count

@var{start} and @var{count} must be exact, non-negative integer objects,
with @var{count} representing the number of characters to be read.
@var{string} must be a string with at least $@var{start} + @var{count}$
characters.

The @code{get-string-n!} procedure reads from @var{textual-input-port}
in the same manner as @code{get-string-n}.  If @var{count} characters
are available before an end of file, they are written into @var{string}
starting at index @var{start}, and @var{count} is returned. If fewer
characters are available before an end of file, but one or more can be
read, those characters are written into @var{string} starting at index
@var{start} and the number of characters actually read is returned as an
exact integer object. If no characters can be read before an end of
file, the end-of-file object is returned.
@end deffn

@deffn {Scheme Procedure} get-string-all textual-input-port
Reads from @var{textual-input-port} until an end of file, decoding
characters in the same manner as @code{get-string-n} and
@code{get-string-n!}.

If characters are available before the end of file, a string containing
all the characters decoded from that data are returned. If no character
precedes the end of file, the end-of-file object is returned.
@end deffn

@deffn {Scheme Procedure} get-line textual-input-port
Reads from @var{textual-input-port} up to and including the linefeed
character or end of file, decoding characters in the same manner as
@code{get-string-n} and @code{get-string-n!}.

If a linefeed character is read, a string containing all of the text up
to (but not including) the linefeed character is returned, and the port
is updated to point just past the linefeed character. If an end of file
is encountered before any linefeed character is read, but some
characters have been read and decoded as characters, a string containing
those characters is returned. If an end of file is encountered before
any characters are read, the end-of-file object is returned.

@quotation Note
  The end-of-line style, if not @code{none}, will cause all line endings
  to be read as linefeed characters.  @xref{R6RS Transcoders}.
@end quotation
@end deffn

@deffn {Scheme Procedure} get-datum textual-input-port count
Reads an external representation from @var{textual-input-port} and returns the
datum it represents.  The @code{get-datum} procedure returns the next
datum that can be parsed from the given @var{textual-input-port}, updating
@var{textual-input-port} to point exactly past the end of the external
representation of the object.

Any @emph{interlexeme space} (comment or whitespace, @pxref{Scheme
Syntax}) in the input is first skipped.  If an end of file occurs after
the interlexeme space, the end-of-file object (@pxref{R6RS End-of-File})
is returned.

If a character inconsistent with an external representation is
encountered in the input, an exception with condition types
@code{&lexical} and @code{&i/o-read} is raised.  Also, if the end of
file is encountered after the beginning of an external representation,
but the external representation is incomplete and therefore cannot be
parsed, an exception with condition types @code{&lexical} and
@code{&i/o-read} is raised.
@end deffn

@node R6RS Output Ports
@subsubsection Output Ports

@deffn {Scheme Procedure} output-port? obj
Returns @code{#t} if the argument is an output port (or a
combined input and output port), @code{#f} otherwise.
@end deffn

@deffn {Scheme Procedure} flush-output-port port
Flushes any buffered output from the buffer of @var{output-port} to the
underlying file, device, or object. The @code{flush-output-port}
procedure returns an unspecified values.
@end deffn

@deffn {Scheme Procedure} open-file-output-port filename
@deffnx {Scheme Procedure} open-file-output-port filename file-options
@deffnx {Scheme Procedure} open-file-output-port filename file-options buffer-mode
@deffnx {Scheme Procedure} open-file-output-port filename file-options buffer-mode maybe-transcoder

@var{maybe-transcoder} must be either a transcoder or @code{#f}.

The @code{open-file-output-port} procedure returns an output port for the named file.

The @var{file-options} argument, which may determine various aspects of
the returned port (@pxref{R6RS File Options}), defaults to the value of
@code{(file-options)}.

The @var{buffer-mode} argument, if supplied,
must be one of the symbols that name a buffer mode.
The @var{buffer-mode} argument defaults to @code{block}.

If @var{maybe-transcoder} is a transcoder, it becomes the transcoder
associated with the port.

If @var{maybe-transcoder} is @code{#f} or absent,
the port will be a binary port and will support the
@code{port-position} and @code{set-port-position!}  operations.
Otherwise the port will be a textual port, and whether it supports
the @code{port-position} and @code{set-port-position!} operations
is implementation-dependent (and possibly transcoder-dependent).
@end deffn

@deffn {Scheme Procedure} standard-output-port
@deffnx {Scheme Procedure} standard-error-port
Returns a fresh binary output port connected to the standard output or
standard error respectively.  Whether the port supports the
@code{port-position} and @code{set-port-position!} operations is
implementation-dependent.
@end deffn

@deffn {Scheme Procedure} current-output-port
@deffnx {Scheme Procedure} current-error-port
These return default textual ports for regular output and error output.
Normally, these default ports are associated with standard output, and
standard error, respectively.  The return value of
@code{current-output-port} can be dynamically re-assigned using the
@code{with-output-to-file} procedure from the @code{io simple (6)}
library (@pxref{rnrs io simple}).  A port returned by one of these
procedures may or may not have an associated transcoder; if it does, the
transcoder is implementation-dependent.
@end deffn

@node R6RS Binary Output
@subsubsection Binary Output

Binary output ports can be created with the procedures below.

@deffn {Scheme Procedure} open-bytevector-output-port [transcoder]
@deffnx {C Function} scm_open_bytevector_output_port (transcoder)
Return two values: a binary output port and a procedure.  The latter
should be called with zero arguments to obtain a bytevector containing
the data accumulated by the port, as illustrated below.

@lisp
(call-with-values
  (lambda ()
    (open-bytevector-output-port))
  (lambda (port get-bytevector)
    (display "hello" port)
    (get-bytevector)))

@result{} #vu8(104 101 108 108 111)
@end lisp

@c FIXME: Update description when implemented.
The @var{transcoder} argument is currently not supported.
@end deffn

@cindex custom binary output ports

@deffn {Scheme Procedure} make-custom-binary-output-port id write! get-position set-position! close
@deffnx {C Function} scm_make_custom_binary_output_port (id, write!, get-position, set-position!, close)
Return a new custom binary output port named @var{id} (a string) whose
output is sunk by invoking @var{write!} and passing it a bytevector, an
index where bytes should be read from this bytevector, and the number of
bytes to be ``written''.  The @code{write!}  procedure must return an
integer indicating the number of bytes actually written; when it is
passed @code{0} as the number of bytes to write, it should behave as
though an end-of-file was sent to the byte sink.

The other arguments are as for @code{make-custom-binary-input-port}
(@pxref{R6RS Binary Input, @code{make-custom-binary-input-port}}).
@end deffn

@cindex binary output
Writing to a binary output port can be done using the following
procedures:

@deffn {Scheme Procedure} put-u8 port octet
@deffnx {C Function} scm_put_u8 (port, octet)
Write @var{octet}, an integer in the 0--255 range, to @var{port}, a
binary output port.
@end deffn

@deffn {Scheme Procedure} put-bytevector port bv [start [count]]
@deffnx {C Function} scm_put_bytevector (port, bv, start, count)
Write the contents of @var{bv} to @var{port}, optionally starting at
index @var{start} and limiting to @var{count} octets.
@end deffn

@node R6RS Textual Output
@subsubsection Textual Output

@deffn {Scheme Procedure} put-char port char
Writes @var{char} to the port. The @code{put-char} procedure returns
an unspecified value.
@end deffn

@deffn {Scheme Procedure} put-string port string
@deffnx {Scheme Procedure} put-string port string start
@deffnx {Scheme Procedure} put-string port string start count

@var{start} and @var{count} must be non-negative exact integer objects.
@var{string} must have a length of at least @math{@var{start} +
@var{count}}.  @var{start} defaults to 0.  @var{count} defaults to
@math{@code{(string-length @var{string})} - @var{start}}$. The
@code{put-string} procedure writes the @var{count} characters of
@var{string} starting at index @var{start} to the port.  The
@code{put-string} procedure returns an unspecified value.
@end deffn

@deffn {Scheme Procedure} put-datum textual-output-port datum
@var{datum} should be a datum value.  The @code{put-datum} procedure
writes an external representation of @var{datum} to
@var{textual-output-port}.  The specific external representation is
implementation-dependent.  However, whenever possible, an implementation
should produce a representation for which @code{get-datum}, when reading
the representation, will return an object equal (in the sense of
@code{equal?}) to @var{datum}.

@quotation Note
  Not all datums may allow producing an external representation for which
  @code{get-datum} will produce an object that is equal to the
  original.  Specifically, NaNs contained in @var{datum} may make
  this impossible.
@end quotation

@quotation Note
  The @code{put-datum} procedure merely writes the external
  representation, but no trailing delimiter.  If @code{put-datum} is
  used to write several subsequent external representations to an
  output port, care should be taken to delimit them properly so they can
  be read back in by subsequent calls to @code{get-datum}.
@end quotation
@end deffn

@node I/O Extensions
@subsection Implementing New Port Types in C

This section describes how to implement a new port type in C.  Although
ports support many operations, as a data structure they present an
opaque interface to the user.  To the port implementor, you have two
additional pieces of information: the port type, which is an opaque
pointer allocated when defining your port type; and a port's ``stream'',
which you allocate when you create a port.

The type code helps you identify which ports are actually yours.  The
``stream'' is the private data associated with that port which you and
only you control.  Get a stream from a port using the @code{SCM_STREAM}
macro.  Note that your port methods are only ever called with ports of
your type.

A port type is created by calling @code{scm_make_port_type}.  Once you
have your port type, you can create ports with @code{scm_c_make_port},
or @code{scm_c_make_port_with_encoding}.

@deftypefun scm_t_port_type* scm_make_port_type (char *name, size_t (*read) (SCM port, SCM dst, size_t start, size_t count), size_t (*write) (SCM port, SCM src, size_t start, size_t count))
Define a new port type.  The @var{name}, @var{read} and @var{write}
parameters are initial values for those port type fields, as described
below.  The other fields are initialized with default values and can be
changed later.
@end deftypefun

@deftypefun SCM scm_c_make_port_with_encoding (scm_t_port_type *type, unsigned long mode_bits, SCM encoding, SCM conversion_strategy, scm_t_bits stream)
@deftypefunx SCM scm_c_make_port (scm_t_port_type *type, unsigned long mode_bits, scm_t_bits stream)
Make a port with the given @var{type}.  The @var{stream} indicates the
private data associated with the port, which your port implementation
may later retrieve with @code{SCM_STREAM}.  The mode bits should include
one or more of the flags @code{SCM_RDNG} or @code{SCM_WRTNG}, indicating
that the port is an input and/or an output port, respectively.  The mode
bits may also include @code{SCM_BUF0} or @code{SCM_BUFLINE}, indicating
that the port should be unbuffered or line-buffered, respectively.  The
default is that the port will be block-buffered.  @xref{Buffering}.

As you would imagine, @var{encoding} and @var{conversion_strategy}
specify the port's initial textual encoding and conversion strategy.
Both are symbols.  @code{scm_c_make_port} is the same as
@code{scm_c_make_port_with_encoding}, except it uses the default port
encoding and conversion strategy.
@end deftypefun

The port type has a number of associate procedures and properties which
collectively implement the port's behavior.  Creating a new port type
mostly involves writing these procedures.

@table @code
@item name
A pointer to a NUL terminated string: the name of the port type.  This
property is initialized via the first argument to
@code{scm_make_port_type}.

@item read
A port's @code{read} implementation fills read buffers.  It should copy
bytes to the supplied bytevector @code{dst}, starting at offset
@code{start} and continuing for @code{count} bytes, returning the number
of bytes read.

@item write
A port's @code{write} implementation flushes write buffers to the
mutable store.  A port's @code{read} implementation fills read buffers.
It should write out bytes from the supplied bytevector @code{src},
starting at offset @code{start} and continuing for @code{count} bytes,
and return the number of bytes that were written.

@item print
Called when @code{write} is called on the port, to print a port
description.  For example, for a file port it may produce something
like: @code{#<input: /etc/passwd 3>}.  Set using

@deftypefun void scm_set_port_print (scm_t_port_type *type, int (*print) (SCM port, SCM dest_port, scm_print_state *pstate))
The first argument @var{port} is the port being printed, the second
argument @var{dest_port} is where its description should go.
@end deftypefun

@item close
Called when the port is closed.  It should free any resources used by
the port.  Set using

@deftypefun void scm_set_port_close (scm_t_port_type *type, void (*close) (SCM port))
@end deftypefun

By default, ports that are garbage collected just go away without
closing.  If your port type needs to release some external resource like
a file descriptor, or needs to make sure that its internal buffers are
flushed even if the port is collected while it was open, then mark the
port type as needing a close on GC.

@deftypefun void scm_set_port_needs_close_on_gc (scm_t_port_type *type, int needs_close_p)
@end deftypefun

@item seek
Set the current position of the port.  Guile will flush read and/or
write buffers before seeking, as appropriate.

@deftypefun void scm_set_port_seek (scm_t_port_type *type, scm_t_off (*seek) (SCM port, scm_t_off offset, int whence))
@end deftypefun

@item truncate
Truncate the port data to be specified length.  Guile will flush buffers
before hand, as appropriate.  Set using

@deftypefun void scm_set_port_truncate (scm_t_port_type *type, void (*truncate) (SCM port, scm_t_off length))
@end deftypefun

@item random_access_p
Determine whether this port is a random-access port.

@cindex random access
Seeking on a random-access port with buffered input, or switching to
writing after reading, will cause the buffered input to be discarded and
Guile will seek the port back the buffered number of bytes.  Likewise
seeking on a random-access port with buffered output, or switching to
reading after writing, will flush pending bytes with a call to the
@code{write} procedure.  @xref{Buffering}.

Indicate to Guile that your port needs this behavior by returning a
nonzero value from your @code{random_access_p} function.  The default
implementation of this function returns nonzero if the port type
supplies a seek implementation.

@deftypefun void scm_set_port_random_access_p (scm_t_port_type *type, int (*random_access_p) (SCM port));
@end deftypefun

@item get_natural_buffer_sizes
Guile will internally attach buffers to ports.  An input port always has
a read buffer and an output port always has a write buffer.
@xref{Buffering}.  A port buffer consists of a bytevector, along with
some cursors into that bytevector denoting where to get and put data.

Port implementations generally don't have to be concerned with
buffering: a port type's @code{read} or @code{write} function will
receive the buffer's bytevector as an argument, along with an offset and
a length into that bytevector, and should then either fill or empty that
bytevector.  However in some cases, port implementations may be able to
provide an appropriate default buffer size to Guile.

@deftypefun void scm_set_port_get_natural_buffer_sizes @
  (scm_t_port_type *type, void (*get_natural_buffer_sizes) (SCM, size_t *read_buf_size, size_t *write_buf_size))
Fill in @var{read_buf_size} and @var{write_buf_size} with an appropriate buffer size for this port, if one is known.
@end deftypefun

File ports implement a @code{get_natural_buffer_sizes} to let the
operating system inform Guile about the appropriate buffer sizes for the
particular file opened by the port.
@end table

@node BOM Handling
@subsection Handling of Unicode byte order marks.
@cindex BOM
@cindex byte order mark

This section documents the finer points of Guile's handling of Unicode
byte order marks (BOMs).  A byte order mark (U+FEFF) is typically found
at the start of a UTF-16 or UTF-32 stream, to allow readers to reliably
determine the byte order.  Occasionally, a BOM is found at the start of
a UTF-8 stream, but this is much less common and not generally
recommended.

Guile attempts to handle BOMs automatically, and in accordance with the
recommendations of the Unicode Standard, when the port encoding is set
to @code{UTF-8}, @code{UTF-16}, or @code{UTF-32}.  In brief, Guile
automatically writes a BOM at the start of a UTF-16 or UTF-32 stream,
and automatically consumes one from the start of a UTF-8, UTF-16, or
UTF-32 stream.

As specified in the Unicode Standard, a BOM is only handled specially at
the start of a stream, and only if the port encoding is set to
@code{UTF-8}, @code{UTF-16} or @code{UTF-32}.  If the port encoding is
set to @code{UTF-16BE}, @code{UTF-16LE}, @code{UTF-32BE}, or
@code{UTF-32LE}, then BOMs are @emph{not} handled specially, and none of
the special handling described in this section applies.

@itemize @bullet
@item
To ensure that Guile will properly detect the byte order of a UTF-16 or
UTF-32 stream, you must perform a textual read before any writes, seeks,
or binary I/O.  Guile will not attempt to read a BOM unless a read is
explicitly requested at the start of the stream.

@item
If a textual write is performed before the first read, then an arbitrary
byte order will be chosen.  Currently, big endian is the default on all
platforms, but that may change in the future.  If you wish to explicitly
control the byte order of an output stream, set the port encoding to
@code{UTF-16BE}, @code{UTF-16LE}, @code{UTF-32BE}, or @code{UTF-32LE},
and explicitly write a BOM (@code{#\xFEFF}) if desired.

@item
If @code{set-port-encoding!} is called in the middle of a stream, Guile
treats this as a new logical ``start of stream'' for purposes of BOM
handling, and will forget about any BOMs that had previously been seen.
Therefore, it may choose a different byte order than had been used
previously.  This is intended to support multiple logical text streams
embedded within a larger binary stream.

@item
Binary I/O operations are not guaranteed to update Guile's notion of
whether the port is at the ``start of the stream'', nor are they
guaranteed to produce or consume BOMs.

@item
For ports that support seeking (e.g. normal files), the input and output
streams are considered linked: if the user reads first, then a BOM will
be consumed (if appropriate), but later writes will @emph{not} produce a
BOM.  Similarly, if the user writes first, then later reads will
@emph{not} consume a BOM.

@item
For ports that are not random access (e.g. pipes, sockets, and
terminals), the input and output streams are considered
@emph{independent} for purposes of BOM handling: the first read will
consume a BOM (if appropriate), and the first write will @emph{also}
produce a BOM (if appropriate).  However, the input and output streams
will always use the same byte order.

@item
Seeks to the beginning of a file will set the ``start of stream'' flags.
Therefore, a subsequent textual read or write will consume or produce a
BOM.  However, unlike @code{set-port-encoding!}, if a byte order had
already been chosen for the port, it will remain in effect after a seek,
and cannot be changed by the presence of a BOM.  Seeks anywhere other
than the beginning of a file clear the ``start of stream'' flags.
@end itemize

@c Local Variables:
@c TeX-master: "guile.texi"
@c End: